and again, I set to 21.5 and it jumps to | Home Assistant | Page 1

chilly lava Nov 16, 2023, 12:34 PM

#

they are both through the Hassio app

vagrant umbraBOT Nov 16, 2023, 12:38 PM

#

Hass.io was the old name for the appliance like install option, that uses Docker. It was renamed in January 2020 and is now called Home Assistant OS.

wooden pumice Nov 16, 2023, 12:38 PM

#

Also, that's clearly Zigbee2MQTT, not Home Assistant 😉

chilly lava Nov 16, 2023, 1:02 PM

#

yeah, the same happens when I change the temperature on the device

#

only it usually jumps to 30*

#

I removed the device from Z2M and it functions properly.

#

Found this issue in Better Thermostat https://github.com/KartoffelToby/better_thermostat/issues/913 which sounds pretty similar

GitHub

Target temperature in GUI changes by itself · Issue #913 · Kartoffe...

Prerequisites nedis ZBHTR10WT [ ] hvac_modes: - heat - 'off' min_temp: 7 max_temp: 30 target_temp_step: 0.1 current_temperature: 20.6 temperature: 19.9 hvac_action: idle window_open: false ...

wooden pumice Nov 16, 2023, 2:50 PM

#

The #zigbee-archived channel can help you, but mine behaves itself - the temperature only changes when the device is operated by hand, or from an automation

#and again, I set to 21.5 and it jumps to