#I removed HaKomputer because it was not
1 messages · Page 1 of 1 (latest)
Yup
Did you check HA's log file for any warnings or errors?
https://dpaste.org/ or similar is far friendlier than that site
I don't see anything in there about MQTT or HASS.Agent... did you look at that before posting it?
Oh, I lied
2023-01-24 16:14:14.257 ERROR (Thread-3 (_thread_main)) [paho.mqtt.client] failed to receive on socket: [Errno 104] Connection reset by peer
...
2023-01-24 16:16:01.286 ERROR (Thread-5 (_thread_main)) [paho.mqtt.client] failed to receive on socket: [Errno 104] Connection reset by peer
Your MQTT broker isn't happy, that's probably the source or your problems
How to repair? ..
Check the logs for your broker, though from the rest of your logs I suspect you have issues with your network
Hmm, if it's a network problem, how to solve it? Send you hass agent logs or what?
Well... solving network problems involves investigating. Start by telling us:
- What hardware you're running HA on
- Whether you're using wired or WiFi to connect HA to your network
- Where your MQTT broker runs
-
Generic x86-64
-
Where is? in the sense? You mean HA?
-
I have a connection like this. The Internet cable enters the router and from the router I have a computer connected via cable and a computer with HA via cable. So both things are under one router.
On the same computer as home assistant 😄
As an add-on?
Then check the logs for it
For mqqt or hass agent? Or what?
The broker first off
https://imgur.com/aHOdLkv Hmm, I don't know why there are no current logs.
So?
So... images of text are horrible and I'm not wasting my time on that
You have a fundamental issue with your setup, based on the logs you have shared. Unfortunately I'm out of ideas and somebody else will need to help you