#futurerestore-help
1 messages Ā· Page 13 of 1
@storm apex from 14.1 to 14.0.1
to test the new version
did u test it
can u please share it
i cannot find a link to download
please guide me
yes but its not compiled
i donno how to compile
need help in that
just need some help from you in compiling
will appreciate that
please
@rustic blaze if you're on 14.1, stay, you're golden
but still i would like to compile it
make [2] : *** no rule to make target 'all' Stop
get this error while compiling futurerestore
any clues
bruh...
i need maybe some help or clarification because i never did something like this before. i got my iphone8 on 13.5 odysseyra1ned which works just perfectly. i saved blobs thu system info tweak. once that there is a jailbreak for just 14.1 out there and i decide to go for it - what are the steps to take. last time i did sth with shsh blobs was at the time of tinyumbrella š and with tinytss things were easy
the things what i dont get is the SEP/Baseband stuff. isnt it possible to upgrade to 14.1 and upgrade SEP and Baseband too like a normal upgrade?
If and when there is a 14.1 jailbreak, if 14.1 isnāt signed and 14.2 still is you would have to go to that. iirc 14.2 SEP and BB is no issue when going to 14.1 from it. Futurerestore has been updated for 14.
make [2] : *** no rule to make target 'all' Stop
get this error while compiling futurerestore
any clues
If and when there is a 14.1 jailbreak, if 14.1 isnāt signed and 14.2 still is you would have to go to that. iirc 14.2 SEP and BB is no issue when going to 14.1 from it. Futurerestore has been updated for 14.
@Rick.#7777 thanks for clarify
Is there a nonce setter for iOS 14 a12
Also do u need a jailbreakable firmware to use futurerestore? Thanks
Ok ty
So they just released checkra1n for ios 14, im still on 13.6.1, i dont want to update yet because of tweak compatibility, but i know apple will stop signing 14.1 soon and i dont want to update to 14.2 because of all the kernel patches. i do want to update to 14 soon, i dont like being on an older version. i have blobs for 14.1, and im currently jailbroken with checkra1n, so i have some questions.
- can i fr later with 14.1 blobs in case i want to stay on 13.6.1
- is it better to update to 14.1 now (losing most of my tweaks) and stay on there
I'd stay on 13 for as long as possible
and depending on what device you have for Q1, yes
ālosing most of my tweaksā that sentence keeps me on 12.4 (6s)š„ø
Can I use futurerestore to directly update from 13.5 to 14.1 when 14.1 is unsigned?
okay thanks š
How would u go about checking if sep and baseband is compatible
Website for seeing if the latest version's SEP is compatible with a specified target version
hmm idk if this is right channel but asking if anyone know a proper way of doing it. I have XR running 14.2 and i have iOS 13.5 blob saved, is it still downgradable ? idc about not being able to restore my data i just want to downgrade to 13.5
no
Anyone around to help me for a rather quick question?
how do i downgrade ipod touch to ios 13.4.1 from ios 14.2 or ios 12.1.4 or 12.4 from ios 12.4.4? I have an iPod touch 6th and 7th gen. 6th gen is on ios 12.4.4 and the 7th gen is on ios 14.2
Anyone around to help me for a rather quick question?
@celest basalt sure?
how do i downgrade ipod touch to ios 13.4.1 from ios 14.2 or ios 12.1.4 or 12.4 from ios 12.4.4? I have an iPod touch 6th and 7th gen. 6th gen is on ios 12.4.4 and the 7th gen is on ios 14.2
@ancient yew the new futurerestore (release coming soon) could downgrade a touch from 14.x to 13.4
14.2 SEP is compatible with 13.4, right? based on the latest pinned message. Just baseband isnāt and iPods donāt have cellular so they donāt need baseband so theoretically, I can downgrade right now?
this says otherwise
thanks i made a typo i corrected myself
ok
Im trying to downgrade from 14.1 to 13.5 with my 13.5 blob. could someone give me the right command for futurerestore cause every time is says sep isnt signed
Im on windows
I can also use mac if needed
Iphone7
Global, 32gb
Why
Checkra1n works on ios 14 now
What versions above 13.5 have compatible basebands then
Is 14.0 baseband compatible with 13.5?
Crap
no
@storm apex so whatās the point of saving ios 14.1 blobs if am in 13.5? Sorry am also confused about blobs
@tough crater saving 14.1 blobs allows you to downgrade from the latest (14.2) given that the latest is no good and another jailbreak releases for the lowered versions
do you need the 187 futurerestore guild to downgrade 14.1 to 13.7?
for wifi only devices
am having error 44 on futurerestore :"IM4M isn't valid for any restore with that BuildManifest" , any ideas ?
Hello, can someone help on a tiny question ?
If I have an iPhone 6S on iOS 9, can I update it to iOS 13.5 instead of the latest iOS 14 ?
you should always use the latest version
@storm apex where do I download that
its alr compiled?
Futurerestore guides: [On Discord](#futurerestore-help message) and on GitHub and on Google Docs
@storm apex ok got i think i was using the same file for option -m and -b
any tips to run futurerestore on catalina ?
Futurerestore guides: [On Discord](#futurerestore-help message) and on GitHub Gist and on Google Docs. Download link
mmh let me try to reinstall my pid get killed everytime
didnt someone say, that FR is ābrokeā on ios 14
for which guilds is that
like is that for every FR version
so no downgrading to ios 13, even with wifi only devices, till a patch comes out?
ig
since the new 0.12 checkra1n released
i can jb iOS 14 on my iPad 7
so yeah i could try
well one thing is sure tho, bye bye to iOS 13.6 then
ok progress made, now issue with APNonce :
Found device in Recovery mode
Device already in recovery mode
irecv_event_cb: device 001931e618f34d26 (udid: N/A) connected in Recovery mode
Found device in Recovery mode
Identified device as d10ap, iPhone9,1
Extracting BuildManifest from iPSW
Product version: 13.7
Product build: 17H35 Major: 17
Device supports Image4: true
Got ApNonce from device: 41 5d 66 8e 6c 4d b7 ec 76 88 7f 84 73 73 e7 ff 01 b6 72 2d bb 9c 90 d6 3f bb 29 b0 6d 43 dc 4f
Cleaning up...
[exception]:
what=Device ApNonce does not match APTicket nonce
code=44302353
line=676
file=futurerestore.cpp
commit count=29:
commit sha =2994651a10d8176a298b31e7706b4b6af97975d1:
Done: restoring failed!
i need to make this step from the device itself right ?
but i cant go further the activation
@pseudo stump no signal and made the stupid mistake to do a full reset
iphone connects to wifi but dont want to activate.
tried with 3 (2 different carriers)
looks like the same issue with some iphone 7 with no signal last year but this one is not on the list from apple
oof
yup i'm fckd with it
working on it since couple of hours
might be off topic, but any idea to try to restore to ios13 that was working (or maybe patch the baseband or smthg)
If you patch the baseband.. It won't work @plain sundial
@vivid nova that was my guess, any options ?
If you're trying to get to 13 it ain't gunna happen
lets hope there is gonna be a iOS version, which bb will be compatible with iOS 13....
well the phone was working until i upgrade to ios14 so was guessing something related to ios14, i tried to restore with 14.2 and no more luck
you can restore to iOS 14.1 btw
Why not go to 14.1
I think 14.1 will become unsigned after the event..
i am downloading it now
be fast
let me vheck if i saved iOS 14.1 blobs
@vivid nova on tsssaver, is it normal that i dont have a ānoapnonceā folder for iOS 14.1
while i have one for 14.2
so you think, its just a time based thing?
Yes
well my 14.0 one has that folder not aswell
and i believe its been like over a month...
i have the same as you Barry, 14.2 has both, while 14.1 has only 1
if you've only got one folder, just keep trying periodically
I only had one folder until I redid it, then i got both
just redid it and have now both for 14.1 and 14.2 thx
i might do smthing wrong i still have "Device ApNonce does not match APTicket nonce"
what device is it?
iphone 7
this one MatthewPierson
/
checkm8-nonce-setter?
yes
yes, but bash is preferred
i assume this one is good : Continuing with given SHSH
Please ensure that the file extension is either .shsh or .shsh2 and retry
use the noapnonce folder
yes that's what i did
i had to use the one from 14.1 as 14.2 version was not working
.shsh2
screenshot?
bruh. you don't read, do you
i am quite newbie on this š
yep got it ...
why did you say yes?
i think you put in the 0x... number instead of the shsh file
the .shsh2 file is only if you answer "n"
yep
ok so the result is better when i answer correctly š
Continuing with given SHSH
Please ensure that the file extension is either .shsh or .shsh2 and retry
Exiting...
it's matty's checkm8 nonce setter
it allows users to set the nonce with checkm8-compat devices without jailbreaking
Does it actually set the actual APNonce though?
Or does it just set the generator and thatās where it gets the nonce from
@vivid nova what should be the succesfull output ?
if successful, it tells you to use futurerestore
ok so might not have the right one
*** Matty's Checkm8 APNonce Setter ***
Do you want to input a generator? (y,n)
n
Please drag and drop the SHSH file that you want to downgrade with into this terminal window then press enter
'/Users/pwascheul/Downloads/ios blobs CeĢline/14.1/noapnonce/7091738748603686_iPhone9,1_d10ap_14.1-18A8395_27325c8258be46e69d9ee57fa9a8fbc28b873df434e5e702a8b27999551138ae.shsh2'
Is '/Users/pwascheul/Downloads/ios blobs CeĢline/14.1/noapnonce/7091738748603686_iPhone9,1_d10ap_14.1-18A8395_27325c8258be46e69d9ee57fa9a8fbc28b873df434e5e702a8b27999551138ae.shsh2' the correct location and file name of your SHSH? (y/n)
y
Continuing with given SHSH
Please ensure that the file extension is either .shsh or .shsh2 and retry
Exiting...
are you dragging it in twice?
dragging once and confirming
i'd just answer the first question with "y"
then use 0x1111111111111111
you can do control C on mac to cancel it
Do you want to input a generator? (y,n) so iput yes and the hex code?
yes
and then i drag the shsh2 file
no
Do you want to input a generator? (y,n)
y
Please enter your desiered generator.
0x1111111111111111
Your generator is 0x1111111111111111
0x1111111111111111
/Users/pwascheul/Downloads/checkm8-nonce-setter-master/main.sh: line 82: files/igetnonce: No such file or directory
/Users/pwascheul/Downloads/checkm8-nonce-setter-master/main.sh: line 89: files/igetnonce: No such file or directory
/Users/pwascheul/Downloads/checkm8-nonce-setter-master/main.sh: line 96: files/igetnonce: No such file or directory
/Users/pwascheul/Downloads/checkm8-nonce-setter-master/main.sh: line 103: files/igetnonce: No such file or directory
/Users/pwascheul/Downloads/checkm8-nonce-setter-master/main.sh: line 110: files/igetnonce: No such file or directory
/Users/pwascheul/Downloads/checkm8-nonce-setter-master/main.sh: line 117: files/igetnonce: No such file or directory
/Users/pwascheul/Downloads/checkm8-nonce-setter-master/main.sh: line 123: files/igetnonce: No such file or directory
/Users/pwascheul/Downloads/checkm8-nonce-setter-master/main.sh: line 129: files/igetnonce: No such file or directory
/Users/pwascheul/Downloads/checkm8-nonce-setter-master/main.sh: line 135: files/igetnonce: No such file or directory
/Users/pwascheul/Downloads/checkm8-nonce-setter-master/main.sh: line 141: files/igetnonce: No such file or directory
/Users/pwascheul/Downloads/checkm8-nonce-setter-master/main.sh: line 147: files/igetnonce: No such file or directory
/Users/pwascheul/Downloads/checkm8-nonce-setter-master/main.sh: line 153: files/igetnonce: No such file or directory
Either unsupported device or no device found.
Exiting..
you'll need to compile igetnonce
no, you don't
just cd to the directory @plain sundial
cd /Users/pwascheul/Downloads/checkm8-nonce-setter-master/
then ./main.sh
ok
'⯠cd /Users/pwascheul/Downloads/checkm8-nonce-setter-master
⯠./main.sh
*** Matty's Checkm8 APNonce Setter ***
Do you want to input a generator? (y,n)
y
Please enter your desiered generator.
0x1111111111111111
Your generator is 0x1111111111111111
0x1111111111111111
Either unsupported device or no device found.
Exiting..'
thats an iphone7(9,1) and yes plugged in usb can see it in finder
yup, your device is on there...
could be something wrong with the usb or the connection... try another port
or reboot
ok brb
are you using bash?
yes
ok end of the game for today ... my phone wont start thx@vivid nova for the support might give another try later on
wdym it won't start?
nope black screen no apple logo
hard reboot
Can somebody explain to me what these are/how they work and how somebody can benefit from messing with these ? Just curious on them
But what are they ? Like what are they for
Oh. So itās just for restoring shit essentially
Save SHSH2 is basically the only one you really need to save blobs, as long as the generator is properly set like on the screenshot
APTicket one can be useful to save blobs for an unsigned iOS version you're currently on, but I think those can't be used to restore yet
set nonce can be useful in the future when you need to restore but most jailbreaks set it for you anyway
I uninstalled the āsystem intoā tweak cause it really doesnāt make sense to me lol.
@plain sundial you could just jailbreak with checkra1n and set nonce with nvram
@urban sun i would like but the iphone is stuck at the activation screen so i cant jailbreak it
i would like but the iphone is stuck at the activation screen so i cant jailbreak it
@plain sundial ...really? are you trying to bypass it?
they changed some stuff in ios 14
and that broke some stuff
canāt give you a better explanation
Is it possible to downgrade ios 14.1 to 14 with shsh ?
What is Future Restore
Futurerestore guides: [On Discord](#futurerestore-help message) and on GitHub Gist and on Google Docs. Download link
Ok
dont worry about that (:
a Mac
it works on Windows and Linux though
but doesn't the new one support iOS 14
well tbh unless you're on A8- or so FR is probably kinda useless right now unless you compile the forked version
well, on wifi iPads / iPods it's still useful I guess
s0uthwest futurerestore works up to A12/iOS 13 at least, I think not A13
There is still the idevicerestore bug for ca Apple authorize
Itās a race condition
Baseband related most likely
@storm apex hopefully itās because server load from Big Sur
can i do this without Jailbreak? My whole point is to restore to a jailbreakable version
You need a jailbreak
sure?
Yep
THEN WHATS THE POINT OF IT
Going from one jailbreakable version to another
ex. When/if there's an ios 14 jailbreak for my device, I can upgrade from 13.5 to whatever that version is
Even if that version is unsigned
Assuming I had already saved blobs
WHYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY I WANNA DIE
What device and iOS currently?
Ipad pro 2018 Wifi only 14.1 w/ all blobs from 13.5.1
ah
will this work? https://github.com/zzHAMZAzz/iRestore-Mac-Edition/releases
When waiting for a jailbreak, it's best to stay on the lowest possible version. So just stay on 14.1 for know
futurestore is a command line tool, that just adds a GUI for it
Im stupid cuz i updated from 13.7 thinking i could do without jailbreak
It's functionally the same
It's a key that's randomly generated on boot
It needs to match the same key in the Blob
It won't brick, the device will just refuse to restore
so is there a key setter?
Nonce setters exist, you need a jailbreak for them though
also can i edit the SHSH2 to have the same key?
You can't find out the nonce of your device without a jailbreak
And that wouldn't work regardless
@meager lily whats wrong?
im trying to futurerestore without jailbreak and i guess u cant and i feel like an idiot for updating
also if i try to futurerestore without jailbreak will i have to restore or can i just reboot
if i have blobs for 14.1 and 14.2, do i need to stay jailbreaked to update to those or can i update to latest and then downgrade when the jb is release
if your device is checkra1n compat... you can downgrade @warm meteor
if not, you'll need a jb to the firmware you're on to set the nonce
@meager lily what ipad 2018? got the model?
iPad 8,1
Also, can I use noncereboot on iPadOS 14
One more question, is there a no computer jailbreak downgrade like on 32 bit devices?
how can i change the nonce in a blob fule
file
helo?
Sure?
Can I set the generator without jailbreak?
What bout noncereboot
Can I use it on iOS 14
14.1
oki
cant find the link, my bad
i lost it
is there a nncereboot for iOS 14
oki, but is there noncereboot for ios 14
i know
but
oki, but is there noncereboot for ios 14
thx anyways
okay so uh
im trying this futurerestore --latest-sep --latest-baseband iphonex-14.2.ipsw
and uh
it says missing arguments
oh yea im trying to restore an iphone x to 14.2
no downgrading fuckery here
oh yea im trying to restore an iphone x to 14.2
@rotund owl so why not just restore it normally in itunes?
itās still signed
it keeps rebooting out of DFU
how does it not
i put the iphone into DFU
i restore
it does its thing then when its preparing, the iphone restarts into the recovery mode screen
and im not sure what other arguments futurerestore wants
wait
do i need to give it apticket
@rotund owl what args do you have so far?
futurerestore --latest-sep --latest-baseband iphonex-14.2.ipsw
no downgrading or upgrading fuckery
won't work
do i need to give it apticket?
you need to specify sep and baseband manually
this is the fork that supposedly works on 14
and fixes baseband/sep issues
"supposedly"
-s /path to sep.im4p -b /path to baseband.bbfw
it's inside the ipsw
ah lemme extract those then
then you'll need -p /buildmanifest.plist -m /buildmanifest.plist
and -t /path to ticket.shsh2
what vers are you trying to downgrade to?
then use itunes
doesn't work
it's still signed
or use idevicerestore
already tried different ports
if you've got futurerestore compiled... then you can compile idevicerestore
then just idevicerestore /path to ipsw.ipsw
well if you sudo make install you just need to type it in term as-is
screenshot?
bruh
goneā¢ļø
re-compile it
ight where the fuck is futurerestore located imma go look in there
btw... pink background. oof
transparency with blur
bigger oof
yeah, you don't have it
do the one i just posted
ok, autogen
no
looks like no errors
./autogen
what was the output?
the script went fine
no errors
-------------------------------------------
Install prefix: .........: /usr/local
USB backend: ............: IOKit
Now type 'make' to build libirecovery 1.0.1,
and then 'make install' for installation.
but it's telling you libirecovery (vers?) . doesn't exist
about?
cool
and uh
iBoot build-version=iBoot-6723.42.3
iBoot build-style=RELEASE
Sending RestoreLogo...
Extracting applelogo@3x~iphone.im4p...
Personalizing IMG4 component RestoreLogo...
Sending RestoreLogo (20400 bytes)...
Extracting adc-nike-d22.im4p...
Personalizing IMG4 component ISP...
Sending ISP (13269708 bytes)...
Extracting 018-01042-004.dmg.trustcache...
Personalizing IMG4 component RestoreTrustCache...
Sending RestoreTrustCache (11975 bytes)...
ramdisk-size=0x20000000
Extracting 018-01042-004.dmg...
Personalizing IMG4 component RestoreRamDisk...
Sending RestoreRamDisk (103845903 bytes)...
Extracting DeviceTree.d221ap.im4p...
Personalizing IMG4 component RestoreDeviceTree...
Sending RestoreDeviceTree (40412 bytes)...
Extracting kernelcache.release.iphone10b...
Personalizing IMG4 component RestoreKernelCache...
Sending RestoreKernelCache (14208892 bytes)...
About to restore device...
Waiting for device...```
hangs here
and my iphone is on the recovery mode screen
try again
ight
im curious.. how do you do DFU?
hold volume down and power for 4 sec
and what device is it?
then let go of power and keep holding vol down
it sent ibec
now its back on
sending restoreramdisk
what device?
bruh...
and now back to recovery mode screen
stop copy/pasting
dfu mode doesnt have apple logo
yea thats what i did
then it got the apple logo after starting the restore
is it i7?
iphone x
you're doing dfu wrong
iPhone10,6
d221ap
ok how do i get into dfu
finder sees it and the screen is off when i do my dfu
it'll work
what vers of idevicerestore do you have?
lemme check
idevicerestore -v
thats not a valid arg
it should be
you've got an old one
fucking hell
at this point ive tried itunes restoring on three pcs
one mac
DFU restoring
recovery mode restoring
the filesystem on it is fucked
cant boot to an OS
git clone --recursive https://github.com/libimobiledevice/idevicerestore.git
yes
ok its going
-------------------------------------------
Install prefix: .........: /usr/local
Now type 'make' to build idevicerestore 1.0.1,
and then 'make install' for installation.
thatsniceguy@SakuraBlossom idevicerestore %
we good now?
ye rip
make
ok its done
make install
okay, use it
ok
sending ibec
sending shit
sending restorekernel cache
device failed to enter restore mode
and im pretty damn sure that usbmuxd is running
reboot the mac and while its rebooting.. try DFU
then release power and keep volume down held
if apple logo pops back on... retry
time it where you do it a second later or immediately
if not, wait another second
don't need -e
i need to erase
okay, up to you
ERROR: Device failed to enter restore mode again
just rebooted back to recovery
after Waiting for device to enter restore mode
i'd try futurerestore --exit-recovery
itll reboot back into it
because there's a . broken FS
but ok
Version: 74c065565e64e3b447f73bcd9087ed78080193ec - 187
Odysseus support: no
Exiting to recovery mode
INFO: device serial number is [REDACTED]
[INFO] 64-bit device detected
futurerestore init done
futurerestore: failed with exception:
[exception]:
what=Could not connect to device in recovery mode.
code=10813457
line=165
file=futurerestore.cpp
commit count=33:
commit sha =f571dc2949c4ca4c9b5db72fff35878717e5ce0b:
at this point imma just take the damn phone to apple
ive tried restoring it with 4 different cables
3 pcs
in dfu and in recovery
bruh
at this point sure
dfu is burnt into securerom anyway
cant get much worse
wait
u talkin bout
oh fuck
i mean
i mean i can reboot into windows to try since uhhh
i don't recommend it.. but if it's the only way
gross
ok fuck it at this point i dont care if xi xinping can see my hentai
time for
spyware
like my apple tv?
just.. be careful
bruh
fuck I already booted into windows
How is it gonna exit recovery
The phone boots into recovery if you turn it on
Normally
The FS is gone
'tis because auto-boot is set to false
this sets it to true
disabling auto-boot is apples way of restoring
it has like fifty failed flashes on it but Iāll try if China software fails I think
again.. be careful
no... other stuff
ah yes
now the phone is bootlooping
amazing
yea it bootloops if it doesnāt boot into recovery
Tim apple
China software is now trying to restore the IPSW
hmm
irecovery -n
back to macOS to try this since China software failed as expected
if that failed... i call hardware damage
Itās probably hardware damage
Idk what this phone has been through
But uh the previous owner says that it almost never worked right
Phone is in perfect physical condition tho
sure
nah it just rebooted into recovery
I think this phone might be fucked
good thing I got this for free
how'd you get it for free?
previous owner said he had nothing but problems
bruh.. you got scammed
itd sometimes work or randomly bootloop he said
damn Iām glad I didnāt pay money for this
hardware issues 100%
shits fuckinf š ±ļøroke
prolly did a youtube drop test
might just swap the mobo from my main iPhone X into that iPhone X
And swap over my Face ID
bad idea
unless you have a programmer and a set of skills.. you'll end up sending it to the grave
Imma try swapping the dock connector tho
I have a spare
lol programmer for what
Anything you would want to flash is encrypted or incredibly annoying to get to
you need a programmer so ios doesn't complain about illegitimacy
display programmer?
cuz like
on the X not much is paired aside from Face ID and display True Tone
battery and logic board is too
I havenāt noticed it for some reason then
My main x has a replacement battery
And itās on 14.2
display is orig tho
If I have an iPhone 8 running iOS 13.0, can i still save blobs, or can I only save blobs when that version is signed?
aww man
should i update it to 14.2 or stay at 13.0
how do i save blobs? on tss blobsaver it saves only 14.2
ok
š§æ
Anyone know if there is a Linux version of the working iOS 14 FR version
shshdump exists
@full osprey i have it compiled on my pc
packed into a nice tar file with all dependencies
I'll be uploading that soon
Yeah, still wip windows and mac vers works
Windows is putting up a fight
Need time for that
But Linux should work like bootra1n
Wym? Bootable FR? 
Yes
Pog u
Any info on error 11?
Screenshot?
Looks like bad network, what device/ios are you going to?
iPad 7
When I use latest for sep instead of manual it said something about failing to get SEP location
I think
Or download sep location
Yeah.. Need to specify it
In the image above it was
Try it again
Are you using noapnonce?
Had the wrong generator set
Well I thought
Lol now it got further but failed with the same error
Now it green screens then fails
These are blobs saved with system info
Iām manually specifying sep and no baseband
Itās an WiFi iPad
I tried system info and dimentio
Are you on 13.7?
@storm apex please also release a error tracker for the above code

Here.. I'll test it out
How to compile img4tool
Due to a new watch SE in hand it looks like I will have to futurerestore to 14.1. If I compile the new version am I still going to lose faceID?
no
I am not able to compile the marijuanARM futurerestore yet. Here is the first error when trying to sudo make install libinsn on High Sierra.
I did, still getting the same result after trying once again.
Is there a good tutorial for how to use future restore on an iphone x running 14.2? I have the blobs for 13.5 and i want to downgrade. The iphone x had no faceid nor cellular already, and therefore i do not care if it breaks those. It is jailbroken with checkra1n, but is so flaky that i would rather it be on 13.5
how about to 13.7 or 14.0? I have blobs for both as well
Alright. Well how would I go about doing that. Is there a guide anywhere i can follow as not to bother you?
Futurerestore allows you to upgrade/downgrade to unsigned iOS versions if you meet certain requirements. [Tutorial on Discord](#futurerestore-help message) and tutorial on GitHub
thank you! š
So I see in the tutorial it says that project.zip does not support ios 14. does this hold true or is it now possible to downgrade to ios 14.0?
hey! The libinsn package will not install on my Mac. I am using MacOS Mojave on MacBook 11,1. I am using the bash shell. autogen.sh completes successfully, but the makefile fails on installation
What other information do you need to help diagnose this? I am familiar with Unix, so I know my way around the command line.
rm -rf ./libinsn
git clone --recursive https://github.com/tihmstar/libinsn.git
cd ./libinsn
./autogen.sh
make
sudo make install
@fervent garnet
@terse knoll one big mistake to point out... ```Configuration for libinsn-32:
install prefix ..........: /usr/local
compiler ................: gcc
Now type 'make' to build libinsn-32,
and then 'make install' for installation.
iMac:libinsn Rick$ sudo make install```
it's make then sudo make install
do you have the log?
sure. would pastebin be the best way to get it to you?
sure
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
you're missing the above /Library/Developer/CommandLineTools/usr/bin/make all-recursive Making all in libinsn
sorry? not sure what that means?
Did I not paste the whole thing?
Oh do you want the whole log from the clone onwards?
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
try ./autogen.sh && ./configure && make clean
k so that all works but once again if i try make or make install after I still error out
do you have brew installed?
yes i do
here's what got me to do it successfully: http://thedarkenteztaz.blogspot.com/2018/02/compile-futurerestore-libipatcher.html
i wouldn't use mojave
but a vm of high sierra
does this 2018 tutorial work for downgrading ios 14.2 to 14.0?
ok, you mentioned that you need more arguments - what would those be? I am looped at this:
ok, you mentioned that you need more arguments - what would those be? I am looped at this:
@fervent garnet./futurerestore -t blob.shsh2 -s sep.im4p -m BuildManifest.plist -b baseband.bbfw -p BuildManifest.plist -d target.ipsw
yep - thats what i used. hmmmm
did you set the nonce?
I did, yes. It eventually failed and i am now restoring my phone since it wouldnt boot
you don't need to restore
I mean after the phone errored, the OS was corrupted and I could not get back into iOS to reset the noance
if its stuck on the recovery screen.. just use futurerestore --exit-recovery
it would bootloop
set the nonce with this https://github.com/MatthewPierson/checkm8-nonce-setter.git
doesnt seem to work with ios 14
it does
I am running as root and am getting permission denied on it hmmm
yes i am in DFU mode
yep. specified -r since it was a directory
try sudo ./main.sh
was running as guid 0 already
now it is stuck at your generator is: 0x1111111111111111 and it won't do anything else. I rm -rf'ed it and recloned it and its still not working
cant even get the error code. just frozen
because the folder was called ipwndufuA11 or something
also i deleted it to try again
ohh copy it into the previous directory maybe? hol up
ahhhh im about to reover my phone and do it tomorrow its like 3:30 am
make sure you cd into the checkm8-nonce-setter prior
i did
but yeah, you're close
expect a lot of those errors
it took me an hour to get the 7 set
yeah that looks like an error in the .py script itself - i think i am going to set the noance from newTerm
shit
whelp
alright - what is your timezone? my brain is cooked lmfao
just ping
sounds good. Thanks for all of the help tonight
no worries
Yes thank you all, will get back to it after work today.
Checkm8 nonce setter might help
@vivid nova Right back at it. I have done some research and cleared some of my previous error messages, but I am stuck here:
for context if anyone else wants to take a peek I am trying to use checkm8-nonce-setter to set the noance on an iPhone 10,6 that used to run iOS 14.2 and is now stuck in a recovery mode bootloop. I have googled that error code and it (obv) has to do with the MacOS USB driver. I thought it might be because I am on Mojave, so I tried again in a Big Sur VM, but even though Finder could detect my phone in DFU mode, checkm8-nonce-setter could not
Update on my progress: After the first few errors about SPUSBDevice, the script starts writing out errors about being denied permission to ./ipwndfu - even though I chmod 7777 ./ipwndfu I still got the error. I enabled the root account on my mac and logged in with that to check, but alas, same permission denied to ./ipwndfu. I also thought root might fix the SPUSBDevice error, but no. Same errors.
root account is nice though since there are no dumb security popups. I should use this full time (this is a joke)
Screw this I think I am just going to wait for JTV to get online since I think they said they have an idea
Also quick dumb question for anyone - the iOS 14.2 SEP is compatible with iOS 13.5 but the baseband is not. Is there a way to downgrade an iPhone X and disable the baseband (make it a wifi only device) or is the baseband a critical part of the downgrade process?
critical afaik
thank you
This time I started from the beginning on a Big Sur Macbook Air. Still getting the same error when I get to the libisn commands.
@terse knoll I was having that too, but then I used http://thedarkenteztaz.blogspot.com/2018/02/compile-futurerestore-libipatcher.html tutorial (JTV gave it to me) and it worked
ok thanks will try that next
Alright, update for whenever JTV gets online, I narrowed the issue down from the actual checkm8-nonce-setter to ipwndfu. It doesnāt spit out any error codes so i am going to try on linux in a bit here
@vivid nova I reverse engineered (not hard its python) the checkm8-nonce-setter and got into pwndfu mode. I set the nonce and started future restore, but now futurerestore is just looping a timeout
Yo anyone who can help me get out of this error message above that would be amazing - should I try to futurerestore on linux? because on MacOS it just gets here and dies
the apple bar is at exactly 50% and frozen - hasnt moved in forever
kk so its been stuck in this timeout loop for 30 mins. I think I am just going to leave it for now then recompile futurerestore for linux cause screw this
I've finally got FR 187 compiled on High Sierra! Am I ok to use the latest commands for basband and sep? Do i need any other files besides the ipsw and blob?
yeah i think A11 must have an issue with futurerestore. ugh - might be destined to stay on 14.2
do you know anyone whoās gotten a successful 14.2 to 14.0 on A11?
I do not, I've set my nonce with dimento on 13.5 so maybe i wont have same issue?
i donāt think you will - JTV said that Apple patched dimentio in 13.7
You just have to be extra careful because if you screw up like i have three times you will be forced onto ios 14.2
for sure normally I would use FR after it's compiled so I am early to the party this round. Last time I used it I only needed blob and ipsw. used latest commands for sep and basband
i think the github repo still has a compiled version that works for ios 13 tho
i got a new SE watch so im actually going to 14.1 to stay there
First try sent me to recovery mode and stopped. So I sent the same command again and it worked. I think where I got stuck compiling was with libimobiledevice. After trying several different methods I was able to get version 187 compiled.
Looks like imma have to do this on mac, cannot for the life of me get linux to work
wtf is Segmentation fault (core dumped)
tried to access memory it isnt allowed to access
I'd have to look into that.. But perhaps debian?
Bet
I should make a repo for futurerestore
It gotta be a easier way to build on Linux lol
It's not about how you compile it, but what the dependencies are compatible on
I've noticed you can build it but if they're not compatible, FR will just quit
I couldāve just used mac but iām a total noob with linux so anything with it is practice
Mac is way easier imo
Linux is like a police officer compared to mac being the mall security guard
Imma give linux one more shot, otherwise ill just use mac in the morning
Don't waste your time with Linux
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
Does futurerestor work on macos 10.10
- Edited 2020/11/24 to fix Segmentation fault!
You must have at least basic Terminal knowledge before proceeding
Ubuntu 20.04 and 20.10 prerequisites:
sudo apt install libtool automake g++ python-dev libzip-dev libcurl4-openssl-dev cmake libssl-dev libusb-1.0-0-dev libreadline-dev libbz2-dev libpng-dev git
export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:/usr/lib/x86_64-linux-gnu/pkgconfig
Ubuntu 20.04 only prerequisites:
git clone https://github.com/libimobiledevice/libplist
git clone https://github.com/libimobiledevice/libusbmuxd
git clone https://github.com/libimobiledevice/libimobiledevice
cd libplist && ./autogen.sh && make && sudo make install && cd ..
cd libusbmuxd && ./autogen.sh && make && sudo make install && cd ..
cd libimobiledevice && ./autogen.sh && make && sudo make install && cd ..
Ubuntu 20.10 only prerequisites:
sudo apt install libimobiledevice-dev
Compiling (reverted libgeneral and img4tool in my fork for now):
git clone https://github.com/lzfse/lzfse
git clone https://github.com/libimobiledevice/libirecovery
git clone https://github.com/LukeZGD/libgeneral
git clone https://github.com/LukeZGD/libfragmentzip
git clone https://github.com/LukeZGD/img4tool
git clone --recursive https://github.com/marijuanARM/futurerestore
cd lzfse && make && sudo make install && cd ..
cd libirecovery && ./autogen.sh && make && sudo make install && cd ..
cd libgeneral && ./autogen.sh && make && sudo make install && cd ..
cd libfragmentzip && ./autogen.sh && make && sudo make install && cd ..
cd img4tool && ./autogen.sh && make && sudo make install && cd ..
Modify source and compile futurerestore:
cd futurerestore/external/idevicerestore
wget https://gist.github.com/LukeZGD/a4cf72c23924d88af4a53a52870d3b9d/raw/7038d8c8ffe287d9ebe2bef2d8fa5bfa799c1c1a/idevicerestore.patch
git apply idevicerestore.patch
cd ../..
./autogen.sh && make && sudo make install && cd ..
Launching futurerestore after compiling: sudo LD_LIBRARY_PATH=/usr/local/lib futurerestore <arguments>
Pretty hacky but this is what works for me in Ubuntu
Got a lot of the info from Merculous: https://merculous.github.io/futurerestore/linux/
I didn't include libipatcher though
Fr 187 works on ubuntu linux here
Which distro?
Ok nvm.
does futurerestore can go to ios 13.7 with shsh and checkra1N ,
not on iPhone ?
why
baseband
and 14.1 to 14.0 ?
yes
But going lower than 14.1 will bring back more bugs @celest basalt
okay
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
update = more security
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
perhaps, but not worth forking over jb
One message removed from a suspended account.
Can someone tell me why i canāt compile libcrippy?
I'd like to updatee my phone from iOS 13.5 to 13.7, but I see different posts saying that the SEP may or may not be compatible. Am I good to go for updating?
I'd like to updatee my phone from iOS 13.5 to 13.7, but I see different posts saying that the SEP may or may not be compatible. Am I good to go for updating?
@dry shadow no
If you're on 13.7 or lower; stay. If you try to update from anywhere to 13.7, Futurerestore will fail and you'll be forced to update to the latest.
umm, how can I downgrade from 12.4.9 to 12.4.8?
cause jailbreal keeps crashing on 12.4.9 on installing tweakss
any help?
MUCH NEEDED!!
iphone 6 running 12.4.9
A1586
question
can i futurerestore to 13.7 now if im on 13.5
i have blobs
ok nvm
i cant read
can i fr to 13.6 then
???
Can someone help me im kinda new to JB my "problem" is im on IOS 12.1.4 jailbroken with unc0ver since i didnt update to 13.5 on time and didnt save any blobs i stayed on IOS 12 and always saved blobs now my question is can i update to 13.7 with the blobs and stuff? i saved every blob after ios 13.5.1
if you've saved blobs...
no
can i futurerestore to any version from 13.5 to 13.7 with blobs
or is that like broken now
bruh
this was your Q: can i futurerestore to any version from 13.5 to 13.7 with blobs
i have 4 blob files savedd
So what is my next plan? what should i do i cant stay on IOS 12.1.4 forever i cant load IOS 13 apps is the only method to upgrade to IOS 14?
I don't know which one's gonna workk
0 context
updating via iphone 7 won't matter. You've got checkra1n
any helppp?
??
ya 4 of them
but you've provided 0 details
but I can't jailbreak on current 12.4.9 it keeps crashing on installing tweakss
details as in?
iphone 6
A1586
ios 12.4.9
what jb are you using?
checkra1n jailbreaks but crashes on installing any tweakk
gotta restore the whole thing and rejailbreak
still won't work
did that 3+ times
this is the 4th time it crashed and I won't reset nowš
can't rejailbreak it keeps failing som erroe -63 or -69 idk
What do you mean with checkra1n that i can JB any version or that i can update to any? prob JB i think
yes
can i post to checkra1n and ask what i should do or is this crossposting?
what is the error
okay so when i install tweaks, restart springboard, checkra1n app gets deleted, leaves the cydia app crashing and can't uninstall it or rejailbreak
are you able to screen record your installed tweaks?
not right now as it is in crashed state
left the cydia app crashing
uninstallable
ok, you've said that like 4 times
i can screen record the crashing thingšš
screenrecord your home screen, settings etc
just the tweaks that are listed
i can some how see the list in recents some of them
but i installed newterm only
last time it crashed on installing noctis 12
and before that it crashed on installing widget tweak i guess HW Widgets
how much was noctis 12?
how much?
yes
it just crashed on restarting springboard


