#futurerestore-help
1 messages · Page 24 of 1
yea
@shy magnet @storm apex @vivid nova
I have right now downgraded my A10 iPhone 7 from 14.4 DIRECT to 14.0. So the SEP/BB is compatible.
Have used some of the builds from yesterday night.
Version: de444ceee137537615a36b53aa7c7e58d2b7c21d - 191
...
Extracting iBoot.d10.RELEASE.im4p...
Personalizing IMG4 component iBoot...
Personalizing IMG4 component RestoreSEP...
Personalizing IMG4 component SEP...
Sending NORData now...
Done sending NORData
Fixing up /var (17)
Creating system key bag (50)
ERROR: Unable to receive message from FDR 0x7f9838001940 (-2). 0/2 bytes
Modifying persistent boot-args (25)
Requesting EAN Data (74)
Unmounting filesystems (29)
Unmounting filesystems (29)
Unmounting filesystems (29)
Unmounting filesystems (29)
Unmounting filesystems (29)
Unmounting filesystems (29)
Got status message
Status: Restore Finished
Cleaning up...
Done: restoring succeeded!
So if the new builds don't work, it must be something with FR and must be fixed because the old build work.
mustve done something wrong
i’m not confirming compatibility until a11+ tries
nope
exact same process for 14.1 and 14.2
14.1 didn’t work
FINALLY
Maybe I can try from 14.4 direct to 14.1.
Maybe others have A10 devices and can test? I have to go now and can test 14.4 to 14.1 in a few hours when I am back or tomorrow.
hmm
I can test, I’m just doing a backup right now to the case everything goes wrong
Can test to 14.0/14.1/14.2/14.3
A11
@shy magnet
I blame your headache
It says valid but a12 devices have nonce-pair thing so how do I know my device nonce and saved shsh files nonce thing matching or not
I have successfully downgraded to 14.1 with the FutureRestore that we have to compile in Pin, iPad Wifi A9, i can confirm that 14.1 SEP is compatible with 14.4
was the entire issues section of your futurerestore fork removed? my research on recovery mode detection was there
it's ok if it's fixed, but if not, why remove the whole section?
@shy magnet https://twitter.com/stek29/status/1093252326587072513?s=21
Is this why A13+ restores are not working?
Blobs need to be saved with apnonce on device while in recovery mode?
for everyone on A12: Good news, bad news.
Good news: Here's a nonce setter (see offsets I've added for my device to port it to your device): https://t.co/sIEPZB8oIc
Bad news: your blobs are useless, A12 has nonce entangling enabled.
279
?
they don’t
also that tweet is really old it has nothing to do with futurerestore not working
that tweet is super oldddd
So nonce entangling is not an issue here?
based on the pin, has linux been fixed yet for compiling?
Anyone got future restore working on A11+?
Yes
what device do you have? how did you do it
I already tried that on a Catalina Mac and a Catalina VM
with --latest-sep --latest-baseband
and with manual sep and bb
I guess I'm just unlucky lol
A11 isn't working. Tried on Catalina Mac and Catalina VM.
whats the error here
idk, I closed out of my terminal. I'll try it again and send it
...
Can I update to iOS 14 with futurerestore right now? I’m on iOS 13.5 a12
I have blobs saved
yes
I’m glad i didn’t use FR last night since A13 is broken... I would’ve bootlooped my device lol
Hi guys I have iOS 14.4 and have 14.3-14.2 BLOBS Saved for my A12 device how can I future restore to 14.3?
Can I use 14.3RC to restore
you can’t futurerestore @celest basalt
i know but i have a device on 13.7 with 14.3 blobs
What device
XR
oh, there was a little confusion when you said you had ios 14.4 A12 lol
Check the pins for a tutorial
I have 2 devices
what version are you on currently and device
however i don’t think you can use FR on windows? pretty sure u need a mac or linux
futurerestore doesnt work on windows
one is XS Max on 14.4 and one is XR on 13.7 Oddysey
@zealous bridge 13.5 a12 jailbroken
u need linux or mac
you can futurerestore
I can download linux
check the pins for a tutorial
someone ping me when i can use FR on A13 lol
dont think anyone will remember by then lmao
according to JTV, 14.5 sep hasn’t changed and it’s still compatible
so that means you can update to 14 whenever the Jb is out 
@zealous bridge no high sierra static is a priority
I also have other projects to do

I’m going to try to compile it myself this time
See if that changes anything
Takes a hot minute to compile huh

Im willing to put my A12X to test i have blobs for iOS 14.2+
@calm isle can you try 14.2? i assume it will FDR err and yiu can just exit recovery and be fine. but we need a11+ tests for 14.2 specifically
I have a mac i just don’t know how to do it mind if you help me😅
I’ve been trying yesterday and this morning. Haven’t boot looped yet, hope it remains that way ha. I heard a13 was working at one point last night I think
Someone got through on Ubuntu a13 but something has changed server side since then?
im actually super busy today so its ok if you cant
normally i would
Shoot the link
Im on bigsur is that gonna work
nope bigSur wont work
Its known to cause some issues
Yikes
its recommended not to try it
^^
Someone got thru on big sur earlier today
but
a lot of people have been bootlooped
and since ur a12
no second chances
Can i go downgrade catalina without losing data
idk anything abt macs
You mean ill be forced to update to 14.4?
F
Aight i wont risk it I kinda sold my iPad and bought another one just for the iOS 13 update 😅
I basically got scammed and shoot myself in the foot by doin so

So what’s the “safest” / most successful method
What iOS u on @celest basalt
13.5 A12
What frvice
Ur fine just stay where u are
Bruh
can u be more specific
No jb is released yet if u fuck up ur doomed
Has there been a fix?
So I should hold off until then huh @calm isle
Or like ones thats getting tested
Will A12X boot loop on macos bigsur
13.3.1 sucks anyways so like
13.3.1 sucks anyways so like
@stiff hazel can u stfu no one asked
ok
you’re not even on ios 13.3.1 and you’re the one bitching about it
I am lmao
damn
You forgot I have an SE1 on 13.3.1
same
no it has codesigning bugs
cant remember
harder to sideload apps, have to do workarounds
13.3.1 is just codesigning bugs that’s about it
My experience but im on A12 went from 13.5 -> 14.3RC used Big Sur and it worked fine
ohh i think i remember being on it
it was the last version i was on before i started jailbreaking lol
on 13.5
With FR?
Yep
i’m just gonna wait until FR is confirmed to work on A13 @storm apex
Yeah its a mixed bag
It says iPhone 8 tho
Old tag. Havent updated yet
I got a13 too
Has something changed since this morning?
No
Oh then what do they want to test?
not sure
well it's broken
so they probably want to test if it's fixed

If nothings changed since this morning, can confirm broke
No boot looped thankfully
Sounds good
Then apologise to your phone after
for making it go through all those wipes
well doesnt the phone get a say in this
Lol
....
big brain moment
Couldn’t you just run the Rosetta thing to checkra1n like they did with terminal?
M1? Slow?
Hello
You think it would make a difference if I updated to 14.4. Checkra1ned and tried downgrading from there?
Difference in terms of anything
that would be extra work
It’s great that there is news about FutureRestore but the biggest problem has always been about SEP compatibility - Is this no longer an issue with the new version ?
hi
Any good tutorials for linux ?
Pins
question: adam said yesterday in a tweet that there were issues on linux yesterday, have those been fixed?
@storm apex can you help guide me though the process of futurerestore
i have shsh2
and thegithub master downloaded
frcoal
futurerestore allows you to upgrade/downgrade/restore to unsigned iOS versions if you meet certain requirements
[Tutorial](#futurerestore-help message)
i have an A12Z. hypothetically, if i reboot into recovery, run irestore -q, and my nonce doesn't match my blobs, what should be done? i'm trying to work up the courage to go into recovery mode.
my generator is set to all 1's by uncover, but i'm trying to understand what happens if i get the wrong nonce.
If you have the wrong nonce, future restore simply won’t work and give you an error
It’ll say something like your apnonce doesn’t match your blob
sure so would i reboot into recovery again until i get the matching nonce?
Yes. For example I’m on iPhone X. I boot my phone up, jailbreak, set my nonce, then manually put it into recovery mode by pushing volume up, letting go quickly, pushing volume down, letting down quickly, then holding side button until it’s in recovery.
you can't actually set the nonce, right? you can only set the generator, and hope you get the right nonce. is that right?
But the process for A12Z might be a little more complicated because of the entanglement stuff
All I know is I set my boot nonce in my settings app using the system info tweak. That’s all I know, sorry if that isn’t much help lol
no problem, i appreciate the input
just trying to have a plan for things that can go wrong, and right now it seems like the wrong nonce is maybe the most likely bet
Yeah it sucks especially for you because if you brick, you’re screwed and have to update to 14.4. For me, 14.4 isn’t that bad because I have checkra1n to fall back on. Where I can still set my nonce
i haven't seen anyone discuss the proper path for having a correctly set generator but the wrong nonce
nothing about it in the tut
but it seems that's a possible if not likely scenario
hi, super dumb question (but its my first time FR-ing): i got my blobs for 14.3RC via tsssaver and there’s two .shsh2 files in the 14.3RC folder, which one should i use (the guide says “get your blob and rename it to blob.shsh2”)
@trim vigil the part of the name that's different is the nonce. you need whichever nonce your device is using.
i see it says for mac here and no mention of linux can it also be used for linux? sorry I’m a little slow 😣
I see, thanks a lot for the info! Is there a way to check which nonce I’m using? All I know about nonce stuff is that I need to run the nonce generator as per the guide’s instructions...
I try today new FurureRestore on VM and is work perfect i know Adam say is not recommanded but i don’t have choise to use
^ that should probably be pinned
good looks boss
Hey sorry for asking this (you’ve probably had this a lot today) but is 14.2 restoring really not a good idea? I was wondering if it’s due to SEP compatibility or is it just not tested?
i believe if you run irecovery -q with your device connected in recovery mode, you'll get some key values including the NONC
woops yes
Thank you!
yes
oh wait uhh
i think the minimum is 14.3 but don’t take my word
because i’m not 100% sure
Yeah I saw it’s 14.3
But why wouldn’t it work on 14.2? Cause there isn’t any SEP changes between them
capt was able to FR to 14.0.1 so honestly i would just wait a bit to see if that can be fixed
can’t say for sure but i think you might be able to use lower than 14.3 blobs in the future
They managed to go to 14.0.1? Okay so 14.2 should work in theory....
that is if sep doesn’t change in newer ios updates
True
They managed to go to 14.0.1? Okay so 14.2 should work in theory....
@celest basalt in theory yes, in practice not yet
Ah okay
just gotta be patient haha
me too, FR is broken on A13 so i’m waiting too lol
Love the semi-tethered stability though
I use vmware with Mojave
Love the semi-tethered stability though
@celest basalt odysseyra1n is the best jailbreak 👌
super stable
checkra1n is good too but it uses substrate 😬
I hate having no passcode though it’s worrying, luckily I’m not going out much cause of the lockdown but it’s still worrying
worst case scenario if FR fails, you can still jb on 14.4
i haven’t personally used FR though
Yeah, I switch between the two, I just used succession to restore (14.0) so I haven’t go round to installing odysseyra1n yet
Tss saver site can’t retrieve my blobs is there anything I can do ?
True
Maybe try saving them again?
i got lucky and found 14.3 blobs on TSS saver when i thought i didn’t have any 😂
np!
any advice for an a12z that can't enter restore mode? FR starts to do it's thing from recovery mode, I get an empty progress bar and FR says 'Waiting for device to enter restore mode', then a few minutes later the ipad reboots back into recovery
(sorry, misread, need coffee)
be careful with how many times you go into recovery i think the apnonce can change
if i’m not mistaken, feel free to correct me if i’m wrong
er well
also pretty nervous/sure that my old OS has been blown out at this point
would love to be wrong about that
only rebooting to normal mode changes the nonce afaik
only rebooting to normal mode changes the nonce afaik
@celest basalt my apnonce hasn’t changed and i’ve rebooted many many times since i saved my 14.3 blobs
are you talking about generator?
do you jailbreak again every time?
mhm
because if so, that's why
ah ok
the jailbreak automatically sets the generator
thanks for the clarification
the jailbreak automatically sets the generator
@celest basalt i manually set it with tss saver because it’s not the 0x111 generator automatically
is that still okay
System Info tweak can set it too
yeah it's fine
anything i can do? :/ It says "Device can't enter to restore mode", code 67502097, line 1030 of futurerestore.cpp
i use dimentio, it’s fine either way
btw does anyone know why I'd have two blob files (two nonces)? I can't find anyone else w the same issue...
my nonce doesn’t have to be set when saving blobs right?
my nonce doesn’t have to be set when saving blobs right?
@maiden citrus if you’re on A12+, you do
shit so i have to use dimentio and set it to 0x1111 or whatever
unless you can remember it for when you use the blobs
shit so i have to use dimentio and set it to 0x1111 or whatever
@maiden citrus yes
that you don’t have to worry about, you just have to make sure that your current apnonce is the same as the apnonce on your blobs
so if my boot nonce is 0x267a4801eb5ca360 rn does that mean that all of my blobs are invalid?
i’m still jailbroken
check your blobs on shsh.host or TSS saver and make sure it matches
is there a way to check my apnonce without linux/restoring/irecovery (i dont have linux/mac and wanted to get everything ready for tomorrow when i go to a friend's place to use their mac, so i wanna check i have the right blob in advance...)?
@golden silo my blobs say that my generator is 0x1111... and u0 says that my generator is also 0x111...
blobsaver has a feature to check apnonce on windows
so is generator not the same as boot nonce or?
lol then why you helping me
sorry that was a bit rude
i’m in the same position where i’m not a god but know a fair bit
thanks that worked for me!!
@shy magnet @storm apex @vivid nova
Have tested the other iOS versions on my A10 iPhone 7.
Version: de444ceee137537615a36b53aa7c7e58d2b7c21d - 191
14.4>14.0 successful
14.4>14.0.1 successful
14.4>14.1 successful
14.4>14.2 successful
14.4>14.3 successful
That's a given
14.5 b1 works too @subtle cosmos
On ubuntu.
am i able to update with future restore from 13.5 straight to 14.3 rc with blobs or do i have to update to 14.4 then use future restore to go to 14.3 (i dont really get how the baseband and sep things work but i have blobs for 14.3 rc and am currently on 13.5 iphone 8+)
@shy magnet would it be difficult to make a futureb00ter?
define futureb00ter
lol
Linux USB boot for futurerestore
Trying now with latest FR from 14.4 to 14.0. When this fails the latest FR have an issue.
probably not
literally just fork bootra1n
and throw futurerestore & libs
instead of check
but
Isn't there a licence?
should i have an idevicerestore command after compiling? i used the linux script and i haven't got one.
?
how’d you get the ipsw and blobs and shit
no
for a future b00ter
i'm on an A12Z, stuck in recovery mode. seems after FR tries to boot the ipad into restore mode, its no longer recognized
You'd add in the network drivers etc
It's no different than booting ubuntu
oh
oh yeah then just fork it
ive never use future restore before so any help would be appreciated
Look at the pins, should help you out
But regarding your question, you're able to go from 13.5 -> 14.3RC with your blobs
you can do it directly
thank you
the source version doesn't really matter, only so far as having the ability to jailbreak and set the nonce on the current version
do you guys have a link to a tutorial because i dont really know how to use future restore
Pins
i heard somethings about compatible sep and basebands but idk what that means
SEP/BB compatibility is target version compared to currently signed iOS versions (which is only 14.4 right now)
if it's not compatible, then you can't restore to that version with futurerestore even if you have blobs
14.4 SEP/BB is compatible with at least 14.2 and 14.3 (and I think 14.0 and 14.1 on some devices)
thanks
we can get SEP blobs technically but we don’t have a SEP nonce setter
we have a SEP exploit so maybe it’ll come soon
well; i used blobsaver and it:
- generated a blob with a nonce
- using the "read from device" nonce option it gave me a Different nonce
is this normal? from what i understood it was supposed to be the same nonce number?
baseband might be possible in theory, but SEP is the Secure Enclave which is more protected - on A8-A10 an exploit does exist that will allow setting SEP nonce in the future but on A11 and above it is not possible to bypass that security atm
well lets start saving SEP/BB blobs
@shy magnet @storm apex @vivid nova
Have also tested 14.4>14.0 successful with A10 iPhone 7 and latest FR version on Ubuntu.
Version: 3786d4cd230b93f4b7ade7d0fdebd56b48fbf7a6 - 189
So I would say that 14.4 SEP/BB on A10 and maybe below are compatible with 14.0-14.3.
Maybe you guys can update the pinned post and on github.
ran the "read nonce from device" again and got a different nonce again (the same i got as the saved blob)
is this normal anyone know??
All blobs in the last few years have sep tickets so it’s fine
Fax 14.0beta5 with14.4 sep on a9
i don't think baseband blobs are a thing
i dont even think it has a generator
So does FR work on Big Sur? I keep seeing conflicting info...
they are but idk if tsschecker/tsssaver/etc. saves them
they don't
you can get them from iTunes during a restore supposedly
probably
but it'll be a pain to do that over and over again
and future restore doesnt even have support for SEP blobs yet alone support for BB blobs
baseband may not need an exploit but I have no experience with that so take it with a grain of salt
So does anyone know if its normal to get a different nonce in the blob filename and a different blob when you "read apnonce from device"?
it probably shouldnt
you should make sure your generator is set before using "read apnonce from device"
Is there a guide for future restore?
i see, so its fine to trust whatever nonce im getting in the filename i got from a 14.4 blob from blobsaver? my issue is that tsssaver gave me 2 blob files for 14.3RC and im trying to figure out which one to use
set the generator again and check the nonce with igetnonce (or simply save 14.4 blobs and compare)
if you know which generator you set and the apnonce matches one of the blob files, then use that one (just set the generator again before restoring because rebooting will reset it)
my 14.3 blobs have a matching apnonce to my current one and the generator is the same, so theoretically i should be good
i think
okay
true
thank you!!! just tried what u said and finally got a matching apnonce to my blobs so i know i can safely use them^_^
what should I know before futurerestoring to 14.4 from 13.5? I have blobs, iPhone SE.
also, which version of future restore should I use?
isnt 14.4 signed right now? like you should be able to restore normally to it?
yea just checked and 14.4 is signed so u can restore w itunes normally, maybe u meant 14.3?
checkra1n does support 14.4 right?
im no expert and i dont wanna give u wrong info^
i just knew 14.4 was still signed cuz i’d happened to have checked it like 5 mins earlier
Could something like checkn1x/bootra1n be made for futurerestore to work on a live usb boot?
yes
@vivid nova said something about it
working on it
nice
Cool
what are you trying to restore to?
what blob file/and what args?
you didn't answer the q
VM’s aren’t tested
vms should work
Сan anyone add support High Sierra ?
i wouldn’t attempt it even if it was confirmed to work
bruh
blob file
not where its from
is it 14.3 RC?
okay, and what args?
you don't need -s -b -p -m...
just --latest-sep --latest-baseband
what error
try it again
so i compiled using this compile script for linux: #futurerestore-help message , but afterwards is tells me that ./futurerestore is a directory, and not executable.
Don’t type in ./
hey, how do I set my generator when I don't have a noapnonce blob?
nevermind found one with 0x111... generator
check your network
oof didnt realize i need both the 14.4 ipsw and the 14.3 ipsw
correct? I need both?
@shy magnet okay, updated bootra1n.. is there a static fr for linux?
there is not
oof
i wouldn't make a static build too
until we fix the current bugs
and have a ver that "just works"
ive got fr compiled with linux ubuntu 20.10, im just downloading the 14.4 and 14.3 ipsws to get out the im4p and bbfw files I need to be ready to future restore
once the jb drops so i can upgrade to 14.3
A13 in general still doesn’t work I think
im on a12
get out the im4p and bbfw on 14.3 ?
im following this tutorial: #futurerestore-help message and it says get the ipsw of the latest and the target version
I don't know why I have to download ios 14.4 as well because it will downgrade to ios 14.3 ?
Does generator and ap nonce matter during future restore or only generator?
Very confused what the difference is
im trying to figure out if n841 is iphone xr
because it says that n84is iphone xr, but i have an n841 sep file
Should be
like it says sep.firmware.n841.RELEASE.im4p
well im dumb and forgot that telegram bot exists
What do I need to worry about for future restore
do you have an apnonce/apticket?
Blobs?
essentially yeah
Yes
what are you jailbroken with
there is
Where
hang on one sec
I see apnonce
go to settings
and hit set apnonce generator
and if there is anything there
write that down
So ap nonce is the same as a generator?
no
Wtf
It says apnonce generator and in uncover it says generator only
either way, what does it say when you hit that
Ok so my blob says what generator they are and I’ll set that in odyssey before I restore?
k good
yes that is your generator
i used to use uncover
not quite
before i jailbroke with odyssey i reset my generator to the 0x1111111111111111 like with uncover and then jailbroke
but yes
before you futurerestore
that generator needs to be set like that
the one you currently have set
Shshhost
were you jailbroken with odyssey when you saved that blob?
Yes
so that means the generator set in it right now should be the generator used in that blob...
im trying to think here
and how did you get your apnonce
you can get it from blobsaver, but see what im trying to figure out, is that im looking at the shshhost website, you specify a generator. did you specify one or not?
No
Whatever was set
One last question
So the only thing that I need to do is go into odyssey and match up the generator with my blobs and restore?
my only issue is that the wrong generator would be set and you would be screwed
if we cant figure out what it was
I have my generator though
but was it that at the time you got your apnonce is the question
you have to like go to recovery mode, and its still a bit extra, but yes you would get all the files needed, and then make sure you are jailbroken with the correct generator, and then you can futurerestore
im trying not to go offtopic, sorry
if you need help getting your apnonce im sure one of the geniuses in genius bar 1 or 2 can help with that
should be yes
Ok so I’m good
So as long as I have the same boot nonce from when I saved the blobs and the same generator I’m good
yeah
so what i would do, is ask one in the genius bar how to get your apnonce, as there are many different ways that i could get into, but i would be going way offtopic, and then see which one matches the one you have
and i would try the generator your currently on (the 0x34 one) and the 0x1111111111111111 (16 1's ) one in case you got it when you had uncover
The generator I have set in odyssey right now shows as my boot nonce
Want to ensure with the iPad Pro 11” 2018 (A1980) I am supposed to use the regular future restore, I believe it has an A12X
WAP WAP WAP WAP WAP
Thanks @shy magnet for all your hard work
190 through 193 was broke
So A13 can’t go from 14.4 to 14.3? I have all the blobs.
n
and yeah i've determined big sur/linux is not an issue
Yes but use can backup and restore data
thinking if it is worth the risk to wipe my phone and restore from backup
@storm apex can you help me with the process of future restore? I’m on a12 and iOS 13.5 and I have shsh2 saved on my pc for 14.3RC I also have future restore downloaded
@river lantern I got high sierra version, want to test
@storm apex is it like not possible to restore or not possible for you to help me right now
Please Capt inc I bought a tweak from u like a month ago
U mean cant restore data form backup iCloud?
@hearty forge theres a tutorial in the pins that tells you exactly how to do it
wonder what the error is with A13/A14 probably something with idevicerestore or some modules
Restore form iCloud
He means like restore a backup from iCloud
Yess
Hi! I tried to compile futurerestore via the script provided in this channel, but after running it as per the instructions im getting “command not found” when i type in futurerestore
if it’s important (these kind of seemed like errors to me?) the last two lines before “Done [the compiled futurerestore...]” were
make: No targets specified and no makefile found. Stop.
make: No rule to make target ‘install’. Stop.
Any and all help appreciated!
any1 on sierra, high sierra, or mojave?
I'm on mojave
static build testing
so... why did you ask for those macos versions?
thanks! i tried looking around but couldnt find one for linux (i only found the mac one), any idea where i can find it?
I'm not sure how this futurerestore thing works, but if you're going to attempt this would it be a good idea to uninstall everything jailbreak-related first?
I guess I can help with this? 
How
anyone have precompiled FR for linux?
if no precompiled FR, maybe a guide on how to compile it for Linux? script is not working for me 😓
im sorry for the dumb questions i swear i searched around and couldnt find it...
@storm apex dont even have to restore just run the bin
that’s the one i tried and its giving me “command not found”
futurerestore
i ran through the guide u linked and at the end it just says “futurerestore: command not found”
i mean yeah ill try to figure it out myself but im dumb af @ linux so if theres some obvious solution...
@storm apex
After using fututerestore go to ios 14.3 I can't restore backup form itune or icloud, I understand correctly?
@shy magnet A13 is still broken right?
yes
okay it kinda looked like it was fixed cause your tweet
i tried running the script multiple times and same result... guess its not possible to make FR work for me rip... thanks for the help anyways^^
ok ty! i'll try 189 tomorrow :)
@storm apex W
extract the ipsw or just use latest-sep and latest-baseband
xs max
use sepbb
@storm apex
@exotic spire 14.4 ipsw, sep/bb also need BuildManifest
@storm apex

what is build manifest @valid adder
@storm apex so the sep and broadband are for the target version?
Ok
@storm apex just to confirm latest means latest iOS version avalible for my phone?
Like iOS 14.4
Ok
am i good to go?
@valid adder
@storm apex
so just delete both
i have that
i just run the commands in terminal correct?
ok thanks
@storm apex when I rename them do I keep them in the same folder or move them to the restore
Cuz right now and originally it’s in the firmware folder
@storm apex do i need to rename the future restore to just futurerestore for your command to work?
ok
@storm apex I renamed them and they’re in the restore folder, do I delete the latest folder
Here we go
Thanks capt
@vivid nova how did the bootra1n type thing go
@storm apex where is the set generator on uncover I don’t see it
settings
top left
at the bottom
What do I put for it
a generator that matches your blobs
I have to burn it.. So far, I've got the latest checkra1n on it and FR
nice
@dull swallow where do I get that
in your shsh blob file
Also I'm going to try to change it where sudo isn't required
Ok
good luck with that
@dull swallow is it in the name
no
It's really not hard, you just remove the password so you're default root
I just used system info to get my blob
i used system info and it has a gen in the blob
a13 is still broken
@dull swallow so what I do here
Since u did same
I don’t know how is the problem
I don’t know how to get the nonce
@storm apex this is from my A13 blob
all I have to do is set my generator in odyssey to the one i saved my blobs with right?
@storm apex
@dull swallow if I find that in my blob do I use that
no u use joe mom
do i have to worry about an ap nonce?
it passes on the validity checker
xs max
Tbh, I've never used an ap nonce blob
I have
anyone know if it’s possible for a precompiled FR for linux to exist in the future? or is there a reason why it cant?
im having trouble compiling it myself (half the dependencies seem to be having issue installing...)
@storm apex thats all?
@trim vigil preconpiled fr, yes..
I've even restored without a jailbreak, eg: I froze my nonce with igetnonce
@storm apex
Remember the days when the nonce changed to 0x111 and ppl were freaking out
soooooo
ok thanks
Ok
the nonce was the old one because of 5s bug
In my blob it says the generator
But In uncover it says the 0x11111111 thing
That's fine
Can't wait for 11 to gain otara1n
@storm apex which one I use
@hearty forge the blob is the digitally signed official one
What that mean
The reason why it says 0x111 is because that's the nonce you had when you updated
@valid adder i dare you to change FDR to "something's wrong boi"
Ok
gm hotties
is there some way I can install all these in one go or do I have to go one-by-one?
@storm apex does changing the generator in odyssey work right away or do u have to reboot and re jb
okay i’m using dimentio, still need to reboot and re jb?
how
but as long as i re jb i can set the nonce
so it’s not an issue
and the same applies for when you save blobs, apart from going into recovery
the last time i was in recovery was when i saved my 14.3 blobs
the next time i’m going into recovery is when i use FR
so apnonce won’t change
you can use that to verify nonce in blobs
no
to verify that if you saved a blob for x nonce
that blob contains x nonce
adam tested it with my weird A12+ blob and apparently it is valid
i don't know why the fuck there's a generator in it
but he did save it for that apnonce
oh i wanna test a blob
can anyone help me with compiling this thing?
when i try to install the dependencies im getting issues after the “./autogen.sh” part
(“syntax error near unexpected token ‘libplist,’” even though I already installed libplist...)
verifying a generator equals an apnonce is impossible without having the device anyways
on A12+
true
steal iOS source code
i used system info to save it
could be something with that ?
r
anyone can help with this? (ive been trying for like 8h to make this work by now so help is really appreciated...)
importing multiple modules in one line is
in my personal opinion
wait
is that gonna become the new n
i take it back no ban
nothing was said
that late?
jesus y'all just don't care
wonder if the generator in my blobs will work to restore?
we been knew
@storm apex im having trouble with teh last step
i forgot why i wrote half of these scripts
@shy magnet I install jailbreak bootstrap as a git repo
my rootfs was git
when i run this in terminal
git reset bootstrap
that
how do you figure out the generator for A12+
bash ./futurerestore -t blob.shsh2 -s sep.im4p -m BuildManifest.plist -b baseband.bbfw -p BuildManifest.plist -d target.ipsw
unless you want to have some fun bruteforcing
it says
a12 good luck not happening
lol
You may need to install pkg-config
do i have to cd into teh directory
I feel really dumb asking this, but after you run a git clone what do you do after that?
homie is still on step 2
well yeah but futurerestore says to "make sure these are installed", and cloning something doesn't really feel like I've installed something
ddos 127.0.0.1
BUT I'll assume I'm on the right track so I'll continue 
''' e '''
how do i do the thing
whatever
ok so
this is what it gives me Macs-Mac-mini:~ macuser$ cd ~/Desktop/restore
Macs-Mac-mini:restore macuser$ ./futurerestore -t blob.shsh2 -s sep.im4p -m BuildManifest.plist -b baseband.bbfw -p BuildManifest.plist -d target.ipsw
-bash: ./futurerestore: No such file or directory
Macs-Mac-mini:restore macuser$
so... I just run this and it'll do everything for me?
no I'm just following the instructions on the github 
I thought you needed to do all this to use futurerestore
thank you so much oh my god this finally worked ive been trying for hours......
to futurerestore
ok
uh
it still dont work
can u get in vc and i can screenshare
@storm apex 
capt
@storm apex do i put the futurerestore in the same folder with the other stuff
my blobs are confusing me
ok
just run the command straight again
ok
exception
apnonce doesnt match apticket nonce
what now
ye
ye
should i try the different boot nonce
ok
but
i cant really get my device out of recovery mode
each time it just goes back
but doesnt he have A12
and there shouldnt be gens in shsh files on A12+
and mine is somehow valid
normalize ddosing your home IP
@hearty forge what did you use to save blobs
system info
i think the gen in blobs has to be something with system info
@storm apex it is
If I'm on ios 12.4 and I want to futurerestore to 14.3 will I have to update to 14.4 first, then go to 14.3?
true
true
system info puts gens in blobs
fuck u got me
when i tried to futurerestore it said no such file or directory
no fucking shit lmao /\/
rename the file to futurerestore
i did
u have to cd into it
./ means current directory, so if you aren't currently cd'ed into the dir with fr, it won't be able to run it lol @exotic spire
Love it when you rm -rf / .bootstrapped then wonder why / is gone..
@hearty forge futurerestore --exit-recovery
cant you hard reset out of recov?
@valid adder how do i fix this. I have all the files in the restore folder
what does cd mean
Compact Disc
new to mac
Who's Josh
not a mac specific thing
type cd then space then drag the folder into terminal then press enter @exotic spire
joe mom
thanks
Let's let'em figure out the magic of drag and drop into terminal
wait thats a thing @vivid nova
also have them figure out they can up arrow instead of retyping it
Demote this noob and they'll be less green
Let's also let em figure out the power of dictation by pressing FN twice
Hackinbitch

@storm apex the restore didnt work. Took me back to recovery mode
anything i can try
I have no reason to use sur
this is a good sign for dfu mode?
xs max
Honestly it's a great feature when everyone around you shuts up
@exotic spire that gives us no context
going to 14.3r1
It's a good sign that Apple knows what you're up to

Something happened boi
xd
how to dfu iphone xr in recovery mode
If not; just "bruh" it
How to enter DFU mode or enter Recovery Mode on each device
I swear if fdr doesn't get changed to bruh
i picket the right one
im confused
Just bruh would suffice
this happened to my friends iphone 7



