#palera1n
1 messages · Page 20 of 1
for some reason i cant get my ipad into DFU mode is that normal?
It doesn’t matter
How long should I be in [*] Waiting for the ramdisk for finish booting??
Is there any command to access dfu or I have to do it myself?
You need to do it by yourself
how do i fix failed to uicache -1 when running all tools in pogo
pins
i'm getting this horrible error and i have no idea what it means
Command "/usr/bin/python3 -u -c "import setuptools, tokenize;file='/tmp/pip-install-qaci12wp/pyliblzfse/setup.py';f=getattr(tokenize, 'open', open)(file);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, file, 'exec'))" install --record /tmp/pip-record-eq8dank0/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /tmp/pip-install-qaci12wp/pyliblzfse/
i literally never use linux
if someone could tell me what it means
sudo ./palera1n.sh --tweaks 15.4.1
The Tweaklist on GitHub are only the ones tested to work In ios 15 right?
Install pip
@marsh halo sudo apt install python3-pip
Yes
Uhhh run sudo apt update then sudo apt upgrade
@marsh halo
Yea
If you get the same error run sudo apt install python3
Then the one with pip
sudo apt install pip
Why the hell when I run the “sudo ./palera1n.sh —tweaks 15.0 —semi-tethered” it shows me “./palera1n.sh: line 228: curl: command not found”?
@unkempt aspen
Oh noooo I almost did it
@silent anchor i done it all
What happened
I opened tips and theres nothing
Last three lines:
Found the USB handle
[===] 100.0%
ERROR: Unable to connect to device
[-] An error occurred
The device woke up instantly during DFU mode, was it supposed to do that?
No
Make sure you did everything correctly
And do the command again
But first put into dfu mode
@unkempt aspen
You need to get DFU right
Volume up volume down side, hold until black, quickly release side and hold side and down for 4 seconds then release side and wait 5-6 seconds
!t dfu
DFU (Device Firmware Upgrade) mode is a mode which allows a device in any condition to be restored to a fresh version of iOS (not to be confused with Recovery Mode). This can also be used to jailbreak using checkra1n and palera1n!
For how to restore in DFU mode, see /tag dfurestore
I don’t have ITunes so there’s no pop up telling me when it’s in DFU. The procedure I followed is this but with 8 seconds at the last step
Does it boot into Recovery or DFU
Because when you are in DFU the phone screen is black
I don’t know, the screen stays black
I’ll try with those 2/3 seconds less
Did it and now it says “connected device is not in DFU mode” so I assume I was doing right
In fact the error pops up during the third time I enter DFU
Third time?
Yes
Hummm
When does the device wake up?
Like immediately?
If yes you are pressing side and vol down for too long I think
No it goes black for like 10/15 secs I think
Count 5 seconds with normal pace, it’s a matter of practice basically
Enter recovery and then dfu
Then just keep trying
That takes like 30 seconds per attempt 🙁🙁
But if you want to try
But the third time, when the error comes, it turns on the instant when the error shows
To enter recovery vol up vol down and maintain side until you enter recovery
Then enter DFU
How do I know when I’m in recovery mode?
Btw what device are you trying to put into dfu
sudo ./palera1n.sh dfuhelper
after you get into recovery
That second one's been a pain. Think that's the solution though..
does filza not work on palera1n?
why it does this
put semi-tethered before the version
is the same
it execute the command like it is without argument
@silent anchor
sorry for the ping
i havent really understood thats why im asking, is the semi tethered that has tweak injection?
late but looks decent
Both have tweak injection
question: if i use palera1n to jailbreak my ipad, could i then use FR to downgrade with the blobs i have? or would that not work atm?
?
Something isn’t working….keep getting image verify failed….iphone7 iOS 15.7. Any ideas?
macOS 11.6.1
If you can jailbreak with palera1n, you don’t need a jailbreak to downgrade at all. All checkm8 devices can have their apnonce set in pwndfu by futurerestore.
oh sweet, is there a tutorial for downgrading using that method on linux?
!t 15to14
Requirements
- A11 and below (iPhone X/8 and older)
- iOS 14.8- Blobs (14.8.1 blobs won’t work)
(If you’ve been on a previous jailbreak with procursus you may have blobs for iOS 14, please check TSS Saver) - Mac / Linux Machine
If you don't have any blobs but meet the rest of the requirements you can [Tether Downgrade](#bot-commands message). Preceed at your risk.
Note
- If you downgrade you will lose Face ID
- You can regain Face ID if you upgrade to a version that doesn’t break Face ID, please see
/tag sepbb
whoops
will this work with 14.7.1 blobs
yes
ok sweet thanks
i also advise that you use gaster instead of ipwndfu
for A8(X) it shows it requires macOS, will the steps work on linux
also is there a tutorial for using gaster
sorry for the questions, not too experienced with this so i wanna make sure i do this right
!t gaster
Hey @blissful dune, have a look at this!
If you're having trouble using ipwndfu or if you're following the iOS 15/16 checkm8 downgrade guide, there is an alternative tool named gaster that you can use to enter pwned DFU mode.
Usage:
- Download and extract the zip for your platform.
- Launch a terminal
cdto the directory you extracted gaster to.- run
cd gaster - run
chmod +x gaster - Connect your device to your PC and enter DFU mode.
- run
./gaster pwn
it only requires macOS if you're attempting to use the tool listed there (which is eclipsa i believe)
oh ok thanks
what if u only have ios 15.7 blob
you can restore to 15.7 fine
what if i wanna downgrade fron that
you need a blob for that version
to use jailbreak
Should I try palera? Im on 15.4.1
Nvm im stupid its for up to 15.3 For now right
up to 15.7.1
The compatibility range in the channel description is outdated, it’s up to 15.7.1
can i use linux on wjndows
:/
you're using such an old version
git pull and try again
Yes with a usb
how
Look on YouTube
get_amfi_out_of_my_way_patch: Found Internal Error: No cdhash found. str loc at 0x39a7cc
get_amfi_out_of_my_way_patch: Found Internal Error: No cdhash found. str ref at 0x12d2da4
- Open up palera1n.sh in a text editor
- Go to line 17, and put an ipsw for the version you’re on from https://appledb.dev in the quotes
- Rerun the script
Anyone know how to solve because it only lets me download palera1n source/repo and mineeks
This is with a iPhone X 15.0.1
Are you sure it’s line 17 and not line 13?
oh it’s been changed to line 13
you used rootless
what even does this solve/what’s even the problem by chance
Is there any way to keep the installed tweak when I jailbreak again?
I’m just gonna ask - are you using tethered
cause it’s broken right now and have yet to understand how it hasn’t even been looked into
emmmm. sure, I'm using tetherd
if you’re using tethered it’s broken and it’s not actually tethered for some reason
Yes, that confused me! When I add "-- semi tethered", the script tells me not to use the "-- semi tethered" parameter, and my device can reboot normally
ty
How to i use it with tweaks?
Guide to installing palera1n
I did this command and this happend…
did you miss the tip above the actual steps for what to do if you have rootless palera1n
What tip?
I’ll try it
I did it all it did was delete Palera1n so I have to restart the steps?
After removing it im trying it again i also restore the rootfs
this fixes Error init failed on 15.7-15.7.1 (devices without those versions on ipsw.me)
really need to use appledb fr
iphone 8 only run it sudo ./palera1n.sh --tweaks <iOS version you're on> that right ?
Just letting y’all know this popped up again…
how hard would it be to pull from AppleDB
also since you’re here, I do have to ask if you would happen to know why tethered is just broken at this point (it’s not tethered)
does anyone know why (on linux btw) it would be stuck on
[libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227 CPID: 0x8010 Found the USB handle. Stage: PATCH ret: true
does anybody know
would i even be able to use this without systemd
now here
please don't use ldid -S, it messes up entitlements, use ldid -s instead
can someone help me? its been stuck like this for 5 minutes
Thanks
will I need to uninstall trollstore before I can use palera1n?
I was able to successfully get the ipad to this point after it extracted Pogo:
[*] Booting ramdisk
usb_timeout: 5
[libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8010
Found the USB handle.
Now you can boot untrusted images.
usb_timeout: 5
[libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
Found the USB handle.
[==================================================] 100.0%
ERROR: Unable to connect to device
[-] An error occurred```
but then something happened and the ipad rebooted
it also did a thing earlier where it said that SEP rejected something
but I have the passcode and touchid and apple wallet disabled
Did you try to run these commands in a seperate terminal before running?
sustemctl stop usbmuxd
sudo usbmuxd -f -p
@change name pls
me?
no, I’m sorry i was trying to reply to them
are there any tricks for reliably getting dfu? I can't seem to get the hang of it
I’m on iphone 6S and i just hold lock and home for 8s and let go. Hold home for 8s. And boom DFU
on my ipad, i need to get the timing perfect it seems
I personally cant get NewTerm 2 to work though keeps crashing. That’s why i came here
i keep getting stuck in this icon
dd: warning: partial read (247 bytes); suggest iflag=fullblock
16374+10 records in
16374+10 records out
4194151 bytes (4.2 MB, 4.0 MiB) copied, 0.761181 s, 5.5 MB/s
img4tool version: 0.197-aca6cf005c94caf135023263cbb5c61a0081804f-RELEASE
Compiled with plist: YES
Found IM4R extracting generator: ok
Saved IM4M to blobs/iPad7,5-15.4.1.shsh2
[*] Creating fakefs, this may take a while (up to 10 minutes)
mount_apfs: volume could not be mounted: No such file or directory```
and then it crashes
That’s wild. My run slid right past that. Hope someone can help you
Notifications are not working on my iPhone X ios 15.7.1 for apps like WhatsApp and Instagram, any ideas if there are some tweaks that I can install via palera1n to fix this?
I finally managed to get it to jailbreak but I had to delete tips and now I can’t install sileo. It just jailbreaks instead of installing pogo. I’ve tried restoring. It wont run the first part of the jailbreak again
Looking for a package manager I can load with alt server
Can I also install palera1n via Virtualbox?
I installed the extension pack when I select my phone and then run the script it says: "Selected Device is not in DFU mode but your Phone in DFU mode"
well i need a way to get the build id from the version number
no idea why it happens, i’d have to rename the snapshot i guess
Oh yeah I didn't know 😂 excuses... did you get it to work
Not yet ,maybe tomorrow
how can I fix Error Installing Bootstrap -1.
running palera1n with semi tethered and had to reboot due to the deep sleep bug. how do i go back to jailbreak without loosing my installed tweaks?
this bootstrap is so annoying
dump blobs and update to 15.6RC or 15.7.1
ok i'll try
i mean, you already use jq 
all process went well atlast got this error img4tool: failed with exception:
[exception]:
what=Failed to read shshFile
code=19529736
line=298
file=main.cpp
commit count=197
iPhone 6S, 15.7.1
running palera1n on macos monterey with semi-tethered flag
first try: stuck on download succeeded
tried again and got this output:
none
none
[*] Booting ramdisk
[*] Waiting for device in DFU mode```
it also booted the phone into ios
same thing happened again but i went back into dfu rather than restarting the script, and got this output before being kicked into ios
```[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
Found the USB handle.
[==================================================] 100.0%
[==================================================] 100.0%
ERROR: Unable to connect to device
[-] An error occurred```
please help inshallah 
Hello, Does any one have a fix for:
[] Device entered DFU!
[] Converting blob
img4tool version: 0.197-aca6cf005c94caf135023263cbb5c61a0081804f
Compiled with plist: YES
img4tool: failed with exception:
[exception]:
what=Failed to read shshFile
code=19529736
line=298
file=main.cpp
commit count=197:
commit sha =aca6cf005c94caf135023263cbb5c61a0081804f:
Hope someone can help me Thank You !
??
?
no
how then
boot linux off a usb
then I get an error when I install git
Can I jailbreak I’m on 15.6
does pwning boot it to ios, if so its either, bad adapter, cable, or port
Is iOS 15.6 able to be jailbroken
Hey, i need help with jailbraking my iphone 7 on ios 15.5. got this error [] Enabling tweaks
[] Getting device info...
ERROR: Unable to connect to device
ERROR: Unable to connect to device
ERROR: Unable to connect to device
jq: error (at <stdin>:1): Cannot index number with string "firmwares"
parse error: Invalid numeric literal at line 1, column 9
You mean just entering pwned dfu with checkm8?
so on my iphone 7 plus i cant have a password
correct
is is a 16gb ipad
No 32gb
do you have 10gb free
Hmu when you find a solution
happened to me first, then i entered a command and my live os got bombed and i needed to reformat the whole usb and install the os again
I got this error on macos. I guess I’ll try with an other system like a live os. Thx!
That’s shit
Hello everyone, an error occurred in the process of using it, can you help?
Why does it always go wrong
you need to be inside the palera1n directory while launching the command
I don't know how, in that directory but I'm sure I downloaded it
after you used: git clone --recursive https://github.com/palera1n/palera1n && cd palera1n. you should be inside the directory off palera1n.
and then you can use ./palera1n.sh --tweaks <your current iOS version>
or if you want to use semi tethered
you can include that in the command
Can I just download palera1n and drag and drop the file into the terminal window?
Clone this repo with git clone --recursive https://github.com/palera1n/palera1n && cd palera1n
I used this command but I don't know, where did it download
No i recomend that you go into terminal paste in: git clone --recursive https://github.com/palera1n/palera1n && cd palera1n
and then do ./palera1n.sh --tweaks <your current iOS version>
I am 15.5beat4, do I need to enter beat4?
tried again with a usb-A cable and i still get booted into ios after "disk4" ejected.
the jailbreak for 15.7.1 support the ipone 11 ?
no
is tehre any jailbreak for iphone 11 ?
@karmic sundial and @nova pulsar i had the same libusb error, have either of you found a fix yet?
no
no
I have palera1n, Can I use zebra?
Can i get some help??
ixhave linucx but how do i jailbreak my phone
please why it does this, it execute the program without - -
It’s possible to use zebra?
Wdym
nope
If I can use Zebra instead os Sileo with palera1n
I'm giving up for now, i'll try again after I get back from break, maybe there would be a commit that could fix it between now and a feek from now
ive been trying to install usbmuxd2 for like an hour now and i keep getting stupid errors like this
i give up too
Help.
i get connected devicr is not in dfu mode
A Useful Package Manager
Thx
Install that
yww
will you ever check pinned
check pinned

literally nothing in pinned solves the problem
including the top/latest pin
all of that is listed on the main tutorial page
[*] Getting Device info...
./palera1in.sh line 436: jq: command not found
Mac OS user
can anyone help?
Install brew first with: ->/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"<-
While im here, I'm having issues on my ipad with palera1n. I successfully jailbreak but when i go to the tips app with pogo and go to install sileo i hit install and "do all" but sileo isnt appearing on the homescreen. Even after a reboot and everything
anyone know what the issue could be?
Im stuck on waiting for the ramdisk to finish booting, help please
let me fix hold on
restart usbmuxd as root, it’s been posted a couple times here
Okay, thanks!
seems like it alrwady was
anyway to have passscode on while in palera1n
or smthing similar to just lock the phone
Fucked up?
Hold In the power button and home button and if you don’t got a home button then it is the volume down I think
For approximately 10-15 secs
You need to install Homebrew and then brew install jq
this now works but stuck at fakefs
I'm stuck at waiting for device in normal mode..
Terminal shows this: "[] Custom kernelcache now exists!
[] Done! Rebooting your device
./palera1n.sh: line 239: 2860 Terminated: 15 "$dir"/iproxy 2222 22
[*] Waiting for device in normal mode" Tried rebooting the phone into normal and DFU mode but nothing’s changing
can i restart my mac and run the whole script again or could this break something?
i restarted the mac and ipad
ctrl c the script
and rerun
in dfu
now i'm at the raindrop and waiting for booting
Same
tysm, it worked :))
how long it normaly takes to boot the first time?
for me after I rerun, from the raindrop to boot around 30sec
Is there a flag in the pailrain script to remove the fake root fs made for booting un-tethered?
filza keep crashing on palera1n jb 15.7
either:
- (in a terminal) run “ldid -s /Applications/Filza.app” (without quotes)
- install Filza via TrollStore (you can use TrollStore installed apps in a jailbroken state, even on 15.5+)
Does Flex 3 beta work on palera1n?
Anyone know why I’m stuck on pale rain logo the rain drop? Just finished running script iPhone 6s 15.7,1
Is anyone else’s “NewTerm” not working? I’m running iOS 15.5 b4 on iPhone 6S
you need to resign it by running (in some way) “ldid -s /Applications/NewTerm.app” (without quotes)
Sileo is black screening and crashing when i open it... any fix?
Redo the jailbreak
I’m having same issue too
!palera1n
guys how do i get the info on download and install guide
ok i found it lol
guys i saw on yt that there is actually tethered v of palera1n and semi one takes up 10GB so how much the tethered one takes and which one should i go for?
tethered doesnt take up any extra space
Who is Xina?
oh tysm!!
tethered doesn't take up any extra space, but you'll need a PC to boot your device each time
meanwhile with semi-tethered you can just boot into an unjailbroken state when without palera1n
ooh thank you
bash: cd: Downloads:I show here that there is no such file or directory
mmm
what do I do
where can i find filza ipa for 15.7?
guys how do i find tethered version of palera1n
the one in the info seems to be semi tethered
okay i think it has both but im stuck with the simple steps
getting this error
tethered is kinda broken right now iirc (it doesn’t properly tether so your tweaks are completely gone after every reboot) - any reason why you’re not using semi-tethered by chance
it's bcs i have an 32gb ip7 as my second phone and don't have 10gb free space 🥴🥴
any help w this maybe?? @solemn verge
updated to 15.7.1 now cant even get pass thru the 2nd stage when it asks me to put the phone into DFU again
forgot to install other stuff :/
do I need to disable passcode before installing palera1n on iphone 7 plus
yes
nice it worked I was stuck in recovery I just kept running the command to install over and over lol
is der a tweak I can use for passcode?
how can i fix this error?
i want to uninstall the tweak because look at the left top its not align perfectly
what are u using for the notch
edge
mine is mrepo.org but you can try other repo
Sileo is black screening and crashing when i open it... any fix? iPhonex 15.6
why o.o
Guy help me, I did run palera1n semi-t on linux successfully and once I opened pogo, hit install and just like that •́ ‿ ,•̀
Ip6s plus
15.7.1
What does this even mean?
how can i fix this?
Looking also for this info… maybe someone has already tried flex tweak with iOS 15.7
alot are not
still dont trust
how do i remove palera1n
it says command ran but nothing happens, i have both terminals open and using usb a to lightning
in reocvery mode using dfuhelper any ideas
Using “—restorerootfs”
palera1n doesnt work for ipad air?
dont work for me
SebastianMadl@MacBook-Pro palera1n % ./palera1n.sh --tweaks 15.7 --restorerootfs
[*] Command ran: ./palera1n.sh --tweaks 15.7 --restorerootfs
palera1n | Version 1.3.0-main-e64957c
Written by Nebula and Mineek | Some code and ramdisk from Nathan | Loader app by Amy
[] Restoring rootfs...
[] Done, your device will boot into iOS now.
doesn't reboot
I did that, then I erased all content and settings. I don’t know if that’s the right way
same at the jailbreaking state, wont boot at the raindrop
don't add --tweaks 15.7 and make sure your device is in recovery, not dfu
I just saw the issues message. So fixing the home button issue for semi-tethered is impossible?!
Sideload an emulator app like Delta, PPSSPP or iNDS
not by an end-user at least. maybe a workaround can be implemented on the side of palera1n devs, but i have no idea
Just use a normal sideloading method you’d use for any other app, only this time the app is an emulator app
That’s what I meant: the devs’ end
why jailbreaking got so "complicated" ios 7 times were best via on device safari JB 🥲
because, y'know, apple likes to patch things
Can you boot palera1n from a usb
i cant download apps in the appstore after using palera1n, anyone know a fix for that?
bind(): Address already in use
Error creating socket for listen port 2222: Address already in use
Creating listening port 2222 for device port 22
[] Waiting for the ramdisk to finish booting
[] Dumping blobs and installing Pogo
sepi digest (20 bytes): fdefe7aedd13b3284e096e0e3480c93fb7ebf3da
sepi nonce (20 bytes): 3250f7ce2e3ffc70ef1103a992fcc48724c22d3e
rsep digest (20 bytes): 0eff7c52c4cb89a7b7d7f47c25ca44c9a5a93f1d
rsep nonce (20 bytes): 3250f7ce2e3ffc70ef1103a992fcc48724c22d3e
16136+248 records in
16375+1 records out
4192026 bytes transferred in 0.306056 secs (13696925 bytes/sec)
img4tool version: 0.197-aca6cf005c94caf135023263cbb5c61a0081804f
Compiled with plist: YES
Found IM4R extracting generator: ok
Saved IM4M to blobs/iPad5,1-15.7.1.shsh2
[*] Creating fakefs, this may take a while (up to 10 minutes)
mount_apfs: volume could not be mounted: No such file or directory
after device reset i stuck at this at a new try
If you mean live booting Linux, yes
Any solution to Firmware trustcache does not exist
Stage: PATCH
ret: true
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8015
Found the USB handle.
Now you can boot untrusted images.
usb_timeout: 5
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
Found the USB handle.
[==================================================] 100.0%
ERROR: Unable to connect to device
[-] An error occurred```
when the error occurs the device immediately pops out of dfu
iphone x, 15.7, tethered/untethered both do not work
running on macOS 13.1 with an m1 max macbook
You using usbc?
usbc and usb a over adapter both do not work

shoutout to palera1n for unironically working and giving my phone cool functionality and interesting quirks 
Why my phone getting back fast from DFU mode like after 20 seconds in DFU mode it turn back on, the cable and everything is in good condition
Had same problem on my M1Pro yesterday… Worked on my old Intel Macbookpro with Ubuntu
So same here
Wanted to let you know.
My iPhone 7 ios 15.7.1 is now Jailbroken !
I Installed Ubuntu on my old Intel MacBookPro.
Everything worked out perfectly!
Had problem with M1Pro MacBookPro because of I think the USB-C to USB-A Adapter (Apple’s)
Thus I used my old Intel MacBookPro on macos but still got problems with reading the shsh2 file
This time using Ubuntu everything went smoothly.
I recommend to just go through Ubuntu/Linux and avoiding USB-C and USB-C adapters
Which intel macbook?
MacBookPro 15 ” Mid 2014
Intel Core i7 4 cores
macOS 11.6.1
anyone can help me? when i do the last command for jailbreak it do nothing
we can try in screenshare if needed
are you using macos or linux
linux (ubuntu)
show the terminal window
it do nothing, I waited
and my phone is on DFU
add --debug and show output
oh the issue is that nighty.link is currently down, you have to wait for it to go back up
im having same issure
it was working
then i recloned
the rep
o
then it stop workin
really?
how long then
:/
@strong ingot so i'm trying to work on a version of deverser for palera1n.
i'm aware that rootless requires sudoworking, but what about logging in as root using openssh?
so my question is, in what cases does normal sudo and logging in as root using openssh work? (fake root, tethered?)
that should work, logging in as root should work for all devices on both rootless and tweaks mode
we don’t know, we don’t maintain nightly.link
i can't test it (yet) 💀
but currently palera1n and futurerestore are broken
Can an iphone 7 plus ios 15.7.1 or lower be jailbroken
yes, but it’s only recommended to use tethered (but tethered is also broken for some reason)
Is tethered any “better” than semi tethered? Tweak wise?
they’re the same
tethered just requires you to boot with a pc every time
but it also doesn’t break the home button on A10-A11
@solemn verge are there directions to do this and do you know if there will be a fix on this
i went on teh pelra1n discord server yes it up
https://ios.cfw.guide/installing-palera1n and I don’t know when tethered is being fixed you can probably ask nebula about it
Guide to installing palera1n
I have iPhone 7 Plus semitether on iOS 15.7.1 and it’s as good as gold all working including the home button, only thing I miss is the locks
ye
you sure you’re using semi-tethered?
So the. Technically right now there is no working jb
what’s the command your running
its working
there is
most people who say this are really just using broken tethered
I know this might piss people off but if tethered is broken how can it be workibg
it isn’t tethered
that’s the issue
Ahh ok
./palera1n —tweaks 15.7.1
ok that’s tethered
palera1n should hijack Settings -> About to indicate what flags were used ngl
you have broken tethered
@strong ingot this is honestly a good idea
kinda like what atmosphere does on the switch
ye
So if i can get an iphone 7plus with ios 15.x for 90 bucks i should go for it
Not worried about the passcode just want a jb phone and i cant jb my iphone 13
yes go for it
hmm i wonder how that would work
Go for it but check the battery health, I replaced mine as it’s getting a little old now
I don’t even think $90 is worth it cost-wise
I got my iPhone 7 on 14.2 for like $50
could maybe be a default tweak installed if directly modifying Settings isn’t feasible
that is possible yes
uhh
i could probably
write a quick tweak
how the fuck would that work though
see what system info does?
yeah but how would it get the information on the args used
malera1n better
oh i guess it could pull from a file
Check lock doesn’t work because of palera1n itself right?
no it’s not updated for 15
this would be better when a boot ramdisk is implemented because it could modify the file every boot
holy shit it worked on like the 8th try
palera1n time
W
linux?
nope
Thank you , will try. Glad you caught back up with me 🍻🍻
did u have an issue of connected device not in dfu mode
i keep getting thst issue
?
with ubuntu
sudo ./palera1n.sh dfuhelper
thx
it gives an error
saying cannot connect to device
@fossil ruin tethered is fixed now by the way
using palera1n on iphone 7 15.6.1, when it says "your device will boot now" it's just a dark screen
it boots normally after being kicked out of recovery, what should i do
😢
what do i do if it doesnt let me go to dfu mode
i hold volune and side button it doesnt work
try again the first command for jailbreak, and it will tell u "are u ready for dfu mode"
the tweaks one?
no the command: "sudo ./palera1n.sh --tweaks <iOS version you're on> "
yh that one
i need help to fix that plz thanks i will sleep
dossnt work
it says unable to connect to device
i did thst at beginning
hmm, then i don't know sry
alr thx anyways
Hello, I’ve did all and it’s saying that… someone know why?
Guys question, how do I update to iOS 15 to jailbreak? Ipsw are not being signed right?
I’m on 14.6
what device even is this
Sorry…I’m on iPhone X
I’m on checkra1n, I want to jb ios15
I mean since you're on IOS 14.6 you should get the option to update to iOS 15.7.1 - if you want to update you can but I'm not sure I'd recommend doing so just due to how iOS 15 is at the moment
Hey guys, can i use palera1n from a usb live linux? Which one do you recomend?
yes and I mean if you wanted to be basic just use Ubuntu or something
I saw you tag me earlier saying that Tethered now works but at the top here it says IOS 15.0 to 15.3.1 with my iphone 7 plus being 15.7.1 will it still work
the top is outdated
speaking of which
@warped horizon hi could you update the description of this channel when you get the chance, thanks.
i don’t have that permission
who does
mods and above
@kind kindle hi could you update the description of this channel when you get the chance, thanks.
It works on A8(X)-A11 devices on all 15.x versions
does this work on iphone 11 pro max ios 15.6
no, that's an A13 device and will never work
ok thanks I'm going to attempt to do the iphone 7. i just have to find those directions you gave me earlier LOL
Guide to installing palera1n
stupid question how do I clone the repo
git clone
but is that something I download or what
just git and nothing else?
just to see what it does
- This isn't DFU
- You didn't type out the correct message to continue with the script
dang what is the message I'm to type out and I will try and do the DFU again
It says type “Yes, do as I say”
“DO YOU UNDERSTAND? TYPE ‘Yes, do as I say’ TO CONTINUE” - #palera1n message
Im planning to use a live bootable usb for LINUX (Ubuntu) will I be encountering some errors or should I just install Linux on my PC?
Ok I have it DFU now and I completely undertand I'm and IDIOT 🙂
you're fine
A VM literally doesn't work
Thanks everyone I got it to work. Now I have another stupid question. When it says it has to be connected to a computer for a restart does that mean when it resprings or just when I turn off then back on
when the device is turned off
thanks. See you all helped an old dog with a new trick. LOL.
works on iphone 7
Cydia 😡😡

No ty
What’s wrong with sileo
Do I gotta disable my pass if I jb on iPhone 8
yes
Can I reenable it after
not while jailbroken
woops i accidentally deleted my disk0s1s1
and now my device is in bootloop
well its a good thing i dont have a lot of data
and I have blobs
I’m unable to boot my iPhone 7, my MacBook is saying “Unable to connect to device”
My MacBook is an old Intel Mac

did it again trying to restore rootfs...
what did you do
how does that happen
i was just trying to boot and it would fail to connect, and figured that maybe a tethered jailbreak wasn’t for me. so now it’s failing to connect again when restoring rootfs
well i thought that the fakefs was on it bc of my log
so i deleted it
It’ll do it no matter what, it just won’t connect.
I think I ran into a problem. I have added some sources and when I went to add a tweak and it respang I'm stuck on a blank screen but when I look at it a certain way it looks like the phone is on
sorry if im being dumb af but what am I supposed to do here im rlly sorry
Use “sudo apt install git” then retry
i'm now stuck in restore mode how do I fix this
@warped horizon can you help me please
I regret trying to even use this... sure it was cool having the phone jailbroken for the first time in it’s nearly 5 years of existing, this definitely is not for me.
what command did you use
i assume you’re using tethered
yes I deleted the non tethered command and used the ios version.
What happened lol
Mmm
Ok I restored my device then did the reinstall of palera1n and now I'm looking at a black screen with a light. How do I remove palera1n
same here, my MacBook keeps on failing to connect to my iPhone
ok back in DFU mode now to figure out what to do
Only thing we can do is restore, that’s it. Literally it.
i think I might have removed palera1n but I'm not 100 percent sure.
getting the phone in DFU mode is a b****
im literally desperate to fix my phone without updating but i don’t have blobs, and i can’t even get irecovery installed, probably because i need linux, not a mac.
Ok I had an error saying unable to connect to device so I tried installing usbmuxd2 on Linux but then I got a libgeneral error so I installed that and now it’s saying libgeneral needs to me version 39 and not 1
wish I could help you @silent anchor but I have officially given up.
K I fixed it and now I got no libplist-2.0 lmao I’m done one dependency after another smh
im done with this jailbreak, and i can’t even fix my damage without erasing everything and going to the latest version of ios
can’t get irecovery, and can’t even jailbreak or restore rootfs. last choice is ios 15.7.1 with nothing.
!t libimobiledevice
Up to date libimobiledevice builds:
- Windows: https://github.com/libimobiledevice-win32/imobiledevice-net/releases
- macOS:
brew install libimobiledevice libirecovery - Linux: https://cadoth.net/~nyuszika7h/ios-builds/libimobiledevice-static-linux.tar.gz
have you tried getting it from here
i have, it says that it can’t find it
so i have done everything i can, and there is nothing i can do except for updating and losing everything
I guess I have seen the negatives of jailbreaking, and I will update, and update everything else I have. also will get my mac on the os where it belongs, macOS High Sierra rather than being beyond it’s latest officially supported version
basically i should use windows now that my macbook will basically be obsolete because nothing has supported macOS 10.13 since 2020.
basically everything that i should do will remain all my apple products as obsolete or just old and i should use android
android has never looked so compelling before, now since my iPhone is too old.
get rid of the url, then try again
UPDATE: somehow my MacBook decided to work and now my iPhone works again.
No updating.
I’m confused what your issue was in the first place
My MacBook was failing to connect to my iPhone when the iPhone was trying to boot into the ramdisk
Done everything now stuck here
Hey guys! I need analyze sileo and substitute debug logs, how to locate this on filesystem??
My friend is trying to jailbreak with palera1n, but we are stuck on the DFU part lol. For some reason, his device won't go into DFU normally (iPad 7th gen). We've tried holding the side & the volume down button, but the screen never goes black. We tried running the command with --dfuhelper as well, and it puts it into recovery, but won't go into DFU. The side button and the volume down button both work fine, so I'm not sure what's wrong
🤦♂️ 🤦♂️ Sorry I'm so dumb, we used the wrong button combo, sorry again
Ok, now we are stuck again:
kex_exchange_identification: read: Connection reset by peer
Connection reset by 127.0.0.1 port 2222
kex_exchange_identification: read: Connection reset by peer
Connection reset by 127.0.0.1 port 2222
I was assuming it might've been doing something related to the fakefs but it's been stuck for about 40 minutes
Newly reset iPad, 8gb / 32gb
This is the icon it’s on, sorry if I’m missing something really obvious
Is there anyway to get out of this?
Oh wait I missed the booting ramdisk text, should I try and ending the script, then booting the ramdisk manually or something?
same
Try hard resetting or entering DFU
That fixed it for me, seems it didn't get too far into the script
resetting the iphone?
I tried entering DFU, failed, and it booted
how u fixed that
I didn't (sadly)
oooo ok sad
I've heard the SSHRD part of the script broke today
Try an older version, or keep waiting ig
😢 when it will comeback
🤷♂️ I hear they are working on it
pretty sure I know the commit that broke palera1n
if you get the specific commit then you can go back one before that and have it working again
u think old commit works?
let me take a look
go code -> download zip
then run it
ok thx i'll try
downloading zip won’t work, you need to run git checkout full_commit_hash_here .
palera1n depends on being run in a git repo. Downloading as zip doesn’t download .git
i'll clone the link
uhhh, I really doubt that’ll work, but, sure
didnt work sadly, hmm do u know how to do
I told you in a message above
what u mean about full commit hash here
the link?
The part that goes after https://github.com/palera1n/palera1n/tree/ in the link
One message removed from a suspended account.
One message removed from a suspended account.
i got same, people up tell me its a bug from the new version
but the old version work fine
BUT ITS INSANE THATS 20MIN I try TO PUT RECOVERY MOD ILL CRY
cuz the old version doesnt put to recovery mod and dfu
One message removed from a suspended account.
i think u need to go on palera1n file and run this command
the hash is 452bd93830353264e5931fb2f5be5d2275fd6ded
One message removed from a suspended account.
yeah i answer u
One message removed from a suspended account.
One message removed from a suspended account.
u need to do "cd palera1n"
my tips app crash
You can’t go back to an old version
Since it’s updated instantly
We just gotta wait for the developers to listen
They don’t care
😦
They said make a git pull but idk how to :/
i do, but my tips app crash
try resign it
do !t tips in the palera1n discord
u have no clue how git works
No that’s no what I meant
Like the actual os boot files
They had been changed
And u can’t go back I
Since
“the actual os boot files” 
they don’t touch any files all palera1n does is patch some stuff like amfi and kernelcache and install pogo
which only persists during that boot
I see
they do care you just don’t know anything about how a jailbreak works
it’s not like a one line fix
you want it just go back a couple commits to two or three days ago
easy
but seeing as you don’t know how to git pull I find it unlikely you’ll figure out how to do that
No ik how to do that I’ll try it
hi im trying to jailbreak my iphone 11 pro ios 15.0.2
on linux
and it always getting stuck at this point
can someone help me?
uhh how do you get wifi on ubuntu
help
Do you have an AMD cpu?
While jailbreaking iPhone 6s 15.5, I get this error:
[*] Creating fakefs, this may take a while (up to 10 minutes)
newfs_apfs: unable to format volume inside /dev/disk0s1: File exists
I tried jailbreaking before but my macbook randomly turned off and I had to restart the process now I can't pass this error.
I'm stuck at
/palera1n.sh: línea 832: 3223 Violación de segmento (`core' generado) "$dir"/pzb -g BuildManifest.plist "$ipswurl"
open a new terminal window and type those 2 commands:
sudo systemctl stop usbmuxd
sudo usbmuxd -f -p
Stuck here, anyone knows why?
there isn't an option in the menu? (top right)
This solved it^
Is it supposed to stay like this for a bit?
it booted but tips app is still normal and not the tweaked one
first of all, you can’t jailbreak an iPhone 11 Pro at all. that’s your issue.
palera1n is currently broken on Linux
its been stuck here and my iPhone has been on the macos hard drive with palera1n logo icon
was probably a bad idea to try palera1n again but im an idiot, which is why im using such an old mac on a daily basis, and jailbreaking my primary device.
at least it’s not as broken as linux with connecting to the device booted to the ramdisk
my macbook stuck is making me realize how good my iphone 6 is still. if it worked with my sim, i’d actually be using it daily.
maybe its stuck at dumping blobs, maybe because the onboard blobs were deleted or something when i first tried this last night
didnt work i try a lot of time, and thats a bug from palera1n and im waiting for an update
yeah real, thats why am waiting for update
Did you fix this?
For me, it crash, i try to re-install but didnt change smt
don’t use linux. use a mac. hackintosh or use a real mac, while im using both. a real mac hackintoshed
how use hackintosh, i need use dualboot if possible
opencore.
opencore legacy patcher is for hackintoshing real macs (like mine, mine is really old), opencore is for hackintoshing.
I found out you need to put into recovery.
And then it’ll prompt you to put into DFU from terminal code
ohh ok old mac
you could use an old mac, mine works, sometimes.
In what steps exactly? I have my phone booted, I run the ./palera1n.sh command with version. It gives me steps to go into DFU and then after that my phone stays on the palera1n logo for 5-10 minutes and then it says done and boots but the tips app stays stock.
it dumped the blobs, but it’s not any farther.
I'll try on my windows computer, i already dualboot with ubuntu but i could be good to have Windows/Ubuntu/MacOs on the same computer
I also get this error when I run it, no idea what it means tho
"2022-11-20 11:18:39.425 system_profiler[6508:76052] SPUSBDevice: IOCreatePlugInInterfaceForService failed 0xe00002be"
look opencore up on google and see.
i figure its because im using such an old mac, rather than using a newer mac
2015 shouldn't be that old imo
You need to put the recovery command. I’ll find the command. Give me a second.
it isn’t, but idk.
I do have a update pending, i'll try updating and retrying after this palera1n logo goes away
./palera1n.sh dfuhelper
should i give up with waiting and try again? or if my phone is alright still, just leave it with trollstore?
Do you run this before "./palera1n.sh --tweaks 15.5 --semi-tethered"?
Yes.
Alrighty, i'll give that a shot and lyk how it goes, thanks.
I’ll help further if not.
Linux got fixed like half an hour ago
git pull
ok thx i'll check
No bc my motherboard doesnt have wifi
I do have a wifi adapter tho
but idk how to use it on ubuntu
Why when I try to boot the phone it keeps itself in a backlit state but it goes no further?
boots fine with ramdisk, stuck on final boot
guys whats the command to delete a system app on an ssh connection
im using sshrd.sh script
like appstore for example
Can anyone help. I'm trying to install palera1n on my ipad pro 10.5 but says it's not in dfu mode even though it is
what do you think dfu is
just send an image of what you have
When you press the power button and home button for some time to get into dfu mode
describe what’s on your screen
why would you need to delete a system app
app store is in rootfs so uhh, not the greatest example
is there a fix for the graphical issues with iPhone X gestures on my iPhone 7?
I had to restart and do painra1n again, unfortunately tips app does not work so Sileo and substitute are not working but TrollStore still works. How do I get Sileo and substitute to work again
ok before I try again I want some questions answered.
1.) When the phone shuts off how do I use the computer to start it up again
2.) are there only certain tweaks that you can use (had my phone jb with palera1n last night installed a tweak and the phone went and stuck in DFU mode and I had to restore it)
3.) Is Palera1n broken right now I read further up that it is but haven't seen if there is a fix
Iphone 7plus IOS 15.7.1 Mac computer with Monterey 12.3.1
thanks to everyone who can imput for me
- same command that you used to initially jailbreak
- some work some don't. either test yourself or ask others
that means you didn't rejailbreak properly, run the script again
If a tweak doesn't work and i need to remove it but my phones in DFU mode how do I do that
this accessory may not be supported it says this on the computer while jailbreaking
what did you do to make your phone stuck in dfu mode, that's like, not really possible?
Ok I installed a tweak called a-font and when my phone resprang it didn't go back to normal it was like it was in DFU mode. black screen but looking like it was on at certain angles. When I tried to get out of it it then went to restore mode and I had to restore the phone. Lost the Jailbreak and everything and when I tried to jb again it kept stopping at one point (sorry I have no pictures as I gave up and this was 10 hours ago)
palera1n should work fine currently
thanks. I might try again but if I can't get it to work I'm going to end up giving up. Don't want to brick the phone which is what I thought I did last night
is there a way to get the iphone 7 in DFU mode that will work. LOL I'm struggling tried 3x and it isn't working 😦
ok I'm done. I can't get the phone in DFU mode 😦 keep seeing the apple logo
Can anyone help me install usbmuxd2 trying to jailbreak my iPhone n it’s not working. I can’t get avahi installed. I use the autogen.sh and it does nothing I’m on Ubuntu btw
feels so cool to have this back, i miss having it ever since i updated from ios 14.2 on my iPod in May 2021.
thats awesome wish I could get this to work for me
it’s the power button and volume down button at the same time, after 5 seconds it’s just the volume down button for about 10 seconds
Made some progress, not sure if it's forwards or backwards but now the tips won't launch at all and just crashes. I am going to try using ./palera1n.sh --restorerootfs and try re-installing it
Hm. Did you complete the tutorial? If so. Make sure you’re going into recovery then DFU
Yea, I am following the steps properly. Device goes into recovery and then gives steps to DFU and then does its thing
Each time it asks to go into DFU put into recovery first. But if tips isn’t opening you did it right. There’s an error on the exploit itself. But I would say restore for sure and try again.
Yea, this is the last chance I am going to give it before I give up. 5-6th time doing this now
i turned off my phone and whenever i try to turn it on, it shows me the recovery screen
palera1n was flashed into my system but i never really installed it through tips
pls help
It means you didn’t complete it.
wdym
No luck, ill try again when they can make it actually work
Don’t worry. I had to restore to 16.1.1. I have my 15.3.1 blobs saved. I’m just busy with hockey and all
I always seem to get the apple logo doesn't matter if it's 10 secs of 7 secs I get the stupid apple logo once I remove my finger from the volume down button
Ok i got it into dfu mode opened terminal did the cd palera1n when i got the mac:palera1n on terminal i typed in ./palera1n.sh —tweaks 15.7.1 now i see this
It’s because you’re not putting your device in recovery then DFU
ok how do I do that
Read here and around this area. I explained it.
@fossil ruin
well I am able to get into recovery mode but the dang DFU mode is throwing me into a frenzy again. Just reboots phone 😦
when I type in the /palera1n.sh dfuhelper in terminal i get no such file or directory
You need to. He in the directory first.
sorry I'm confused in the directory first?
cd palera1n
yep did that
Show me what your terminal says
lol something happened then the dog jumped up on my lap and unplugged my phone guess I gotta start over 🙂 lol
Now i have this
Device?
iphone 7 plus ios 15.7.1
After you ran DFU helper. What did you run?
nothing it put it into recovery mode then screen started moving then i got that message. Phone isnt in dfu or recover now
What usb are you using
usb on the back of my mac
./ not /
usb a
search in the palera1n discord
dont just say it
try solving it first
before asking for help
tried
for an hour
i tried today with linux
and now with mac
same scenario
it always get stuck on "inflating: gaster"
ask in palera1n discord
ok
@silent anchor and @thin notch thank you both so much I think it's working now
all good!
@thin notch taught me it all
I have to write myself some notes for this LOL 🙂
It worked for me. Up until nonce wasn’t set.
now for the next big stupid question. Can I add repos to Sileo like I use to say Zebra or cydia
Never used sileo
@thin notch might know.
yes?
what did you use cause Sileo Nightly is what installed with palera1n
all Cydia, Zebra, and Sileo are are just package managers
they're apt frontends
you can use the same exact repos across all of them, and as long as the basis of the jailbreak supports them, they'll work
you guys have been a great help. Hopefully this is the last question If my phone shuts off or does a random restart (which can happen) I have to do this whole process again right. From connecting to mac opening terminal running cd palera1n then dfu helper code thingy then the palerain ios version (my short hand)
theres a plus button in the sources section
I have a question for before i jailbreak. When i reboot my device, does it go back to rootfs?
My terminal is stuck at creating ramdisk
When trying to jailbreak with palera1n
Been trying to do it for a couple of hours and can’t get past that issue
Anyone know how to fix?
Missing the source that hosts them
Figured that out for AmazonNite
../Linux/PlistBuddy: /lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.29' not found (required by ../Linux/PlistBuddy)
../Linux/PlistBuddy: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by ../Linux/PlistBuddy)
../Linux/PlistBuddy: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.34' not found (required by ../Linux/PlistBuddy)
Version: 3fc8c093f4660f6c6e07c0c9214618733da01ffc - 36
libfragmentzip version: 0.60-120447d0f410dffb49948fa155467fc5d91ca3c8
init pzb: https://updates.cdn-apple.com/2022SummerFCS/fullrestores/012-41763/0BC321DF-1A4E-473B-9EE0-BF126CB1CDA8/iPhone_4.7_P3_15.6_19G71_Restore.ipsw
init done
Error: file Firmware/.trustcache does not exist, or is a directory
[-] An error occurred
``` distro is mint
Anybody have a list of good repos for PR? Can’t remember half of my old ones rn
no, you're just missing a dependency, [[applist]]
Allow extensions to read the list of installed apps
It wouldnt let ne install anything so i restarted my phone and tried to restore rootfs and noe retrying the jb and i think i screwed up
Bro I’m stuck on the same thing
i;m afraid to walk away and have supper incase I need to punch something in
The port keeps being reset for me too and I can’t even exit recovery mode
Got my phone back in regular mode. Going to try 1 more time after supper if I get the same thing I'm a gonna talk to the mods or helpers again.
I just cloned yesterday
Ahh ok so i have to do git pull first
I got mine to work. I used a different port on my pc
Great im going to try tomorrow with the git pull cmd
palera1n gets to booting device 100% done but never exits recovery mode
any ideas?
I’m on ipx 15.6.1
hi , i have iphone 7 running on 15.7.1 , i tried jailbreak using palera1n , but after the whole process it showed the screen to connect the iphone with usb to mac
any help
Try irecovery -n
Hello guys, are AppSync & AFC2 work well with Palera1n?
Need more details
like ??
How far in the process? anything in the terminal?
""
[] Pwning device
usb_timeout: 5
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8010
Found the USB handle.
Stage: RESET
ret: true
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8010
Found the USB handle.
Stage: SPRAY
ret: true
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8010
Found the USB handle.
Stage: SETUP
ret: true
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8010
Found the USB handle.
Stage: PATCH
ret: true
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8010
Found the USB handle.
Now you can boot untrusted images.
[] Resetting DFU state
usb_timeout: 5
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
Found the USB handle.
[*] Booting device
[==================================================] 100.0%
Done!
The device should now boot to iOS
If this is your first time jailbreaking, open Tips app and then press Install
Otherwise, open Tips app and press Do All in the Tools section
If you have any issues, please join the Discord server and ask for help: https://dsc.gg/palera1n
Enjoy!
""

