#palera1n
1 messages ¡ Page 13 of 1
ok
have a nice day/afternoon/night/whatever
seems to work at a first glance. haven't tested it longer than 10 minutes, but that's definitely an improvement đ
no idea, as i said i only tested it for a few minutes yet. i personally don't really care about it since this is just my dev phone for tweak development. but according to some reddit users, there shouldn't be any (noticeable) battery drain with inosleep
@strong ingot i think the usbmuxd the main problem in my situation
is there another way to restart the usbmuxd
tweak injection into apps doesn't work yet, correct?
how am i supposed to install inosleep when sileo says its up to 12.9
it still works on 15
but doesn't show in repo
it's on packix
its empty
no, it's not? https://repo.packix.com
works fine for me
refresh sources maybe?
could not find release file
sounds like you are in rootless mode. i had that problem before. still no idea what caused it, but completely re-jailbreaking fixed it (e.g. removing the palerain folder and loading it fresh from github / resetting the repo).
ah its only rootless
ah lol
haha, well of course it will only work on the tweak branch đ
it's good to have it, since this way I can update my tweaks for 15 before the 15.4 JB drops
no you have to resign it with no-sandbox ents
as my iphone is purely an experimental device, can i downgrade it to 15.3, make a full-ish jailbreak and install project sandcastle next to it?
im on a10
@strong ingot
hi
bruh
@stiff jolt dawg we arenât bashing you weâre just saying thereâs no point
- your fork literally just adds those thinfs
is it normal to have so many issues getting into DFU mode
it takes me like 10 tries to succeed once
otherwise it just boot loops after recovery mode
is that still a cable issue?
@strong ingot would you mind helping me with my issue?
I'm on M1 Macbook pro, connecting via an adapter + lightning to usb cable (old apple one). I cant get past the Creating Ramdisk step now.
Ipad 10.5 pro (A10X), iOS 15.2, whats the next step i should try?
Does this support iPhone 13 Pro
No.
run binaries/Darwin/gaster pwn and tell me the output
Quick question when ramdisk is patched, what exactly is being patched? ASR? and what else?
you keep asking these questions you can read the code
tr
s in the code it's written what it paches from the .dmg to final ramdisk? correct?
Are we not supposed to ask questions?
no no itâs fine to ask
but i was just saying
the ramdisk is just an ssh ramdisk
Oh okay you scared me for a sec..lol
I keep on coming back to you because you are well versed on the subject, and I am a noob
did i do something wrong here
ty btw!
@silent anchor did you touch anything with gaster
If it helps, the one time (the first time) that it got past this step, it resulted in:
[] Device entered DFU!
[] Creating ramdisk
Archive: gaster-Darwin.zip
inflating: gaster
Do let me know if you think i should be trying other cables though, I am using an apple mfi one, but im not sure if thats causing any issues too
will try now!
sry im dumb, how do i import this successfully on mac lol
i did this but shouldnt this file change?
no its in DFU mode but ill try again
DFU (Device Firmware Upgrade) mode is a mode which allows a device in any condition to be restored to a fresh version of iOS (not to be confused with Recovery Mode). This can also be used to jailbreak using checkra1n and palera1n!
For how to restore in DFU mode, see /tag dfurestore
that obviously wont work
what mode should it be in?
dfu
yeah it was in dfu haha thats what i meant
yea its pwning
what should i do now? just run the script as normal and try again?
yes
wtf is wrong with this ipad, its literally in DFU mode
I can only do palera1n on macos and linux right? not windows?
not windows
any suggestions for ^?
Its in DFU Mode otherwise it woudlnt have run the other command lol
hold on
ok!
show the output of system_profiler SPUSBDataType | grep DFU
how can i run that? sorry im not too familiar with this
just paste it in the terminal
its not returning anything đŚ
ill retry everyting from the start
@strong ingot do you have a script i can use to reliably get into DFU mode, its difficult on this ipad unfortunately
./palera1n.sh dfuhelper
mac doesnt detect it in dfu then
ugh
i tested it with checkra1n as well, since it lets me know if i successfully went into DFU, and it does
so not sure whats causing the discrepancy
@strong ingot ive done nothing special this time but it somehow just started working, but i fear im just stuck on this
that is so weird
yeah this is what happened the first time i ran the script and got this far
were there other people that were able to fix this?
i havent seen this issue on macos
youve only seen this on linux?
any idea what i can do here?
try binaries/Darwin/gaster pwn
so i exit this right? since its just stuck?
just to clarify, i have to redo the DFU process right?
the ipad is still seemingly in DFU mode but clearly its not working haha
no
gaster is trolling
skull
hold on
oki
chmod first?
ya its just like
i donno
the ipad state hasnt changed
but i get
@autumn egret any idea why gaster isnt detecting device
tried like 3 versions of gaster
uhh, idk. let me try latest on my mac
i just tried again, but now i run into this
last time i solved it by having to reclone the repo
i can try cloning the repo again and using this new gaster
Yeah same thing, clean download, replaced gaster with the one you sent (latest) and still stuck
lemmekno if u had any luck đ
well, i can't exactly run palera1n cause my device is on 14
but i can run gaster itself
so are tweaks supported on 15.5?
no
hmm
How to enable tweaks in iOS 15.5b4 or how to downgrade this iOS to 15.3.1 without shsh blobs?
Tweaks arent available on newer versions than 15.3.1
doesnt work
@shut stone do i follow these steps on the semi tethered?
only up until step 5
ok
how do i check if its in dfu
i dont have itunes on linux boot
do i say yes when it asks me for tweaks (ios 15.6.1)
im not sure
quick report: left the phone unattended for ~11 hours. phone is still in jailbroken mode, so deep sleep bug definitely seems to be gone. had about 20% battery loss, although I'm not sure how much of this is actually caused by iNoSleep, since this phone only has 83% battery health.
wich phone do u have
battery state with no deepsleep bug
how much battery health %?
86%
But for some reason it has increased, so now it is displayed as 90%.
then i guess there is at least some noticeable battery drain with inosleep. it's not that bad considering that it disables deep sleep, but some people might not like it. losing 20% in about 12 hours is not bad, not great.
yes. I think so, too.
Someone said inosleep makes sleep a working state, but it almost certainly causes battery drain.
definitely worth it for me. not having to rejailbreak every 10 minutes is definitely better đ although im only using this device for dev purposes
Yes. I am receiving the same message
usb c?
normal usb A cable
fair
but i cant connect to it
ran with sudo and it worked. lol
Just install dra1n
To see
no offense, but wasn't dra1n completely useless since it just measures battery loss since a specific tweak install, therefore not really giving you any indication to what is actually causing it unless you install tweaks one by one and then wait a few hours/days?
Used palera1n rootless
Done!
The device should now boot to ios
If u already ran ........
If not ,pogo should be installed in tips app .
Device is not booting its in blank mode screen is blank ( black and little violet in ) . if i force boot then booting , tips app opening but no pogo inside it
For me this works because there are very few tweaks for 15 so helps pinpoint and if used right it does work
quite thhe opposite for me
Why is device not booting to ios .đ˘
What is ur issue my process went successful but device not booting if force boot in tips app no pogo loader
first it only displayed errors on my phone
and now its stuck in dfu
guess ill restore and update
using itunes
Guide to fix libssl1.1 errors
- Make sure you're CD'd into the palera1n folder.
- Run:
curl 'https://cadoth.net/~nyuszika7h/ios-builds/libimobiledevice-static-linux-20220921.tar.zst' | tar -C binaries/Linux --zstd -xf - - Run
./palera1n.sh clean - Run palera1n how you normally would.
is there any recommended crash reporter for 15? I'm not always on my Macbook and would like to read symbolicated logs either on the phone directly or on my Windows computer
if it doesnt work?
bc it doesnt work
;/
yes
Cr4shed
and cr4shed works reliably? it didn't work on iOS 14 for me, sometimes crashlogs would randomly not show up
Why I used deb to crash springboard to show it works
Watch again look date time
I'm not saying that it doesn't catch crashes at all, I'm saying that specific (or random?) crashes don't show up sometimes
My bad miss read
I havenât experienced that but for me works for testing stuff
I assume injecting into daemons doesn't work yet either, right?
<Error> 14:25:25 kernel_task[0]: Sandbox: mediaserverd(3463) deny(1) file-map-executable /Library/MobileSubstrate/DynamicLibraries/BetterAlarm.dylib
No
and this is the same reason why injecting into sandboxed apps doesn't work, yes?
Yes
aight, thanks
Wlcm
I guess it need sandbox patch
Did any of you try to use Aemulo with iOS 15 using palera1n?
yes doesnt work crashes
For me it just says cannot connect to nfcd
lol idk it crashes me on x
dawg because you pirated it probably
I'm using the trial one
act no i piad for it
yea it works with sandbox patches but we donât have those yet
ok thanks
try the trial version
iâm guessing the full version canât interface with apple pay cards
and itâs causing a crash
i did to double check still crashes
Should I do a tethered downgrade to ios 14 to use unc0ver or taurine?
you canât use u0 tether downgraded
Do you think it's worth it with the sep stuff?
so taurine
what device and is it a secondary device
and what ios is it on now
it's not secondary it's iPhone X running at iOS 15.2 right now
you shouldnât tether downgrade a main device
It has a chance to brick?
no but what if youâre out not by a computer and your phone kernel panics
but youâre lost so you have to call someone
but you canât
- all of the other sep stuff
@strong ingot https://github.com/palera1n/palera1n opinions on the new commits?
nice
just next time you merge pull requests can you squash and merge
it looks better on the history
Hi! Does iNoSleep work on rootless (iOS 15.6 RC)? I think no but I'm not sure.
no
Thank u
@shut stone I just updated to palera1n 1.2.0 but my tips app doesn't get replaced with Pogo, Where can I get the latest Pogo ipa?
@shut stone yea it just copies the folder to tips it doesnt replace it
it replaces it for me
like i just used it
on macOS
is this linux or macos
atleast
macos
tf
I do but it's not installed to tips
no rootless support anymore
why
why tf doesnt it extract correctly
and why does it do it correctly for me
@strong ingot it copies inside of loader.app?
like loader.app/Pogo.app?
yes
⯠hfsplus ramdisk.dmg addall Pogo/uwu
folder: /usr
folder: /usr/local
folder: /usr/local/bin
folder: /usr/local/bin/loader.app
folder: /usr/local/bin/loader.app/Pogo.app
file: /usr/local/bin/loader.app/Pogo.app/safemode.deb
Giving permissions to /usr/local/bin/loader.app/Pogo.app/safemode.deb
file: /usr/local/bin/loader.app/Pogo.app/org.coolstar.sileo_2.4_iphoneos-arm64.deb
Giving permissions to /usr/local/bin/loader.app/Pogo.app/org.coolstar.sileo_2.4_iphoneos-arm64.deb
trolled
thats just linux
i did cp -R Pogo/Pogo/Payload/Pogo.app Pogo/usr/local/bin/loader.app
im on macos
why are u using hfsplus then
to test
wait can u test the normal darwin section
yea but im going to do it manually because i cant find my usb a cable
would this fix it @strong ingot ?
like just put /* at the end of rm
and then copy it with /*
ok lemme commit
ok i commited it
lemme update submodule
@wooden sable try again after running git pull
I'm trying it now
Didn't work đŚ I think my Tips apps have a problem
I will try to reinstall
try to reinstall what? iOS or Tips?
tips
did u EVER remove it and reinstalled it?
Yes
because that can also be problematic for some bizarre reason
but @wooden sable
just install the ipa tbh
with trollstore
np
@shut stone good
epic
i worked like 3 hours on it only to reliaze i was still strapping to preboot

but after i fixed that it all worked
just fixed it
Is the deep sleep issue fixed?
yes
should be
ok I'll test
are you using rootless or tweaks
tweaks
paste these into newterm
nvram boot-args="-v keepsyms=1 debug=0x2014e launchd_unsecure_cache=1 launchd_missing_exec_no_panic=1 amfi=0xff amfi_allow_any_signature=1 amfi_get_out_of_my_way=1 amfi_allow_research=1 amfi_unrestrict_task_for_pid=1 amfi_unrestricted_local_signing=1 cs_enforcement_disable=1 pmap_cs_allow_modified_code_pages=1 pmap_cs_enforce_coretrust=0 pmap_cs_unrestrict_pmap_cs_disable=1 -unsafe_kernel_text dtrace_dof_mode=1 panic-wait-forever=1 -panic_notify cs_debug=1 PE_i_can_has_debugger=1"
then sync
ok
ok I'll just do that
If it doesn't get device info around 2 minutes replug and run the script again
@strong ingot Only for clarity is deep sleep bug fixed also in rootless?
should
Great! I will try on my iPhone X with iOS 15.6 RC.
Get the deep sleep bug fix
This only applies if you jailbroke before the fix (10/16/22).
Rootless:
Run ./palera1n.sh clean then jailbreak again.
Tweaks:
Open NewTerm, then paste in the command from the pastebin.
https://pastebin.com/raw/hrFvYz8Y
What cable are you using?
USB-C?
normal usb?
I don't know then
Are you using mac?
Can you see the device in finder?
I'm getting "failed to uicache -1" after I rejailbreak and press Do All in Pogo
click install first
ok
Error Installing Bootstrap -1
Are you trying to install rootless?
Is your device in DFU mode?
yea that isnt the issue
it isnt downloading gaster or gaster is looping
exit the script and run binaries/Linux/gaster pwn
ERROR: No device found!
ERROR: No device found!
ERROR: No device found!
binaries/Darwin/gaster pwn
are you trying to use rootless
yes
yes
put it in dfu
@silent anchor
curl -sLO https://nightly.link/verygenericname/gaster/workflows/makefile/main/gaster-Darwin.zip
unzip gaster-Darwin.zip
mv gaster binaries/Darwin/
rm -rf gaster gaster-Darwin.zip```
once you put it in dfu run sudo ./palera1n.sh --dfu 15.6.1
or whatever version youre on
i think i have to install libreadline.so.7
how do i get this
i cant find it on google
does it say you need that
/home/mint/palera1n/binaries/Linux/irecovery: error while loading shared libraries: libreadline.so.7: cannot open shared object file: No such file or directory
is what it says
For some reason I get this error in NewTerm 2
@silent anchor these arent completly static
how am i if i dont get any display output
what
my gpu is ass
huh
skull issue
it doesnt give display on mint installed
debian
solus
and 2 others
maybe an old nvidia gpu is better
⯠ldd binaries/Linux/irecovery
not a dynamic executable
@strong ingot I get this error when I'm opening NewTerm 2 can you help please?
are you on rootless
No
thats weird
I never got it before
i hate my gpu no linux distro works
I will try to restore rootfs
@silent anchor lemme know if. you got it to work on macos haha
my gaster wont load đ
@strong ingot I used ./palera1n.sh --dfu 15.6 --no-install but deep sleep bug is still present. Now to remove bug is necessary installing Pogo?
did you ./palera1n.sh clean first
Whatâs palera1n
a tethered jailbreak for checkm8 devices on 15.0-15.3.1
O sick
Yo nebula i installed ubuntu wich graphics driver do i get from amd website
The one thatâs for your brand of gpu? For example if u got an AMD one get that one if u get an Nvidia one get that
You mean semi,
?
Yeah
Wich download ofc
Theres like 6 linux downloads for my hd 7870
Idk that havenât used Linux
Same thats why im asking
Its here but no tweaks
Iâm aware
Ah k
Just try them all ig
My 8 is on 15.0.1
My x is on 15.6.1
My only phone is on iOS 12.5.5
Thats my old phone on aswel
I wish I wouldâve left my 13 on a lower version of iOS 15 because I feel like at any time now theyâll be able to breach it
I delete folder and git clone again.
Me waiting patiently for the developers to take their time and not stress themselves instead of begging

What is it on ? đ
ok
Because if anything is found for 16 itâll be 16.0
also is that safari 15.6.1 exploit useful for jb?
Or beta
Yeah, that too
Have you saved blobs before you updated?
nah
i didnt even know what that was until a month after
Didnât even think about it
Same
Looks like there are no CVEs for 16.0.1-16.0.3, so it doesn't matter if you're on 16.0 or 16.0.3
Either way itâs gonna be a long time
yes
i just check around my area every day maybe someone has an iphone on ios 14
Uncover isnt checkm8 is it?
iPhone X 15.6.1 works great
no it isn't
and it only supports up to 14.3 on devices pre-a12
Sorry, do you have tweak or rootless on iPhone X?
15.6.1 is rootless
if you don't have a root access to you phones filesystem
its pretty self explanatory if you understand how unix like systems work
Are tweaks in the root section?
whar
Nothing
Me just trying to understand something
And failing like all my french tests
@strong ingot My wifi is always greyed when using palera1n, is that normal?
what ios version
15.2
ok
palera1n won't install substrate 15.3.1 yes i used the tweak flag
yes i used the tips thing
Ight so i figured out why
for some reason even when i use the tweak flag it will still close the script after im done with curl and shit
Whatâs the terminal command to put iPhone in dfu
you have to use a button combination
pretty much all existing tools are built with the idea we have root access, so since iOS 15 prevents root access the tools that give you tweak injection need to be updated
no terminal command, buttons only
There is a terminal command and itâs ./Palera1n.sh dfuhelper Just took me a minute to find it.
that doesn't put your device in dfu... it's just a timer and instructions
that's not what you asked for
I have a problem on my iPhone X (aka iPhone 10,6) with iOS 15.7 (19H12).
Help I just rebuilt usbmuxd from source and it's still not finding my phone
Solved! Changing line curl -LO https://nightly.link/elihwyma/Pogo/workflows/build/root/Pogo.zip into https://nightly.link/elihwyma/Pogo/workflows/build/main/Pogo.zip in sshrd.sh.
true
rebuilt or did you use usbmuxd2
Orion tweak can use in iOS 15?
anyone test it ?
@strong ingot where can I download the wifi firmware for palera1n? I couldn't find it anywhere
I will try to fix the greyed wifi issue for iOS 15.2

wdym
but not all wok will crash
Both
Works every time
Is iPadOS 15.6 jailbreakable (ipad air 2)
yea no tweaks tho
= trollstore but 15.5 RC
Is it worth it?
idk thats your choice
Is it as safe ? Ofc never 100% but like is it high risk?
50/50
50% bricking chance?
no like 1%
Tnx I'm kinda new to whole jailbreaking thing and don't know much :(
He is not talking abt trollstore
He is talking about jailbreaking an ipad air 2 on iOS 15.6
Np :)
I made an iPhone 3G and an iPhone 4 dead by resetting the device (no sim)
what is it
what's the fix
pull and plug?
Yeah so it's just not finding my phone at all
I've tried usbmuxd built in to Ubuntu and I've tried building usbmuxd2 and installing
if i brick my ipad will I be able to unbrick it google says I can but idk if that's reliable...
it wont brick
at worst you'd have to restore to the latest ios
Alr tnx nebula for helping me ^^
@strong ingot I have a11 device and in instructions its mentioned after using palera1n on a11 device we need to force boot . ok I force booted but in tips app there is no pogo loader and if i install it manually using troll store then there is an error inside pogo loader . if i re jailbreak using palera1n then tips app is crashing
why in the world are you direct pinging kekw
so, irecovery sees the device and can get its info
so whats the big deal
after compiling these fuckers from source and installing, finally got palera1n working lmao
so wait
how long should the ramdisk take to boot
also do i put the version ID or the version number kekw
Right so it's now looping on this.
15.6 RC
and it just grey screened lmao
Check pins
For those on 15.5 and above that have the same issue, follow this^ (should be pinned tbh)
and suddenly no device found
Could not connect to lockdownd: Mux error (-8)
what device is this
iphone 8, gsm
disable your passcode if not already
Is a12 supported?
you can try Stocks
or Podcasts
No, it can do any useless app
you just have to change one line
look for tipsdir=
and change from Tips.app to Stocks.app
hopefully you didn't invest in AAPL stocks 'cause that'll be inaccessible
np
đ
?

what are you trying to do?
you already did the app
the stocks app
if you do any other app it probably won't work
so whatever you're doing is not working
what are you doing though?
it can be fixed
one of many ways, delete - reinstall.. reset all content and settings, update etc
Hi @silent anchor! Does your iPhone still suffer deepsleep bug?
Do you have an iPhone X?
What iOS version are you using?
Me too.
@silent anchor Last question. Do you have an iPhone 10,6 or iPhone 10,3?
@silent anchor is your iPhone refurbished or second hand?
Okay, thank u. I have an iPhone X with iOS 15.6 like you. But it still suffers from deepsleep bug I don't know why maybe because it is refurbished.
hello does this work on iphone 11 ios 15.3
no??
no
use TV
guys any news abt jailbreak for ios 15.7?
So I'm not the only one.
should i jailbreak my iphone x (ios 15.6rc) with palera1n or just wait for tweeks to be released? or what ?
you could take advantage of it
tweak support is only up to 15.3.1 if iâm not mistaken so using palera1n wouldnât do much for them cause they want tweaks right?
i mean some tweaks /may/ or may not work but at least you have code execution
thereâs no tweak injection on 15.4+ yet
what good tweaks r there that support palera1n/rootless? i was considering jbing using Fugu when it came out but it seems to be still a while away so is it worth jbing using palera1n or should i just wait for fugu?
meaning, despite no tweak injection you can use other tools
might not be as fun and somewhat complex but interesting nonetheless
like what
Well, was going to say host a minecraft server đ
w-
no seriously if u jailbreak no tweek whatu gain?
Root access
root
jailbreaking is more than just tweaks
can u explain more pls?
you have the ability to do anything you'd like with it, you can run tools, store stuff, create stuff, etc
yeye like wich tools thats what iment
is palera1n not rootless?
no
you can use lockdown beta if you want
ok
keep in mind its a tethered jb
Every time I want to turn on my cell phone, I must use irecovery -n?
yeah i know thatâs why i was putting it off but since itâs just for my ipad which i only use for youtube and never shut off it should be fine
no you must run palera1n
irecovery -n restores rootfs
yea
thx
Hello !! little question what happens if I push iPhone 10,6 out of dfu after sleep bug ? should I use ./palera1n.sh to boot jailbroken again ? or can I just boot normally ?
./plaera1n.sh --dfu 15.X*
just boot again like you did last time
is there going to be much of major differences between rootless palera1n and fugu15?
besides ota install?
actually just realised probably no one knows mb
yes
palera1n only ever be tethered or semi tethered, fugu15 will only ever be semi-untethered
fugu15 also wonât support tweaks while palera1n will
I used --tweaks but the script dies after its done booting, why?
i just said the logs folder
Yeah well it never gave errors it just said enjoy and shit but doesn't do the tweak part
There
thats the latest log?
lol
wuat
what ios version are you on
./palera1n.sh --tweaks 15.3.1
ERROR: Unable to connect to device
imma git clone it again i fucked up smt i think
sudo ./palera1n.sh --tweaks 15.3.1
justinbouchard@MacBook-Air-de-Justin-2 ~ % cd rain
justinbouchard@MacBook-Air-de-Justin-2 rain % cd palera1n
justinbouchard@MacBook-Air-de-Justin-2 palera1n % sudo ./palera1n.sh --tweaks 15.3.1
Password:
shell-init: error retrieving current directory: getcwd: cannot access parent directories: Bad file descriptor
job-working-directory: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
job-working-directory: error retrieving current directory: getcwd: cannot access parent directories: Bad file descriptor
pwd: error retrieving current directory: getcwd: cannot access parent directories: Invalid argument
[*] Command ran: sudo ./palera1n.sh --tweaks 15.3.1
git cloned it again and now it seems to run
hdiutil: couldn't eject "disk4" - Resource busy
[-] An error occurred
i LOVE macos
an error occured
is what is exactly says
restore rootfs and it says the same thing
I got it working
But i can't find the tips app and every not system apps crash on launch
I found it but it says i gotta update it
fuckk
I had it working just fine before
the system apps crash is not fixable as of now
will be fixed soon
once we use release kernels
But on older palera1n version it wasn't a probelm
i had it running for me, it ran just fine n shit
yeah i was
i had installed pogo n shit
i had the like pink tweak that made some text pink n shit
no clue then
so wait, do appstore apps not work with palera1n installed or am i missing something

Lel
oh didn't know Fugu wouldn't support tweaks
15.1 Carrierizer2 worked to me
sadge am on 15.6 lol
Lol 2%
Bye
I don't know if this was supposed to be normal, every tweak I install seems to work
My phone turns on and off normally without the pc
But when doing so, the jailbreak exits
Ive a IPhone 7
My friend @fresh quarry has a 7 plus which is also like this
He went back to 14.3, I continued on 15.1
I installed a tweak for shutdown without jailbreak, everything is fine
Appdata
Im happy, thx Palera1n đĽş
is there any theming tweaks that work on palera1n tethered?
I have a11 device and in instructions its mentioned after using palera1n on a11 device we need to force boot . ok I force booted but in tips app there is no pogo loader and if i install it by manually using troll store then there is an error inside pogo loader . if i re jailbreak using palera1n then tips app is crashing
pls help
rootless , not tweaks branch
no, as they need to be fixed for 15 really
damn okay, guess iâll just have to wait
thanks
@silent anchor When you run ./palera1n.sh clean the script delete (rm) the folder that starts with boot-... So to create again boot files you must run ./palera1n.sh --dfu 15.6 --no-install. The lattest option avoid reinstalling Pogo. Anyway you must use tweaks branch and not rootless because the fix is in version 1.2.0 on tweaks while on rootless is 1.0.0.
yes
Well if you use git clone -b tweaks --recursive https://github.com/palera1n/palera1n && cd palera1n. And then inside folder you must run palera1n without --tweaks because your iOS version is over 15.3.1. So it must be rootless.
Definitively yes
You must put your device in DFU mode before running ./palera1n --dfu 15.6 --no-install. Have you already install Pogo?
guys like if i jailbroke my iphone x ios 15.6 rc and with no tweeks and then after they anouce that its with tweeks how can i update it?
Did you restore your iPhone?
@silent anchor So if you open Tips it crashes?
@silent anchor Okay, I asked this because if you restore your iPhone and you use palera1n with --no-install you start your device with patches but not installing Pogo.
So to summarize:
1 - git clone -b tweaks --recursive https://github.com/palera1n/palera1n && cd palera1n
2 - Put iPhone in DFU mode (this is a manual operation)
3 - ./palera1n.sh --dfu 15.6 --no-install
Open Tips and press Install if your first time otherwise press Tools > Do All.
@silent anchor remove blizzardboard
because it's been known to bootloop
just want you safe
I think you must use ./palera1n.sh --restorerootfs to clean and then you can run a "new version" (maybe in Python) of palera1n.
Be careful that to support tweaks on iOS 15-15.7 (betas and RC) without rootless it is necessary to write inside /. This is achieved remounting with RW permissions (now in iOS 15-15.3.1 I think they use mount -uw /). Another solution is create a new APFS container (like logical partition) and use it as root (/) with RW permission. This solution "eats" free space from iDevice because you "duplicate" root partition.
@silent anchor The last thing is also with palera1n 1.2.0 I encountered deepsleep bug.
Even if we have the same iPhone (10,6) with the same iOS version you can try maybe you are luckier than me.
But I think that the problem is with Kernel64Patcher -o â I know it is strange because this simple tool calculates an offset with respect to kernel base and then applies a patch â used to patch kernelcache and not with the bootarg wdt=-1 now removed but prevously added when palera1n patches iBEC.
In any case let me know if you are able to do it or not. I'm curious.
alr be
all restorerootfs does is restores the OS back to before it was jailbroken
Oh, I've almost forgotten if you try with tweaks branch for rootless and you restored your iDevice or this is the first time, palera1n maybe won't work.
This because palera1n and ramdisk repo are not "aligned".
To understand this compare https://github.com/palera1n/palera1n/blob/421dda3e2f88f831621929137c4ac87194d76093/palera1n.sh#L332, https://github.com/palera1n/palera1n/blob/421dda3e2f88f831621929137c4ac87194d76093/palera1n.sh#L375 and https://github.com/palera1n/ramdisk/blob/ac01cbc345071607ad47deaa1073fa085beac36e/sshrd.sh#L159. It is clear that sshrd.sh won't install Pogo files and so cp will fail.
Even if you will remove if [ ! "$2" = 'rootless' ]; then Pogo inside Tips will probably fail. To solve see #palera1n message.
I write this because it seems that rootless branch is outdated with respect to tweaks. So in my opinion I prefer using an updated branch. But to avoid headache rootless branch is safer if you don't understand BASH programming.
Discord is the easiest way to communicate over voice, video, and text. Chat, hang out, and stay close with your friends and communities.
iOS 15.0-15.3.1 tethered checkm8 "jailbreak" (rootless is 15.0-15.7 semi-tethered, no tweaks) - palera1n/palera1n.sh at 421dda3e2f88f831621929137c4ac87194d76093 ¡ palera1n/palera1n
tried to manually installed pogo using trollstore as in tips app there is no pogo . but in trollstore inside pogo selected install but getting error failed with -1 are u sure you have Amfi patched?
Pogo will not work without palera1n
that error means you either didn't run palera1n beforehand at all or palera1n failed
@dark crater ^
i have ran palera1n and it said done device will boot
pogo installed inside tips app
i have a11 device and i force booted device, in tips app no pogo so I installed manually using troll store , i got that error
i have ran palera1n in dfu mode only , is it possible to run in normal mode or recovery mode. if possible can u tell commands for them?
it's impossible to run from any other mode if you're using tweaks branch. Not sure if it's possible to run from normal mode in rootless anymore.
no I'm unable to boot in normal mode getting error i just removed --dfu from command and ran in normal not worked
same in recovery mode also .
rootless:-after booting ramdisk. it exited automatically again i ran the command in dfu then it converted blob then exited, i again ran command in dfu then it said pwning , booting after that nothing happened after few minutes got done pogo inside tips app etc . exited i force booted and no pogo inside tips app idk why it's happening even after no errors
./palera1n.sh dfuhelper or https://youtu.be/LzTHH9tqVoo
You need kernel patches to remount rootfs as r/w anyways (on release)
wdt=-1 is just to disable the watchdog timer
I know I'm severely late to this 
I didnât know. Thank u. For curiosity, does a full bootarg list with descriptions or comments exist?
Even if do you use another APFS container?
Yes
You need mac_mount and mac_dounmount and apfs_vfsop_mount patches
Need patches to be able to remount the rootfs.. root directly from the rootfs of a "sealed" volume
etc..
?
Are they system calls?

this is mac_mount patch
// This patch makes sure that we can remount the rootfs and that we can UNION mount
// we first search for a pretty unique instruction movz/orr w9, 0x1ffe
// then we search for a tbnz w*, 5, * (0x20 is MNT_UNION) and nop it
// After that we search for a ldrb w8, [x8, 0x71] and replace it with a movz x8, 0
// at 0x70 there are the flags and MNT_ROOTFS is 0x00004000 -> 0x4000 >> 8 -> 0x40 -> bit 6 -> the check is right below
// that way we can also perform operations on the rootfs```
This means âyesâ? Sorry but Iâm stranger to using emoji.
Thank you @thorn spire for this explanation.
the explanation is in the source code of checkra1n kpf
Using my instructions?
But it won't work.
This is a good question. But I don't have an answer for you.
@silent anchor Also on your iPhone sometimes appears a blue screen?
Only black screen.
I have same problem.
Is there any script that can solve this problem?
The question is: does only iPhone X (10,6) suffer from the deepsleep bug or also another checkm8 iDevice?
For example iPhone 8 has A11 like iPhone X. But does it have the same problem?
In any case I didn't read here or on GitHub issue page about iPhone 7 or 6S that has this problem.
Futhermore for iPhone X is indipendent from iOS version. But if you have iOS 15-15.3.1 you can use iNoSleep tweak.
@oblique narwhal hello. There is any solution to. The black screen? Or we need to wait?
Can anyome send me a tutorial of how to jailbreak iphone x ios 15.7 no tweeks rootless?
I installed the tweaks inosleep. But still after a minute itâs stuck on a black screen
In my opinion the best thing to do is waiting. Meanwhile, you can check the messages on this server for news. And also you can "read" git history on GitHub repo to understand new progress about issue.
Are you sure you want to continue? You have an iPhone X with iOS 15.6 RC so it is a.s. (almost surely like in statistic) that your iPhone will suffer from the deepsleep bug.
wdym like what can happen ?
Do you have an iPhone X with iOS 15.3.1 or below?
IphoneX with iOS 15.1
IphoneX iOS 15.1
What you wrote is for me?
Well suppose that you set screen lock after 30 seconds (default). So after auto screen lock the device enters in sleep to preserve battery life. And you can't use it unless you reboot it.
oh
and to reboot it
u should
have a pc with u?
Does it work on rootless JB?
dang
That fix is for tweak JB (iOS 15-15.3.1) not for rootless.
And another thing is if you want to write inside NVRAM you must add -n as option of iBoot64Patcher.
No, it is not strictly necessary. But you power on your iDevice without patches so you can't use tweaks, Sileo or Tips.
Repetita iuvant #palera1n message
@oblique narwhal ?hm?
This is a good idea as long as it won't be a dev JB. Because in that case another problems can arise.
alr hope they release itas soon as posssible
@silent anchor In any case with my instructions are you able to open Tips/Pogo and install Sileo? Just for curiosity.
Okay, thank u for your feedback.
@near iris is iPhone X your main iDevice?
In brief. What you send in the pastebin link can help to avoid the deep sleep bug for IphoneX. iOS 15.1?
Well you are lucky you can install [[iNoSleep]].
Ok. I will try more later.
But I didn't try it.
Ok
i think palera1n jailbreak will not work on iphone 8 as process is going without any error, device is not booting automatically so force booting but no pogo in tips app . tips app is opening but no pogo. just confirm iphone 8 is not supported
For me this is another reason to avoid JB for now.
alr i understund u
Okay, but after booting have you experimented the deepsleep bug?
i have tried manually installed using trollstore (pogo) but pogo install getting failed with -1 are you sure u have Amfi patch?
nope .
Interesting.
why is that the reason for not getting pogo inside tips?
other devices are automatically booted but a11 is not booting automatically can u tell solution
DM me.
pretty sure its worked on other iphone 8 devices
Is the rain pale?
What is a pale rain
I get itâs a jail real
Jail ram
Jailbreak
But itâs an awful name
Why do jailbreaks often have 1/0 in place of letters?
Are they just trying to be edgy or something?
Good to know.
well that's not what edgy means lol
It's said that 'Ultrasn0w' was made because the domain they used with the letter "o" was taken so they added that zero, that's when it then became a tradition.
Ahh
What is userspace reboot?
Can I run the tips app and run do all from tools?
Hello please im confused , try palera1n with my ipad mini 4 cellular A1550 and ios 15.6 , first ok but finally is unsupported
I turned off my cell phone, when I went to jailbreak it again it gave this
rebooting without power cycling

you ran out of disk space
clear your storage
should have at least 10GBs
Can you explain me?
Clear iphone and pc?
or only pc
when you power cycle, you turn off the entire device via IO inputs and the battery keeps a memory of it whereas launchctl reboot userspace shuts down all the daemons and recycles the OS into a rebooted state
pc
Just use another fork of ipwndfu-8015 that fixes the sleep bug
pretty easy to see what's wrong
I need to enter the command on the openssh in the phone?
However.. the iBSS has to be uploaded in a raw format (extracted, not im4p/img4)
you can do so via terminal under root privileges (su)
Ok. But with sudo first? Must be sudo launchctl reboot userspace?
userspace reboots don't need root
they work under mobile
it does for me
could be a perm issue on my side
What do you mean with "another"?
its leetspeak
Leet (or "1337"), also known as eleet or leetspeak, is a system of modified spellings used primarily on the Internet. It often uses character replacements in ways that play on the similarity of their glyphs via reflection or other resemblance. Additionally, it modifies certain words based on a system of suffixes and alternate meanings. There ar...

because itâs another
the fork of ipwndfu that you were talking about wasnât the fork that i was using
itâs not on github fyi
I knew
Have this error
Can any help me please
How to use palera1n with A1550 device
Ios 15.6
use ubuntu 22.04
Hi. I rejailbreak with PaleRa1n after enter a command in OpenSSH. In the computer, the last line (stuck in this line) appear the next: waiting for SSHD to start. Anyone know what to do?
make sure u have openssh installed or just run ~/postboot.sh in newterm
With su command? Can you send me the full command?
No such file /var/root / postboot
When will it switch from dev kernel to the hum yeah to the release kernel?
one day...
Soonâ˘ď¸
Works fine on my 8, though has the deep sleep bug
never tbh

Awesome
Where can i move the decrypted ipa so it can be seen in the download folder from the normal file app?
mb nvm wrong place
How to restore rootfs ?
Hey @silent anchor, have a look at this!
To revert the jailbreak on your device, follow the steps below.
unc0ver
Reboot the device then open unc0ver. Tap the gear icon and enable the "Restore RootFS" toggle, then tap "Restore RootFS" at the main screen.
Chimera / Odyssey/ Taurine
Reboot, open Chimera/Odyssey/Taurine, toggle on "Restore RootFS", then tap "Jailbreak".
checkra1n / Odysseyra1n
Open the checkra1n app on your home screen and tap "Restore System". If the icon has disappeared or you get "Restore Error: General", reboot and re-jailbreak.
palera1n
Go to your palera1n folder and type ./palera1n.sh --restorerootfs, then do ./palera1n.sh clean.
If the above methods didn't work, see /tag rootfscli for more options.
Thank you
Another question
After jailbreak apps keep crashing, only system apps working
Is there any fix to that ?
What is AppStore issue
apps installed from the appstore crash on certain versions
as of now no
In 15.3.1, is it better not to use it because the application crashes?
the issue has only consistently appeared on 15.0-15.0.1 so you may be fine
âŚđ¤
Hmm
Ok I read it thanks
How fix iPhone X sleep/wake bug?

iOS 15.6 RC
.
Rootless, i canât sudo
.
Do you have eyes?
Yes
@strong ingot