#S3 Box 3D audio / speaker
quick socket
how are you running HA ?
pliant heath
So I can migrate the s3 box 3 to the same vlan as well. I can try.
HA is running on Yellow
quick socket
having them on the same vlan would help troubleshoot 👍
pliant heath
On a CM4 4GB and a 256 NVME attached.
Ill let you know when I’ve migrated to the same vlan. Will take a reinstall of the firmware 😄
quick socket
if you could also let me know what services you have set on this page.
pliant heath
I’m not allowed to paste, no permissions to post images in this thread on my level
Basically I have that exactly as you pasted, except for me using the DUTCH language.
Perhaps this is the issue?
quick socket
that should be fine. so you are using nabu casa for your pipeline, ok can you check the following
image incoming
under settings>> system >> network
quick socket
just preparing dinner , check that you have the above image settings configured. then test... i will be back shortly
pliant heath
just preparing dinner , check that you have the above image settings configured....
I checked. The settings are the same, except for Local network not being automatic, but having the default value configured.
Anyway, out of the blue, I unhooked my device and moved it in the house to the living room, where I intent to use it. All of a sudden ColetteNeural started talking to me in dutch.
After this happened, I’ve moved the device into the same vlan of home-assistant. It still works. Now I’m testing it by moving it to the IoT vlan again. It should remain functional.
quick socket
cool , this is what i like to hear
pliant heath
Yeah, so not done with testing. Trying to break it so I can find a cause.
Would the S3 have enough power to also act as BT proxy? 🤔
quick socket
it would seriously impact it. however it can be more useful than just a va
pliant heath
It’s not for streaming BT activity, just incidental commands to my Jura coffeemachine for handsfree coffee 😬
Btw, lots of warnings when compiling the code on tensorflow code.
quick socket
the warning are normal nothing to worry about
quick socket
It’s not for streaming BT activity, just incidental commands to my Jura coffeem...
the BT proxy is very resource hungry and is best on it's own esp32 . obviously you are free to try it... and if it causes issues then you will know why 🙂
pliant heath
Good point. Thnx. I can test or offload it to one of the many other esp32’s around the house. 😬
quick socket
there is a lot you can do with the s3 box so have a play its a cool device
pliant heath
I had an unexpected addition in the box, not sure what it is yet. Lets try. Not sure if it’s a led or a pir.
I’m assuming it’s the led module. This is not used by the VA right?
quick socket
is it the kit that you have with the dock?
pliant heath
Yes I didn’t find a box without the kit. I didn’t know it exists. Just got the only/first one I found on ali. 😳