#futurerestore-help
1 messages · Page 38 of 1
In 6 hrs according Cryptic
No
Dear all,
I’m stuck.
Situation: iPad 5 (A9) jailbroken on iPadOS 13 with checkra1n with blobs saved for 14.0
Goal: futurerestore to iPadOS 14.0 so I can jailbreak again with unc0ver or checkra1n, which as far as I know should be possible.
Problem: I cannot set nonce. I tried nonceenabler but it errors with killed: 9. I tried generatorautosetter, seems to work, but when I run nvram -p is simply doesn’t have the boot-nonce setting. When I try to set it manually it also doesn’t work.
Any tips?
Wow really good explanation
I am on 13.5 on my 11 Pro Max and have blobs for 14.3, should I futurerestore and JB or hold out for bugfixes? Is it stable? This is my first Apple device
if i were to jailbreak, could i save blobs for 14.4?
stayyyyy
I don’t think so, my wifi is good enough for everything else on my computer
I can access gs.apple.com through the browser, so I’ll try running command prompt as administrator
save blobs for 14.4, because at some point a jailbreak could be release for that version
do i need jailbreak?
I would sit on 14.1 bc I think (?) unc0ver supports that version rn
Specific reason? New and shiny iOS looks cool and I'm an ape
new and shiny = more security and apple hurdles
so you could jb right now
oh yh im staying just cos in future 14.4 will eventually get jailbreak
so im just trynna save the blobs for that
Will the apnonce generated on one iOS version be the same as the next as long as generator is the same?
not guaranteed but yes def save blobs for 14.4
would i need jailbreak?
when you restore, the nonce changes
if it was the same.. everyone would be able to use the same blob
you don't need to jb to save blobs.. but you do to downgrade
how would i do this? i have never tried saving them
before I future restore from 13.5 to 14.3 should i restore rootfs?
Hey I have a problem. Im on 13.5 Iphone xr and im about to futurerestore to 14.3
I dont know what i should change the generator to on my iphone because i can't find the generator in my blob file. I used blobsaver
then you dont have to change it
I’m trying to upgrade to 14.2 on A10, how do I find/set my nonces? I have my blob open right now I’m just not sure what/how to set
ah nice thanks
Is iOS 14.3 and iOS 14.3rc the same?
Pretty much
RC is the beta but they are basically the same
depends what device
Device
iPhone XR, 13.6.1, Previously used Ody3ssy Jailbreak.
I attempted to futurerestore from 13.6.1 to 14.3 RC & futurerestore exited during the restore process. Attempted to restore with iTunes ending in failure. When phone is force restarted it goes straight to Recovery Mode. Erasing all data & updating to 14.4 does not work either.
I'm currently on a recovery loop. Is there any way to somehow get to any version of IOS?
Virtually tried everything that I currently know.
Reiboot, --exit-recovery, force restarting with the buttons, itunes.
I've got no way of getting back to the normal IOS state.
thx for the copy/paste spam @fading python
?
Dfu restore to 14.4
i have an iphone 11 and windows
Probably the only way
Where do I download the rc ipsw
Xr.. rip jailbreak
you can try tss1conan
How do I DFU with Iphone XR?
Ok so I think I just need to be 100% sure what generator was used back on iOS 12.4 when I saved my A12 blobs for the first time using voucher_nonce so I think that’s 0xcafebabefeedface
how would i use that?
Was this just a glitch that screwed you or did you mess something up?
any tutorial anywhere?
Connect to iTunes or Finder, Volume up, volume down, and then hold power button for about 10 sec until screen goes black. Do this from recovery mode.
Check the pins
Youll see itunes tells you that theres a problem and it needs to be restored, press restore not update
FutureRestore closed & froze during the process of going from 13.6.1 to 14.3 RC
go on the website
ipsw.dev
To save blobs: https://tsssaver.1conan.com/v2/
To verify blobs: https://verify.shsh.host
An online easy to use APTicket / SHSH2 blob saver and checker. SHSH2 blobs are used in unsigned iOS upgrades and downgrades. App available on https://repo.1conan.com
where do I get baseband, and do I even need it?
To download beta iOS versions: https://ipsw.dev make sure its RC 1 (65) **not RC 2 ** (66)
Download developer beta versions of Apple's iOS, iPadOS and tvOS firmware.
fetch your ecid on itunes
type in the number to tss1
I can add to this that dimentio is also not working (just like generatorautosetter). Anyone that can help?
it just worked for me. Did you do it in terminal and go to su?
then what should i do
apnonce and generator are blank rn
To find the proper baseband/Sep files for your device, go to https://www.theiphonewiki.com/wiki/Firmware_Keys/14.x and look for your device model (eg: iPhone X Global = iPhone10,6) and click the firmware number pertaining to the version you wish to restore to. Look for baseband number and compare it to the IPSW file you downloaded. With SEP files, the name is inside the listing as well.
Baseband:
ICE - GSM
Mav - Global
If there is no generator in the blob, then you don't need to set it
Yes. The terminal output is attached. I also tried it over SSH.
But why doesn’t it show up with the nvram -p?
I'm doing that but it keeps putting me in Recovery Mode
You don’t have to login as su
To type dimentio
If you're using a mac, you may use --latest-sep --latest-baseband arguments. The full command would be: /path/to/futurerestore -t blob.shsh2 --latest-sep --latest-baseband target.ipsw
For windows, you'll need to specify blob/baseband files. Use -p/-m/-b/-s arguments. The full command would be: /path/to/futurerestore -t blob.shsh2 -p buildmanifest.plist -m buildmanifest.plist -s sep.im4p -b baseband.bbfw target.ipsw
So am i supposted to type in the build in the apnonce?
I tried both, and indeed the result is the same
But both it doesn’t show up in nvram -p
What is problem
Quick q, I download the baseband of the iOS I'm going to, not the one I'm on, correct?
In the tutorials I read it says that you should confirm that the generator is correctly set by typing nvram -p, and that it should show in the list of options. It doesn’t for me.
just use dimentio
it'll set without needing to confirm
Okay, thanks! I’ll try to continue with the futurerestore process 👍
You can check if it’s done inside system info -> boot-nonce
on the website, it says what my baseband is, but when I download firmware, it is another ipsw file
A11 and A12 can restore to 14.2 as well @vivid nova
yes we all know
i'll fix that.. updated
Oh wait wait
cryptic said in 6 h
futurerestore should support the following restores:
To 14.2 and 14.3 on A11 and A12 (Broken!!)
To 14.0 and above on A10 and below
A13 is not supported for now
is baseband just the ipsw?
Joshhh blobsaver’s dev replied me
i have blobs and im waiting for futurerestore to support A13 chipsets
wait what is the chip in iphone 12 pro chip?
so i can update
yes
oh I'm dumb
A14
ooof
Check the pins for further updates on saving blobs/using futurerestore/guides and what files to use
lel gonna be a while
true true
😦
cause ass
cuz why not
fuck apple
Is there a way to update to iOS 14.3 from 13.5 even though it's unsigned
I'm jaikbroken on 13.5
not without blobs
do you have blobs ?
oof
I shall cry now
then there’s not
It's okay
Just got this error: Device ApNonce does not match APTicket nonce
yessir
is the "set bgcolor to green" thing still valid btw
I'll be stuck on a 13 jailbreak forever
set your nonce on the device
I'm so mad bro
@remote marten Nonce gesetzt?
doesnt seem to be
why? 13 is king
I could've finally updated to iOS 14 and jaikbroken but now I cant
nah but 13 is rly good
It's always nice having a new iOS version
what are yall doing to get messages and photos back?
icloud no?
I was told to not change the nonce because i used blobsaver
iCloud backup
Sigh so i didnt realize futurerestore wasnt updated for a13 yet =\
its in the pin
tried to fr my iphone 11 from 13.5 to 14.3, ended up failing
You need to set the generator on device. Didn’t you specify the none while saving blobs?
yeah stupidly did this last night
you didnt bootloop right
now stuck in recovery mood
So, my device is stuck in RecoveryMode.
I used --exit-recovery and it booted right back into recovery mode.
Any suggestions?
mode
Yes
"irecovery -n"
To both of you
try run that
What @zealous bridge said
booted right back in lol
ooof
im getting -256 but im on a11?
need to dfu restore
restore to 14.4?
from FDR?

for iPad8,1, board config is j317ap
Do I use sep-firmwarej317.RELEASE or sep-firmwarej317x.RELEASE? (second has an x)
Do I drag the Futurerestore file & then type in irecovery -n?
just type irecovery -n
this wont work on windows or macos static i dont think
should i restore rootfs before future restoring?
irecovery and futurerestore are two different things
RIP time to go get a new Iphone lol.
futurerestore --exit-recovery is the irestore implementation of -n
don't need to
getting "unable to recieve message from fdr -2"
on both 191 and the 189
after sending nor data
on a11
the FDR errors are backkk
:/
two in a row now
what can i do if my phone just boots into restore mode?
futurerestore --exit-recovery
im on windows
drag the futurerestore exe to cmd then type "--exit-recovery"
I'm getting all the necessary files and stuff but imma just wait a little while as it seems there are some issues that need to be fixed
Hi guys, do you think I can futurerestore my XR (A12) from 13.5 with this blobs ?
It worked thank you!
looks fine
Isnt there going to be sep issues if i wait too long to restore
To set nonce: add the repo https://repo.1conan.com to install Dimentio. Next, search for the "generator" code found inside your .shsh2 and take note of it. SSH in or use NewTerm and log in via root (su then alpine for password) type in the following command dimentio <generator code here>Upon pressing enter, your generator will be set.
If you do NOT have a generator code, you do not need to set a nonce. just proceed with futurerestore using the blob file.
you'll get a warning before sep is incompat
Anyone? theiphonewiki does not have the page for this iPad
if you dont have a generator, you can't restore
I dont have a generator code and it still says Device ApNonce does not match APTicket nonce
you need a generator to get a matching apnonce
So my options now are only to update to 14.4? Waiting for the a13 fr update and trying again while in recovery mode won't work?
A13 FR is dropping in around 5 hrs
guess who's back? FDR
are you fucking serious
A11+ two issues in the past half hour
just an FYI: once it drops.. wait a little longer.. it may not work 100%
i think youre counting me twice

no someone else
i assume not using --latest wouldnt change anythiung right
cuz it starts the process
where do i get that?
should i try anyway?
using --latest will work on mac afaik
and stats sendign stuff
second person
yh latest is worth a shot
nah i used latest
fuck
That’s an older build and A11 tho
there was someone else istg
remember what Cryptic said abt FDR
screen doesnt change to green
is it supposed to or is that outdated but still in the program
it was cause of idevicerestore and what futurerestore depends on
as soon as one of them changes it can fuck everything
I have an iPad Pro 2020 on 13.7, and I have blobs for 14.2 to try to upgrade. Is the 13.7 SEP compatible with 14.x?
it should iirc
should i try root or something ? idk
For some people, it didn’t display a green screen, but still worked afaik
you mean 14.2 sep compatible with 14.4
which it is
the non-greenscreen is usually off timed
some devices show it.. others don't if the process thinks about it first
my iPad is on 13.7, if I upgrade to 14.4 I can't jailbreak
but I have 14.2 blobs
that's my question, is if I can upgrade
welp ill wait the 5 hours lol
you've been in quarantine all year.. 5 hours won't kill you
true
on the github for futurerestore
it says
compatible with 14.3-15.4b2 on a11 and above
will the SEP break though? i.e. Apple Pay and Face ID
and 14.0-14.5b2 on a10 and below
sep is compatible
15.4b2 ?
14.5b2
lol
okay good to know
compatibility is in pins
is there something broken with a11 below 14.3 then or what
So my blob file doesnt have the generator in it(I used blobsaver) but it says "Device ApNonce does not match APTicket nonce" when I try to futurerestore. what do i have to do?
here is more recent
its not
ur the first one to get an fdr error in a while
acc dont quote me on that
wait for a fix.. could be a bug in fr
its not a bug in fr
you need to set the generator
if its not in the blob you have to remember it
Just curious, what's keeping A13 from being compatible?
it makes no sense to set a generator if you don't have one
SEP
ah
well shit
every apnonce has a generator
the apnonce is a hash of the generator
damn, welp I can only give my energy to the devs 
you cant 'not have a generator'
or.. you can stay and still jb with 6.0
wait it says A11-A12 can only restore to 14.3 RC+
thats outdated
compat is in pins
got it
in which channel? I was checking the pins here
😛
I can go from 13.5 to 14.3 correct?
yea got those thanks
I have another blob on 13.5rc but the generator is this one: 0x1111111111111111
Will it still work?
13.5RC?
yes it’ll work
thanks!
I missed my 14.3 blobs. Can I go from 13.3 to 14.2 on an iPhone X?
Anyone here confirm he success to update XS Max to iOS 14.3RC and can help to make sure the files?
yes
its working
@zealous bridge ok, thanks
what does RC mean?
just make a backup
What’s the name of the files sep and baseband?
Is 14.3 rc still signed?
depends on oard config
Check pins
No
@zealous bridge ok, thanks again
I’m looking for iOS 14.3RC and this thing not talking about betas version
yeah you linked some next thing JTV doesnt have half the info
what device you on
@proven wyvern
@zealous bridge maybe dont worry about the FDR thing
cuz theres a PR 4days ago from cryptic with a fix i think
im trying to compile latest rn to see
Didnt you use the latest version?
what does fdr even stand for
yeah it should be
he sent that like 12hrs ago
i think its something to do with sep
then ig i wait for the otehr thing in 5hrs
btw i first set nonce in u0, then since ios install got froak i used checkm8 nonce setter
but that seems fine
FDR. From The iPhone Wiki. Jump to: navigation, search. FDR is a protocol whereby Factory Data is "reset" or "restored" to the iDevice.
thats not the problem
XS Max on iOS 13.5 with unc0ver and want to update to iOS 14.3RC with blobs using futurerestore on windows
also no 14.3 bloobs 
y does everyone keep calling it RC and not just 14.3
k one sec
RC is the beta
Is my generator automatically set once I jailbroke with Uncover 6?
There are some version on iOS 14.3
iOS 14.3
iOS 14.3RC
iOS 14.3RC 2
iPhone XS Max(d331pap) - 18D52
SEPOS: Firmware/all_flash/sep-firmware.d331p.RELEASE.im4p
BBFW: Firmware/ICE18-3.02.02.Release.bbfw
IPSW download link
what did i miss?
Make sure to get these files from the 14.4 IPSW
@sharp tangle oh god
any guides on saving blobs that works for new devices? ?been out of the loop
!t blobs
How to save blobs: FOR A11 AND LOWER ONLY (A12 = 2018 iPhones/iPads)
-
Go to this website
-
To get ECID: Go in iTunes and click serial number twice 3)To get board config/device model: Get BMSSM from the app store on your iOS device Enter all that into tsssaver and wait. It may take a few minutes. RECOMMENDED: Download&save the resulting zip and upload it to Google Drive or similar as backups. For A12, see this reddit post
Is my generator automatically set once I jailbroke with Uncover 6?
that ain’t fdr tho
this was directed to me?
this is an old old old old error like ancient
it just means that futurerestore is getting even more fucked
i remember you had to modify the ipsw or something
I tried using the link u sent and it says there isn't any text for iphone XS
Fdr error can still happen if you are a bad user and suck at entering recovery mode 
no
alright, any idea what i may have missed to get this error?
@woeful star it will only be directed at you if it’s a ping or reply
ok
ok i am bad user then ig :D
lol
@silent tusk even I had it tho it’s apples fault for making recovery mode dogshit, sep enters a bad state
do I run the jailbreak after restore rootFS?
has anyone succesfully restored A11 to ios 14.3rc on windows
yes to set the nonce
yeah
what did they use for sep and baseband
should it happen with multiple attempts tho?
i cant find anything on the pinned website for 14.3rc
nvram?
from irecovery or something right iirc?
or that doesn’t work in rec
not really, you can futurerestore and if it doesnt fail then its the same
@zealous bridge it generally won’t fix itself until dfu reboot
Is the rootfs necessary prior using FR?
istg
@tame badge no
Only to make a backup
Thank you
@celest basalt try this? https://www.theiphonewiki.com/wiki/Firmware
Use -u to update with future store then it won’t wipe data @tame badge
I had similar trouble finding 14.3RC for my ipad
- you need to be jailbroken to set the generator
i set it in u0 then entered reocvery
then it tried i had the fdr error
yes
so then i couldnt get into ios
so i used this
instead of the -t?
Dont you need an update blob for that
maybe that's what i've missed
Nonce isnt the problem
which seemed to work
chonk
Its SEP
Big no no
its gonna mess up something
fuuuck. Gotta back up again
same
saved me tho @zealous bridge
so does restore system on checkrain do the same as rootfs
huh
yes
Is the generator set automatically in jailbroken state with the newest Uncover on iPhone XS?
im going 14.2 -> 14.2 btw
I saw your comment, the fdr error -2 specifically means UNKNOWN error meaning sep has paniced
okay well
so what are my options if anyone can help me out here. im stuck at recovert
Well apparently SEP will clear that state after a DFU reboot so maybe you should try that
Someone got an answer for this? 🙂
ye u can check in the uncover settings
Okay it matches to the generator of my blob file. I'm good to go right?
its set to 0x111.. by default
how do we know 5 hours until update?
If u didn't restore rootfs before FR to another ios version, when you went to restore to your backup would it not work or does it just decrease the chances of it working
I'm trying now to futurerestore but keep getting :
ERROR: Failed to place device in recovery mode
any idea why this :/
ah nice thanks
just run again
its okay if you dont jailbreak after futurerestoring ig, but if you jailbreak you’ll 90% mess something up
Enter recovery mode manually
or that
Just successfully restored iPhone XR (A12) on 13.5 to 14.3 (not RC) using MacOS Big Sur 11.2.2 and FutureRestore v191
anyone can throw me a bone here guys? completely clueless of what are my options here, just stuck at recovery.
says apnonce doesnt match
well i know that
drag futurerestore into cmd then write “––exit–recovery”
it should boot you back out
of recovery
hmm ok let me check, but the question is more what was the issue for it to fail
what device r u using?
apnonce was set to default 0x1111..
you didnt set nonce
i8
it should match the on in your blob
hmm doesn't setting it to 0x1111?
yeah i had two blobs, one with 0x111 and another with a different one
so i choose the one with 0x111
ok
so i didn't had to change anything in u0
Do this: #futurerestore-help message
jailbroke and it should have set it to 0x1111...correct?
Do it with dimentio just in case
Make sure you’re not rebooting in between futurerestoring and setting nonce
nope i didn't
but will try that method and report back
thanks
hmmm --exit-recovery just boots into recovery again
install imazing from https://imazing.com and see if you can get it out of recovery
Am I the only one refreshing the repo waiting for releases?
could it have messed the current install?
cause it did went through sending firmware yada yada yada
if the loading bar appeared and it stopped, it might have
does anyone know if there is a version of futurerestore compiled for linux?
on the iphone?
yeah
hmmm well beats me
doesnt make any sense
Do i need to rootfs before restore with futurerestore?
Only if you wanna make a backup
is unc0vers nonce setter working rn for ios 14?
Then you have to rejb and set nonce
i think so
Pastebin.pl is a website where you can store code/text online for a set period of time and share to anybody on earth
But only in the app
What if i backup when jailbreak enabled ? Ok?
that's the output from futurestore
oh yeah
you’re definitely in a bootloop
thats ugly
thats really ugly
and i didn't see a green screen
how is that the third person with an FDR
brb, dinner time
hopefully i can get back from this, been hanging in 13.7 so long now
ERROR: Unable to receive message from FDR 0000000004220780 (-2). 0/2 bytes
ERROR: Unable to receive message from FDR 00000000042207a0 (-2). 0/2 bytes
ERROR: can't locate 'psi_ram.bin' in 'C:\Users\Local\Temp\ffffffffffffffffffffffffffffffff000000042'
ERROR: Unable to send baseband data
ERROR: Unable to successfully restore device
Cleaning up...
[exception]:
what=ERROR: Unable to restore device
If you get any of these two errors
These are futurerestore bugs
which will hopefully be patched soon
Hopefully this clears things up for anyone
You suggest waiting a little bit?
Any other errors are usually fixable
i got those errors
how can i check my nonce
i’d wait until the a13 patch is out yeah
alr thanks
you can set nonce via dimentio, or in jailbreak apps themselves, or via the system info tweak
tutorial in pins
shit no luck :/
what does this mean ? any idea please ?
you need to set nonce before futurerestoring
wrong channel
iirc dimentio doesnt work with the new exploit
Generator on unc0ver app
it doesnt
how can i check my nonce with futurerestore
you can run futurerestore and if there’s no error that means its right
for the new exploit only the unc0ver app works to set generator
gonna check soon thx
@zealous bridge any way i can get away with restoring to the firmware version i had before this? 13.7
you’re in a bootloop - only option is to restore to latest
i’m sorry
bootloop apparently
No show me?
what device?
Like send a picture
i8
Pastebin.pl is a website where you can store code/text online for a set period of time and share to anybody on earth
What does your phone look like
you can jb with checkra1n
🤦♂️
mah google pixel 76
kidding
lol
its stuck in recoveyr
how can i do that please ?
Are u in recovery mode
yeah
Use the command to break it?
tutorial in pins
it comes back to recovery
Substance message me
sure in 15m
Could anyone help me find a FutureRestore tutorial for Mac + A11 (iPX 13.5 - 14.3RC)? I have a couple of tabs open https://www.reddit.com/r/jailbreak/comments/k13c2l/tutorial_upgrade_to_141_from_135_iphone_xr/
check pins
theres like 3
Thank you
Haha my mistake. New to Discord
If your doing your iPhone 11, it’s cause it’s not fixed yet
someone took a one way trip to 14.4 ?
iphone 8
Could you get out of recovery?
basically a russian roulette
used blob saver and loved it, I should be fine right or any new apple weirdness that im missing out on
Still works
just make sure you remember your generator
with blobsaver
thats the only downside
i found
otherwise you wont be able to use blobs
@vivid nova when do I get genius for helping cryptic and Adam find testers /s
the one that you set before saving blobs
tf is that profile picture 
no idea
as soon as you tell me what itunes error 113 is
They both got the bounty already, right ?
An uNknoWN ErrOr ocURreD
pretty sure they did
I’ll pay you to tell me a fix
Or tell me why lol

Yeah they got them already
The admins on the Tweakbounty subreddit didn’t help at all so they messaged users themselves
the quilted quicker picker-upper

it makes sense ok
Do I need to be in jailbroken state to start FR?
how is my brain that consists of 3 brain cells supposed to understand that
No just make sure your nonce is set
so what are the issues with iPhone 11 series now i know the rose firmware shit got fixed but i want to know if any new bugs have been reported
You can be, or not, just set your nonce
No new bugs, I think they were fixing recovery not working on first try
But it’s done
that build ain’t public yet
I'm on XS Max so can I set it without being jailbroken?
They could push it tonight
the fix aint even out yet
no
I have it 
im Fed
ur beta testing it
good luck if yoj have to restore to 14.4
ok I set generator in unc0ver and saved blobs again but also made a notepad file for my previous save with the default massive generator. I am just going to save all that info associated with it but Ive got the 0x1111111111111111 and some other massive one
No I found ppl to test for me lol
better safe than sorry!
Fixed
Okay so I start the progress while jailbroken with no tweaks installed
We found ppl with spares
hm i’ll believe it when i see it
Ask @dull swallow
if anyone else has any ideas before i hit restore and update please speak now 🙂
What happened
i was in the fix testing server
you’re in a bootloop damn
lol
futurestore happened
Where did it fail
/s
and i might have messed it up somewhere
Funny
not sure
Pastebin.pl is a website where you can store code/text online for a set period of time and share to anybody on earth
true
Baseband issues are fixed
The old fdr error fixed
Everything else is bad blobs usually
bootloop always means restoring to the latest firmware?
bro psi_ram.bin was pita
Or so yall think
clearly they arent
yes
damn, i don't know what's using an iphone without jaibreak for years
@woeful star what iOS to and from
bro
13.7 to 14.3
breaks touch id
14.4 has a jailbreak
@woeful star Windows?
yes windows
yeah well
is there a mac version?
just keep it in your pocket at all times
physical security > software/hardware security
Is my generator only set after I used Uncover and the device is in jailbreak state?
and how do i use apple pay?
Knife>password
tru
lol
Thats only if ur getting robbed tbh
the knife will overcome the password beater
bearer*
Someone has an answer for this? I'm about to FR 🙂
yeah ok lets say i have a big knife instead of touch id
should i pay with that knife?
😛
You have to be jailbroken to set your nonce or generator
pay with your bank card omegalul
As long as the app shows your proper nonce you want it should be fine
pay in cash
u0 from what i know sets it when you jb
i hardly use cash
Turn off tweaks and run anyway why not
well it should have set it for me but it didn't
Won’t hurt anything
imagine using actual cash in 2021
apparently
Well if you have an asian family its not hard to imagine
Only way I tip
Okay appreciate your help!
Wish me look 🙂
oh well, ok so im restoring then
Should I wish you sight too
All i use is apple pay. i don’t even take my wallet with me, because there’s no point
well i take my wallet but yeah apple pay is most of my payments
can someone help me i've been following #futurerestore-help message this tutorial and every thing's worked up until step 9 and then i get ''bash: ./futurerestore: No such file or directory''
you need to cd into the folder where futurerestore is
if it’s on the desktop you do “cd Desktop/futurerestore”
make sure the folder is ok the desktop and called “futurerestore”
After rootfs, how to set apnonce?
you have to rejailbreak
What ios version
How can i confirm its the right nonce? iOS 13.5 unc0ver
Go to the unc0ver app > settings > scroll down to where it says generator
Click on it then you can enter your generator in the text field
ok it seems that there is an issue with my system with v191 (on macOS)
It’s says 0x1111111111111111 that is the right one
Then leave it
sorry for the hijack
that depends on u
Just rejailbreak
“problem” is very specific
well the thing is
Do i need to look for something in the blob file?
Id rather you pastebin it
How to fix issue with ibec enable to enter on recovery mode on windows 10
ok
you said its the right one
The generator is in the blob file
Open in a text editor and search for generator
https://pastebin.com/raw/Ns6TEh9X (removed the SN)
doesn't it depend on device tho
what cable and port are you using
How can i config this with the blob file?
lightning to A
I just explained
Look above
I have both official and a 3rd party
no but fr, can’t i just add the repos and shit manually to pacman and use the rest of the script to compile fr ?
Windows or mac @strange yew
i cba to create a bootable usb, + i have zooms n shit
https://www.reddit.com/r/jailbreak/comments/aqbey5/tip_fix_errors_8_and_10_while_using_futurerestore/ this fixed it for me
i had that issue
on macOS it breaks and on windows it works, but like I have issues on windows so I don't want to mess things up
If you’re on Windows yeah that will fix it
will check
oh
it's windows
macOS probably fuckin something up
maybe with iprozy
iprozy
cant spell today
libusbmuxd maybe
I have two shsh2 blobs, which means two generator strings. Which one do I use? 0x1(16) or some random 0xbd34... I'm using igennonce and none of them match the ApNonce
yeah
0x1111... is unc0ver and 0xbd34... is odyssey, use the jailbreak that you were using when you were saving blobs
I used TSSaver'
oof, brew says that it's up to date
You can use either
Try compiling it from source
Oh oops, my bad, I misread
shsh.host only pulled one board config (the incorrect one) for my iPhone X when I requested for iOS 14.3
Did you save blobs with the right board config?
Quick questions with A12 blobs, you just set your nonce to the one you used when getting ur APNonce and saving your blobs right?
Generator, not nonce
What happenend here? The deivce is in recovery mode...
Ignore that
Carry on futurerestoring
What should I write in terminal?
I saved as iPhone X (Global), which is what my phone is. ios 14.4 has both board configs included, but not 14.3
The command
You shouldve saved with the right board config
The exact same one I did before?
Yeah
futurerestore -t blobs.shsh2 --latest-sep --latest-baseband iOS14.3.ipsw
This one right?
yeah
Thank you
one question, SEP must be from the current signed verion? or from the one i want to restore to?
i mean theres no option for a board config it should just give me both configs. no?
so i just startet futurerestoring and it says: ERROR: Failed to place device in recovery mode
futurerestore: failed with exception:
[exception]:
what=Unable to place device into recovery mode from Normal mode
But my device is in recovery
do I need to restorerootfs before downgrading?
there is an option for board config when saving blobs
press up arrow on the keyboard and enter
run the command again
Only if you wanna make a backup
Sep must be compatible with the LATEST version of iOS
ok its happening wish me luck
Tanbeer deserves a promotion at this point ngl
Strgulling to restorerootfs because because checkra1n won't show up
yeah but the SEP im pointing futurestore to in this case is from 14.3
this is exactly what i see excluding my ECID
right?
you incorrectly set nonce
where is the option for board config?
you did a big no no then
Selected BuildIdentity for request
Variant: Customer Erase Install (IPSW)
This restore will erase your device data.
Extracting filesystem from iPSW
ERROR: frite: C:\Users\Jannik\Desktop\futurerestore\iPhone11,8,iPhone12,1_14.3_18C65_Restore/038-83400-077.dmg.extract
Cleaning up...
[exception]:
what=ERROR: Unable to extract filesystem from iPSW
code=59834385
line=913
file=futurerestore.cpp
commit count=192:
commit sha =57d0b1b055744600783e7aaf5d2ba4ec9d25f16a:
Done: restoring failed!
free up some space on your hard drive
How can I safely get out of this now?
Exit recovery
./futurerestore ––exit–recovery
type that command in
yh lol
right, thanks
@zealous bridge can you scroll up and show me where to select boardconfig plz
i sent a screenshot
ik its too late now but i never even saw the option
It won't let me
Does the -u argument in FR keep your data?
i have the blob saver thingy running on my PC with the apnonce set from recovery mode and shit so does that mean as long as I have a blob saved and I remain Jailbroken on 14.3 I could futurerestore to say, 14.4 even after no longer signed?
its on tsssaver i think
try “irecovery -n”
Google is nice
You need a specific type of blob to use the -u parameter
which you dont have
Failed with error code=2
I see
so i just shouldnt have used shsh.host? im just confused cuz some of the versions i have saved have both board configs and others dont
might have to try third party
Follow the hardware buttons on that site
ig so, im sure it should have something like that but apparently not
hardware wont work in this situation
Shsh.host doesn’t save update blobs
So if you don't backup your phone before FR you're essentially screwed then?
?
a hard reset while in recovery mode only takes you back to recovery mode
Just starting fresh
dang that sucks i guess
Personalizing IMG4 component iBEC...
Sending iBEC (1189090 bytes)...
ERROR: Unable to send iBEC component: Unable to find device
ERROR: Unable to send iBEC to device.
Cleaning up...
[exception]:
what=ERROR: Unable to send iBEC
code=64684049
line=987
file=futurerestore.cpp
commit count=192:
commit sha =57d0b1b055744600783e7aaf5d2ba4ec9d25f16a:
Done: restoring failed!
“Hold down the Sleep/Wake button (or Side, depending on your model) until the iPhone turns off and then let it go. Depending on your model, you may also need to hold the Volume Down button.
Keep holding until the Apple logo reappears.
Let go of the button and the device will start up.”
FutureRestore for A13s isn't out yet right?
No
Can I just try to reconnect the phone=
No
should i make some sort of post somewhere? if it's supposed to save both board configs for my device and didn't then its just a bug, no?
what device were you on again
This just popped up...
ignore itt
Puh I got out of recovery
just tried to futurestore again and it tells me futurerestore: failed with exception:
[exception]:
what=SEP firmware doesn't signed
i told you
So what did I do wrong?
shouldn't it say the same error that before?
you have to get the sep and bb from 14.4
How do I do so on Mac?
The apnonce in your blob and in your device dont match
im on iPhone X (Global) w/ d22ap board model
Should i see “Jailbroken” in Unc0ver before run futurerestore?
iphone x doesnt have multiple boaed configs
it normally does
So the blob is useless in my case?
no you just need to make sure the generators are the same
I guess 14.3 isn’t longer signed?
No
does anyone know how to fix missing sbl1.mbin error
Crap 😅
Send a screenshot
Inside of the blob its "0x111..." and in Uncover too...
I mean “Re-Jailbreak”
what device are you on
back to Cleaning up...
[exception]:
what=Device ApNonce does not match APTicket nonce with 14.4
means ur jailbroken and the generator is set
XS Max
didnt set blobs right
So I’m good to go
you probably wrote down the wrong generator then
so they probably are useless
try the 0xbd34 ones
its strange cause i jailbroke with u0 before futurestoring
and default is 0x1111..
and my blobs nonce is 0x111.
sounds like it gl
Odyssey works on my device? I'm on 14.1
@woeful star why do you get a different error every single time you try it
No
beats me.. lol
okay, if the iPhone X doesn't have multiple boardconfigs then, what could this error be? I verified blobs w/ both tsschecker & shsh.host. isn't this just saying my blob's board is d221ap but my phone's board is d22ap?
Just set the generator in unc0ver to the 0xbd... ones
Where can I actually find it?
0xbd34a880be0b53f3
Do I have to copy this inside of the blob too?
GSM and Global i think
Not the only one lol
join the clu
No
club
“Big oof”
This is inside your blob already
Just set it in unc0ver and try futurerestoring again this time download the blob witb 0xbd34 in it and use it in the command
So I will leave the blob as it and change Uncover generator to 0xbd34a880be0b53f3?

