#Aqara T1M issues

1 messages · Page 1 of 1 (latest)

haughty cradle
#

Thanks for your response! I'm actually thinking my issue might be external to the device as I have two and they sometimes "restart" at the exact same time (sometimes only one). If I use the Aqara dongle the issue no longer appears. Thanks @grizzled spindle for your suggestions. It seems like I just have to have a second zigbee network for these devices.

I will reach out to support to see if they have any suggestions but it seems these lights can have multiple issues leading to similar side effects

#

Maybe I should see if I can downgrade the firmware. What version are you on @ebon spire

dapper sandal
haughty cradle
dapper sandal
#

I disconnected it lol

#

Probably not but could you imagine lol

ebon spire
grizzled spindle
# haughty cradle Thanks for your response! I'm actually thinking my issue might be external to th...

I dont think you're going to get much from support. They explicitly say to use their hubs. It's not new news that aqara devices act weird on anything other then their zigbee hubs/coordinators.

The only thing weird about it is the fact mine worked fine for months then magically started turning themselves on like a power blip happened, only after I changed from conbee II to slzb06.

Also, firmware has nothing to do with what it. I ran them with ootb v23 the entire time. And when I got them in the aqara hub regardless of updating some to v26 and leaving some on v23. They all stopped acting erratic. It would t surprise me if the devices end up getting Into some buffer overflow situation from zigbee requests not from it's hub that it handles incorrecly and basically chokes on itself. Causing a power reset.

haughty cradle
#

Some people have luck trying unrelated things, like getting a new one or updating firmware. 🤷