#nathanlr
1 messages · Page 94 of 1
And don‘t really know how
But if it needs DFU mode I can‘t as like I said I can‘t enter DFU mode anymore
How would I know
It just simply doesn‘t let me
Been sayin that since a week after I got it lol
My dad bought it for me used, they thought it had 64gb of space when it only had 32gb but they only learned later when I complained, and the battery health was at like 80-85% when I got it I bet
It at 69% rn 
Best method windows 11 iPad air 2 14.8 also for Odysseyra1n if this correct place
Yes
Does it matter if it's huge lol
Yup
Im looking at a guide but not sure it's updated or correct
iOS cfw site or something
Ahh ok
So guide I'm looking at is correct saying same thing
Ty
@proud swan After installing the powerselector which is the reboot which doesnt remove the jailbreak there is power off/reboot/userspace reboot/ldrestart/safe mode/ulcache/respring. And how do i put powerselector into the control centre
Assuming you have ccsupport installed with it.. just add it in control center settings. And you can customize what options show there.
is ccsupport in the same repo
no but I think it gets installed with the tweak anyway
it is just checked
there is a tick next to ccsupport
okay i managed to add it to the control center @proud swan so which one is the reboot that doesnt remove the jailbreak reboot/ldrestart/safe mode/respring/guicache
userspace reboot
okay so the one that says reboot in the control center thats the one
yes its not showing in any of the control centre options
only within the powerselector how do i add it?
where would i find the tweak settings @proud swan i went to settings and control centre
on your phone probably scroll down in settings app til you see PowerSelector
I use shuffle tweak which moves the location of tweak settings
but anyway you can get to PowerSelector settings without it just less convenient
Ok so I'm not the smartest at this stuff but I can't JB my iPad air 2 14.8
It appears you are asking if you can jailbreak your device, you can find out that information by using /canijailbreak or in the "Get Started" section of ios.cfw.guide.
Getting all different kinds of errors
Also I know it's good wire and such because use to use checkrain long ago
Can delay updating with the supervised message in settings be blocking connection?
What are you using to jb?
Oddesyn1x
Windows 11
My iPad is in supervised mode
Wondering if that's the problem
@copper cedar Are you amd?
Nope
Intelligent i9 or something
Intell
I disabled secure boot and stuff
No passcode
Also tried multiple PC/laptop lol
Wym
I used the old way with mybloxx
Was going to use uc
But that don't support this device
So I couldn't remove supervised mode
Or I missed a step
Before updating
Think earse all settings and data will wipe that?
I've done the rootfs before updating so should not brick
Yeah erase all settings will prob remove that
Ok that's what I'll do meh worst that happen makes me get a pro
there’s a method to supervise and unsupervise without jailbreak fyi
Wish I knew that before lol
I just earased all settings and data
And started fresh no backup and worked right away
So supervised was blocking connection somehow
that seems unlikely..
part of the ota process is supervising phone it shouldn't affect checkra1n
it was probably something else
Dunno but data erase did work now jailbroken
Without jailbreak you have to erase all content and settings if you un supervise or supervise
oh yeah maybe I forget the steps never tried it
yeah could've been countless other things who knows did you do rootfs beforehand
is checkra1n supposed to work on an iPhone X on iOS 14.6? I looked at the the subreddit spreadsheet and it said it did, but it doesn't work in the app. Maybe I need to change settings or download a different update?
make sure you
disable your passcode
enable untested versions in the settings
enable skip a11 bpr check
the checkra1n app i’d assume
like the checkra1n program
I thought he meant the Cydia loader app
it’s not officially supported but it works just need to enable it
thank you guys! got it to work 🙂
Any checkrain dongles or not possible?
i mean you can do it on raspberry pi's cant you
Seems for some like normal checkrain
Yes I think
If jailbreak a a11 phone need to do what before jailbreak?
Disable passcode + touch id/face id
ok thx for helping
just continue?
So if I install tweaks will work? Cause last time I’m in iOS 15,so I’m not sure
You’re on 14.8.1 right?
Yes
Thx for helping
When will checkra1n update to ios 15.1?
It appears you are asking about future jailbreaks. Nobody knows when a jailbreak will be released, but you can subscribe to notifications about releases by going to #roles.
Ive noticed after a little while my cydia app does not launch properly and keeps crashing when i tap on it doesnt load anything and checkra1n app disappears even after userspace reboot i have to keep rejailbreaking
any solutions at all
If it crashes on open, you're not jailbroken and would need to rejailbreak. If this happens constantly, you have a bad tweak. You don't really need the checkra1n loader app at all after the first use
Checkra1n is work for every version?
Jailbreak for A7 - A11 devices on iOS/tvOS 12.0-14.x available at https://checkra.in/
Im stuck on the middle bar where it says this is the heap spray
I already restarted
Twice
Error connecting to lockdownd
Unlock your idevice and trust the pc if a popup appears, then disconnect and reconnect the idevice.
iOS not supported or device not supported, but chart says otherwise
Make sure you are using the latest version of checkra1n, and enable allow untested version in the options. A11 users on ios 14+ will also need to enable skip a11 bpr.
Stuck on checking for device, or device won't go info dfu?
Make sure you're using a [usb-a to lightning cable](#bot-commands message) (as well as an adapter if needed). Use a pc with an intel cpu if possible, and don't use a VM.
Just AMD things I guess
Hmm yesterday i jailbreak checkra1n IP 8 ios 14.8 on linux on amd laptop and install usbmuxd helped
amd no
It’s inconsistent
But there’s no amd issue on laptops anymore I don’t think? I haven’t had any for months
It’s mainly desktop CPU’s that will still have issues
Try sudo apt-get install usbmuxd on Debian based distros
Check skip A11 abrb and allow untested ios versions in checkra1n settings
Can someone tell me when chekra1n isnt doing a update ???
we have no idea
Is a future checkra1n activation lock bypass even theoretically possible in 15.2.1? From everything I've read, the chances seem extremely slim that it's ever even going to exist.
It appears you are asking if you can jailbreak your device, you can find out that information by using /canijailbreak or in the "Get Started" section of ios.cfw.guide.
not possible and read the rules please
No Activation Lock bypass discussion. Asking how to do it or posting about it is not allowed. The same goes for anything similar to this subject, such as removing a passcode.
bypasses are dead
just dont buy stolen phones
ez
I found someones phone at a festival, tried everything I possibly could to locate the owner, even took it in to an apple store, posted on message boards and group chats. 🤷♂️ Don't even know what to do with it now
If I take out their SIM and put it in my phone would that give me any information on the owner?
no...
and why are you asking in this channel?
which is a better channel for help with this?
i mean, you could get the owners phone number off it
i mean, yeah
just saying that it's typically icloud or google lol
@glacial bridge try put the sim card in your phone and import sim contacts in Settings > Contacts
you might get some contacts of the person if you're lucky
Thanks, that worked, I got the persons phone number by putting their SIM in my phone, and then calling another phone with it.
Maybe this person got a new phone in the meantime, and I can try to reach them at the same number?
i was thinking about the trying to find their sim card contacts because they might actually know the person and would be able to get you in touch with possibly their new number if they have one
just ask “I believe I found yours or someone you’re related too’s phone, does this person want it back”
^
Importing the contacts didn't come up with anything, I'll have to just keep texting this number I guess, hopefully they get a new phone with the same number
I guess shrug whoever it was lost it at a festival in Mexico at 4AM, and their phone was in Russian so looks like they were traveling internationally, must be a shitshow for them lol. I was hoping to return it in time for it to be useful for them.
Then again, it's an iPhone 12 max pro, probably a russian millionaire.
you'd think a russian millionare would know how to put their iphone in lost mode with contact details
They put it in lost mode, but there weren't any contact details
I checked the SOS medical details too
nothing
its literally right there when youre putting it into lost mode come on
how can you miss the box that lets you fill in contact details
i swear it shouldnt be optional at this point
did you call it?
and yeah the checkra1n team is very against helping people break into stolen/lost phones
also you said it's 12 pro max so it's not compatible with checkra1n anyway lol
probably report it to Apple store I'm sure they could help return it to owner
if anything the carrier could probably help since they’d know who’s registered to that number probably
apple could look up the icloud info presumably
the phone will be registered thru apple
the carrier too i guess but they would be less cooperative I think
Guys I’m facing error 31 in checkra1n while jailbreaking iphone 5s ios 12.5.5
Latest checkra1n with latest ios in ip5s
-31 is exploit failure
reboot and try again
I tried usb bootable, linux mint, odessynyx and checkra1n iso too
Nothing worked
try a different version of checkra1n
it (err 31) is a stage 1 timeout
if i enable usb booting on my chromebook i could install checkn1x right?
but care enough to put it in lost mode 
Yay I‘m jailbroken again
Randomly DFU mode worked again and the -77 code didn‘t come up as well
Wait it did lol but only after finishing the jb tf lol
How to fix everytime I rejailbreak but stuck at white Apple logo?cydia still on home screen
Don't help them they're activation locked
Jailbreak in safe mode
Ok,will try later and thx
Anybody know what this means? Happens every time I try to run/open iCleaner on iOS 14.4.2 i7 checkra1n’d
““objc[88416]: -[__NSCFConstantString _getCString:maxLength:encoding:]: unrecognized selector sent to instance 0x10316c050 (no message forward handler is installed)
Abort trap: 6””
So if i jailbreak with safe mode meants i cant install any tweak?
You most likely have a bad tweak installed, if jailbreak is successful in safe mode
If i jailbreak sucessful in safe mode , i need to uninstall that tweak?
Cause that tweak always make me stuck at respring
Seems straightforward
Yes.
if you're only stuck on respring when not using safe mode it's 100% the bad tweak
Remove ic, delete it’s prefs, reinstall and see if fixes
Is it possible to jailbreak iPhone 8 on 15.1 with jailbreak? According to the website, it's possible, but subreddit spreadsheets tell otherwise
the website hasnt been updated in so long
It may say 12.0 and up but the link right below talks about preliminary support for 14, so even though outdated, it implies 15 isn't supported
Yes,just supported to iOS 14.8.1
Done that already. I’ve exhausted all obvious options. I forgot about Cr4shed though, I’m gonna see if I can get more details that way.
cr4shed bad btw
Always used it over crashreporter
If all fails, remove prefs, restore fs and rejb
Date: 1/19/22, 8:30 AM
Process: iCleaner
Bundle id: com.ivanobilenchi.icleaner
Device: iPhone 7, iOS 14.4.2
Bundle version: 7.9.1
Exception type: EXC_BAD_ACCESS (SIGSEGV)
Exception subtype: KERN_INVALID_ADDRESS: 0x16f32ffe0
Exception codes: 0x0000000000000001, 0x000000016f32ffe0
Culprit: Unknown
VM Protection: 0x16f32ffe0 is not in any region.
Wtf lol
Ikr it’s got me throwed I don’t have a clue why it’s doing this it worked fine a few days ago
I just can choose 3 options,Allow untested ,skip a11 and dark blockchain,if I choose another one will freeze
Open terminal & cd to directory where checkra1n is. Then type
./checkra1n -cVv
Put the device in DFU mode & watch the terminal do it’s thing
That fixed it. 🤷🏽♂️
Probably coz it removed everything related to iCPro
This may be a checkn1x issue
Use https://github.com/raspberryenvoie/odysseyn1x/releases if you aren’t using it
i keep getting this, i took it out, restarted my computer multiple times
idk what i’m doing wrong
You probably wrote the usb incorrectly
it loaded it the first time
but the program didn’t run after it said it would
so i restarted
and now it gives me that error
imma re download checkn1x and try again
Don’t use that
why not?
Odysseyn1x allows you to use checkra1n and Odysseyra1n on Windows computers via live-booting. You will need a USB flash drive or SD card for this.
I don’t know anyone who used either on a chromebook. But if checkn1x worked I don’t see why this won’t
makes sense
thank you
now i cant delete or edit any files on the usb
cant format or delete it either
it’s stuck in read only
Not sure what you did there
odysseyn gives me the same error😕
You wanna pay for that shit 
but you can’t do shit on windows
not easily at least
just wanted to see if it was possible and ended up bricking a usb
Happens more often than you think. You can probably fix it, but it’s gonna take a linux computer to do it 😅
You could probably put that chromebook in dev mode & replace chromeos completely with a custom built Ubuntu or Debian. I had an acer c720 chromebook I did that with. Been a few years though
What kind is it
i’m trying my best to stay away from youtube n shit
Lol i only get indians
@glossy coyote Your best bet is to make a bootable usb of galliumOS^^ & then download the appropriate checkra1n for your architecture & do it that way. I’m not sure about odysseynix or any of those distros & their compatibility with chromebooks
Hi dears
jesus
a chrome book just has normal computer specs doesn’t it?
why wouldn’t it support odyssey
1nx
No way man it’s ARM
not all chromebooks are arm
Most are
Never seen an x86 chromebook. What would be the point .. arm is the only reason they have exceptional battery life. Arm is the future of mobile computing, been saying that long before Apple dropped the M1 on intel’s crusty old 14nm head
Very early chromebooks were intel based
And if any exist today it’s because they have huge batteries
I disagree unless we're talking about the every day person who only needs to browse the internet. For power users, who travel for work. ideally a laptop that can support at least 2 4K monitors while at home, with capability to plug into an eGPU with full native support of it, and be able to handle a gazillion spreadsheets and other things open at the same time.... and the ability to disconnect it all on the fly and take it with you in your bag that doesn't weigh you down, but offers comparitive power and processing on the road........ you need an x86 based processor. i7, i9, Xeon..... Dell's Precision class is a good example of this. Try running 2 4k monitors even with an AMD supported eGPU performing video calls and spreadsheet updates on a current macbook pro. Can't keep up.
A current macbook pro (latest release), can not keep up with 2 4K monitors let alone 3, with full blown multi-tasking going on in the background. I've had a billion stutters, lock ups, freezes, you name it. And that was even after trying an external eGPU with it.
Maybe it depends on the type of applications you're running
but in real world testing.... couldn't keep up
at least not in my testbed
external eGPU?
you sure both of you talking about the same macbook
because M1 does not support eGPUs from what I know
eGPU (external redundant my bad).
M1 macbooks do not support eGPUs???
@terse dune what macbook
MacBook Pro (13-inch, M1, 2020)
who made eGPU drivers for the M1
that is not a current mac
that is a shit mac
it can only do 1 monitor

i can confirm it is a shit mac 🙂
current macs on the other hand can do like 3
But my windows can't open it😫
Windows system can?
No.. no drivers for windows. Make a bootable linux live usb of your distro of choice & download checkra1n after you get to the linux desktop.. or use the tool you just replied to called odysseyn1x
Ok you were the one I replied to earlier. In that case, whatever way you were just running checkra1n GUI or tui, built into the checkra1n executable there’s also a CLI mode called by the option -c. -V gives you verbose output in the terminal itself & -v gives you verbose boot on the device. So if you can access a prompt to enter commands on whatever linux you were using earlier to access the checkra1n tui, just type ./checkra1n -cVv put the device in dfu mode & it will do everything else automatically, with a much more detailed output for diagnostic ability enhancement
Yes,I successfully rejailbreak in safe mode with odysseyn1x,and I remove the bad tweak,now everything back to normal ,thx
Does checkra1n works on iPadOS 15.2?
No
Can i just add?cause it keep warning me
if u wanna install a malware sure
so i tried to install checkra1n on windows to my iPhone 8 14.8 and got failed to connect to lockdownd -17, anyone know a work round
It appears you are asking if you can jailbreak your device, you can find out that information by using /canijailbreak or in the "Get Started" section of ios.cfw.guide.
Error connecting to lockdownd
Unlock your idevice and trust the pc if a popup appears, then disconnect and reconnect the idevice.
iOS not supported or device not supported, but chart says otherwise
Make sure you are using the latest version of checkra1n, and enable allow untested version in the options. A11 users on ios 14+ will also need to enable skip a11 bpr.
Stuck on checking for device, or device won't go info dfu?
Make sure you're using a [usb-a to lightning cable](#bot-commands message) (as well as an adapter if needed). Use a pc with an intel cpu if possible, and don't use a VM.
tried to install cyida and got this
now its saying unable to fetch bootstraps
NOPE NVM FIXED IT
ayo, u think that be funny, this be funny, i fixed it by using a vpn
Holy crap, for anyone that was following earlier, I finally found the guy whose phone this is.
I kept posting on group chats for the festival that he lost it at. Someone finally forwarded a message to his facebook about it.
And confirmed yes, he is in fact a Russian millionaire XD
oof
how do I import the .plist file to magma evo?
Good stuff dude
W
Guys when i try to jb my ip5s ios 12.5.5, it shows me this error. Tried another version but no luck.
Checkra1n issues for A7 Devices on Linux Hosts:
Checkra1n won’t really work for a7 devices on a Linux Host. You will need to do a replug trick and may even need to use an older version of Checkra1n.
Tutorial: HERE
Oh and that
Rain?
what
Is sileo known to crash on 14.8?
I just finished installing odysseyra1n and sileo seems to crash after a few seconds of being open
iPhone 7 14.8
would like to hear some thoughts
It shouldn’t
checkra1n or odysseyra1n?
used odysseyn1x
jailbroke with checkra1n first, didnt install Cydia, then ran the odyssey bootstrap thingy
everything seemed to work smoothly
but alas, sileo won’t run
would my AMD cpu interrupt with anything
I read on the guide that Intel or Mac is preferred
I mean Amd tends to have issues with checkra1n but it shouldn't affect sileo
I see I see
Interesting
Gotchu bruh
so run shortcut after rejailbreaking with checkra1n
do i need to run odysseyra1n too
nope
wow nice
You are a life saver I appreciate you very much
Here is the drink I promised
🍺
heh np
@pale sedge are you guys aware of the issue?
thanks, it might be fixed now
so is he getting the phone back or do you get to keep it as reward lol.. (after getting his stuff off it)
you sure its fixed?
I'm apparently not lol
issue is fixed now for real this time @jaunty whale @hot ember, sorry about that
Can confirm, thanks
You’re fine bro thank you for taking the time to fix it
prolly a stupid ass question but can i jb with checkra1n on iphone 11 15.2?
Never
No and you will never be able too
why
because checkra1n doesnt work on A12+
checkm8 technically exists on the hardware for a12-a13 but theres no way to exploit it
Cause the exploit is only a7-a11. (iPhone X and below).
yeah
I jailbroken 2 times by checkrain on my iPad 6 gen with ios 14.4.2 and A10 processor and both times the iPad restarted... what's wrong?
yes it should
do you see the checkra1n loader?
if not, wait
No, it just restarts and freezes on the loading screen
But, I used an old version of checkrain, is that why?
What loading screen? The apple logo?
wdym by wont work
Rip
bro checkra1n is a sick jailbreak tbh
True, and odysseyra1n is better
@dusty needle
?
Go to iTunes and it’ll ask you if you want to trust the phone. Trust it and re-open checkra1n. Check if fixes.
okay i will get back to u
No, it freezes to a black screen with a circle loading infinitely
You downloaded an old version
So which one should I download?
The latest version
!odysseyra1n
Odysseyn1x allows you to use checkra1n and Odysseyra1n on Windows computers via live-booting. You will need a USB flash drive or SD card for this.
when is jailbreak for 15.2 coming ?
It appears you are asking about future jailbreaks. Nobody knows when a jailbreak will be released, but you can subscribe to notifications about releases by going to #roles.
If i update from 13.2 to 14.8 with the ota delayed will i lose sep if i jb with checkra1n???
For a11 yes
Damn i guess ill stay on 13.2🤣 thanks for the reply
I guess you have an iPhone X?
8+
same, touch ID isn't worth it, I'm on 14.8 without sep and don't care about the touch ID and passcode...why would a password matter? xd
for me it matter if the phone get lost or stolen rip personal information 😂
there are tweaks to replace it... but in case they restart the device, I guess the passcode is gone lol
mhm, my only reason I updated was to be on 14.5+ (for airtag support)
have working airtags > no sep
oh yeah they did not make a tweak for that 😔
yes, bioprotect xs
But only works in jb state
I don't mind losing my phone, in case someone with good intentions find it, they can access my settings / info
in case of bad intentions, I have iCloud...
I can use the built-in thingy too, but must people don't know about that
What’s up everyone!!! I have a question after running bootra1n and when prompted to sign in. I can give the user name but not letting my type anything for my password???? Any help thx
It won’t show the password as it’s being typed but it’ll still be working just type it anyway.
Also bootra1n is pretty old, it’s suggested to use odysseyn1x
Odysseyn1x allows you to use checkra1n and Odysseyra1n on Windows computers via live-booting. You will need a USB flash drive or SD card for this.
Ok thank I’ll try that then. Thx y’all
make a shortcut to quickly add passcode when you’re traveling.. then it’s protected
I tried using Checkra1n on my Iphone 7 running IOS 14.8.1. I can't downgrade IOS on my phone so I just guessed I could jailbreak it using Checkra1n. I get stuck on "Checking if the device is ready" how do I fix this?
It’s seem that iPhone X is not supported by checkra1n now
I jailbreaked 2 weeks ago and it was supported till now
which cpu has your pc
you really want to ping everyone?
Ryzen 5600X
Idk
use intel, amd has issues
Maybe B)
you cant
how can I use intel... When I have an amd cpu
find intel pc
Oh yeah lemme just go buy a pc that has intel gimme like 2 hours and i'll be back
lol
I say you that checkra1n has issues with amd
you cant do anything about it
oh yeah lemme fly to russia rq
Yeeeee
yes
windows pc?
Sure
Odysseyn1x allows you to use checkra1n and Odysseyra1n on Windows computers via live-booting. You will need a USB flash drive or SD card for this.
follow this
It worked.
What?
amd ver
bruh
if I have intel, then should I download the amd version?
i dont understand
oh
nvm
im to stupid
i understood
what infinite loading?
Os
can you post a picture?
K
It’s still tries to boot from flash
Btw
I done it with roofus
Not with other program
What I need to do ?
@crystal hull
Open BIOS settings
and boot from there
There what?

Find “Boot Order”
It is different for different manufacturers, so you’ll have to figure that out
yourself
Then when I loaded from flash it gives me that
Same happens
Bruh
Maybe I need to try download i 686?
And load from I 686

Do you have a 32-bit processor?

🧔🏿♀️👉🏿👈🏿
what
is your pc 64 or 32 bit?
64
you cannot change that
It happens when I booting from flash
Is your checkra1n iso mounted in UEFI or MBR?
Mbr
Change to MBR in BIOS settings then
How

Look up google or something
I already
It is different for different manufacturers, so you’ll have to figure that out urself

Wth
if we understand what is there
I mean that there is an icbm, not uefi
mbr*
Enable CSM
Odysseyn1x allows you to use checkra1n and Odysseyra1n on Windows computers via live-booting. You will need a USB flash drive or SD card for this.
try using this instead
/tag
To use checkra1n in CLI mode, type the following command into a Terminal window.
macOS:
/Applications/checkra1n.app/Contents/MacOS/checkra1n -c
Linux:
sudo checkra1n -c
checkn1x:
Press Alt-F3.
odysseyn1x:
Select “Shell” then type checkra1n -c.
Once checkra1n CLI is running, connect your phone to your computer and place your phone in DFU mode.
To enable safe mode, run checkra1n -cs.
might need to change BIOS usb settings to initiate USB devices sooner
checkn1x works well for me but most here use odyssey one
It appears you are asking about future jailbreaks. Nobody knows when a jailbreak will be released, but you can subscribe to notifications about releases by going to #roles.
my alt
oh jeez
Man
what did they even say lol
checkra1n work for jailbreak latest t2????
depends on which iPad Pro
I can't get my iPad Air 1 (A1474) to enter DFU mode?
Not necessarily
How so?
My iP7 had a time where no matter how precise I did it, it just wouldn‘t enter DFU mode
Checkra1n issues for A7 Devices on Linux Hosts:
Checkra1n won’t really work for a7 devices on a Linux Host. You will need to do a replug trick and may even need to use an older version of Checkra1n.
Tutorial: HERE
And was also with checkra1n
But it a7 should be fine on macos
I'm on macos, I will try that linux fix just in case
I believe you did it wrong... follow the steps shown on screen
No shit
bcoz entering recovery/DFU has nothing to do with checkra1n
I admit I may not have 200IQ, but I‘m not too stupid to read
4 sec both, 10 sec vol down. Only 7 sec vol down required though because they add a couple seconds to be safe, it enters DFU mode after 7 actually.
That’s recovery ^
Yeah and since checkra1n puts you into recovery mode automatically, when you do it it‘ll put you into DFU mode
Have you ever done a checkra1n jailbreak?
You're not using a USB-c to lightning cable are you?
no I haven’t
Up to you, whether the pros of the downgraded version outweigh the cons of the tether
To enter DFU:
Press and hold the power and volume-down buttons at the same time for 10secs
Release the Power button but keep holding VolDown
checkra1n will automatically detect your device in DFU
Bruh then why you tryna explain it to me when I‘ve done checkra1n like five times jfc
This didn't work, I used checkra1n version 0.9.7 and 0.9.6

Hmm are you using a USB-c to lightning cable?
Yes, the one that came with my iphone 13
Rip
Tried it, it worked flawlessly. Thanks!
Exploit failure
yh
Reboot and retry
was trying to use checkrain -c -V on tethered boot device and it is not booting in verbose mode, nor there is an error showing on checkra1n
how do i get it to boot up
well i dont have mac
is 14.6 supported?
yes, enable untested versions in the options
For compatible devices yes
SE 2020?
SE 2020 nope
dang it
You have unc0ver though
alr thanks
@near osprey hey emma
so im trying to save a blob of my software update
but it keeps saving as 15.1.2
15.2.1*
okay if you’re jailbroken and on 14.5.1 install system info and dump onboards
though their use case are limited depending on how you got to 14.5.1
so thats going to save my blob if i wanted to go back to that specific software right?
Yes
Though I don't think systeminfo saves onboard blobs?
I know deverser can though
Systeminfo works
How to save blobs without a computer or a jailbreak (only use as a last resort)
If you're using a Procursus jailbreak your blobs are automatically saved weekly and can be found here or by running sudo shshd in a terminal.
ios 14 thing
it depends, ota blobs can only be updated too iirc
Can I jailbreak 15.1 ?
no
I heard rumors about chackra1n iOS 15.1 jailbreak vor every Devise coming is it true?
no
Ok
There are trust worthy developers that found security issues that could be used for jailbreak in iOS 15.0-15.1
(That’s what I found)
vulnerabilities exist yes but there are no public exploits (aside from checkm8)
I know I mean there is a possibility that something can come
I have an ipad pro 9.7 inch and I'm trying to jb on ios 14.4. Im using checkra1n and im wondering if theres any possible way to do it on windows
Windows sucks
我有冰激淋
我有汉堡😂

your mother not my problem
my friends wondering, can u get checkra1n on iOS 15?
you can use cokes jailbreak no
alr, ill tell them, thanks
No

Hey there, I was trying to get checkra1n to work through bootra1n but I cannot seem to get it working properly? The start button will not be accessible, no matter what I am trying. I Am however able to get checkra1n to work on my old laptop which still runs Kali Linux. Anyone know how I'm able to get it working? If you need more information, feel free to ask me. I'll try to answer as detailed and precise as possible :)
bootra1n is outdated, use odysseyn1x
Thank you! I'll check it out👍
^ since on kali
yeah I can get it to work on kali but I really prefer to run it on my laptop so I can jb on the go 😄 Still thanks for the information though!
Np
Seems to work like a charm! Thanks again😁
When will it be released for iOS 15.2?
Stop crossposting
you gave away ur password :O

I appreciate the head
Anyone can help? When I connect my iphone checkra1n just stuck
To use checkra1n in CLI mode, type the following command into a Terminal window.
macOS:
/Applications/checkra1n.app/Contents/MacOS/checkra1n -c
Linux:
sudo checkra1n -c
checkn1x:
Press Alt-F3.
odysseyn1x:
Select “Shell” then type checkra1n -c.
Once checkra1n CLI is running, connect your phone to your computer and place your phone in DFU mode.
To enable safe mode, run checkra1n -cs.
Try this
its the default password, so its the same for everybody
yep i was joking lol
its fine
everyone should change it for security tho
i mean you're not wrong
How can I put it in dfu mode, I forgot 🥲
For how to restore in DFU mode, see /tag dfurestore
Thx, worked
hey i need help my checkra1n is getting an error everytime i try to jb
im on the ipad pro 9.7 running ios 14.4
it says detected corrupted kerninfo
Use checkra1n 0.12.1
not supported yet
right
Do someone know when will iOS 15.2jb be released ?
no, rule 12
maybe next month
No. We know just as much as you do.
Also do not ask for ETAs
lolllll we all want it fam
ios 9.3.4
None
iPhone 7 does not even came with iOS 9
Im also waiting for jailbreak my 12 pro 15.2 now
great
How long take time to get my jailbreak?
nobody knows
GG
15.2 my current
Ages.
wait on 15.2
u cant even get a jailbreak on 15.X
It appears you are asking if you can jailbreak your device, you can find out that information by using /canijailbreak or in the "Get Started" section of ios.cfw.guide.
Not yet anyway
if u have 14.8 (like me) or anything lower, dont upgrade to 15 until they update it
oh sorry
Np
i know :3
With an iP7 you don't
ok
i imagine this would just be a prompt that opens as soon as you unlock the phone
since its literally impossible to reenable a native passcode
14.8 ota still available?
nope
no
A to agree
at least it works more than unc0ver
i am finally living the dream of playing paper toss
Amd is not cool with anything 💀
i mean their graphics cards are pretty sweet
runs beat saber just fine
so im happy
They got Intel to get off their butts and actually innovate
And while their GPUs lack some features that I use, their CPUs are pretty nice and the extended support we get is super handy
My 1600X crapped out and I could just drop a 3600 in
-it's paid
-name: checkl0ck
-Allows device unlock, password autofill, 3rd party apps biometric authentication
-Apple pay is not/will not be supported because that requires SEP
-supports ios 14.3 and above
-require setting up faceid/touchid in stock mode. Need to be done only once https://t.co/DMvrePu0mL
LOL
Have you ever use lockdown beta?
Because that does exactly the same but without biometrics, and behaves in a NATIVE way
both of these would be removed as soon as you reboot the phone
Yes, no one is denying that
But it is better to have that little "security" than to have nothing.
If you’re trying to ic bypass Checkra1n doesn’t even support the device
Also ic isn’t cool
I mean arguably a false sense of security is worse than no security at all
Which device
ipad mini 2
ios 12.5.1
i think
it was my dads who passed away i dont have access
ive done checkra1n in the past but its been 1y
Checkra1n issues for A7 Devices on Linux Hosts:
Checkra1n won’t really work for a7 devices on a Linux Host. You will need to do a replug trick and may even need to use an older version of Checkra1n.
Tutorial: HERE
oh
Try to look here
Np
Old af checkra1n version
Let me just check what the latest is
Do you know the fix for what I'm facing?
Lmaoo
Ok that’s fine
I have to do that reconnect usb thing yeah
I tried it here and I sent what I got

If you got to the part where you have the checkra1n screen then it’s fine
But its not moving
You just gotta update your checkra1n version
I assume you’re using the usb method
Did you use checkn1x
Remove then readd real fast
Or bootra1n
Uhhh
Like I said it's been a while
Like 1.1y
Since I've donenthis stuff
I was like hard-core until I left
So just upgrade ye?
Odysseyn1x allows you to use checkra1n and Odysseyra1n on Windows computers via live-booting. You will need a USB flash drive or SD card for this.
Follow this tutorial to get an updated version
Sec
Oh god
Wo confused
What now
Well fuck me
Yeah it's not working regardless of what I do
😫
you should be jailbroken after this
but its not
what is the problem now?
you did the replug thing?
Yep
3 times
Same shit
The only time I got checkra1n thing at all was scroll up
and you have no checkra1n loader on homescreen?
Discussion of iCloud/Activation Lock/passcode bypass, asking how to do it, or posting about it is not allowed. No, it doesn't matter if the phone is yours or not. We will not help you with it.
How to remove Activation Lock - Apple Support
If you forgot the passcode on your iPhone, or your iPhone is disabled - Apple Support
I don't need help with that
Idc about that I just want to jailbreak the ipad thats all
How do you want to use icloud locked device?
I will figure that out I don't want help with that

I just need to jailbreak my father's ipad

Which is not working

Any ideas why?
If I were to go on mac should it fix it
Because I kinda have a macbook
If os x will load 
We dont even help with jailbreaking icloud locked devices too
so
you have to figure out yourself
I am having this exact issue but on. iPhone X IOS 14.5. I have jailbroken before on this exact iOS version and phone but it seems Checkra1n will freeze no matter which way I can get checkra1n this includes Linux mint, CLI but the touchscreen is unresponsive when it jailbreaks even in safemode, Checkninx, jailm8. This happens after I select “Skip A11” and it's exclusive to this toggle as I have tried every other toggle and it won't freeze unless skip a11 is checked. I have tried different cables genuine and cheap, different ports, different pcs. (I have ssh access and have already tried deleting tweaks I believed to be causing it and N/A even in safemode) Can someone help me figure out how to jailbreak? Ping on reply
I just tried cli and it works and jailbreaks but once it boots no screen interaction does anything can't swipe or or anything but I can use side buttons
Also odysseyn1x checkra1n freezes btw
Tried safemode with the cli it boots into safe mode but Istill can't touch my screen
Try force reboot using "control + alt + delete", suddenly, it's fixed issue for me
In non-jailbreak state your screen working perfectly?
Yessir
Lol
?
As I mentioned in my message
I see Reddit posts and comments suggesting 12.3 I will try that now and come back here and see if it wrks
This guy claims that's entering dfu only and using the cli will cause my issue but how do you enter recovery mode then dfu mode?
People
What's next?
I change usb cable, try on safe mode
Idk what's next
What I need do?
I pay one person to help me
yes
What is explot failed 31?
@lilac folio what device
Iphone 5s
iOS?
Figuring stuff out rn but maybe yeah
I heared that internally they are working. Someone on github could see the repo and they were working on something. Source is github, somewhere in the deep....
What
Do u know if it is possible to JB a ipad air 4?
It appears you are asking if you can jailbreak your device, you can find out that information by using /canijailbreak or in the "Get Started" section of ios.cfw.guide.
Yea but no ETA
What's the problem?
Also, please straight-up ask your question, don't ask if someone can answer your question.
Someone will come around to help eventually.
It's just adding an extra delay.
Chill out. They tried 0.12.4, 0.12.2, every 0.10 and 0.9.7 and it’s still not working. Also tried on Linux and Windows. Different cables, different ports, as well.
🤔
Not everyone has the money to buy a mac on top of an iphone and a windows device.
I’m still having issues with my screen freezing after jailbreak. I read online that more than just passcode and Face ID can cause checkra1n to freeze
So my question is. Would a supervision cause this?
The device is currently being supervised by a tweak I installed called mybloxx
Hm. Good question. My gf has a supervised iPad 7th Gen from her school, I‘ll have to see if that causes problems when I jailbreak it
I am just confused on why I can’t jailbreak anymore without freezing checkra1n or my touchscreen when I use cli and boot up
I am able to tunnel into the iPhone via SSH when it's jailbroken
I mean, supervision should not be causing any problems, but there‘s so much bullshit that can cause a jailbreak to fail
I removed the mybloxx .dylib and .plist via ssh
And it didn't fix it
Thankfully I have blobs saved
But I would rather not ya know?
Yeah iv done both at least 25 times each since iv been trying to figure this out
Ah damn
I read online that I should enter dfu mode from recovery mode for the cli
But I don't know the button combination
I-
For dfu more from recovery mode
Checkra1n puts your phone i to recovery mode automatically and after that gives you a guide for DFU mode
What device you got?
Checkra1n will freeze if I use any other version of checkra1n not limited to checkninx, odysseyninx, jailm8, normal Linux
After selecting skip a11
And only a11 it’s exclusive
And yes my passcode is disabled and no Face ID. IPhone X 14.5
But what phone are you trying to jailbreak
^ I posted this yesterday explaining the entire thing
Eh ok. Yeah heard of it a bit here and there……. Jk lmao yeah Ik, I just forget cus I never deal with it
Isn’t that piracy?
How



