#tvos-jailbreaks
1 messages · Page 3 of 1
yes, you don't need hdmi
all you need is power and usb
and remote of course
has to be the one that came with it
that's the jailbreak app
unzip it and place it in Applications
Plug in your Apple TV via micro-USB AND plug in the power cable
Open Blackb0x - Right click Blackb0x.app then click Open
newer/modern OSes don't trust it by just double-clicking
did you right-click the app?
cool
you'll see your device in the app
Ah, you're on 8, not 7
which means your jailbreak will be untethered
yeah, the 7.3.1 is the counterpart of ios's versioning
which is 8.4.x tv software
select your device
then click jailbreak
let it happen
that's normal
it's exciting when it works
connect it back to the tv
the pop-up box tells you
did you not read it?
when you reconnect it, it may reboot, just let it do its thing
then you can connect to the apple tv using your phone/computer
wirelessly
If the apple tv is connected to the internet, you can search for the ip address in settings
Settings > Network
iirc
then on your mac, head in to terminal
and keep note of that number
then type in ssh root@ip_number
yeah, that's because this apple tv is over a decade-old
it's soo old, it's got 4 predecessors in front
4th gen, 4K, 4K 2nd and 4K 3rd
there's only one
starts with 192
in most cases
it'll be 192.xxx.x.xx
either-or
terminal
Applications > Utilities
then type in ssh root@ip_number
ssh root@192.whatever.whatever
alpine
first thing.. not that it's really important.. is discord on your imac you're using now?
was just thinking of an easier way to copy-paste commands to and from here to there
cool
your terminal should say something like Apple-TV root# or something along those lines
cool, copy/paste cat /dev/rdisk1 | dd of=dump.raw bs=256 count=$((0x4000))
and I believe your apple tv has scp... you can type in scp and press enter to confirm
what does it say when you type in scp?
you can copy/paste to and from terminal
yes
what's terminal doing?
ah, it's a bit slow
cool
you'll need the ip of your mac
you can find it in System preferences > network
once you have the ip, you can go in terminal on your apple TV and type in
find / -name dump.raw
it'll pop up with a line of code like /private/var/root/dump.raw
keep note of it for now
just want to make sure where the dump is saved
cool
so next, type in: scp /private/var/root/dump.raw Your_Account_Name@your_macs_ip:~/desktop
so if you look in your home folder on your mac, that's Your_Account_Name
for example: BobSmith would be BobSmith@your_macs_ip:~/desktop
or Elvis Presley would be Elvis Presley@your_macs_ip:~/desktop
yes
it would be mymacs
or something like that
does the name have a space?
okay, then that's it
instead of "root" which your apple tv uses because it's not personalized by an account.. you'd have to replace it with the user name that you're logged on to your mac with
if that makes sense
yes
well the "Your_Account_Name" would be the username you're logged in to respectfully and the "xxxxx" shouldn't be there as it's on the apple tv, not the mac
the way you're doing this is: Your Apple TV's File ------> Your Mac under current username
what did you type in?
ok done
would u know the best app for movies on the apple tv
If you're looking to pirate then this server isn't for you
I'm assuming downloaded movies from your computer you apple tv?
Please read the rules
are there any good tvos tweaks ?
Is the AppleTV 4K not A15 Bionic ?💀
the tv 4k 1st gen is A10X
4k 2nd gen is A12
4k 3rd gen is A15
This should work on all three
But it's only useful on the 1st gen
did nito get booted from here?
is it A1427 or A1469
use blackb0x
yes but not many tweaks to use
mainly minor stability tweaks, nothing fancy since there's not a lot to do with it other than watch media
it doesn't
use checkra1n 10.2
you asked why 'does'
what message earlier?
A1469 is model number
A15 is processor type
..? then what are you talking about "checkm8 working with a15"?
so you mistyped
checkm8 was fully patched on a12
checkra1n/m8 still doesn't work
But nonetheless there's fugu15 that can work for a12 on tvOS 15.4.1
(that is, if no-one updates it)
that's nice
are you trying to jailbreak apple tv 4 on 13?
i can help with that
no, because unc0ver only works with 13.4.5
if you're on 13.4.8, you'll need checkra1n 10.2
or 12.4
but i find 10.2 works best
do you have blobs?
unfortunate
you could've updated from 13.4 - 16
15.6 will take a long time
not supported for what?
it is
not yet 😉
the exploit can't be, but everything else can be patched
as am i
obj-c, python, some swift
I'm not very fond of swift though
cool
Just ran the latest Nito update. It changed the settings inside Nito for Software Updates to "Disabled". Use to always be set at Enabled. Anyway else notice this and which is the correct setting now to avoid an update?
just install a profile?
I can confirm "Disabled" is correct. It was always labelled incorrectly before. If I set to "Enabled" now and then attempt to update I get a popup option to install. The "Disabled" default now does not give an update option. Long story short, no settimgs change or profiles need to be installed after updating in Nito
Here is how it looks after updating Nito and is the correct setting.
anyone have a atv 4 on 15.x they'd be willing to sell?
i can help test if need be
test what? im trying to buy one
well, assuming the reason you need to buy one is to test things
i appreciate the offer, just looking to buy one though
i don't have blobs for 15
i have an atv on 14.x, but im pretty sure I can't do anything to get it on 15
i have an atv4k on 14.7 to sell
that wouldn't work when you can't selectively update
dead chat 
I don’t know where to ask it but I got new HomePod mini and it tries to update so it’s kinda lagging and my Atv and iPhone are jailbroken is there are way to update it or delete the update so it will stop lagging?
Hi, someone can help me with blackb0x jailbreak ? Indeed when i try to jailbreak my apple tv 3,2 that "work" but codi never appeared:/
You'll need to ssh in
I had seen something like that but i dont know how exactly do that
Find the ip address of your Apple TV
And how do you do for sideload app like that ?
The app isn't sideloaded
Just copy past on apple tv storage ?
Go to about in settings
Find the IP there
192.168.1.113 or something like that
Then in a terminal or command prompt type ssh -oHostKeyAlgorithms=+ssh-dss root@local.ip.goes.here
the password is alpine
is it hard to do? I wanna install Netflix addon in Kodi. I saw a video from 3 years ago and in the video it shows that the addon needs to download a ChromeOS image of 2GB to play the video?!?? Is that still the case??
Honestly i don’t know didn’t use those addons for years
I think the only way for you to know is kodi reddit or YouTube videos
the subreddit never seems to talk about the netflix addon. Anyway I did found a tutorial article from March, I'll check that out. thx for replying
nope
How about install kodi?
I just picked up this appletv and want to know what modding I can do to it
Is it possible to have a future jailbreak even without a cable?
do you have a mac
I do
you should be able to wirelessly pair it using xcode and then use sideloadly to install kodi then
jb without cable would possible in the future if a 16.x jb comes out for a12+ AND someone bothers to port it to tvos as well
Ok thanks, will that need to be resigned every 7 days?
So it wouldn’t matter if the tvOS is on like 14 or 15?
Should I just update the tvOS to 16?
the 3rd gen apple tv 4k ships on 16.0 in the first place
since it's a15 you should stay on the lowest possible version to have a chance at a jb in the future
I think it’s a 2nd gen?
based on the model number it's 3rd gen
but 2nd and 3rd gen 4k both don't support checkm8
only 1st gen 4k
so only app based jb would work if one comes out
wait no it's 2nd gen
but yea still no checkm8
if it's on 15.4.1 or below, then technically it's already exploitable, all it would take is someone porting an existing jb to tvos, and maybe a new tvos bootstrap
tvos jbs are not really getting active development lately, last one is unc0ver on 13.4.5 and checkra1n (apple tv 4k 1st gen and apple tv hd only) on 14.7
Ah I see. And app based jailbreak would work by sideloadaly and Xcode?
yes
Thank’s i have etablished the ssh connexion with the apple tv. Now how can i transfert nitoTV on it ?
welp I tried it
I was able to login on Netflix however I can't play videos cuz Widevine CDM isn't supported on iPads :/
sideloady isn't compatible with tvOS
just sign the app with iOS App Signer, then use Xcode to install
@prisma zodiac
is there any way to get Widevine CDM on iOS? I need it to play videos in Netflix inside Kodi
@fierce flame this is a tvOS channel
it's the same case for iOS
tvOS is basically iOS
the thing I asked also applies to tvOS so I asked it here
@ionic copper
How does one downgrade from 16 to 15 anyway even with blobs?
@trim wagon
Why you selling the 4k on 14.7?
I don't have any uses for the jailbreak and 4k doesn't seem to perform as well as I thought in the beginning
on... an HD? (assumingely not the 4K since there's no ipsw's)
To downgrade with blobs is a bit tedious, but very possible. You just need to set the nonce with checkm8, then use futurerestore
@ionic copper
I asked because even with a 4HD and blobs how would one downgrade to any version of 15 when there is no current tvOS jailbreak for 15 or 16
One simply does not need a jailbreak for the latest tvOS to downgrade. The SEP for 16 can go as low as 13.4 so if you have blobs, you can certainly downgrade.. however for the new siri remote models, the pairing process will fail since SEP is only compatible on 13.4.5/8 iirc?
You can exploit via checkm8 with signature checks disabled and use that to send in decrypted ibec/ibss images to use irecovery to set the boot nonce, turn off auto-boot and save the environment. This then will keep the nonce saved and place your device in recovery mode so the apnonce doesn't change during the rebooting process
After such, running futurerestore will go down the list of its preliminary checks and since the nonce is set, the TV screen will turn green and the filesystem will begin installing to the device. One thing I've noticed; you may need to erase the device in order to downgrade since there are security changes on 15 and above and it will fail if you try to simply downgrade whilst keeping the data
Stable - sure but apps want 15 or 16
Where do i find it?
The 13.4.8 can you jailbreak it?
checkra1n
i only have windows, can i use a vm?
Dual boot into Linux
I think checkra1n for windows might exist now too?
idk actually, i only see mac
No
Hey so is there anyway to jailbreak a 4K first gen without opening it up?
I managed to pick one up with iOS 14.6
Where there’s unc0ver support
unc0ver only covers up to 13.4.5
you can jailbreak it without soldering using goldeneye and dcsd cable
hiiii , recently got an ATV3 can i jb it or it's dead idea ? ^^''
what's the model number on it?
you can use blackb0x
is the repo back up ? I've heard that it was down
what repo?
the repo for the main stuff from jacktv
it's included
thy i will try
FixDisneyPlus tweak is a simple tweak to bypass app update. Would like to install to tvOS.
where's the link and i'll look at it
🤔
Easily fixed without the tweak
What needs to be done?
i'll make a tweak for it that does this easier
Thanks
so i won one of those arcade machines
and got an apple tv
however even tho i won what apperaed to be the standard model
they sent me the 4k model i assume its co the nromal one doesnt get made anymore
errr, is it ebtter for JB? or should i find the old moedl for jb ;/
what's the model? @formal violet
didn't know you could win an apple tv in an arcade machine..
yeah i did
and then a week later the machine was gone
they probaly thought no one would ever win
funny as but anyway
illcehck now
-it says
tv 4k wifi
and the sticker on bottom says 2022
I need this!!
already done
What’s the repo? Sorry I didn’t know you were a developer
still working out some fine tuning
@prisma zodiac @ornate adder add https://zenzeq.github.io/tv to install the tweak. There may be an issue where nitoTV crashes upon adding repos and if that's the case, just downgrade nitoTV until the issue is resolved.
update: it gets rid of the nag to log in, but there's another nag to play content. This is only on tvOS. Looking further in to this...
If you don't have this issue, then enjoy disney!
damn im gona email them, do only 1080p old models do jb?
4k 1st gen also works, but up to 14.7 only currently (in theory higher versions could be also jailbroken since it's vulnerable to checkm8, but you can't downgrade unlike the hd since no ipsws)
also on 4k 1st gen if you don't want to buy special cables to jb it would have to be 13.4.5 max
Is it simple to downgrade nitoTV?
Yes. Just hold the click on the tweak and select what version
having trouble with blackb0x on my atv2 a1378. im able to launch the application and start the install, but it will always stop at "waiting for apple tv to reboot". not sure how long it is typically supposed to wait but ive left it for a few hours at one point to no avail. its made it past there only twice, and in those cases it just shot me back to the original opening screen where one would normally click install jailbreak. not sure if im doing the jailbreak process incorrectly, but im trying to follow the instructions on the github as close as possible. anything I could try to fix?
You need not use blackb0x for Apple TV 2. Just use seas0nPass
i have tried seas0nPass, it said my device was not supported
It is. Just keep trying. I find the lower the windows and iTunes the better
If you're using mac, try it with Yosemite
I have the same model apple tv and it works
i dont have any mac that is running yosemite, what would be tyhe quickest way to get a device onto yosemite
Just boot it via USB. Then install seas0nPass to it
You can use your current macOS to install Yosemite to an external drive, then just boot from it
alright, thanks
@ionic copper another issue ive encountered when trying seas0nPass, the atv will not enter dfu mode when i hold the buttons for 7 seconds. its connected via usb as instructed
Sometimes the buttons need to be held down really hard. Make sure the battery in the remote isn't dead and just keep the usb cable plugged in
Any way to get any of JoshTV’s tweaks? A new repo or simply a way to export the debs from my ATV to my iPhone files.
I have them
NITO! Get it? Neat-o? Lol 😂
Trying to get my nibblings excited about jailbreaking has to come with incentives, classic games (to them) like quake 2 is one of them.
Issue with that is it's too big to host
If I had access to debs that would be fine, there’s always manual installation.
but it would take 100 years for someone to download and upload via starbucks wifi
I need a way to export my debs 🙃
Who needs an in-device file browser? Still a bit in the works, but readily available.
For those interested in the Spartan .deb
https://github.com/RealKGB/Spartan/releases/download/1.0b1/com.whitetailani.Spartan_1.0.0-beta1.deb
The deb doesn't work properly btw - I fixed making them but haven't yet made a new deb. I want to finish plist editor first
If you build using Xcode, sandbox should be removed as long as you have appsync installed.
seas0npass no longer works, you'll have to use blackb0x
how big? i can host anything if needed
nice
Oh? Around 700 mbs
i can test Spartan on tvOS 15, if it hasn't been done already. Very happy to see people making stuff for the platform
oh thats not bad, you had me thinking it was huge
bc its not implemented or bc it needs a jb?
And media playback
Probably not implemented
It works outside the sandbox with permasigning
the "current features" list on the github seems pretty complete, it has what I would expect a filebrowser to have
One could implement airdrop into it
why not use Breezy for that
jailbreaks might be coming sometime
Can’t change anything in app, it’s not CyberDuck. Otherwise would be able to change to supervise.
SSH > *
Yes. However an in-device option would be nice. Glad its available either way.
I'm in no hurry.. There's always 13.4.8 still signed and 14 works with SEP
14.3 going strong
Although Spartan for Apple TV 4K would be dangerous
The dongles, bells and whistles aren’t worth it
I found two HDs, one 14.6 another 14.7
Gave one to my nibbling, they will follow the way of hacktivism
I can do that on 16 
bc rootfs unsealing? upon further research it might be "fine" to do it, but i would strongly discourage anyone releasing a public tool for it
me too
Not just that but it's not foolproof. There was a bootlooping issue when chmod-ing softwareupdated so you can imagine unaware folks trying to bypass jailbreak detection by deleting important files and rebooting
Not on 4K?
Don't you need the full ramdisk? The 4K only has partial otas
1 way to find out
Better idea: sniff out Apple's cdn for 4K ipsw
if they exist Siguza prolly has them
And plus doing such, you'd need the necessary hardware to connect with which every end user doesn't have such except for a cheap laptop running Windows
is that a good reason to not do something? i mean with that logic checkra1n shouldn't have been released bc it requires having a mac
I mean sure but most users don't care and will probably just buy another one
Hello! I have an apple tv 3rd gen on apple tv software 5.0, how would I jailbreak it? /canijailbreak doesn't show my apts version.
which model?
a1427
you'll need Arduino to jailbreak it
you'll need to use this to pwn it https://github.com/synackuk/checkm8-a5
Ok
would be best to get an apple tv 4
They're very inexpensive and they give you an app store
apple tv software = no app store and you get what you get
tvOS = app store with siri, working tweaks and up-to-date jailbreaks
Ohh
Hey I have the same Apple TV.
I also have an Arduino Nano (and an costum made board with allows me to use jumpers etc.) but no USB Host shield.
Since the Arduino also just seems to be sending commands over USB to the Apple TV, I was wondering if there is an alternative to the jailbreak or if it is somehow possible to run the code on an computer or raspberry pi?
I have the Apple TV 3,1 (A1427, A5 Chip) running Apple-TV 7.9 (8163)
Not afaik. It requires checkm8 to exploit and I believe the jailbreak is untethered but you'll need a usb shield. One could implement this via Raspberry pi but exploitation would be extremely finicky
okay
Could you please help me finding a solution?
I am already looking everywhere but I dont have coding knowledge
I can also down/upgrade my ATV to an different iOS
Or could I do anything by opening the Apple TV?
Like connecting it via jumper cables or something like that?
Also would this shield work?
@gilded meadow truth be told; you'll be spending more money on something that'll just be used as a network hard drive. The expense isn't worth it imho and your best bet is to get an Apple TV HD
Hey well the problem is that I got that one from my parents so I can't just buy a new one :/
But yes, I don't see why that wouldn't work although, I'd look for something precisely as MAX3421E or based off of that
okay, also there is that etasonatv jailbreak, adding the profile works but I can't load trailers
Could you please help me on that?
The trailers won't work because the certificate is probably expired. If you have it I can take a look at it
Well I dont have the certificate itself but when trying to add an certificate with the DNS set as described, it seems to be added.
But I am unable to launch the trailers app.
I am not sure if I can export the certificate from the Apple TV
Yeah.. I think I might have it.. I'll take a look
Okay that would be nice, maybe I could just load that onto the Apple TV
well looks like the DNS is closed too
nvm its open
Hey did you find anything yet?
I'll have to go off soon :/
Bro on which repo can we find snowboard ? joshtv it doesn't seem to work anymore
i'll upload it
Hey did you find it?
I was looking for it online but cant seem to find it
:/
Also is it possible to just use some iOS jailbreak?
Unc0ver does not work tho
sry checkra1n not unc0ver
either-or are designed for tvOS, not Apple TV Software
I think your best bet is checkm8
Okay, well checkm8 seems to do the job but I dont have any knowledge of how to use it
Do I have to code something to use it?
you just exploit it with ipwndfu
then the program automatically loads in ibec/ibss
from there, it grabs code execution and runs etason
Okay
as long as you pwn it, the rest is automated
pwn - own
Is that the arduino thingy?
that's checkm8 thingy run with arduino and usb shield
Okay
So I download ipwndfu and put the apple tv into DFU and then just run it, right?
you run it on ardino
So theres like no way it can just run on my pc and do the job from there?
oh god dammit
Why do I have to have exactly that one apple tv
if this was a possibility; there would be more than just the one guide 😛
Always hits me
Okay I tought maybe its possible to just run checkm8 on the pc and do that stuff from there
But I'll have to get that thingy ig
Well
I'm more curious of what you plan to do with it jailbroken
you're asking a lot
Since its gonna run 24/7 anyway
I tought its just a "open" linux system then? .-.
there's not enough memory to turn it into a pi 😛
you're looking at basically doing the same on an iphone 3g
oh 
this tech is ancient
ok that thing is kinda useless
yea
it's great for hiding gorn and storing photos
xD
lmao
Well I hope I can still do something on that thing
atleast
Well
So those sideload jailbreaks also wont work, right`?
best you probably could do is use it as a smtp server
nah I have my Pi's for that
I just wanted to install Kodi on it .-.
let me put it this way: there was no such thing as 'sideloading' on this device.. that's how old it is
But I guess that won't happen
wait what??
Not even with xcode??
no
What the hell
xcode you'd develop an app and you'd bake it in the OS
okay and what about those methods were you flash an jailbroken iOS onto the apple tv?
you'd get it approved by apple and they'd include it via updates
wow
Okay that think is like a Nokia ;-;
that was literally ios before Steve said "we're expanding our market"
okay
no, that was patched after apple tv 2 had been exposed. Apple tv 3 though doesn't use custom firmware
okay
too bad you couldn't trade it...
Well my parents bought it lol
From ebay
And they were unhappy with it
Since there's no appstore on it
like pitch the idea of a slightly faster model for the older model.. granted though, you'd still need a mac
I do have an Mac VM 
kodi or.. xbmc is so outdated.. you wouldn't find any use for it except bragging rights
vms won't work
for jailbreaking?
no, because checkm8 doesn't work with virtual machines unless you have usb passthrough
Well with VMware Workstation Pro (totally legit bought one) I can tell it to automaticly connect an usb device to the vm
And it also detected the apple tv with the blackb0x
Just didnt work because I didn't do the arduino thing
and that's all fine and cool, but checkm8 has issues with virtual machines, it simply won't work. I've (among millions of others) have tried
you could... make a hackintosh
I used to have an hackintosh installation but I upgraded my GPU and now it wont boot
Still have the install
But it gives some error and stopps booting
I mean I get an screen from the bootloader
oclp might work
oh? and it still doesn't work?
I also have access to the EFI partition
you could just disable the gpu and run it off on-board defaults
I dont have an iGPU tho
oh man.. you're using the infamous tool
:/
well it worked .-.
I dont understand most of that stuff (and forgot most of it)
So I was glad that it worked
So yea
With my old GPU
I also didn't have acceleration
But the graphics still worked
still funny how folks can get a gaming rig but they won't buy an old macbook
The processing was done over the CPU itself
Not an GPU or iGPU
I guess
Atleast I didnt have acceleration
So I think I should be able to run it without acceleration
Well
Maybe you know what that error means?
one sec
acceleration isn't needed. looks like garbage but performance will boost
Ik
I am not sure about what it could be.
I mean it stopped working, or atleast I noticed it not working after I upgraded my GPU but since my old GPU was also not supported I am not sure if thats the reason
I think it might be some other reason
Well I saved that money for my GPU
and the other parts saved over a long term
well, they're not wrong 
clover bootloader
Yeah found something
Okay
oh god
Now I have to get back into that techy stuff
Wich I have no clue abt (no clue abt mac stuff)
Where did you download the clover files from?
I am not sure wich one is the right one
you'd - ironically - need a mac for that
works virtually 😛
it's a setup
it'll format the whole drive and replace
if you care for your old efi, back it up, then go nuts
you can use open core configurator to mount the efi if need be
Well I tought I will just move the EFI files onto the EFI folder on my partition and then do the stuff on there
Since I am on Windows
I dont remember how but I somehow did that with opencore
So I am supposed to like run it on macos and that would replace my Efi files with that bootloader?
you run the installer on mac
it'll walkthrough what you want to do, then it'll unmount the volume, add in the macos installer then it'll replace the EFI
you can either boot legacy or uefi
okay
Well I already do have an MacOS installation
Will it completely reinstall macos?
you don't even need to reinstall mac
if you have an installation, just program the bootloader to your usb stick and boot from that
Okay because I tought just copy the EFI files, place the drivers in there and its good to go .-.
Ok so since I run the installer on a VM
I can just hook another partition up to the VM
And it will save the files onto that partition
Right?
you're going to try booting a vm disk to a hackintosh?
No I mean run the bootloader installer on the VM, it will install the bootloader files on the VM's EFI partition and then copy the files from the VM onto an real EFI drive
Or are you supposed to export the bootloader installer onto a USB drive and then boot that and it replaces the EFI files on the pc?
just install the bootloader to a usb stick via vm
you don't need to run the bootloader on a vm
unless that's what you mean 😛
Ok so how I understand this:
I connect the USB drive to my VM
So it appears as a drive inside the VM
Then run the installer on the VM and it installs the bootloader onto the USB
Wich I can then use to boot my PC
Right?
yes
Ok
So
What I meant was just to add an virtual drive to the VM, make the install on there and then just extract the bootloader files onto my PC's EFI partition
ok well where do I download clover?
There are like 30 fishy sites
i have an apple tv not 4k but still not a thicc model
that's nice
Oh yea sry maybe we should switch to a different channel with that hackintosh stuff
But the installer you are talking about
just gotta see which bootloader is right
Wich one did you use?
well the bootloader comes with the installer
Can I trust sourceforge?
sure, but it may not be the right bootloader
it depends what version of mac you're installing
Yea thats why I am asking you
i belive i have an apple tv 4k 1st gen
I think it was MacOS 12 (Monteyrey)
my remote doesnt have a white outline on the menu button tho
look at the back of the apple tv
what ports do you see?
is it this?
or is it this
thats what i remember because i was screwing around oe day
its the first one i think
i remember micro usb not usb c
can you read the model number on the bottom?
im at school💀
stay in it
xD
its 2:53
ill get out at 4:30
be home at 5
ill DM the model number then
ok
Ok
I'm back
So I have my MacOS VM booted now
Wich Bootloader should I use now?
For MacOS 12
Is it Clover Configurator?
Well I installed that from the beginning
I think it was one wich supported my CPU
I'm not sure why tho
too much security on the newer ones
Okay
i mean, completely up to you, but i think it just leads to more issues
okay
Well yea I would try
Because I dont really want to remove the whole installation
the installation that's not working 😛
tonymac

Should I get the one with emulated NVRAM or not?
don't think you need it
Ok I have the Clover installed now
Well
With the mac driver stuff
Do I have to add the same ones as from OpenCore?
Ok that bootloader already came further than the OpenCore one even tho I didnt add anything yet
is there a compliled tvosbrowser ipa?
There is
nice, can I get it somewhere?
nitotv
here’s hoping checkm8 gets updated for tvos17
One more year of #checkm8!
iPadOS 17
A10 iPad (6th generation)
A10 iPad (7th generation)
A10X 10.5-inch iPad Pro
A10X 12.9-inch iPad Pro (2nd generation)
tvOS 17
A8 Apple TV HD
A10X Apple TV 4K
296
well it already is “updated”, you cant update a bootROM exploit
its just a matter of if people will actually use it
im testing it on tvOS17 rn
@trim wagon
I'm surprised but also delighted that Apple is giving the 4HD another year of life. This has to be the device with the longest support... 9 OS versions (from tvOS 9-17). Now, we just need a working jailbreak
TvOS or any more obscure OS (e.g. AudioOS and BridgeOS) will probably be done in the distant future if they ever have some larger lifespan, which is likely to happen.
Hey i found an old apple tv running tvos 8 anything i can do with it?
@earnest narwhal
There is no tvOS 8. There is Appletv Software 7.9 for the ATV 3 and tvOS 9 for the 4HD
Uh then its 7.9
Its like from 2013
what device model is it?
Uhh how do i check
Either in settings or looking at the bottom of the unit
Sec ill plug it
hoping it's A1469
Hoping i could find the damn box 😭
@ionic copper im in settings
go to about
it should tell you model number
It changed
you can do untether
that'll work. Needs to be on yosemite or higher
Its on the latest beta i think
you'll also need remote, power cord and micro usb
Have these
and also; sanity
inafter you're insane
keeping in mind, jailbreaking the apple tv 3 won't give you a whole lot
Already insane 🧌
if you want more.. get an apple tv 4
What will it give me
Cba i barely use it anyways
2 apps, one useless and another great as an online storage device
Will i have safari or yt
no
Oh fucj
if you want that, the next gen would be recommended
well what are the apps
there are none.
Whats the useless one
nitoTV
What does it do
crashes when you launch it
Oh cool
Well i have time and im bored
How do i do it
think of it as a respringing without respringing
Cool
It will be the highlight of my summer if we can finally move forward from a tvOS 14 jailbreak into a stable tvOS 17.
Wish Apple would step up their game. Adding FaceTime to tvOS just seems like a waste of potential just to slap a big number on the OS with added security imho
Why not expand controller compatibility? or even allow imessages on it? I wouldn't mind using a bluetooth keyboard to respond on the TV when iphone/ipad is charging.. I think another great feature would be to have icloud backups on it too
Just interesting how it's (so far) the only apple device without FMI or activation lock. Not that I'm complaining but it is certainly odd when they have it for things as redundant as headphones
Or for goodness sake.. give us the option to swap out the on-screen keyboard for a swipe-on-trackpad interface..
A FaceTime feature we can connect a Bluetooth camera to would be nice. I mean being able to airdrop YouTube vids and have it picked up by the native app on the ATV would be the most basic of features.
Oh yeah, why haven't they stolen Breezy yet? it's been around for years and we know Apple knows about it.. maybe they are scared of getting sued
I mean; the jailbreak version would always be better but having basic airdropping would be nice without having to break out a computer to enable it unofficially
maybe tvOS 17.4 will have continuity expansion of enabling bluetooth media sharing via mac/ios
Have to wait and see if this comes out and does any of that
https://www.imore.com/apple-reportedly-planning-apple-tv-combined-homepod-facetime-camera
Don’t think I trust a native camera so im glad it’s iPhone camera compatible, but the whole combo sounds like something that should have been designed a decade ago.
On another note, I have 2 jailbroken devices one on 13.4.5 and another on 14.7. The latter runs the latest version of Infuse and the former is stuck at a lower version, which has a bug in it and causes the app to crash when it attempts to fetch metadata. I know that installing newer apps on older OS's can result in the app crashing. But, I would like to try it nonetheless. I just wonder if Firecore (the Infuse app developer) just upped the min. OS requirement to 14 for no other reason. They have done it before. Anyone know how I can copy the app over?
@storm ridge sorry no clue on the infuse issue. But any chance you have the latest retroarch and could test something on the 14.7 atv
Probably not a bug but an invalid link.. Can be fixed inside the .app
Is there something like Veency for the ATV 3? On latest version
This is what I get when I try
@jaunty rune
Retroarch doesn't sound familiar to me. What are you looking to test?
@ionic copper
Infuse fixed a metadata fetching bug in their version of 7.5 which requires tvOS 14. Since my 4k's are on 13.4.5, I can't update to it. Whenever the app is opened, it does a metadata update and crashes after about 30 seconds. I think the database got corrupted. If I turn off meta fetching then it stays alive. If you think it's a invalid link, any idea what file/link I need to change?
You can't install iOS tweaks on apple tv. Apple tv does have VNC though
I'll have to check. What version is it?
@ionic copper
Infuse 7.4.2 is the highest version I can go to on tvOS 13. The fix was implemented in 7.5. If Settings>Metadata Fetching is turned on the app crashes in under a minute. Oddly, when I go to Settings>Library>Refresh Metadata, it does not crash. One is automatic, the other manual... the former which crashes.
@ionic copper
This is from the 7.4.2 app on OS13. I wonder if I were to replace them with what is on OS14. Sounds too easy lol.
UPDATE: Replaced the above metadata nib files... no change. App still crashes. Also was able to get the actual 7.5 app by using AppStore++ and then changed the minimum version OS to 13 but immediately crashes on launch indicating there is actually a missing required framework of some kind. So, currently stuck with no auto metadata updating 😦
I'll take a look sometime today. It's not a framework
Get the nightly if interested
RetroArch is a frontend for emulators, game engines and media players. It enables you to run classic games on a wide range of computers and consoles through its slick graphical interface. Settings are also unified so configuration is done once and for all.
Recently updated with siri remote gyro support for mgba(gameboy advance)
But not working for me
@jaunty rune
I've never used my ATV for gaming, wouldn't know what to do
@ionic copper
Would be awesome if I can get it to open, nice that Appstore allows me to install it
Ah ok. Yah i use it all the time. If you get the time or interest should check it out
Pulled a old tvhd out of the box and it has a jfam profile, any way to get it working it looks like it's running a late version of 13.3
checkra1n
or unc0verTV
@storm ridge I added the metadata update from 7.5 to 7.4.2 and the app launches but don't know how to verify. What steps did you do to hit this bug?
@ionic copper
If Settings>Metadata Fetching is turned ON the app crashes in under a minute. If I turn it off, it doesn't crash.
If this does work, I could upload the fixed version to my repo but the in app purchases would be disabled.. I don't know if you use that feature
I have the lifetime subscription
Yeah I mean.. Restoring purchases may not work so I don't know how that'll pan out on the decrypted app
@ionic copper
I'll still give it a try
Looks like tvOS 15/16/17 are getting jailbroken for HD and 4K 1st gen
Semi tethered of course.. Need a computer on every boot
@ionic copper
This sounds great. Will we need a special breakout cable for the 4k or just a Mac and USB cable?
4K is going to need special cables, HD just need usb to usb-c
Glad to hear. I’ve got three HD atv’s to work on.
if the dcsd is a blocker for people, I recommend checking out the Tamarin cables. They’re DIY but the hardware (which is basically just a raspberry pi pico + lightning extension cable) is pretty cheap and available on Amazon. Ends up at around $10usd per cable. Unfortunately it still requires a GE though
Hmm, been on for a good 5 mins and nothing.. even though there's no sources added.. should I add some? Although I cleared cache and the app still works fine
@ionic copper
If you add the tweak to your repo, I can test it
hold on.. I'm going to try installing 7.4.2 standard to tvos 14
see if it crashes as-is
@ionic copper
Infuse can be updated to the latest version on 14 so it will not crash
indeed.. just trying to test out the metadata refresh but struggling to add a source 😛
barely use this app
@ionic copper
I use a NAS but it's possible to just configure a computer as well
https://support.firecore.com/hc/en-us/articles/215090977
I'll take a look at that. Meanwhile...
@ionic copper
Cool! Palera1n?
checkra1n
How stable is this? I’m hoping to upgrade to 16.5
still a WIP
i got tweak injection working on 16.x last night, and the box didn't kernel panic over night, so progress
but quite a ways out still
@ionic copper
What checkra1n version can do this on atv above 14? I don't see any mention of it on their site.
It's currently work in progress. None yet
assuming its going to be somewhat macos/linux only.
its going to be an interesting battle between the palera1n team and this
or they can work together
not sure how high priority tvos is for the palera1n team though
my apple tv hd is the only thing that could be palera1n-able(?) so im gonna wait this one out.
palera1n uses checkra1n as a base anyway
yeah but i wanna use apps ios 14 and above since i dont have ios 14.7 blobs.
yeah im just saying either one the underlying jailbreak will be similar
I don’t see the need to use palera1n once Checkra1n update is released
didnt know an update was still planned for ios
Wtf is that link about?
DOES ANYONE GOT 2M OR 3M AND MORE IN JAIL BREAK
DOES ANYONE GOT 2M OR 3M AND MORE IN JAIL BREAK
PLS
PLS
This Discord server is for iOS jailbreaking, not Roblox. Please keep your discussions on-topic, thank you!
Not sure what you mean
I'VE GOT 69M AND MORE IN JAIL BREAK
Been inching towards an idea for a tvOS karaoke app. Sing! by Smule was taken down prior to the pandemic and could have reached its peak during quarantine but noooooo idjot corporate had to take it down.
A karaoke app with user to user interface, Spotify integration, and iPhone camera capability on tvOS17 sounds like something that was needed years ago.
yeet
I see you’ve improved this. Nice work!
forever blocked unfortunatley by whitetailani
Reposted to NitoTV server
oh no, i can see them, they just can't see me 
Ah Gotcha
Remember folks: only children block. Adults reason and come up with resolutions to conflicts
https://github.com/RealKGB/Spartan/releases/tag/0.5
i made it better
I clearly remember you telling me to prove your own argument shut the fuck up
I asked you to prove your argument and you said "search it up yourself lol"
which you did every. single. time.
I tried to come to a peaceful resolution with you but you literally would not do anything to help that so maybe take your own advice?
Imagine unblocking just to reiterate that you still haven't learnt from your own mistakes to tell me I'm wrong, then continue being disrespectful in the process and blocking me again like a child.
Ignoring the problem as usual. Did you read nothing I said?
Also this is not my only issue with you
I would find more examples but frankly you aren't worth my time, by consistently going the "holier than thou" route and not making an effort at all, just saying "oh they blocked me. remember only kids block!" you've sealed this.
Impressive you're able to dig up - what I'm seeing is dirt on me? when you can't even search up what you did to others (myself included). I applaud you for the misfortune.
Please reread the last section of this and then fuck off
Am I in a high school hallway?
No, a discord server where zenzeq thinks he's in a debate competition with control over the rules
is the apple tv hd / A1625 jailbreakable
Or you can wait for a checkra1n update for tvOS 16/17
Go to ipsw.me on your Mac and select your device, you’ll see a list of firmwares. Select tvOS 13.4.8 and download it. Then download the Checkra1n software and just follow the instructions. You’ll either need a Mac laptop, a REALLY long usb-c to usb cable, or move your desktop to your TV.
To install the firmware first, you’ll need to open iTunes and use the ipsw file to restore the device into that firmware. You can use google to help you with that.
i dont have a mac
i had a hackintosh for a little bit but it corrupted literally everything on my SSD
i have linux and windows
check if checkra1n has a linux version
Actually there are several Linux versions
checkra1n update no, but tvOS palera1n support yes
not yet but it is being worked on
iirc last time I tested it didn't panic it just hung somewhere
https://github.com/RealKGB/Spartan/releases/tag/0.5.1
it can now do this instead of just listing the folder name
Only in the bundle directory though, tvOS' sandbox system is different from iOS and so existing tools don't work if you provide the container or data container paths
I can update it to work it's just 3 am and I dont have the brainpower
Nice work! Just curious is the search, new file, favorites, and settings supposed to be working yet?
Those need fixes - I moved the main view to using a different variable type to store file info, which is better resource wise but broke some of the very old things. I am currently on vacation but can fix those up in a few days
Ah no worries. Was just making sure it wasnt just me. Have a good vacation and thanks for the hard work
Search has been fixed and pushed, just no built release yet as I'm setting up data container app listing stuff
@jaunty rune what tvOS is your ATV on?
Does palera1n work on tvOS?
Not yet
14.2
Can you check something for me?
If you go to /var/containers/Bundle/Application , /var/mobile/Containers/Data/Application, and /var/mobile/Containers/Shared/AppGroup and pick a random folder, is there a file named .com.apple.mobile_container_manager.metadata.plist in each one?
Yes there is
Perfect thank you
Friends? Sent a dm
No thanks, I'd prefer to keep stuff here if possible
@uneven wraith Yah thats fine was just going to invite you to the nito server
Ah
would it be better to jailbreak an HD with 10.2.2 or 13.4.8. since I only use it for kodi/xmbc
@sharp monolith 13.4.8 is best
I’ve been using 13.4.8, but since I don’t have a macos or Linux, I’ve just been using odysseyn1x, which only works sometimes
and I know the reason is because my computer is amd based
@sharp monolith If anything be a bit patient for the 15-16.5 jailbreak coming up. It should be available by sometime in July.
@ionic copper what happened to your repo, it used to be packed.
It was merely as a backup for nitoTV when nitosoft was down. Since it's back up, it's redundant to keep the same packages online when they already exist; but fear not.. Got more stuff coming soon 😉
oh yeah huh
<key>BuildID</key> <string>16771270-0D7F-11EE-B070-653D78852605</string> <key>ProductBuildVersion</key> <string>21J5293g</string> <key>ProductCopyright</key> <string>1983-2023 Apple Inc.</string> <key>ProductName</key> <string>Apple TVOS</string> <key>ProductVersion</key> <string>17.0</string> <key>ReleaseType</key> <string>Beta</string> <key>SystemImageID</key> <string>58B4BACE-1EAD-4F2E-A2BD-876BD73383F5</string>
Process spawning just got a huge update which also lets me start work on a root helper.
New beta release comes when I fix tvOS 14 issues
And potentially also a root helper now that I can spawn processes as root - just have to make myself a small helper application
Also I completely overlooked symlinking to a file
help can i blackb0x on windows
No
Lol least you noticed
That's fixed now
Process spawning is also fixed (mmm entitlement differences) and now im looking at tvos 14
Too bad the jb isnt updated for 15-16 yet so u wouldnt have to worry as much about 14
Ok im doing some testing on 14
I have no idea what's going on
None of the sheets respond at all
@jaunty rune I have no idea what's going on, nothing is responding on tvOS 14
I have all the various file openers and top bar buttons managed by Sheets and they just do not work
No response at all
Way Beyond me. Maybe someone in other server might know something
@ionic copper
Hi, any news on that Infuse metadata fetching problem? It was fixed with version 7.5 but that requires tvOS 14 and I'm on 13. You said I might be able to just change a link. I'd be willing to try that.
working on it
It has root helper now!! You can now perform filesystem actions (copy, move, delete, create, change fileperms) outside of /var/mobile
tvOS 14 issues still no luck
@normal escarp
I know this is an often asked question, but I have a few ATV 4'k (first gen) that are on 13.4.5. I am slowly losing app functionality (ie. update required). Should I update to 16.5 and wait for the jailbreak?
I'd keep at least one on 13
Ya that's what I'm thinking as well. Do you think a jailbreak will work on all versions of 16 or just up to 16.5?
So far, just 16.5. It's still a WIP
Good news is, you can downgrade to 13.4.8 & 10.2.2..
Bad news is, you have no other blobs in-between
Getting this with Appstore on all my boxes. Anyway to fix? Occurs with any app I try it on.
Probably from the server that appstore++ connects to
are you downgrading it to 5.0-5.2?
@ionic copper
I was able to manually downgrade to 7.1.3 which is a version that does not give stutter on the 1st gen 4k. I have that particular version on my other 4k's making sure I don't upgrade. But on one box previously I upgraded to 7.4 (the last avail version on tvOS 13. Today I went back to 7.1.3 but it crashes immediately upon launch. Strange. Any insight why it's crashing when it works on identical boxes on the same OS?
it probably crashes due to server change. Some apps that connect to the same protocols end up slightly changing the address that could require more authentication that the lower versions don't have and thus, crashes
@ionic copper
I have the same app version (7.1.3) on the same tvOS (13.4.5) on two different 1st gen 4k's. But, the app I downgraded crashes.
Like.. insta-crash?
if it's insta-crashing, try deleting the app entirely, then selectively downgrade it
@ionic copper
yes, instantly. I will delete and try to reinstall 7.1.3 directly.
insta-crashes are either corrupt app or jb detection
@ionic copper
Deleting and re-installing the exact app version manually rather than downgrading worked. Thanks for the suggestion! 👍
It also appears that deleting the app and re-installing has fixed the automatic metadata fetching crashing problem I had too on 7.1.3 which they fixed in 7.5. Without a jailbreak I would have been forced to go to the higher version which introduced an occasional judder problem on the 1st gen 4k's. 7.1.3 is the ideal version on the 4k 1st gen.
James from Infuse posted a comment today to someone else about the stuttering problem. I have been on that thread, the only solution so far is to stay on app version 7.1.3 or lower. Now just need to make sure mine does not update on 16.5 without a jailbreak and no Appstore!
https://community.firecore.com/t/playback-issue-with-1080p-hdr-dv-files-1st-gen-atv4k/36419/105
Less work for me 😝
i'm so sick and tired of the infuse devs. the recent version is unable to play video with .ssa subtitles or something of that sort, it just simply crashes. on 14, 15 whatever. all they keep yapping is "why are you not on the latest version" instead of actually looking into the issue
you could try deleting and reinstalling?
it’s the same behavior on tvos and ipados
@trim wagon
Is there a better alternative? I bought the Infuse lifetime plan and while I have some beefs about the app, I do like it overall. Every app has issues, I guess it just comes down to which has the least qwerks.
there's not, but i expect a different kind of service for a product that I am paying for
i recently found out about outplayer, basically a mpv frontend for ios, hopefully the dev would port it to tvos
I'm sure ethereal does that
can i flesh linux on my apple tv 4 ?
No
does anyone know how i can install kodi and nitro tv on my atv 3
you don't.
Hi i had jailbracked my Apple TV4k 1st gen long time ago with chimera on tvOS 12.4 and i dont have the tools to rejailbreak it anymore (broken computer). Now I want to update to latest tvOS because of Apps but there is no way, i tried software update in settings (it tells me its up to date). I tried "Factory Reset" and then "Reset and update", but the "Reset and Update to latest Version" fails on the downloading image (the download bar does not continue and after a minute it jumps back into the home screen). Probably the jailbreak is still blocking the update?
I have no idea how to flash it through itunes, I could get it into DFU mode but how do I get the Device listened into my Itunes (on Windows)?
Or is there any other way to get latest TV OS?
when restoring via itunes (on windows at least) hold shift and click restore, and select the SIGNED firmware you want
how do i see the Apple tv there? I can only find it on Airplay
it has to not be in dfu mode I think
ok, ill restart. But where is it listed then? because i tried that before without dfu and I also couldnt find it
top left it should be a square that says tv
nope dont get this
Im not sure if i mentioned it, but the apple tv 4k is only connected over the network, this gen does not support USB cable
That's your first issue. Do not factory reset within settings. You must rejailbreak it to restore root fs and get OTA updating working again or it'll fail every time.
The reason why it fails is because it runs through preliminary checks of the filesystem to make sure nothing is changed and/or modified to proceed with the clean installation. Anything out of the ordinary is an automatic red flag and an immediate abort is initiated.
This will not work with the 4K as there's no ipsw's made for the 4K. This is only viable with the 1st - 4th gen (HD) models.
Your only hope of getting it updated is to jailbreak. Mind you, you do need a mac as you need to connect via Xcode to sideload (virtual machines will work!) and then be able to restore root fs. After that, you may run the facotry reset.
none and wrong channel
Oh ok
I want to tho
thx i will try this next weekend
use '/canijailbreka' in #bot-commands
Hi all.
I'm jailbroke - Unc0ver 5.3.0 with nito TV installed.
What's the best next step, I'd like to get Kodi 20 up and running without having to do stuff on my mac ideally - is that possible?
Yes, but kodi 17 is better imho. You can download it from nitoTV
How is Kodi 17 better? I don't even think most dodgy streaming apps work with it??
Because the sources are mostly all working on python 2 instead of 3
can i use Blackb0x on windows since i dont have a mac?
no
not worth jailbreaking the third gen
i just want to jailbreak my apple tv
not possible without mac
does anyone know how I am supposed to use bfdecrypt? when I choose decrypt app nothing happens, the app just launches
you select the app inside System - Tweaks - bfdecrypt.
then you launch the selected app
