Enbrighten Zigbee Light Toggle Switch | Home Assistant | Page 1

drowsy lynx Sep 29, 2021, 6:30 PM

#

I assume the brief blue LED flashes indicate the device is in pairing mode, so I don't know why I can't get home assistant to discover the device.

#

@toxic cove to answer your question, probably not 10 seconds. I can try a longer power cut and see if tha thelps.

toxic cove Sep 29, 2021, 6:33 PM

#

Devices actually scan for networks, not the other way around. It's like connecting to a WiFi network.

#

Try cutting power for like 10-20s, permit joins in ZHA, then reset it

drowsy lynx Sep 29, 2021, 6:34 PM

#

but i need to go into the integration in home assistant and say "add device" right?

toxic cove Sep 29, 2021, 6:34 PM

#

Yeah

drowsy lynx Sep 29, 2021, 6:35 PM

#

the annoying thing is the light switch is on the same power circuit as my internet modem, wifi router, zigbee coordinator, and home assistant rpi, so everything goes down. maybe i should mvoe all that stuff

#

but thanks, i will try a longer outage, maybe after migrating my other equipment to a different circuit

drowsy lynx Sep 29, 2021, 7:50 PM

#

Well, even w/o a power cycle, it recognized now and paired. However, it shows as unknown device unknown mfg. whereas before im fairly certain it said something else

#

I dont know if this matters, but for device last seen it reports today at 19:26, however it is only 12:53 so it seems to be reporting for GMT or UTC or something.

#

i wonder if thats going to screw w/ my sunrise/sunset node red automation

toxic cove Sep 29, 2021, 8:52 PM

#

drowsy lynx Well, even w/o a power cycle, it recognized now and paired. However, it shows as...

Try restarting HA, it will re-scan the device if it's showing the unknown model/manufacturer

#

What coordinator are you using?

drowsy lynx Sep 29, 2021, 8:53 PM

#

toxic cove What coordinator are you using?

something from Tubes, i dont recall the exact model number.

#

i'll restart and see what that does

toxic cove Sep 29, 2021, 8:54 PM

#

A CC2652P coordinator?

drowsy lynx Sep 29, 2021, 8:55 PM

#

yep, CC2652P2

#

just found the email w/ order conf

#

p2 v3 fwiw

toxic cove Sep 29, 2021, 8:57 PM

#

Doesn't really matter, I've not seen the "unknown model" bug show up with a CC2652 coordinator before

drowsy lynx Sep 29, 2021, 9:02 PM

#

rebooted HA, no change. still says unk_model by unk_manufacturer. The good news is, the entity is working fine and my node red flow to trigger it off during daylight hours is also working

#

so this appears to just be cosmetic in app

#

i restarted HA once, no change. then a couple mins later i rebooted HA + Coordinator

toxic cove Sep 29, 2021, 9:47 PM

#

Strange. Are you running a recent HA release?

drowsy lynx Sep 30, 2021, 6:39 AM

#

running core-2021.9.7

#Enbrighten Zigbee Light Toggle Switch