#futurerestore-help
1 messages · Page 48 of 1
funny, but fr is it literally only a storage issue?
Or do this, use a flash drive
Just move the ipsw to there
Fr will extract it on that
Or flush out temp
Removes most porn
ive made more room on my c drive it says i have 13gb again
should i run the command again
any other way to fix it ?
ibec error?
thx, i was just uninstall apple drivers, didn't uninstall itunes(
So when adding the -u, you said add it before -t like this? futurerestore-v194.exe -u -t blob.shsh2 --latest-sep --latest-baseband target.ipsw
yes
thanks
Im sure this have been asked a lot, but what are your all solutions for the failure to enter recovery mode? -Thanks
if you're in recovery already then just run the command again with up arrow and enter
if you're not enter it manually
well at least we don't need to manually enter dfu for this
Is dfu and recovery mode different?
very
Can you use futurerestore in dfu, and why would you?
you have to
its called "Device Firmware Update" for a reason
Oh I mean when you put it into dfu skipping recovery
dont think you can do that
since idevices dont accept aptickets in dfu
well
at least i think thats the case
If you're device is bootlooping but you can get it in dfu mode but not recovery
all 3 are the same
wdym
DFU and recovery will almost always be accessible
all uninstall?
yes thats the purpose of DFU
What do you guys think is the best option to use FR: on windows or on hackintosh? Cause I've read on github that windows version has some problems
they're both the same
thank you guys , trying it now

Even though the Lang is Chinese
Like if you're bootlooping, and Apple logo keeps appearing, would recovery be accessible? I thought only dfu would
sry for bad en
How do i manually initiate recovery mode since fr is failing at that point. Just dfu it at that stage?

recovery is almost always accessible unless you manage to delete the recovery partition
iboot
Ah ok ty
dfu is built into to something hardware related dont know what exactly
so it'll always be available
The best way to brick any Apple device: delete iboot
lol
And brick to the point where even dfu wont work
no best way is to delete bootROM
yes
Is it possible using checkm8 exploit tho?
Don't need checkm8
That's not bootrom lol
Like you can access iBoot just from root?
no iboot
Iboot isn't even in the file system
No
If i futurerestored on A12 is my nonce still frozen (?), can I just save blobs the normal way once the generator is set?
It's a separate partition
"If the LLB or iBoot fails to load iOS, or fails to verify iOS, the bootloader jumps to DFU (Device Firmware Update) mode" i think DFU is still accessible if iBoot is deleted
Is uninstalling all itunes related programs necessary for FR to work on Windows 10?
if you get an iBEC error
Noted
Iboot is what allows llb to work
So if you wipe iboot, you've got nothing to dfu with
llb loads iboot doesnt it
or was that older devices
But again, you'd need to like literally stab it to brick
Then you get no calls
no then its bricked
Wanna brick a phone? Mistaken it for a brick when you're making a wall
"If you wipe the iBoot Partiton, It will render the device unbootable. An easy way to do this is flash an Internal UI Build and go to Settings/Internal Settings/CoreOS and press "Brick Device". This will wipe the iBoot Partition. It is not currently known if this is recoverable from."
It's not
Wiping iboot.. You'd need to solder the logic board
Your phone would be on fire
also useful for the CIA
i'm not clear the 8 step, what is means iboot(recovery) driver should show up under usb in device manager. Uninstall it and check the with software box.
hello my iphone x is on ios 14.0.1 and i have the blobs of ios 14.3RC can i upgrade without sep problems?
and you have to uninstall it
yep my device show up in the device manager
yes
perfect thanks
now i should uninstall it again?
yes
You can choose to wipe and restore or doing -u in the command to try and just update/downgrade to the target iOS version
why is my nvram obliterating itself
"unable to send iBEC" any tips?
If you want, you can also use iMazing to back up your phone
I tried using iCloud backup and it tried to force me to install 14.4
I have iMazing, its actually aMazing lol
i have the blobs of 14.3RC but i cant find the RC version on ipsw can i use the normal 14.3 for futurerestore?
Get the RC version from https://ipsw.dev
Download developer beta versions of Apple's iOS, iPadOS and tvOS firmware.
thank you, iam not sure if the blobs i have is for rc or rc2 is there anyway to check?
nvm figured it out
doesn't fix it same error
You might have to run Windows 7, it works better for this overall
You can run it natively, through a virtual machine or through a usb bootable
fuck why is ibec not fixable
idk sad(
Thanks! @zealous bridge I was deleting iboot usb from the wrong part of control panel. Worked like a charm.
weird
I fixed it it by following @zealous bridge 's link -- https://www.reddit.com/r/jailbreak/comments/aqbey5/tip_fix_errors_8_and_10_while_using_futurerestore/ @spiral patio
restoring resets your nonce, however if you set the same generator you had before you will have the same apnonce
thx for your reply and i looked this reddit but it can't work proply
does conan support 14.3RC because when verifying my shsh it says invalid but on shsh.host its valid
and the blobs was saved on shsh.host
On A7+ devices, it generates an ApNonce and recognizes APTickets as well, so even in DFU, it can accept an APTicket.
https://www.theiphonewiki.com/wiki/DFU_Mode
did you use fr on win7?
You have to make sure you go to the actual device manager on window and uninstall the iboot driver. I was stuck on this, doing it wrong for a good 20 min @spiral patio Windows 10
so nonces get reset once in DFU mode? that aint helpful at all
if you bootloop you can't even use futurerestore again
is it possible to go back to 14.3
i'm sure the iboot was uninstall before when i run fr
i have
If you have blobs
is there a tutorial on how to upgrade from 13.5 to 14.3? i have saved blobs and am on a xs max jailbroken with un0ver
Unistall iboot. Plug phone back in. Worked for me.
whatt is blobs
check pins
First pin
any idea :/

if you have to ask that then you can't, only 14.4
If you don’t know what blobs are you won’t be able to, sorry
Is there a FAQ for futurerestore?
ok i will try it again wish me all best (
and troubleshooting steps
k
A69
Just wondering if I can upgrade to 14.3 if I'm jailbroken and never saved blobs or something similiar
rip
To fix unable to "unable to send IBEC" error on Windows 10, uninstall the MS store version and install the iTunes 12.4.3 for Windows 64-bit for older video cards version. You probably will have to delete your itunes library itl file under your user directory\Music\iTunes a well. Then you still have to do the driver uninstall, unplug/replug thing mentioned previously, but your IBEC error will be fixed.
@zealous bridge does conan support 14.3RC because when verifying my shsh it says invalid but on shsh.host its valid
and the blobs was saved on shsh.host, any idea? :/
I may have saved some really old blobs but I guess I specifically need 14.3 blobs right?
if shsh host says its valid youre fine
ok perfect
you would be correct
Aight, thanks
That reminded me that I have the microsoft store version of itunes, maybe that made it work for me?
Hey @spiral patio can you try to get Microsoft’s version of itunes and try to futurerestore again?
imagine even touching the microsoft store
Makes me gag every time
Microsoft store?
definitely do not do this
microsoft version of itunes just messes things up
Gotcha
you must have been extremely lucky if you managed to restore with that
I guess
iBEC (short for iBoot Epoch Change) is a stripped down version of iBoot which is uploaded when performing a restore from Fake DFU in LLB. It was renamed iBootStage2 in iOS 10.
If iBEC is damaged, the device won't get into Restore Mode and will stay in DFU Mode or Recovery Mode.
why is this still needed in newer devices
dears, how to check my blobs nonce?
try it again
if theres nothing under USB devices then yeah you can run again
DFU seems to have a separate nonce
I tried to freeze my nonce and in DFU it's different
but once I go back to recovery I have the old frozen nonce again
maybe its a nonce to go from DFU to Restore Mode
which wouldnt need to be saved since the process is the same for every restore
not sure tho
dears, how to see the nonce of my blobs if I'm saying it correctly, and in the tutorial in the pins it’s didnt say to download the latest ios, do i have to download it?
thanks
and for the latest firmware? do i have to download it and rename it "latest"?
no
only target ipsw
thanks men
weird
might have to run in linux or Win7
only win10 system (
set up a VM
Also need iTunes on win7?
yes
Any other things?
virtualbox extension pack if using virtualbox
I can use win7 pc by my friend’s👀
Think I screwed the pooch fellas. Successful Restore but stuck on Apple logo. Big sad
How exactly do I do that? I certainly will
from command prompt copy paste everything into https://pastebin.com and send the link
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
It turned on actually. Some kind of data recovery screen i have never seen before.
@spiral wolf thats normal
your log looks fine
after the data recovery it'll boot into os properly
@zealous bridge do you even sleep? You‘re supporting 24/7 😃
sleep is overrated
That‘s the attitude 😃
@pseudo wasp you see him supporting 24/7 you should see what I'm doing 24/7
We're having problems, my guys. I've set the ApNonce and the generator, but no matter what the FDR isn't doing it's thing. I am trying to update to 14.3 from 13.6.
7hrs on idevicerestore bro
Ohh, sweet. Well it took an excruciating amount of time to boot to that, admittedly was very concerned. It was probably less than 10 min but felt like hours. Appreciate all the help!
absolute god
what are you working on anyway
I can only imagine! You‘re the mvp 😃
i'm back for a second look at this and still struggling. iPhone11 on 13.5 unc0ver, I have 14.3rc blobs. I didn't set the nonce so I am using what it was when the blob was saved. I have got the generator code from the blob and put it in unc0ver. I get" [Error] argument parsing failed! agrc=11 optind=11" any of you lovely people able to advise where I am going wrong?
v195 will be so 💪
I've used both Dimentio, Odyssey generator, and the TSSSaver generator.
i will try to use fr v194 on win7 later, thanks for your help
try dimentio
can you send a screenshot of your command here
any help?
this isnt a nonce problem
set your nonce
what device are we talking abt
iPhone 11 @zealous bridge
what i do, but the exact same nonce from blobs to uncover app
does your blob have a generator inside it
It does. @zealous bridge
then the blob has the wrong generator
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
it probably is the wrong one
@shy grove how did you set nonce
system info
It's showing 0x(16 1's) @zealous bridge
why is there two spaces
after every thing
and you forgot the ipsw
how you gonna restore without an ipsw
yeah its probably wrong
How do I go about finding it then? @zealous bridge
with A12+ unless you set generator before saving blobs
do i try to use 0x(16 1's), if i get my nonce from system info tweak
you cant
that blob is useless without its proper generator
unless you remember it from the time you saved blobs
if thats whats in your blob
it isn’t
then whats the generator in your blob
i will repot then try again
faceid works
0xf8ac8d7181721cda that
when i type it, click " done" or return? i mean in uncover
press jailbreak
uha then my bad, thanks
where did you get done and return
oh from that box
you press done
then exit settings and press jailbreak
got you will try now
ok so the double space was troubleshooting, the ispw being missing i have no excuse for. New paste, where it says the SEP is not being signed? https://pastebin.com/Py96L7LK
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
Futurerestore iOS 13.5 to iOS 14.2 for iPad Pro 3rd 12.9' - working?
there still isnt an ipsw
and why are you manually specifying
use --latest-sep and --latest-baseband
@forest sinew wasnt this guy in charge of testers or something
You mean futurerestore to iOS 14.2?
yes?
no
No
just doing what i found as a guide, using that has it going now, it's entering recovery mode 👍
Boooooom!!! Got the Ibec error fixed and I’m on 14.3 JB!!!! 🥳🥳🥳🥳🥳🥳🥳🥳🥳🥳🥳🥳🥳🥳🥳
finally
see thats a user error and not futurerestores fault
Do you need a iOS 13 A13?
Damn right
when it comes to me it's always almost always user error
Hi @valid adder in your survey I can't enter iOS 14.3RC
just say 14.3
none
one is stable one is beta
I heard they were both the exact same thing though
So, I have blobs for 14.3 RC? Where would I find the ipsw for that because now I'm getting a buildidentity error.
?*
like no changes were made to 14.3 from 14.3 rc
in terms of software almost
Download developer beta versions of Apple's iOS, iPadOS and tvOS firmware.
so how can one be beta and one be stable, if they're the same
I think it's better just to say one is the release candidate, and the other is the actual release (no changes made)
because 14.3RC was only pushed to developers, while 14.3 was pushed to the public
Successful Windows FR A13 11 Pro Max 13.5 > 14.3rc and jailbroken.
stable will always be better than beta so theres no point anyway
it's not beta though if there's no difference between release and RC
well no, but it's a beta none the less
A stable release is a version that has been tested as thoroughly as possible and is as reliable as we can make it. ... A "beta" release is a version that has been tested internally and is being tested by the wider community.
this still applies here
yeah, but RC isn't a beta, it's literally the exact same thing as the stable
i wonder if you can do FR on corellium
RC is a beta
it seems to be struggling to get it into recovery move. Is it just a matter of keep trying or do I need to do something to help it along?
by definition it's a beta
rc isn't the same as stable
it may seem so.. but Apple does a lot of prep prior to release
theres a developer beta changelog too
does anyone know what these differences are
if you have non-rc/beta blobs.. take advantage of the stable vers
if you really wanna get down to it
the RC was primarily for those whom were on 14.4 and missed the 14.3 window
Yeah I'm on true 14.3
then you're good
Thanks guys, A13,IP 11 Max Pro
yes, the beta releases consist of bug report apps
its present in any beta
yeah so there's a difference
yes but not in the operating system itself
well the app i mean
of course
its not a change to the OS
also, there's been a report of ghost touches on the beta when installing Twitter
😛
ah true true
feedback doesn't really count as a change, but it still is a difference between rc and release nonetheless
yeah overall the stable is just a much smoother experience
much smoother? like someone would actually notice the difference?
also, to jailbreak using an unstable jailbreak on a beta firmware with a non-checkra1n device is as bad as driving a glass car in the mountains
i think heavy/power users might
ive updated to a beta and jailbroken with it (to test) and to my experience, it was complete garbage
is there any concern if i upload logsheet of my restore?
No
Do I run the commands in Windows CMD?
Any way to upgrade to ios 14.2 on xr with saved blobs?
I'm on windows and getting errors
Keeps saying system cant find specific path
14.2 is broken
Drag and drop the files in
alright
No
Alright, so I'm stuck without 14.3 blobs?
Awesome, thanks
!jumbo 
@shy magnet
moment
what would cause failed to load APTicket at blob.shsh2
put your blobs in same folder
or that
terminal and programming is very literal, if its not exact it won't know what to do
@proven mason name doesn't matter
the command you ran tells fr what blob path
i'm just gunna say: if you need to go out of your way to rename files instead of just dragging them as-is into cmd/Terminal.. then you shouldn't be be doing FR
Ive done it before, I just dont know why its not working this time around
Anyone know why my icons look like this? Only installed snowboard no extra icon packs
Wrong channel
I know but I figured I could get a quick response here. You guys are awesome
Is it impossible to futurerestore to 14.2 on A13?
Anyone successfully downgrade 14.4 to 14.2 on iPhoneX?
14.2 is broken rn
looks like I've got success, it's finished restoring and now restoring from icloud backup, I can only assume it's 14.3. Thanks for all the help and developing this awesome tool.
Fix soon
Ah, so it is getting fixed? Great
Try update it
gm
Is that for all futurerestore including downgrade
Incl downgrade yes
i keep getting this when trying to go to 14.3 from 13.5 on iphone xsmax any help?[IMG4TOOL] checking hash for "eUICC,Main" IGN (hash not found in im4m, but ignoring since not explicitly enforced through "Trusted"="YES" tag)
[IMG4TOOL] checking hash for "ftap" IGN (no digest in BuildManifest)
[IMG4TOOL] checking hash for "ftsp" IGN (no digest in BuildManifest)
[IMG4TOOL] checking hash for "iBEC" OK (found "ibec" with matching hash)
[IMG4TOOL] checking hash for "iBSS" OK (found "ibss" with matching hash)
[IMG4TOOL] checking hash for "iBoot" OK (found "ibot" with matching hash)
[IMG4TOOL] checking hash for "rfta" IGN (no digest in BuildManifest)
[IMG4TOOL] checking hash for "rfts" IGN (no digest in BuildManifest)
Verified APTicket to be valid for this restore
[TSSR] Checking BuildIdentity 0
[TSSR] Checking BuildIdentity 1
[TSSR] Checking BuildIdentity 2
[TSSR] Selected BuildIdentity for request
Variant: Customer Erase Install (IPSW)
This restore will erase your device data.
Extracting filesystem from iPSW
Extracting iBEC.d331p.RELEASE.im4p...
Personalizing IMG4 component iBEC...
Sending iBEC (1193922 bytes)...
ERROR: Unable to send iBEC component: Unable to find device
ERROR: Unable to send iBEC to device.
Cleaning up...
[exception]:
what=ERROR: Unable to send iBEC
code=64684049
line=987
file=futurerestore.cpp
commit count=194:
commit sha =0ab9df3209ee599f581532d05d331e6abe0f53f3:
Done: restoring failed!
why not follow the windows 10 notes?
@prisma tide
@prisma tide
let me try that thanks
Thanks man. Not to be an ETA guy but is there an ETA 😬😳
Hello, I've looked all over for this but wasn't able to find any answers. Does anyone know if theres a way to future restore, re-restore A14 iOS 14.3?
If succession is updated use that
You can just do Settings > General > Reset > Erase All Content and Settings
You know, I have tried using it, keeps crashing on me :/ I even placed the ipsw into the file that it's asking for. Maybe I'll give it another go.
@zealous bridge does the "Erase all content and settings" work the same as an actual restore? Thank you.
Not really but for most use cases it should fix any problems
I'm trying to clear all caches and all evidence for work related reasons.
haha
fbi 
@zealous bridge haha for real, maybe I can do the root file restore in unc0ver and then the erase all contents and setting?
You can do that
Now i got failed with error code 2
Unplug and plug again
ook
If not then reinstall itunes
i am not getting a green screen when doing this proccess
@prisma tide ignore
also apple recovery usb is not at device manager so i can not repeat steps 4-6
should i just repeat restore process? this is what i got
This restore will erase your device data.
Using cached filesystem from 'C:\Users\Ponch.ALSPC\Desktop\restore\Target.ipsw/038-83051-078.dmg'
Extracting iBEC.d331p.RELEASE.im4p...
Personalizing IMG4 component iBEC...
Sending iBEC (1193922 bytes)...
waiting for device to reconnect... Cleaning up...
[exception]:
what=failed to reconnect to device in recovery (iBEC) mode
code=65863697
line=1005
file=futurerestore.cpp
commit count=194:
commit sha =0ab9df3209ee599f581532d05d331e6abe0f53f3:
Done: restoring failed!
i just have a black screen
Try reinstalling itunes
do i leave iphone plugged in while i do that? also is itunes supposed to be open while doing this process? i got a promt on itunes and closed it would that affect anything?
You should leave it plugged it and replug it after
Its good you ignored the prompt
Apologies for a dumb question but is futurerestore not on macOS?
It is
will unplugging it while its on black screen boot loop?
The github I keep seeing referenced only appears to have a windows link
Appreciate it thanks
only unplug it after restore succeeded or failed
Futurerestore iOS 13.5 to 14.3RC iPhone 11, working?
Greatest!!
Keep getting -2 error
Futurerestore iOS 13.7 to 14.3RC iPhone XS Max, working?
Yes
just put all ur shit into 1 folder
and cd into that folder
and run ./futurerestore.exe -t blob.shsh2 -s sep.im4p -m BuildManifest.plist -b baseband.bbfw -p BuildManifest.plist -d target.ipsw
ur using cd like every seperate time
and why tf is ur command at .ips
not .ipsw
u didnt even specify bb and sep
the screenshot is cut off
its a folder in onedrive.. its on my desktop idk why it says that
Dont manually specify
Don't use onedrive
do, windows cannot use latest
Use latest
Im not. I dragged and dropped from desktop
It can
it cannot, @vocal sundial did u fix it?
exactly, dont do that
maybe keep up with latest news
tf where
Should have
Despite it being fixed, I'd specify for good practice
They were on a roll lately
huh alright
I was following the guide in the pinned messages
this
Cryptic said specifying was likely to cause more errors now
Hi. Just wanted to ask and information. So I have a iPhone X and right now you can’t go from 13.5 to 14.2 with futurerestore because 14.2 is broken but they are fixing this problem. Right?
uh, u have 50/50 chance
—latest is usually better when it works
Dunno how that's the case unless ppl use the wrong files
dont its broken
I'm curious too
You’ve seen the ppl in this chat have you?
and hes A11
something about new implementation techniques idk
so ios 14.4 is fine
please read github
i trust the devs more
Oh right. Actually I also saw some people on Twitter saying that they have succeeded
I trust the TV
hit and miss or not, its broken
broken for some
(Not working correctly)
Why wouldnt you just wait for a fix then
Btw is there any fix in program?
true
Honestly here's the gist:
You don't need to update.
FR is still janky
Until it gets fixed, wait
14.5 is compatible too
I’m just waiting rn
i’m just saying, prevention is better than cure
Yup you’re right man
Covid talk
Thanks for your help guys
Nope I actually got taught that in 2015
You got taught that prevention is better than cure in 2015?
thats true for drugs ig
Private education teaches you some things public education wont
huh
😉
iPhone 11 sep and baseband?
Makes zero sense.. But ok
use latest
I'm on windows
only with v194
Why couldn't they make mac work on Windows like they do windows in mac
Saved my ass a couple of times
compilation probably
stop asking please lol
Eta ban
lmao true
yes latest works in latest windows build
Can older devices like iPhone 8 can be updated without blobs?
Wouldn’t mind seeing an entire futurerestore redesign
true
very true
having a gui
and selecting where ur ipsw and blobs are
and then clicking futurerestore
There is a gui
Checking if SEP is in a state to be restored
lmao what
iRestore
But its outdated
where
LMAO WHAT
send
pls
i want to see
Google it
it should be possible to load MobileDevice.dll / MobileDevice.framework into a new process and using the official restore code instead of idevicerestore
qwerty's
Indeed
Replace the exe in %AppData%/iRestore/iRestore/1.0.0.0
You need blobs to update unless you’re going for 14.4
C:\Users\Ponch.ALSPC>C:\Users\Ponch.ALSPC\Desktop\restore\futurerestore-v194.exe -t C:\Users\Ponch.ALSPC\Desktop\restore\blob.shsh2.shsh2 --latest-sep --latest-baseband C:\Users\Ponch.ALSPC\Desktop\restore\Target.ipsw.ipsw
@zealous bridge what does it look like
am i doing this right?
You can use -u to save your data
like that
oh shit
Actually it’s updated now
Looks similar but more options
Like exit recovery, update, no baseband
It launches futurerestore in a seperate terminal window
its a subprocess prob
I should update it
It literally one line i think
in master/futurerestore
theres a link to southwes futurerestore
just replace that
right here
I'd redo the ui
@zealous bridge do u know how to compile it?
Make it look like iTunes
trueeeeeeeeee
no
I'd make it look like checkra1n
lol
Just options/start
both are sex
add like the option to check if any problems have been reported
like a killswitch
Nah
so that if it breaks no-one else bootloops
Too much work
mhm
Fix the issue
yeah
@vivid nova just update the futurerestore bundled
But yeah
In theory it should work with A13 and everything
Even just now
replacing the exe
all it does is autofill commands
I'd get into crap from qwerty.. But a checkra1n with fr.. Sex
Guys, I wanna futurerestore my iPhone 11 pro from 13.5 to 14.3. I saved blobs with blobsaver and I checked manually specify apnonce and then read from device. Now when I open the blob and I search for "generator" it can't find anything. Can I use the blob to futurerestore?
Don't bother
Just wait
true. Same ui but gets it into recovery first instead of dfu. And then runs futurerestore
Why?
upload to https://verify.shsh.host
and screenshot it to us
Honestly here's the gist:
You don't need to update.
FR is still janky
Until it gets fixed, wait
14.5 is compatible too
hide ecid
true
so dont bother
unless hes doing smthn wrong
you can try 0x1111....
is it safe to upgrade to 14.2 on my a13 iphone 11?
but honestly
Told you
when will it be safe to upgrade?
No eta
Remembering the generator is one of those things that Apple added in.. Like doing that extra step to kill apps in the background
could my phone brick if futurerestore fails?
Just bootloop
you can bootloop
okay thx
Ppl need to get the common misconception of "brick" from bootlooping out of their minds
It says file is valid but you guys say I can't use it because I didn't remember the generator? I read it from device when it was jailbroken with unc0ver at 0x111 or doesnt that matter?
if you were jailbroken when you saved blobs
I was, yes
Stuck on Could not download Savage,B2-Dev-PatchV several try:(
specify
You’re screwed
try again
this time
dont disconnect from wifi
also are you using a vpn
or like any usb ethernet devices
is there a futurestore tutorial
An Ethernet cable would like to have a word with you
after command prompts are done is phone supposed to go to a second progress bar afterward?
check pinned
first pin
ye
@prisma tide screenshot log?
ethernet cable wouldnt cause errors like these
Yes
Totally normal
does that mean that it upgraded succesfully?
Using WiFi for fr is as risky as licking a toilet seat
or just specify lmao
with the way futurerestore works now
nice! i was able to go to 14.3 after reinstalling itunes from apple website
Dont specify
thanks everyone
which?
It might seem like it, but in reality the odds are low asf
i'm on windows
are u using fr v194?
Can we please fix the grammar in FR @valid adder "SEP firmware doesn't signed"
new futurerestore fixes it
i'm using opa334's
where can I find the pinned post?
which repo?
You are using a very outdated version of futurerestore
im trying to downgrade an iphone 11 14.4 to 14.3, how do i do that / is it possible?
no
releases section
not even with futurerestore
@vivid nova check my branch noob
Die
u need blobs
i'm trying to restore a wifi only ipad, should i use --no-baseband instead?
yes
now here’s someone who can read a guide properly
true
what was the fix for Unable to send iBEC
i just got Unable to send iBEC
read notes ikr
lmao
cmon
bold them
@cloud island @proven mason
and make them cap
Im reading it
rename futurerestore to “READ THE NOTES”
Tanbeer, one more question, what if I try the 0x1111 one and it doesn't work with the blobs. Does that mean I have to upgrade to 14.4?
just dont update
Nope
Futurerestore will error out early on
before any changes are written
14.5b3
inb4 futurerestore support before checkra1n support
someone needs to check the sep
@green onyx check it out
Yeah ik
This process doesn't work with the MS Store version of iTunes. Need to install the "iTunes 12.4.3 for Windows (64-bit - for older video cards)" version and delete your itunes library itl file in order to start itunes as the store version is newer. Then this process works.
We know this
ye no shit, anything from the ms store is shit
what are blobs?

fuq is a blob
wait blobsfordummies
who is blobs
But the notes on github don't have this information. Also plain itunes download wouldn't install for me, I had to use the "older video cards" install.
good analogy
-
why would anyone ever touch the microsoft store first of all
-
Older video cards problem is not their fault, its yours
poggers
fill out form in pins por favor
Sure thing
is it normal for it to say attempting data recovery afterwards?
on the phone itself
Most users don't know the MS store is for shit, they just look for itunes and apple's website sends them to it. Thanks, I figured out why it was refusing to install the regular itunes.
How do I fix this?
does fs support 14.2 blobs on a13?
It seems cant delete any app after jailbreaking
you used wrong SEP, needs to be 14.4
just use --latest-sep, should work on 194 I think
use latest
alright ill let you know if it works
Wow someone actually used the latest version of futurerestore
So I guess its normal for the phone to take a while to startup
Patience is rewarded
How do I fix this?
holy fuck, did u read
sorry i just saw it after sending that
could they not just echo back “Read the notes” along with a link or smtng in futurerestore itself along the iBEC error
or someone just fix it 😃
Well how would normal iTunes restores work then
Futurerestore is just a hacked up version of idevicerestore which is a barebones itunes
Best guide for 14.2 a13 futurerestore?
Don’t futurerestore to 14.2
its a bit broken atm, wait for a fix
For 14.2?
Damn I just waited for an a13 fix now I gotta wait for a 14.2 fix 🙁
Ig I’ll j have to wait a little more for iOS 14
a13 14.2 was working yesterday morning
you should follow the server
to see when it works and the best time to restore
it’ll be here in this channel most likely in the pins
generator wont
but dont restore rootfs
Apnonce can change thru reboots sometimes
So check back in a few days or what?
Ah okay
yeah just check pins every now and then
Hi all. I saved every blob for iOS 14.0 to 14.4 with the same pair of generator and Apnonce, but for every restore I try i get[exception]:
what=Device ApNonce does not match APTicket nonce
With your XS?
Set generator on your device first
Is that the blobs generator?
My XS Max is jailbroken of course
yes
I doubt the Apnonce does not correspond to the generator
I saved the new Apnonce I have now with TSSaver and read it with igetnonce
And they match?
It is really different from the one saved in the blob
Then
Thats not the generator
Your blobs are useless
if you set the generator and the apnonce dont match the blobs
does windows work with latest-sep and baseband now
v194 does
I wonder how could that happen, since I never mofified the generator
try setting the generator with [[dimentio]] then try igetnonxe again
Ok I'll try
Got the same Apnonce I had before with generator set by unc0ver
dimentio output, igetnonce should give the same
I guess my blobs are really useless
confirm
There's no way to establish a generator starting from Apnonce?
Nope
Awating jb for iOS 14.4
have you tried a few different generators? like odyssey default 0xbd34a880be0b53f3
yea I tried, but no luck
have you checked both https://shsh.host and https://tsssaver.1conan.com/v2/ for blobs? maybe they saved correctly in one but not the other
An online easy to use APTicket / SHSH2 blob saver and checker. SHSH2 blobs are used in unsigned iOS upgrades and downgrades. App available on https://repo.1conan.com
I saw another strange generator printed by TSSaver immediately after the installation
maybe I have a screenshot
did you click "set to 0x1111" before saving
I've always thought unc0ver did the job
No, if it shows a random generator it didn't work in unc0ver
@heady frigate did u take ur blobs with systeminfo?
I helped someone else who had this issue, unc0ver didn't set it for them, we checked with dimentio after they jailbroke
unc0ver does set it
always ensure your generator is 0x1111 before reading your ap nonce
idk for some reason it didn't for him. he jailbroke, ran dimentio and generator was something random
^^^ this
hm
it should work as long as you enter the field
I made a test a few minutes ago, all ok now, but months ago I think not
No, I discovered it later
Someone needs to crack the hashing algorithm of this lmao
unc0ver 6 nonce setter is weird