#off-topic
1 messages ยท Page 11 of 1
Says Turing architecture
The 1630?
Ah 6th gen
Forgot nvidia separates that
But yes, the 1630 is Turing architecture with 6th gen encoder
Weird, finding multiple reviews while looking for the encoder specs that were saying it was Pascal. Yay bad tech reporting
6th gen would be what 10xx had though
So you are right
Turing encoder+ is 6th gen
honestly yes
the 1030 doesn't have one
so far as I know the older x30s don't either
also the 1630 was like a late addition to the 1600 series so it makes sense that it's turing
otherwise it would be volta like the earlier 1650 non-super
though I think gtx 1630s are about as unicorn-like as gt 1010s or 1020s (yes that exists) so maybe that's why the tech reporting is wrong?
Probably
Tech reporting was right. That's why it's important to look at generation number of encoder(not name because as I showed in my own silliness architecture isn't the factor)
oh duh I misread the screenshot
Honestly the 1050's NVENC is pretty okay
Doesn't help that nvidia commonly does this ha
wait 6th gen nvenc is turing
No
wiki says so
It's 7th gen on 1650super+
evidently they and nvidia disagree
It's not Turing
I seem to have larger files with my 4070 super than the 1050
Stop using architecture as nvenc generation as I just said above
Because architecture โ nvenc
Tu117 if what I read is accurate
that's listed there as 5th gen
which is volta
smh
lol
Most of the time
all of the time
And wiki is clearly wrong
Imagine wiki, which can be edited by randos, is wrong
SMH my head
sadly the nvidia table doesn't go back farther than maxwell
Because those cards are "dead" just like win7

Must you keep bringing this up?
of course
but I was wondering why the generations are offset
but I think it's because everyone considers volta a separate nvenc generation but that table does not
Volta was an architecture. Those had 6th gen nvenc mostly
WAA! Taco TIME Hype!! Have a Great Day! ๐ฎ
@amber sparrow some people use obs as some form of a "linear editor"
SMH my head
Right?!
That sounds kinda miserable. Why linear when NLE exists?
Add in my video to obs that I want to trim beginning and end off of, start recording when it gets to where I want it to start on final product, stop recording for the same
Waaaaaaay too much effort
But people do have a propensity for using the wrong tool for a job
Like using my pliers as a hammer sometimes
And it's realtime, oof. Like (and I am dating myself here) recording a cassette tape to another cassette
Sometimes you need a hammer but you've got pliers and you don't know what a hammer is
I haz rock, I smash thing
Haz pliers in hand but walking back to truck to get hammer would take overall less time. Repeats same mistake 10x a week
Yep, that's me some days.
oof
@karmic tiger what about "crash" by Dave Matthew's band
wat
You said you don't like a crash and I didn't wanna crap up dev channel
i only like a crash if it's somebody else's fault so i get my insurance payout 
oh lmao
I wasn't saying I don't like a crash, I was referencing the motivation of exeldro's pr
Matty do what Matty do
๐
That
@feral bay out of sheer curiosity cause I've been trying to find sewing streamers, what machinedo you have?
@civic quarry this whole "browser source audio on windows 11 distortion when obs is minimized or covered". Think there's something to the HAGS thing? I'm on 11 and just tested browser sources a few times with obs minimized and zero distortion
A few people now have said turning off HAGS actually fixed it. I dont have an nvidia gpu to test this theory though
Maybe @open rune wants to be my guinea pig
I actually need HAGS to be on though
But its only for a test. No pressure though
I'm sure when Mitchell isn't busy he will explore this
is this the table you wanted?
https://web.archive.org/web/20180814195717/https://developer.nvidia.com/video-encode-decode-gpu-support-matrix
For Older GPUs, click on the buttons below to open the complete tables
Been down this road already, no
ooh that's a cool one, ty
what do you mean by machinedo ?
I meant sewing machine
cause yeah, the new one doesn't go back
yee
I have a bernette b05
never quite could get the hang of electronic ones, idk why
there's just smth with them I don't vibe with
Any thoughts behind it not occurring here on my win11 system with obs minimized?
The only reason I got it was because I can also automatically do embroidery, which i've been looking for. But the singer I had before was very similar where you had to use the dials to change what type of sewing you wanna do
oh yee I guess that for embroidery it's better
But after getting used to this one I kinda like it was more because it has a bit more features
At first I used my singer for hand sewing and use the brother for embroidery but eventually my singer broke and ive been using the brother ever since
I should get into embroidery (< has zero fucking time to get into embroidery but that won't stop him)
are you on 23H2? i havent tested since that released but am checking now and unable to repro.
lmaooo, honestly embroidery is really easy with one of the automatic ones. At first I was doing embroidery myself with the singer but once I got the brother I could finally have that do the work while im working on someone else
Ah, yes I am on 23h2
Maybe they fixed it?
i would say they probably did, i was able to repro immediately the 1000000 other times i checked.
now to wait for someone in a support channel to confirm as well.
You're going back to school, stop finding new hobbies you don't have time for
says the pot to the kettle
I'm not "going back to school" lmao
i had HAGS on when testing just now.
Hm. Weird
which is why I've been saying that "some configurations don't like HAGS"
which is still true
the speed on that response tells me you def donโt
and also you don't even gain anything from posting gay nsfw anyway
i gain the funny
yeah usually breaking the rules as your first action is frowned upon
this borin im out
No, I just happened to be looking in this channel
not particularly dead if people are responding, either
and also it's like 8 pm most people are getting ready for bed
yeah sure buddy
I was talking to some friends before I looked in this server it's just a thing I do.
Good.
Ive had issues with modern windows 11
Hags issues
O_o wat the heck
im glad i didnt act like that when i was 13
if anything i would of tried to start a conversation about narwhals
narwhals, narwhals, swimming in the ocean, causing a commotion, cuz they are so awesome
wanna feel old? that shit was 14 years ago


Equally ancient
Popped up when I was doom scrolling YouTube on my PC yesterday.
classic
Ask your doctor
should talk to your doctor as yes it has side effects
it also depends on why you are even needing
<.< you just reminded me i need to take mine
I just take one of those every so often when I get heartburn
better to take tums
imo
protein pump inhibitors have a long list of sideeffects
actually omeprazole didnt do much for me and my doctor put me on something else
i take mine as directed by my doctor in the early monring and at dinner
no but i think that is a side effect
also protein pump inhibitors are starting to look down on because of the sideeffects
so i wouldnt take them without a doctor saying its a good idea
FDA was talking about pulling them from OTC
and dizziness ๐ตโ๐ซ
any chance its being triggered by diet?
i have missing insides so thats why i need it
ah you need a good gastro doc
when my acid is bad i drink some slightly warm coconut milk
or oatmilk
the fat and calcium help i think
oh dear yeah you need a gastro doc asap
nsaids hurt my sensitive tummy hard
your insurence may have a free nurse line
you could talk to them and see if they have any suggestions
theres many forms of that stuff
a dietitian could also provide info on non medical options to help
This just popped up on the landing page of YT for me and I am literally listening to it right now
https://www.youtube.com/watch?v=iWIADZKU9dw
I need to clean out my ears i need to listen in 4k again smh
heh i used to love Flyleaf, saw them at warped tour a few times
anyone played gear tactics? how mouse friendly is it? meaning how much do you use the keyboard vs the mouse?
could it be played all with mouse ?
So the issue I'm having with RL seems is my gpu being stupid. Low load overall(70% or less), but when the fps is tanked(played a couple games before work this morning and was staying at 80fps for a minute), the dang clock speed on gpu was only 1100mhz
Very odd behavior. Need to figure out the WHY since my gpu won't honor the min freq set in adrenaline
See if GPU-Z reports something for the PerfCap reason
one of my usb ports on my laptop dies might be whenever i plug in an ssd, but sometimes i can use the ssd there
and when it dies i mean i can't use it again. cant even plug a simple laptop cooling pad nor mouse
even if i restarted or whatever
and it seems to be random when it revives
im on the verge of simply buying a usb-c dock lol
any idea why this happens or how to fix it?
Will do but there shouldn't be any. When clock speed drops, so does power consumption. It's really odd. And this behavior is happening in ONLY rocket league
Going down to 80 for no discernible reason is odd. Running 240fps cap but I can reliably, outside of this issue, run over 500fps
I cap at 240 because I'm a reasonable gamer, not a minecrafter hahah
Ooooo this guy might be on to something
https://youtu.be/ilJgsVeBZqM?si=agWcNUStTvvT7eky
I'm seeing the behavior reported in a few places. Less demanding games having worse performance due to the weird clock speed drop
Do you have a similar option to NVIDIA where you can configure a game to run at "max performance" to keep the clock speed topped out?
Yes but it doesn't change behavior just like setting a min freq in adrenaline doesn't actually do shit for my gpu. That giys video is spot on with multiple quirks I'm dealing with
So it seems like afterburner is the way
I would be so angry lol
It's an easy fix if it works. Will know in about 2-3 hrs
That is exactly the kind of shit I would encounter if I bought an AMD card
Then I'll play at 360 capped haha
Because I've only capped at 240 thinking too high of a cap was causing shenanigans
Oh interesting, AB can disable a lower power setting that isn't exposed otherwise?
Seems so
I'm now curious if that was what I was dealing with in spider man remastered. Never paid attention to clock speeds while playing it. But for a 6950xt, average of 90fps at 3440x1440 felt low
Maybe this is the special sauce you need for Star Citizen 
well if it's killing your cpu&ram that's just what ya get
there are ways to pin the card to high power state&all... it's just that doing so be pointless ๐
Fair enough lol
i have one big faver
I have streamed once this year
So the streaming career is going great
Also I hit a new high of 5 viewers
best stream of the year!
Woot! Go get 'em!
๐

Pump up the res. Full send!
Looks like the apps memory is cloudy.
Lunch debate: Peanut butter and strawberry jam sandwich on white bread.
Do you serve with white or red wine and why?
What about blackberry jam?
strawberry
Nah, game handles even normal ultrawide like asssss. Not performance, just scaling
@open rune that afterburner setting indeed fuckingnfixed it!
That's easy - any flavor of Boone's Farm ๐
Your plan to murder the planet with excess power consumption can finally proceed as planned
Nah, still downclocks to like 70mhz when idle
Just isn't downclocking while in game now
1850 was the lowest it dipped vs the 1000-1100 when the low fps occurred
Yeah that kind of fluctuation at the upper end is more normal
1100 is less than half of what this card can do so was TANKING in game performance
Weird that it does that so hard on easy to run games
RL on this hardware shpuld NEVER see 80fps
Even at 8K probably
Now I'm curious. Might need to enable that super resolution thing and see what kind of fps I can get at 8k
Mix the wines and serve pink?
Spoken like a true genius sommelier
Blackberry jam is generally not sweet enough to offset the saltiness of peanut butter. Also, this is a PB&J, it doesn't pair with wine, unless a box wine, and with those, always white since red box wines are usually full of Quercetin, a flavonoid in red wine. This interacts with the ALDH2 enzyme to inhibit its activity, leading to the accumulation of acetaldehyde, which can cause headaches.
Bringing the science, I love it! I went with blackberry and white wine which is indeed from a box. ๐งก
Yah!
I also like the taste of peanut butter and hot honey. A little salty, sweet, and spicy.
Ooh, adventurous! Sounds great. But you didn't say which wine you would have with it.
Still white, since I'm not a fan of headaches. LOL
Peanut Butter & Malort
There is no superior wine; only superior wine-drinking experiences
And the superior attitudes of the drinkers who know their PB&J pairings nose in air
LOL
open a red and a white, time to experiment
if you go white, get something like a crisp Vinho Verde, the pair against the sweetness of the jelly.
In New Zealand, the standard would be raspberry or plum jam
As for the wine, I'm not entirely sure. Myself, I'd go with a red, probably a port of some kind.
What, not this? https://thebakersalmanac.com/homemade-kiwi-jam/
this account is DMing me and trying to sell me "stream management" is there a policy against solicitations?
If you were messaged by a user who you suspect may be malicious, scamming, a bot, etc, we recommend reporting these users to the Discord Trust and Safety team so that they can be addressed appropriately. We strongly encourage users to be mindful of DMs they receive from users who are in any public Discord server.
Please report any suspicious private messages to Discord, either by using the Report Spam button in a DM, or by reporting it directly to Discord Trust and Safety
will do, thanks
Well this sucks. We have free Netflix as a perk from our cell provider. It recently was changed to a "with ads" plan. No big deak right?
Some shows are not available at all on the "with ads" plan. I still have a couple seasons to go in this freaking series
That sucks.
Can you like, pay the difference, for the next plan up?
Netflix has been getting worse and more expensive, but I didn't expect them to start limiting content. What a dick move
I can, but can't justify even a small expense rught now
mr eyebrows from rodneys stream
Ahhh.. Copy that.
I do have some small hope, we get included Hulu starting soon. This show may be on there instead. It's the Walking Dead, and they have the sister series'
yeah, power is back on. Stupid driver hit a power pole.
Walking Dead was removed from Hulu a bit less than a year ago.
Dang. Netflix must be using it as leverage.
It's on Amazon Prime Video, but not sure if you have that.
I do! I will check, thanks so much!
Only available to purchase, and not for free in some countries, though. I can't check on anything outside the US, really...
Amazon Prime now has ads too, unless you pay a little something extra for no-ads.
Yeah, but he'd rather watch ads than just not be able to watch it.
Choice does matter.
Looks like some the series is free with ads on Prime. Not the season I am on, but will keep an eye out
I don't watch Prime much, unless it's the only place for "x" film or show. Already have YT Premium, YT TV, Disney+, Netflix and Paramount+
Waiting for Costco to start some kind of streaming service
We've been thinking about cancelling it, but still order household goods through it often enough to justify the cost.
I've been curious to create a new non-prime amazon account and order the same things, see if there is a practical difference anymore.
That would be an interesting experiment!
Oh wow, Netflix has 245 fewer movies and 118 fewer shows on the ad supported plan.
Licensing restrictions my butt. They put a bunch of popular stuff behind the wall.
https://www.businessinsider.com/movies-tv-missing-netflixs-ad-plan-walking-dead-bullet-trian-2022-12
yeah i canceled mine
zen 5 is coming 2h of this year
A fish TANK based off the M4A3E2 made on stream today
Self-advertisement or advertisement for others is not allowed on this server unless it's directly relevant to a discussion or question. Please read the rules in the #rules channel.
@uneven spear WAHOOOOO #encoding-talk message
O.=.O?!
The latter half of that
Oh, thank! OwO! I am now "community cowordinator". Seriously. That is my title... XD
This is not an anime- or furry-focused community. I just owoed so hard for so long that I have converted /everyone/.

yesterday i went to a samsung dex tablet in best buy and TIL'd they dont support obs (first message here) joined may17 2021
OBS isn't designed for mobile devices.
Meow meow nya nya meow :33
Is that a challenge to get it to work on Android
No. And if you do, /please/ do not make a guide about it so that people think it "should" work, and then they come here and complain at the support people about it.
Sounds like a yes
No. It sounds like a "seriously, don't".
I wont do that lol
Isn't there some awful x86 container-emulator stuff
Yeah but it rather not bother
...but rather build OBS 
ey that's the game I'm playing
hi
OBS codebase is ARM-ready, so you just need to make a build script
It's runs somewhat on a Raspberry Pi 4
not sure of Qt is available for phones, so you may have to write your own GUI ๐
last time i tried raspi 4, i couldnt even do window capture without rendering lag lol
I said it runs, not that it works well ๐
Haha
Id be running inside of termux, but yeah i doubt it works
XFCE works tho, somehow
Getting obs to run would be the easy part, quite frankly
making it do something useful is a different story
Like when yer in termux ya just can't do much, are confined to it etc
Yeah true
Id probably run it as some kind of 24/7 YouTube stream thing if i was the one setting it up
But thats very in efficient to cpu encode 24/7
ideally you would do an actual android version of it, that actually runs on android and uses the capture APIs and such present there
Better off to encode once and just stream the same file the whole time
Yep
yeah, pre-encode it
eh, phones have pretty decent encoders these days. it's just that the APIs to use em can be a tad iffy
Like of course they have hwenc APIs. That's how your camera app encodes video
Yep
But if you're using obs inside of termux there's no way in hell you'll have hardware encoding
At least not plug and play
you'd need a rooted device and a whole lot of glue
Yep lol
like basically you'd map the android encode APIs to vaapi
that's what I would do
but at that point.... might as well actually port things over to android for real and use that mapping there if it helps
Yep lol
Commute long, should invent teleportation
yike commute
I had a 45min commute when I just started working, never again
Traffic in the morning was doing something to me I did not want
i have 45min in the morning to school, morning traffic suuuucks in the big city. work is only 4km and i meet at most 3 other cars on the small backroads when i drive there 
Commuting is so bad for us. One good thing covid did for us as a society is show people (and especially employers!) how many of our jobs can be done virtually
I delivered pizza during it, though. ๐ฆ
I walk 3 minutes to my tram stop, tram is 7-8 minutes, then 5 minutes to the offce
or 40 minutes walk with the doggo when I bring him to the office
โค๏ธ
i really should stop driving to work, but i also really don't feel like not sitting down after standing up 8.5 hours at work
My feet hurt just thinking about it. Treat yourself
my feet already hurt as i ended up with heel spurs on both feet when i got back from summer vacation ๐
Oof, that sucks. Sorry you have to suffer that.
and thanks to that i guess i've compensated/changed my stance so now i'm also flatfooted according to my doctor
fun the whole way down 
Oh goody. Then the consequences get to move throughout the whole body. I know this feel
i just want my body to leave me alone 
I'm naturally flatfooted, embrace the flap-flap-flap of walking on smooth floors like a duck
You can also clap your feet like hands
๐ฆ
quack
#๏ธโฃ ๐ฆ
started running again this week. Feels good 
what a coincidence lol, i've also been doing that recently. i'd brisk walk then insert a short run
nice ๐
samesies
im like 22 and i already have a dadbod comparable to my dad lol
we're not really obese, but the dadbod is kinda annoying for fashion
how long can you run?
I would like to end this line of questioning ๐
just joking around of course, yeah, I feel that
is it pretty normal that after i run, i feel my heart rate is really really high, and my chest kinda feels heavy
like, my heart is kinda struggling haha
If cardio hasn't been routine, probably normal
well i hope i dont push myself so much id get a heart attack
im not satisfied with the length of my run lol
I can use the elliptical for a whole two minutes at a time. LOL
The exercise machine I foolishly bought instead of a treadmill
Even if you have no knee problems at all, it fucks you up.
yeah, a little bit ๐ It will improve, im pretty sure
thanks
ppg scene i made for no reason
hello, i came here to ask about Java in arch repository. basically there are jdk17-openjdk, jdk8-openjdk and so on. however Java 21 package is simply called jdk-openjdk. so since this package doesn't have a specific version in the name, does it mean this package will later be updated to Java 22 and so on, while Java 21 will have a separate package created for it?
Yes, especially on arch as a rolling distro, the package without numbers are on the (most of the time) latest stable version.
For the last question: it depends. Is it really necessary? and then will the arch maintainer support it for a period of time? or someone from the community => AUR
that's very good, thank you for explaining
i just asked that out of curiosity, since i don't think i'll be using older Java versions, but will be interesting to see how that works
@slow crow 
Pinging them for a reason?
I repasted my laptop cpu and clean the fan as well and now it doesnt take 3 minutes to boot
Nice
It wasn't even bad
the thermal paste was fine and the fan was also fine im not sure why doing that made it faster.
Hmm
Ive been tempted to try those graphite pads instead of paste one of these days, but ive already repasted all of my systems, so that will have to wait
I want to try a thermal pad because it doesnt make a mess
and I dont need to worry if my cpu is going to catch on fire because i didnt put enough thermal paste on
Yeah
apparently repasting my laptop made it hotter which is nice
or it was because I was doing something
All the ice melted when you opened it
they are streamer, ping them because found out they are in same server, have reason
it went up to 70c just installing runescape lol
Keep in mind that pinging someone who is not assisting you is against the server #rules
"just installing runescape" could be a lot of work though
CPU maxed out decompressing files or something? 70c is fine
yeah it is a dual core that runs at 3.2GHz

Don't do this 
I didnt know there was a black and white version of World War Z
People love their shaders
"Ringo forever" ๐
I need help
Is it possible to recover a deleted msg in trash can (GMAIL)?
If it's gone gone, and you have any systems/devices that will have it synced locally in an email client, disconnect them fully from network and start them up to find it
ok
parsec is working well so far
parsec is nice, i just wish I could troubleshoot when it misbehaves
are there more stable solutions?
Depends on what you consider stable. No remote play software can fix a bad internet connection, but you can try Moonlight.
k ill try it
Ah I forgot about moonlight. Don't remember why I chose Parsec over it
do you think this will be okay?
Just do 1080p60 tbh
well i dont want the internet to go down while im away
umm i wonder if this could play the game im playing >.>
ill try logging into steam and try it out so i have something to do
i got it for $170
back in jully for my mom and dad
the amd gigabyte is having a boot issue:S
so i guess i just leave the pc running with it streaming and then i connect to it where iam?
"In S mode", does that mean you don't get to launch non-Microsoft software?
correct you have to switch that off
make it a full windows
lots of laptops ship that way tho
i was able to talk my mom through it

Also there was an issue where we had to remove logitech file so it doesn't mess with obs is it okay to restore that file in later updates or still causes obs to crash ?
Try ptm.
It makes tiny laptops go turbo mode, owo. Also tiny egpus.
Never restore it.
Ryto is correct here, owo.
Discord just made an unnecessary update for mobile again
my fix wasn't about CQP values as much as it was actually making it use CQP.
Issue is there was no preset for AMF AV1, so it was using the encoder defaults of CBR 2500. My fix was just to make it use an actual preset.
and it makes it use the same CQP number that's used for NVENC AV1
I understand what your fix is. Could make it more in line with nvenc av1 mapping with those infos. More fixes will get you dev role ๐
Oh, it does perform the same as nvenc? Logs confirm it?
Bluee Pen?! 
I4m not sure I understand what you're suggesting here?
Because nvenc av1 the cqp value in log is different from what's set in user view
internally in AMF_AV1, the qp value set in obs is also multiplied by 4 before being given to the encoder
and I'm pretty sure you'd find the same for QSV
I literally had fuck nothing to do here lmao
Caffeine not kicked in(though I've already been awake for 5 hours)
the whole thing here is just that obs multiplies by 4 the CQP number for AV1, in order to preset a consistent UX no matter the codec
Yea. For sure. Didn't realize that part was already in there for amd shenanigans. I'm over thinking it.
(I also don't like trying to read code so I just talk out my booty)
so that, the same CQP number presented to the user would be roughly the same quality (yes kachin I hate you) on H.264 and AV1, even though the encoder uses different scales behind the scenes
your booty is cute so I don't mind listening ๐
Actually, this time, it's fine to use that Q-word here. You're also correct on the principle here. 
You listen to farts? 
you could argue that a good part of my job is listening to the way the earth farts
Earth farts reminds me of the bog in labyrinth
Smart. 
Added Capture Audio option to window/game capture on Windows [derrod]
Added GPU rescaling options for streaming and recording outputs [derrod]
hot
Are those in nightly?
pog
damn, that's some banger changes
Those two changes will simplify tons of scene collctions
Yes!!! Very stoked about these
Gpu rescaling is a nice thing, but that's only the beginning. Full on separate sessions for stream and record so I can stream 576p/30 while recording 3440x1440/120
That's where the real update will be
Just use a janky 2 PC setup. Can recommend. Nothing wrong here. 

I like my 2 PC Setup, so much room to do whatever I want in OBS without worrying about the game as well
I was reading that thinking that rescale output options were added to simple mode and wondering why, but after looking at the program have realized that it's just that the scaling filters have been added to the rescale option in advanced
It's not just filters
but ive also been using multi-PC + multi-monitor setups since the 90s
Just got back from the dentist. Only need $6k work to be done on muh teef.
Apparently crowns are expensive.
and i feel weird about a 1400$ on my car lol
all better and back in chewing now tho?
Oh, I didn't get the crowns today, just a cleaning. I just need them.
remember folks, always use the one toothpaste that the 1/10 dentists recommended, because chances are he's actually looking out for you while the others are trying to ruin your teeth to get you to come into the dentist more to make more money
Ouch.
how great, updated the fimware on my xbox controller, now i need to reconnect this fucker evertime i bootup the pc
๐
Now that I sorted that whole steam desktop controller BS, my 8bitdo has been a pleasure to use
when did Fenrir become forum admin
like... 7 years ago?
lol it's been a minute
ive bought 3 pair o rechargeable batteries for my controller, and then its starts to bein an ass in wireless mode 
My 2PC setup is best described as "unsupported", so I expect issues, but it's also very fun to push the limits and test
Anyone have a suggestion for fan control? I have Afterburner but don't really use it besides to adjust my GPU fan. Would like more control over my case and CPU fans as well.
Pen helped me find an issue in the obs-ndi implementation and I got to compile and test my own version to see if he found the right thing
I do need to figure out potentially a new thing in source copy tonight, so that'll be fun 
Fancontrol. Is something that i enjoy
Thank you!
Lots of options to get it running how you want
I'll give it a look. Appreciate it
@open rune you mentioned checking perf cap in gpuz. that apparently doesnt exist on any amd gpu
just thought I'd share
rip
Hwinfo has it maybe? Or i looked at my cpu's limiters
Must be GPU-dependant
seems only nvidia exposes taht
Does anyone know a way to denoise images better using multiple images of the same scene. Low light noise the noise is different in each image so sampling multiple should be able to produce the best results
I just use one image with a longer exposure time, owo.
But that just makes hot pixel noise worse kachin ๐
average them?
30 seconds in almost pitch black and there's still noise
I stack them in photoshop 
EVen longer, then. I've had 10+ minutes before, owo. "Bulb" mode is what you're looking for.
You're lucky I'm not Penwywern. I'd say something cute and cheeky. XD
My phone goes up to 30s
does your phone not have a night mode that does this for you
Cute & Cheeky is the name of my new punk band
Maybe it does but I only really use pro mode to shoot raw images

(do it anyway
)
But I'm too blushu. D:
And samsung does disgusting overly smooth noise reduction that destroys all the details
And some weird ai trickery
Welcome to phone cameras tbh. Grab that camera app that isn't the manufacturers and hope it's not forced processing
Open Camera on android
yeah the thing with phone cameras is they do a lot of computational photography to compensate for the tiny-ass sensors and tiny-ass lenses
I tried that and it's way too basic.
Lightroom on pc has noise reduction that worked well last i did noisy dark stuff
That doesn't happen in pro mode it just captures the raw sensor data
your average phone upon producing a single image actually has been secretly stitching 4 or 5 images together
You might just be making more work for yourself in the raw mode too if it has a dedicated nightmode or similar, so test that aswell
But where's the fun in pressing a button?
I'd argue the same for doing photography on a phone, not a camera
I mean if you're looking to do photography and have fun making it manual
get an actual camera
But ye, most of the photo editing suites on PC have noise reduction for it
preferably one that takes film
though admittedly dealing with film might not be all that fun anymore
NVIDIA has finally unlocked 8 simultaneous video encoding streams on all consumer gaming GPUs recently it seems (source: Videocardz), which is great news for anyone using multi-rtmp, Source Record, or the new Twitch client side transcoding feature. Looks like it is supported all the way back to 1000 series at least.
yes
but we knew this three days ago already
How do you sample multiple images for noise reduction in photshop?
Is there some kind of averaging function?
and it's supported for every nvenc-capable card except the 1630 for unexplained reasons
can someone send me streamelements discord?
!se
If you need help with StreamElements products or services, please join their Discord server or submit a support ticket. The StreamElement's support team is better positioned to help with your issue.
Hello guys.
Can someone help me how to change resolutions on OBS? I would like to make a video of an old game called soldier of fortune and i want to make it look like the video was recorded in 2001 or atleast 2002.
!new Settings > Video, change both the top and the middle box to whatever you want. You can type in them. See below for general guides. Visit #windows-support if you have questions after you've read the new user guide, owo.
โจ If you're new to OBS Studio:
- follow the Quick Start Guide to set up your first scene and get streaming/recording
- learn more about the interface in the Overview Guide
- follow the Stream Layout Tutorial series to create a stream-friendly layout, including setting up alerts and a chat box
๐๏ธ If you prefer to learn with videos, check out:
- our OBS Studio Tutorials video series presented by EposVox
- EposVox's OBS Studio Master Class series
- Nerd or Die's How to Stream with OBS Studio series
Thank you.
Is welks, owo.
can someone check out my youtube channel for feedback and changes??
hello guys , i dunno if this is the place where i should put this issue but...
i have had this issue about 3-5 days ago while streaming the issue i have is that when i first start the stream everything seems fine and all alerts working just fine but after sometime of the stream not sure how long my alerts or if i may say all my browser sources start lagging as in (follower / bits/ raids) events start lagging and freezing so badly i did try refreching the sources and did turn off hardware acceleration in the browser removed the sources and put it back again but it didn't seems to fix anything and based on the task manger my pc is fine on performance cpu+gpu 60% and 72% max and network connection is fine aswell as bitrate always green
(note: i am using streamelements for alerts).
Please advice thank you all ^^
If you need help or have questions about OBS, check out our #support-portal first!

D:?!
from my old issue here, well it seems it might not be just due to the ssd i suppose. today it was working and i have a wireless mouse usb receiver, and a laptop cooling pad connected. the dying port where mouse was connected to died again
it was while i was using it lol
Self-advertisement or advertisement for others is not allowed on this server unless it's directly relevant to a discussion or question. Please read the rules in the #rules channel.
so elgato announced the 4K X and the 4K Pro capture cards
the X is the upgrade from what the HD S was, and the pro is the PCi slot capture
but why I am reading that the X is the better option? Wouldn't the PCi one be better?
surely whoever says so gives their reasons for saying that?
it had to do with resolution
a lot were commenting about it on their youtube channel
if im not mistaken, both do 4K but the X can do 4K144hz and the pro can do 4K60hz
im just surprised that the PCi capture card does less
likely only passthrough on the X, check the specs.
i was planning on building a new PC very soon and the pro was very tempting
The pcie one is basically a usb capture card slapped on a pcie card if I'm not mistaken
My phone seems to use 3:4 for images 
4000:3008 on raw and the closest it reproduces to jpg is 3008:4000
The pro can't record 4k120, only 4k60
i said that already
change it in settings. but pretty common for camera sensors
Oh I wanna capture at the most native Resolution on my OnePlus 9 pro
But for some reason it makes a jpg + raw when I make a raw screenshot
I hate oem camera apps sometimes
I was answering matty, sorry that this was unclear.
Also they don't seem to remember to make raw images
8K/60 pass through eh?
And hdr
so from what i understand the pro can do 8k passthrough while the X cant, but it cant do 4k120 but the X can
is that correct?
yes
Seems that way. Tis a weird couple products
The X also can't go beyond 4k30 hdr capture
The aver ones were kinda weird too
i wanted to get the pro for the convience of having it in my PC
should i still go with that?
what are you capturing?
PS5 games
If you are playing those games at 4K/120 and want to capture 4K/120, prob want the X, no?
i will probably be playing them at 60fps
Yea it can
oh
Not all games
And I'm not judging. Our ps5 is hooked up to a 1080/60 tv hahaha
Duct tape the X to the rear of case. Problem solved ha
to the side of the PS5 of course
With enough duct tape and glue, anything is possible
wouldn't matter since you're not transferring anything but the live capture, nothing to gain there
i see
the usb-C on your motherboard would presumable have it's own controller too and not share with other pleb USB ports causing any issues, so probably doesn't matter?
the PCIe should be faster right?
faster at?
transfer speeds
Looks like pcie 2.0 x4 is maxed at 2GB/s
but thats more than enough for 4k right?
They haven't updated pcie connector at all which is a weird move considering we have pcie 5.0 boards now
no need for more bandwidth, reengineer/testing and extra cost for no gain to the user
Could be more gains. Maybe that's why the capture isn't as good on the pcie card
Pcie 4.0/5.0 could probably do 4K/144 HDR
That sounds like a pretty good gain to user if ya ask me
btw, yesterday i got a SSD NVMe stick for my PS5 and it got me thinking...is this how all internal SSD drives are right now?
i thought they were the old, bulkier ones
2280 form factor is pretty common, yeah
But m.2 nvme ssds are the way to go
(be aware you don't buy SATA M.2 SSD)
is it just form factor or are there spec differences between SATA and NVMe?
LMGTFY
spec and speed

it's SATA obvs, so 6gbit max
what did you say bout my momma?
Is she easily found on a Google search? 
Googles "Naar's mom"
No results
i see...because i was VERY interested in getting the NVMe from my new pc build
gnaar would get you serious sam results
would you then recommend a SATA drive for my main disk and then a couple of NVMe as back up/additional drives?
Go all nvme, fuck cables
That's what you said, now you're stuck on slow ass space Internet.
Because it is.
why did echo say that it was sata that was faster then?
Echo did not say that.
Echo def did not say something that silly
Which is accurate
And is not faster.
sata maxes at like 550MB/s, slow as molasses /s
i asked which is faster and he says "sata obvs" how else am i supposed to read that?
you asked for specs differences tho
so then its better to install nvme for my new pc rather than using sata?
(be aware you don't buy SATA M.2 SSD)
That is what they were getting at. There are SATA M.2 and NVME M.2. The SATA ones are slower
gm chat
I have both, for convenience. Couple 2tb nvme and four, 4tb SATA SSD drives.
hopefully not sata m.2's?
๐คฃ
i think i will get myself at least one 2tb nvme stick in the new pc
i unfortunantly could not find a samsung one that was 4tb
Why must it be Samsung?
they are some of the best, no?
Ehh...
i avoided kingston as i had bad experience with them before
oof
samsung makes solid drives is the general consensus. unless you buy their QVO stuff
i know lol
isnt that the one that was failing last year? the 980?
Oh shit this is gangster
Damn.. I should have gotten that one Matty instead of the 4tb Crucial one I just got - would be an excuse to have two of 'em ๐
make sure you update the firmware in that, if it hasnt already been updated.
https://www.theverge.com/2023/2/7/23589116/samsung-ssd-990-980-pro-m2-health-failing-defective
that article is a year old, surely by now they fixed the issue?
OH and Echo - thanks for the fancontrol recommendation. Exactly what I was looking for ๐
you cant be too sure
if you update firmware yes
got it set up easy enough with some nice fan curves? full control over all fans in your system?
the drive you have may have been on the shelf since then, you dont know for sure unless there are dates written on the box, or on the drive after opening it
SAMSUNG 990 PRO SSD 4TB https://a.co/d/dqMR2Ux
well thanks for letting me know either way ๐
There ya go. Samsung, 4tb, Gen 4
i didnt say they dont exsit, just couldnt find them at the stores i went to
No fancy curves yet. Played around with the basics and got things set up with basic curves. Removed Afterburner ๐ Going to play around with it more today. Spent a few hours playing MSFS 2020 and had no issues with temps
basic min/max with some hysteresis serves me well too ๐
Kicked the case fans up to 100 - and realized I may need to take the PC outside and hit it with the air compressor ๐
๐
I get annoyed when me noctua fans be running at 600rpm already.... like 600 is fine, but still
for some reason the one port i have my front case fans on of course isn't controllable, so i need to fudge that around at one point too
Not much dust inside TBH - I blow it out with my airbrush compressor occasionally. Think this was more of dust on the fans as I normally run them pretty low since I don't put a lot of strain on my PC
honestly I need to setup some profiles
like
so that for normal desktop use all fans off
works fine with what I got
and map those profiles to respective keycombos
Hmmm
i only notice every so often when my GPU spins up for a few seconds because the fan-off slowly lets it heatsoak above it's max
I did discover one of the front fans is on the same controller as the back fan .. have to figure that one out
I mean I might leave some running at like 200rpm or something to get a bit of flow, but that's about it
should play around with that, yes
my A4000 runs at a minmum of 30%
i should probably ditch SignalRGB and get artemis up instead, and have some actual RGB that auto turns off at night
Cookie - I keep my fans pretty low as well. Used to run on the bleeding edge of things with OC, etc. Now it's nice to have a semi quiet box sitting there doing it's thing ๐
Mine auto turns off. It's called "shutting down" haha
I used to keep my pc "on" 24/7 but F that wasted power. Even if its a minor draw
oh yeah i need to measure the idle power draw tbh
yo
Dang, wallpaper engine uses an extra 8W at system idle
here's what I have to keep it at so that the gpu fans don't turn on (as that would defeat the entire point). The cpu fan is rather quiet indeed thankfully, but yeah ideally I'd want to be able to go fully passive. Eh, one day
Pc case.under desk = fan noise doesn't bother me ha
Full passive - easy - put the PC in the fridge ๐
I got long cables and the computer is like 3 metres away from me desk 
Issue is that yer gal got ears :p
A fridge ain't capable of dealing with that wattage, though
I can run my noctua fans at 100% and they are still quieter than these shit corsair case fans at 40%
well yeah, those corsair fans are horrible at 20% even
One of em I don't turn past 35% because it makes a horrid noise. I think it has a bad bearing
But A)I'm too lazy and B) too cheap to change em out
I used to have my PC under my desk but my crappy BT ear buds had connectivity issues. Prefer those when running my D&D games and talking via DISCORD. Still use my boom mic but with the buds I'm not wired to the PC
a fridge isn't passive cooling 
passive for the PC 
Live in Antarctica. Keep pc outside. Passive
oil bath in a fish tank --- I have ideas.... granted not all are "good"
Just connect your pc to a geothermal circuit
No dust to clean in the oil pc though so that's a win ha
Last year I saw a video about submerged servers that used only phase change as driving force
Get used McDs fry oil .... ๐
ye, me bt receiver is on a usb extension cord (not on me hub, the hub is usb 3.whatever 10G and you know how bluetooth and high speed usb love each other) and sits on me desk
Mine is built into the MB. Need to get a extended receiver.
bluetooth was a mistake. we need more dual-connectivity 2.4ghz wifi stuff
I'd like to see a mini itx board that doesn't have inbuilt RF stuffs and uses that additional space for extra usb controllers and ports instead. And oh yeah, toss out onboard audio as well and replace it with that
smh
onboard everything was a mistake 
especially audio and rf stuffs, imho.
we be talking abt desktop computer stuffs here
not laptops
i'm too forgetfel to remember to get everything anyway so it helps me instead of having to do like 5 orders to build 1 pc lol
but yes, sometimes computers would be better off as more pick-n-choose
all I want to acutally be on there in terms of back IO stuff is usb4 (the thunderbolt compatible kind, of course. couple ports of that), more type c usb, more type a usb, a 10 gig nic, more usb and let's not forget about more usb
If your audio is muting when you launch OBS, and you're using a Bluetooth headset, it's caused by the underlying design of Bluetooth. To fix this, you can either switch to a wired headset, don't use the Bluetooth headset's mic, or set your sound to go through the HFP device for your headset.
Note: HFP offers lower sound quality.
You can never haz enough usb
and by that more and more and more usb I don't mean an inbuilt downstream hub, no. I mean controllers.
downstream hubs I can buy by the pound and just plug in
controllers? Yeah well
e.e
absolutely not, no
if only more than 500ma was more widely implemented
usb 3.x supports 5V 900ma no prob in the default power levels, all without PD
supports yes. do motherboard manufacturers give you? no, apparently not
when the device asks for the usb 3.x 900mA level it absolutely does work, yes.
most devices just don't, though 
you take that up with asrock then, cause they sure don't
what device are we talking about here?
phone
explain then
what device do you have, exactly
i haven't found a usb-c to usb-c either yet to test if that port somehow gets juice
pixel 4A, charges 1.4A in the car fine, same at the wall charger
so the thing with phones is that they don't ask for that, no.
they just see that they're connected to a pc
and that's it
and the motherboard also won't provide it, per asrocks own answer to my email
your ac charger sets the stuff via config resistors on the data pins
and is your phone plugged in with a 3.x cable even
I literally got an actual usb 3.x device that uses the 900mA profile
works
that's nice
tested on gigabyte, tested on me thinkpad t430, the asrock deskmini a300 and another asrock board too
๐คทโโ๏ธ
so really what ya got going on there is phones
the phone would support more charging all while having data connection going on still
via usb pd
but that's something completely separate and requires c to c
well yeah
which is why i'm at some point(never) just gonna shove a 12v to usb-PD module in the front of the same
I can't think of a single phone that uses the usb 3.x 900mA level
cause what's the point there, exactly
so it's motherboards going "hell yeah 3.x 900ma" and phones goes "uhm no, usb-pd plz"
which you just said phones don't do?
correct
so yes, not no
USB-C is a hot mess of good! :3
last i looked into that to find out there was also a few other standards for higher usb power delivery and just
electronics was a mistake, go back to ooga booga age plz
Interesting, phone connected to pc (to me hub)
powered hub?
yes
I can charge at 10W from my PC but it does USB-PD
then there you go
measure the power on the hun connect to pc and you'll find it likely doesn't use that
I don't have a type a power meter available
becaus eyeah, powered hub was also one of the many "solutions" to this standard nightmare
so phones do support/negotiate the 900ma then
apparently so
this is a usb 3.x 10G connection, btw
a usb 2.0 cable would obviously ruin that
oh now I wanna check what it does when I enable MTP
yup, still works
on windows idk where to look for that info, but I guess google would be your friend
iirc the nirsoft usbview thingy should absolutely show it, though

makes sense the stupid usb port on the keyboard is borderline useless for modern usb mice when the entire keyboard only asks for 100ma allocation
hm, does a USB3 cable even exist in this household tho..
google falls firmly in the frenemy ctegory, sometimes i wish i'd rather be clueless on a lot of things
that is the question, yeah
GOOD DAY! Happy Caturday EH!! ๐ป
๐ฟ
Mercury in retrograde or something????
People not having coffee. ๐คทโโ๏ธ
I have my coffee, eating an early lunch.. then I think I might go "Matty mode - beers and gaming" ๐
I need more coffee. And food. Time for first breakfast.
I had coffee and breakfast and dog walkies and during all window support drama, I found a misspelling in a video that fortunately hasn't released yet so I can get a fix in for it.
Release the errors!!!!!!!
Sunset & Moonrish would make no sense! 
My morning started 3 hours ago, but rain and high winds kept the dogs and me inside. Once this next wave moves on, we'll get are mile in.
Sure - as the sunset finished the time of moonrish began
Yeah, we got that line of rain and winds last night right at midnight. Cloudy and gloomy this morning but thankfully not raining.
Hahahahahahahahahaha!
Being a D&D DM has it's 'perks' - other than being a nerd ๐
NERD!
๐ฒ ๐ค
Spelling corrected. Video rendered. Now uploading.
Hey, Hope everyone have a good weekend.
Depending on the information I get Monday depends on if I had a great weekend or not
I never thought in my 18 years of being alive I'd be excited for a Monday
Adult life be like that
I need the download again. I did a factory reset and it dont let me download so can someone PLEASE dm me the download?
download for what specifically? I assume it's OBS, but this is a non-support channel so you could be asking for anything.
!download
OBS Studio can be downloaded:
- directly from the official OBS Project website: https://obsproject.com/download
- Microsoft Store (Windows)
- Steam (Windows, macOS)
- Flathub (Linux)
ive been watching some 80s and 90s movies recently. Alien, Aliens, The Last Boy Scout, and 1 other that I cant remember right now
any suggestions?
The Princess Bride. Die Hard. The Goonies. Back To The Future.
The Secret of Nihm, wonderful animation by Don Bluth
Stand By Me. Titan A.E.
saw those multiple times already, ESPECIALLY die hard
im not complaining, just replying
Weird Al's UHF - waynes world
that movie with The Dude in it
you know the one
those are newer, aren't they? also robocop(the original ones)
The Big Lebowski
what about cheesy action movies?
Last Action Hero
you reminded me, i wanted to watch space balls
another Arnold movie: Twins
is it really good?
yes
i think ill watch spaceballs first
i think ive only seen bits and peices of it
or if i did, it was a LONG time ago and dont remember
thanks for the reminder on spaceballs ๐
Garry's going places now https://sbox.facepunch.com/news/vulkan
that says matt tho 
vulkan's pretty good
how can I donate to obs 
You can support OBS development by either becoming a patron on the OBS Patreon or by becoming a sponsor on the OBS Open Collective.
Find out more here: https://obsproject.com/contribute
ok thanks
i want to do the 10 dollar one but I can only afford the 2 rn
just want to support I use it so much I want support yall for the amazing app that is free :)
Hi
tomorrow is a beautiful day...my first day off work in 2024!!!!
Sweet - any plans besides sleeping??
hell yeah
Kiddos having movie night slumber party in their room with their own coochie coo board. Adults having a living room movie date night with ours
Excuse me that's supposed to be "Shark Coochie"
Top of the boat plate - coated marshmallow???
Prosciutto, dry salami, spicy salami, honey goat cheese, cranberry cinnamon goat cheese, blue cheese, assorted crackers(not see is a lobster dip and ritz toasted chips)
Well, I know what I'm putting on the shopping list next
OHHHH...... Have not heard nor seen those before - time for a side quest ๐
Never heard of em either. Kiddo spotted them on shelf in grocery store earlier.
Smart kid
Do you per chance get to string 2 of em in a row?
no, but i am taking 10 days off this month heh
There ya go!
Context?
๐ฟ
Escape from LA had more haters, for good reason
WAY more haters
NY so good
Since LA is a poor remake of New York
LA is a footnote in Kurt Russell's career.
Now, let's talk about The Thing...
if you havent seen it yet, search YouTube for the โRedLetterMediaโ 3-part review of John Carpenter movies. Its so good
but RedLetterMedia is wonderful regardless
They sold a sealed copy of Nukie for 80K USD on eBay, after destroying 140 other copies of it. Half went to St Jude, the other half to Wisconsin Humans Society
Nice, love that kind of support. And John Carpenter is a legend.
Yee
harry dean stanton just showed up, forgot he was in this entirely, amazing
So I have a qn in relation to gpu and fps,
From what I know, for game apps when u select the fps to be 60 the gpu then renders the game at 60fps and sends it to the monitor display
But on the other hand, for the non gaming apps like lets say obs studio, at what fps does the gpu render the app and send it to the monitor ?
And also does the gpu output the same fps for static images and videos ?
Apologise in advance, if the qns sound confusing ๐
apps, ideally, render at the configured monitor refresh rate - on windows this is determined by DWM. the canvas in OBS can be considered like a game, and therefore it runs at the FPS you've configured OBS for
Thank you, just to confirm so the fps in the obs canvas is the value that u have set in the obs settings correct?
Correct. You can confirm this by setting it to 5fps and attempting to move a source
Thanks, I will test it out later
Matt sorry but I have another qn , u said that the windows fps will run at the configured refresh rate
But what if I have 3 monitors with different refresh rates connected to my pc ?
Which monitor's refresh rate will windows use in this case ?
each monitor will run at its configured refresh rate
true, i have 4 monitors, 120, 65, 75 165
65?
Slightly overclocked 60hz one i guess?
the fastest monitor I got rn is me phone. Could do 90Hz if I enabled that, but eeh nah
It feels alien just seeing a 60hz video preview in the camera app for me lol
Cozy gaming fr
Infuriating that I sometimes still need way more perf than that to do things, tbf. Otherwise I could already have a small itx fully passive sys that does everything I need it to.... but nooooo, we aren't there yet due to the times where hardware that works for that not being brr enough
works for 95% of the time, but ye that doesn't help me
game optimization is a lost art
doesn't even necessarily have to do with games&game optimisation at that
When I need pure power I just need that, and not to run some game at that
does help with some games too tho, that's true
me sometimes with the 7800x3d tbh. sometimes more is nicer



