raven tinsel Feb 7, 2020, 10:44 AM

#

The logging you see in the add-on interfaces, in logs section

#

is in memory

#

hence it is limited to X lines

granite stump Feb 7, 2020, 10:45 AM

#

Yes but for instance mosquitto logs read as such
"1581071458: Saving in-memory database to /data/mosquitto.db."

raven tinsel Feb 7, 2020, 10:45 AM

#

that is not logging

#

as in, that is actual storage of your DB

#

And for the logs: Where do you read that log line?

granite stump Feb 7, 2020, 10:46 AM

#

What do you mean?

raven tinsel Feb 7, 2020, 10:46 AM

#

You dig up the line from somewhere

#

where do you go, to read the log line

granite stump Feb 7, 2020, 10:46 AM

#

Oh yeah right where you said it'd be

#

In the logs section of the add on page

raven tinsel Feb 7, 2020, 10:46 AM

#

so yeah, that is in memory

granite stump Feb 7, 2020, 10:47 AM

#

Even then

raven tinsel Feb 7, 2020, 10:47 AM

#

and does not impact your SD

granite stump Feb 7, 2020, 10:47 AM

#

I'd like to rationalize a little bit on the logging of dnsmasq at least

#

It's really no use to me in this state (as in: it logs every single call of the dns)

#

I'd like to set logs to be warning of higher

raven tinsel Feb 7, 2020, 10:48 AM

#

sorry to hear that

#

not possible right now

granite stump Feb 7, 2020, 10:48 AM

#

Right, no problem

#

You reassured me it isn't saving it anywhere and that's enough

#

Wish me luck, upgrading to 105.2 from 104.3 😄

#

Thank you! 🙂

raven tinsel Feb 7, 2020, 10:49 AM

#

No problem m8 👍

wind quiver Feb 7, 2020, 3:18 PM

#

Hey all. I just started using Home Assistant within that last few months. Everything I've integrated seems to have been pretty simple. But now I'm having issues trying to get the MagicMirror2 integration to work. Is there anyone here that is using this addon?

Thanks,

trail gazelle Feb 7, 2020, 3:41 PM

#

Hi ! I have a question reagrding th deCONZ add-on and Ikea Tradfri switch. Does someone has this kind of stuff?

covert arch Feb 7, 2020, 4:43 PM

#

I only have the tradfri switch with gateway

trail gazelle Feb 7, 2020, 5:00 PM

#

I also have a tradfri switch. I have been able to connect it to deCONZ but I only have the battery sensor as entity in home assitant not the switch...

#

so not reallly useful for now😅

trail gazelle Feb 7, 2020, 6:09 PM

#

Ok, they are not "entites" but "devices"🤦

#

Only problem remaining is the pairing of my SYMFONISK sound controller with deCONZ/ConbeeII. I cannot get it to pair together...

#

( I plan to use it as a remote for my piCore Players)

valid cobalt Feb 7, 2020, 8:59 PM

#

Hello everyone! Can I ask something about Let's Encrypt here?

merry sage Feb 7, 2020, 9:10 PM

#

idly wonders how much trouble I'd get into, if I said 'no' just for funsies.

valid cobalt Feb 7, 2020, 10:06 PM

#

Hi guys, I don't know if this is the right channel to ask, but I'm really struggling with Let's Encrypt. I tried to follow the guide on the home assistant web pages and some of the post found on the forum and so on. My ISP has an integrated DynDNS that I can turn on inside the router, so I do have a myowndomain.com that points to my IP address. I would like to use it without DuckDNS, as all the posts/guides combine DuckDNS and Let's Encrypt. Can someone give me a quick hand? I'm missing something

teal lotus Feb 7, 2020, 10:10 PM

#

i run HA core so i don't have addons but the setup for the lets encrypt addon seems pretty simple: https://github.com/home-assistant/hassio-addons/blob/master/letsencrypt/README.md

valid cobalt Feb 7, 2020, 10:22 PM

#

I'll give another try @teal lotus I guess I did set dns as challenge instead of http and someway messed up the hassio as I couldnt access to it anymore somehow.

teal lotus Feb 7, 2020, 10:26 PM

#

note when you set a base_url under http: in your configuration.yaml you'll need to access even locally over https://

#

that might have been it, but without specific information on the issue it's hard to tell

valid cobalt Feb 7, 2020, 10:27 PM

#

I'll try in a moment and see if it works.

#

I'm trying to understand a thing about where the "config" data of add-ons configured in the UI (like samba) is stored as I can't find it in any folder

teal lotus Feb 7, 2020, 10:30 PM

#

its in the add-on page

remote oriole Feb 7, 2020, 10:31 PM

#

you won't find the file, it's inaccessible for addons (aside from local custom ones)

teal lotus Feb 7, 2020, 10:32 PM

#

Oh nvm I see what you mean

valid cobalt Feb 7, 2020, 10:32 PM

#

I see, can I still use the secret file in the config of the add-on?

remote oriole Feb 7, 2020, 10:32 PM

#

you can try, apaprently many support it but some do not

valid cobalt Feb 7, 2020, 10:33 PM

#

ok

#

thank you guys

#

sorry for the dumb question just started a few days ago and got stuck on some initial stuff.

desert mist Feb 7, 2020, 10:46 PM

#

hey all, i pulled the latest docker image and HA isn't finding my HACS install and the custom components

sly kindle Feb 7, 2020, 10:48 PM

#

what do you mean latest?

#

like :latest ?

desert mist Feb 7, 2020, 10:48 PM

#

:latest

#

funny thing is that when i restarted with latest it didn't work on my desktop, lovelace complained

#

oh nvm, the other computer had the JS in memory

#

duh

#

darn

#

bc i'm stumped

sly kindle Feb 7, 2020, 10:52 PM

#

you should specify a version and not :latest

#

Which can be anything...

#

sometimes something you don't want

desert mist Feb 7, 2020, 10:53 PM

#

true i can go back

#

want to play with zones though in the UI 😭

#

for all my yaml'n

sly kindle Feb 7, 2020, 10:54 PM

#

is this with a supervisor or without?

desert mist Feb 7, 2020, 10:54 PM

#

idgi

sly kindle Feb 7, 2020, 10:54 PM

#

do you have a supervisor container

sly kindle Feb 7, 2020, 11:20 PM

#

bzgb

desert mist Feb 7, 2020, 11:27 PM

#

i tried stable, it's not the solution

weary stratus Feb 7, 2020, 11:27 PM

#

looking for an explanation of the samba add on . configuration shows examples for "allow_hosts:" And I do not now what the "/nn" is for?

10.0.0.0/8
172.16.0.0/12

desert mist Feb 7, 2020, 11:29 PM

#

worst is that node red integration is broken 😦

sly kindle Feb 8, 2020, 1:18 AM

#

@weary stratus leave those alone. those cover most home networks

#

@desert mist still no idea what you're running

#

do you have a supervisor container

#

are you able to explain why you are pulling images?

#

one answer means you're running #672217570283094017, another means you're running #330944238910963714

desert mist Feb 8, 2020, 1:32 AM

#

@sly kindle sorry running in docker, tried stable & latest

#

last restart, when i pulled the latest, latest, some integrations broke including NR & HACS, not sure what else you are looking for

sly kindle Feb 8, 2020, 1:38 AM

#

@desert mist 😛 you can still run in docker with a supervisor or without one

desert mist Feb 8, 2020, 1:39 AM

#

not sure what you mean

sly kindle Feb 8, 2020, 1:39 AM

#

can you docker ps

desert mist Feb 8, 2020, 1:39 AM

#

went back to the image, still no bueno

sly kindle Feb 8, 2020, 1:39 AM

#

image of what?

desert mist Feb 8, 2020, 1:39 AM

#

yess'm

sly kindle Feb 8, 2020, 1:39 AM

#

lol

#

aight

desert mist Feb 8, 2020, 1:39 AM

#

sorry the last working image i used, bea3c823576c

#

Home Assistant 0.104.3

#

i see the error now in the logs but i can't copy it

#

i'm failing at life

#

Error loading custom_components.hassio. Make sure all dependencies are installed

sly kindle Feb 8, 2020, 1:43 AM

#

yay....you're running with a supervisor. You are not a native docker user, you should not be "pulling" any images. You run Hassio. That's all I was looking for.

#

If you are using "docker pull" commands you are doing it wrong

desert mist Feb 8, 2020, 1:44 AM

#

oh sorry, it's how i got on 0.104.4

#

dot 3

#

no sorry, incorrect

#

no vm, no supervisor, running in debian

sly kindle Feb 8, 2020, 1:46 AM

#

if you run hassio, you have a supervisor

desert mist Feb 8, 2020, 1:46 AM

#

debian, docker, home assistant

sly kindle Feb 8, 2020, 1:47 AM

#

ok, your questions belong in #672217570283094017 then

#

#672217570283094017 doesn't have #add-ons-archived

#

it's just straight home assistant in docker

#

https://i.imgur.com/E2dVTCd.png

#

👆 That's what a "hassio" install looks like

compact cargo Feb 8, 2020, 9:53 AM

#

anyone having problem with HDMI CEC

#

after the 0.105/3.9 upgrade?

dense spadeBOT Feb 8, 2020, 9:54 AM

#

@compact cargo posted a code wall, it is moved here --> https://paste.ubuntu.com/p/H4y68fCTYc/

karmic rover Feb 8, 2020, 2:57 PM

#

Hi, anyone had issues with customize.servers after updating to nginx add-on 2.6?

#

mine doesn't seem to care about the config that is in servers: nginx_proxy/*.conf

#

(also updated HassOS from 1.12 to 3.9, but everything else is working normally)

outer willow Feb 8, 2020, 7:42 PM

#

Esphome question: it has been a number of releases since I used this and lots has changed. I wrote a yaml based on another file that was working. It validates. But when I save and open to edit I get 404. Something simple wrong?

remote oriole Feb 8, 2020, 7:50 PM

#

@outer willow the addon page 404's?

elfin stone Feb 8, 2020, 7:51 PM

#

While i am back to home and i am really confuse. my duckdns working fine and public ip correct. So I am still unable to access because my BitDefender found suspicious connection blocked. Next I tried Add to exceptions and trying to open browser then they says about ssl expired . Okay I tried to process to visit risk on my raspberry pi .

#

I double checked my SSL expired until April 2020 and my Adguard saying "Your SSL certificate is expired. Update Encryption settings."

#

I am really confuse and why

#

okay, i am going to update everything

#

wow, still working perfect and no problems.. so reason old version Home Assistan + OS was expired SSL early? That why i unable to HA on my phone

outer willow Feb 8, 2020, 11:19 PM

#

@remote oriole not sure what you mean. I am trying to attach a photo but it looks like it is blocked

remote oriole Feb 8, 2020, 11:21 PM

#

@outer willow not sure what you mean either cause you haven't given a whole lot of info on whats going on hehe

outer willow Feb 8, 2020, 11:22 PM

#

How to post photos?

#

My other discord’s allow it

remote oriole Feb 8, 2020, 11:23 PM

#

you can use something like imgur ect

#

and post the link

outer willow Feb 8, 2020, 11:24 PM

#

So I open a new esphome dashboard event. Copy previously working code and the modify for the new device and hit save. The window closes. If I click on edit it says “404: file not found”

remote oriole Feb 8, 2020, 11:28 PM

#

so assuming you tried doing it again and it fails, have you tried creating one of something else to see if it fails as well?

#

I'm not 100% sure how it saves those, you'll see a file name ect but I don't believe it actually creates a file with that name, instead I think it saves that data in something else and just refers to that as that file. so with that in mind, if it fails to save anything you may have something corrupted.

outer willow Feb 8, 2020, 11:41 PM

#

https://imgur.com/a/6JNxKUr

#

It will compile from the overflow menu fine. The. When I click download it fails

remote oriole Feb 8, 2020, 11:43 PM

#

do you have other devices already setup in esphome and working?

#

oh i see that sensor_node1. does that work?

outer willow Feb 9, 2020, 12:33 AM

#

Yes it does

#

I am using that as the base

#

I restarted the add-on and could dl the binary finally

#

But now bright esphome-flasher nor serial on the raspy are working for upload

noble oak Feb 9, 2020, 12:44 AM

#

can anyone here help me setting up this custom component?
https://github.com/postlund/hass-atv-beta

plush hawk Feb 9, 2020, 4:11 AM

#

Does anyone know why the add-on in hassio pi4 will not load a repo

20-02-09 04:06:15 ERROR (MainThread) [hassio.store.git] Can't clone https://github.com/DavidFW1960/bom-weather-card repository: Cmd('git') failed due to: exit code(128)
cmdline: git clone --depth=1 --recursive --shallow-submodules -v https://github.com/DavidFW1960/bom-weather-card /data/addons/git/8ee35b6c
stderr: 'Cloning into '/data/addons/git/8ee35b6c'...
fatal: unable to access 'https://github.com/DavidFW1960/bom-weather-card/': Could not resolve host: github.com
'.
20-02-09 04:06:15 ERROR (MainThread) [hassio.store] Can't load from repository https://github.com/DavidFW1960/bom-weather-card
20-02-09 04:06:15 INFO (MainThread) [hassio.store] Load add-ons from store: 68 all - 0 new - 0 remove

remote oriole Feb 9, 2020, 4:24 AM

#

@plush hawk because you're doing it wrong and not following the https://github.com/DavidFW1960/bom-weather-card#installation

plush hawk Feb 9, 2020, 4:38 AM

#

@remote oriole hi SonomaGTS thanks for replying theres two ways of installing the addon the easy way or the hard way im i not reading it correct does not say that you can add a repo to the HACS

sick mortar Feb 9, 2020, 6:00 AM

#

can some one help ?

remote oriole Feb 9, 2020, 6:18 AM

#

@plush hawk This plugin is now part of the default HACS store.
you shouldn't have to add the repo to HACS, it should be in the list. I found the weather card under Plugins. You simply install it from there rather than adding the repo.

#

@sick mortar go ahead post your question, any code you want checked and if someone can help they will. make sure if you are posting code to use something like pastebin.

dense spadeBOT Feb 9, 2020, 6:19 AM

#

Please use https://www.hastebin.com/ or https://paste.ubuntu.com/ to share code or logs.

plush hawk Feb 9, 2020, 6:22 AM

#

@remote oriole ok thanks ill look into it and ill be sure to use pastebin next time

sick mortar Feb 9, 2020, 6:23 AM

#

Installed HACS and wanted to install https://github.com/kalkih/mini-graph-card
it will not show up
steps i did.
1: installed the card
2: added the resources: module to Raw config editor
3: HA restart.

i would assume it would now work am i missing steps ?

remote oriole Feb 9, 2020, 6:26 AM

#

did you add a card to lovelace using like one of the examples provided? https://github.com/kalkih/mini-graph-card#example-usage normal for custom cards you would pick the Manual Card option then place the code.

sick mortar Feb 9, 2020, 6:28 AM

#

yes i did .. get this error: Cannot read property 'setConfig' of undefined

#

copied the name of my sensor form Entities "sensor.shelly_shsw_pm_f26ed3_total_consumption_attr" The full name

remote oriole Feb 9, 2020, 6:30 AM

#

@sick mortar this is a #frontend-archived question so lets take this over to the correct channel.

sick mortar Feb 9, 2020, 6:31 AM

#

Ohh Sry.

plush hawk Feb 9, 2020, 7:23 AM

#

@remote oriole just loaded the HACS and i found it thanks again!

trail gazelle Feb 9, 2020, 8:42 AM

#

Hi ! is there someone that has good understanding about deCONZ in here ?

dry tree Feb 9, 2020, 10:20 AM

#

Hi! Are there someone here who has experience with InfluxDB?

I´ve installed and followed the guidelines. Grafana is able to connect to the influxDB, but when I check influxDB. There are no data that is being generated to home_assistant.autogen. Any clues what might be wrong?

I also "influxdb:" in configuration.yaml

next zephyr Feb 9, 2020, 11:56 AM

#

@dry tree Did you restart hassocks ?

#

hass

weary stratus Feb 9, 2020, 5:17 PM

#

can someone help me with the setting up github in the configurator add-on? I'm looking on the HA documentations but nothing is really clear. I've also tried a few google and youtube search.

cosmic crater Feb 9, 2020, 5:18 PM

#

what is the "Almond" plugin?

sly kindle Feb 9, 2020, 5:19 PM

#

almond is like an assistant

#

Google assistant or Alexa

cosmic crater Feb 9, 2020, 5:20 PM

#

aha, ok. wierd that it has no information what it is

sly kindle Feb 9, 2020, 5:20 PM

#

Like right now I have almond sending cat gifs when motion is detected in the kitchen

cosmic crater Feb 9, 2020, 5:20 PM

#

guess its like "usenet"

weary stratus Feb 9, 2020, 5:21 PM

#

can anyone help me with samba...i can not acess my config files from a linux laptop...i can see the share, but not able to login / open it?

#

everytime I try to do a "git push" from the configurator add-on I get the following error
Cmd('git') failed due to: exit code(128)
cmdline: git push --porcelain origin
stderr: 'fatal: could not read Username for 'https://github.com': No such device or address'

#

but if I ssh to my pi and do it manually then I get prompted for usernam/pwd and it works.

#

so not sure what I'm missing from my confiuration in the configurator add-on. I can't find any documents or solutions online.

sly kindle Feb 9, 2020, 5:39 PM

#

@weary stratus what file manager?

weary stratus Feb 9, 2020, 5:40 PM

#

@sly kindle im using debian 10

#

whatever stock file manager comes with that, its just called 'Files'

#

if i connect to the server 'manually' via smb://<my.hassio.ip it works

sly kindle Feb 9, 2020, 5:41 PM

#

I enter smb://ip_address down at the bottom of mine where it says Connect to server, then I see the shares, then trying to access one I am prompted for user/pass

weary stratus Feb 9, 2020, 5:41 PM

#

Nautilus

#

sorry, see my previous message @sly kindle, i did this and can access

#

how would i go about using visual studio code? i can seem to open the samba share?

sly kindle Feb 9, 2020, 5:44 PM

#

@weary stratus when you used nautilus did you have it remember the credentials?

weary stratus Feb 9, 2020, 5:46 PM

#

i never got to enter any credentials when i clicked on the deteced 'hassio' folder within 'other locations

#

is there a way to 'reset' this, incase i did something dumb?

sly kindle Feb 9, 2020, 5:49 PM

#

@weary stratus I didn't have VSC installed on this laptop. Now that I do, I see what you mean

#

If I "open folder" from VSC the only way to /config is by choosing "recent" at the top

weary stratus Feb 9, 2020, 5:51 PM

#

yeah, same here @sly kindle

#

@sly kindle i cant even figure out how to save an edited file in VSC 🤦‍♂️

mortal moth Feb 9, 2020, 6:18 PM

#

Anyone familiar with zigbee2mqtt addon?

fading void Feb 9, 2020, 7:16 PM

#

Hey guys! Does anyone have an idiots starter guide for Eclipse-Mosquitto? I am having issues with auto discovery and have a feeling is because announcements have happend and now stored in the MQTT broker.
But how on earth do you clear the broker if you are using the home-assistant (previously HASSIO) addon?

Reason for me not manually adding them via yaml is due to wanting to utilise the GUI as much as possible for ease of life.

#

@mortal moth depends what you are after fella, have it running on my end

dawn moss Feb 9, 2020, 7:35 PM

#

@fading void what are your devices? are they tasmota? if so you have to set and option (option19?) for discovery

fading void Feb 9, 2020, 7:36 PM

#

Im just using the standard Shelly MQTT (not flashed yet to see if i like to keep it on default fw)

dawn moss Feb 9, 2020, 7:38 PM

#

in developer tools/mqtt listent to topic # see if you get what you expect.. or anything at all from them

fading void Feb 9, 2020, 7:38 PM

#

ye thats the issue, i can see all the shelly chatter

#

but it wont come up haha

#

ive added the https://github.com/bieniu/ha-shellies-discovery as my understanding is tha tShellies dont come up in integrations?

#

for example
Message 31 received on shellies/shellyswitch25-B9338E/input/0 at 7:41 PM:

dawn moss Feb 9, 2020, 7:42 PM

#

yeah just googled that myself.. looks liek you may need the discovery script or something.. i'd say go waith tasmota. its great

fading void Feb 9, 2020, 7:43 PM

#

ye begining to think that also haha, i just really didnt want to flash a load of them 😩

#

never mind, nothing easy is worth doing 😉

dawn moss Feb 9, 2020, 7:43 PM

#

the latest tools are pretty slick and painless

fading void Feb 9, 2020, 7:44 PM

#

by any chance do you know if you can flash Shelly via an app or something? or do you still have to go via the header

dawn moss Feb 9, 2020, 7:47 PM

#

never messed with shelly but there is a lot of info on google. It may deoends on which onw and the vintage

fading void Feb 9, 2020, 7:47 PM

#

ok cool, ill get my googling on 😄

#

thanks for the replies anyway mate

bright vector Feb 9, 2020, 8:35 PM

#

Hello to all,
I am creating a home assistant add-on: a wireguard client. For the moment it has been very simple, but I ran into a problem that is blocking me. At the beginning when I launched wg-quick up it said "ip6tables command not found". So I tried to install ip6tables in the docker image with apk add ip6tables, but now it gives me another error: https://i.imgur.com/UXXJ0d8.png
Any ideas on how to solve ?

rain wind Feb 9, 2020, 9:04 PM

#

hey there is there anyone using the portainer "port mapping for Edge Agent"?

remote oriole Feb 9, 2020, 9:43 PM

#

why you guys want to flash a shelly with tasmotoa when something like this works flawlessly https://github.com/StyraHem/ShellyForHASS is beyond me lol

muted fjord Feb 9, 2020, 10:48 PM

#

Is this the right place to seek help for the ESPhome add-on? I'm having a bit of trouble getting started

remote oriole Feb 9, 2020, 10:49 PM

#

@muted fjord yup, post your question along with any relevant information that may be needed to possibly answer it.

muted fjord Feb 9, 2020, 10:49 PM

#

@remote oriole will do - thanks

#

I have been unable to get ESPhome to connect to an ESP8266 board. When I try to "compile and upload" I get "ERROR Connecting to 192.168.1.227:8266 failed: [Errno 111] Connection refused" but when I look at the logs (within ESPhome) it says it's trying to connect to a different port

#

INFO Connecting to 192.168.1.227:6053 (192.168.1.227)
WARNING Initial connection failed. The ESP might not be connected to WiFi yet (Error connecting to 192.168.1.227: [Errno 111] Connection refused). Re-Trying in 1 seconds

#

In the add-on conffig, I left the port section as the default (empty) bc it said it wasn't necessary for hass.io ingress

#

the board is connected to wifi, and I have assigned it a static IP from within my router

#

I can already control the board via the E=WeLink app - but need to get this into HA

remote oriole Feb 9, 2020, 11:05 PM

#

@muted fjord confused by the ewelink app thing. did you load esphome onto the esp8266 board?

muted fjord Feb 9, 2020, 11:08 PM

#

@remote oriole annnnnd....my daughter just threw up...will be back later to clarify

remote oriole Feb 9, 2020, 11:08 PM

#

lol

west flint Feb 9, 2020, 11:26 PM

#

is motioneye supposed to show up in the store its not showing on my end?

nvm removed and added the repo got it working

muted fjord Feb 9, 2020, 11:31 PM

#

@remote oriole Ok - all cleaned up - that was messier than my configuration.yaml file...but anyways...

#

So here is the board I have, and what I have done so far: https://www.amazon.com/gp/product/B07FJ77MZ9/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1. It came with instructions on setting it up through an app - so I did that first to get it onto my wifi so I could set a static IP. This worked fine. Once static IP was set, I installed and configured the ESPhome add-on; I'm on an VM install if that matters. Only change to the add-on config was false to true for ssl, since I am running through duckDNS to get external. From there, I added a new node via the add-on within HA (gave it a name, selected generic ESP, entered my wifi SSID/pwd, and it created the node. THen I jacked a bit of YAML from Dr Zzz'z vid on garage door controllers, saved it and compiled and uploaded - and see the "ERROR Connecting to 192.168.1.227:8266 failed: [Errno 111] Connection refused"

remote oriole Feb 9, 2020, 11:43 PM

#

@muted fjord ok so in order to use esphome you need to flash the device with esphome. Your gonna wanna look around at a few different sources such as one like this (plus more) to get a better understanding https://youtu.be/soKuma8DJWQ I'm not sure what the device you bought came with but it won't work if it's not esphome and that's why you get errors.

#

@muted fjord alternatively since your device marked as a sonoff you can try something like this. https://github.com/AlexxIT/SonoffLAN I have not tried this so I can't really commit about it.

muted fjord Feb 10, 2020, 12:08 AM

#

@remote oriole thanks for the direction, I'll check both of them out. I think I assumed the add on carried out the flashing, either by USB or over the air, but that's not the case, correct?

remote oriole Feb 10, 2020, 12:13 AM

#

no unfortunately it isn't that simple lol

#

I would try the second thing I posted first. that you don't have to flash anything

#

and if it works it would be by far the easiest solution

muted fjord Feb 10, 2020, 12:21 AM

#

option #2 does look promising - will give it a try, thanks again!

muted fjord Feb 10, 2020, 1:52 AM

#

@remote oriole #2 worked...sweet!

weary stratus Feb 10, 2020, 9:18 AM

#

I'm trying to install a mysensors node in the node red add-on.

#

I'm trying to install a mysensors node in the node red add-on. But that fails because sqlite3 can't be installed. I found that it should be compiled from source, but there are no build tools available in the docker image. How can I build this thing?

chrome vault Feb 10, 2020, 9:59 AM

#

does anybody here use adguard? it seems to break local name resolution even if you supply your router as the upstream dns

balmy pelican Feb 10, 2020, 10:21 AM

#

I've been playing with some Spotify add-ons and cards, but I can't really get a result that I'm content with.
Does anyone know a way to create a Spotify card with a lot of functions, like change the current output speaker/group to a different one?
I'd love to change the current playing output to, for example, the whole house.

weary stratus Feb 10, 2020, 11:27 AM

#

hi, I need to use rpi's wifi for hassos network (as client) and it also as server (access point), I found this (https://github.com/oblique/create_ap/blob/master/create_ap) for do it simply and fast but with hassos "restrictions" I suppose I must do it with addon instead, or I'm wrong? is there any hassos or docker restrinction that prevent use of wifi adapter from hassos (as client) and from addon (as server/AP)? thanks for any reply and sorry my bad english

surreal kraken Feb 10, 2020, 5:46 PM

#

I'm using @pure pivot's addon custom:list-card and was wondering if the row_limit can be set to a variable number with some sort of template..

#

what I wanna do is have it expand when there are no active media players, and retract when there are..

#

I have an auto populated list of mini media players for all media players in the house below but alot of the time half the screen is just empty space, and thats kinda wastefull

pure pivot Feb 10, 2020, 5:56 PM

#

@surreal kraken that's not an addon, use #frontend-archived

surreal kraken Feb 10, 2020, 5:57 PM

#

ofcourse 🤦 srry..

jaunty mantle Feb 10, 2020, 6:01 PM

#

Hi I cannot connect to my Conbee 2 via #deconz addon i always get:
ERROR (MainThread) [asyncio] Unclosed connection
client_connection: Connection<ConnectionKey(host='172.30.33.0', port=8099, is_ssl=False, ssl=None, proxy=None, proxy_auth=None, proxy_headers_hash=None)>

#

iam running latest deconz and HA in docker on ubuntu lts 18.04.4

#

I already reinstalled the ubuntu server and even on vanilla HA i get the error

#

the addon worked fine for about a week and since yesterday everthing crashed

surreal kraken Feb 10, 2020, 6:08 PM

#

@jaunty mantle could an update of HA be the cause ?

jaunty mantle Feb 10, 2020, 6:09 PM

#

i dont know..
i updated HA a couple of days ago
Deconz was running fine then

surreal kraken Feb 10, 2020, 6:10 PM

#

but it's not that it was running fine before update and hasn't worked after updating ?

jaunty mantle Feb 10, 2020, 6:11 PM

#

I changed a usb port and everything crashed
i tried everything iam desperating
noo it worked fine after updating

surreal kraken Feb 10, 2020, 6:14 PM

#

do you specify which usb port it should use in the addon config ?

jaunty mantle Feb 10, 2020, 6:15 PM

#

yes

surreal kraken Feb 10, 2020, 6:15 PM

#

did you adjust this to point to the new usb port ?

jaunty mantle Feb 10, 2020, 6:15 PM

#

device: >-
/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2149057-if00
vnc_password: ''
dbg_aps: 1

this is the addon config

surreal kraken Feb 10, 2020, 6:21 PM

#

whats the output of
dmesg | grep tty

jaunty mantle Feb 10, 2020, 6:23 PM

#

i can access the stick, somehow. I can access the dashboard but firmware update says not connected and zigbee channel is 0. If i search for lights i dont find anything

[ 0.000000] console [tty0] enabled
[ 5.941347] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 6.232673] dw-apb-uart.1: ttyS4 at MMIO 0x9141e000 (irq = 4, base_baud = 115200) is a 16550A

surreal kraken Feb 10, 2020, 6:24 PM

#

then replace

device: >-
  /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2149057-if00```
with

device: /dev/ttyACM0```

#

fixed typo

jaunty mantle Feb 10, 2020, 6:28 PM

#

still does not work

20-02-10 18:27:04 INFO (SyncWorker_1) [hassio.docker.interface] Stop addon_core_deconz application
20-02-10 18:27:05 INFO (SyncWorker_1) [hassio.docker.interface] Clean addon_core_deconz application
20-02-10 18:27:07 INFO (SyncWorker_16) [hassio.docker.addon] Start Docker add-on homeassistant/amd64-addon-deconz with version 5.1
20-02-10 18:27:08 ERROR (MainThread) [hassio.api.ingress] Ingress error: Cannot connect to host 172.30.33.0:8099 ssl:None [Connection refused]

surreal kraken Feb 10, 2020, 6:30 PM

#

smarter people then me should help you then, that's what I could think of..

jaunty mantle Feb 10, 2020, 6:31 PM

#

thanks anyway!!

#

this is really really frustrating

stuck phoenix Feb 11, 2020, 1:28 AM

#

Im having what sounds like a similar issue, I just updated the supervisor (hassio) and now my conbee2 is not showing under devices, Im using zha not deconz but it seems like its an issue seeing the stick not the integration

jaunty mantle Feb 11, 2020, 5:48 AM

#

The integration works fine for me. The stick even shows up in the webapp but I get reconnects all the time in the deconz logs. And one out of two times, if I restart the deconz add-on, the device is not found.

jaunty mantle Feb 11, 2020, 6:28 AM

#

Weird is that not more people seem to have this Problem. I mean alot of people use these solutions and if there is a problem with a recent HA update more people would complain.

wooden flame Feb 11, 2020, 7:39 AM

#

Why can't i use secrets in add-on configs? I just tried to replace the password in the SSH addon with a !secret ssh_password instead of 'password' but the UI complains about that being invalid YAML?

modest solar Feb 11, 2020, 1:08 PM

#

Hi, just updated and I too have the issue where conbee2 nolonger works and in hassio I cant see the usb port anymore

sly kindle Feb 11, 2020, 3:33 PM

#

@wooden flame that's a bug and will be fixed

modest solar Feb 11, 2020, 4:31 PM

#

anything needed to find the usb issue?

jaunty mantle Feb 11, 2020, 4:51 PM

#

Bug by home assistant or by deconz?
The conbee works nowhere anymore

sly kindle Feb 11, 2020, 5:05 PM

#

@stuck phoenix @modest solar @jaunty mantle you should probably submit an issue at this point

jaunty mantle Feb 11, 2020, 5:06 PM

#

I bought a new one and it should arrive later. Let's see if it works and on which firmware it comes

sly kindle Feb 11, 2020, 5:06 PM

#

this happened after updating to...?

jaunty mantle Feb 11, 2020, 5:10 PM

#

No not directly
i updated and everything worked
I disconnected the stick from USB and changed to another and then the dilemma began. Zigbee channel changed to zero and it says firmware update: not connected
I almost tried everything now
It won't work in HA, not on Windows and not directly in docker without HA
I updated the firmware in docker and it still doesnt work

sly kindle Feb 11, 2020, 5:10 PM

#

hmm

jaunty mantle Feb 11, 2020, 5:11 PM

#

It just stays in the state it is
I can't connect lights or change the zigbee channel. It's stuck everywhere
I guess this is a firmware issue but I don't know how to change to an older one or reset this thing completely

#

This problem exists since Sunday

#

20-02-09 17:54:37 WARNING (MainThread) [hassio.api.ingress] Ingress for -BQb8Gtl_lbYrQ5o9cAhUqK6ZRYI-hq5ZbJv2rswpO0 not available
20-02-09 17:55:17 ERROR (MainThread) [hassio.api.ingress] Ingress error: None
20-02-09 17:56:33 ERROR (MainThread) [asyncio] Unclosed connection
client_connection: Connection<ConnectionKey(host='172.30.33.3', port=8099, is_ssl=False, ssl=None, proxy=None, proxy_auth=None, proxy_headers_hash=None)>
20-02-09 17:56:33 ERROR (MainThread) [asyncio] Unclosed connection
client_connection: Connection<ConnectionKey(host='172.30.33.3', port=8099, is_ssl=False, ssl=None, proxy=None, proxy_auth=None, proxy_headers_hash=None)>

These are the errors I get

#

From HA

#

And deconz tries to reconnect all the time

sly kindle Feb 11, 2020, 5:24 PM

#

is deconz addon up to date?

#

also HA and supervisor versions? what do you have

jaunty mantle Feb 11, 2020, 5:25 PM

#

Yes 5.1

#

200

#

And HA 105.3

#

Updated to 105.3 today

#

It died with 105.2

raven tinsel Feb 11, 2020, 5:28 PM

#

Could you share the logs for the add-on?
And please, use proper backticks to share those logs, the pasting you did above, is hard to read. If you don't know how, please use something like pastebin.

jaunty mantle Feb 11, 2020, 5:29 PM

#

Sorry! I will post this in 30 min

hard marsh Feb 11, 2020, 5:38 PM

#

is it possible to allow the grocy addon to be visible to non hassio administrators? It is not visible in the sidebar for "normal" users. Thanks. #grocy

raven tinsel Feb 11, 2020, 5:40 PM

#

@hard marsh that is currently not possible

hard marsh Feb 11, 2020, 5:41 PM

#

@hard marsh that is currently not possible
@raven tinsel Ok. Thanks for the fast reply. Great work by the way.

jaunty mantle Feb 11, 2020, 6:06 PM

#

deconz addon logs
https://pastebin.com/ZNUj2zHT

HA Logs
https://pastebin.com/thUgAchT

#

Is there somewhere a file where I can copy the full logs from deconz?
These are cutted by HA

#

20-02-11 18:07:16 ERROR (SyncWorker_18) [asyncio] Unclosed connection
client_connection: Connection<ConnectionKey(host='172.30.33.5', port=8099, is_ssl=False, ssl=None, proxy=None, proxy_auth=None, proxy_headers_hash=None)>

Another one by HA that showed up after i restarted the addon

#

I just received the new conbee and it workes out of the box
it has firmware 264A0700
I dont know what the hell happend with the other one

raven tinsel Feb 11, 2020, 6:23 PM

#

Hmz interesting

#

are you running the Home Assistant Operating System (HassOS)?

#

If so, which version?

jaunty mantle Feb 11, 2020, 6:25 PM

#

No iam running HA 0.105.3 in docker on Ubuntu lts 18.04.4

#

On an Intel nuc

weary stratus Feb 11, 2020, 6:27 PM

#

@raven tinsel I can't find the addon-mopidy on hassio, is it still in beta ?

#

I see it in https://github.com/hassio-addons , but not in the hassio addon store

raven tinsel Feb 11, 2020, 6:28 PM

#

@weary stratus That isn't stable yet

#

@jaunty mantle Have you disabled the ModemManager?

weary stratus Feb 11, 2020, 6:28 PM

#

ok, that's why ! Thx Frenck for the quick answer !!

raven tinsel Feb 11, 2020, 6:28 PM

#

@weary stratus Np

jaunty mantle Feb 11, 2020, 6:29 PM

#

Never heard of that

#

i havent installed the modem manager
how do i disable it?
and how do i check if its running?

raven tinsel Feb 11, 2020, 6:33 PM

#

https://www.home-assistant.io/hassio/installation/#alternative-install-on-a-generic-linux-host

#

see debian/ubuntu install section

jaunty mantle Feb 11, 2020, 6:41 PM

#

Failed to disable unit: Unit file ModemManage.service does not exist.

raven tinsel Feb 11, 2020, 6:42 PM

#

typo....

#

ModemManager

jaunty mantle Feb 11, 2020, 6:43 PM

#

my bad! i could remove it now

#

lets see if the old stick works now

raven tinsel Feb 11, 2020, 6:44 PM

#

I'm upgrading / change a couple of my systems now as well

#

see if I can reproduce some of the issues reported

jaunty mantle Feb 11, 2020, 6:50 PM

#

okay, the old conbee 2 is still dead

#

thanks for your help btw
your doing a great job!!

#

this thing is stuck somewhere

raven tinsel Feb 11, 2020, 6:55 PM

#

On my production system it is no issue, upgrading another system to latest at this point, see what that one does

jaunty mantle Feb 11, 2020, 7:48 PM

#

a couple of people seem to struggle since the latest supervisor update with zha/deconz
something crashed my conbee i dont know what and i hope it does not happen again
there should be an option to give this thing a "out of the box" reset
i am surprised that the new one works without problems
I already mailed dresden electronics but they havent answered yet

#

i learned that i need to have a better backup plan lol
almost 3 days without working smart lights isnt really smart haha

raven tinsel Feb 11, 2020, 7:53 PM

#

All changes are tested on our production systems.

#

multiple people in the dev team use deconz

#

I use both the Conbee 1 and conbee 2 on different setups

#

I agree there is an issue, but the root cause is unknown yet, thus we cannot conclude is because of a supervisor update

jaunty mantle Feb 11, 2020, 7:56 PM

#

yes of course you are right this was just a guess
i would understand if this conbee just died because of a hardware defect
but this seems really strange to me, as it isnt working on all platforms

rotund thistle Feb 11, 2020, 7:58 PM

#

quick ? - I am trying to check my config with the config checker add-on, but the log scrolls too far for me to get all the info on what needs to be changed (I have a Lot of groups, which I am sure is giving .105 fits). Suggestions?

#

(I am running Hassio .104 in docker on Ubuntu)

raven tinsel Feb 11, 2020, 8:02 PM

#

This is currently an open issue @rotund thistle

rotund thistle Feb 11, 2020, 8:02 PM

#

@raven tinsel thanks - and BTW, you are the man 🙂

#

any suggestions? i am tempted to upgrade and then just filter the logfile

raven tinsel Feb 11, 2020, 8:04 PM

#

LOL, I am one.. last time I looked at least 😛

#

That is a strategy... Lucky for you, we have automated rollback nowadays. So if the upgrade takes long, please be patient, it might be that the Supervisor is rolling back the upgrade because the core didn't start.

#

Make sure to create a snapshot though 🙂

rotund thistle Feb 11, 2020, 8:05 PM

#

i need to dig more into the group thing, since I use groups in AppDaemon to control and see the state of thigns, but I am sure I can get around that

#

always - snapshots are good, I also copy everything in config to tarball - learned that lesson the hardway 🙂

raven tinsel Feb 11, 2020, 8:15 PM

#

@rotund thistle I'm sure we all did FeelsBadMan

weary stratus Feb 11, 2020, 8:57 PM

#

Someone saw a FHEM add on everywhere?

#

anyone figured out how to get websockets work with mosquitto broker?

#

I get

1581455369: New connection from 192.168.0.12 on port 8883.
1581455369: OpenSSL Error: error:14094416:SSL routines:ssl3_read_bytes:sslv3 alert certificate unknown
1581455369: Socket error on client <unknown>, disconnecting.

raven tinsel Feb 11, 2020, 9:41 PM

#

@jaunty mantle Done quite a few tests and things, including a full upgrade path on a secondary system

#

but cannot break it

torpid iris Feb 11, 2020, 9:46 PM

#

i'm trying install roku but didnt apear in lovelack the image

naive spear Feb 12, 2020, 4:27 AM

#

Hi, I just installed the WireGuard addon. The installation seems to be ok, I can even reach stuff in my own lan from outside, but, when I check what's the IP address i'm coming to the world it will show the one assigned by my phone provider instead the one being used by the Hassio instalation.

Is that the expected behavior?

weary stratus Feb 12, 2020, 5:20 AM

#

Probably it's ipv6?

#

It's not expected behavior for sure

wise prism Feb 12, 2020, 7:15 AM

#

Is anyone having issues with the latest letsencrypt add on? It's failing for me now in http and DNS mode

magic cargo Feb 12, 2020, 11:26 AM

#

Any chance of this signal rest stuff being an addon @raven tinsel ? https://github.com/bbernhard/signal-cli-rest-api/blob/master/doc/HOMEASSISTANT.md

raven tinsel Feb 12, 2020, 11:38 AM

#

not by me

magic cargo Feb 12, 2020, 11:40 AM

#

Looks like my sleeves are about to be rolled up 🙂

weary stratus Feb 12, 2020, 6:52 PM

#

Hi all got a problem with mqtt setup on HassOS 3.10 / Home Assistant 0.105.3 it sees devices but doesn't add them any idea whats going on

slim spindle Feb 12, 2020, 9:03 PM

#

Would appdeamon be able to access an usb/serial device when using hassio? Or can i enable this some way ?

sly kindle Feb 12, 2020, 9:49 PM

#

@weary stratus did you add the mqtt integration?

obtuse ginkgo Feb 13, 2020, 1:26 AM

#

I have node-red installed and I only set up the credential_secret.

20-02-13 01:18:45 INFO (MainThread) [hassio.api.proxy] WebSocket access from a0d7b954_nodered
20-02-13 01:18:45 ERROR (MainThread) [hassio.api.proxy] Client error on WebSocket API Cannot connect to host 172.30.32.1:8123 ssl:False [Connection refused].

undone patio Feb 13, 2020, 7:16 AM

#

when using LetsEncrypt, what am I doing wrong that I cannot access it locally. I have tried https:// http:// with domain name and with IP Address with and with out the port 8123

#

I have a DNSMASQ entry for my domain so that it is reachable inside ,my domain

#

that worked until I used LetsEncrypt

weary stratus Feb 13, 2020, 7:28 AM

#

@sly kindle yes i have in my configuration.yaml entry
mqtt:
broker: my ha ip

orchid pumice Feb 13, 2020, 3:00 PM

#

So Mosquito Broker addon in Hassio/Home Assistant — is it expected that localhost, 127.0.0.1, “homeassistant”, “core-mosquito”, and hassio.local won’t work as the address/broker name in various other add-ons?

After a lot of trials I found “homeassistant” does work for the Ring Alarm add-on; but seemingly nothing but the actual local device IP works for node-red.

sly kindle Feb 13, 2020, 3:01 PM

#

IP address of the instance running the broker (HA's ip address)

orchid pumice Feb 13, 2020, 3:02 PM

#

I’d much prefer one of the shortcut local host options for a less brittle configuration (read that as: I know I’m going to forget and change my devices local IP at some point)

#

But why would 127.0.0.1 work when pointing to the broker in the Integration setup, and homeassistant work for the Ring Alarm addon?

sly kindle Feb 13, 2020, 3:04 PM

#

For me host names are the brittle config. mdns isn't the most stable of things and another layer. ip address is always IP address. And using IP reservation on the router for the HA instance takes care of changing ips

orchid pumice Feb 13, 2020, 3:05 PM

#

I do use IP reservation. But from past experience I know there’s a good chance it WILL change sometime in the future

sly kindle Feb 13, 2020, 3:06 PM

#

it changes...out of boredom or...?

orchid pumice Feb 13, 2020, 3:07 PM

#

Last time was equipment necessity. Google Wifi oddly initially shipped with a non-changeable 192.168.86.x scheme.

#

That’s a rare thing, I know. But I’d much rather haven’t resilient configs to lessen future potential work

#

Is it on each addon to determine how they handle broker address resolving?

orchid pumice Feb 13, 2020, 3:26 PM

#

Interestingly, if I’m seeing it right the node red documentation says to use “localhost”

weary stratus Feb 13, 2020, 3:45 PM

#

@sly kindle broker and ha same ip Yes

sly kindle Feb 13, 2020, 3:45 PM

#

@weary stratus you can just go to the integrations page and add it. no yaml

weary stratus Feb 13, 2020, 3:46 PM

#

Yes i have but no devices

#

@sly kindle This integration has no devices.

sly kindle Feb 13, 2020, 3:49 PM

#

it will show devices using discovery

#

If you add devices manually using yaml then look for them on your states page

#

But you don't need both the integration from the ui and the yaml config for mqtt:

ancient flicker Feb 13, 2020, 4:37 PM

#

Hi, i just installed Home Assistant with Docker and now i want to add Picotts with sudo apt-get install libttspico-utils. But as i installed it outside Docker it didn't work. With the Connection via ssh to the Home Assistant Container i am not able to run the command. Thanks already

raven tinsel Feb 13, 2020, 4:50 PM

#

@ancient flicker this currently an open issue. Pico TTS is currently not available on regular Home Assistant installations

ancient flicker Feb 13, 2020, 4:54 PM

#

@raven tinsel Ok Thanks

slim spindle Feb 13, 2020, 5:01 PM

#

Can i use appdeamon to access an usb port ?

weary stratus Feb 13, 2020, 5:22 PM

#

I am having truobles running ssh addon with autorized_keys. I get the error message "root@hassio.local: Permission denied (publickey,keyboard-interactive)."

I have tried every forum entry I can find (and understand) and every option I can think of. I am trying to connect from a Macbook. Using password works fine.

I have generated keys as per instructions. I have copied the public key using pbcopy. When pasting into the addon however, it separates it to a few lines after pressing save. I assume this is because of YAML formatting to a more readble format?

Can anybody think of anything else I can try?

sly kindle Feb 13, 2020, 6:12 PM

#

@weary stratus do you have both password AND key entered?

#

Have you tried removing the password

undone reef Feb 13, 2020, 6:13 PM

#

Hi, Is anyone able to help me with getting NGINX Proxy manager working? gieeting some errors now..

#

[Warning] Aborted connection 8 to db: 'unconnected' user: 'unauthenticated' host: 'localhost' (This connection closed normally without authentication)

#

[error] 1489#1489: *1 SSL_do_handshake() failed (SSL: error:1408F10B:SSL routines:ssl3_get_record:wrong version number) while SSL handshaking to upstream, client: 62.163.71.219, server: mydomain.duckdns.org, request: "GET / HTTP/2.0", upstream: "https://192.168.1.4:8123/", host: "mydomain.duckdns.org"

#

where mydomain = my own dns name

sly kindle Feb 13, 2020, 6:21 PM

#

@undone reef that first warning is fine

#

📎 unknown.png

#

config for the proxy should look like that

#

You should be forwarding 443 to 443 and 80 to 80. Are you still using the duckdns addon?

#

And do you still have this in your config? http: base_url: ssl_certificate: /ssl/fullchain.pem ssl_key: /ssl/privkey.pem

undone reef Feb 13, 2020, 6:25 PM

#

config looks exzclty like there, forwarded 443 to 443 and 80 to 80

#

disabled the http: section

#

do i need to enable it again?

sly kindle Feb 13, 2020, 6:25 PM

#

no just making sure the ssl_ lines were commented out or removed

#

if you disabled the whole thing, you might want to put it back with just the base_url

undone reef Feb 13, 2020, 6:26 PM

#

looks like this now:

#

#http:
#base_url: https:/*********.duckdns.org:8123

ssl_certificate: /ssl/fullchain.pem

ssl_key: /ssl/privkey.pem

ip_ban_enabled: true

login_attempts_threshold: 3

#

also tried this:

#

http:
base_url: https:/********.duckdns.org:8123

ssl_certificate: /ssl/fullchain.pem

ssl_key: /ssl/privkey.pem

ip_ban_enabled: true

login_attempts_threshold: 3

sly kindle Feb 13, 2020, 6:26 PM

#

  base_url: https:/*.duckdns.org```

undone reef Feb 13, 2020, 6:27 PM

#

yea thats what i tried

sly kindle Feb 13, 2020, 6:27 PM

#

it won't matter here, but later it might

undone reef Feb 13, 2020, 6:27 PM

#

aaah is see

#

you did not use a port

sly kindle Feb 13, 2020, 6:27 PM

#

yeah, but this wouldn't cause your NPM problem

#

as long as the ssl_ lines are gone

#

and in the duckdns addon, you've set accept_terms: false, yes?

#

saved, and then restarted it

undone reef Feb 13, 2020, 6:29 PM

#

actually i disabled the duckdns addon, i thought it was not needed anymore since i created ssl certificated with the nginx addon..

sly kindle Feb 13, 2020, 6:30 PM

#

ah no. still needed to acheive the duckdns domain part, but you don't need to configure it for ssl. because the Nginx addon will do that

undone reef Feb 13, 2020, 6:30 PM

#

The duckdns config now looks like this

#

lets_encrypt:
accept_terms: true
certfile: fullchain.pem
keyfile: privkey.pem
token: *
domains:

*.duckdns.org
seconds: 300

sly kindle Feb 13, 2020, 6:30 PM

#

accept terms: false

undone reef Feb 13, 2020, 6:31 PM

#

need to change it to false

#

will do

sly kindle Feb 13, 2020, 6:31 PM

#

yeah everything else can stay

weary stratus Feb 13, 2020, 6:38 PM

#

@sly kindle I haved tried both ways! But password only works when no key is entered.

tight rapids Feb 13, 2020, 6:39 PM

#

this part

  base_url: https:/*.duckdns.org
```
can you change that to

base_url: https://*.duckdns.org

or it is discord issue

#

hm looks not it looks it is in your config

sly kindle Feb 13, 2020, 6:39 PM

#

oh I copied it...yeah should be //

#

@undone reef

weary stratus Feb 13, 2020, 6:42 PM

#

@sly kindle Is pasting the public key the only option, or can I try uploading it some folder in Home assistant?

sly kindle Feb 13, 2020, 6:43 PM

#

pasting it there is all

weary stratus Feb 13, 2020, 6:46 PM

#

Ok, thanks. Ive runned out of ideas.

It atuomaticly reformats it such as:
authorized_keys:

ssh-rsa
AAA...

#

Is that normal/ok yaml?

undone reef Feb 13, 2020, 6:46 PM

#

@sly kindle so double slash? base_url: https://*.duckdns.org

sly kindle Feb 13, 2020, 6:47 PM

#

yessir

undone reef Feb 13, 2020, 6:47 PM

#

will try, after changed the duckdns config and rebooting still getting this one

#

[error] 1466#1466: *2 SSL_do_handshake() failed (SSL: error:1408F10B:SSL routines:ssl3_get_record:wrong version number) while SSL handshaking to upstream, client: (external ip), server: .duckdns.org, request: "GET / HTTP/2.0", upstream: "https://192.168.1.4:8123/", host: ".duckdns.org"

sly kindle Feb 13, 2020, 6:49 PM

#

rebooting what?

undone reef Feb 13, 2020, 6:49 PM

#

my raspberry

sly kindle Feb 13, 2020, 6:50 PM

#

ok, not a restart of HA then

undone reef Feb 13, 2020, 6:50 PM

#

well, also restarted HA that way😅

sly kindle Feb 13, 2020, 6:50 PM

#

yeah just checking. restarting HA only restarts HA and not the other addons. But rebooting the pi certainly will

undone reef Feb 13, 2020, 6:52 PM

#

now seeing this one:

#

[warn] 1458#1458: *1 using uninitialized "server" variable while logging request, client: 14.245.247.69, server: localhost-nginx-proxy-manager, request: "GET / HTTP/1.1"

#

but thats a warning..

sly kindle Feb 13, 2020, 6:55 PM

#

@undone reef screenshot of the config in NPM? I think you said it was exactly like mine, but I think it isn't

undone reef Feb 13, 2020, 6:56 PM

#

just a moment, it is hanging on the startup now..

sly kindle Feb 13, 2020, 6:56 PM

#

📎 unknown.png

undone reef Feb 13, 2020, 6:56 PM

#

[19:55:43] INFO: Starting the Manager...
[2/13/2020] [7:55:50 PM] [Migrate ] › ℹ️ info Current database version: 20190227065017
[2/13/2020] [7:55:51 PM] [IP Ranges] › ℹ️ info Fetching IP Ranges from online services...
[2/13/2020] [7:55:51 PM] [IP Ranges] › ℹ️ info Fetching https://ip-ranges.amazonaws.com/ip-ranges.json

#

not sure how long this should take

#

port forwarding looks like this:

#

uhh.. let me check out how to upload pictures lol hahahaa

sly kindle Feb 13, 2020, 7:00 PM

#

@undone reef you can't. you can paste a link to one though

#

Is it not started yet?

undone reef Feb 13, 2020, 7:01 PM

#

https://imgshare.io/image/portfroward.LcFz4

#

no, still hanging on the same message

sly kindle Feb 13, 2020, 7:01 PM

#

restart it

undone reef Feb 13, 2020, 7:01 PM

#

ok will do

#

at the portforwarding i could choos tcp , udp and tcp/udp, i choose the last one

#

so tcp/upd

#

udp

sly kindle Feb 13, 2020, 7:02 PM

#

forwarding looks fine, though you won't need 8123 if you can get this working

undone reef Feb 13, 2020, 7:03 PM

#

yea, i removed that one and was not able to reach HA anymore hahaha

#

its now at the same message hanging

#

after restart

#

wtf..

#

ah wait, maybe i know why

#

since i forwarded those ports my wifi stopped working, my laptop is connected with an ehternet cable but my raspberry is on wifi..

#

i think thats why it is not able to fetch those ip ranges

sly kindle Feb 13, 2020, 7:05 PM

#

[2/13/2020] [12:05:12 PM] [Migrate  ] › ℹ  info      Current database version: 20190227065017
[2/13/2020] [12:05:12 PM] [IP Ranges] › ℹ  info      Fetching IP Ranges from online services...
[2/13/2020] [12:05:12 PM] [IP Ranges] › ℹ  info      Fetching https://ip-ranges.amazonaws.com/ip-ranges.json
[2/13/2020] [12:05:12 PM] [IP Ranges] › ℹ  info      Fetching https://www.cloudflare.com/ips-v4
[2/13/2020] [12:05:12 PM] [IP Ranges] › ℹ  info      Fetching https://www.cloudflare.com/ips-v6
[2/13/2020] [12:05:12 PM] [SSL      ] › ℹ  info      Let's Encrypt Renewal Timer initialized
[2/13/2020] [12:05:12 PM] [IP Ranges] › ℹ  info      IP Ranges Renewal Timer initialized
[2/13/2020] [12:05:12 PM] [Global   ] › ℹ  info      PID 1426 listening on port 81 ...```

#

yours hangs at the fetching?

undone reef Feb 13, 2020, 7:07 PM

#

yea, i thinks its because the wifi stopped working when i forwarded these ports

#

will reboot my router, brb

#

ok, now the error seems to be gone

#

let me test

#

@sly kindle DUDE! i love you men! thank you sooo mutch for your time!!

sly kindle Feb 13, 2020, 7:15 PM

#

working?

undone reef Feb 13, 2020, 7:15 PM

#

yeaaaa hahaaha

#

now i should be able to remove the 8123 port forwarding right?

sly kindle Feb 13, 2020, 7:16 PM

#

you should, yeah

#

because NPM is doing that

undone reef Feb 13, 2020, 7:16 PM

#

any other things i should change now?

#

do i need to make a new DNS name for the NPM page and the HA configurator page etc...

sly kindle Feb 13, 2020, 7:17 PM

#

not that I can think of. Just make sure those are both configured to start at boot

#

duckdns and NPM

#

new dns name?

undone reef Feb 13, 2020, 7:18 PM

#

yea so i mean hassio.ducldns.org, hassioNPM.duckdns.org, hassioconfig.duckdns.org

#

so i can reach these pages from outside

sly kindle Feb 13, 2020, 7:18 PM

#

there's no real reason to have remote access to those.

#

You have remote access to the server itself

#

for configurator you can just switch on the "show in sidepanel" option

undone reef Feb 13, 2020, 7:20 PM

#

cool, can i leave this one like this? :

#

http:
base_url: https://*.duckdns.org

sly kindle Feb 13, 2020, 7:20 PM

#

yep

undone reef Feb 13, 2020, 7:21 PM

#

thanks, will remove the 8123 forwarding now and reboot everything just to be sure

sly kindle Feb 13, 2020, 7:21 PM

#

you can just remove the forwarding, no reboots or restarts should be needed

undone reef Feb 13, 2020, 7:22 PM

#

ah lemme test :p

sly kindle Feb 13, 2020, 7:22 PM

#

and you enter youduckdns.org now, not yourduckdns.org:8123

undone reef Feb 13, 2020, 7:23 PM

#

looks good, its also using https, so thats great

sly kindle Feb 13, 2020, 7:23 PM

#

super

undone reef Feb 13, 2020, 7:23 PM

#

finally can make some changes on my hassio while im in the office lol

sly kindle Feb 13, 2020, 7:23 PM

#

and your local_ip:8123 can be used also, without the https

#

(when local)

undone reef Feb 13, 2020, 7:25 PM

#

yess, also that one works

#

thank you so much men!

sly kindle Feb 13, 2020, 7:26 PM

#

if you have other servers on your network, you can also enter them as proxies.

undone reef Feb 13, 2020, 7:35 PM

#

great,

#

wil the ssl certificate automatically be renewed?

#

because its only valid for a month

weary stratus Feb 13, 2020, 8:36 PM

#

Anyone know what the 'check config' command is for the 'SSH & Web Terminal' add-on is? thanks

raven tinsel Feb 13, 2020, 8:39 PM

#

hassio ha check

weary stratus Feb 13, 2020, 8:40 PM

#

Thanks Frenck

sly kindle Feb 13, 2020, 9:09 PM

#

@undone reef yes

glacial yoke Feb 14, 2020, 5:52 AM

#

Hi all, I have been struggling with HomeAssistant for a we while now. Partly due to it's rapid change and finding a tutorial or two that is current. So far have Configurator, MQTT, sama and TasmoAdmin. Hassio is at 3.10.

#

Issue is with DuckDNS. When I start it, I get this: {
"type": "urn:ietf:params:acme:error⚱️ietf:params:acme:error:rejectedIdentifier",
"detail": "Error creating new order :: Domain name needs at least one dot",
"status": 400,
"identifier": {
"type": "dns",
"value": "5"
}

#

There are a series of these one after the other, 11 I think.

sly kindle Feb 14, 2020, 5:56 AM

#

@glacial yoke eh. What's the config for the add-on

dense spadeBOT Feb 14, 2020, 5:57 AM

#

To format your text as code, enter three backticks on the first line, press Enter for a new line, paste your code, press Enter again for another new line, and lastly three more backticks. Here's an example:

```
code here
```
Watch the animated gif here: https://bit.ly/2GbfRJE
DO NOT repeat posts. Please edit previously posted message, here is how -> https://bit.ly/2qOOf1G

glacial yoke Feb 14, 2020, 5:58 AM

#

lets_encrypt:
accept_terms: 'true'
certfile: fullchain.pem
keyfile: privkey.pem
token: '!secret duckdns_token'
domains: XXXX.duckdns.org
seconds: '300'

sly kindle Feb 14, 2020, 5:59 AM

#

the format bit up there was for you

glacial yoke Feb 14, 2020, 5:59 AM

#

looking now

sly kindle Feb 14, 2020, 5:59 AM

#

but that looks alright...

glacial yoke Feb 14, 2020, 6:01 AM

#

Is a backtick the one below the tilde?

sly kindle Feb 14, 2020, 6:01 AM

#

You restart the add-on and get the same error?

#

Yes, below the tilde

glacial yoke Feb 14, 2020, 6:03 AM

#

Yes. Even powered off and restarted Pi. Am I supposed to have those files *.pem in the SSL directory, because it's EMPTY.

sly kindle Feb 14, 2020, 6:04 AM

#

they would be generated and placed there on a successful run, yes

#

but obviously that isn't happening. Try uninstalling the add-on, then reinstalling?

glacial yoke Feb 14, 2020, 6:05 AM

#

So no successful run yet. Will do

sly kindle Feb 14, 2020, 6:10 AM

#

@glacial yoke it may sound dumb but can you confirm the domain you have at duckdns' website with what you're entering in the add-on config

glacial yoke Feb 14, 2020, 6:14 AM

#

Yes I can. When I put it into a web page, it takes me to my router (I haven't port forward yet). Baby steps.

sly kindle Feb 14, 2020, 6:15 AM

#

ok. had someone once who had made a few and then forgot which they had decided on 😛

glacial yoke Feb 14, 2020, 6:16 AM

#

I think I found the issue raised_eye . When I entered the details for domains, I overtyped the leading - (dash)

#

domains: - XXXX.duckdns.org

#

I can report I have those two files and a lot of text in the log that ends in +Done!

sly kindle Feb 14, 2020, 6:17 AM

#

oh you know, I haven't used it since the old json switched to yaml. the list hyphen is new to me

#

didn't even think about that. And now that you've mentioned it, that might be a problem I've had with authorized keys and the ssh addon

#

phone Autocorrect hates me

glacial yoke Feb 14, 2020, 6:19 AM

#

I guess they are parsing the data (to LetsEncrypt) and I screwed up the format.

sly kindle Feb 14, 2020, 6:19 AM

#

probably. so now you see OK in the logs?

#

and got the cert files?

glacial yoke Feb 14, 2020, 6:19 AM

#

DO you recommend the NGINX SSL Proxy?

#

I see OK and I have those 2 precious little files

sly kindle Feb 14, 2020, 6:20 AM

#

sure. or the nginx proxy manager add-on

glacial yoke Feb 14, 2020, 6:22 AM

#

Thanks for assistance, I'll have a look at proxy manager - you may well see me back. 👍

signal flare Feb 14, 2020, 1:49 PM

#

Hi everyone. I have problem with configuring lets encrypt addon to work via dns ovh. I couldn't find documentation on what to enter in auth fields...
I managed to find what to enter in endpoint, got application and app secret, but I have no idea about consumer key. Looking at documentation it something that (in ideal world) should be done inside add-on, but I may be wrong. Can someone point to comprehensive guide/tutorial?

coarse flume Feb 14, 2020, 2:44 PM

#

Hi. My influxdb addon keeps crashing upon starting up with an out of memory error. I'd like to investigate but it's hard since the container is no longer up once it crashes. Is there a way to configure the addon container to stay up even if there is an error when starting up influx?

remote girder Feb 14, 2020, 3:57 PM

#

Hi everyone. Ive installed hass manualy with a raspberry pi rasbian OS but i've not found any information integrate the addon Store only the hint that by manual installing the addon store is not aviable. Can I integrate this store anyhow?

raven tinsel Feb 14, 2020, 4:21 PM

#

?

jade wing Feb 14, 2020, 5:11 PM

#

If you used the venv (or Docker) methods of installing HA Core then ... you can't @remote girder

#

The only option you'd have would be to use the alternative install for HA (Hass.io as it was previously known)

weary stratus Feb 14, 2020, 5:24 PM

#

I posted yesterday about issues with the SSH addon and using keys. After pasting from vi instead of pbcopy I got it to work. But today, it's back to "permisson denied". The only difference I can see now is that in the config the key is wrapped into several rows, where as yesterday when working it was only a single row after saving. What can cause this? I am puzzled!

weary stratus Feb 14, 2020, 6:58 PM

#

Just updated MariaDB to v2.0. How can I re-open external access? I used to manage my database with 'HeidiSQL' from my computer; but connections are now blocked. Tried adding "host: '%'" to the config, but doesn't seem to work? Any ideas? 🙂

#

Never mind, missed the network settings, problem solved

pulsar rain Feb 14, 2020, 10:15 PM

#

Question on VSC add-on. I am running HA on a NUC but accessing it on a Mac using Firefox. I can drag files from my Mac file system directly into HA using VSC, but I can't drag folders (so I've just been creating the folders manually and dragging files over). Is there any way to get folders copied into HA using VSC?

obtuse cypress Feb 14, 2020, 10:30 PM

#

Hello everyone! Anyone having issues with the LetsEncrypt addon and cloudflare using the new token? Getting this error when running the addon despite only having the config with "cloudflare-dns-token" specified: Cleaning up challenges /data/dnsapikey: dns_cloudflare_email and dns_cloudflare_api_key are not needed when using an API Token

#

Config: `email: snip@snip.snip
domains:

xxxx.yyyy.zzz
certfile: fullchain.pem
keyfile: privkey.pem
challenge: dns
dns:
provider: dns-cloudflare
cloudflare_api_token: <token>
`

bronze yacht Feb 15, 2020, 12:32 AM

#

Yeah, I just joined to ask about this very issue.

#

Was trying to change my domain and letsencrypt no longer generates the files.

#

No matter if I only use the token or the email/key combo... I get that message and the process dies.

obtuse ginkgo Feb 15, 2020, 1:03 AM

#

is the portainer add on interesting?

slim spindle Feb 15, 2020, 10:29 AM

#

Anyone can help me with opening an serial connection within Appdeamon? It seems it has no access to the USB interface.

weary stratus Feb 15, 2020, 10:34 AM

#

Hi all i got a question i have installed MQTT Broker add-on its finding devices but can't see them in home assistant | (HassOS 3.10 - HA 0.105.4) | LOG-MQTT(1581761428: New client connected from xxx.xxx.xxx.xxx as DVES_E00568 (p2, c1, k30, u'mqtt').
1581761428: New connection from xxx.xxx.xxx.xxx on port 1883.)

prime storm Feb 15, 2020, 10:36 AM

#

can add-ons be used in homeassitant core?

raven tinsel Feb 15, 2020, 10:58 AM

#

@prime storm None, add-ons are not available for Home Assistant Core installations

weary stratus Feb 15, 2020, 1:26 PM

#

Hi all!

#

I'm trying to use the cec-scanner addon on a fresh hassio installation (pi3)

#

but when I start the addon it gives me the following error

#

ERROR: [ 57] RegisterLogicalAddress - CEC is being used by another application. Run "tvservice --off" and try again.
ERROR: [ 57] Open - vc_cec could not be initialised
ERROR: [ 57] could not open a connection (try 1)

dense spadeBOT Feb 15, 2020, 3:25 PM

#

@fickle sonnet posted a code wall, it is moved here --> https://paste.ubuntu.com/p/GZw5gRN4KG/

fickle sonnet Feb 15, 2020, 3:28 PM

#

Hi All. I cannot get the configurator to be able to push to a remote git repo. However when I use the same ssh method to setup the git pull addon it works well. The configurator fails with a message saying could not read username for github.com. Any help please.

obtuse ginkgo Feb 15, 2020, 7:51 PM

#

what are everyone's favorite add-ons, from the add-on store, and from HACS?

dark yoke Feb 15, 2020, 8:00 PM

#

HACS does not have add-ons 😉

#

https://github.com/hassio-addons/addon-log-viewer is my favorite

obtuse ginkgo Feb 15, 2020, 8:19 PM

#

I have UI logs integration, convenient place to see all the logs in one spot.

ember crater Feb 15, 2020, 8:33 PM

#

Hey guys looking for some advice. Im running mysql for my database and it all working with good perfomance. But its made it really hard to query for grafana.. my values dont seem to be correct

#

Can i use mysql for database and influxdb for grafana at the same time?

dark yoke Feb 15, 2020, 8:33 PM

#

yes

ember crater Feb 15, 2020, 8:34 PM

#

will there be a penalty for sending data to two locations?

dark yoke Feb 15, 2020, 8:34 PM

#

no

ember crater Feb 15, 2020, 8:34 PM

#

in performance

dark yoke Feb 15, 2020, 8:34 PM

#

well, if you are on a pi, you will notice

ember crater Feb 15, 2020, 8:35 PM

#

ok just wasnt sure. seemed kind of redundant but influxdb is much easier to find things when making grafana graphs. idk whats wrong with my sql query or if my table is even readable by grafana

#

im not its a vm

dark yoke Feb 15, 2020, 8:36 PM

#

comparing mysql and influx is like comparing elevator and planes, they are designed for different things

ember crater Feb 15, 2020, 8:36 PM

#

so my intution is somewhat correct. thank you ludeeus

#

being that mysql is just not designed for grafana on its own

#

ok if i have multiple servers reporting to my influxdb can they both go to port 8086 as long the databases are specified or should i open 8087 as well?

ember crater Feb 15, 2020, 9:12 PM

#

and i assume i can delete the homeassistant.db file once switched over to mysql?

cyan swift Feb 15, 2020, 11:20 PM

#

Question regarding "home-assistant-remote" add-on: Is it somehow possible to connect two HA's over WAN when both is running HA-core (I expect it is Hassos/Hassio - sorry if I'm wrong) - like could I have a VPN-server installed on Slave HA and a VPN-client on Master HA? (and which VPN?)

sly kindle Feb 16, 2020, 12:09 AM

#

@cyan swift there's an addon?

#

I'm using the custom component. There's no addon needed

high plume Feb 16, 2020, 2:06 AM

#

Does anyone know if hassio takes ownership of port 80 on the dockerd?

#

im trying to setup a reverse proxy for hassio and i keep getting a port 80 already in use error

#

when i do netstat -nlp | grep 80

#

i get tcp6 0 0 :::80 :::* LISTEN 1067/dockerd

#

@all any idea?

honest bloom Feb 16, 2020, 4:52 AM

#

Zerotier one add on @cyan swift, they will P2P with no Host/Client restrictions

#

They will discover each other like they would on the lan but on the virtual imaginary but very real personal cloud lan Internet thing.

#

Words can not describe how amazing Zerotier one is

dense spadeBOT Feb 16, 2020, 10:24 AM

#

@honest arrow posted a code wall, it is moved here --> https://paste.ubuntu.com/p/SM7bKfY8br/

honest arrow Feb 16, 2020, 10:26 AM

#

Hi there, I got some problems. HassBot moved my text to: https://paste.ubuntu.com/p/SM7bKfY8br/ - can someone help me? would be nice!

manic fox Feb 16, 2020, 10:42 AM

#

@honest arrow you only need to forward the port that HA is running on. If it is 8123 then 8123

placid fulcrum Feb 16, 2020, 10:47 AM

#

I have a fresh HA install, don't want to restore a backup due to it being a mess from trying things. I forgot which add-ons I had installed, I do have a full backup from my previous install, are the added repositories stored in a config file somewhere?

manic fox Feb 16, 2020, 10:54 AM

#

yes the core folder within add-ons. for hacs, it will be custom_components

honest arrow Feb 16, 2020, 11:05 AM

#

@manic fox so something like https://domain.tld doesn't work? i guess it is ok to work with domain.tld:8123 as well.

manic fox Feb 16, 2020, 11:10 AM

#

If you are using duckdns. You need to use their domain name ending with duckdns.org:8123

remote girder Feb 16, 2020, 11:11 AM

#

Hello everyone. Short question i want to use DuckDNS and set up anything. But by checking the configuration i get the error, Invalid config for [http]: [api_password] is an invalid option for [http]. Check: http->http->api_password. (See /config/configuration.yaml, line 12). but in my opinion i set up the secret correctly in the secret.yaml what did i wrong ?

manic fox Feb 16, 2020, 11:32 AM

#

you have api_password defined under http ? check your config

raven tinsel Feb 16, 2020, 11:35 AM

#

@remote girder the api password isn’t used anymore and should be removed from your configuration

remote girder Feb 16, 2020, 11:38 AM

#

@raven tinsel Thank you very much

raven tinsel Feb 16, 2020, 11:38 AM

#

No problem sir 👍

thin shadow Feb 16, 2020, 11:49 AM

#

hi, can anyone help me with grafana on raspberry pi3 latest hassio, it seems i'm hitting some sort of time-out on s6-svwait

#

i have enabled debug and this is all i'm geting

#

t=2020-02-16T13:48:24+0200 lvl=dbug msg="Executing migration condition sql" logger=migrator id="Add index for epoch_end" sql="SELECT 1 FROM sqlite_master WHERE type='index' AND tbl_name=? AND name=?" args="[annotation IDX_annotation_org_id_epoch_epoch_end]"
t=2020-02-16T13:48:24+0200 lvl=dbug msg="Executing sql migration" logger=migrator id="Add index for epoch_end" sql="CREATE INDEX IDX_annotation_org_id_epoch_epoch_end ON annotation (org_id,epoch,epoch_end);"
s6-svwait: fatal: timed out
[s6-finish] sending all processes the TERM signal.
t=2020-02-16T13:48:27+0200 lvl=info msg="Shutdown started" logger=server reason="System signal: terminated"

indigo prawn Feb 16, 2020, 4:45 PM

#

Hey I just Updated from 103.x to latest 105.x version and my webostv stoped working... Its saying im having invalid config but it worked earlier very fine. What has changed in 105.x that i should change in my config?

raven tinsel Feb 16, 2020, 5:06 PM

#

@indigo prawn It changed in 0.104

#

have you read the breaking changes for 0.104?

#

https://www.home-assistant.io/blog/2020/01/15/release-104/#breaking-changes

main wigeon Feb 16, 2020, 5:15 PM

#

Hey guys! I’m having trouble finding the "Network UPS Tools" add-on in the Home Assistant add-on store even though I have added the repo it needs.

raven tinsel Feb 16, 2020, 5:16 PM

#

@main wigeon That add-on isn't released yet

main wigeon Feb 16, 2020, 5:16 PM

#

Is there a way to install it anyway?

raven tinsel Feb 16, 2020, 5:17 PM

#

yes sure, we have a development repository you could add, however, thing might and will break over time when using that

main wigeon Feb 16, 2020, 5:17 PM

#

Sounds great!

#

Where can I find the repo url?

raven tinsel Feb 16, 2020, 5:17 PM

#

The breaking part did the trick huh? 😂

#

https://github.com/hassio-addons/repository-edge

main wigeon Feb 16, 2020, 5:17 PM

#

If it works it works 😂

#

Hmm for now it seems not to be even running with errors 😕

sour pasture Feb 16, 2020, 5:36 PM

#

hi

#

I've installed my new deconz stick and the basics are working. I added few bulbs for start (philips & ikea) and a wireless switch (philips - on, of, up, down) but I can't setup anything with the switch. The switch doesn't work and also I don't see any options to edit something except for adding bulbs to the switch. but the switch does nothing. In Hass.io I only see the battery state of the switch. also in hass.io there's nothing what I could set up. any hints?

#

I'm not sure this even belongs in here

cunning raptor Feb 16, 2020, 7:16 PM

#

so i'm getting a segmentation fault when trying to launch the CEC Scanner addon. any suggestions? i'm not finding any documentation for configs for it, so i'm kinda at a loss.

device #1: Recorder 1
address:       1.0.0.0
active source: no
vendor:        Pulse Eight
osd string:    CECTester
CEC version:   1.4
power status:  on
language:      eng
currently active source: unknown (-1)
/run.sh: line 5:    12 Done                    echo scan
        13 Segmentation fault      (core dumped) | cec-client -s -d 1```

errant sandal Feb 16, 2020, 8:55 PM

#

@raven tinsel just installed vscode on pi4 🙂 I love it! Thank you very much!

raven tinsel Feb 16, 2020, 8:58 PM

#

🎉

#

Glad you like it sir! Thanks for letting me know 🙂

obtuse ginkgo Feb 16, 2020, 9:04 PM

#

@raven tinsel also, I like dogs better than cats. 😛

raven tinsel Feb 16, 2020, 9:04 PM

#

Sorry m8, cannot agree 🙂

obtuse ginkgo Feb 16, 2020, 9:37 PM

#

hahahaha

#

you need more cats on your live streams

rapid adder Feb 16, 2020, 10:10 PM

#

Hi everyone, I've just installed Samba Share and I can see it in my network but it comes up with an error message saying check spelling.

#

Any ideas?

jolly moth Feb 17, 2020, 12:21 AM

#

WARNING (MainThread) [hassio.api.ingress] No valid ingress session None

#

any idea what could be causing this error?

#

its filling up my system lig

#

*log

jolly moth Feb 17, 2020, 1:00 AM

#

anyone?

last mica Feb 17, 2020, 1:19 AM

#

Ok I need some serious support I have some how borked the networking to my homeassistant. I installed nginx proxy manager and since then my external connection to homeassistant is broken

#

how do I savely remove nginx proxy addon

last mica Feb 17, 2020, 1:36 AM

#

figured it out

rapid adder Feb 17, 2020, 5:08 AM

#

Anyone a able to help keep getting a network error message when trying to open HASSIO through Samba on my Desktop.

safe bridge Feb 17, 2020, 8:15 AM

#

I got this error when trying to install phpMyAdmin:
https://pastebin.com/eenxgPrA

Anyone know what's up?

raven tinsel Feb 17, 2020, 8:57 AM

#

@safe bridge Your MariaDB add-on is outdated

#

MariaDB add-on 2.0+ enable services

#

it seems like you have an older version of the MariaDB add-on in that case

#

(thus phpMyAdmin cannot find it)

safe bridge Feb 17, 2020, 9:01 AM

#

Ahh, haven't learned how a new update looks like 😂

#

Thank you.

hybrid sparrow Feb 17, 2020, 9:34 AM

#

custom_components.hacs.hacsbase.exceptions.HacsException: GitHub returned 403 for https://api.github.com/repos/hacs/integration

#

There is some problem with hacs server?

haughty bridge Feb 17, 2020, 9:46 AM

#

@hybrid sparrow I have no issue using that url. Also, thats a github api url 🙂

dark yoke Feb 17, 2020, 11:21 AM

#

Hacs server is GitHub @hybrid sparrow , and it's not an add-on so use #609399695466430465 or #integrations-archived

cyan swift Feb 17, 2020, 11:35 AM

#

@sly kindle So you say that the home-assistant-remote can communicate over wan without VPN (that sounds great)?

#

@honest bloom Thanks I will take a look at Zerotier one add on - to see if I can get my two HA's talking to each other over wan - I simply have a few sensors on the "slave" HA that I want to check and make zone action upon on my Master HA

cyan swift Feb 17, 2020, 2:16 PM

#

@sly kindle After setting up a shared network with Zerotier I now have connection over wan with my master and slave HA - but when I try to HA-remote I get this error in my log [custom_components.remote_homeassistant] Could not connect to ws://http://192.168.194.29:8123/api/websocket, "

honest bloom Feb 17, 2020, 2:25 PM

#

You need to connect to the Zerotier one IP address

#

You should probably set up a static for each device from the Zerotier one website

cyan swift Feb 17, 2020, 2:29 PM

#

@honest bloom OK but it looks like I have a static IP in Zerotier one and I can see both are connected and I can ping Slave HA from Master HA ssh

#

but if I try curl SlaveHA-ip:8123 from MasterHA terminal I get "curl (52) Empty reply from server"

broken zenith Feb 17, 2020, 2:31 PM

#

Hey, I have a domain on namecheap. How would I go about setting up external access with Lets Encrypt certificates for that in the simplest way?
I see that the DuckDNS add-on supports encryption. Seems a bit stupid to point my namecheap dns to duckdns though?

#

Looks like it is rather simple to take the Duck DNS Lets Encrypt client and generalize it so that it is not limited to simply DuckDNS? :o'

#

HEY. It is right here! https://github.com/home-assistant/hassio-addons/tree/master/letsencrypt

#

😂

cyan swift Feb 17, 2020, 3:28 PM

#

@honest bloom wow It works - now I can see my slave HA sensors on my Master HA - this is so great - thanks

dense spadeBOT Feb 17, 2020, 3:39 PM

#

@ionic patio posted a code wall, it is moved here --> https://paste.ubuntu.com/p/qFRdQGv485/

ionic patio Feb 17, 2020, 3:40 PM

#

Can you help me, the mysql addon does't work.

broken zenith Feb 17, 2020, 3:52 PM

#

I have an issue getting Lets Encrypt running now. 😦 Do anyone have any idea?

 - The following errors were reported by the server:
   Domain: my-domain.tld
   Type:   unauthorized
   Detail: Invalid response from
   http://my-domain.tld/.well-known/acme-challenge/EViM35rUyHFkEj1nmS1Ya0TTj24f3hXm5Zw2mVxZs2M
   [my-ip-addr]: 404
   To fix these errors, please make sure that your domain name was
   entered correctly and the DNS A/AAAA record(s) for that domain
   contain(s) the right IP address.

honest bloom Feb 17, 2020, 4:22 PM

#

did you port foward?

weary stratus Feb 17, 2020, 4:49 PM

#

anyone could help me with samba?

tropic crag Feb 17, 2020, 4:52 PM

#

@ionic patio you say your issue is the mysql add-on not starting, yet you share the logs of the phpMyAdmin add-on.

final slate Feb 17, 2020, 5:02 PM

#

Hi. It ry to config duckdns with SSL certificate (so I can use https://mydomaine.duckdns.com:8123). The link work (ping mydomaine.duckdns.com response with the right IP adresse). Via Chrome, the https://mydomaine.duckdns.com:8123 give me ERR_SSL_PROTOCOL_ERROR. Port Forwarding is configurated on my router. Any idea?

tropic crag Feb 17, 2020, 5:05 PM

#

Did you set the 'http:' configuration.yaml per the add-on docks?

final slate Feb 17, 2020, 5:06 PM

#

My configuration.yaml look like this:http: base_url: https://mydomaine.duckdns.org:8123 ssl_certificate: /ssl/fullchain.pem ssl_key: /ssl/privkey.pem

white sierra Feb 17, 2020, 5:09 PM

#

I have the same issue.

#

I'm tring to setup Smarthings but cannot get the https to work inside a docker instance.

final slate Feb 17, 2020, 5:14 PM

#

With "duckdns", do I need to install "Let’s Encrypt" too?

white sierra Feb 17, 2020, 5:15 PM

#

I worked on this all weekend with nginx and nginx manager but to no avail.

#

cfiset are you in a docker type of setup?

#

That is the environment I'm in.

final slate Feb 17, 2020, 5:17 PM

#

@white sierra , do you try to forward port 443 to your right IP?

white sierra Feb 17, 2020, 5:18 PM

#

Yes, duckdns is setup and checking in. I have the internal IP setup as a DHCP static IP.

final slate Feb 17, 2020, 5:18 PM

#

I "think" I don't use docker. I use hassio on a RasberryPI3

white sierra Feb 17, 2020, 5:19 PM

#

Ok hmm. Just seems strange. I'm really scratching my head on this one. I really want hassio (smarthings) to work together.

#

Just the darn https needs to be in place for the token to be accepted.

final slate Feb 17, 2020, 5:20 PM

#

@white sierra , I understand, I try to do the sameting!

white sierra Feb 17, 2020, 5:20 PM

#

I wonder if something else is not working right.. In the video's they make it seem so strait forrward.

final slate Feb 17, 2020, 5:21 PM

#

Me too. "Should" be easy!

#

but look like, someting's not working...

white sierra Feb 17, 2020, 5:22 PM

#

Anyone else having this issue or seen a work around?

final slate Feb 17, 2020, 5:23 PM

#

Without SSL work fine (http://mydomaine.duckdns.org:8123)

#

it's the SSL issues I have right now...

white sierra Feb 17, 2020, 5:24 PM

#

Same here. That is why I tried the nginx manager method but that just generated expired ssl tickets.

torn juniper Feb 17, 2020, 5:28 PM

#

I can see that Xiaomi plugins are available, but I cannot see them in my Haas instance. Is it normal? https://www.home-assistant.io/integrations/#search/Xiaomi

white sierra Feb 17, 2020, 5:28 PM

#

@final slate Anything special you have tried? I have even tried a docker image in synology.

final slate Feb 17, 2020, 5:32 PM

#

@white sierra I did try anyting special. I looking if I can install NGINX on my hassio

white sierra Feb 17, 2020, 5:37 PM

#

@final slate Hope that helps.

final slate Feb 17, 2020, 5:55 PM

#

@white sierra look like it's not working... Maybe this is something about SSL itself

sly kindle Feb 17, 2020, 5:56 PM

#

@final slate share your http: configuration again with formatting? And include a couple lines from right above it

#

@torn juniper those are integrations. Add-ons are not the same thing

#

@weary stratus what is happening with samba?

final slate Feb 17, 2020, 5:59 PM

#

# Configure a default setup of Home Assistant (frontend, api, etc)
default_config:

# Uncomment this if you are using SSL/TLS, running in Docker container, etc.
 http:
   base_url: https://mydomaine.duckdns.org:8123
   ssl_certificate: /ssl/fullchain.pem
   ssl_key: /ssl/privkey.pem
   

# Text to speech
tts:
  - platform: google_translate

sly kindle Feb 17, 2020, 6:00 PM

#

your http: config is not recognized because you have a space in front of http:

#

You need to fix that, and the lines below it needs two spaces indentation

#

When it configured correctly, you won't be able to use http://

#

You'll only be able to use https://

#

@final slate did I lose you?

final slate Feb 17, 2020, 6:03 PM

#

No, I'm testing right now; need to reboot my hassio

sly kindle Feb 17, 2020, 6:03 PM

#

you don't need to reboot you just need to restart home assistant

white sierra Feb 17, 2020, 6:03 PM

#

I tried this but to no avail. Does anything need to be changed in docker?

#

The spacing piece.

sly kindle Feb 17, 2020, 6:04 PM

#

@white sierra I don't know that your problem is the same problem

#

you said you were using nginx

white sierra Feb 17, 2020, 6:04 PM

#

I agree. It is not a spacing issue.

sly kindle Feb 17, 2020, 6:05 PM

#

if you are using nginx proxy manager addon you shouldn't even have those lines

final slate Feb 17, 2020, 6:05 PM

#

It's better, but look like a issues with certificate is invalid

sly kindle Feb 17, 2020, 6:06 PM

#

@final slate if you are entering https://local_ip:8123 it is invalid, yes

final slate Feb 17, 2020, 6:06 PM

#

I need to regenerate the certificate

sly kindle Feb 17, 2020, 6:06 PM

#

it is not valid for the local IP address

#

it is only valid for your duck DNS domain

torn juniper Feb 17, 2020, 6:07 PM

#

@torn juniper those are integrations. Add-ons are not the same thing
@sly kindle
So how can I find devices in my local network or enable the integration?

sly kindle Feb 17, 2020, 6:08 PM

#

@torn juniper Read the documentation for the integration you are interested in (on the page you linked). every integration tells you what to do and what to add to your configuration.yaml

final slate Feb 17, 2020, 6:08 PM

#

Ok, but I test a other duckdns hostname, I will need to regenerate the certificate for mydomaine.duckdns.org

#

instead mytest.duckdns.org

torn juniper Feb 17, 2020, 6:09 PM

#

@torn juniper Read the documentation for the integration you are interested in (on the page you linked). every integration tells you what to do and what to add to your configuration.yaml
@sly kindle
Ok, already done this, but with no visible effect. I'll move the conversation to #integrations-archived Thanks

final slate Feb 17, 2020, 6:11 PM

#

@sly kindle thank for the help. Look good now!

white sierra Feb 17, 2020, 6:21 PM

#

Ok so testing from my phone I accept the ssl but then get a error 404 page not found page.

#

This is generated from the server. So I'm now only using nginx.

#

This is my configuartion.yaml

#

I removed the baseURL from the configuration.yaml

#

Still a no go.

sly kindle Feb 17, 2020, 6:57 PM

#

@white sierra nginx proxy manager? nginx home assistant ssl proxy?

golden lynx Feb 17, 2020, 7:12 PM

#

Hi all! I'm having trouble with the official Deconz add-on. RPi4, vanilla Hassio install on brand new sd-card. I'm getting this error message in the hypervisor logs:

#

20-02-17 19:07:12 ERROR (SyncWorker_13) [hassio.docker] Can't start addon_core_deconz: 500 Server Error: Internal Server Error ("error gathering device information while adding custom device "/dev/bus/usb": no such file or directory")

#

The older Deconz add-on made by Marthoc, works.

#

I'm at a loss how to proceed from here, I've tried everything under the sun to get this running on my Pi4. config.txt is edited and the Raspbee shows up as ttyS0 just as before the crash.

calm edge Feb 17, 2020, 9:07 PM

#

Hi All!
I would like to use my MQTT Server & Web client addon, but I can't connect my running mqtt broker.
When I try to connect via HiveMQ in chome I get this error in console:
WebSocket connection to 'ws://192.168.210.60:1884/mqtt' failed: Error in connection establishment: net::ERR_SSL_PROTOCOL_ERROR

#

And I think is worked it before

#

What I doing wrong?

#

Can anybody help me a bit?

raven tinsel Feb 17, 2020, 9:22 PM

#

@calm edge I would recommend to go with the Mosquitto add-on

#

the MQTT Server & Web Client add-on will be deprecated soon.

calm edge Feb 17, 2020, 9:29 PM

#

😮

#

Thank you for your advance!

#

I use this one: Mosquitto MQTT Server bundled with Hivemq's web client.

#

What is the best web client?

dark yoke Feb 17, 2020, 9:42 PM

#

Home Assistant, the MQTT tab under developer tools

calm edge Feb 17, 2020, 9:45 PM

#

... 😦 I think that is not the 'best' that is simple...

raven tinsel Feb 17, 2020, 9:54 PM

#

MQTT explorer imho

dense spadeBOT Feb 18, 2020, 5:59 AM

#

@trail otter posted a code wall, it is moved here --> https://paste.ubuntu.com/p/HHPfpXsSBV/

trail otter Feb 18, 2020, 6:00 AM

#

sorry, new also to discord, don't know to display probably the log mildpanic

#

+ Account already registered!
[07:02:39] INFO: KO
# INFO: Using main config file /data/workdir/config
Processing x with alternative names: x x x x x x x x x x . d u c k d n s . o r g
 + Signing domains...
 + Generating private key...
[and then a serie of error disclaimer, letter by letter, like this]
 {
      "type": "urn:ietf:params:acme:error⚱️ietf:params:acme:error:rejectedIdentifier",
      "detail": "Error creating new order :: Domain name needs at least one dot",
      "status": 400,
      "identifier": {
        "type": "dns",
        "value": "f"
      }
    },

remote oriole Feb 18, 2020, 7:37 AM

#

@trail otter I never set up duckdns so i can't help too much, but here is recent video of setting it up along with some other stuff that may help you understand how to resolve your issue. https://youtu.be/hqRT2VKhxJ0

trail otter Feb 18, 2020, 7:50 AM

#

Thanks. Maybe i think i have an issue because of my set up. My HA box is set on a google wifi. But my google wifi get its internet connection from my ISP box. So i sat up a static ip and the port redirection in the google wifi, but not in the isp box, maybe i have to do that too ? (noob inside, sorry)

remote oriole Feb 18, 2020, 7:54 AM

#

usually the ISP modem/(router) is set as a passthrough. so as long as your google wifi is set as the dhcp and not the modem you should be ok

#

here's a post talking about a possible issue you may be experincing and how to correct it if it is. https://support.google.com/googlenest/thread/1339276?hl=en&msgid=8220546

undone copper Feb 18, 2020, 9:35 AM

#

hi! Configurator, new File Editor after update not working!

raven tinsel Feb 18, 2020, 10:03 AM

#

@undone copper Please update to 4.5

native hull Feb 18, 2020, 10:09 AM

#

Ho hi guys, @raven tinsel . Got the same issue. How can I update ? HA doesn't offer me the choice.

raven tinsel Feb 18, 2020, 10:10 AM

#

If the update doesn't show up yet, go to the add-on store, hit the refresh icon in the top right

native hull Feb 18, 2020, 10:12 AM

#

Well it appears now. Had to insist though. Thanks Frenck

raven tinsel Feb 18, 2020, 10:13 AM

#

👍

native hull Feb 18, 2020, 10:18 AM

#

Another question, is there possibility to help developing/checking on integrations ?

#

Forget it I found them in GitHub 😁

trail otter Feb 18, 2020, 10:35 AM

#

here's a post talking about a possible issue you may be experincing and how to correct it if it is. https://support.google.com/googlenest/thread/1339276?hl=en&msgid=8220546
@remote oriole Thanks . It seems my isp router has a built-in bridge feature who could do the trick...at a price nethertheless. It appears i will lost some other minor features. I will give it a try. many thanks

undone copper Feb 18, 2020, 10:36 AM

#

@raven tinsel update for version 4.5 is not displayed 😕

night finch Feb 18, 2020, 10:36 AM

#

Ok, the last update from File Editor (configutator) screwed it up for me

raven tinsel Feb 18, 2020, 10:36 AM

#

@undone copper refresh the add-on store

#

@night finch Read up, 4.5 is out, update 🙂

night finch Feb 18, 2020, 10:37 AM

#

Lol fixed indeed now

#

I just updated the addon and didnt think in a few minutes a new release would show up

#

Good work!

undone copper Feb 18, 2020, 10:42 AM

#

@raven tinsel thanks a lot! update appeared

#

@raven tinsel File Editor works again!

#

👍

clever spire Feb 18, 2020, 12:10 PM

#

https://community.home-assistant.io/t/file-editor-broken-since-update-4-4/172711

#

I have the same problem

#

https://github.com/home-assistant/hassio-addons/tree/master/configurator

raven tinsel Feb 18, 2020, 1:04 PM

#

@clever spire Have you read previous things above?

pulsar rain Feb 18, 2020, 2:33 PM

#

i am trying to reinstall Influxdb using addon(used it a few years ago, but not with any recent versions of HA). All seems to have gone properly, but when i try a query only my darksky, lennox and sun entities are showing up under States, not all my expected sensors. Will they just take a while to show up (i.e. next time they report a changed value) or am I likely missing something?

#

disregard....they are showing up bit by bit

crystal kestrel Feb 18, 2020, 3:21 PM

#

@calm edge I would recommend to go with the Mosquitto add-on
@raven tinsel you mean "Mosquitto broker"?

raven tinsel Feb 18, 2020, 3:21 PM

#

yes

sly kindle Feb 18, 2020, 3:25 PM

#

@trail otter check that your domain is added in the addon config like this: ```domains:

yourdomain.duckdns.org```

#

and not domains: yourdomain.duckdns.org

obtuse crow Feb 18, 2020, 4:02 PM

#

Morning everyone. Yesterday, I upgraded both HA and Mariadb to the latest versions. Now, there seems to be an issue with mariadb and allowing remote connections and for the life of me I can't figure out what is going on. I have tried rebuilding the mariadb container, tried adding a new user who should be able to remote connect, etc. etc. Anyone else expereincing challenges with the most recent upgrade in the mariadb addon?

#

PS - from the container I can log into mysql and everything looks is fine (passwords, privs. etc). The only issue is allowing remote connections.

raven tinsel Feb 18, 2020, 4:38 PM

#

@obtuse crow are you using ‘core-mariadb’ as the hostname to connect to in Home Assistant? Sounds like you are not...

west flume Feb 18, 2020, 4:38 PM

#

has any one seen /run.sh: line 81: DNS_PROVIDER: unbound variable

#

i am trying to run Let's Encrypt. to get a ssl certe mail: d.acklin@dragoncis.com
domains:

'*.dragoncis.com'
certfile: fullchain.pem
keyfile: privkey.pem
challenge: dns
dns:
provider: dns-google
google_creds: google.json

subtle locust Feb 18, 2020, 4:39 PM

#

Looking to see how to configure the NGINX Add-On with HA so that I can connect to the local hassio instance over HTTPS (instead of HTTP). I want to keep HTTPS as an option for local access

#

Basically looking to change this spot in the default config:

        location / {
            proxy_pass http://homeassistant.local.hass.io:8123;
            proxy_set_header Host $host;
            proxy_redirect http:// https://;
            proxy_http_version 1.1;
            proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
            proxy_set_header Upgrade $http_upgrade;
            proxy_set_header Connection $connection_upgrade;
        }```

raven tinsel Feb 18, 2020, 4:47 PM

#

@west flume That is a bug

#

diving in

obtuse crow Feb 18, 2020, 4:47 PM

#

@raven tinsel - how/where do I check that? Additionally, I used to be able to connect to it from dbforge(a windows based type phpmyadmin) & from my remote linux box - both can't connect either.

raven tinsel Feb 18, 2020, 4:48 PM

#

@obtuse crow The remote port is closed by default now, you can open it up / assign it in the add-on settings page ("Network" section)

#

@obtuse crow You have to make sure your db_url in the recorder settings of Home Assistant uses core-mariadb as the host to connect to.

#

@subtle locust Looks like the default to me?

obtuse crow Feb 18, 2020, 4:50 PM

#

So something like this:
mysql://user:pass@core-mariadb/dbase?charset=utf8

subtle locust Feb 18, 2020, 4:52 PM

#

@raven tinsel Well yeah, i need to change that block to something like:

        location / {
            proxy_pass https://homeassistant.local.hass.io:8123;
            proxy_set_header Host $host;
            # proxy_redirect https:// https://;
            proxy_http_version 1.1;
            proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
            proxy_set_header Upgrade $http_upgrade;
            proxy_set_header Connection $connection_upgrade;
        }```

#

specifically proxy_pass https://

obtuse crow Feb 18, 2020, 4:52 PM

#

@raven tinsel - ah yes ... I see the change now in the config page.

raven tinsel Feb 18, 2020, 4:53 PM

#

@subtle locust Sorry, but that makes no sense

#

why would you do that?

subtle locust Feb 18, 2020, 4:53 PM

#

I want SSL for both local and remote

raven tinsel Feb 18, 2020, 4:53 PM

#

so access your instance both local and remote via the proxy?

subtle locust Feb 18, 2020, 4:54 PM

#

no, remote is through the proxy, local is not

#

Externally I use 443 for something else

raven tinsel Feb 18, 2020, 4:54 PM

#

why even use a proxy?

#

like the proxy is for offloading SSL

subtle locust Feb 18, 2020, 4:55 PM

#

I don't want to broadcast my Python https server out to the world since it doesn't have a concept of a "default" reject

raven tinsel Feb 18, 2020, 4:55 PM

#

that is correct, it is not a firewall

subtle locust Feb 18, 2020, 4:55 PM

#

if you connect to HA python https server without SNI, it will give you the cert/ hostname

#

i'd prefer it not do that, and require someone know the hostname they're connecting to

#

so, if someone starts portscanning for 8123...

#

or whatever port it's published as

raven tinsel Feb 18, 2020, 4:56 PM

#

Ok I get that part

#

but it doesn't add up why HA itself should run SSL as well

subtle locust Feb 18, 2020, 4:57 PM

#

Well, I also want to use direct to 8123 over ssl as well

#

locally

raven tinsel Feb 18, 2020, 4:57 PM

#

yeah so, why not use the same proxy for that?
;S

#

that is the part I don't get

subtle locust Feb 18, 2020, 4:57 PM

#

ideally I use the same name

#

Split DNS

raven tinsel Feb 18, 2020, 4:58 PM

#

yep

#

or separate, using a second vhost with the same upstream

subtle locust Feb 18, 2020, 4:58 PM

#

port is 8123 outside

#

which port maps to 443 to HA NGINX

raven tinsel Feb 18, 2020, 4:58 PM

#

ok

#

well you can use custom config files

subtle locust Feb 18, 2020, 4:58 PM

#

silly problem

raven tinsel Feb 18, 2020, 4:59 PM

#

https://github.com/home-assistant/hassio-addons/tree/master/nginx_proxy#configuration

#

enable customize.active

#

and specify the folder & folders it should load your nginx files from

subtle locust Feb 18, 2020, 4:59 PM

#

and the format of that file, location / {
proxy_pass https://homeassistant.local.hass.io:8123;
proxy_set_header Host $host;
proxy_redirect https:// https://;
proxy_http_version 1.1;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection $connection_upgrade;
}

raven tinsel Feb 18, 2020, 4:59 PM

#

the files must be in /share/ as the base path

#

there is no specific format but the add-on it loads the files up in nginx

#

whatever nginx can accept will do

subtle locust Feb 18, 2020, 5:00 PM

#

yeah, that's what I was trying to figure out, based on where it was injected.

#

so if: location / { proxy_pass https://homeassistant.local.hass.io:8123; proxy_set_header Host $host; proxy_redirect https:// https://; proxy_http_version 1.1; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Upgrade $http_upgrade; proxy_set_header Connection $connection_upgrade; } is already specified

raven tinsel Feb 18, 2020, 5:02 PM

#

customize.default is loaded for the default location, the other after it

#

https://github.com/home-assistant/hassio-addons/blob/master/nginx_proxy/data/nginx.conf#L54
https://github.com/home-assistant/hassio-addons/blob/master/nginx_proxy/data/nginx.conf#L67

#

so nginx_proxy_default is part of the server directive, while the others are loaded part of the http directive in the end

obtuse crow Feb 18, 2020, 5:09 PM

#

@raven tinsel Can you give me a bit more insight into the network section for mariadb - I do need to grant remote access to this docker and there doesn't seem to be any docs in the add-on config section on "network".

#

docker = container

raven tinsel Feb 18, 2020, 5:09 PM

#

📎 unknown.png

obtuse crow Feb 18, 2020, 5:09 PM

#

lol

#

Dohh.

#

Ok - thought it went into the actual config section - LOL. Sorry. my bad

raven tinsel Feb 18, 2020, 5:10 PM

#

haha don't worry 😄

#

I should use screenshots more 🙂

obtuse crow Feb 18, 2020, 5:10 PM

#

rtfm

#

LOL

raven tinsel Feb 18, 2020, 5:10 PM

#

like a picture says more than a thousand words right?

#

(although it takes up 50 thousand times the disk space 🤔 )

obtuse crow Feb 18, 2020, 5:11 PM

#

absolutely. Things are changing so fast with this software - AMAZING. Hard to keep up with all the changes though.

#

hahahaha - true true

raven tinsel Feb 18, 2020, 5:11 PM

#

I agree, we are moving fast now

#

but there is a more general and uniform concept slowly showing

#

so that is a good thing

obtuse crow Feb 18, 2020, 5:12 PM

#

absolutley!

#

@raven tinsel - sorry blonde moment ... to enable it to put the port (3306)

raven tinsel Feb 18, 2020, 5:18 PM

#

yes

#

hit save and restart (the add-on)

obtuse crow Feb 18, 2020, 5:21 PM

#

👌

#

by the way your integration of Visual studio is AWESOME

#

I just switched to it from Cloud9

#

It makes it soooo easy to edit/manage/git the files.

subtle locust Feb 18, 2020, 5:38 PM

#

@raven tinsel it would just be great if one were able to present a substitute .conf file for NGINX vs trying to work around the two insertion points. Say if someone wanted to change ciphers, etc... not really a way to do that without making a totally custom add-on.

trail otter Feb 18, 2020, 5:43 PM

#

and not domains: yourdomain.duckdns.org
@sly kindle
@trail otter check that your domain is added in the addon config like this: ```domains:

yourdomain.duckdns.org```
@sly kindle LIFE SAVIOR HERE 👍 👍 Thanks dude. Works on first attempt !

sly kindle Feb 18, 2020, 5:44 PM

#

🎉

raven tinsel Feb 18, 2020, 5:46 PM

#

@subtle locust Honestly, if you just want your own configuration

#

build your own add-on is probably easier

#

@obtuse crow Your welcome, v2.1.0 is inbound, reducing CPU & Memory drastically 🙂

neat lily Feb 18, 2020, 6:25 PM

#

I am in the right place for a question regarding https://github.com/home-assistant/hassio-addons/tree/master/letsencrypt ?

full gate Feb 18, 2020, 6:33 PM

#

@neat lily yep!

neat lily Feb 18, 2020, 6:34 PM

#

great. I experience https://github.com/home-assistant/hassio-addons/issues/1102 and that's fine. Something in the new version I guess. But when I restore the old version (4.5) it says

Traceback (most recent call last):
  File "/usr/local/lib/python3.7/site-packages/certbot/_internal/renewal.py", line 63, in _reconstitute
    renewal_candidate = storage.RenewableCert(full_path, config)
  File "/usr/local/lib/python3.7/site-packages/certbot/_internal/storage.py", line 465, in __init__
    self._check_symlinks()
  File "/usr/local/lib/python3.7/site-packages/certbot/_internal/storage.py", line 532, in _check_symlinks
    "expected {0} to be a symlink".format(link))
certbot.errors.CertStorageError: expected /data/letsencrypt/live/<my domain>/cert.pem to be a symlink
Renewal configuration file /data/letsencrypt/renewal/<my domain>.conf is broken. Skipping.

Any suggestions?

#

maybe letsencrypt changed something in their end which triggered the update, but I can't find anything about that in the change log so I'm mostly curious if I shoul just lean back or if I need to troubleshoot.

raven tinsel Feb 18, 2020, 6:36 PM

#

There is an issue open

#

it has been mentioned above already

#

it is a bug

neat lily Feb 18, 2020, 6:39 PM

#

the error in the old version as well? that one worked fine 2 days ago

raven tinsel Feb 18, 2020, 6:39 PM

#

you just answered your own question 😂 (in a single line)

neat lily Feb 18, 2020, 6:41 PM

#

ok. could find any info on the error in the old version, hence the question here. but ok. I'll just follow the issue I guess

subtle locust Feb 18, 2020, 6:43 PM

#

@raven tinsel you're right, building it myself would be easier.

broken zenith Feb 18, 2020, 6:51 PM

#

Should I install the official or the unofficial ssh server add-on? :O

#

The unofficial one sounds good but has a rating of 1 and no apparmor..?

#

Weird that it has different permissions to the official one though.

raven tinsel Feb 18, 2020, 7:02 PM

#

@broken zenith Is is more capable, has more access to hardware, hence a lower rating

#

in general the official one should be enough for most usecases

#

however if you like to scan for hardware like bluetooth, access docker directly, install custom packages or run custom services, the community version can provide those capabilities

low pulsar Feb 18, 2020, 7:03 PM

#

After a update (homeassistant or MariaDB?) i cant connect remotely to the DB anymore. Is this a common problem?

broken zenith Feb 18, 2020, 7:03 PM

#

Hmm okay. I'll stick to the community one for now then. No reason to overcomplicate. I just saw that it passed ssh-audit. Which is nice.

raven tinsel Feb 18, 2020, 7:03 PM

#

@low pulsar Yes, it indicated you are using an incorrect hostname in the Home Assistant configuration. Make sure your db_url in the recorder settings is using core-mariadb to connect to.

#

@broken zenith Yes, the community one is more strict on the SSH end, which IMHO is needed considering its capabilities

low pulsar Feb 18, 2020, 7:04 PM

#

Home Assistant is working correctly, when i want to connect from an other device with HeidiSQL i cant connect

broken zenith Feb 18, 2020, 7:08 PM

#

So for some reason pasting my ssh key makes the config correct yourself to...

authorized_keys:
   - >-
      ssh-rsa
      my-key-string==
password: ''

Is this correct, and does this also mean that password is disabled and not simply blank..?

#

Ignore me, I can simply test. Was on my phone, but just got to my laptop now 🤣

tawny obsidian Feb 18, 2020, 7:20 PM

#

I'm unsure if I'm in the correct chatroom,
Does anyone know if theres a way to generate a sensor for add-on updates for supervisor - add-on store?

obtuse crow Feb 18, 2020, 7:21 PM

#

@low pulsar see the thread up above this morning - it explains the whole thing as I had the same issue 🙂

cursive herald Feb 18, 2020, 7:58 PM

#

Hello, all. I've had to rebuild my installation, and just got to reinstalling the MQTT broker. It won't start, and it doesn't put anything in the logs that I can find. Any ideas as to why it won't start?

raven tinsel Feb 18, 2020, 8:01 PM

#

@cursive herald Check the supervisor logs (Supervisor panel -> System tab -> Logs)

cursive herald Feb 18, 2020, 8:02 PM

#

Thanks, @raven tinsel I always forget to look there. I think I see the issue.

raven tinsel Feb 18, 2020, 8:03 PM

#

👍 Glad you found it in that case

cursive herald Feb 18, 2020, 8:03 PM

#

Yep. Solved. Thanks again.

broken zenith Feb 18, 2020, 8:11 PM

#

Lets Encrypt fails on v4.6... ?

email: my-email@gmail.com
domains:
  - hass.my-domain.tld
certfile: fullchain.pem
keyfile: privkey.pem
challenge: http
dns: {}

[21:10:00] INFO: Selected http verification
/run.sh: line 88: DNS_PROVIDER: unbound variable

neat lily Feb 18, 2020, 8:13 PM

#

yep. https://github.com/home-assistant/hassio-addons/issues/1102

broken zenith Feb 18, 2020, 8:13 PM

#

Oh. Durh. Thanks 😄

wicked heron Feb 18, 2020, 9:18 PM

#

I am having trouble with samba and a virtualbox running HA... I can see the host computer on my network, but after starting samba it doesnt show up in my network. Do I have to disable the network on host machine?

sly kindle Feb 18, 2020, 10:05 PM

#

@wicked heron what are you connecting from? Windows?

wicked heron Feb 18, 2020, 11:02 PM

#

@sly kindle yes, from windows 10 machine,,

#

only network I can see the laptop, but I dont see the hassio folder from samba

#

on my network I mean

sly kindle Feb 18, 2020, 11:04 PM

#

you are entering the ip address in the file explorer address bar? windows 10 doesn't just "browse" the network anymore

#

📎 unknown.png

wicked heron Feb 18, 2020, 11:05 PM

#

no, I thought it would find it on its own like with pi...

sly kindle Feb 18, 2020, 11:05 PM

#

that whole "network neighborhood" thing is ded

wicked heron Feb 18, 2020, 11:06 PM

#

and I use my ip of the HA install?

#

worked like a charm,,, thank you..

#

do yo have any idea why I can see my HA when host machine is connected via wireless connnection but it doesnt when I connect direct via LAN??

sly kindle Feb 18, 2020, 11:34 PM

#

@wicked heron did you configure it to use wifi?

wicked heron Feb 18, 2020, 11:35 PM

#

@sly kindle I dont think so,, I set it up to bridge my connection,

#

so it should use the connection of the host machine?

sly kindle Feb 18, 2020, 11:36 PM

#

are you running on a pi? what OS?

wicked heron Feb 18, 2020, 11:37 PM

#

oh, it is windows 10 host machine running virualbox linux/ubuntu

#

HA works only when I have it connected via wireless?

obtuse crow Feb 19, 2020, 12:01 AM

#

@raven tinsel Thanks for the update to VSC

pulsar rain Feb 19, 2020, 1:20 AM

#

@raven tinsel regarding the Grafana add-on: do you see any way forward on feature request #18 (grafana-image-renderer) or is this still stuck due to issues on Grafana's side? In the meanwhile what would your recommendation be for creating a full size lovelace card based on a Grafana dashboard? I think using card-modder to change the css of an iframe card seems to have worked for some people....do you think that is that the best option at this time?

rough gazelle Feb 19, 2020, 3:27 AM

#

Hey #add-ons-archived, I would like to setup Let's encrypt to secure communication to/from home assistant. I see there are docs on how to leverage nginx as a verse proxy, however I have nginx running as a reverse proxy on a different machine. How do I leverage the same certificate on both the nginx machine and home assistant? Or can I generate two certificates for the same domain name?

teal lotus Feb 19, 2020, 5:12 AM

#

@rough gazelle why not just create another nginx server with a proxy_pass to your home assistant instance?

#

If your cert is a wildcard cert you could even set up a specific subdomain to go to home assistant

#

For example, I have my top-level domain going to home assistant with two subdomains going to other things. They're all separate servers in my nginx domain config that just proxy_pass to each service

weary stratus Feb 19, 2020, 11:14 AM

#

Hey #add-ons-archived I've updated the VScode addon this morning, but I'm still getting terrible memory-leak and high CPU-use. Anybody else experiencing this? I'm running 0.105.5, supervisor 201 on a i3 NUC. I've tried disbaling GIT, but that doen't make a difference.

raven tinsel Feb 19, 2020, 11:54 AM

#

@weary stratus I don't see a terrible memory leak. It is a heavy add-on, that is expected though.

#

It is normal for vscode to use 500-1000mb of memory (even more on bigger configurations).

weary stratus Feb 19, 2020, 12:09 PM

#

@raven tinsel Thanks for the reply, must be somthing specific to my config then. docker stats showed 5GB mem used and spikes to 350% cpu. It only starts spiking when I'm actually using the VScode frontend. Is there a way to limit resources for the VScode container. That way I can make sure Hass stays reachable

raven tinsel Feb 19, 2020, 12:10 PM

#

That sounds unwished for indeed, check the extension output of vscode to see if you can find hints. Any improvement is of course welcome.

#

There is currently no way to limit

#

the last release of the add-on did improve some things arounds search indexing and stuff

#

if you run the reset-settings in the terminal of vscode, it will load up the new defaults (restart the add-on after that)

#

Thinks like databases and stuff are now excluded, which helps a lot as well

weary stratus Feb 19, 2020, 12:13 PM

#

I'll try that thanks. With terminal of vscode do you mean actually opening terminal in the container like --> docker exec -it <container name> /bin/bash

raven tinsel Feb 19, 2020, 12:13 PM

#

no

#

menu -> new terminal

#

the terminal inside vscode itself

weary stratus Feb 19, 2020, 12:13 PM

#

Very good thanks!

#

Just booted up agian, cpu stays abetween 100%-150% and mem cycles between 500mb -- 1,2 gb

#

If I'm understanding you correctly that could be considered normal behaviour?

raven tinsel Feb 19, 2020, 12:26 PM

#

it will lower itself after indexing

#

but the mem looks normal, yes

#

mine hovers around 600-800mb with my production config, cpu is idle most of the time, however when using

#

it will eat a core when busy editting.

weary stratus Feb 19, 2020, 12:29 PM

#

Hmm, cpu keeps going above 100% even now. You mentioned: check the extension output

#

I'm guiessing you mean something else then just looking at the logs? How can I check te extension output?

raven tinsel Feb 19, 2020, 12:29 PM

#

if you open a terminal in vscode

#

it will also show a tab in the terminal window called "OUTPUT"

#

you can click that

#

and it will show you output of internal things

#

on the right side of the terminal window, there is a pull down box, allowing you to select the output of different things inside vscode (e.g., extension, extension host, etc)

weary stratus Feb 19, 2020, 12:33 PM

#

Seeing output for different things including some errors, but nothing continuesly throwing errors or something

#

Cpu is up to 200% and mem reaching 3gb.

#

I'm seeing this error for the Home assistant Language Server

#

Cannot find the files in folder config/config/config/config/config/config/config/config/config/config/config/config/config/config/config/config/config/config/config/config/config/config/config/config/config/config/.git/objects/bb

#

inside my config folder, the config folder is listed again and so on. Could that be causing the indexing to never stop?

raven tinsel Feb 19, 2020, 12:38 PM

#

Yes

#

you have a loop somewhere, maybe a symbolic link loop or files that include each other

#

Something in your config or file system is causing a cyclic loop

weary stratus Feb 19, 2020, 12:40 PM

#

Understood, thank you very much!! I'll start combing through my config to find it...

leaden crystal Feb 19, 2020, 12:47 PM

#

Anyone with experience with the Plejd addon?

#

It wants me to change its config.json but I don't know how

weary stratus Feb 19, 2020, 1:07 PM

#

@raven tinsel Found it! my config folder was symlinked inside my config folder 🤦. VScode addon is behaving very nicely now.

raven tinsel Feb 19, 2020, 1:07 PM

#

Nice!

#

Well, happy to hear that to be honest 😄

#

Enjoy the add-on 😄

weary stratus Feb 19, 2020, 1:09 PM

#

Thank you again, would not have found that myself.

raven tinsel Feb 19, 2020, 1:10 PM

#

no problem m8 🙂

leaden crystal Feb 19, 2020, 2:02 PM

#

Still need help. Anyone knows how to access an addons config.json?

teal lotus Feb 19, 2020, 2:09 PM

#

did you follow these steps (easy installation)? https://github.com/icanos/hassio-plejd#easy-installation @leaden crystal

#

if so, then you don't need to edit that file. otherwise config.json is here: https://github.com/icanos/hassio-plejd/tree/master/plejd

eager forge Feb 19, 2020, 2:43 PM

#

I noticed a couple of months ago that https://github.com/hassio-addons/addon-firefly-iii exists, and have been eagerly awaiting the moment it will show up in my HA's Addon Store screen. Anyone know when that might happen, or alternatively, how I can go about adding it to my HA instance manually?

teal lotus Feb 19, 2020, 2:49 PM

#

i believe you could just put the firefly-iii folder into your addons folder @eager forge

#

then refresh the addons page. i don't run HA or HA supervised anymore though so i'm not totally sure

leaden crystal Feb 19, 2020, 2:54 PM

#

Okey its working now even with that error

rough gazelle Feb 19, 2020, 2:54 PM

#

@teal lotus with the proxy_pass scenario to proxy requests from a separate NGINX server to home assist, I can definitely do that, but all of the internal connections between the proxy and home assistant would be unencrypted, which I'm trying to get away from. Likewise, via the mobile app, I would have to connect to the local home assist server via http, which I wanted to be secured (unless I do split brain DNS, which isn't favorable just for this one resource)

teal lotus Feb 19, 2020, 2:55 PM

#

ah understood.

rough gazelle Feb 19, 2020, 2:58 PM

#

Is there a way to do end-to-end encryption or does home assistant typically only leverage http internally?

raven tinsel Feb 19, 2020, 3:02 PM

#

@eager forge It is available in the edge repository, but there are changes upcoming and still in development, so I would not recommend on using it just now.

#

@rough gazelle When using the reverse proxy add-ons, traffic is on the internal network of home assistant itself

#

and does not leave the device

teal lotus Feb 19, 2020, 3:14 PM

#

@raven tinsel here's what moo originally said: https://discordapp.com/channels/330944238910963714/672220642099200000/679529387619778625
i suggested proxy_pass from his existing nginx server as an alternative.

leaden crystal Feb 19, 2020, 3:18 PM

#

Hmm somethings not right

#

I could add my Plejd dimmers and entities were created in HA but I cannot see status or control them from HA

rough gazelle Feb 19, 2020, 3:27 PM

#

@teal lotus @raven tinsel not sure I am following the suggestion. The goal is for end-to-end encryption between internet -> NGINX Proxy -> home assistant. I understand how to get NGINX to forward requests to home assistant via HTTP, but I'm not sure how I can use Let's Encrypt to provide encryption on both the proxy and home assistant machine itself.

teal lotus Feb 19, 2020, 3:28 PM

#

if you set up a base_url for home assistant with an SSL cert i believe the local traffic will still be encrypted despite giving you an invalid cert warning

rough gazelle Feb 19, 2020, 3:30 PM

#

@teal lotus so in this case, maybe it's just best to do a self-signed cert on home-assistant and allow the proxy to forward to that, disregarding the self-signed error?

teal lotus Feb 19, 2020, 3:34 PM

#

yeah that should work

raven tinsel Feb 19, 2020, 3:34 PM

#

@rough gazelle You can't do end-2-end with a simple HTTP proxy

teal lotus Feb 19, 2020, 3:35 PM

#

oh maybe not lol

raven tinsel Feb 19, 2020, 3:35 PM

#

since the proxy itself will always be able to decrypt the traffic

rough gazelle Feb 19, 2020, 3:37 PM

#

Yes, but when the proxy initiates the connection to home assistant, that could be encrypted, unless home assistant doesn't support a certificate directly on that service. That's the piece that's confusing is how exactly home assistant handles certificates (in this case was planning on using let's encrypt, but that may not be possible with the reverse proxy in front of it)

raven tinsel Feb 19, 2020, 3:38 PM

#

I'm not sure why you would do that

#

if you use an reverse proxy add-on