#add-ons-archived | Home Assistant | Page 30

dense spadeBOT Apr 2, 2020, 5:55 PM

#

@timid osprey posted a code wall, it is moved here --> https://paste.ubuntu.com/p/rQGtXcWbmx/

timid osprey Apr 2, 2020, 5:56 PM

#

seems like mqtt broker isn't starting...

#

short log...

#

Setup failed for mqtt: Integration failed to initialize.
5:47:19 PM – setup.py (ERROR)
Unable to start embedded MQTT broker
5:47:19 PM – mqtt (ERROR)
Error initializing MQTT server
5:47:19 PM – mqtt (ERROR)
Broker startup failed: [Errno 98] error while attempting to bind on address ('0.0.0.0', 1883): address in use
5:47:19 PM – components/mqtt/server.py (ERROR)

#

any suggestions - please.....

#

restarted HA again - now it works!

#

should be happy but confusion reigns lol!!!

#

even found my 1st device!

sly kindle Apr 2, 2020, 6:15 PM

#

@timid osprey restarting HA doesn't restart the mqtt broker. So yeah, weird

#

they are separate containers

frozen cypress Apr 2, 2020, 6:42 PM

#

is there anyone familiar with installing BWALARM with the current version of HA, I am getting an error on the alarm UI 'This Component Not Working'

#

I have checked all my config can't seem to find out what is the problem

sly kindle Apr 2, 2020, 6:43 PM

#

bwalarm?

#

do you have a link?

gentle saffron Apr 2, 2020, 6:43 PM

#

Check your line endings @gentle saffron , it has to be LF, not CRLF
@dark yoke you're the best!!!!!!

#

was racking my brain all last night

dark yoke Apr 2, 2020, 6:45 PM

#

Yeah.. been using a few hours on that one (multiple times NukeFacePalm ) myself

frozen cypress Apr 2, 2020, 8:27 PM

#

cogneato

#

https://community.home-assistant.io/t/bwalarm-akasma74-edition/113666

pliant sage Apr 2, 2020, 8:33 PM

#

Hi. I installed the home panel add on and typed in the wrong ip address for hass.io. Any way i can change it?

sly kindle Apr 2, 2020, 8:37 PM

#

@frozen cypress that's a custom integration and not an addon

frozen cypress Apr 2, 2020, 8:38 PM

#

ok will re ask my question on the other thread appolagies

hollow falcon Apr 2, 2020, 9:18 PM

#

what is the best add on to graph data from z-wave temp sensors?

sly kindle Apr 2, 2020, 9:22 PM

#

graphana?

dense galleon Apr 2, 2020, 10:59 PM

#

has anyone got the garbage-collection-card to display in lovelace? Its installed from the HACS integration.

#

https://github.com/amaximus/garbage-collection-card

#

everything is install but I can't figure how add it in the lovelace

sly kindle Apr 2, 2020, 11:47 PM

#

@dense galleon integrations are not add-ons

#

lovelace is #frontend-archived

worthy echo Apr 3, 2020, 12:24 AM

#

how can I get broker ip, if I setup it via Add-on: Mosquitto broker? I am wanna use MQTT Explorer but it cant connect( http://i.piccy.info/i9/1d509d6528d041db61a68fd21da1f1ea/1585870899/44499/1367282/mqtt_explorer.png

sly kindle Apr 3, 2020, 12:52 AM

#

@worthy echo it's your host ip address

shy girder Apr 3, 2020, 3:20 AM

#

how can i get nginx proxy manager to work with locations & duckdns?

#

Tried to add Grocy as a location, for example. https://example.duckdns.org

sly kindle Apr 3, 2020, 3:21 AM

#

locations?

shy girder Apr 3, 2020, 3:22 AM

#

https://example.duckdns.org/groxy redirect to https://example.duckdns.org:8550

sly kindle Apr 3, 2020, 3:22 AM

#

you would make grocy.yourduck.duckdns.org go to 8550

#

duckdns allows for some subdomains

shy girder Apr 3, 2020, 3:23 AM

#

there is a custom locations tab in nginx proxy manager that i thought support subfolder

sly kindle Apr 3, 2020, 3:27 AM

#

grocy supports ingress anyway

shy girder Apr 3, 2020, 3:27 AM

#

sure, its not the best example

#

lets say ombi

#

setup through portainer

#

and i want my parents to access ombi through https://example.duckdns.org/ombi

#

which maps to 10.0.0.100:5000

#

nginx proxy manager custom locations should allow me to have just 1 proxy host with multiple locations.

#

https://example.duckdns.org/radarr
https://example.duckdns.org/jackett```

#

I was able to setup the root where https://example.duckdns.org/ redirects to https://example.duckdns.org:8123 or 10.0.0.100:8123, but none of the custom locations work like i was expecting

sly kindle Apr 3, 2020, 3:38 AM

#

I've only used cname for servers that were outside of HA

#

with my own domain

boreal mountain Apr 3, 2020, 4:38 AM

#

Where can I find a list of new add-ons?

sly kindle Apr 3, 2020, 4:39 AM

#

🤨

serene ivy Apr 3, 2020, 5:44 AM

#

morning all, just wondering how difficult it would be to implement https://github.com/Medisana/vitadock-api/wiki ?

weary stratus Apr 3, 2020, 5:49 AM

#

you want to do it, or just have an add-on you can use?

serene ivy Apr 3, 2020, 6:09 AM

#

Well, I'm not great with Python 🙂 (but if someone would show me some basics, I think i could help out) 🙂

#

I use their BP meter & Scale, would be great to add it to HA 🙂

weary stratus Apr 3, 2020, 6:23 AM

#

you can test this for the scale

#

https://play.google.com/store/apps/details?id=com.health.openscale.sync&hl=en

#

It speaks mqtt

serene ivy Apr 3, 2020, 8:36 AM

#

@weary stratus : Don't have android 😦

weary stratus Apr 3, 2020, 8:37 AM

#

sorry, but then I have no idea

gloomy star Apr 3, 2020, 1:13 PM

#

hi! people in #330944238910963714 told me to ask here 🙂 is it possible to run Andrew's Monitor Presence Detection System (monitor.sh) on HassOS or Supervised script install?

jade wing Apr 3, 2020, 1:14 PM

#

Yes

#

Running anything extra with Supervised requires an add-on 😉

gloomy star Apr 3, 2020, 1:14 PM

#

I know there is HACS addon

dense spadeBOT Apr 3, 2020, 1:14 PM

#

As an alternative to HA built-in bluetooth tracking, the monitor script uses separate devices, usually Pi Zeroes, to track bluetooth devices.
It uses MQTT topics to relay device status messages to HA. See this forum thread for more.

jade wing Apr 3, 2020, 1:14 PM

#

That forum thread has a link to an add-on, towards the end

gloomy star Apr 3, 2020, 1:14 PM

#

ahh, I see

jade wing Apr 3, 2020, 1:14 PM

#

HACS doesn't do add-ons though 😉

sly kindle Apr 3, 2020, 1:15 PM

#

HACS is everything "custom"...plugins and integrations

#

unofficial, unsupported

gloomy star Apr 3, 2020, 1:16 PM

#

there are AppDaemon Apps that have looks an implementation of the script but yeah

#

I could run the script let's say in a lxc container on proxmox pushing to mqtt that home assistant will be using for presence detection

#

more or less

jade wing Apr 3, 2020, 1:17 PM

#

Well, it's designed to run remote from HA anyway

#

Like putting a few Pi type devices around the house

#

I find the Orange Pi works really well for it

sly kindle Apr 3, 2020, 1:18 PM

#

there is also "room assistant" which is similar to Monitor

gloomy star Apr 3, 2020, 1:18 PM

#

if you need room presence detection then yes, I don't actually need it at this point since I don't don't plan on using room automations

#

but if I just want home/away, one will be fine I guess

#

thanks @sly kindle havent seen that, I'll take a look 🙂

sly kindle Apr 3, 2020, 1:19 PM

#

either one of those only becomes room presence if you put one in each room 🙂

#

https://www.room-assistant.io/

gloomy star Apr 3, 2020, 1:23 PM

#

fantastic, there is Docker guide for that! great way of learning more about Docker 🙂

sly kindle Apr 3, 2020, 1:23 PM

#

and there's an add-on as well

#

and there's a list in the intro docs of several similar projects

gloomy star Apr 3, 2020, 1:27 PM

#

thanks, fantastic suggestion..maaan, even if I'm starting from scratch and 6 months was a long time with a lot of changes, I'm sonehow pumped to be back tinkering with HA 🙂

trail gazelle Apr 3, 2020, 3:55 PM

#

Hi there, since the installation of the adguard addon, my ubuntu 18.04 LTS machine (Which run home assistant) has no more internet connectivity. The local network still working fine since I am able to ssh it. Could some one help me?
I am connected via ethernet, the hardware is an intel NUC8i5BEK2
https://hastebin.com/zifelufeso.coffeescript

weary stratus Apr 3, 2020, 3:57 PM

#

hey guys i been trying to connect ha to google home(google assitant) did all the steps but when i connect in de google home app i get a note saying couldent update settings..... any one knows what this is

sly kindle Apr 3, 2020, 3:57 PM

#

@trail gazelle https://github.com/hassio-addons/addon-adguard-home#installation #1 ?

trail gazelle Apr 3, 2020, 3:58 PM

#

Yeah, it should be the dns thing...

#

I tried this tips: https://i.imgur.com/8mQFNeW.png but got this error https://hastebin.com/xepoyoledo.pl

sly kindle Apr 3, 2020, 4:04 PM

#

you aren't using HA OS

#

You are running Ubuntu

trail gazelle Apr 3, 2020, 4:04 PM

#

right

sly kindle Apr 3, 2020, 4:04 PM

#

so you can't use that

trail gazelle Apr 3, 2020, 4:05 PM

#

I tried to ask on the ubuntu discord how to reset netwrok setting yesterday but didn't get any answers 😦

sly kindle Apr 3, 2020, 4:06 PM

#

Are you running desktop version or server ?

trail gazelle Apr 3, 2020, 4:07 PM

#

desktop but I have no display due to antoher problem so, everthing is done trought ssh right now.

sly kindle Apr 3, 2020, 4:07 PM

#

I'm not a desktop hater. Just asking

#

ah ok

#

on desktop you would just change the settings with the network manager in the ui or whatever it's called now

#

https://help.ubuntu.com/lts/serverguide/network-configuration.html

trail gazelle Apr 3, 2020, 4:08 PM

#

Yeah seems like ubuntu and/or the intel iris 655 doesn't like my new 5120x1400 display 😦

sly kindle Apr 3, 2020, 4:10 PM

#

looks like it is netplan

#

https://linuxconfig.org/how-to-configure-static-ip-address-on-ubuntu-18-10-cosmic-cuttlefish-linux

trail gazelle Apr 3, 2020, 4:15 PM

#

restore and wipe and older home assistant image wont fix my host system right ?

sly kindle Apr 3, 2020, 4:15 PM

#

no

#

well, it may not have adguard so possibly

#

setting your router to hand out dns as it did prior to using adguard should work

#

and then reboot Ubuntu

trail gazelle Apr 3, 2020, 4:17 PM

#

I did set my router to the default dns. all my other devices are correctly connected to internet.

#

I try a wipe and restore, only change was the ad guard thing because I see that pihole is deprecated.

sly kindle Apr 3, 2020, 4:18 PM

#

pihole is the same

#

in this regard

#

does ha dns info work in your console?

trail gazelle Apr 3, 2020, 4:19 PM

#

Never had trouble with pihole. It's rebooting after the wipe&restore

sly kindle Apr 3, 2020, 4:20 PM

#

I mean, it's the same in that static ip/dns needs to be set

trail gazelle Apr 3, 2020, 4:21 PM

#

Static Ip si set since the very first day I installer ubuntu, but I never fixed the dns.

royal holly Apr 3, 2020, 5:25 PM

#

Anyone else having problems with tp-link kasa and philips hue in combination with adguard?

latent marten Apr 3, 2020, 5:29 PM

#

I'm going through the DuckDNS config...I've created my account and generated my sub-domain. In the instructions, it says "In the DuckDNS add-on configuration, perform the following..." and lists out steps to specify the token and sub-domain...my question is, where is that configuration?

#

Am I supposed to add the provided lines to my configuration.yaml file? Or is there supposed to be a UI configuration?

sly kindle Apr 3, 2020, 5:30 PM

#

scroll down on the addon page

#

@latent marten

latent marten Apr 3, 2020, 5:31 PM

#

Ah, I see

#

The Config section

sly kindle Apr 3, 2020, 5:31 PM

#

and then there is some related configuration.yaml to configure

#

That would be the next step after the addon config, starting the addon, then watching the addon logs to see that the cert files are good.

latent marten Apr 3, 2020, 5:35 PM

#

So I don't change any of the default settings for the Lets Encrypt info?

#

Other than changing the terms from False to True

#

To be more specific, leave these...
certfile: fullchain.pem
keyfile: privkey.pem
?

sly kindle Apr 3, 2020, 5:36 PM

#

yep

latent marten Apr 3, 2020, 5:37 PM

#

And if I'm not changing those, should I enter the URL to my sub-domain as http or https?

sly kindle Apr 3, 2020, 5:37 PM

#

you fill in your token and domain

#

neither http or https should be included

latent marten Apr 3, 2020, 5:37 PM

#

Ah, I see

sly kindle Apr 3, 2020, 5:38 PM

#

it should look exactly like the example given on the page, but with your token and domain

latent marten Apr 3, 2020, 5:38 PM

#

Right

#

I missed that part with the domain

#

Would you recommend following the steps outlined here to get it set up the rest of the way?

#

https://www.home-assistant.io/docs/ecosystem/certificates/lets_encrypt/

sly kindle Apr 3, 2020, 5:41 PM

#

no. everything you need is in the instructions there

latent marten Apr 3, 2020, 5:41 PM

#

Ok...so now that I've set my DuckDNS config and saved...then what? And are there further instructions somewhere else?

#

You mentioned starting the service and checking logs...I did that, but don't see anything populated in the logs for the add-on

sly kindle Apr 3, 2020, 5:42 PM

#

hit the refresh button that you see down there

#

several times

latent marten Apr 3, 2020, 5:42 PM

#

Failed to get addon logs, [object Object]

#

Ok, first try did nothing. Second try returned that message...I'll do it several times

sly kindle Apr 3, 2020, 5:43 PM

#

I guess I should say "serveral times...with a pause in between" 😄

latent marten Apr 3, 2020, 5:44 PM

#

Am I waiting for the 300 second timer to run?

sly kindle Apr 3, 2020, 5:45 PM

#

📎 unknown.png

#

you should see something like this

latent marten Apr 3, 2020, 5:45 PM

#

My subsequent refreshes aren't turning up anything in the logs.

sly kindle Apr 3, 2020, 5:45 PM

#

It may be finished? What does it say?

latent marten Apr 3, 2020, 5:46 PM

#

What does what say

sly kindle Apr 3, 2020, 5:46 PM

#

the logs

latent marten Apr 3, 2020, 5:46 PM

#

The screen pane in the add-on page shows nothing

sly kindle Apr 3, 2020, 5:46 PM

#

is the addon started?

latent marten Apr 3, 2020, 5:46 PM

#

Just the "Log" header, empty space, then Refresh button

#

I hit Start a few mins ago...

#

Is there a way to verify that it actually started?

#

Or does it hurt to hit start again?

sly kindle Apr 3, 2020, 5:47 PM

#

"start" would be missing

#

if it started

#

and you would see "restart" in its place

latent marten Apr 3, 2020, 5:47 PM

#

Ah

#

Ok, so I guess it didn't start then

#

I'll try that again

#

There we go. Little indicator light turned from grey to green...and I now have Restart and Stop options

#

And now the log is showing me info

sly kindle Apr 3, 2020, 5:48 PM

#

I'll let you play around for a bit because describing every little thing is weird. Start it. Observe. Stop it. Observe. Get to know it.

#

All other addons you choose will behave similarly.

#

If you try to start an addon and it flashes red after you click it, check the logs on the System page to look for a reason.

#

(for future reference)

latent marten Apr 3, 2020, 5:50 PM

#

Good to know. The Start button did flash red when I first tried starting it...I just figured that was part of the normal behavior

sly kindle Apr 3, 2020, 5:52 PM

#

I've just noticed, the configuration instructions for http: are no longer present.

latent marten Apr 3, 2020, 5:54 PM

#

Does that have something to do with the entries needed in the configuration.yaml file?

#

I think I'm good with the add-on config...at least as far the log seems to indicate

#

Is there a document or webpage that has instructions for this setup?

#

I don't need to be spamming you here if these answers are somewhere else

sly kindle Apr 3, 2020, 5:55 PM

#

they used to be part of the instructions. I'm poking around to find when/why they were removed

latent marten Apr 3, 2020, 5:56 PM

#

Ok, thanks

sly kindle Apr 3, 2020, 6:02 PM

#

@latent marten very confused. I don't know where it went. But you need to edit configuration.yaml and add http: base_url: your_domain.duckdns.org ssl_certificate: /ssl/fullchain.pem ssl_key: /ssl/privkey.pem

#

Those two ssl_ lines more or less "enable" the ssl, and after a restart you will only be able to reach your frontend using https://

latent marten Apr 3, 2020, 6:05 PM

#

Does it matter where in the config.yaml I add those lines?

#

Does it matter where in the config.yaml I add those lines?

sly kindle Apr 3, 2020, 6:06 PM

#

it may already be present in your file

#

with a # in front of it

#

Find it?

latent marten Apr 3, 2020, 6:07 PM

#

Pulling up the file now...

#

Ok yep, the lines are there and commented out

#

Except for the ssl_certificate and ssl_key lines. Though I assume I can just manually add those without a problem

#

Also, this is what was already there for the base URL... base_url: example.duckdns.org:8123

#

I assume I can remove the 8123 from the end there?

#

And should I reboot HA after saving the config file?

#

Nevermind, I see your comment there saying after a restart

sly kindle Apr 3, 2020, 6:18 PM

#

@latent marten base_url isn't that important here.

#

the next step would be to forward 443 to 8123 on your router

latent marten Apr 3, 2020, 6:20 PM

#

Ok, I can figure that out

#

Anything else needed to get this up and running?

sly kindle Apr 3, 2020, 6:20 PM

#

is it running now?

latent marten Apr 3, 2020, 6:21 PM

#

When I enter the URL with https, I get "This site can't be reached"

#

But I haven't set up the port-forwarding yet, so I don't know if that is the reason why

sly kindle Apr 3, 2020, 6:22 PM

#

yes

#

well, for https://yourduckdomain anyway

#

you can still reach with https://local_ip_address:8123

latent marten Apr 3, 2020, 6:22 PM

#

Correct

sly kindle Apr 3, 2020, 6:22 PM

#

you'll see a warning

latent marten Apr 3, 2020, 6:23 PM

#

Uh

#

Wait. I haven't tried that with https

sly kindle Apr 3, 2020, 6:23 PM

#

if you are reaching it with http:// then your config isn't right

latent marten Apr 3, 2020, 6:23 PM

#

It's just been the cached URL

#

Ok so I guess I don't know which IP is being used for my current connection...ever since I set it up initially, it's always been homeassistant.local:8123

#

Running IP Config on my machine, the URL doesn't work with a specific IP address

#

Putting https:// in front of homeassistant.local:8123 does not work

lapis radish Apr 3, 2020, 6:30 PM

#

Hey guys, so I saw you can control your PC from HA dashboard

#

Anyone know how to do that here?

latent marten Apr 3, 2020, 6:31 PM

#

@sly kindle I figured out the IP that HA is using to connect. It resolves when I use http, but errors when I use https...so I must have something wrong in my config

sly kindle Apr 3, 2020, 6:36 PM

#

@latent marten a common thing people do is remove the # but they do not move http: itself over to the left, leaving it hanging out with a space in front of it

latent marten Apr 3, 2020, 6:37 PM

#

So the spacing matters?

dense spadeBOT Apr 3, 2020, 6:39 PM

#

@hoary storm posted a code wall, it is moved here --> https://paste.ubuntu.com/p/22knzKm7Wt/

hoary storm Apr 3, 2020, 6:40 PM

#

so, I installed and started this add-on today:
https://github.com/hassio-addons/addon-nut

#

config is above

#

it appears it's connected to my remote NUT server successfully

#

   0.004891    Logged into UPS APC_1500@192.168.4.5```

#

however, I can't figure out what to put in for the "host" in configuration.yaml

sly kindle Apr 3, 2020, 6:41 PM

#

@latent marten yes. and everything below http: needs two spaces indentation

hoary storm Apr 3, 2020, 6:42 PM

#

the add-on doesn't explain where to find it, just this example:
host: a0d7b954-nut

latent marten Apr 3, 2020, 6:42 PM

#

@sly kindle ok, so no space in front of http, and two spaces below it

#

Is it a general thing that spacing matters in configuration.yaml entries?

sly kindle Apr 3, 2020, 6:42 PM

#

exactly like I have further back in my example

#

Is it a general thing that spacing matters in configuration.yaml entries?
@latent marten absolutely. it's users' biggest gripe

#

Can't be tabs. Gotta be spaces

#

Other than that, it is pretty simple

#

It's like an Outline

hoary storm Apr 3, 2020, 6:44 PM

#

any ideas @dreamy mural @atomic tapir @raven tinsel ?

sly kindle Apr 3, 2020, 6:45 PM

#

oooh you don't wanna do that

raven tinsel Apr 3, 2020, 6:45 PM

#

Yes my lord

#

you rang?

hoary storm Apr 3, 2020, 6:45 PM

#

oh god, i'm scarred

#

😦

sly kindle Apr 3, 2020, 6:45 PM

#

MildPanic

hoary storm Apr 3, 2020, 6:45 PM

#

lolol

sly kindle Apr 3, 2020, 6:46 PM

#

you got his attention, you should ask.

hoary storm Apr 3, 2020, 6:46 PM

#

hah

#

so, frenck, on your new NUT add-on, when using the remote_ups_host option, how to I find the host that i put in configuration.yaml?

raven tinsel Apr 3, 2020, 6:48 PM

#

Supervisor panel -> Click on add-on. Look in your browser URL... it contains something like a0d7b954_nut

latent marten Apr 3, 2020, 6:48 PM

#

@sly kindle I bet the spacing is my issue. I need to step away for a little bit, but I'll fix that and let you know how it goes.
Thanks for your patience and your help.

raven tinsel Apr 3, 2020, 6:48 PM

#

replace the underscore _ with a dash -

#

and that would make the hostname

hoary storm Apr 3, 2020, 6:49 PM

#

ooooo, nice
got it, ty!

raven tinsel Apr 3, 2020, 6:50 PM

#

No problem, sir!

atomic tapir Apr 3, 2020, 6:50 PM

#

@hoary storm what’s the proper punishment here

#

For pinging three random admins

#

Just because we’re at the top of the sidebar doesn’t mean you can just ping us

hoary storm Apr 3, 2020, 6:51 PM

#

so, i just pinged you cause you were the contributors to the NUT add-on
sorry

atomic tapir Apr 3, 2020, 6:51 PM

#

Oh. Well I missed that. So my apologies and never mind

#

This never happens

raven tinsel Apr 3, 2020, 6:52 PM

#

This is nut(s)

hoary storm Apr 3, 2020, 6:52 PM

#

nah, it's prolly a foul on my end, i wasn't thinking, i was just trying to get this knocked out while on my lunch break

raven tinsel Apr 3, 2020, 6:52 PM

#

You should absolutely nut do that again 😉

hoary storm Apr 3, 2020, 6:52 PM

#

jajaja

raven tinsel Apr 3, 2020, 6:52 PM

#

😄

lapis radish Apr 3, 2020, 7:10 PM

#

Guys none of my add ons will start

#

And I have no idea why

#

any idea why?

#

I cant access samba or file editor also to see the logs

weary stratus Apr 3, 2020, 7:31 PM

#

when you start an add-on, there is a log window below. What does it state?

lapis radish Apr 3, 2020, 7:36 PM

#

it doesnt say anything

#

I press refresh and it doesnt do anything

sly kindle Apr 3, 2020, 7:36 PM

#

check the system page

#

when an addon doesn't start

lapis radish Apr 3, 2020, 7:36 PM

#

but if I delete and reinstall a plugin it woerks

sly kindle Apr 3, 2020, 7:37 PM

#

what's a plugin?

#

from HACS?

lapis radish Apr 3, 2020, 7:37 PM

#

sorry I mean an addon

sly kindle Apr 3, 2020, 7:42 PM

#

https://ptb.discordapp.com/channels/330944238910963714/672220642099200000/695718374600081459

haughty wagon Apr 3, 2020, 8:42 PM

#

HOLAA... Algien sabe como se configura LUTRON, para los registros

latent marten Apr 3, 2020, 8:54 PM

#

@sly kindle I've got a problem. I fixed my spacing in the file, and now http access no longer works (like you said). When I use https, then I get the warning, but I can get through. But now I need to enter my username/password. It's not taking my UN/PW combo, but I know it's right...so I did some digging for resetting a password, and when I try the command ha authentication reset --username "<username>" --password "<new PW>", I get a result of "Unknown Error, see logs"

#

The logs aren't very helpful (to me, at least). It's not something apparent that is the matter

sly kindle Apr 3, 2020, 9:23 PM

#

logs referred to there are the supervisor logs

#

I'm out running errands in a mask right now though 😷

dreamy mural Apr 3, 2020, 9:59 PM

#

@hoary storm The hostname will different between repositories. It is made up of the repo hash and the add-on name. Behind the scenes, it is actually the name of the Docker container.

hoary storm Apr 3, 2020, 10:07 PM

#

thanks dale3h! got that from Frenck

#

i'm still not getting home assistant to connect to the add on though

#

  name: "CyberPower 1500"
  host: a0d7b954-nut
  username: nutty
  password: changeme
  resources:
    - battery.charge
    - battery.runtime
    - ups.load
    - ups.status```

#

  - username: nutty
    password: changeme
    instcmds:
      - all
    actions: []
devices:
  - name: myups
    driver: usbhid-ups
    port: auto
    config: []```

#

shutdown_host: 'false'
shutdown_hassio: 'false'
remote_ups_name: APC_1500
remote_ups_host: 192.168.4.5
remote_ups_user: upsmon
remote_ups_password: upsmon1```

#

it's still looks like it's connecting to the NUT server fine:

   0.005419    Logged into UPS APC_1500@192.168.4.5```

#

but the logs say it's not connecting

#

Logger: homeassistant.components.sensor
Source: helpers/entity_platform.py:203
Integration: Sensor (documentation, issues)
First occurred: 5:01:42 PM (5 occurrences)
Last logged: 5:08:46 PM

Platform nut not ready yet. Retrying in 60 seconds.
Platform nut not ready yet. Retrying in 90 seconds.
Platform nut not ready yet. Retrying in 120 seconds.
Platform nut not ready yet. Retrying in 150 seconds.
Platform nut not ready yet. Retrying in 180 seconds.```

sly kindle Apr 3, 2020, 10:10 PM

#

@hoary storm sent the community addon discord invite to you

#

maybe users there who have experience with it

hoary storm Apr 3, 2020, 10:11 PM

#

oh crap, this is for official addons?

sly kindle Apr 3, 2020, 10:11 PM

#

generally...

#

no big deal

hoary storm Apr 3, 2020, 10:11 PM

#

hahaha, what a day

#

thanks 🙂

sly kindle Apr 3, 2020, 10:11 PM

#

just sharing another option

hoary storm Apr 3, 2020, 10:11 PM

#

yep yep, ty!

latent marten Apr 4, 2020, 2:14 AM

#

I am stuck on getting my router port forwarding set up correctly...any good resources anyone would recommend for troubleshooting?

latent marten Apr 4, 2020, 2:42 AM

#

I've been able to get it most of the way there by tinkering...now, when I enter https://<my domain>.duckdns.org, I get an error that it can't be reached.

#

BUT, if I go to https://<my domain>.duckdns.org:8123, it connects

#

I have no clue why

sly kindle Apr 4, 2020, 2:43 AM

#

you probably have forwarded 8123 to 8123, so the :8123 at the end is required

#

if you forward 443 to 8123 then you can drop the :8123

latent marten Apr 4, 2020, 2:45 AM

#

Can I enter screenshots here?

sly kindle Apr 4, 2020, 2:45 AM

#

now you can

latent marten Apr 4, 2020, 2:45 AM

#

📎 Capture.PNG

#

So should I fill that out as 443-443 for the global port range...and 8123 as the base?

#

Or other way around?

sly kindle Apr 4, 2020, 2:46 AM

#

base host s/b 8123

latent marten Apr 4, 2020, 2:46 AM

#

Ok

#

Should I also do a similar one for 80?

sly kindle Apr 4, 2020, 2:46 AM

#

not needed

latent marten Apr 4, 2020, 2:46 AM

#

Ok, so only this one for 443/8123 is needed

sly kindle Apr 4, 2020, 2:46 AM

#

yep

latent marten Apr 4, 2020, 2:47 AM

#

Here goes nothing...

sly kindle Apr 4, 2020, 2:47 AM

#

what you have working right now isn't wrong, it's just a matter of preference

#

you could forward 44234 to 8123 and then you would have to add :44234 at the end of your url

latent marten Apr 4, 2020, 2:48 AM

#

Sure. I'd prefer to not include the port number when typing the URL 🙂

sly kindle Apr 4, 2020, 2:48 AM

#

it's just that 443 is the default port for ssl/https

latent marten Apr 4, 2020, 2:48 AM

#

Well, I think I overdid it...I also had entries for 8123-8123/8123, and 80-80/80

#

Just taking shots in the dark

sly kindle Apr 4, 2020, 2:49 AM

#

some users like to use a more random port and include it at the end, because everyone knows what the default port is

#

but I was not one of those

latent marten Apr 4, 2020, 2:49 AM

#

Cool

#

Well the change worked

#

I can now successfully browse to https://<my-domain>.duckdns.org

#

Now, if you have some time to help with my other issue...my user account is apparently FUBAR

#

And I am not able to log in

sly kindle Apr 4, 2020, 2:51 AM

#

🤦

#

oh i think i saw that while I was out

latent marten Apr 4, 2020, 2:51 AM

#

Not sure if you saw my response earlier, but I checked the logs and it says my user account is unknown...which is baffling

sly kindle Apr 4, 2020, 2:51 AM

#

maybe you are getting the user account wrong?

latent marten Apr 4, 2020, 2:52 AM

#

I don't think so...I use a password manager to keep track of that stuff

sly kindle Apr 4, 2020, 2:52 AM

#

are you connected to the console?

latent marten Apr 4, 2020, 2:52 AM

#

And I had set up a secondary account, and I know FOR SURE I got that account right, and I still get the same message

#

Yes, I have the console up on my other screen

sly kindle Apr 4, 2020, 2:52 AM

#

enter "login"

latent marten Apr 4, 2020, 2:53 AM

#

k

#

I now have the "#" at the start of the line

sly kindle Apr 4, 2020, 2:54 AM

#

gimme a sec

latent marten Apr 4, 2020, 2:54 AM

#

Sure

sly kindle Apr 4, 2020, 2:57 AM

#

ok so if you now use more /mnt/data/supervisor/homeassistant/.storage/auth you should be able to see users

#

and you can confirm "username": "whatever"

#

(this is all this step is for)

latent marten Apr 4, 2020, 2:59 AM

#

Hmm, interesting

sly kindle Apr 4, 2020, 3:00 AM

#

see what you expect?

#

you can use ctrl+c to stop looking at that

#

and then "exit"

latent marten Apr 4, 2020, 3:01 AM

#

Not entirely...for my main "owner" user, the username is different than what appears in the UI. The secondary username matches what I expected

#

I'll try the auth reset with the username that appears here though

sly kindle Apr 4, 2020, 3:01 AM

#

then log back in to ha cli with "root"

#

and then run auth reset --username the-name-you-saw --password the-new-password

latent marten Apr 4, 2020, 3:03 AM

#

Username and password should be in quotes, yes?

sly kindle Apr 4, 2020, 3:03 AM

#

I just did a test without them

latent marten Apr 4, 2020, 3:04 AM

#

Fuck me

#

Sorry for swearing

#

It was the double quotes all along

#

GAHH

#

Wow

sly kindle Apr 4, 2020, 3:05 AM

#

lol

latent marten Apr 4, 2020, 3:05 AM

#

I am in. Thank you so much!

#

Well this has been an insightful day. Learned a lot more about router ports and port forwarding, and I now know what to do if I ever get locked out again

rough dirge Apr 4, 2020, 5:02 PM

#

Not really sure where to ask this, but this channel seems appropriate.
I'm getting started with HA, deploying with Docker on my RPi and I want to start adding the plugins/addons/custom components but I'm unclear on how to add all that stuff to the docker setup.
Do most people just build a custom image with whatever addons they want just copied into the image? and rebuild the image for each HA upgrade?

sly kindle Apr 4, 2020, 5:03 PM

#

@rough dirge You're either using HA which has docker built in, and uses its own template for containers (addons), or you are running and managing docker yourself.

rough dirge Apr 4, 2020, 5:04 PM

#

yea I'm running the docker containers myself

sly kindle Apr 4, 2020, 5:04 PM

#

If you're doing the latter, addons are whatever you find out there

rough dirge Apr 4, 2020, 5:04 PM

#

not hass.io

sly kindle Apr 4, 2020, 5:04 PM

#

You are re-inventing hass.io 🙂

rough dirge Apr 4, 2020, 5:04 PM

#

hassio is just a linux distro right?

sly kindle Apr 4, 2020, 5:05 PM

#

First, the term hassio was yeeted

#

It's just Home Assistant now

rough dirge Apr 4, 2020, 5:05 PM

#

lol what is yeeted

sly kindle Apr 4, 2020, 5:05 PM

#

It was tossed away

#

YEET

rough dirge Apr 4, 2020, 5:05 PM

#

hahaha

sly kindle Apr 4, 2020, 5:05 PM

#

YEET

#

~~hassio~~ is an ecosystem. It's an OS, docker, and Home Assistant running in a container. All the addons are other docker containers.

magic sparrow Apr 4, 2020, 5:08 PM

#

I need help..😩 I am attempting to get Duckdns addon installed and I keep getting error no matter what I do.

sly kindle Apr 4, 2020, 5:08 PM

#

@rough dirge https://ptb.discordapp.com/channels/330944238910963714/330944238910963714/674323391058280469

#

The supervisor container is like a docker orchestrator.

rough dirge Apr 4, 2020, 5:09 PM

#

so to summarize, if I'm deploying HA in a docker container, and I want to do addons, for example this Google Cal Component:
https://github.com/atomic7777/atomic_calendar
or this https://github.com/thomasloven/lovelace-auto-entities
Where it says for installation: put the js file in some local dir of the HA install which would be inside the docker container right?

sly kindle Apr 4, 2020, 5:09 PM

#

On your install you are probably going to use docker-compose, which isn't an orchestrator, but more like a config file

#

@rough dirge what you are talking about there is completely different

#

components are part of HA, custom components are unsupported additions to HA

#

and I should use "integrations" not "components"

#

Your config files are in some volume somewhere. You're going to have to learn more about docker for that

magic sparrow Apr 4, 2020, 5:13 PM

#

sorry go phone call. "Error creating new order :: Cannot issue for duckdns.org:8123": Domain name contains an invalid character",
"status": 400

sly kindle Apr 4, 2020, 5:13 PM

#

With ~~hassio~~ you are using docker, but you don't need to manage docker

#

@magic sparrow that's not your domain name

#

do you know your duckdns domain?

#

And it doesn't include :8123

magic sparrow Apr 4, 2020, 5:14 PM

#

yes I didn't add my name in that paste

sly kindle Apr 4, 2020, 5:14 PM

#

the port isn't part of your domain name

#

follow the example as shown in the docs

magic sparrow Apr 4, 2020, 5:15 PM

#

well that explains it

#

mindblown lol thank you. I am a newbie dummy.

#

Thank you

latent marten Apr 4, 2020, 5:49 PM

#

For the Samba share add-on, what are the hosts referenced in the instructions?

#

allow_hosts:

10.0.0.0/8
172.16.0.0/12
192.168.0.0/16

#

Are those generic IPs that I should copy/paste into mine? Or does those correlate to devices that I need to modify based on my setup?

sly kindle Apr 4, 2020, 5:50 PM

#

those are common subnets that a user would probably be using

#

what's your computer's ip address?

latent marten Apr 4, 2020, 5:51 PM

#

I believe it's 192.168.1.0...double-checking though

sly kindle Apr 4, 2020, 5:51 PM

#

so that would be covered by 192.168.0.0/16

latent marten Apr 4, 2020, 5:52 PM

#

Ok

#

So really, the only thing I need to change in the configuration for samba is the password. And the username if I want, but not necessary

sly kindle Apr 4, 2020, 5:52 PM

#

those allow most typical home network ranges, basically

latent marten Apr 4, 2020, 5:52 PM

#

Got it

sly kindle Apr 4, 2020, 5:52 PM

#

hardly anyone ever needs to add or change something there

#

yes, ~~username~~ password is required or it won't start

#

but I would recommend changing the user name too

latent marten Apr 4, 2020, 6:22 PM

#

Ok, I've got the Samba add-on up and running. I have a backup, but how do I now see that backup through Samba? Is there an interface to it?

sly kindle Apr 4, 2020, 6:23 PM

#

snapshots are in the /backup directory

#

you should see all the default directories over smb

latent marten Apr 4, 2020, 6:24 PM

#

Ok, I think that's the piece I'm missing...I don't have smb

sly kindle Apr 4, 2020, 6:24 PM

#

smb = samba

latent marten Apr 4, 2020, 6:24 PM

#

What did you do to be able to see your files through windows explorer like that?

sly kindle Apr 4, 2020, 6:25 PM

#

is that screenshare working? it fails on my end

#

that's why I keep deleting it lol

#

📎 unknown.png

latent marten Apr 4, 2020, 6:25 PM

#

Yeah, it's coming through

#

Coming and going lol

sly kindle Apr 4, 2020, 6:25 PM

#

ah there it is

latent marten Apr 4, 2020, 6:25 PM

#

I get the concept though...I just don't know how to set that up

sly kindle Apr 4, 2020, 6:26 PM

#

I was just seeing spinning squares and then the poop emoji

#

you enter the ip address in the bar at the top with two backslashes

#

\\192.168.1.248

dark yoke Apr 4, 2020, 6:26 PM

#

Are you tricking us with a never ending gif loading loop @sly kindle? 😄

sly kindle Apr 4, 2020, 6:27 PM

#

is that what you see too?

dark yoke Apr 4, 2020, 6:27 PM

#

Open in browser worked 🤷‍♂️

sly kindle Apr 4, 2020, 6:27 PM

#

I can see it now. But my first attempts failed

latent marten Apr 4, 2020, 6:28 PM

#

I get an error trying to access that IP through windows explorer

sly kindle Apr 4, 2020, 6:28 PM

#

it's your HA ip, but without the port at the end

latent marten Apr 4, 2020, 6:28 PM

#

Ah. My HA IP is different

sly kindle Apr 4, 2020, 6:28 PM

#

yeah that ip was mine lol

#

you want to use yours

latent marten Apr 4, 2020, 6:29 PM

#

Right

#

When I input my HA IP, I am prompted for a login...should my HA username/pw work there?

sly kindle Apr 4, 2020, 6:30 PM

#

whatever you configured in the samba addon

latent marten Apr 4, 2020, 6:30 PM

#

Ahh, samba un/pw

sly kindle Apr 4, 2020, 6:30 PM

#

yes, what you are doing now is "using samba"

#

to connect to your HA server

#

the shared directories anyway

latent marten Apr 4, 2020, 6:31 PM

#

Ok, I get it now. And I am in and see my backup

sly kindle Apr 4, 2020, 6:32 PM

#

and now you can right click on any of those folders, and choose "pin to quick access" or you can map them

latent marten Apr 4, 2020, 6:32 PM

#

Right, makes sense

#

So on a separate but tangentially-related note, my next project is to take a stab at this...https://github.com/FutureTense/lock-manager

GitHub

FutureTense/lock-manager

Home Assistant Zwave Lock Manager package. Contribute to FutureTense/lock-manager development by creating an account on GitHub.

#

The first step in the instructions there talks about adding a packages directory. So that there is a path of .../homeassistant/packages/lockmanager

#

Would this be an interface to add those directories? Or should I do that somewhere else?

sly kindle Apr 4, 2020, 6:36 PM

#

A quick browse makes me think yes?

latent marten Apr 4, 2020, 6:41 PM

#

When editing the configuration.yaml in Windows, is it necessary to open the file as administrator?

#

Or will changes be effectively saved without editing as administrator

jolly moth Apr 4, 2020, 7:32 PM

#

@woeful sun , are you in here?

sly kindle Apr 4, 2020, 7:37 PM

#

@jolly moth that is not the same whiskerz as the proxmox whiskerz

jolly moth Apr 4, 2020, 7:37 PM

#

ahhh

#

you're a mind reader

#

@woeful sun, never mind.....you're not the whiskerz I seek....

magic sparrow Apr 4, 2020, 9:59 PM

#

I have installed duckdns addon. I can connected with my ipad to the companion just fine but my iphone times out and will not connect. If I shut off wifi I can connect externally but on internal network it will not work. Any thoughts on what could be the issue? Thankyou.

latent marten Apr 5, 2020, 2:09 AM

#

@magic sparrow I am in a similar boat. Not sure if there is a way to config around that, but I've resorted to two types of connections: local and external. When local, I connect to https://[IP of HA device]:8123. Externally, I go to https://[my-domain].duckdns.org

magic sparrow Apr 5, 2020, 2:26 AM

#

I been searching the net for answers. What I do notice is that I get Notification "Login attempt or request with invalid authentication" in HA. I can connect with my local IP from my computer. By restoring your connections did if fix your issue? @latent marten

latent marten Apr 5, 2020, 2:29 AM

#

So the issue with your iphone? But your ipad connects just fine?

#

And you're using the HA app, or a web browser?

magic sparrow Apr 5, 2020, 2:36 AM

#

My Ipad connects with HA app but will not in browser. My iphone will not connect either way

latent marten Apr 5, 2020, 2:37 AM

#

Check the Home Assistant URL you have set in the app...sounds like it is different in your ipad vs the iphone

magic sparrow Apr 5, 2020, 2:37 AM

#

If I disable my wifi then my iphone will connect using the external duckdns url

latent marten Apr 5, 2020, 2:38 AM

#

Right, that sounds like the exact same behavior I have. It has something to do with being connected to same network.

#

You should be able to get around that. To test, make sure you are connected to wifi, and in your browser, enter https://[IP address of HA]:8123. For me, that connects. I expect it will for you, too.

magic sparrow Apr 5, 2020, 2:39 AM

#

for what ever reason it seems like my ipad is able to use the extenal address to still connect when using the app.

#

If i type my internal address https:192.168.xxx.xx:8123 in my iphone it brings up the HA login but when I enter my login information it says unable to connect to home assistant

latent marten Apr 5, 2020, 2:42 AM

#

Are you certain you have your username and password correct?

magic sparrow Apr 5, 2020, 2:43 AM

#

Then I get notification on my computer in HA with authetication. I have checked my login and password looks good. It works fine on my PC

#

and works fine when logging in externally

latent marten Apr 5, 2020, 2:44 AM

#

It works fine on your PC...meaning if you log out, then log back in with the same credentials, you are able to log in?

magic sparrow Apr 5, 2020, 2:44 AM

#

correct

#

I don't know I am frustrated. I am a newbie to all this. still trying to make sense of it all. Everytime i do something I brake something else and have to fix it. 😋

latent marten Apr 5, 2020, 2:46 AM

#

I'm right there with you

#

I actually got this aspect of things resolved last night. And I also had troubles with my username/password, but that's because I had the wrong info. I was able to reset it though, and I've been fine since.

#

Do you have console access?

#

HA console access

#

Like a command prompt screen

magic sparrow Apr 5, 2020, 2:49 AM

#

Just did a sanity check. Logged out cleared cache in browser and logged back in using my credentials.

latent marten Apr 5, 2020, 2:50 AM

#

On PC or iPhone?

magic sparrow Apr 5, 2020, 2:50 AM

#

I have HA installed on windows machine with oracle VM with ubuntu. Do you mean that console?

#

on my PC just to verify my credentials

latent marten Apr 5, 2020, 2:51 AM

#

OK...and just to double-check sanity again, those exact same credentials do not work when trying to log in via the browser in your iphone?

magic sparrow Apr 5, 2020, 2:51 AM

#

correct

latent marten Apr 5, 2020, 2:52 AM

#

Have you been able to log in via the browser on your iphone before?

magic sparrow Apr 5, 2020, 2:54 AM

#

yes before I installed duckdns addon it worked fine. I just didn't have external access. now I have external access and no internal. raised_eye

latent marten Apr 5, 2020, 2:54 AM

#

Right

#

But your ipad, connected to the same network and same credentials, does log in via browser?

#

For internal access

magic sparrow Apr 5, 2020, 2:56 AM

#

The HA app works on Ipad. trying to log in through web browser i get same message as Iphone

sly kindle Apr 5, 2020, 3:07 AM

#

@magic sparrow you cant reach https:// local_ip:8123 without hitting a warning

#

Right?

magic sparrow Apr 5, 2020, 3:10 AM

#

yes I hit advanced it proceeds to HA login then fails to connect after I enter my credientials. @sly kindle

sly kindle Apr 5, 2020, 3:11 AM

#

You're not getting a 403 or anything?

magic sparrow Apr 5, 2020, 3:16 AM

#

No

sly kindle Apr 5, 2020, 3:21 AM

#

@magic sparrow have you added any auth providers to your configuration.yaml ?

magic sparrow Apr 5, 2020, 3:23 AM

#

don't think so. all i have added is the url for duckdns and ssl info

sly kindle Apr 5, 2020, 3:24 AM

#

Can you reach your https://duckdns address ok?

#

from inside your network

magic sparrow Apr 5, 2020, 3:32 AM

#

hmm nope it timed out. but I can ping my duckdns address @sly kindle

sly kindle Apr 5, 2020, 3:33 AM

#

I would just disable https so you can get in

#

comment out the two ssl_ lines under http: in your config and restart.

#

then it's back to normal

magic sparrow Apr 5, 2020, 3:34 AM

#

would that prevent my external connection from working?

sly kindle Apr 5, 2020, 3:34 AM

#

is it working now?

magic sparrow Apr 5, 2020, 3:37 AM

#

should I leave the base url?

sly kindle Apr 5, 2020, 3:37 AM

#

base_url won't matter here

#

you can comment it out or leave it

latent marten Apr 5, 2020, 3:38 AM

#

@sly kindle how hard is it to set up so that you can access the external URL from an internal connection?
Right now, when I'm on a device connected to my network, I cannot reach the duckdns url, but I can connect through the local IP (after clicking through the warning).
I'm not overly concerned about that, but am curious if it's an easy change or not

sly kindle Apr 5, 2020, 3:39 AM

#

your router probably does not support hairpin/loopback NAT

latent marten Apr 5, 2020, 3:40 AM

#

Ah

magic sparrow Apr 5, 2020, 3:40 AM

#

commenting that out now it won't reconnect at all

#

Does USG router support that?

sly kindle Apr 5, 2020, 3:41 AM

#

are you using http://local_ip:8123?

#

you can't use https:// now

#

yes USG should be fine

magic sparrow Apr 5, 2020, 3:42 AM

#

ok back in let me try from my phone now

#

that worked

sly kindle Apr 5, 2020, 3:43 AM

#

you can both use Nginx Proxy Manager as an alternative to secure your duckdns url. Then you get https:// with duckdns, and http:// with the local_ip

magic sparrow Apr 5, 2020, 3:44 AM

#

so now I need to point HA companion to that url and I will be back to square one before I installed duckdns

sly kindle Apr 5, 2020, 3:44 AM

#

Yeah, you can't provide the app or many other things the local_ip address when you're using ssl

#

from duckdns addon

#

None of those things can "click on advanced"

#

they just don't get through

magic sparrow Apr 5, 2020, 3:45 AM

#

so back the using the USG to harpin. Is that an easier option?

sly kindle Apr 5, 2020, 3:46 AM

#

You shouldn't need to change anything on the USG

magic sparrow Apr 5, 2020, 3:46 AM

#

then my next thing to try is what you suggested. (Nginx)

sly kindle Apr 5, 2020, 3:47 AM

#

You would leave things as they are in your config. In the duckdns addon you would set accept terms to false.

#

Then install Nginx Proxy Manager

#

You would forward 443 to 443 and 80 to 80 in your router

magic sparrow Apr 5, 2020, 3:48 AM

#

so leave ssl commented out and set to false. then install proxy manager. got it Thank you so much. hopefully that doesn't cause me and heart ache. 🙂

sly kindle Apr 5, 2020, 3:50 AM

#

📎 unknown.png

magic sparrow Apr 5, 2020, 3:52 AM

#

so I can remove the port forward to 8123

sly kindle Apr 5, 2020, 3:52 AM

#

Yep. Then back in Nginx Proxy Manager, you create a new proxy host

#

📎 unknown.png

#

nginx does the forwarding

#

for 8123

magic sparrow Apr 5, 2020, 3:55 AM

#

ahh ok

sly kindle Apr 5, 2020, 3:55 AM

#

and in that SSL tab, you set your domain to get certificates

#

then save

#

and it might take a minute to get the certificate

#

but it should eventually show up as green and online like this

#

📎 unknown.png

#

And that's it. After that https://yourdomain should work, and the local ip address can by used as usual (http) with no warning

#

Set nginx proxy manager to start at boot, of course

latent marten Apr 5, 2020, 3:59 AM

#

In that case, are you able to use the app to connect both externally and locally? Or just one or the other?

magic sparrow Apr 5, 2020, 4:00 AM

#

ok we let me get to work. 😋

sly kindle Apr 5, 2020, 4:00 AM

#

either one

#

@latent marten

#

though you may still have the issue with using the external address from inside your network

#

because of the loopback thing

latent marten Apr 5, 2020, 4:01 AM

#

Right

#

Based on that, I don't see the benefit for me in setting up a proxy like that...at the end of the day, I'd still be using a web browser to connect from home, and the app when away from home.

#

Which is a totally adequate solution for my needs. Just thinking it through

sly kindle Apr 5, 2020, 4:07 AM

#

It can be handy if you have other servers. So you could have plex.yourduckdns.duckdns.org securing and forwarding to a different service and port, or sonarr, radarr, etc

#

And you don't have to open up those ports on your router

latent marten Apr 5, 2020, 4:07 AM

#

Well....at this point, I have no plans to dive that deep into this.

#

My needs, at this point, are much simpler 🙂

sly kindle Apr 5, 2020, 4:08 AM

#

Ha. Those were things I had going on before I used HA

#

So just kind of a side benefit of the addon

latent marten Apr 5, 2020, 4:08 AM

#

Sure, makes sense

sly kindle Apr 5, 2020, 4:10 AM

#

And before HA has this ingress feature, each addon used its own port, and I was looking for a way to make those secure without having to forward each in my router. But now that's no longer an issue, because any of the addons which support ingress work behind 8123.

mint python Apr 5, 2020, 4:11 AM

#

hi all, does anyone know if it is possible to increase the shm-size of an add on>

magic sparrow Apr 5, 2020, 4:12 AM

#

In the log I get this message. "sed: bad option in substitution expression"

sly kindle Apr 5, 2020, 4:12 AM

#

@mint python That's not something I've ever had to consider

#

what is going on?

#

@magic sparrow where is this?

magic sparrow Apr 5, 2020, 4:13 AM

#

in the NGIX log after I hit start

sly kindle Apr 5, 2020, 4:14 AM

#

oh you know what? it requires mariadb addon now

#

I kinda forgot about that. That's new

magic sparrow Apr 5, 2020, 4:15 AM

#

UGH. an addon for an addon

sly kindle Apr 5, 2020, 4:16 AM

#

yeah...

#

though the mariadb addon is a good upgrade from the default sqllite db HA uses

magic sparrow Apr 5, 2020, 4:17 AM

#

so how would one know that you needed that addon? It seems I spend hours chasing my tail.

mint python Apr 5, 2020, 4:19 AM

#

@sly kindle I am wanting to use Local real time person detection (https://community.home-assistant.io/t/local-realtime-person-detection-for-rtsp-cameras/103107). Mories76 has made an add-on for this (https://github.com/mories76/ha-addon-frigate) but one of the issues i face is that i cant increase the shm-size, apparently it needs to be 512MB or 1G. In a docker run command Blake notes that the following should be included "--shm-size=512m" but i cant set this anywhere for the add on. could I make any necessary changes through the portainer add-on?

magic sparrow Apr 5, 2020, 4:19 AM

#

being new to this what is difficult is how quickly things have changed so I have to be careful what I am reading because the date on articles makes a huge difference.

sly kindle Apr 5, 2020, 4:20 AM

#

very true

#

@magic sparrow The link at the top of the addon's page goes directly to the docs for any addon

#

And that's where you would see this info for NGINX

#

Down the page in the installation section: https://github.com/hassio-addons/addon-nginx-proxy-manager#installation

magic sparrow Apr 5, 2020, 4:21 AM

#

👍

toxic atlas Apr 5, 2020, 6:20 AM

#

Hello Everyone, I am trying to setup influxdb and grafana add-on on hassio to visualize some of my sensor metrics. Installed the addon Influxdb and created home_assistant database and updated configuration.yml with infulxdb:

#

I am unable to see any logs on influxdb

#

how to confirm/verify if my home-assistant started pushing logs to influxdb, so that I can start doing grafana visualization ?

#

Thanks in advance. any help, much appreciated !!

toxic atlas Apr 5, 2020, 7:24 AM

#

nevermind, I figured it out, should be using explore option on InfulxDB

lean gorge Apr 5, 2020, 8:14 AM

#

Im trying to get the Nginx Proxy Manager addon to work. 443/80 forwarded to 443/80 on my homeassistant raspberry pi. When I configure Proxy Manager as shown in the animated gif (forwarding my domain name to http://ipaddress:8123), I get

540 upstream prematurely closed connection while reading response header from upstream

lean gorge Apr 5, 2020, 8:47 AM

#

...never mind. I got it to work 🤦‍♂️

#

restarting Proxy Manager after configuration change (as documented) actually helps 🤷‍♂️

remote pond Apr 5, 2020, 9:27 AM

#

welppp.. been trying to access my HA config folder via samba share the whole day...newb here btw. getting this on the log check_ntlm_password: "Authentication for user [xxx] -> [xxx] FAILED with error NT_STATUS_WRONG_PASSWORD, authoritative=1"

#

SMB 1 enabled... used the password I've set on samba config....all file sharing options enabled..any ideads anyone??

severe urchin Apr 5, 2020, 11:03 AM

#

Is it possible to run dual addons? I would like to run two instances of deconz (two sticks) - any mods to allow that?

woeful river Apr 5, 2020, 11:11 AM

#

hello i am trying to install duck dns add-on on home assistant (hassio) but without success, can you tell me what is the procedure? too many obsolete tutorials

dark yoke Apr 5, 2020, 11:11 AM

#

Click "install" on the add-on

woeful river Apr 5, 2020, 11:14 AM

#

yes but after.. router, configuration.yaml and nginx ssl..

dark yoke Apr 5, 2020, 11:15 AM

#

that 100% depends on your setup.
and if you are unsure, you should probably not do it.
cloud: might be a better option for you

woeful river Apr 5, 2020, 11:16 AM

#

mildpanic

heady gate Apr 5, 2020, 2:25 PM

#

Hey Fellas! Who uses the BitWarden addon? I'm struggling to setup users. It says invites are sent but I can't find the emails it's sending (if it is sending). And when I try to create an account nothing happens after I hit "submit".

#

oooh, looks like it's an ssl problem. https://community.home-assistant.io/t/home-assistant-community-add-on-bitwarden-rs/115573/10

#

I'm still reading... the answer is probably there.

#

well, maybe BitWarden RS is beyond my ability currently. Shelving it for now.

lyric patio Apr 5, 2020, 2:50 PM

#

HI all - I've used zigbee2mqtt a while ago, to give that a try. I've disabled it again, and now playing with zwave2mqtt. The zigbee device is still there. How can i remove it?
I can publish a message like this :'mosquitto_pub -h 127.0.0.1 -p 1883 -t "homeassistant/sensor/0xd0cf5efffe279f57/config" -m ""' ; and this is seen as a remove, but i get an error.

#

2020-04-05 15:45:22 INFO (MainThread) [homeassistant.components.mqtt.discovery] Component has already been discovered: sensor 0xd0cf5efffe279f57 linkquality, sending update
2020-04-05 15:45:22 INFO (MainThread) [homeassistant.components.mqtt] Got update for entity with hash: ('sensor', '0xd0cf5efffe279f57 linkquality') '{}'
2020-04-05 15:45:22 INFO (MainThread) [homeassistant.components.mqtt] Removing component: sensor.0xd0cf5efffe279f57_linkquality
2020-04-05 15:45:22 WARNING (MainThread) [homeassistant.helpers.dispatcher] Unable to remove unknown dispatcher <function MqttDiscoveryUpdate.async_added_to_hass.<locals>.discovery_callback at 0x7f0eb4b968c0>

#

Oh, i see i pasted the wrong command. It wanted to paste this: mosquitto_pub -h 127.0.0.1 -p 1883 -t "homeassistant/sensor/0xd0cf5efffe279f57/linkquality/config" -m ""

left flame Apr 5, 2020, 3:26 PM

#

I'll post this in here since I think/hope it'll be related to the Samba Share add-on. Can I plug an external USB HDD to my RPi4 and have it available as a share on my network? I found loads of information about booting from other drives but I just want it mounted and available as a share on my network.

gloomy star Apr 5, 2020, 5:48 PM

#

ok..I think I need help..I tried setting up Andrews monitor.sh script and I'm failing big time..first I tried LXC container on Proxmox..well, doesn't seem to work, I passed USB to the container and I see it after calling lsusb, but hciconfig fails..then I tried Docker, but the images are either old or not working..lastly I tried setup the script on regular VM (that runs Docker for me) and I'm getting fatal mqtt error..argh..

latent marten Apr 5, 2020, 7:10 PM

#

I've added the Terminal and SSH add-on. I installed and went through the basic config, but was expecting to be prompted for a username/password (per instructions to login with root and credentials i set up). I was not prompted for login...what did I do wrong?

sly kindle Apr 5, 2020, 7:11 PM

#

@latent marten if you're using the web ui terminal that happens through HA

#

(ingress)

#

If you use an ssh client it will ask for user and pass

#

or it will use keys

latent marten Apr 5, 2020, 7:11 PM

#

Yes...after starting the add-on, I clicked the option to open the Web UI

#

So the authentication has already happened by using that method?

sly kindle Apr 5, 2020, 7:12 PM

#

yeah, so the majority of ingress enabled addons are using your HA credentials automatically

latent marten Apr 5, 2020, 7:12 PM

#

Ok

sly kindle Apr 5, 2020, 7:13 PM

#

Any addon where you'd expect it to ask for a user/pass and it isn't, is working that way. But if you specify a different port in the addon's network config section, you should be prompted for user/pass when connecting directly to that port

latent marten Apr 5, 2020, 7:15 PM

#

OK...also, for the port 22 do I need to set up a rule on my router for that?

sly kindle Apr 5, 2020, 7:16 PM

#

No. Unless you wanted to access it without using the web ui option from outside your network.

#

I wouldn't do that though.

latent marten Apr 5, 2020, 7:17 PM

#

Ok. So in the configuration for the add-on, I don't need to touch the Network section? For reference, it shows 22/tcp disabled

sly kindle Apr 5, 2020, 7:17 PM

#

you will want to add 22 there where it says disabled

#

if you want to access it using Putty or some other client

#

It's basically "web ui only" when that port is disabled

magic sparrow Apr 5, 2020, 7:18 PM

#

Hi all. So I ditched the duckdns addon and went with wireguard vpn to access HA externally. Seems to work ok. I can't however browse the internet through my VPN with wireguard . I can only connect to HA via the companion or url.

latent marten Apr 5, 2020, 7:19 PM

#

Ok. As long as that only controls access and not functionality, I have no problem using the web ui.

sly kindle Apr 5, 2020, 7:19 PM

#

I would add 22 there : )

#

You may have some issue where you can't reach the frontend, And the tools via the ssh addon are handy

gloomy star Apr 5, 2020, 7:19 PM

#

is anyone using decently working presence detection? I tried monitor.sh, room assistant, bt and I get mixed results with them..and I don't want anything fancy like room detection or automations..just simple home/away 😦

sly kindle Apr 5, 2020, 7:20 PM

#

you don't need anything fancy like monitor.sh for simple home/away

#

There's the android/ios apps for HA, or gpslogger, life360, owntracks, your router may possibly have an existing integration, nmap, any of these

#

Life360 is pretty good on both android and iphone

#

Plus you can then set automation for when someone arrives at work, or school, etc

#

not limited to just home/away

gloomy star Apr 5, 2020, 7:23 PM

#

I tried nmap and for whatever reason I felt that while I had it on, my phone battery was draining noticeably faster

#

I can look at life 360

sly kindle Apr 5, 2020, 7:23 PM

#

I've tried almost all of the above. I've got life360 now on the family phones and no one is complaining

#

I also like gpslogger for the android phones previously

gloomy star Apr 5, 2020, 7:24 PM

#

also maybe see if how OpenWRT integration works

#

I might see both

#

all depends on the battery drain for me..

sly kindle Apr 5, 2020, 7:25 PM

#

But with life360 you can add family members through the app and it's pretty handy. When we were trying it out my son was also learning to drive and there was "speeding" and "hard braking" info through the app, but those details eventually expire without using the paid version

gloomy star Apr 5, 2020, 7:26 PM

#

I acttually had a lot of luck with just bluetooth tracker back when I had the Pi

sly kindle Apr 5, 2020, 7:26 PM

#

The basic functionality continues to work with life360 without the paid version though

gloomy star Apr 5, 2020, 7:26 PM

#

but now for some reason it does not work that well

sly kindle Apr 5, 2020, 7:26 PM

#

I just continue to despise bluetooth. 😬 Don't know why

gloomy star Apr 5, 2020, 7:26 PM

#

😉

#

looking at the tiers..the free one actually has all I would need

sly kindle Apr 5, 2020, 7:27 PM

#

Every time I give it a chance...I hate bt speakers, bt soundbar, bt on the pi was a pain for me so I killed it. I keep trying it every now and then though

gloomy star Apr 5, 2020, 7:28 PM

#

but you're saying that details expire?

sly kindle Apr 5, 2020, 7:28 PM

#

@gloomy star it also has an easy integration with HA, so it's a good one to start with to get the feel of presence detection with HA

#

No the extra details were the "speeding" and so on info which would appear for my son

#

those expire, and I think the number of zones expire

#

but you can do zones through HA so those don't matter

#

Ui integration

#

📎 unknown.png

#

anyway, none of this is really #add-ons-archived 😄

#

more #integrations-archived

gloomy star Apr 5, 2020, 7:42 PM

#

ok, I'll take a look, thanks

#

last thing, do each of the family members has to setup and account and then they are somehow tied together

#

or I setup mine and generate family members from there?

#

ok, I already know, thanks

heady thicket Apr 5, 2020, 8:13 PM

#

Can anyone help me configuring Plex with HassIO on pi 4? I have it configured and had plugged in my USB external hard disk into my pi. But I am unable to see my hard disk volume as a directory in plex.

woeful thicket Apr 5, 2020, 8:47 PM

#

@heady thicket I'm not sure how plex works as hassio plugin, but I think you need to check if the drive is available inside the addon container first

magic sparrow Apr 5, 2020, 9:18 PM

#

hmmm. dark sky broke. custom element doesn't exist: weather-card. is this due to apple aquisition?

magic sparrow Apr 5, 2020, 9:34 PM

#

hmm it came back to life after some lunch.

vivid pewter Apr 6, 2020, 12:07 AM

#

Hey, how is everyone in their solitary confinement?

My nginx addon is saying I don't have a relevant user data when I try login... Anyone know why this may have happened all of a sudden?

radiant pumice Apr 6, 2020, 1:54 AM

#

good night. I need help, I'm a beginner and sometimes I don't know what to do, I installed the add on glances by the home assistant and generated the error that is in the images, I have a raspberry pi4 installed on it with apt-get and it's working only. but I haven't

round path Apr 6, 2020, 2:37 AM

#

I'm having trouble finding the Blue Iris install video for HA. Can someone point me to it?

brave current Apr 6, 2020, 7:58 AM

#

Is there a way to develop addons using the VSCode addon? So I'm able to develop local addons only using web UI? @raven tinsel maybe?

dark yoke Apr 6, 2020, 8:01 AM

#

it has access to the "addons" dir, so yes, you could
But it does not have docker access, so troubleshooting might be hard.

raven tinsel Apr 6, 2020, 8:35 AM

#

☝️ @brave current Alternatively, you can have the SSH & Web Terminal community add-on on the side to solve that issue

#

But yeah, it is possible (although suboptimal imho)

brave current Apr 6, 2020, 8:50 AM

#

Thanks for the info, then I'll try tp set everything up. I just wanna try some things, so I hesitate to do a full blown solution for now.

vivid pewter Apr 6, 2020, 1:26 PM

#

Hey, how is everyone in their solitary confinement?

My nginx addon is saying I don't have a relevant user data when I try login... Anyone know why this may have happened all of a sudden? This seems to have happened after I have restored a snapshot on a new install of 'home assistant'.

What's weird though, is all the existing proxy's still work, just when I login to the management interface, there is nothing there!

It would seem like this is an issue with mariaDB not restoring after snapshot... ugh.

(Sorry for the same question again, I didn't get any answers from 12 hours ago)

gloomy star Apr 6, 2020, 6:00 PM

#

I'm having strange error when setting up simple layout-card, I don't see it reported or something..is this something known?

#

here is error I am getting in dev tools console and raw config for the page
https://hastebin.com/cekoqigefo.bash

#

as you see it's really just a glance card with one entity

#

from the weeor and my understanding..it fails on rendering the + fab at the bottom when using layout card in panel mode

sly kindle Apr 6, 2020, 6:22 PM

#

@gloomy star you probably want #frontend-archived

#

add-ons are things you install from the add-on store

gloomy star Apr 6, 2020, 6:22 PM

#

heh, I'm always picking wrong rooms..

stiff current Apr 6, 2020, 6:37 PM

#

Heyo. I searched a while in the documentation but i didnt find.
Which data do i have to deliver when i want to start the letsencrypt addon as an action via "hassio.addon_start"?

sly kindle Apr 6, 2020, 6:41 PM

#

  data:
    addon: "core_letsencrypt"```

stiff current Apr 6, 2020, 6:42 PM

#

Many thanks! its the string that i find in the address bar, right?

sly kindle Apr 6, 2020, 6:43 PM

#

"core_letsencrypt", or whatever addon slug name you see in the navigation bar of your browser

#

yes

stiff current Apr 6, 2020, 6:43 PM

#

Thanks

weary stratus Apr 6, 2020, 7:19 PM

#

Hi folks, my Maria DB refused to update from v2 to v2.1.1. In the supervisor logs I see:
20-04-06 17:05:52 WARNING (MainThread) [supervisor.addons.addon] Add-on core_mariadb new schema is not compatible
20-04-06 17:05:52 WARNING (MainThread) [supervisor.tasks] Add-on core_mariadb will be ignored, schema tests fails

Should I report that somewhere?

gloomy star Apr 7, 2020, 8:19 AM

#

is there a difference (in terms of if I should not put this on the card for performance, etc) if I do in the button-card
[[[ return (states['fan.xiaomi_miio_device'].attributes.speed === 'Auto') ]]]
or I make a sensor with template_value and use it in entity

mint crane Apr 7, 2020, 9:08 AM

#

hi! do you really recommend switching from Pi-hole to AdGuard? never tried it out, though it looks like it does exactly the same thing. Any reviews?

strong atlas Apr 7, 2020, 10:26 AM

#

hey guys

#

what version is mqtt in the official addon

#

mosquitto

dark yoke Apr 7, 2020, 10:31 AM

#

it's not pinned, so whatever was latest on alpine when the image was created

strong atlas Apr 7, 2020, 10:43 AM

#

thanks

fluid sage Apr 7, 2020, 11:35 AM

#

I can only get the Unifi-controller to run if I add +1 to almsot each port - will this be an issue? https://imgur.com/a/a6WCZVq

weary stratus Apr 7, 2020, 11:43 AM

#

Hi colleagues, this is my first message here, I am quite new with hassio and docker, but I have quite good knowledge about linux/networking. I have a problem with Dnsmasq Add-On. When I want to start it I have an error like this:
20-04-07 08:50:23 ERROR (SyncWorker_9) [supervisor.docker] Can't start addon_core_dnsmasq: 500 Server Error: Internal Server Error ("driver failed programming external connectivity on endpoint addon_core_dnsmasq (5d9a58ea6b17b9e0ed934228c44908d253b4993fff39b9e705123912dd4da328): Error starting userland proxy: listen tcp 0.0.0.0:53: bind: address already in use")
I assume that this Add-On wants to start on 53 DNS port where hassio_dns container is working, do you know how this issue can be solved ?

many thanks in advance!

fallen marsh Apr 7, 2020, 11:57 AM

#

@weary stratus I have very similar problem, guys could you help us?

sly kindle Apr 7, 2020, 11:58 AM

#

@weary stratus if you chose your own OS then that's the place to start

#

@fallen marsh

weary stratus Apr 7, 2020, 11:59 AM

#

Ubuntu server 18.04 LTS server

sly kindle Apr 7, 2020, 12:02 PM

#

@weary stratus https://discordapp.com/channels/330944238910963714/672220642099200000/672834942471766033

#

it isn't coredns which is the conflict, but systemd-resolved

weary stratus Apr 7, 2020, 12:08 PM

#

thank you veru much, i will investigate it and I will come back with info, I thought, that this i sbecause hassio_dns, many thanks!

weary stratus Apr 7, 2020, 3:28 PM

#

Hi, works, thank you, now I can run hassio internal and external, but only in web browser, I am not able to configure application, do you have any idea how to ?

worthy geyser Apr 7, 2020, 3:29 PM

#

You are not able to configure what?

weary stratus Apr 7, 2020, 3:43 PM

#

application

#

when I provide the same data in webbrowser at local home network I see that is loading, but after few seconds is result like timeout, I have duckdns and dnsmasq, I cannot change DNS on router, because this setting is blocked by provider, but from my point of view in dnsmask can be the same as in router instead of 8.8.8.8 like a lot of tutorials say

#

generally in browser I see that site is not trusted and I have to accept exception, maybe this is the reason why application cannot connect

#

application i mean mobile app, mobile app does not works, webrowser works correctly, all on android phone

jade wing Apr 7, 2020, 4:02 PM

#

If you're having issues with the official #android-archived app I'd ask in the #android-archived channel

weary stratus Apr 7, 2020, 4:56 PM

#

many thanks!

uneven delta Apr 7, 2020, 8:01 PM

#

No problem @night portal

night portal Apr 7, 2020, 8:01 PM

#

Hello!
can someone tell me which ports i have to open in deconz to be able to find in with hue app as bridge?

uneven delta Apr 7, 2020, 8:01 PM

#

I dont know but maybe can google it for u

#

Find it

#

Are you running deCONZ on port 80? The Hue app won't accept another port. For the Hue app to find the gateway, make sure UPnP is not disabled when starting deCONZ.

night portal Apr 7, 2020, 8:02 PM

#

yeah i read about 80

uneven delta Apr 7, 2020, 8:02 PM

#

then set deconz port to 80

night portal Apr 7, 2020, 8:03 PM

#

i just need to check which container... there are 3.. i will try

uneven delta Apr 7, 2020, 8:03 PM

#

Send a pic of them

night portal Apr 7, 2020, 8:04 PM

#

deCONZ API backend (Not required for Ingress)
deCONZ graphical desktop via VNC
deCONZ WebSocket (Not required for Ingress)

will not be 2. 😉

uneven delta Apr 7, 2020, 8:04 PM

#

send a pic of the docker ps output

#

Want too see all of the text there

#

Also send a picture of hassio deconz ui from hass want to see that too bc i dont use hassio but i had used it and dont remember so much there about the ui xd

night portal Apr 7, 2020, 8:08 PM

#

is here an integrated pic uploaded or do i have to upload it somewhere?

#

*upload

uneven delta Apr 7, 2020, 8:08 PM

#

external ig

#

send private to me

#

@night portal Use docker-compose for deconz to do that otherwise i cant help you forward bc i dont use hassio longer and dont wanna #### your system up

fading forge Apr 7, 2020, 8:53 PM

#

Hi guys,

I'm using the Mosquitto mqtt broker add-on. My goal is to have at least 1 Nodemcu that can be triggered in Home Assistant to water a plant. The trigger could be manually or on set intervals (3 days or smth like that).

I'm wondering what the best approach would be to do this.

#

I would also want to see clearly when the last time was that my plants got watered

#

i want to send the command + the amount of seconds that my pump has to run, so it would be nice to show a graph as well with the amount of water my plants received

#

but I'm running before I'm able to crawl...

#

it's not really a sensor, because I want to send commands, it's not really a switch because it doens't have an on or off... it's more of an button/action

#

which apparantly isn't possible by using the configurations.yaml, but which must be done by using a "Device trigger" which only works with auto discovery

#

But i'm not sure if i'm looking at it the right way and I might be in over my head atm

dense spadeBOT Apr 7, 2020, 9:00 PM

#

@worn salmon posted a code wall, it is moved here --> https://paste.ubuntu.com/p/RckbhndKPm/

worn salmon Apr 7, 2020, 9:01 PM

#

I have a clean install of HA on an Ubuntu server. Did my typical install, but this time running it on a ProxMox environment. Having an issue with add-on's VS Code and Node Red not being able to start. Getting the following error: https://kopy.io/Shdlc

This is basically the same error for both, but this is the copy for Node Red. Any suggestions on what I may be missing in my server setup?
(sorry for the code wall)

fading forge Apr 7, 2020, 9:02 PM

#

did you restore from a snapshot?

worn salmon Apr 7, 2020, 9:02 PM

#

No... new install

fading forge Apr 7, 2020, 9:03 PM

#

(I don't know a lot about this stuff, but I'm tired of googeling my own error, so I'll help you google yours :D)

#

i found this: https://community.home-assistant.io/t/node-red-wont-start-after-moving-to-new-hardware/183358

#

but no solution here

worn salmon Apr 7, 2020, 9:03 PM

#

Trust me, I've googled for the last 24 hours on this... can't find a solution

#

My issue is this is a new install... no snapshot, clean install. first plugins installed

#

nothing else on the server

fading forge Apr 7, 2020, 9:05 PM

#

are those the only 2 add-ons that you installed?

worn salmon Apr 7, 2020, 9:11 PM

#

Mosquitto broker and Google Assistant SDK are the only other 2 on top of that that are installed

#

I just feel like I am missing some part of Python

sly kindle Apr 7, 2020, 11:07 PM

#

@worn salmon Why not run the HA OS image in proxmox?

#

And when an addon doesn't start, check the system log page in the ui, or supervisor logs

nimble kraken Apr 7, 2020, 11:34 PM

#

yay

sly kindle Apr 8, 2020, 12:40 AM

#

booo

worn salmon Apr 8, 2020, 3:25 AM

#

@sly kindle I dont see a HA OS in proxmox

#

And the log provided is from the supervisor logs

sly kindle Apr 8, 2020, 4:02 AM

#

@worn salmon oh, I meant you could have used an HA OS image as your base instead of Ubuntu

raven flint Apr 8, 2020, 7:14 AM

#

HIVEMQTT is going to be deprecated -- why?

#

and does the official mosquito addon have an MQTT web interface or not?

dark yoke Apr 8, 2020, 7:15 AM

#

Home Assistant have one (under developer-tools), there are also a good amount of better clients

raven flint Apr 8, 2020, 7:19 AM

#

I just tried the in built one out, almost all my messages hang over the container: some go out of bounds of the browser: https://imgur.com/a/24xVm3X

#

Ok well I guess I will migrate over, I wonder if I can export my retained messages between addons

raven flint Apr 8, 2020, 8:26 AM

#

Ok so I want to extract /data/mosquitto/mosquitto.db and import into the new addon, is that feasible

#

I don't want to lose my retained messages

worn salmon Apr 8, 2020, 12:52 PM

#

@sly kindle thanks for the info! I didn't even think about that. I'll be trying it today.

gloomy star Apr 8, 2020, 2:21 PM

#

is it possible to reverse color_tresholds of Mini Graph Card based on the dark/light theme?

#

or the way to do it would be to conditionally draw the whole card?

weary stratus Apr 8, 2020, 5:02 PM

#

I just discovered HACS... is this commonly used in HA now? My last build was 0.76.2

sly kindle Apr 8, 2020, 5:03 PM

#

HACS isn't an addon. But yes, commonly used. Like the "unsupported app store" in plex

#

It's a UI ludeeus maintains for all the custom integrations and other things out there. Makes it easier to find/manage/install these things, but isn't required

weary stratus Apr 8, 2020, 5:04 PM

#

Recommended though?

#

easier than manual installs, correct?

#

so "add-ons" are official?

sly kindle Apr 8, 2020, 5:05 PM

#

If you first understand that it is all unsupported by HA, then yes

#

addons are docker containers

#

not related

weary stratus Apr 8, 2020, 5:07 PM

#

Interesting... can you tell me more? What kind of docker containers? I am running other containers, but... I am not connecting the dots

sly kindle Apr 8, 2020, 5:09 PM

#

📎 unknown.png

weary stratus Apr 8, 2020, 5:09 PM

#

so... "companion services"??

sly kindle Apr 8, 2020, 5:10 PM

#

you did not find it interesting in the past

#

https://ptb.discordapp.com/channels/330944238910963714/330944238910963714/419709060577886208

weary stratus Apr 8, 2020, 5:11 PM

#

No, I meant that that is the place to discuss that stuff, and it's called addo-ons

sly kindle Apr 8, 2020, 5:12 PM

#

https://ptb.discordapp.com/channels/330944238910963714/330944238910963714/418438798414839821

weary stratus Apr 8, 2020, 5:12 PM

#

What in the world???

sly kindle Apr 8, 2020, 5:13 PM

#

it'll click soon

weary stratus Apr 8, 2020, 5:13 PM

#

That was a while ago.

#

HEY HEY HEY...

sly kindle Apr 8, 2020, 5:13 PM

#

add-ons have always been part of "assio"

weary stratus Apr 8, 2020, 5:13 PM

#

they took away all my power to control HA.. I am just trying to find the new way to do things now

sly kindle Apr 8, 2020, 5:13 PM

#

the thing you took dumps on, here and at reddit I believe

#

lol

weary stratus Apr 8, 2020, 5:14 PM

#

I don't want automatic...'

#

but it seems to be the direction, and I am trying to stop fighting that and enjoy using HA

#

But.... WOW dude.. how long have you been waiting to bring that up??? And reddit too? I don't even remember posting in reddit. LOL Did I hurt your feelings or something? You seem to have taken that personal.

sly kindle Apr 8, 2020, 5:16 PM

#

not waiting. I just remember negativity well

weary stratus Apr 8, 2020, 5:16 PM

#

Well, this is why I mostly try not to get invovled

sly kindle Apr 8, 2020, 5:19 PM

#

anyway, I recommend HACS yes 😄

#

but...it's automatic...when it comes to the custom stuff

weary stratus Apr 8, 2020, 5:20 PM

#

Well, speaking of add-ons, do you recommend spinning up a container for just mqqt, or letting HA handle it?

sly kindle Apr 8, 2020, 5:21 PM

#

You're not running the supervised version of HA though, are you?

weary stratus Apr 8, 2020, 5:21 PM

#

ummmm... docker???

sly kindle Apr 8, 2020, 5:21 PM

#

But a self-managed docker install

weary stratus Apr 8, 2020, 5:21 PM

#

homeassistant/home-assistant:0.107.7

#

official I guess?

sly kindle Apr 8, 2020, 5:22 PM

#

no "supervisor" in the side panel that links to the addon store?

weary stratus Apr 8, 2020, 5:22 PM

#

Oh, no

#

So ther's an entire different version of HA now also.. I thought they were all combined

sly kindle Apr 8, 2020, 5:22 PM

#

So you would spin up your own container solution. I don't recommend using the embedded HA broker

weary stratus Apr 8, 2020, 5:23 PM

#

ok

sly kindle Apr 8, 2020, 5:23 PM

#

The mosquitto broker in the addon store is fine

#

but you're not running that installation

weary stratus Apr 8, 2020, 5:24 PM

#

um... should I be? I don't know the difference.. like I said, been away from HA awhile

sly kindle Apr 8, 2020, 5:26 PM

#

What used to be called Hassio was always an installation that made use of docker, but it has its own orchestrator called the "supervisor", which is a container that manages updates to other containers (addons) and HA itself, which also runs in a container

#

Like in the diagram above

weary stratus Apr 8, 2020, 5:26 PM

#

so hassio be came supervisor... man I really thought they were combined now

sly kindle Apr 8, 2020, 5:26 PM

#

So HA version 107.7 is still HA 107.7 whether you only run "core" or "~~hassio~~"

#

No what was Hassio is now just Home Assistant

#

But you can run Home Assistant "core" without a supervisor. In docker or a venv install, as you are doing

weary stratus Apr 8, 2020, 7:29 PM

#

I want to install ada on my hass.io installation. What i got to do after i setup almond und ada? I think i must get an TTS and STT but where i can conifgurate it? Thank you

turbid pagoda Apr 8, 2020, 9:44 PM

#

After the update to HA 108.0 I have got problems with the nginx proxy manager. The redirect are not available anymore and returning HTTP error 503. Does somebody else has this kind of problem ?

obtuse ginkgo Apr 8, 2020, 10:31 PM

#

Anyone know where the mariaDB DB file is actually stored on a hassIO install?

left ledge Apr 8, 2020, 11:25 PM

#

Hi guys. Hass.io on Docker running over Raspbian. Add-on CEC Scanner does nothing, but it never starts, no log shown... Any ideas? I have an RPi4 connected via HDMI cable to a TV when booting.

#

Can't create container from addon_core_cec_scan: 500 Server Error: Internal Server Error ("error creating overlay mount to /var/lib/docker/overlay2/0f18cd24c913f346f87c0b36af56d0328dc40b75b579b09f70e8d15c81380e85-init/merged: too many levels of symbolic links")...

sly kindle Apr 8, 2020, 11:27 PM

#

@obtuse ginkgo in /data of the container?

obtuse ginkgo Apr 8, 2020, 11:39 PM

#

I didn't see it, that's what I thought

autumn flume Apr 9, 2020, 1:00 AM

#

Hi guys this question is probably beaten but how does adguard home compare to pihole?

#

For Hassio

sly kindle Apr 9, 2020, 1:12 AM

#

@autumn flume it blocks ads using dns

#

like pihole

#

but has better integration with HA

#

📎 unknown.png

autumn flume Apr 9, 2020, 1:13 AM

#

Not to sound like a consperacy theorist but how is the privacy?

#

Since adguard is also paid

#

in some products

sly kindle Apr 9, 2020, 1:13 AM

#

You can automate the filtering, or tell google to "turn off adguard filtering" etc

#

You still choose the dns servers you want to use

#

Just like pihole

#

It's as private as you make it

#

You still add filtering lists from wherever around the internet

#

I think people really don't understand what pihole is

autumn flume Apr 9, 2020, 1:15 AM

#

Its just a dns sinkhole

#

pihole

sly kindle Apr 9, 2020, 1:15 AM

#

It's not some app that "goes through the pihole company"

#

neither is adguard

autumn flume Apr 9, 2020, 1:15 AM

#

I didn't mean it that way

#

Adguard also has paid offerings

sly kindle Apr 9, 2020, 1:15 AM

#

This is not one of those

#

This is the free, open source "home" offering

autumn flume Apr 9, 2020, 1:16 AM

#

kk

#

@sly kindle does adguard support conditional forwarding

#

https://imgur.com/a/zbAOunh

sly kindle Apr 9, 2020, 1:19 AM

#

you can set adguard as a dhcp server as well

autumn flume Apr 9, 2020, 1:19 AM

#

problem is not my network

#

I only use pihole for my device in my family

#

So was wondering if its possible to conditional forward

sly kindle Apr 9, 2020, 1:20 AM

#

as in, a single device?

autumn flume Apr 9, 2020, 1:20 AM

#

No multiple phones tablets

#

I just prefer keeping seperate

sly kindle Apr 9, 2020, 1:20 AM

#

I would just install it and check if it has what you need. You don't need to actually have it active to explore it

autumn flume Apr 9, 2020, 1:20 AM

#

true

#

ty

autumn flume Apr 9, 2020, 1:37 AM

#

works like a charm

blazing valve Apr 9, 2020, 1:50 AM

#

So... I incidentally removed the default addon repo but it refuses to work if I try and re-add it. I noticed that it doesn't have a repository.json. Do I have to re-flash the instance?

sly kindle Apr 9, 2020, 1:51 AM

#

@blazing valve I don't know if a ha su repair would fix that, but worth a try

blazing valve Apr 9, 2020, 1:54 AM

#

It hasn't added the repository back on first glance. Would it require a homeassistant restart?

sly kindle Apr 9, 2020, 1:54 AM

#

that only restarts home assistant

#

they are separate containers

blazing valve Apr 9, 2020, 1:54 AM

#

ok

sly kindle Apr 9, 2020, 1:54 AM

#

try a reload of the supervisor?

#

on the system page?

blazing valve Apr 9, 2020, 1:54 AM

#

ok

#

no change

sly kindle Apr 9, 2020, 1:56 AM

#

is it the community repo you lost?

blazing valve Apr 9, 2020, 1:57 AM

#

no, the default one

sly kindle Apr 9, 2020, 1:57 AM

#

how did you remove that?

blazing valve Apr 9, 2020, 1:57 AM

#

there was a remove button...

#

accidentally

#

while trying to setup other repos

sly kindle Apr 9, 2020, 1:58 AM

#

hmm, but there isn't a remove button for the official one

blazing valve Apr 9, 2020, 1:58 AM

#

huh, I wonder how I did that then

#

I'll just re-flash real quick

gloomy star Apr 9, 2020, 7:37 AM

#

uhm..strange but there is for me as well? @sly kindle
https://imgur.com/a/DjAdmBf

chrome vault Apr 9, 2020, 8:35 AM

#

anyone have any wise tips for InfluxDB installation? I think I really need to go through what I want logged thoroughly

#

Full snapshot (2188 MB)

wanton ravine Apr 9, 2020, 9:09 AM

#

just ran the config check addon and got an error

INFO:homeassistant.util.package:Attempting install of roku==4.1.0
INFO:homeassistant.util.package:Attempting install of mutagen==1.43.0
INFO:homeassistant.util.package:Attempting install of aiounifi==15
ERROR:homeassistant.scripts.check_config:BURB
Traceback (most recent call last):
  File "/usr/local/lib/python3.7/site-packages/homeassistant/scripts/check_config.py", line 204, in check
    async_check_ha_config_file(hass)
  File "/usr/local/lib/python3.7/asyncio/base_events.py", line 587, in run_until_complete
    return future.result()
  File "/usr/local/lib/python3.7/site-packages/homeassistant/helpers/check_config.py", line 105, in async_check_ha_config_file
    hass, config, core_config.get(CONF_PACKAGES, {}), _pack_error
  File "/usr/local/lib/python3.7/site-packages/homeassistant/config.py", line 647, in merge_packages_config
    merge_list = _identify_config_schema(component) == "list"
  File "/usr/local/lib/python3.7/site-packages/homeassistant/config.py", line 568, in _identify_config_schema
    key = next(k for k in module.CONFIG_SCHEMA.schema if k == module.DOMAIN)  # type: ignore
TypeError: 'function' object is not iterable
Fatal error while loading config: 'function' object is not iterable
Failed config
  General Errors: 
    - 'function' object is not iterable

Successful config (partial)

can anyone explain to me what it means please? @raven tinsel any ideas on this ?

chrome vault Apr 9, 2020, 9:12 AM

#

try running it again? maybe it was installing dependencies.. no idea what BURB is

wanton ravine Apr 9, 2020, 9:13 AM

#

this was the second time i checked same error both times

#

might just upgrade and see what breaks

chrome vault Apr 9, 2020, 9:16 AM

#

where would the place to ask ab hacs lovelace addons be?

wanton ravine Apr 9, 2020, 9:17 AM

#

i would say go to the repository and ask there

chrome vault Apr 9, 2020, 9:18 AM

#

confusingly it seems like it should be part of home assistant :/

#

2020-04-09 18:38:22 ERROR (MainThread) [hacs] Tried to serve up '/config/www/community/love
lace-thermostat-card/thermostat-card.js' but it does not exist

#

isn't that card part of the core?

#

the error would then make sense.. since it's not a hacs thing and wouldn't be in there

obsidian flare Apr 9, 2020, 9:19 AM

#

Hi

wanton ravine Apr 9, 2020, 9:20 AM

#

hacs adds custom cards etc not official ones i think

chrome vault Apr 9, 2020, 9:20 AM

#

I'm sure the thermostat is part of official though :/ you have a thermostat card right?

wanton ravine Apr 9, 2020, 9:21 AM

#

the fact its in config/www/community/....... makes me think its custom

dark yoke Apr 9, 2020, 9:21 AM

#

#frontend-archived @chrome vault (it is custom, and you have added it)

chrome vault Apr 9, 2020, 9:21 AM

#

I'm worried maybe the old manual yaml entry system got migrated through to the UI handled one and it's just stuck there

sly kindle Apr 9, 2020, 9:57 AM

#

@gloomy star that's the community repo

gloomy star Apr 9, 2020, 9:57 AM

#

ugh..I misunderstood..again ._. sorry

drowsy lynx Apr 9, 2020, 11:19 AM

#

is there anybody who use the light of OPPLE? I get the following errors when hass startup

#

2020-04-09 19:17:34 ERROR (MainThread) [homeassistant.components.light] Entity id already exists - ignoring: light.primary_bedroom_light. Platform opple does not generate unique IDs

dusk beacon Apr 9, 2020, 2:16 PM

#

hi guys, got an issue with the unify addon; there is a ssl connection issue if i want to connect to the frontend and all of my access points keep adopting (not sure whether they are related though...:-) ) Maybe something for @raven tinsel ??

sudden tartan Apr 9, 2020, 3:45 PM

#

how to go to my files and folders through samba add-on? It wont me let pass, I entered in my run window \\192.168.51.1 it shows me a login winow screen, and when I entered username and password which I setup in my HA, it tells me that this ip address is not accessible

#

https://i.imgur.com/AEkPUuq.png

sly kindle Apr 9, 2020, 4:31 PM

#

@sudden tartan are you using the user/pass you set up in the addon config?

#

You might check in the windows credential manager for an existing entry

sudden tartan Apr 9, 2020, 4:42 PM

#

@sly kindle now it works, when I edited workgroup

#

why when I tried to start Ubiquiti add-on, it crashes my HA? I have hassbian on raspberry pi

#

I cant see any logs, putty cant connect to my ip

stray prawn Apr 9, 2020, 9:13 PM

#

The Terminal and SSH addon stopped working randomly. When I restart I see a warning saying that no ingress session could be started.

stray prawn Apr 10, 2020, 2:30 AM

#

Strangely, it works on mobile, but not on windows

sly kindle Apr 10, 2020, 3:14 AM

#

@stray prawn clear cache?

stray prawn Apr 10, 2020, 4:54 AM

#

@sly kindle Nah, I tried in a private window, no dice.

weary stratus Apr 10, 2020, 6:36 AM

#

Hi guys, could you help me with DuckDNS Add-On ? The problem which I have is I cannot connect to HA from local network. I did all necessary steps whic are in this video from JuanMTECH https://www.youtube.com/watch?v=XdiGdC7K4sI, connection from outside works fine, but from internal network corrupted, I checked router configuraion with my Internet provider and all looks fine. Do you have any ideas ?

lusty lark Apr 10, 2020, 9:48 AM

#

hi guys, i have a problem with CEC Scanner add-ON, y have this error on development registry, Not initialized. Waiting for init. Source: /usr/local/lib/python3.7/site-packages/pycec/network.py:433
anyone can help me? im running hassio on docker.

weary stratus Apr 10, 2020, 10:45 AM

#

solved with nginx

timid urchin Apr 10, 2020, 1:27 PM

#

anyone know if its possible to reach the config for https://github.com/home-assistant/hassio-addons/blob/master/ssh/README.md via the samba share? My user's password doesnt work any more, and the SSH server key file is not working either. The only access I have is the /config/ dir 😐 edit: disregard, I deleted the auth and onboarding files.

long sinew Apr 10, 2020, 2:54 PM

#

does hass.io list the add-on names somewhere - it it not entirely clear to me how to calculate the name described here: https://developers.home-assistant.io/docs/hassio_addon_communication

dark yoke Apr 10, 2020, 2:56 PM

#

In the URL when you are on the addon page

long sinew Apr 10, 2020, 2:56 PM

#

knowking on my head - thank you @dark yoke

inner hare Apr 10, 2020, 2:56 PM

#

oh that's a bit easier to find than looking in the terminal 😄

#

@dark yoke since you're here 😄

dark yoke Apr 10, 2020, 2:57 PM

#

running

inner hare Apr 10, 2020, 2:57 PM

#

I think I found a buggy bug, can you advise?

dark yoke Apr 10, 2020, 2:57 PM

#

open an issue

#

or get bug spray

inner hare Apr 10, 2020, 2:57 PM

#

I made a clone of the NUT addon - trying to use the most recent dev branch as my UPS is somewhere after the latest stable build

#

and in my testing I've encountered this now
20-04-10 14:48:08 INFO (SyncWorker_4) [supervisor.docker.addon] Start build local/armv7-addon-nut:dev 20-04-10 14:51:17 ERROR (SyncWorker_4) [supervisor.docker.addon] Can't build local/armv7-addon-nut:dev: The command '/bin/ash -o pipefail -c cd nutclone && ./autogen.sh' returned a non-zero code: 1 20-04-10 14:51:17 ERROR (MainThread) [asyncio] Task exception was never retrieved future: <Task finished coro=<AddonManager.install() done, defined at /usr/src/supervisor/supervisor/addons/__init__.py:106> exception=AddonsError()> Traceback (most recent call last): File "/usr/src/supervisor/supervisor/addons/__init__.py", line 135, in install raise AddonsError() from None supervisor.exceptions.AddonsError

#

and my disk space isn't going back to what it was before

dark yoke Apr 10, 2020, 2:59 PM

#

Build it with docker instead of addon to get more output

inner hare Apr 10, 2020, 3:00 PM

#

I can't build it with docker as the container references supervisor, which can't be accessed - thoughts?

dark yoke Apr 10, 2020, 3:00 PM

#

Building should not be a problem

inner hare Apr 10, 2020, 3:01 PM

#

hmm, can I use this dockerfile in the build? I was trying to use the build image before

crimson bluff Apr 10, 2020, 3:04 PM

#

hey guys! I'm having trouble setting up adguard. I've managed to setup a static ipv4 address for my hassio Nuc but I'm unsure as to where to set a static DNS server/s any help would be much appreciated!

#

Static IP on Hassio nuc I did with nmcli

inner hare Apr 10, 2020, 3:06 PM

#

@crimson bluff ssh into ha and do 'ha dns help'

#

or, https://github.com/home-assistant/operating-system/blob/dev/Documentation/network.md#static-ip

crimson bluff Apr 10, 2020, 3:08 PM

#

I used that doc to setup the static ipv4 address. I think my problem is I don't know exactly what my dns address should be?

#

I can see ipv4.dns on nmcli

#

and I changed that to my router IP

#

without success

inner hare Apr 10, 2020, 3:09 PM

#

hmmm

#

what is your dns server set to on your machine?

crimson bluff Apr 10, 2020, 3:10 PM

#

192.168.11.1 which is my router IP

#

should I set it to the routers WAN IP?

inner hare Apr 10, 2020, 3:11 PM

#

no

#

how do you know it's not working? what error are you getting?

crimson bluff Apr 10, 2020, 3:12 PM

#

Entering the tcp listener loop on [::]:53 is what I just pulled from the Adguard log

#

it is not blocking adds poping up on speedtest.net website

inner hare Apr 10, 2020, 3:14 PM

#

lol

#

that's because now you have to change YOUR machine's DNS server to point to your AdGuard instance 🙂

sly kindle Apr 10, 2020, 3:14 PM

#

@crimson bluff you generally want external DNS servers set on your ha instance

crimson bluff Apr 10, 2020, 3:16 PM

#

so the laptop I'm working on right?

inner hare Apr 10, 2020, 3:16 PM

#

@sly kindle I'm still using PiHole - can Adguard do internal dns resolution like pihole?

#

@crimson bluff yup

crimson bluff Apr 10, 2020, 3:17 PM

#

@sly kindle can you please explain.. I feel like an 80 year old😩

inner hare Apr 10, 2020, 3:18 PM

#

@crimson bluff an external DNS is one like Google's (8.8.8.8) or Cloudflare (1.1.1.1) or your ISP one

#

99% of the time it's probably best to use that, as it's gonna be more reliable than yours, and if you can't reach the Internet then adguard is useless for you anyway lol

crimson bluff Apr 10, 2020, 3:19 PM

#

@inner hare I went to my network card and changed my dns to my adguard server (192.168.11.250) reloaded, still have adds

inner hare Apr 10, 2020, 3:20 PM

#

you running Windows on your laptop?

crimson bluff Apr 10, 2020, 3:20 PM

#

lol true

#

yes

inner hare Apr 10, 2020, 3:20 PM

#

open command prompt ->>> ipconfig /flushdns

#

then browse sites

crimson bluff Apr 10, 2020, 3:22 PM

#

flushed successfully, still have adds.

inner hare Apr 10, 2020, 3:22 PM

#

are you getting hits in adguard?

crimson bluff Apr 10, 2020, 3:22 PM

#

I can see dns queries coming in on adgaurd

#

blocked adds:0

inner hare Apr 10, 2020, 3:22 PM

#

ok so now maybe an issue with adguard, or you didn't set it up completely yet

crimson bluff Apr 10, 2020, 3:23 PM

#

let me triple check

sly kindle Apr 10, 2020, 3:24 PM

#

so, the instance running HA, you probably do not want running through adguard as this may interfere with integrations or may be a hassle to deal with in general. So you have that instance using external dns servers like @inner hare says or 1.1.1.1 or 9.9.9.9 etc

#

And your router should be handing out your HA's ip address as the dns server to all clients on your network.

inner hare Apr 10, 2020, 3:25 PM

#

ahh so that's why you'd do that

#

clever

crimson bluff Apr 10, 2020, 3:25 PM

#

@inner hare It looks like everything is setup correctly except for the external DNS which I'm unsure of

inner hare Apr 10, 2020, 3:26 PM

#

and pretty obvious too come to think of it now lol

sly kindle Apr 10, 2020, 3:26 PM

#

Your clients may need to disconnect and reconnect to the network in order to get the new dns server handed to them

#

Like on my windows machine, I usually just disable/enable the network adapter

crimson bluff Apr 10, 2020, 3:26 PM

#

And your router should be handing out your HA's ip address as the dns server to all clients on your network.
@sly kindle Yes this is what I'm trying to achieve

#

so just to confirm

inner hare Apr 10, 2020, 3:27 PM

#

Is there an option within AdGuard to actually enable the blocking?

crimson bluff Apr 10, 2020, 3:27 PM

#

DNS of my Hassio through NMCLI set to 8.8.8.8

inner hare Apr 10, 2020, 3:28 PM

#

good

sly kindle Apr 10, 2020, 3:28 PM

#

yes, the one in particular is just called "adguard filtering"

#

but it should be on by default

crimson bluff Apr 10, 2020, 3:28 PM

#

and the dns in my router set to ip of adguard server

inner hare Apr 10, 2020, 3:28 PM

#

correct, but after it starts working

#

and be aware that if AdGuard ever goes down, your machines won't be able to resolve dns names 😄

crimson bluff Apr 10, 2020, 3:30 PM

#

yes! got it also that way thanks

inner hare Apr 10, 2020, 3:30 PM

#

you're tempting me to install it just to help you out lol

crimson bluff Apr 10, 2020, 3:30 PM

#

LOL Im desperate🤣

inner hare Apr 10, 2020, 3:32 PM

#

lol hold up

#

hmm mine worked straight away