coarse obsidian
Hello
I have 2 Axis camera's M3206-LVE
One camera give me 11 entities, the other one gives me only 1 entity.
Both camera's have same firmware version: 10.12.114 (latest).
The 2 camera's have the same settings.
Both camera's are connected with same router Netgear.
Home Assistant:
Home Assistant 2022.10.5
Supervisor 2022.10.0
Operating System 9.2
Frontend-versie: 20221010.0 - latest
What can be the issue?
Regards
renaatdb
tired bramble
Do you have bonjour and unpn enabled on the single entity cam?
coarse obsidian
Yes , same settings.
mortal mirage
Do you have the same user group on both devices?
coarse obsidian
I have no groups in HA, do you mean user rights of the Axis camera? On both camera's i have admin rights.
tired bramble
I would factory reset keeping IP info on the single entity cam. What is your power source?
coarse obsidian
Both camera's are connected to AXIS S3008 Recorder (power source PoE from the Recorder) >> router Netgear. Restarted the camera, restarted the S3008 Recorder, restarted HA. Perhaps you are right and I need factory reset.
coarse obsidian
facrory reset did the trick for me. Thanks
mortal mirage
facrory reset did the trick for me. Thanks
I wonder why :/
coarse obsidian
Me to but it works.
tired bramble
Probably some setting you missed or likely forced HA to re-learn the canera
coarse obsidian
Problem solved. Thanks. But now I have a new issue.
I use https://community.home-assistant.io/t/turn-light-on-and-off-based-on-detected-motion-with-sun-condition/266013/42 blueprint for lights. I use motion sensor from this camera. So far so good but when the lights are going out .... the infra red light from the camera also go out....
mortal mirage
I use https://community.home-assistant.io/t/turn-light-on-and-off-based-on-detec...
You can disable the light entity
Or change how your automations are controlled
coarse obsidian
Or change how your automations are controlled ??. I prefer to do not disable the IR light.
I do not understand the issue. I control an other light and not the IR led from the camera.
mortal mirage
Maybe I don't understand. You're saying the blueprint controls the ir led light on the device?
coarse obsidian
No the blueprint controls light in the garden. When the camera detect motion (M3206-LVE 1 Motion Guard Profile 1) the light in garden goes on and off but also the IR led lamp in the camera goes off. But then the camera can not see anymore in the dark 🙂 ...
mortal mirage
No the blueprint controls light in the garden. When the camera detect motion (M3...
Ok. So you're just saying it's an unrelated issue you've gotten now? It's not something done inside the device then?
coarse obsidian
The blueprint automation works fine with the garden lamp. But I have the strange issue that also the IR led in the camera is going off. I use the motion detector from the camera, but i do not want the IR led in the camera is going off...
mortal mirage
I understand. I wonder what toggles the ir light then
tired bramble
This is normal. The canera senses that there is enough light for a video stream so the IR light shuts off.
There are some spots in an axis cam to adjust this.
You can change at what light level to turn the IR on or off
mortal mirage
I've added support for the light API from the cameras but is that different from the IR led controls?
tired bramble
In a few i will look and see what 'light' API is for an axis cam. I don't think it would be IR but give me a few to get a free moment i will look
mortal mirage
In a few i will look and see what 'light' API is for an axis cam. I don't think ...
Absolutely, no worries, I'm doing some other work right now but expect to get back onto the Axis integration early next year
coarse obsidian
This is normal. The canera senses that there is enough light for a video stream ...
When i set the garden light on manually the IR led from the camera is still on.
tired bramble
And the only thing in your automation touching the axis cam is the motion sensing?
tired bramble
Absolutely, no worries, I'm doing some other work right now but expect to get ba...
I don't have a light API on mine so not sure what it is but I suspect it's a level of light not an on off or a led indicator light on off
mortal mirage
I don't have a light API on mine so not sure what it is but I suspect it's a lev...
And no interface controls of the ir led?
coarse obsidian
And the only thing in your automation touching the axis cam is the motion sensin...
Yes
tired bramble
The Axis cams I have on my HA do not have IR. I don't ever recall seeing an IR on/off on an Axis cam (I work with Axis cams daily). The only thing you can do is change the IR filter to on/off/auto or you can tell it at what light lever to switch to IR filter on
renaatdb I don't think it's related to your automation. Something else has to be happening. Are you sure it's triggering IR or triggering the IR filter?
The IR light can be on while the IR filter is not activated
Are you getting a color video stream when the garden light is activated manually? Is it a black and white stream when it's activated by your automation?