Sama IM01 Build

[slender bronze]

Spec List
CPU: Intel i5-13600kf
CPU COOLER:Thermalright PA120 with Phantek M25s
GPU:Gigabyte Vision 3080ti (Purple Strip removed)
RAM:GEIL Polaris 7200 16GBx2 (XMP'd No Stress test issues on OCCT or TM5)
Motherboard:B760M Aorus Elite AX
Storage:2x 2TB WD Black SN850
PSU:Lian Li SP850
Fans:Artic Bionix 2x 120mm White (Bottom Intake)
Artic Bionix 2x 140mm White (Top Exhaust)

Really happy and impressed with this case. I have gone for a NON-RGB build. Just a simple Black and White Colourway.

The case doesn't officially support 2x140mm top, but after removing the Fan mounting guides, I attached them with cable ties (Yes cable ties).
The choice of Artic's Bionix Fans series was purely because I had seen another builder on Reddit (Thank you u/leeproductions), for using this set up.
This ended up as a real lifesaver as I coordinated these (120mm variations) as my bottom 2 fans. With these Fan Frames being circular, it gave me space to access the Bottom Motherboard headers. If you have heard of the Sama IM01, then you would have probably heard of this case issue when using M-ATX MoBos.

I have even gone a step further and added an intake duct to further guide cool air straight to the CPU Cooler's Fins. This cut temps by 8°C. To me this was worth the effort of getting this Commissioned.

CPU Temps without Air Duct running R23 Multi Core (Stock Clock) - 95°C

CPU Temps with Air Duct running R23 Multi Core (Stock Clock) - 87°C

Regarding RAM... I was very skeptical of DDR5 and moving past the CL30 6000 M/s sweet spot, however I had heard great things online about Gigabyte's B760M Elite AX memory module, so I bit the bullet and went for GEIL's Polaris 7200 M/s 16GBx2 kit as it was listed as a compatible RAM kit on the Motherboard's support page.

Really happy with my build overall and I hope you guys appreciate the effort and time I put into this.
✌🏽

[viscid fulcrum]

Tidy and Clean, like "snow"!!! Simply Excellent!

[slender bronze]

Thanks dude! Really happy with it and appreciate your kind words😄💙

[pearl tundra]

that's sexy

The cables are done so well

Part choice is fantastic

fellow ram oc'er

❤️

[slender bronze]

Thank you😝 Alot of love went into this, so honestly thank you for your kindness and appreciation 🥰❤

[pearl tundra]

I can tell!!! It turned out amazing

[lean gyro]

Wow! Looks immaculate

[slender bronze]

Thank you! Am quite impressed with it😄

[full bramble]

Amazing build but is this im01 or im01 pro?

[slender bronze]

Just the IM01😄 it isn't the PRO variant. Although that is another good looking case!

[full bramble]

Maybe it’s a US issue but we don’t have a white version of this case here

[slender bronze]

Really? At the time I built this, there was a supplier of it on NewEgg. I did however purchase nearly everything of this build on AliExpress. It arrived promptly to myself in the UK. About 8 days turnover 😄 Do you care for me to find you the link of my purchase for you and see if its available to you in the US?

[full bramble]

Thanks for the offer and Newegg actually restocked it again so I’ll check it out

[slender bronze]

Beautiful dude! I actually live in the States now. Had a quick Google and they have it available on eBay too. But hopefully NewEgg is a suitable option for ya😄

[full bramble]

While you are at it I hope you don’t mind helping me with something. I was exploring my options for SSUPD cases but can’t seem to find any in stock. Do you know how to find out when they restock them? Thanks

[slender bronze]

Their website seems to be stocked just fine.

https://ssupd.co/

[full bramble]

Meshroom S is out of stock and only used condition is available. Newegg also doesn’t have it in stock for now

[slender bronze]

The v2 yeah, i can see your right is in used. V1 is brand new. Lemme have a scout about and I'll get back to ya in a jiffy

[full bramble]

Thanks a lot

[slender bronze]

Amazon and Microcenter have them in Stock brand new. Not close to the $89 mark you'll get it used for though🤔 about$159

[full bramble]

@slender bronze I also noticed how they charge a $15 shipping fee 😂 does Newegg not carry these anymore? Speaking of used how “good” is the good condition they are selling, any guesses?

[slender bronze]

https://www.microcenter.com/product/662368/lian-li-meshroom-s-pcie-40-mini-itx-mini-tower-computer-case-black

[slender bronze]

SSUPD Meshroom S V2 Mini-ITX Small Form Factor (SFF) Case - Full Mesh Side Panel with PCIe 4.0 Riser Cable - Tool-Free and Easy Accessibility (Black) https://a.co/d/4gJxkoz

[full bramble]

Would prefer a non-cable case since that riser isn’t long enough

[slender bronze]

Dude I honestly couldn't tell ya. Lian Li are pretty good in all honesty. Haven't had their cases so I really am not sure😂 Never shopped at NewEgg either as I said I'm from the UK and have only moved to Buffalo,NY and lived here for 3 months now. So I genuinely have no clue. Back in the UK we have different sites and AliExpress is a great site to use (heard its dodgy shipping over to the US tho) .
so im really sorry but i really ain't that guy to be asking hahaha have had no experience building a PC over here

[full bramble]

I would smooch ya gooch as a token of thanks since you tried your best to assist me. Hopefully Newegg will restock the cases and I’ll see what I can do then

[slender bronze]

I do hope so (that newegg stocks the cases soon I mean, the gooch smooching I'm sure the wife won't be impressed😆) if the WORST comes to fruition. Can always sell on the pcie4 cable and make some money back if you aint gonna use it? Maybe get in contact with SSUPD customer service and talk to them about what they consider "Acceptable" condition. I can't imagine it's like dented mesh or chassis. Maybe a few scratches here and there. Something a customer has returned after finding out it just wasn't for them, could be brand new but not sealed for all we know🤷🏻‍♂️ Definitely worth an inquiry in my opinion 😄 nearly $70 bucks cheaper brand new will defo be put to use towards a better component elsewhere😜

[full bramble]

Hahahaha you had to mention you were talking about Newegg upon saying “I do hope so”. I will inquire with SSUPD to learn more about their good condition for sure tho

[slender bronze]

Hahahahaha of course! She's looking over my shoulder so I'm playing it cool

Here i found a little snippet in their FAQ on what they consider "acceptable" condition.

If that looks fine to you, then MAYBE with your inquiry you can ask if returns are accepted with cases that are in "acceptable condition" in case the PC case is battered to shit and your like "Nah screw this junk"

https://support.ssupd.co/support/solutions/articles/151000200173-how-to-choose-between-different-conditions-of-pc-cases

[full bramble]

So the good condition is basically near perform since it was once used but inspected for any defects so I’m feeling confident

[slender bronze]

Tbh the acceptable condition PC case looks to talk about missing accessories and damaged packaging more than anything else. If the PCIE4 is what is missing then happy days! It's a win win in that scenario 😄

[slender bronze]

Exactly! It doesn't sound like a bad idea or option to go at all! Could be a beautiful blessing in disguise! However I would still inquire if it was something you could return though. You know in case it looks like it's been ran over by a Jeep Wrangler😂

[full bramble]

Hahah absolutely! I sent out an email and got a confirmation ticket. I’ll wait for their response about whether it’s returnable or not. Like you said it may be a blessing in disguise

[slender bronze]

Hey man, I'm part of this journey now, you better keep me updated 😉😆 I'm intrigued by it all! But I look forward to any positive news and you know hopefully the finished build😝

[full bramble]

I think they are sending it from mars considering the price of shipping and it taking 20 days to deliver 😂 not to mention I’m waiting for their response to my inquiry. I’ll keep you updated and will share the build once I’m done 💯

[slender bronze]

Oh shit😆 didn't even Clock the shipping times, holy shit🤣

Legend mate! Been a pleasure chatting with ya and I look forward to it my man🫡

[full bramble]

Likewise brother, likewise

[full bramble]

@slender bronze hey when you get a chance can you show a photo of hard drive/ssd storage support in this case? Site says up to 3 but I don’t know where I can put it 😂

[slender bronze]

For the Sama you mean? Or the SSUPD? 😄

[full bramble]

For sama 😂 I should’ve mentioned

[slender bronze]

No no you good! Here man😄

[full bramble]

So I can’t mount HDD on the bottom if the gpu is going to be there

[slender bronze]

I just stuck with M2s rather then HDDs or SSDs😄 but the HDD go along the bottom and the SSD go inside and outside of the front panel😄

[full bramble]

Also how does the power button feels to you? People have said it feels outdated and cheap

[full bramble]

I have an m.2 but I can’t give up my HDD for running my old games from 😂

[slender bronze]

Nah I got 2x25mm fans in the bottom slot(which isn't officially supported) they'll defo be room for two HDD😄 (if you choose not to have fans there ofc😅)

Dunno if it'll choke up your gpu tho🙃

[slender bronze]

Not a chance to have it externally?🫣

Put it in an external case?

[full bramble]

Yes that’s my issue. I would mount on the side bracket but my cooler can’t tolerate the. Also I can definitely use the HDD externally now that you mentioned 🙏

[slender bronze]

Cause if not you have room for 1 HDD in the inside of the front panel😄

And still have slim fans on the bottom?

[full bramble]

How do you feel about the case power button and the usb ports? Do they feel sturdy?

[slender bronze]

25mm fans with an MATX board was a ballache😂

[full bramble]

Does the case comes with fans?

[slender bronze]

Mate as far as power button goes it is awesome, concurve so is aesthetic and has a nice strong click😄

[slender bronze]

Not that I remember. Maybe 1?

But If it did I never used it

[full bramble]

Then I’d defo need some extra fans

[slender bronze]

Do have a read of my fan setup above, I went for Circle fans as they really gave me room for cable management and cable to mobo plug in

As squared fans would make it impossible to mount the Front Panel, and front USBs

IF you are pairing it with a Matx Mobo

[full bramble]

Oh so that’s why you used circle fans 😱

[slender bronze]

Itx is not an issue

[full bramble]

I wanna do atx for simplicity but sff cases seem too much of a challenge haha

[slender bronze]

Atx won't fit in this case🫣

Only MATX or ITX

ATX are massive

[full bramble]

Oh what about atx power supply?

[full bramble]

eATX is ginormous 😂

[slender bronze]

It supports an atx supply, but it limits your GPU size and you won't be getting an HDD on that inside panel 😅

[full bramble]

I guess I’m using it externally 😆

[slender bronze]

Here is the different set ups you can use with this case

So I used the top, MATX board with SFX PSU

[full bramble]

Lol what about matx with atx psu

It looks like a tight fit indeed

[slender bronze]

I think it could be done, but as you said it would be VERY tight indeed.

Have you got parts now? And just looking for a case?

[full bramble]

I got the case and psu so far and I’m waiting on the matx mobo to arrive

[slender bronze]

Definitely have a little look on reddit and see what others have done😄

Cause even with my build, I found the gpu tight. Depending on what you have. It'll make it hard if it's anywhere near my size haha

[full bramble]

Redditor have put in atx mobo and atx psu with a 3 slot gpu along with a custom loop without explanations so I can’t rely on that 😂

[full bramble]

My gpu is a 234mm card 😔 with a great personality

[slender bronze]

Wtf😂 insane work that is😂

[slender bronze]

Great that specs sheet said that's suitable for a an ATX psu set up 😄

245mm would be the max😄

[full bramble]

This is what I’m aiming for but notice that 24pin cable. Don’t you think there is a lot of tension over there?

Also my gpu cable doesn’t have an angled connection. Will this interfere with the side panel?

@slender bronze what do you think

[slender bronze]

Smart that

I like it

[slender bronze]

Itll be fine as long as the clip is seated to the motherboard panel lip.

[slender bronze]

Glass perhaps yes, metal and mesh panel no

[full bramble]

@slender bronze how did you have a white pa120 cooler? I wanna build similar to yours but color matching isn’t my greatest thing 😆

[slender bronze]

It's the PA120 (non SE) should be readily available 😁

[full bramble]

Case color, mobo, psu, and cooler color from this photo are the EXACT options that I have currently. What can I do to have a white/black combination?

[slender bronze]

Thermalright Peerless Assassin 120 White CPU Air Cooler, 6 Heat Pipes, Dual 120mm TL-C12W PWM Fan,Aluminium Heatsink Cover, AGHP Technology, for AMD AM4 AM5/Intel 1150/1151/1200/2011 https://a.co/d/h4xLm04

[slender bronze]

Maybe white cpu fans, give it contrast?

[full bramble]

Should I put a white acrylic tape on the psu 😂

[slender bronze]

White RAM too😄 not really one for RGB but can always make it white if you have it on your RAM

[slender bronze]

You could? May look tacky

[full bramble]

True

[slender bronze]

But the glue from tape wouldn't go well under the heat of everything 😬

[full bramble]

I’ll just get 2 white fans and use the black ones as case fans, should be enough for the white/black theme right?

[slender bronze]

Yeah defo!

Psu is that corsair right?

Can always get white Custom Cables to really show off some white too

[full bramble]

Yup

[full bramble]

Only a gpu cable would be any visible

[slender bronze]

White Psu extensions are cheaper

[full bramble]

Indeed

[slender bronze]

24 pin may be?

[full bramble]

Oh I haven’t thought of that

[slender bronze]

It's little things like that

If RGB is your thing can bet those gucci light up 24 pin cables

[full bramble]

You defo put your heart and soul in yours

[slender bronze]

Make it pulse white that would look mint

[full bramble]

I don’t like rgb but I can install a strip on top

[slender bronze]

Hahahaha I actually got inspired by this photo

[full bramble]

Insane but yours have an equal black and white

[slender bronze]

Sounds mad as I didn't even end up using the Noctua cooler, but it just all feel together perfectly haha

[slender bronze]

Yeah I love the look of the PA120

But also the Intake duct I had made too

Really improved temps and looked awesome haha

Sucking direct fresh air from the back and exhausting into the case and thst hot air being exhausted out the top is perfect for this little case

[full bramble]

Are you have 3 intakes?

[full bramble]

Your top fans look like exhaust

[slender bronze]

Yeah exhausting out the top exactly

[full bramble]

Oh gotcha

[slender bronze]

Here was my set up

Fresh air to CPU via back of case, fresh air to my GPU and exhaust out the top of the case

My top fans were actually 140mm for better CWM airflow as an exhaust

My cpu fans were phanteks M25 3000rpm insane little things

I also had these Stands 3D printed

It elevated the Chassis higher from my desk top to really get more fresh airflow straight into my GPU