red marsh
Hi,
I am writing because I have experienced problems with haos in the past week.
My hardware ::
-Raspberry PI 4, powered by 18W power supply, 120gb SSD connected to a USB hub with power supply. The pi is in a plastic case, and ventilated
-Freebox with wifi password, 2.4GHZ and 5GHZ,
Since I ordered a PI4, everything seems corrupted on every haos install
I've tried to reinstall multiple times, I have even cleaned the ssd with AOMEI Partition Assistant, then plugged into my win10 pc, run pi imager,
Option as >> PI4, HAOS 11.5, and connected usb ssd
Everything okay, files verified.
So I just plug it to my pi as mentionned in the hardware, it starts, it goes on the main cli with HAOS info, then I connect it to wifi, with nmcli wifi connect ect, connection is successful. Obvisouly the gui is not available cause no wifi
Then I start it again, and there it goes hanging on wait network manager online bla bla, then wait kernel time synchronize, for almost 2 min.
From my box control pannel I see it as connected, but only with IPV6, then once the 2 min passed, it goes into the CLI, again it shows fine with the observer, and gets the same ipv4 adress it usually uses.
So I opened the online GUI, but the installation had failed.
I restarted the pi after the error message, but still can't get the install to work.
The 2logs from the morning :
first attempt : https://dpaste.org/fQ9qE
second : https://dpaste.org/Fc4Eb
*edit: i'm currently trying to use ethernet, but stuck at *
[supervisor.resolution.fixup] System autofix complete
apparently a lot of people are stuck with that message
Feel free to ping me, or ask anything, I'll provide whatever you need !
I'll appreciate any idea
raw anvil