#futurerestore-help
1 messages · Page 159 of 1
I think
ok
@icy laurel what jb
screenshot the error
the shortcut might just be more effort than simply setting gen
ok
this was my thought too
ok so how do i this normally?
so im fucked
it wasnt tested for 13
[[dimentio]]
i'll fix that rn
and download dimentio
wait ye
Sus
im dumb
hold up
keep forgetting
Also get newterm
normally
Trolling
it does
It looks quite nice actually
uh idk
i havent really payed any attention to Jailbreak
like a year ago i did
ok dimentio is installed
Go to newterm
open newterm
and type
su
alpine
dimentio 0x3a4acd4b33896287
seems legit
Then get fr gui on the pc
Yes
ok
The password is alpine
Unless you changed it
Is this stuff anything to worry about
Press any key
well
yeah thats why i said if you still wanna use it
how close am i to be done in newterm
At the end
And the numbers
now the 0x?
Right
ok
type out the generator
yeah
then make sure your apnonce matches your blob apnonce
If it does you’re ready to futurerestore
says zsh command not found
lol
dimentio 0x3a4acd4b33896287
did i type it in wrong or something
lol
ohhhh
LMAO
bruh idk how this shit works anymore lol
like i literally got JB to location fake and YT ad block
this is why i made the shortcut
lmaoooo
sudo dimentio [numbers]
do i need to restart?
No
update is live
yup
Jesus Christ bro
no caps
can i close out newterm
a while
did you verify apnonce
make sure the entangled nonce part matches whatevers in the blob
ok
its encoded in asn1 anyway you need to do some stuff to decode it
or upload to a website
@zealous bridge where is the entangled nonce in the blob?
or use the shortcut
its in the apimg4ticket key
you can use a blob checking website to decode it
has 14.5.1 sep changed
no
what about baseband
no
ok
ok
i dont remember finding an apnonce being that difficult
¯_(ツ)_/¯
@zealous bridge link?
it took me 10 minutes on a windows pc...
just run the one you have
takes 10 seconds now
it has 525 actions
tsssaver app can find it right?
ye
can you find an apnonce if youre not jailbroken or nah
i dont remember being able to
you can
for a specific generator?
How to save blobs on jailbroken devices
Prerequisites:
- For unc0ver on iOS 14, update to 6.1.0 or newer and install libkrw from the Bingner repo.
- For Taurine, install libKernRW from the Odyssey repo.
Then install TSS Saver from https://repo.1conan.com/, open it and press Save Blobs.
This will always save blobs for whatever versions are currently signed. If you want to save blobs for an unsigned version you're currently on, see !t onboardblobs.
On unjailbroken devices
For A11 and lower, you can save blobs without a jailbreak on https://tsssaver.1conan.com/v2/ by entering your ECID which you can get from iTunes by clicking the serial number twice.
To save blobs on an unjailbroken A12+ device, follow this guide.
but you cant set nonce if you arent jailbroken
@zealous bridge ok TSS Saver SSH host or local blob?
whered you save them
your blobs
it gives a random generator
what you use to save them?
System info
select shsh.host
what was the result
nothing
you didnt do it right then
you probably clicked out of the alert
yeah
got it
whats it say
can i post this info?
yes
now you can run futurerestore
yes

huh

!t futurerestore
futurerestore allows you to upgrade/downgrade/restore to unsigned iOS versions if you meet certain requirements.
[Tutorial](#futurerestore-help message)
GUI
pc
wait
do u have a linux dualboot?
download zip?
i clicked the title and nothing happen
what os
13.5
Tanbeer
How do i rfs with my pc (checkra1n)
if i save a blob with a different generator than before it still works right
e.g. if i save a blob using the generator and apnonce from getnonce.py, then a jailbreak releases and i start saving using the generator 0x1111111111111111
Uh ok
yes
but make sure
that
you use the correct apnonce
@zealous bridge run that GUI?
for 0x111111
yes
when should i plug my phone into my pc?
@celest basalt getnonce has a non-jb mode too
inb4 ibec

ok
bruh
not boot args, it's a CLI arg in 0.12.3
it just says pls wait for rn
i just use libimobiledevice for that
@icy laurel select the ipsw and blobs, download futurerestore with the built in button and then you can plug it in
it's not that simple
im familiar with it so
it is on windows
dimentio is probably easier
you can use irecovery to get nonce probably
no, you don't understand what you're talking about
you cannot just get the nonce from an unjailbroken device
hes talking abt jb
i didnt say unjailbroken
it's completely useless without knowing the generator
oh
im talking about jailbroken

well if the generator is set then yes you can use irecovery -q or igetnonce
yea
which one
the nothing happens
what OS
windows
ye
thats still in beta, should i link you the stable nonce setter instead
it says gathering required info then the green bar goes full, then the program disappears
open it from your start menu
like this
lol
i thought it was crashing, literally was making a debug version rn
!t fr

idrc i just wanna know
Added by stkc#8018
ok
or erase it
should i stay on JB
but select the "update" button
or go to stock
oh

i want to keep my shits
!t fr

do ig stock
holf up
where
so im gonna restart my phone to go back to stock
ok
well i wanna keep my data
restore rootfs on odyssey i assume?
have to reboot
do i have to run the shortcut again?
you cant run the shortcut from stock
so at that point just future restore?
!t libhooker
just do fr now
If you have just installed libhooker for the first time or are experiencing an issue where tweaks are not working or do not show up in Settings when using Odysseyra1n, install NewTerm 2 from Sileo and run sudo /etc/rc.d/libhooker && sbreload. The default password is alpine. If you still get errors with some tweaks, try sudo ldrestart.
huh
so what am i doing
@icy laurel just run it as jb
run future on JB?
don't even need u0 really, Taurine worked for me too
I OTA updated from 14.3 to 14.3 and a single restore rootfs with Taurine fixed it
that was the first time i saw that
hm
@icy laurel so keep the phone how it is
dont need to reboot
ok
and just run futurerestore
yes
where do i do this? @zinc moon
in the gui
i see
@zinc moon is sbingner still hosting on his test repo
...
then im good?
man idk how that shit works
lol
click start
yes
run fr again
idk
no
its moving along again
frgui auto reruns
good
IBEC ERROR
lol
INB4 IBEC
!t ibec
Fix for error code 3, 8, and 10 aka the iBEC error in futurerestore
- Uninstall all apple drivers via device manager.
- Uninstall all apple products including itunes and apple device support stuff via control panel uninstall a program. MAKE SURE TO CHECK UNINSTALL DRIVER WHEN UNINSTALLING
- Unplug and replug device.
- Check device manager for more apple stuff and uninstall if so with same driver checkbox.
- Disconnect device.
- Install itunes64 exe from apple.com itself, no windows store bullshit. This is the best version: https://support.apple.com/kb/DL1816?locale=en_US (It will be labeled windows 7, 8 but install it on windows 10, it works fine)
- Plug in device in recovery.
- iboot (recovery) driver should show up under usb in device manager. Uninstall it and check the with software box.
- Run futurerestore.
- Unplug and replug your device.
- Run futurerestore again
lmaoooooooooooooo
huh
Trolling
they rly had to add that
@icy laurel do all of this
frn1x eta wen
ok im kinda dumb
all you need is usbmuxd daemon and the gui
yep
actually
its gonna be hard
bc u need blob
and ipsw
and wifi
ever heard of file managers?
so
@zealous bridge where do i find my apple drivers
im in device manager
device manager
last usb one
Universal Serial Bus Devies
yes

unplug it when it tells you to
literally no one in britain is like this
but nothing in properties comes up
right click
uninstall
so
done
now to control panke
@zealous bridge yo
i fucked up
i remember i only clicked uninstall drivers for two of them
doing one should unisntall the others
@celest basalt do you know if signed iOS profiles are automatically just removed when their signature expires? or can they just not be installed anymore
ok
[[systeminfo]]
tf
[[System Info]]
was an update requested
on non-jb its not set
so it resets every reboot
yeah
well i have the generator for this nonce anyway
didn't you already leak ECID
lol
but serial number and udid was there
that will happen if you either set a generator manually or you requested an apnonce in normal mode (for example with igetnonce)
Whyd you blur out the ecid 
oh

Bruh
!jumbo 

yo
Whaddup dawg
@zealous bridge can't init no device found
replug
now what
You really like that emoji dontcha
try again
Im boutta fr
How do i check if i can do -u again
did you do all of the steps
yes
accidentally grouped by color
re-installed itunes?
yes
Why u got cydia and sileo
bc sileo beta kinda broken
hangs on installing packages sometimes
I made sure it ran of course, I pasted you the output of that. But you guys were testing it
just tried installing a profile in which the signature expired last year. Works fine, just shows "Not verified" and signature says "Expired: March...
is it still on your test repo
or did you move it to main
live boot linux
put linux on a USB
it says a later version of itunes is already installed on this computer
and run FutureRestore there
ik
Fix for error code 3, 8, and 10 aka the iBEC error in futurerestore
- Uninstall all apple drivers via device manager.
- Uninstall all apple products including itunes and apple device support stuff via control panel uninstall a program. MAKE SURE TO CHECK UNINSTALL DRIVER WHEN UNINSTALLING
- Unplug and replug device.
- Check device manager for more apple stuff and uninstall if so with same driver checkbox.
- Disconnect device.
- Install itunes64 exe from apple.com itself, no windows store bullshit. This is the best version: https://support.apple.com/kb/DL1816?locale=en_US (It will be labeled windows 7, 8 but install it on windows 10, it works fine)
- Plug in device in recovery.
- iboot (recovery) driver should show up under usb in device manager. Uninstall it and check the with software box.
- Run futurerestore.
- Unplug and replug your device.
- Run futurerestore again
uninstall the older one first
what bruh
uninstall the older one with add or remove programs
what
just use linux lmao
bruh hold up
so im in control panke
and itunes isnt even there
but it says there a newer version i have installed
thats bs
uninstall everything with “apple” in it
it has been
did you reboot when it asked you to
nothing is in control panel
thats probably why
do it again
how do i do this linux way?
Do you have a USB
yes
ok
put every important thing off of it
yup
then
get these two things
uh
download that
then i need to go into bios
@green onyx oh yeah just saying
yes
and boot off the usb?
don’t ever use futurerestore on 21.04 @green onyx
lol why
Yep
i use lts btw
then what
when i was fring yesterday
kernel panic?
ping me when uve done it
ok
At the very beginning
I was in the dark for the whole thing
All i could stare at was the progress bar
yo
download balena onto usb i assume?
run it on your pc
then select the iso as the image file you just downloaded and select your usb
No
why pinged
Oh just go on the GUI
and press exit recovery
you probably have to run the shortcut again tho
yes
lol
Theres no chance anything will go wrong until futurerestore says “sending filesystem” in the log
So you’re good
ok
i was just thinking about that
Yeah
but how would you download your blobs
oh true
Lol
similar to how the shortcut does it
but
also
not everyone uses web-based
the distro needs to be ubuntu based
this
to load the blobs and ipsw onto the usb
ibec is dogshit
ok so
wdym from windows
basically
we make a frn1x zip
and then we have a .exe in there
tell people to select blobs and ipsw
then flash the linux os
along with the blobs and ipsw
this is all done through the program
btw
hm
and then just give them a usb to flash
u literally have to redo rufus (hard ass work)
with everything loaded
that's a lot
^
they should just flash linux at that point and download it with included firefox
also
Can’t we just make another iso then call rufus to flash it
is it possible for a liveboot to detect files on the usb?
is this possible?
u cant
@zealous bridge how long do i have left to do this?
and the fix doesnt always work
yes probably but it needs to be downloaded after the os is booted
no time limit
well
as of now
well im saying liek can i future restore a month from now
or like down the line
^
yeah
after?
damn
if you don’t want to flash a 6gb partition that is
Download 6gb iso who can be asked
hold up
@lilac wren could we not repack the ipsw and blobs to an iso then call rufus to flash it
imma see how we can bundle files into an iso
thats easy
@zealous bridge can i finish this up later?
sure ig
im proably gonna keep attemtpging to figure this out
this Ubantu file is taking forever to install
that's what im saying, it's an extra download to get some frn1x iso maker when they can just do it on the flashes linux themselves
@zealous bridge we need it minimal as possible too lmao
nah I'm not
Fix for error code 3, 8, and 10 aka the iBEC error in futurerestore
- Uninstall all apple drivers via device manager.
- Uninstall all apple products including itunes and apple device support stuff via control panel uninstall a program. MAKE SURE TO CHECK UNINSTALL DRIVER WHEN UNINSTALLING
- Unplug and replug device.
- Check device manager for more apple stuff and uninstall if so with same driver checkbox.
- Disconnect device.
- Install itunes64 exe from apple.com itself, no windows store bullshit. This is the best version: https://support.apple.com/kb/DL1816?locale=en_US (It will be labeled windows 7, 8 but install it on windows 10, it works fine)
- Plug in device in recovery.
- iboot (recovery) driver should show up under usb in device manager. Uninstall it and check the with software box.
- Run futurerestore.
- Unplug and replug your device.
- Run futurerestore again
ok
Fix for error code 3, 8, and 10 aka the iBEC error in futurerestore
1. Uninstall all apple drivers via device manager.
2. Uninstall all apple products including itunes and apple device support stuff via control panel uninstall a program. MAKE SURE TO CHECK UNINSTALL DRIVER WHEN UNINSTALLING
3. Unplug and replug device.
4. Check device manager for more apple stuff and uninstall if so with same driver checkbox.
5. Disconnect device.
6. Install itunes64 exe from apple.com itself, no windows store bullshit. This is the best version: https://support.apple.com/kb/DL1816?locale=en_US (It will be labeled windows 7, 8 but install it on windows 10, it works fine)
7. Plug in device in recovery.
8. iboot (recovery) driver should show up under usb in device manager. Uninstall it and check the with software box.
9. Run futurerestore.
10. Unplug and replug your device.
11. Run futurerestore again
np
true
@lilac wren that thing wasnt working
what thing
who pinged me
Fix for IBEC erorr
whats up
then just boot linux
lmao
thats what im trying to do rn
ok
ubantu file is almsot done
pog
why
so no
@zealous bridge yo
so im gonna attempt to boot into linux now
Did you flash?
ok
ok
@zealous bridge either im stupid
or whatever
but its not letting me select the usb drive
Have you plugged it in
yes
is the title of the file ending with .md
Does it show up in Explorer @icy laurel ?
is it cause i have the iso installed on the usb?
It should be installed on the PC
not the usb
Random question but is there a way to see what iOS you can downgrade to with sep's that work
yes there's a website but it doesn't really tell you much
!t sep
How to check if the latest iOS version's SEP is compatible with a target iOS version: https://joshblah555.github.io/JoshTV/SEPCheckr.html
Though you should ask here to double check
I was just checking because I have shsh for iOS 13.4.1 but it says sep is compatible but baseband is not.
@zinc moon fixed auto dark mode not working
but I also added the manual toggle
Lol
ill send you beta rn
ok nw
My bad didnt know
you can do sep firmware isnt signed
thats a common one when trying to manually specify
just that
i have a poc
pic
^
It happens when you manually specify from the wrong version
🤞
this requires that build numbers are all uppercase with an optional lowercase at the end
@celest basalt can you fact-check something for me
the uppercase part has to be 5-10 characters
what is it
is tim cook real
sounds ok but I would just say activation servers (also change "Current SEPnonce" to "current SEPNonce" or something)
well tbh I still haven't seen a legit request to albert apart from checkUnbrickHealth but that's what Apple documents suggest
and the OTAUpdate logs mention MobileActivation as well
searching for that just leads to iCloud bypass tools
...
Lol
run it again
from recovery mode
if it’s not in recovery mode
then enter manually
none
either just wait or try again
No clue
whats happening
nice
havent dmed me yet
the guy is online with his browser
he isnt logged on using the discord app

lol caught
i mod everything i use
lol
what is it called
Im done fring
berrycord
...
It went smoothly
froggycord
Lol
toadcord

:(
also, the fr emoji looks like a toad too
!t fr

guess that means it dont exist
is 14.5 sep same as 14.5.1
its a user
u just pinged someone randomly
lol u removed it
i ss it
lght
!t fr

Lol was literally about to release -_-
LOL
what are u releasing
what release
oh lol
Fixes
- Fixed dark mode on MacOS failing to be detected on some versions.
- Attempted to fixed regex for iPSW and blob sometimes picking up an incorrect parameter
What's new
- Added a setting to force light or dark theme.
literally I feel like I "fix" regex every single update
i know how to get ibec on mac
"This issue most commonly affects Windows machines"
ubplug phone while ibec is being sent
remove ibec from the ipsw
and rezip
ez
my VM just froze for some reason, after forcing it off and powering it on again -_-
if only it was that easy for iOS
"oops, update went wrong, undoing it" lol
you will see "set nonce to [generator]
bro
i just watched a linus tech tips vid on that
cause i was bored
like 10 minutes ago
no joke
"what happens if you turn your computer off while updating"
lol
lol
what was this
NOOOO
I can't test dark mode
because i havent purchased windows
wait

Lol can someone test for me
sure
sure
also i just realized that to make frn1x, u need it to be ubuntu based but gutted af
first try light and dark mode with system, then open settings and try manual light and dark
alright
i'll make a pr
it is
bro
on my VM of all things
do you have UAC on
what is even UAC
frgui wants me to downgrade lmao
user account control
"do you want this program to make changes to your device"
same shit with me lol
yes I click Yes when it asks, every install

yup
the force light-dark mode also works fine
brb
i just realized
how can we create an ubuntu based distro without a de
and a couple preinstalled packages hm
as well as grab ipsw and blobs
hm
what is a de
the issue is that we need it as minimal as possible
lol do I make a TUI
Ez
how do i shrink this stuff
i want to remove everything and dump frgui only on it
but how tf do they get blobs and ipsw
IPSWs are like 4-5GB, if you’re grabbing the IPSWs the iSOs are gonna have to be at least that size
yes but what about blobs
it still needs to save to a partition
this
bigger partition = bigger iso
this is kinda confusing for me rn
i was just going to say what if they like input url for ipsw at the time of etching or something
unless theres some random workaround that gets around that
we dont need the ipsw in the iso

