#palera1n
1 messages · Page 18 of 1
first time (and only time it "sucessfully") i installed it using archinstall the usb wasn't even bootable
sadge
i was sitting there for 10 minutes straight untill i realized it can't even be booted from
also when i booted it using virtualbox because of course that worked nothing was saved
besides basic things
not even kde remained
which i expressly said to install
Will faceID work if I jailbreak? iPhoneX
When using checkra1n on the iPhone 8/X running iOS 14 you will not be able to use any SEP features such as:
- Passcode
- Touch ID/Face ID
- Apple Pay
When in a jailbroken state you can use BioProtect XS to protect your apps with Touch ID/Face ID.
Lockdown Beta and Checkl0ck allows you to use a fake passcode (Checkl0ck includes faceid and other features), but this is not real security, as the protection will disappear if someone simply reboots your phone.
@warped horizon you can change nosep tag to say both 14 and 15?
sure
hello i did some jailbreaks with uncover and taurine and i have upgraded to 15.6.1 and wanted to try palerain. question is how complicated is palerain to run compared to the previous mentioned uncover and taurine?
if you are using windows good luck
otherwise there's an install script but you might need to install some pre-requisites
Can anyone help idk what’s going on? iPhone 7 15.6 MacOS High Sierra
Its always says command not found what do i do?
gonna need more info chum
what are you trying to run
Did you set the script as executable?
Are you in the correct directory?
@strong ingot hey bro, i have A10 devices and 32GB devices (image). Can i install palera1n semi-tethered then?
same w me
I was about to ask...
Do we have to add " --semi-tethered" to the end of the command?
not necessary
On the ios guide it says to but not the git
Isn't semi better since it's not cpu dependant
tethered entails that you need a pc to reboot everytime
this version of semi takes up 5+gb of storage
. is it because of my macos ver?
Oh cool ? Damn
its on 10.12
Also do I not need to add the <> ?
no
Ok
iphone x 15.7 help?
trying again after the new updates and still hmm
Anyone know what to do about iPhone 6s not going into dfu mode after creating fakefs, I hold the volume and power buttons like it says and that doesn’t work and i also tried with home and power since that’s how you do dfu on a 6s which also did not work
do you need to add Sudo bash behind ./palera1n.sh --tweaks 15.6 --semi-tethered?
Did anyone jailbreak their A11- iOS 15.7.1 device with palerain?
How do you undo this jb? I can’t get tips to open. It just closes right away
Can’t seem to uninstall it either
How do I download
I’m having a lot of trouble installing this JB
And I can’t rootfs correctly, Tips won’t go away. And the terminal says no device with udid connected now..
i think a11 is stuck
mine isn't working
Oh, is it iPhone 8 or X?
im on X with issues
x
did you get the jb to work?
a11 isn't really working for anyone it seems
no
i first had forgotton to uninstall trollstore and tips
then did the jb with them still on and now i cant open tips
tried to rootfs, did rootfs clean and now it says it can't connect to my device
Did you use tethered or semi- tethered mode?
i tried both
neither seems to work
Lol
why lol?
Did you receive any errors?
nope, it just said it was going to boot and it never did
just stayed on a black screen
anyone know how to fix absolutely nothing happening
And did you perform this on Linux or Mac os?
mac os
Mine is iPhone 7 on iOS 14.8, after updating it to iOS 15.7.1 I’ll jailbreak that device
i would keep it on 14 their are more tweaks
And I was using checkrain but I guess checkrain iOS 15 support is going to get released in the this year
hopefully palera1n is confusing when i do the command it does nothing and idk why
Is your phone too iPhone 7?
idrk tbh
what does irecovery -n do?
idk
One message removed from a suspended account.
One message removed from a suspended account.
Phone won't start after jailbreak black screen
How do I delete the fakefs volume
That happened to me and I did ./palera1n.sh clean and re-run the command again
How clean
the clean commands just cleans the local boot folder on you pc
It does not remove the JB
Didn't understand
just deletes the previously patched boot and ramdisk utilities
how can this be done
when you run the command again the tools creates those files again
and in my case it started booting
Hey
I’m trying to install but it says conman ran and nothing happens
I have usbmux, libmobileidevice and libirecobery
Also python
And still it’s not working so I’m not sure what I’m doing wrong
ur iphone is A10++ or lower ? , if is A10++ and above, u need disable passcode bf u run jb
How can I solve that?
there is nothing wrong with that
It just stucks. More than an hour maybe
weird, it is just extracting a zip file
I try to jb my phone and everything works until it goes to error: cant connect to device
can I do it manually?
Are you using macOS or Linux
Same here.
macOS, iPhone X 15.1
Can I DM you so I can find out where I’m going wrong?
How does one restore rootfs with palera1n?
Looks i need a Mac because Linux isn't working for me
Is sudo even necessary?
Idk but if I do it without it it say access denied
Same thing happening with me was macOS version are u on?
I’m on Mojave
If i install Mac/Linux on my Windows will it work with jailbreaking my device? 
I think it only works on Catalina and later I found out on the palera1n disc server
But do you have all dependencies?
Yeah
I didn’t, I’m downloading now
unzip
I can clone the GitHub without any dependency
But it’s not working ofcs
Did you download also the libimobiledevice and libirecovery?
I get this far too. But steps 2 and on it doesn’t do anything.
guys can i use ubuntu in virtual machine to install palera1n
unless you use kvm and you setup pci device passthrough, no.
What’s the command for the future restore compatibly sheet?
tag sepbb
update macos
Device:iPhone 7 running iOS 15.7
Using ubuntu 22.04 LTS
sudo ./palera1n.sh --tweaks --semi-tethered 15.7
[*] Command ran: sudo ./palera1n.sh --tweaks --semi-tethered 15.7
palera1n | Version 1.3.0-main-36e5d0c
Written by Nebula and Mineek | Some code and ramdisk from Nathan | Loader app by Amy
[] Getting device info...
[] Creating ramdisk
usb_timeout: 5
[libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8010
Found the USB handle.
Stage: RESET
ret: true
[libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8010
Found the USB handle.
Stage: SPRAY
ret: true
[libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8010
Found the USB handle.
Stage: SETUP
ret: true
[libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8010
Found the USB handle.
Stage: PATCH
ret: true
[libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8010
Found the USB handle.
Now you can boot untrusted images.
img4tool version: 0.197-aca6cf005c94caf135023263cbb5c61a0081804f-RELEASE
Compiled with plist: YES
Saved IM4M to work/IM4M
Version: 3fc8c093f4660f6c6e07c0c9214618733da01ffc - 36
libfragmentzip version: 0.60-120447d0f410dffb49948fa155467fc5d91ca3c8
init pzb: null
Error init failed
[-] An error occurred
is palera1n a dev jailbreak?
not really
Is palera1n stable on 15.7 and are there tweaks?
yes
since it puts my phone in a black screen mode, i tempted to say no
killed my home button 
u cant press it or just touch id?
cant even use it
ironically when i got into settings to experiment it seems touch id somehow detects my finger was on it
just refused to work ig
lmao
seems like firmware mismatch for me
I hate to break it to you but that’s not coming 
Why
Bro usually gives up half way through his projects
He gave up on a iOS 13 jailbreak
When it was like half way done
Deep sleep
They’re eventually gonna update it so that it doesn’t happen
prolly not
Prolly but you’re not sure
no
And live bootable?
How to solve deep sleep bug ? Jailbreak ends in black screen. I restored rootfs and it ens in black screen too. I'm out of ideas... At least i don't care much about this phone. How to fresh jailbrek like stock ?
Not even sure its a deep sleep bug
how to install cydia on palera1n?
So palera1n failed to install on my device because there was no space left so I had to quit out of it and now I only have like 3 gb left on my phone
Is there a way to get rid of those files
you dont
because cydia is broken
okay :(
they’re like the exact same concept
*it works but broken
ok
help me how to fix this?
It shows init:null error while jailbreaking it with —semi-tethered mode
What should I do?
I am on iOS 15.3.1 on a a11
use sudo
reboot and retry, bad dfu
can you send the command you used
Sudo ./palera1n.sh —tweaks 15.3.1
can you send a screenshot of the tips app
go sleep
did I go rootless?
sileo decided rootless for some reason
Anyone make iso bootable palera1n jb like checkra1n for windows ? Please ?
run Ubuntu on usb
this would work
When i run ubuntu my window get corrupted and my windows didn’t boot
you don’t run ubuntu on windows you boot from the usb
^
That’s why i m saying
My windows get corrupted when i do this
Ubuntu won’t touch windows
00000xxx like error
I think it corrupted my boot loader anyone help me via teamviewer ?
Bcz i new to this scenario
Download Ubuntu iso, download rufus, put usb in and load Rufus with iso, boot in bios and set usb as first boot disk, click try ubuntu, open terminal and follow steps
Okay i will try
My device on 15.2 a11
should work
Thnx
👍
Now I’m stuck , the phones not rebooting to iOS
give it some time
wait 5min if not work force restart i think
Well ok I’ll wait more
Deep sleep 
Force restart iPhone
its not
And try again?
what device is this
iPhone 7 iOS 15.7.1
Was that fixed?
Btw is that possible make bootable window palera1n iso like checkra1n for windows ?
could probably just fork odysseyn1x
i dont have a palera1nable device to test on though
If you make this it would be very gr8 ❤️
i'll see what i can do
Thnx for checking my request 🔥
@strong ingot is it possible that I had bad luck and that my device went rootless?
Apparently I’m not the only one
Is there a good video on how to install the palera1n jailbreak? (A9)
im trying to figure out why
Wow, thanks a lot. iPhone 7 Plus 15.7.1 works well very stable
no but there's https://ios.cfw.guide/installing-palera1n
Guide to installing palera1n
alright
Do you have any idea how can I fix that?
its working palera1n?
Yes, very well.
Ok fine because i have the same device with 15.6.1
please ping me when you have pushed an update or found a fix. I would really appreciate that
@slow hawk did you have rootless before
Yes, although I have not tried any tweaks, just installing ipa’s
U have cydia on? Or not atm
palera1n does not include cydia
oh ok thanks for info
I am using silo & TrollStore
@strong ingot also strange, the pogo installed in tips gives amfi patch error, but the pogo on my homescreen installs sileo sucessefully
btw i'm alt of @slow hawk
Is it tethered or semi-tethered?
semi-tethered if you have 10gb to spare
Is there a way to use filza on iPhone 7 ios 15.7.1 without jailbreak?
I have it installed on iPhone 7 Plus 15.7.1 Filza
How?
Here, for iPhone 7 ios 15.7.1 it shows error init failed right after it’s done with the ramdisk
On both Linux and Mac
Did you face such type of errors?
I had issues with my Mac book pro m1 but it worked in my old intel MacBook Pro. Did you clone the latest palera1n repo and enter the full messages to confirm when installing from the terminal?
Yes
—semi-tethered mode
Too
It creates the 10 gb ramdisk
I just used the —tweaks
But after that it shows the build manifest error
Plus the version of IOS
Yes same full command
./palera1n.sh —tweaks —semi-tethered 15.7.1
You should upload the install log from the palera1n folder, maybe one of the devs can help
./palera1n.sh —tweaks 15.7.1 worked for me
Put into dfu mode and follow the instructions
So did this install tethered or semi-tethered?
Semi-tethered I believe
What was the macOS version that finally jailbroke your phone?
That would be big sur
I had done it on catalina and Ubuntu 20.04.05
Not sure that the Mac version would make a difference
As long as you have the prerequisites that are needed its just the usb connection and terminal
So this is what happens to me currently when I try to jb..
Then the phone screen goes black and doesn't boot
Yes cause even for previous jailbreak and downgrades it had got to do with the lib mobile device and the lib mux and it used to differ on Ubuntu and Mac OS
The little troll guy doesn't popup either
I had issues for a while, I deleted the repo from my pc and ran through the instructions on palera1n GitHub , recloned the repo this morning and started fresh
When I done mine, i went through part of the install and the around half way I had to follow the instructions and put into dfu again, once tha completed the install continued and phone rebooted and completed
DM me if you know a lot about this jailbreak
yea that part didnt happen for me, it just goes black after those cmd lines and i have to manually reset the phone
I need help
i literally only got this thing to work once in the very beginning last night, then it all went to shit
i forgot i had left trollstore and its stuff on there, so after i did the jb tips wouldnt open
then i did the clean cmd and it couldnt find my phone
wound up factory resetting and now tips opens again but im now in the situation above..
I would try deleting the cloned repo from your pc, then download the repo again and start again. My tips was messed up and would not start and it still worked once I cloned the repo again this morning
ok
i have iph8 15.6 is it safe to jailbreak i mean is palera1n stable
DM me if you know a lot about this jailbreak
go to palera1n's discord and create a thread in #support if you need help with an issue, don't spam here
Invite?
it's on their github
i have
Can anyone send the newest link for palera1n
Nv
Can anyone send a link for a tutorial
now i just have to wait?
Do u have for windows 10
No, unfortunately
It’s ok
Use Virtual machine I think It can work
Ok
Ok
No, VM won't work
Why not?
Why rootless? You can have rootful
Because checkm8 doesn't work through a VM unless there's a passthrough configured, which can only be done on Linux afaik.
Oh ok sad for u @shadow flame
I don't think you understand. This jailbreak is rootful. If you use a rootless jailbreak, you won't have tweaks.
Live booting from USB works and is literally easier than a VM.
palera1n uses substitute to inject tweaks
substitute does not work on rootless
therefore tweaks do not work on rootless
It appears you're on to something, Robin..
Rootful jailbreak - can have access to rootfs, so most tweaks work.
Rootless jailbreak - can't have access to rootfs, so almost none tweaks work.
Did you know how does It work?
Download a distro (Ubuntu is recommended), install it on a USB using Rufus, boot with USB.
Go into palera1n's discord and create a thread in #support with more details
Sure, thank you for your help 🙂
Any idea how to fix this?
Did anyone experience this error with the dfuhelper?
Can sideloaded filza work with rootless mode?
Along with access of root files
Or is there any ssh tool to grep and replace root file from phone and vice versa?
seems like the binary is messed up never seen this issue? what arch is your computer running
the binary works on x86_64
With the --debug flag i only get this
which is the best one for this?
/var/ access, yes, / access, no, because it's literally rootless
you can't replace root files unless you jailbreak with palera1n tethered, or create a fake rootfs aka --semi-tethered option in palera1n
place the ipsw on line 14 of the script, it tells you what to do
where do i get the ipsw... because i cant find for the iphone x the 15.7.1 ipsw
Does checkl0ck work semi tethered with tweaks?
no, lockdown does tho
hmm.
What are the requirements for this jailbreak
it tells you in the script
considering using palera1n as I’m fine with semi tethered (had to use checkra1n for a while) but I like Face ID
iOS 15.x and a checkm8 compatible device
So not sure
How do I know if the last part works
yeah, lockdown doesn't have Face ID, at least yet
Or if I have it
Don’t think it will
Your device has to have A11 processor or older (A10, A9, so on)
is it a11?
Basically iPhone X or older
thanks, i found it one moment before you sayed it 🙂
does this mean I'm not able to run this on a raspberry pi? They are using arm
ok thx
@strong ingot still not working
._.
from apples cdn
it worked, thanks 🙂
I keep getting this error when I hit install...
is that fugu15?
or what is that
Palera1n
why does the above say this when palera1n works on 15.7
also isnt it semi tethered now
need update
anybody know how i can fix the bootstrap error?
does the semi-tethered work on 15.7 A9 Device?
is it a 16 gb device?
How does semi teathered work?
@strong ingot any updates about random rootless
how can i install tweaks?
Through sileo…
i can’t
maybe i’m doing something wrong cause i’ve never used sileo, only cydia on iOS 12 and 6
Well can you send ss of error?
Or what it says when you try to install tweak
Btw one thing could be that the tweak your trying to download is incompatible atm
Is anyone getting stuck on ramdisk?
i’ve seen the compatibility of tweaks on iOS 15 on the palera1n website
You sure it’s compatible?
yea a fix will be made
we found the issue
My phone stays black but the script sayed
Done!
The device should now boot to iOS
Could be random rootless
how can i fix this?
You can’t, you gotta wait till palera1n gets updated
Or you can try reinstalling palera1n
tf is "batteryboobs" lol
idk lol
but i wanna try it 😉
For my device, iPhone 7 ios 15.7.1, palerain’s tethered one worked flawlessly.
./palerain.sh —tweaks 15.7.1
In case if anyone faces errors, do the following
- ./palerain.sh —restorerootfs
- Terminate all the processes or restart the device
- Delete palerain folder, even from recycle bin
- Clone fresh repo,install and then run palerain
Follow these above steps after every error like disk ejection, init failed, file exists during ram disk creation.
Also, the sideloaded ios 15.1.1 filza ipa works till ios 15.7.1, only you need is a jailbroken device with tweaks or root support.
yeyy
My phone ran out of storage somehow while installing palera1n and now it’s stuck on the trollface apple thing. what do i do to free up some space for this
I'm getting same issue here
Press power and volume down button until the apple logo appears and then boot back into dfu
Then follow these steps
alright trying that bow
How do you uninstall palera1n?
I tried it, so it's good now?
nothing has happened yet, how long does it take?
Unplug the device from usb
And then do it
Press those two buttons for 10 or more seconds
also tried that
I'm having the issue that the tips app is directly crashing after clicking on it
same lol
If you are unjailbroken then uninstall and reinstall tips app
do I need to remove the fakefs for this?
just so we’re on the same page, i should be doing this on this screen, right? (picture taken before doing this)
yea
alright
itll give dfu instructions halfway through
@surreal badge
once the process is done, lmk if you get past install
Yes now press those buttons hard
It should restart
yea
Which iPhone is it?
6s 32gb
Did you use semi mode?
Which error did you receive?
I did not recive any it just chrashes
Cause for my iPhone 7 ios 15.7.1 128gb, semi gave me error after ram disk creation which was init failed one
would you remove the fakefs and redo the process?
Now see, delete palerain folder permanently, restart device and then install palerain again
I’ll tell you after this
Do I need to type in the command "./palera1n.sh" or "./palera1n.sh --tweaks 15.5"?
i already restored rootfs
Mine 10gb is already taken, the last one that worked was default one (tethered)
—tweaks 15.7.1
The second one
i'm gonna try tethered
You're a lot helpful, thank you so much again
how do I boot again if i have to restart
Just use the default command —tweaks 15.x
I just jailbroke for enabling x gestures via filza and then entered dfu mode to restore the rootfs
i held the buttons for a minute and nothing happened.. are you sure its volume down and power
There is a command to boot this tethered jailbreak
Which iPhone is it?
6s
Does the home button work when you switch off the phone?
If not then it’s power and home button
yep it was that
im going to factory reset to free up this space. are there any side effects to just doing that like bricking?
Just restore it via iTunes
And then you are 100% safe
alright
Backup data first
do i need to backup data if i just want this to be like a brand new iphone?
Means copy the media, files manually
To the computer
Else if you have enough space in iCloud then upload it
whatll happen if i dont backup? is it just all of my data and apps that are gone or is the phone useless
i just want this phone completely wiped of everything
Only your data, apps and preferences will go away
Yeah then iTunes restore is for that purpose
alright ill do that
As you guys probably solved like a million times. I am having the init error. Is there any way to fix this issue. I saw that you need the ipsw url. But have no idea what to do with it
Init failed error right?
Follow this one
Even I had received the same error via semi mode
And have used Mac OS for this purpose
Check your dm
im still stuck with the Bstrap issue. should i restore my phone?
I am always reboot the iPad when reaches command "./sshrd.sh 15.6" how to fix?
Disabled his passcode and enter dfu already
i cant install the tips app again, it isnt on my phone and cant be installed through app store
./palera1n.sh --tweaks 15.7.1 --semi-tethered --debug
any way to run palera1n on WSL?
You must use Linux boot on USB
okay, thank you.
How can you solve the error Error init failed?
With palera1n being not rootless, this means that we can expect more tweaks that aren’t updated to work on IOS 15 ?
yes
me when palera1n deletes known_hosts 
ok, terminal is telling me that my device should boot into ios, but its just a gray screen. do i just wait or did i do something wrong?
guys i have an issue where the terminal is saying seputil: failed to load /mnt1/usr/standlone/firmware/sep-firmware.img4 in mode
any ideas
I think so
@surreal badge sorry for ping but it successfully installed and now my phone is sitting on a gray screen
Screenshot
Could I duel boot Linux to Jb?
Yes, but I recommend Mac though
I was stuck here
I unplugged an restarted my phone
What should I have done here
The only Mac I have is on high sierra
Then?
do i unplug the phone for it to boot to ios?
Type, python —version and python3 —version
If it’s 3 or higher then you can run it
It only Works on Catalina and later
Oh, so had they mentioned that too or what?
@surreal badge any ideas?
Is it semi or tethered?
I saw it on the palera1n Discord server
i put it on tethered
semi
nvm
semi
tethered
this shits hard lol
Ok now see, delete palerain completely, restart the device both iPhone and Mac and reinstall palerain, after that enter this command, ./palerain.sh —tweaks 15.x
You got an error that’s why have to do this process
i got the screenshots here
should i do this"./palerain.sh —tweaks 15.x" while my phone is plugged or unplugged
Yeah so did it boot?
still gray
Plugged
but i want my phone semi
But first uninstall palerain and restart device
should i try semi
k
Yes try that this time
alright
Now manually press the buttons to restart the iPhone
Now after restart, open tips app and either press do all or install button
then now this is my problem 😦
tips app is just normal tips app? what
Did you use semi?
Yes
yes
Apple tips app
Restart device, reinstall palerain and then use this —tweaks 15.x only command
What?
what device the pc or phone?
and what command like this sudo ./palera1n.sh --tweaks 15.x
Yes x is the sub version
Like 15.7.1
Try jailbreaking again
First restorerootfs and then jailbreak
but im on 15.7 is that okay
do i use —restorerootfs for that?
Yes, mine is 15.7.1
Yes
@charred marsh , this time use —tweaks 15.x one
its started
Now, protect the room from earthquake until it jailbreaks
no semi-tether? im using a family member’s mac to jb and i dont have access to it at all times :(
@surreal badge Do you know why i am stuck on this: "[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227 CPID: 0x8011 Found the USB handle. Stage: PATCH ret: true" ? nebula say it is the bad dfu but i try many times and always same error
Live with a different family or make a girlfriend for Mac but do it
use ./palera1n.sh recovery to get dfu
Now you can boot untrusted images.
usb_timeout: 5
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
Found the USB handle.
[==================================================] 100.0%
ERROR: Unable to connect to device
[-] An error occurred
and password is disable
damn 👍
does anyone know the reason?
its like the third time i try
Is there any error after it, and are you using Mac?
no and yes
mac yes, ventura
but no error just repeat same message always
yesterday i waited 20 and 30 minutes many times, only repeat the same
Lol
thought it was meant for me lmao
Device and iOS version?
ipad 7,3 on latest 15.7.1
You also have the same problem
Mine never say "Now you can boot untrusted images." only the stage PATCH message
Oh I see a DM
now what happen?
Try without —semi-tethered
Okay
Terminate this terminal
without semitethered it should be tethered tho
But then I need to use my Mac to boot everytime right?
idk if thats a good idea
Yes
Extra security
yes
Use Mac, or special version like x
How do I boot it when it’s just tethered?
hello , my tips app is crashing even if i restored fs
i dont have mac
can some one please help me instal palerna ?
i try it later because im going to school💀
what if you uninstall and reinstall tips
doesnt let me lmao
guys i am trying to put my phone into dfu mode but after 1-2 minutes it automatically breaks out of dfu mode as it should do if it was jailbroken but it is not , the restore fs was done , what can i do??
Put your device in recovery first, then in dfu
this is crazy
just dfu lol
https://twitter.com/foxfortmobile/status/1592153703913750529?s=46&t=WHWEqiCZZ4bcyFRB2ei41A bro did not dump onboards
i updated my device to latest ios 15.7.1 via DFU restore in Finder since it was completely messed up and useless in that state. goodbye ios 15.3.1. i'll wait for more stability in palera1n before trying it again.
are you available to help me with my palerain issue? i sent you a DM
Is there a vid on how to get Linux
(palera1n literally does it)
i asked them what messed up and they didnt even say what
💀
don’t use palera1n if you can’t get Linux working
bad idea
Well I don’t 100% know
it’s a developer jailbreak, I don’t recommend it
a while
Oh
Hey, I want to jailbreak my phone with palera1n, so I want the tips app to be returned to stock. Should I uninstall trollstore first?
u shouldn’t have to dump blobs to use a jailbreak 
[*] Creating fakefs, this may take a while (up to 10 minutes)
newfs_apfs: unable to format volume inside /dev/disk0s1: File exists
is this a problem?
does anyone have a tut for mac the one on their git and the other website r not helpful at all
i wish i had my just click one button jailbreak like checkra1n
anyone know how to fix this?
i mean it already does it for you
because you ran the ramdisk twice
Dereks-MacBook-Pro:palera1n deepalms$ ./palera1n.sh --tweaks 15.2 --semi-tethered
[*] Command ran: ./palera1n.sh --tweaks 15.2 --semi-tethered
Dereks-MacBook-Pro:palera1n derekpalmer$
When I run this. It stops and puts my phone into normal mode. But it ends the script there. Any idea why
update macos
Is there a way to have a password set when jailbreaking on a10x as blackbird exploit exists
no
To Ventura I go. Thank you
monterey works too if you dont want to go to ventura yet (just saying, ventura is fine though)
please check dms nebula
if you get blackbird working then sure
which
uh
is a low chance
i dont do dm support
Catalina is too low then?
That’s what I’m on. So. I’m behind on it all 🤣
sudo add-apt-repository universe
sudo apt-get update
sudo apt install libimobiledevice-utils libusbmuxd-tools git curl python3-pip -y
Libssl.so.1.1 error fix:
wget http://nz2.archive.ubuntu.com/ubuntu/pool/main/o/openssl/libssl1.1_1.1.1f-1ubuntu2.16_amd64.deb
sudo dpkg -i libssl1.1_1.1.1f-1ubuntu2.16_amd64.deb
Fix SSH/USB issues:
sudo systemctl stop usbmuxd
sudo usbmuxd -p -f
It will be initialized
Leave it minimized
*Make sure it is not shutdown & it should NOT show that a device was removed. If so, re-run the command after closing the pervious terminal.
If you are stuck in recovery mode:
sudo ./irecovery -n
these are the steps im following
if you can figure out how blackbird works then go for it
yes
Lucky you lol. Emma replied which I was thankful for.
yeah posting any issues here is better
because i dont know anything about palera1n
all i am doing is sudo ./palera1n.sh --tweaks <iOS version you're on> --semi-tethered and it runs the ramdisk twice
The same issuse as me
yeah idk
is anyone getting the issue where it keeps on saying connection failed
and followed with the number 5
barely know what im doing so no way i can bug fix myself
Because I have failed before, it said Error init failed
Could you please tell me how to fix this ? Thanks.
this is new so i dont expect it to be perfect
@hallow kiln did u install pogo from the trollstore?
wishing i just stayed on ios 13 💀
those are literally the step by step instructions
using linux is a headache
I failed like this, and it seems like this happened when I use ./palera1n.sh --tweaks 15.7 --semi-tethered command.
use 15.6 not 15.7
same
doesn’t matter
open the script in a text editor and look at line 14

Downloads/palera1n/palera1n.sh
hey guys
i was able to succefully install the 'jailbreak' but my tips is just crashing
everytime i open it
any suggestions
i give up
semi tethered this is my problem now
are you jailbroken
I successfully run apfs_deletefs disk0s1s8
How can I exit ssh and then go to dfu mode?
reboot and go to dfu
I updated my macOS and this is what I’m getting.
on 15.5, do i need to remove --tweaks from the command ?
After the jailbreak, did it ask to put the phone in dfu mode?
in my time it was not possible to use several tweaks on palera1n such as watusi does anyone know if it's still like this?
I got same error using semi-tethered, on iPhone 7 ios 15.7.1, but the jailbreak was successfully installed without the —semi-tethered flag
does 15.5 support tweaks?
Ugh.
just give up
yeah it kept showing me a black screen
blank
i oculdnt do antyhign
after it said that my device was able to boot up
@surreal badge
My phone keeps booting when it asks me to put into DFU mode one final time. It’s weird
Yesterday I tried for almost 5 hours to execute this script over and over again and it worked for the last time, but I don't know why it failed before, just like the errors in these pictures😓
Can anyone tell me if palera1n is already better? because the first time I used it, the tweaks didn't work right, it was one or the other that worked
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8015
Found the USB handle.
Now you can boot untrusted images.
usb_timeout: 5
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
Found the USB handle.
[==================================================] 100.0%
ERROR: Unable to connect to device
[-] An error occurred
no idea where it went wrong.. when i look at the script, it's not giving me any clues as to why or what its trying to pull that'll cause it to fail
Did your device automatically reboot into the normal system at this point?
yes
so just to confirm if i do everything right this won't turn my phone into a paperweight
Did you enter the recovery mode first and then the DFU mode?
chances are, you'll mess something up
like?
it just mentions DFU but, whats the difference in recovery mode going first because this is news to me
i have futurerestore, i have palera1n, i've done the weird usb thing
recovery mode is just normal mode right?
no
I found last night that entering dfu from recovery mode has a higher chance of success here. Directly into DFU mode here will often automatically reboot to the normal system
there is normal mode recovery mode dfu mode
how do i go into recovery?
impossible to
this is news to me
you can just restore
device??
iphone x
press the volume up arrow then the volume down arrow both very quickly
then
hold the side button until you see the recovery mode screen
just keep holding it
so, don't press the volume down?
it looks like if i am somehow missing shit it download it automatically
this is not very descriptive in what you mean
yeah, so it's similar to the DFU mode?
because it said i was missing things and i somehow forgot to install pip so i did and now it's working
different you cant do much from recovery mode
get into recovery mode
then do ./palera1n.sh dfuhelper
very simple
iirc dfu mode is special because it doesn't boot any of the shit that protects the os
to get into DFU i press volume up, down, side button until black screen then hold volume down for 5 seconds, then remove side button and that puts into DFU
no not really correct
you can just exploit checkm8 from dfu
nope
press up
then press down
then hold side button
to get to recovery
why don't we tell people "just use google"
always go from recovery into dfu
gives them an important skill
because iphone x has dep sleep bug
The same problem...I run without —semi-tethered.
because googling "how to use palera1n????" wont show much
create support post in palera1n server
no, i meant the "how to put phone into dfu mode"
but be honest most people who dont know how to put a phone into dfu who are trying to use this tool will do that
how can i found palera1n server?
also is it normal for my terminal to be "stuck" at download succeeded
github
im following your steps and it's just restarting my phone
volume up
volume down
correct
yep
even when the apple logo shows?
ok. then do i go into dfu from there? with the volume up, down, side button, black screen, hold volume down and side button 5 seconds, release side button?
or is the restore all i need?
it worked, thank you samm
use palera1n
./palera1n.sh dfuhelper
a lot easier
only works from recovery
okay so i paste that into terminal when im in the palerain cd?
jq: error (at <stdin>:1): Cannot index number with string "firmwares"
parse error: Invalid numeric literal at line 1, column 9
what does this mean
that only happens if your device isnt connected
yes in the palera1n folder
before that wouldve been a bunch of lines saying cannot connect to device
nope, only "getting device info"
yea
[*] Command ran: sudo ./palera1n.sh --tweaks 15.6.1 --semi-tethered
palera1n | Version 1.3.0-main-19be77c
Written by Nebula and Mineek | Some code and ramdisk from Nathan | Loader app by Amy
[*] Getting device info...
support post in palera1n server
the dfuhelper command is literally just a script that helps you time it?
i'd think there would be a way to force the device info dfu mode lol
like make one?
mhm
nope there isnt
checkra1n wouldve used it if there was
what happens when it boots my phone and it asks me to enter DFU mode as one of the final steps? do i paste that code in there again? or how do i get back into DFU mode?
is there any tools to see if dfu mode is on besides this
seems to be working
I can't find github issue, and I post this to his Twitter
your mac tells yous
not like linux has itunes
you go back to dfu
plus the script will tell you
forgot to clarify
- github has the discord invite, 2. it isnt an individual person and most of the people on the team go by she
the script feels too fast, plus itunes told me it worked when i was in windows
right, do i paste the code you gave me ? to go into recovery?
You need to enter recovery mode , and then enter dfu mode again
use the command to go to dfu
okay
Normally it is necessary to enter twice, and then it is very close to the final step
[*] Creating fakefs, this may take a while (up to 10 minutes)
all good
Thanks~
[*] Waiting for device to reconnect in recovery mode
I don't understand why there is any difference between entering dfu mode directly and entering dfu mode from recovery mode, they are both recognized as the same mode on itunes, but the results are very different in this script
manually put it in recovery
i could use checkrain lol
there is a difference, entering dfu directly often messes things up (such as causing touch to not work)
checkrain allows you to still go into recovery mode
you can if you want
no need. recovery mode is easier than dfu lol
applying patch=0x1800c832c : 1f2003d5
main: Writing out patched file to work/iBEC.patched...
main: Quitting...
none
krnl
this normal?
i hope so
is this a "if you divert your attention for 4 seconds you are fucked" or a "yea just leave it there and let it be" thing
it’s fine
no clue how to fix
can i redo? or eh>?
how long should this take
is it just sat there?
restore to 15.6 RC
yea but i don't have any other ways of self entertainment
is there a tutorial for that? haven't done that in a bit.
and i don't want to risk fucking something up
go to idevicecentral signing chart
not normal to just sit there
put. your device in
find 15.6 RC (15.7 RC DOES NOT WORK) and press on the blue text to the right of it
like it doesn’t just get stuck there
that’s something that takes half a second
it's on extracting work/Pogo/Pogo/Payload/Pogo.app/PkgInfo
i assume that's not meant to be fast?
downloading it now. assuming ill open it when it completes the download?
the fucking terminal just closed
crash 
nope google how to restore from ipsw
okay thanks again
all good
It looks like it's going to be a long road again
do i just run the thing again or
it is indeed.. but it's midnight and im determined
mhm
restore will take about 20-30 mins
so how long in total should this take
i assume the additional 10 is creating fakefs?
