#the-water-cooler
1 messages ยท Page 354 of 1
Going by the first 2TB drive I found. BBB2 is more expensive after 5 months for me
If you've got another online destination, go for it
i could sneak it into my works s3
I mean if I'm making a lot of terabytes. 5 bucks a month per TB might be cheap
I dunno
I'm not really doing any large data quantity projects
I mostly fill up my hDD with the vidiya
For that, very few places are cheap
There are/were also places that did $5/month/unlimited
I remember those linus nerds literally just built an insane petabyte server rack.
so they could edit their RAW RED camera footage in the office.
Why they spent 100K+ on a camera. I still have no idea
here I am in 2019 watching on a 1080p screen with 150% scaling
We sell 30PB storage systems with no spof ๐คท
That is just the traditional block storage though
I think we can implement object storage with close to 100pb
@wet raptor more
heavy weapons guy voice "Four hundred thousand dollars."
Depending on discount, I would say a minimal version is somewhere in the ballpark of 400000 usd
๐คฃ
put me down for one. i'm good for it.
Imagine how many years of CCTV footage you could save on that
for realsies.
"Here's the time back in '19 that I forgot my keys and had to smash a window in.
Don't want the full system ? I think I can get you 30tb for 5mill usd
30pb?
Oh yes,pb ๐
my buddy is the video editor/archiver at NASA
they have some huge system.
its PBs but i forget the numbers.
I installed a 10 node object storage system a few months ago, 2.2pb, can lose 5 nodes and still retain data
Jesus
@valid halo what is it my child?
XD
impressive
Kinda ha related, I laughed too hard at this
Levitating Bird - https://gfycat.com/SnivelingEnchantingDunnart
Today I told my mom "I'm going to charge my phone in here (the TV Room) It will shout when it's charged. Don't be afraid."
Update on floor plan making
it's shockingly easy
Phone AR tech is amazing.
I might have my ground floor done by the end of the week
Then I can do cool shit in HA and do a Wifi Heatmap
You're doing an augmented reality floorplan for HA?
Yeah
Neat
I saw Dr ZZZs video on it
I didn't know he did a video on that
Yeah he did a vid about it
he talks over a few options. but for me an AR planner is the most efficent
I know it can be off with measurements but as long as it has the general shapes and such right
it should be fine
You got a link to the video?
The map of my "basement" was drawn by RobA. He does amazing Fantasy maps. You can check out his work here - http://www.cartocopia.com/ www.DrZzs.com - Blog p...
If you want to pro up. You can buy a 18 dollar laser measuring tool and get your wall measurements that way. so you can have an exact size representation.
I'm literally almost done with my floor plan
I just need to do my mom's room, her bathroom, the laundry room, and the guest bathroom
Maybe the garage too?
sweet!
Aaaahh ๐
unsupported cpu 0x06 model 0x25 with a Macbook
sad story
N-nani?
vSphere ESXi from VM ware - A hypervisor - Would have loved to try this out.
still could maybe go for centOS and then VMware or something to run it in cent - But this thing only having 4gig of ram
I wont share the ram out of my main Mac ๐
and also dont like to invest in extra ram - mostly waste of mony I guess
My roborock wants to intercourse with everything in my living room,then gets stuck
@hearty depot 4gb, that's whats in my Chromebook, my work laptop is 48gb and my primary server is 192gb and my secondary is 128gb ๐
Does anyone have a favorite ONVIF camera viewer Android app that supports two way audio?
I've used onvifer for testing my cameras, but none of them have audio, use it to calibrate my cameras when I install new ones
Do you not view your cameras remotely?
Yes, but I do that via zoneminder or ha
so i have noticed that HA does not seem to delete my mqtt devices that i no longer have powered on, even though i delete them from the registry and re do the interrogation. any reason why these devices keep showing up even though they are not connected in anyway to my network
@clear ferry my Neato is ok about not trying to hump any low furniture, but has no problem backing itself up a wall and getting stuck.
@clear mirage this is really a #330944238910963714 question, but if there are retained messages in your mqtt broker in HA discoverable topics, they will still show up in HA if you use discovery
๐
@unreal orbit ah ok, ill head over there then but thanks. just trying to clean up my entity registry.
@clear ferry ๐คค Later maybe - Its just a gifted old macbook would have hoped that I can play a little with bit more advanced setups and learn my stuff.
Installing a small 500 server cluster tomorrow, hope it works ๐
TIL vacuum cleaner skins is a thing.
@low harness black was too boring ๐คฐ
I don't really even see my vacuum. She only comes out when no one is home
@unreal orbit love that you have assigned it a gender ๐
my neato's name is Wade..
We get mail at our house addressed to a previous resident that has a name that's straight out of Harry Potter. We have now given that identity to our vacuum. So our vacuum gets mail sometimes
lol, that's the best..
Mine is Akino, one of Kakashis dogs from Naruto
My son named mine Wade after the gas station attendant on Kick Buttowski cartoon.. ๐
Is that a cousin of Mike Wasowski?
nah, he's a suburban daredevil, not a torso-deprived eyeball. ๐
Ahhhh fufufu - how hard can it be to get an vnc/rdp server running on ubuntu ๐คฆ
VNC should be ... oh, hang on... a PITA
Last time I tried was a few years ago, and the instructions at the time were vague and unhelpful
I had VNC working at one point, but it was incredibly laggy and basically unusable
Im gonna be home soon. Them im gonna axe yall a question.
As long as you don't knife us ๐
Worked well on windows - But now on linux I have my serius issues - The instrucktions are still vague
I`m at the point of fuck it
I just gave up and did what I needed to do through ssh. Anything I could do graphically on ubuntu I could do on whatever PC I was remoting in with ๐คท
moving files is still more convinient with a mouse
Disagree, but to each their own. Once you get used to console commands it can be just as fast if not faster than GUI
minus the time it takes to google the correct command and arguments ๐
I remember using vnc a lot in 1998/9, but... That was the last time also ๐
@hearty depot I hate dragging files, I always drop them the wrong place, long live console
I'm a weirdo since I prefer working on serial ports instead of web guis according to my colleagues though ๐คท
Pebkac ๐
I am looking for a program to intercept and parse network traffic and then send the results to another IP. My Printer sends out SOAP calls for when a print job is done or it's empty of paper. So I want to intercept those and have Alexa say "Your printing is done. " or "Need more paper" so far google hasn't been much help.
So I need that info sent to Node-Red or HA to trigger the automation
What printer? Looked into if you could rather query the printer directly via rest /JSON / something?
It's a Canon Pixma
I spent some of hte morning attempting to imitate a WSDAPI call to it
Looking over the "Baseline " and "My Packet" in Wireshark
they look almost the same
but the printer doesnt' give me an HTTP response
I just get a 404 or 403
https://pastebin.com/hQ0ah20k here is what it sends to the printer. This asks for information about the printer.
Line 11 is the start of the printer's response
@hearty depot FWIW, I got VNC working on Ubuntu only with xfce4 as the DE
Yea - Thats maybe my issue - Have here unity installed - Maybe I ll try yout my backup script and reset up with xfce
If anyone gets any suggestions. Lemme know.
Man google really locks down what you can use as an invocation for a custom action. Everything I try seems to break some arbitrary rule they've set
@unreal orbit yea i hate that....the last time they enabled a new feature was to bring more voice commands to the nvidia shield....as a result i had to stop using a script and use a switch instead....literally took over my own device name that was working....it was annoying and i expect them to do it again the next time they decide to reserve a keyword
I gave up. I thought it would be cool to be able to communicate with HA by voice from my phone, but not at the cost of coming up with a ridiculous invocation that I'll never remember
I'm looking at enabling the pihole addon for my elderly grandparents, in the hope that it will block access to "MSFT" spammers. Is there a reason it has such a low security score?
Or suggestions for alternatives that would dissuade them from granting remote access to said individuals
Yo, wyzecam finally dropped it's RTSP firmware
I peronsally own 4, and as seeing how the HA community loves cheap smart devices (and expensive ones, - but i'm looking at you xiaomi) and seeing as these are $25 a pop, thought it was worth a mention
and maybe a component now
Cool.
I remember I flitered with Cameras
but to get GUD ones I'd have to drill holes in my house
I'm living with my mom so that would be no bueno
Right now our only camera is a Ring and honestly that was an awful purchse IMO
Do ya'll use spotify or google play music in conjunction with your home automation?
not currently
You don't use either?
gotcha. I'm debating between GPM and spotify currently.
what animations are you going to do?
spotify kind of sucks for automations, because it forgets the source constantly.
like if it goes into an idle state for an hour or maybe even less, it'll forget what device it was last playing on and then when you attempt to play anything it says 404 source device not found or something. it only seems to remember alexa devices
Ahh, thats good to know. I use google home.
yeah google play music would probably be a better choice in your case then. Although i don't have any experience with GPM to know if there's any drawbacks with that.
@mild cloak the major issue I run into is that all the good playlists around are all spotify.
Also, some music I like is on Spotify and not GPM for whatever reason, like Rammstein
I heard that with Spotify I can have a song playing on my phone in the car and then move into the apt and "Send" the song to my google home and it will keep playing seamlessly.
Yeah I use Spotify myself, I prefer the UI and feature set and there's apps pretty much every device. But it just sorta sucks for automations in my experience due to it constantly forgetting the device/source list.
What you described works very well when using their official mobile app. But not so much anywhere else (third party apps / services / HA).
Here's an example of what i mean by it forgetting the source list, an error i just got inside HA with Spotify.. Failed to call service media_player/media_play_pause. http status: 404, code:-1 - https://api.spotify.com/v1/me/player/play: Player command failed: No active device found
Has anybody else that you know experienced the same issue?
it's been an issue since forever, seems like more of a spotify quirk than anything else
Anyone here using Fully Kiosk Browser on an Amazon Fire HD8? I can't seem to get the screensaver URL to work and was hoping someone could share their config
When it is an 2018 model you can root the tablet @near palm
@hearty depot - is there a way to determine if it's the 2018 model (I purchased them around March 2019 - so they should be 2018 models)?
Did some reading on this and it appears I do have the 2018 model - I'll look into it to see if it's worth rooting it
Frack i hate landing in Trondheim, sidewinds from hell
Norway - You maybe take an picture from your 500 server instalation?
Maybe I will, I'll have to do some documentation anyway ๐
This is on the smaller side though, rolled in a 800 and a 1200 a few years ago, but those are outdated by now ๐ค
But this has GPUs in every node though, which is nice
who is ready for some new merch
T-shirts with your face on it? Sign me up for 32!
@hearty depot if you want to read about some of the older ones https://www.sigma2.no/content/hpc-hardware-resources
Holy
Why the heck are the instructions to use ADB in docker in a README of a library HA uses? Just write it somewhere where people can find it without looking at the source
what if i told you you can do that yourself
@hearty depot 4 servers in each of these 2u boxes, and a multiple of racks
And some storage nodes on the side
arr - freshly unpacked ๐คค Have fun
I guess everybody here is using a secrets.yaml... I'm a bit concerned about security since my venv setup is not encrypted at all and everybody with physical access to the harddrive could read all my credentials. How do you guys solve this problem? I know the 'keyring' feature but this isn't best practice for "heavy restarters"...
maybe a devmapper loop with a symlink to the secrets.yaml
you don't make the files readable by everyone, only the homeassistant user
that would add an extra layer security and only the need once per reboot to unlock the file
yeah sure but every who mounts the harddrive somewhere else could read the data
what? how?
put the sdcard in any other comnputer and mount the partition?
thats not a harddrive
sdcard/harddrive/image whatever you want
lock the rpi in a safe
if someone stole your sdcard you have bigger problems anyway
well and in that case it would be better not to give them access to my mail account and anything else
beside the big problem so broke into my flat ๐
also i'm not sure your average burglar is going for the rpi sdcards
average burglar probably won't understand how to mount an ext4 filesystem
unless they mount it on the mac they stole in the same robbery
some average home assistant users can't
I'm pretty sure the average doesn't know about sshkeys but I prefer to store them in a safe place too ๐
i have a feeling you're preparing for the zombie apocalypse while being unprepared for a flood
Or a burst pipe ๐
Yeah read this @clever mortar
The thing is, anything other than enter key to unlock is at best handwavium
You could do that for your whole OS though...
stick it on an encrypted partition
Yeah that would be the best but not really practical for a headless device
You could put the key on a USB stick, so that it reads the key from the stick. Of course, that's watering down the security you're aiming for
There are other ways around it too, but you either have security, or security theatre
Maybe a crypt loop just for the secrets is a good thing between full system crypt and no encryption at all
But than I need to type in the password everytime I restart hass
I'll test a loop device, what do u guys think, worth a post on the forums?
๐คท Sure
or move the whole venv to a cryptoloop?
I don't want to rain on your parade, but if someone gets physical access to your hardware you're hosed in any way
@clear ferry How youre doing with your servers?
That what I was looking for ๐คฃ
Pandering to /r/cablegore?
Not too bad here, only 200ish cables, the previous I did was roughly 1400 cables
@unreal orbit velcro my friend
Proper cable management is the most important part of a server setup IMO
I feel personally attacked
@light trout yeah, I spent 4 days on the previous one, but there I had to label them all myself
These come prelabeled
I usually start cable managing with good intentions, but something goes wrong somewhere along the way and I end up half-assing it
Improper cable management is the hallmark of most racks I've seen ๐
That is the part I miss the most about onsite work, planing and doing cable runs are quite fulfilling. ๐
If I had a proper rack I would put more effort into it. My networking setup is contained to my entertainment center, which changes too often to properly manage
@light trout and in big projects, it's a lot of overtime and $$$$$ ๐
That helps ๐คฃ
I've been in a server room where I had to step over, and under, cables stretched between racks... nothing would surprise me
And, let's not mention the running water...
It's to keep the vampires out of the server room
@thorny trench lol, the camera up there..."Don't you touch my stuff! I LIKE it this way!"
That's one of my office closets... Guys ran that green cable for me to find and make me get all worked up.
That looks like somebody actually cares...
Thank God for factory cabling, I just have to do the runs between the racks
Ready to be pulled, one of 14 bundles
@clear ferry Assuming the people at the factory actually cable the way you want. Then thank any Diety you wish for LLDP and some scripts to verify all good when the rack is powered up...
When I worked in an Enterprise DC we did wiring like that. So much time
@strange vapor yeah, I got 27 racks once that were cabled from top to bottom when they were supposed to be from bottom to top... That took a few days, velcro porn
Worst I've seen was a screw up that meant some servers in the rack had all ports plugged into a single switch.
And no labeling? ๐ ๐ ๐ ๐
Oh the labelling was correct, it just didn't match reality!
Better catch my flight back to Oslo, let the other guys do cabling the rest of the evening ๐
We have a PXE images which runs on first boot, and reports back on hardware and cabling. So LLDP info is reported as well.
It threw a massive red flag on all ports being hooked up to the same switch.
Yeah, lldp saves me often, especially on the one 25000 switch port network I installed....
I may have to play with that and see if it works with any of my "smart" switches at home ๐ค
If a switch has smart in the name I usually stay away ๐
Haha
It's POE powered, so it does what I needed
Or wifi that says "high power" on the box
High power WiFi is great for reaching a distance. Shame that the devices can rarely reach back ๐คท
Did try to run a single AP AC LR in the house of my in laws - Didnt got throu the floor =/
But at least I have wifi on the toilet
@clever mortar I've seen it work on some of the mid range Linksys switches.
Google suggests it may work on the Zyxel
I mean, I don't need it, my house isn't big enough I'll lose anything. However, it's always good to learn something new ๐
@clever mortar For any non-trivial networks it's essential, but better to learn the basics on a non-trivial network!
Hopefully I never again have to be responsible for any non-trivial network ๐
On the other hand, the odds my having to help somebody with a non trivial network... that's pretty damn high
Before we sorted the scripts I mentioned above, I remember sitting next to one of the network engineers here. I had to go in over iDrac/iLo to servers and kick them so she could see what ports on switches were going up and down. I don't recommend this as a good debugging method ๐ฆ
Ah, old school
The LLDP solution was created out of self defense, and it has paid for itself over and over again in time saved due to finding this crap before we even go near servers.
@strange vapor I have seen some smart patch panels that work with lldp CDP, that is nice, you can see the other end on a LCD on the patch panel, and it just passes it through to the switch
Can't remember the manufacturer though
I remember a company trying to sell us some special Cat-6 with a light pipe and special RJ45 connectors. The idea was that you could put a special light source on one end of the cable, go to the far end and see which RJ45 was glowing. Nice idea, but stupidly expensive.
Something like https://www.cableorganizer.com/mertek/evo6-patch-cord/ but I don't think that was the company.
Wow, that sounds like cable beeping just with extra steps
Ha, one of my colleagues didn't get very happy when I said my next free calendar day was June 4th ๐
Sure, I'll help you, just wait five weeks
@strange vapor Like this?
https://www.reichelt.de/cat-6a-mmc-led-patchkabel-grau-2m-s-ftp-pk-c6a-2-gr-led-p101089.html?GROUPID=7215&&r=1
https://www.reichelt.de/mmc-led-patchkabel-detektor-mmc-led-detektor-p101093.html?GROUPID=7215&&r=1
MMC LED Patchkabel Cat.6a S/FTP, 2,0m, grauโข Mit leuchtenden RJ45 Steckern zur Nachverfolgung des Leitungswegesโข 10 GBit Ethernetโข Konzipiert fรผr den Einsatz im Bรผro, Industrie und Rechenzentre [...]
They're the ones!
People who travel by plane who only travel in a one-piece ๐ค ๐ค ๐ค ๐ค
To Thailand I have even seen it...
@quasi spear Why?
@clear ferry You mean with just a carry-on?
@clever mortar no... The body suit...
I've seen them with crocs too for like 10 hour flights... Jewsus
I also hate people who fly with the whole fricking life in the carry on, and have to unpack the eighteen layers of plastic bagged fluids and their three ipads from the bag, and still they beep because they are wearing shoes with metal insoles or something...
Spot the professional traveler ๐
if you are unable to move quickly at the airport, send your luggage instead...
I don't have that many travel days though, just probably 30-40 by flight per year :p
Is that 30 to 40 days where there's a flight, or 30 to 40 days away?
not as my friend who did 200-250 a year, but he cut back to 50 a year in exchange for a 50.000โฌ decrease in salary, he was tired of having platinum in all flight lounges ๐คฃ
๐คฃ
30-40 flights, so 15-20 round trips for me mostly
Yeah, that's enough to put you into the "I do this for a living" group IMO ๐
You travel enough to know what not to do
Doesn't feel like it when I talk to people who work with oil and gas ๐คฃ
Oh yeah. I've a few colleagues with Gold status
so far this year I've only had 40 hours overtime, need to do something about that, usually I pass 200 by now ๐คฃ
Overtime... ๐ค
I work more hours than the contract, don't get paid for it though ๐คท
that needs renegotiation!
I do hours from the moment I lock the door and leave the house till I get back home
so today I left 05.00 and will get back by 21:00, so 3 + 5 hours overtime, plus regular 8 hours ๐คท
It's the nature of the UK employment, but... I refuse to do silly hours, and the extra I work is because I feel like it
eeh, 8 hours overtime
Sheesh
I'm on target for maybe that this month ๐
Then again, maybe if they paid me for it, I'd think about it...
Nope, thought about it, still wouldn't ๐
haha
I had 750 hours one year
but that was extraordinary, as I had double on duty, and was managing a lot of a whole hospital project by myself ๐คท
Yeah, I've done that kind of thing before, when I was getting paid for it
"oh your emergency phones are down? sorry, it's past 16:00" tap watch
doesn't work like that with lives on the line :p
remember I came back one day from working 28 hours because the hospital SQLs were down, I slept for a day afterwards
mostly anything I touch is either : a. highly critical (health) b. highly expensive (oil and gas) c. very secret (military or goverment) or a multiple of the above ๐คท
Now I just need the UK to leave the EU so building prices plummet and I can get that cottage in Somerset ๐
but.... I want cider and meat, and cold and wet I've had all my life ๐
Cider โ
Meat โ
Yeah, but we've got whisky
That's right, when will I ever have time to get through my stock of Lagavulin and Laphroaig ๐ค
can get the wife to use it in cakes I guess ๐คฃ
Sheesh, you need to get over here and visit the places that sell a range of stuff
If you've got less than a few dozen, you're not trying hard enough ๐
(and, sssh, try the Japanese ones - they're really rather good)
I have 8 bottles of whisky and 10 bottles of rum I need to kill, but when have I ever time ๐คท
I have two japanese ones
they are nice
With travel and overtime like yours, "holiday"?
Well.... I transferred 25 holiday days from last year to this
so I have 50 days this year ๐คท
๐คฃ
and I won't get to use those since I have paternity leave 50% this year anyway :D
That's unhealthy
(not that I've done that myself, you understand, and ended up being paid for them because I did it again)
I am quite unhealthy, better send @light trout to make me a healthy python man
Hello, HR, why yes I have over 100 days of holiday to take at the end of the holiday year
haha
well, that'll almost happen next year
I'll have close to 75
the backdraw with the overtime is that you get compensation time for it too. so last year I didn't do much holidays because I had 200 compensation hours to get rid of ๐คท
so that was all of november and most of december ๐คฃ
Sounds like your lot need to recruit somebody you can train up ๐
yeah... tell me about it
Been the SPOF (Single Point of Failure) before, it becomes seriously un-fun
with 13 products and rising that only I work with, I'm busy ๐
Ah, the joys of being the expert
At least I'm expected to train folks up so that I'm not a SPOF
But then again, why train someone on products that arent produced anymore, or that we sell three of a year, but when they break are so business critical a guy from the US calls me and wants status updates ๐ฏ
but I need to get someone to offload me on vmware and networking for sure, those are in high demand anyway
Ah yes, the typical short sighted management view
we'll see what happens when I join the WW-team later this year, then I'll have even less time for local stuff, hopefully something will happen ๐ค
That's why my local big box was using POS software from 2004
who cares if it's slow as shit and crashes a few times a day
We've paid it off
A totally magnificent album, but the title track is valid still today https://open.spotify.com/track/58zqOyrpXZQNwjkRtjGXqG?si=5ExIh2c2RAybvlu-OfpCgg
They checked out all the data on their list, and then the alien anthropologist, admitted they were still perplexed,but on eliminating every other reason for our sad demise, they logged the only explanation left... This species has amused itself to death
Wonder when I'm gonna find time to record that cover album I've thought about recording for 12 years ๐ค ๐ค
Do any of you use GNU Privacy Guard (GPG) subkeys for SSH instead of SSH keys?
@wary jolt why
did my Philips hue hub start crying when I blocked DNS over TLS and most DNS over HTTP providers and forced every one to use my dns? o,o I hate IoT
Just curiosity, I was reading about it today while researching about safe ways to back up SSH private keys.
I was called daft a few days ago because I keep my SSH keys is one machine only. I make back ups of pretty much everything else I consider important, but silly me doesn't backup SSH private keys.
I backup ssh keys and have them passworded
Looking of building a smart wall display - what's anyone using? Magic Mirror looks interesting, but the community looks pretty tired.. The only reason I don't use an HA page is I want a google calendar integration...
Must have's -
Weather today
Weather forecast
Calendar "upcoming" - say the next 5 items
Calendar view - the week ahead
Also ideally todoist option so I can show the shopping list on it
Lol - just wanted to say that lovelace could do this
- all other than the Google calendar displays, unless I'm mistaken? That's kind of fundamental for me unfortunately - that's really the sole purpose, the other stuff is just dressing around the edge
That's a possible one, I ideally want a more traditional 7 day calendar view
The google pre-generated calendar iframe is ideal if I can get it to load!
Would guess that your device have to be autorised
thought that might be the case - can get access to just a single calendar - but when I use the "Google Embeddable Calendar Helper" to get more than one calendar on one sheet it goes wrong
Anybody up for some voice chat soon?
Would love to chat about random ha stuff with some people
Let me go put my skin on. Then im up for it
I..err... Ok. ๐ค
@valid halo I'm in
oh dear
I know, I was looking at those this morning..
That's a honking heatsink
@brisk glen saw that on reddit... Ehhhhhh, certainly interesting. Think I might just upgrade to a NUC when a RPi no longer is powerful enough tho
Same here
, wanting to get HA and looking to get hue bulbs too
What do I need?
Raspberry pi
Bulbs
Bridge?
Is that all??
that's basicly it when you want to start out with HA and lights
Hey gang. Is the Aeotec Z-stick what people usually go with
I'm finally buying in
and getting myself a Pi and a Z stick
That's what I'm using. I only have one Z-Wave device, but I have had 0 issues after the initial setup
Well I didn't really have a choice. Finding a door lock that's not Z-Wave is very difficult/limited
I see.
I've always loved the concept though
Smart Locks I'm not sure about these days
Not clogging 2.4ghz that is
Are you worried about the security of the locks?
I wouldn't say so. I mean we've got big ass windows someone can smash if they want in our house. A lock is only gonna do so much. I guess I just don't like the idea of debugging my locks
Oh haha yeah those are my feelings on security as well.
I gotta worry about the MA Factor (Mother Approval)
"Why the hell can't I get in our house?" "You gotta use the app Mom." "AN APP? I got an app for you. It's called a KEY!"
At first my wife was like "but people can hack it!" And I explained that lock picking is easier than hacking, and kicking the door in is even easier
does anyone know what could be causing this to happen? my apologies if this is the wrong channel, didn't get an answer in support
right? lol
botched backup procedure?
The lock picking lawyer has dulled my faith in locks
the only thing I do for backups is take a snapshot, is that the wrong way?
It really is an art though. He makes it look easier than it really is
It's easy, but not that easy
I'll just get a Z-Wave Plus ED-209 door guard
@devout kiln snapshots are a valid backup method, but it's safest to use several backup methods
"Please press your NFC tag against my smooth tummy . You have twenty seconds to comply"
I have never seen the issue you are currently having though, I would ask in #330990055533576204 for advice
(I am assuming it's hassio)
it is, yeah
thanks for your help!
wanted to get this sorted before I run out of space
Do you know what's triggering it? Like on reset or is it multiplying exponentially every second?
I'm not sure, only just discovered this a couple minutes ago while looking at stuff in IDE
seems to be doing it for every folder in the main directory, makes me think it has something to do with restarts but i'm pretty new to this stuff
i'll fiddle with it more and ask around in the hassio channel
You should order the NUC now, so when your pi gets here and you're disappointed you'll already have a backup plan in the works ๐
Haha any will work. Even the i3 is more than enough for HA
Hell I run my server on a Pentium
Yeah that's the only problem imo
It's gotta be its own device, or at least on a dedicated server
Workstation workflow is too erratic to serve things off of
Yeah. So now a Raspi is gonna sit tucked away in my living room
that's the approx center of my house
There's an article about setting log files to write into RAM instead of disk on raspi, to extend the life of your system
I recommend looking it up, I remember seeing it linked on HackADay
Huh
Okay.
yay got another yeelight
one more room to go and my entire house is smart
well for lighting that is
YeeeEEET
technically i already have a smart plug in my bedroom but thats only for a nightlight
I think I'm gonna buy light switch covers. Mom keeps turning off the switches instead of shouting at lexa
aqara sells wireless light switches, that's what I use instead of the actual switches
Homeseer zwave light switches are great too
My only option for light switches is Luton IIRC
I need to check all my switches one day
I got three of these
What's a that?
basically cheap buttons
I use one to WOL my desktop because I hid it away under my desk
let me check my previous shitty pictures
Yeah looks like I don't have a neutral in my PC room.
What do y'all think
I would never get rid of a light switch without a physical alternative. Like a wireless button
put button next to switch. Simply retrain everyone to move hand a bit to the right or left?
Tie the switch wires together and put a blank plate over the hole
That's what we had to do with one of our rooms
Wall Switch(No neutral)
they also have a wall version
you could probably replace the existing switch with something like this, keeps power on the socket
That would be important. I have stuff plugged into the socket.
I've got my WeMo (TM) Smart Plug plugged in there
i mean the light socket
Ooooh.
@unreal orbit , do you use google with your nest thermostats?
Yes sir
Only alexa
Speaking of Nest. The Neest Doorbell looks dope
my ring looks like chump change in comparison
then again it did only cost me a benjamin
I sold my ring and got a nest. Ring sucks
Every fucking time a car drives by the damn thing goes off
It doesn't go off if you walk upto it
Two thermostats show up in google assistant. One blue and one red.
Donโt know if I need them both
Probably one for heat and one for cool? Not sure why it would split it like that
Every time I tell google to do something with the thermostats, he says, ok....blah blah to,two thermostats
Thatโs what I thought
Are you exposing it through Nest or through HA?
Both I think?
That might be causing issues
Permissions in nest......exposing in HA
I'd just use the nest-google home skill (or whatever they call it)
It's already cloud based, no benefit running it through HA
Yea, but google is my voice activation and ha is my UI....No biggie, I will figure it out in time For now, first world problems ๐
๐คทโโ๏ธ
Google home is the devil
Hey Google. Play a lullaby
OKAY. PLAYING A LULLABUY!!!
It's like that kid in highschool who never understood volume context
Need to pull my finger out and order some xiaomi buttons
Most of the time using GH when I look for my phone
Would realy like one wire smart switches too
the aquara ones would be nice - but they dont fit in austria
I love the Google mini in my office, I just use it for checking stuff online, asking it about my calendar, playing radio and greeting me in the morning, I just wish I could use it for Skype for business conference calls ๐
I just hope the Google hub comes to Norway soon, so I can have it in the kitchen, if not I just have to fly to UK and get one ๐
you can use it for that @clear ferry ๐
@light trout really? I couldn't figure it out last time I tried
Couldn't even get it to be a Bluetooth handsfree for my phone
Download the SfB app to your phone, pair your phone with the unit, make call
I do that all the time
The sound is terrible for the reciever, but that is not my problem ๐
it can
Sounds like they drowned the phone in the toilet and call from inside a mountain while eating Pringles
I just say "message me on Skype, I don't have phone coverage" ๐
jewsus christ I hate all these companies that employ chat bots
I have not ever encountered one that can actually help me with my problem
Hi there! How can I help you today?
Sorry I don't have the answer for that right now.
Can you try asking that differently.
Need to upgrade the memory soon
@hushed basalt exactly!
hmmm, I have created a vm called ludeeus, running esxi, I remember I was supposed to try something, but I don't remember what ๐คฃ
All our esxi support staff are currently busy
Would you like to receive a callback
Estimated time is {99999 hours}
"Esimated waiting time is NaN hours"
Makes me think of the opening of Portal 2
You have been asleep for 9.9.9.9.9.9.9.9.9.9.9.9.9 hours
Nein nein nein nein

You have been on hold for NEGATIVE TWO BILLION HOURS. Thank you for your patience
NOK 621.83 54%OFF | Mini PC Celeron J1900 Quad Core Windows 10 Dual LAN 2*COM Fanless Mini Computer Celeron J1800 N2810 NetTop 300M WIFI HDMI VGA
https://s.click.aliexpress.com/e/JxU5MiG this one with j1900 and 60gb and 4gb is what I got
Smarter Shopping, Better Living! Aliexpress.com
Oh thats wicked would save some power too
I've run my routers on desktops for 15 years, and in esxi for the last 6years, now this
intel nic right not realtek?
Run it on Compute Stick https://www.intel.com/content/www/us/en/products/boards-kits/compute-stick.html
Realtek aren't as bad as they used to be.
Of course, I still wouldn't have one in anything I use... because not as bad is still less than mediocre
I always found realtek just worked.
just pita experience with them when it comes to server stuff
I have a compute stick, it's a bit of a pig to get workin
for desktops and stuff i couldnt care less
(tho that's prolly cos I have gentoo)
Realtek, but I don't mind
I don't have any issues with the chip that's in this atleast
well if you say it works then im interested
I figure for home use, 800 megabits out of a gigabit nic is good enough ๐
I actually hate intel nics
But that is because their enterprise ones behave like shite ๐
I wish wireless was better (he says as he waits for 1.1 gig of kicad to transfer to his laptop)
@steel tartan was out troubleshooting for a video company the other day, they stream raw 4k stuff to edit, each file was 120-400gb, I installed a 2.2pb storage box there last year, it's full now ๐
I've had no issues with any Intel (or Broadcom) NIC, from sub Gb to 10 Gb ๐คท
100 Mb and below has been mostly ok with Realtek
The 10g intel nics with sfps are really sensitive to the transceiver,if it doesn't like it the NIC just vanishes from the os, and you have to reboot to get it back ๐ which is pita for uptime
Especially with the twinax active cables with transceivers
system looks good though, like fanless for a router
I prefer emulex chips or mellanox in the enterprise segment,never lets me down when I am in control of firmware and drivers
even more of a pita when you have 6 of them in a file server and it takes out the lacp cos one went away for god only knows why
Buy 100g cards, problem solved ๐
i see a few without wifi i have unifi aps
I used to run hp msm466 but I swapped them out for Linksys velop last year
I have one meraki, one netgear, one belkin, one dlink
I really should do something about that
tho, all the security cameras and most of the automation use the dumb aps, and the computers use the meraki (so long as they don't get distracted)
I'll probably get a few Aruba's in later this year to add to my lab setup ๐ค
Baby proofing the AV stuff, complete๐
Oh shit what happened there, usually when i take a picture with discord it is 400KB, this was way too big ๐
I might just have to house proof the baby, doing it the other way round is just going to be too big a job
You think those minicomputers are decent for ha too? been wanting to get HA off my unraid nas
@shut raptor compared to a pi, oh yes, and some people run a lot of stuff on a pi ๐
Hey, I resemble that remark ๐
You are a freak๐
And proud of it ๐
How many other home users used DAT tape stackers for their home backup solution I wonder...
I've used lto2, I'm too hip for that dat ๐
DAT was nice, because you could fit a 6 tape changer into a full height bay
I remember seeing a MOD changer once at a customer site and going wtf...
It was a floor model, think it has like 300 MODs
Those things are bonkers
I've seen the big units that you can stand inside (when it's not working, obviously)
I saw a lto library you could walk inside once, think it held 70.000 tapes and had three robots, if memory serves right it was a SUN library
Was like 14 meters long
Or maybe more
Sun was cool, just like DEC and SGI, oracle on the other hand, bunch of twats ๐
๐
Technically I'm the only SGI engineer left in the country, even though I only work with a single SGI legacy product ๐
And I've never worked in SGI
๐คฃ
Both of my two colleagues who work with DEC hardware is nearing retirement, so I'll be stuck with that also at some point
I'd a friend like that with COBOL - everybody else had left, and since he'd had some experience, he got it
Job for life, but a pretty lousy one
Works out great in payment discussions with management though
There is that ๐
much success, I can now drive my projector from hass, add a little node red and I'll be able to say "hey google, play x on the bedroom tv"
tho my ui suddenly got more crowded...
how do I hide background bits on the dash?
uh, I should probably move back to a different channel lol
#frontend-archived @steel tartan ๐
sorry, getting carried away and it's 3 am ๐
๐คฃ
@steel tartan where are you about? India? ๐
No wait, NZ perhaps
I thought the clock was 21 here ๐
Australia
hey guys
how you fine folks doing today
any new items you plan on working on this weekend?
im gonna try and get the facial recognition working
the one they showed in the 0.91 release
Do anyone know about something to connect to HA type radius server. Im using Ubiquiti on my whole network, but with 200+ IOT things I want to start splitting up the network with VLANS. I know Ubiquiti support setting VLAN on wifi over radius, but I cant find any linux radius server that is tolerable manageable (outdated UI and horrible experience) - anyone that have a good strategy keeping multiple VLAN with one SSID?
heh I had the same issue, was contemplating writing my own ๐
Hi guys & gals quick question.
I have pi3b with google and alexa installed and working fine (both show up as devices in mobile app also), can i add homeassist as a server on the same OS or will need to install hass on a different device?
You can either follow https://www.home-assistant.io/docs/installation/raspberry-pi/ for a manual install of a Hassbian type install, or follow https://www.home-assistant.io/hassio/installation/#alternative-install-on-generic-linux-server to do a Hass.io type install
However, I'd suggest that you're better off buying another Pi if you're going down the Hass.io route
Thanks.
So it should work if i do a manual install.
I agree I may run on a seperate pc afterwards once I build things up but initially just wondered if it was possible.
It will work - many of us don't use the Hass.io installer
Heck, many of us started long before it was even a concept
@clever mortar great more late nights for me I forsee ๐
@late gate just out of curiosity why not a second SSID? Iโm planing to get my sensors also in a different VLAN but at the moment Iโm planing to do it for teh wireless clients with a second SSID
I got my first sonoff's 8285 yesterday and installed tasmota on them their working great so bow ive got the bug to automate my home fully ๐
@lone heart because adding SSID will degrade the wifi, while assigned VLAN on one dont
@late gate yes Iโm aware of this, I tested it in my setup wich two AP and the step from 2 to 3 SSIDs (or 3 to for if you want to cont the 5gHz SSID extra) with about 60 clients was not significant degraded. But 200 Devices and another setup is maybe different.
@lone heart Personally I have no issue with running multiple AP. It was also about the simplicity to keeping it to one, and not having to move over units. I was also thinking about installing windows 2019 in a VM to just control the network stuff as unify will integrate directly into it
@late gate From the handling point it would be a clear advantage. I would need to flash a lot of devices for the new SSID. Maybe I will add this to my futur projects pile ๐
hehe yeah I think its down to being a bit lazy having to go through all units. I just want to have a local administration where I can do things like MAC auth with no need to do passwords etc on devices and eleminate people to guess the wifi passwords
just so sad its no real linux alternatives. the only UI for freeradius is something that lokks like from 1995
thatโs really unfortunate
yeah I will just run a win server for now. running unraid so quite easy
I went to Linux Fest Northwest this afternoon and there was a talk called "Home Automation with Linux that doesn't rely on the cloud". It was basically about Home Assistant and IoT devices.
Yay
@wary jolt - Side note, I've got family in Bellingham ๐
Bellingham is a beautiful place! I love that little town.
My aunt & uncle own the Fireside Martini and Wine Bar, so next time you are in town, drop in for some drinks and Jazz. ๐
@humble pond, Oh man! I will do so.
I will probably be there later this year. I practice Outrigger Canoe Paddling and my team competes there every year at the Bellingham Bay Classic race.
@clever mortar figured out that undervoltage issue. Was caused by experimental kernel. Reverted to stable and now rpi runs at full power.
Tinkerer is away for 9h 57m 14s with a message :point_right: The enemy is always in the mind
What would be a good base OS for HassIO? - Just using ubuntu - But I dont think that the Gnome desktop is needed
#330990055533576204 would be the place to ask that ๐
The advice in the docs is Debian or Ubuntu, but obviously nobody expects that you'd install a desktop environment...
Realy? felt like a random question... Mhmmm I guess there must be a flag for no deskop env installaton ๐คฃ
Ubuntu server ๐คข
lol - What you prefere?
debian 4 lyfe been sticking to that since 2002, before that slackware ๐คท
Which was a pita with no package manager but was very good for learning Linux
Did run Gentoo for a few years on some stuff, and I am suse certified ๐
Did also got gentoo a run - But this deam Dell pc is very anoying to set up - what struggles I only had with the grapical drivers or the LED stripes on the side or Kernel panics at shutdown. but yea - Did learned some things - but gave up too fast - When I get a new laptop I ll get it another spin
nice, I never noticed this before when running a cat /proc/cpuinfo ---- bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf
@clear ferry that dosen't say if the system is vulnarable only that the cpu is affected. You can test the actual vulnarability with spectre-meltdown-checker
in case you don't know this
yeah, I just never noticed that before, but I haven't really done a cat /proc/cpuinfo in years ๐คฃ
I was just looking for if my cpu had avx for tensorflow
yeah it is good that it is displayed there.
it makes it easy to grep across machines, nice when I do some checkups on the HPC stuff with 1000 nodes and a distributed ssh where not all nodes are the same ๐ค
then I can just do a dmidecode for the BIOS version also to see if they are patched or not
Wich power maneger uses a minimal debian install (Want to turn off the display)
(there is a DE useful)
Just install the server option, with no desktop
already installed debian without desktop - or should i also had to disable the standard system utilities?
Hang on, all you want to do is turn off the display?
was the Idea - until 10 secconds ago - there is an timeout as I see ๐
Thought that was default these days... it'd turn off if idle weird
Yeah, thought that'd be the case
had to set things with xdisplay on the other macbook.
(so nice for me that everyone throws this laptops away)
https://github.com/custom-components/custom_updater So does this mean i just have to wait until its updated for .92, or did he only disable the auto update and i can update it myself?
I'd read that as it has been updated for 0.92
However, if it auto updates and you're not on 0.92 then it'll break
Im on 0.92 since some minutes, so ill recheck the folders etc in custom_components right
In that case, you should be able to update it manually
Hey everyone
I got my Raspi
๐
I got it in it's little case with it's adorable fan and heatsinks
It's so much smaller than I thought it would be
@clever mortar i cant find the 5.0.0 release, hence i think what he means is that till v5.0.0 is released, it cant be updated
๐คท
i guess we will have to wait and watch ๐
okay, my bad. v5.0.0 is available for manual instal
ignore me, im a doofus @clever mortar
@clever mortar good thing we don't have any of those here, you should move here ๐
Spent last night trying to extend the tplink component to support the HS300. Seems.... I need to do a lot of reading on how the backend works. ๐
installing hass.io
Internet stuff always gives me a headache
I was trying to MITM my printer the other day to find out when it was out of paper
I've now got a cute little computer sitting on my living room
The Raspi B+ must have a good BT antenna
I'm getting an RSSI of -9 at the WORST
I've never seen an RSSI below 30 before
The HA side of owntracks works great, but the android app seems to be reports less and less reliably. Whats a recommended go to alternative for me to try out instead?
I love traccar
Amazon: adds cool Frount light to kindle
amazon: change battery to acommodate light
@clear ferry Cool, looks interesting, will test it out. thanks
So I picked up some of the gosund wifi rgbw blubs and I was contemplating whether to flash them or just use the Tuya component..any thoughts?
does tuya component even support rgbw lights?
These were the blubs- Smart WiFi LED Light Bulb A19 800Lm, Multi-Color, Dimmable, No Hub Required, APP Remote Control Home Night lamp, Work with Amazon Alexa & Google Assistant (2 Pack) https://www.amazon.com/dp/B07G2CM96F/ref=cm_sw_r_cp_apa_i_l0XXCb0VHZWJM
Looks like it should since it uses the smart life app
any way to trigger a restart of camera stream? rtsp stopped (confirmed the stream still works because cameras are still on) - just need a way to restart the camera stream in home assistant without restarting home assistant itself
@clear mirage I would go tuya convert, no cloud gibberish ๐
@clear ferry yea i was thinking that too.
@static prawn How did the talk go?
@pallid nest thanks for remembering, really well!
https://docs.google.com/presentation/d/17qT5KTAaCzAe8WTZIEXfy3X8SQ6SBMPsqklyQMUEjvA/edit?usp=sharing
You have a typo on slide 13
@static prawn Good to hear! Can't wait to check it out.
@static prawn Also, good to find another GTI driver in the HASS community. ๐
Hey there guys
I can get a Google Home Hub for $70 at Rakuten
Is it worth it?
do you have any other GH devices? That seems very cheap even if you don't need the display
I have a Google Home Mini is every room haha
home hub is very cool for kitchens
I want a home hub too ๐ฟ
Only $70 at Rakuten!
Not for sale in Norway ๐
not for us eu mortals
Ah okay ๐ฆ
i got one for 120$ just waiting for my brother to bring it
I'm actually in the EU too
I even considered a day trip to the UK to get one ๐
My brother in the US is going to forward it to me
I have a home assistant RasPi home hub ๐
So got kind of a random question here - anyone here actually use Google hangouts?
I can't say I do
Whenever I see a request for Google hangouts I immediately think scammer.
add me to google hangout. I get you home assistant at goob price
A-Men man
A fucking men
"The computer keeps making my Earl Grey cold even though I tell it Hot" "Didja try turning it off and on again?"
So true...
Were it so easy.
Yup. But that's basically how I see Norton..
I'm running Windows Defender and nothing else
@static prawn, Great talk man! Thanks for the presentation!
@valid halo i always thought a faulty replicator would be taken more seriously
What if it replicates arsenic instead of sugar
any recommendation for BBQ thermometers? I have rfxtrx, homematic and hue
goodmorning to all, nice to meet you
ayyyy
Had a HA Win today
Alexa for all her millions of dollars said "Office Light is unavailable." while Home Assistant was like NP fam and turned off my Wemo Outlet
@valid halo nice. I dont think i could bring myself to purchase an alexa..
hey guys i have an amd 5350 I want to use a pico psu with. You think I 60w is fine or should I get a 90w? Right now just using an old HDD but will get an ssd
i think it has TDP 25W so 60W is good enough
unless you sneakily stuck in a powerful graphics card
no its going to be a ubuntu server/docker setup I was to move HA and related dockers to it
want*
i have a J3455, 3 classic HDDs, an SSD and some internal fans and it never goes over 36W
im using it right now for pfsense and unable to check the wattage as I dont have a meter so was just wondering
good to know though buying a new case and psu on ali
Hello., about to transform my raspberry pi+ zigbee_Bluetooth Le module into the Homekit/home automation toy ๐ Excited to be here
hi anyone knowleagde how to update firmware on liteon drive on phat xbox 360i got backup of th key
omg years ago I still wish I remember
@shut raptor if a game have xgd3 will it auto update or will i get warning first?
in agb you mean?
xgdb3 iso games
not sure
im not sure i used those isos back then
there are tuts on youtube how to burn those
that i know i got liteon burner for that
yeah so do I sorry couldnt be a help it was too long ago when 360 was relevent
@shut raptor you gor ps4?
yep
with esp8266`@shut raptor
running backups
@shut raptor http://wololo.net/2018/05/29/how-to-set-up-the-5-05-ps4-exploit-on-your-esp8266-device-windows/
oh cool
mDeam.. Wanted to change the display driver on this HP tablet - I guess I changed the USB driver - no mouse/keyboard - yaaay
I used to buy broken Xbox (original ones) back the the day and repair them and chip them and sell them, but for the last 12 years I only buy used games or discounted ones anyway so I haven't bothered doing any hacks on any console
hello bois
@trail crag have you ever played around with giving dockers their own IP in unraid? not sure wheres the best place to ask you about it
@mossy surge here and there. I gave the pihole docker container its own ip for example
But I don't set up each one with their own. Most are using the server ip and their own ports
i actually just may have found my issue ;-;. been trying to give nginx proxy manger its own IP but it wont change the prots when i type it in. im seeing a post saying they are hard coded
im trying to do some local dns stuff with pihole and want to push those requests through to nginx so i dont need a lengthy custom list
i still have my nginx proxy manager installed but not running. That is one i didn't change as I look at it now
also just wanted to say since you helped me out with setting it up in the VM a while back i had very very little issues with it
actually, it looks like I only have pihole and bookstack with their own ips, heh.
setting up home assistant
nice. Yes I have had no mystery pi-like hardware issues at all
Anyone notice the myq component is now unavailable? Just noticed mine is a couple hours ago
Unfortunately I think they might have killed the endpoints in their api
Damn. That is unfortunate
indeed, i hadn't noticed... mine didn't change states to unavailable until i tried to open the cover.
Well hopefully someone will figure out a hack.
Way she goes with cloud based platforms. Especially when they're made with undocumented endpoints
I'm just going to switch to a DIY solution. If they're going to make their platform unreliable it's not worth using
Yea I agree. I inherited my MyQ from the previous owners. So I'm not out anything.
I had no knowledge of HA when I bought mine, so that was unfortunate
They aren't that much more expensive than non-smart openers though
True. Although since i can just push a button I dont mind doing that. It was nice though pulling into my driveway and having my garage door open
My wife uses the button regardless, I just like having it in HA so I can see if it's open remotely
Ah yea that makes sense. One of my coworkers has the same one and he just uses the app.
What would be annoying though is of nest did the same thing with their api
I'm not a big fan of cloud connected smart home stuff
He says while owning three Google Homes....
But I wouldnt trust a random corporation to protect access to my garage door
"The weather is sunny!" Said the Google Home evily. Knowing that it would start raining at exactly ten minutes past the arrival time for the family picnic.
Mhwuahuwhahwa
Skynet is here
Although to be fair rain can be very localised
I got rain damage to a phone once and tried to get insurance
The insurance company said I was lying as there was no rain recorded that day
Barstards
That's why you set up a private weather station
then defeat them with the power of MLA citations
It worked again when it dried out so i never bothered arguing with them
What device
Yeah sounds about right
fuuuu - there I try to get WoL working until I see the option AC Recovery.. After I use a smart plug for the pc.. tats all I need ๐คฆ
Ac recovery won't help you if the machine is turned off though ๐คท
Using a small PC bought from one of the cheap ass chinese sites last year as a firewall/router. Has actually worked great using very little power. Unfortunately the damn mSATA SSD in it just want bang ๐ฆ Have the old router as a backup, but none of the nice magic for hitting HA from my phone setup ๐ฆ
atm its working fine - whenever I turn on the plug the PC starts
I think I got grafana working
Though I think it /influx DB is getting a fit somewhere about representing the on/off state of my light
I know a lot of people here have purchased from Gearbest. Has anyone ever gotten them to successfully reship an item? I ordered a phone on March 20. It shipped March 23, and there have been no updates to my tracking info since then. Customer service keeps trying to delay reshipment and keeps feeding me lies about them contacting the delivery company.
All my previous orders arrived in 10-14 days
I'm on day 43 now, and day 40 since any update.
IMO just mention the word chargeback
Since you have not gotten an item
Itll motivate them.
I was on day 12 of waiting for a CC refund from RallySportDirect. Said I would get my credit card company involved and recover the costs that way. Refund magically showed up today.
Hello, I just joined the channel. I'd like to move away from ZIPATO and start using HA. I will install HA on a RPI3 and maybe later on QNAP. but my question? shall i exclude all zwave from Zipato and then include them again in HA? My Ziapto is actually broken, so cannot use it anymire..
Hey i have problem with target what have i done wrong its for the first one. https://paste.ubuntu.com/p/vbs35BQcRJ/ this is errorlog when i run this script. https://paste.ubuntu.com/p/JF92XN8ZPD/
Just factory reset your zwave devices and reassociate, also zwave questions go in #zwave-archived @midnight adder
@mossy zealot probably something for #330944238910963714
oh wrong change thax
@distant stream My one concern with mentioning that is that I'd prefer them to reship. If they think I'll charge back they might think that it's not worth reshipping as they take the same loss either way.
Yeah thats a reasonable concern
Ive always had really good online shopping experience until this last month or so.
Shopping for somewhat high end car rims and accessories. Total nightmare
I hardly ever shop offline anymore, except groceries ๐คฃ
I needed time to think to get my memories from my mind!
Hell is pretty cold in metric standards though
@trail crag are those lovelace components?
@amber bramble its the mini graph card https://github.com/kalkih/mini-graph-card
and a nice theme
@amber bramble yeah that's the mini graph card with the dynamic color bar option
what theme is it?
I've seen that but it does not have the rounded edges?
I added those
Wanna share your customization of it? ๐
clear dark
sure...it's actually a little low contrast for me and I meant to tweak that too
@vast dove https://paste.ubuntu.com/p/XCWvSTPRZw/
there's both. I threw the rounded corner line into the dark one too
thanks
@vast dove I didn't notice this till now
lol ๐
Hmm, has any of you found a consistent way of turning android tablets' screen on and off? (And keeping them on when you want it)
For a console ? I just enable debugger mode on Android and select keep screen on when charging and stick the charge cable in on my fridge tablet
I'd rather not have a tablet with the screen on 24/7
I've got a turn off/on system working consistently with Tasker and an MQTT plugin, however it seems after the display has been off for X amount of minutes, it just decides to disconnect from the MQTT server.
That feature will keep the screen on if you turn it on and off if you turn it off ๐คท
I've got motion sensors in every room, and I want the tablets to turn on and off automatically.
No amount of adding to battery optimization exceptions, setting performance mode, wifi always on, etc, seems to keep the connection alive...
That sounded like overengineering ๐ค
I'm up to about 100 yaml files. I'm way past over-engineering. ๐
The most stable I've found so far is Join, however that requires internet connection, and tends to go wonky on the regular.
Tried Fully Kiosk Browser?
love fully
Does anyone here use the Logitech Z906 sound system?
Any hibernophile or scotophile know if Daoine Sithe is pronounced deena shee ?
@trail crag I'm not sure, myself... but here's two Irish dudes opinions: https://forvo.com/word/daoine_sidhe/
damn I thought I had checked forvo
thanks, that helped
I lived in Ireland for a year, I can't tell you a single word in Gaelic ๐
I still want my home to have a wallet I can automate. I'm working on a Proposal I can submit to the IOTA ecosystem to get funding for development if anyone want to help. I have started my work on an initial draft if anyone wants to look it over.
https://docs.google.com/document/d/e/2PACX-1vQf74cTXqDVIBi43qmAuYDh-tf95OJIy-Z5S4LlEuq4ftGM-QzFO7T-szT-KGCcSMac1cDWu6CueUsi/pub
I do declare there were times I was so lonesome I took some comfort there
Laรธalalala lalalala ๐ถ
Hi everybody. Great to see that there is a lot of people over here
An automated wallet?
Hello, I'm new to this whole home automation, is this the correct place to ask some questions before I buy stuff that won't work together? ๐
There's a bunch of channels
Pick the one that's relevant (for example, if you're asking about Z-Wave, try #zwave-archived)
If it's "build it yourself" then #diy-archived
And so on
For everything else, there's the component list, and #330944238910963714
I guess 433 is a #diy-archived then?
If it's off the shelf, using the build in component, more #330944238910963714
If you're soldering stuff, or otherwise assembling things, then yes #diy-archived
ah, got it, thanks
Hi everybody, I'm a bit OT. Any of you here using pi-hole (doesn't really matter if through HA or raspberry or other..).
I'm trying to have mine working but sometimes it just hangs and won't load pages.
Google brought me here https://discourse.pi-hole.net/t/pi-hole-not-loading-websites/3872
What I know, is that my ISP gives me a ipv6 and this is a pain in the ass for me for many reason.
Any of you here who solved?
Yeah I don't use ipv6. So far mines rock solid. Lemme read that look
unfortunately mine never worked. only today i reached this page but it should be something old. still.. can't get it right
I think they have a discord. Have you tried that?
I wouldn't know where to start. I don't even know if your pi is set up properly
Ok
no worries i'll try (: thanks mate!
Np and good luck
Pi-Hole is nice
yeah it's great. it's my isp the moddaff***
Tipps for configuring Pi-Hole?
When I set it as a primary DMS server in my DHCP settings and I reboot the hass Host I crypple my whole lan due to no name resulution
Haven't used Pi-Hole, but DNS has a built-in mechanism for this.... Multiple DNS servers ๐ Is it possible to run multiple Pi-Hole instances and sync the config etc?
Lot harder in execution depending on the state that has to be shared between instances.
I remember I set my Pi-Hole as my primary DNS and set 8.8.8.8 as a back up
Huh
turns out I need to set my Pi-Hole as my only DNS for it to work
if I set 8.8.8.8 it uses that
if I set 0.0.0.0 then it uses Pi-Hole
did do almost the same - (1.1.1.1) But the Pihole isnt realy down - so I sttill dont get an name =/
?
The ability to resolve hostnames on the LAN. For example, connecting to a machine behind the router by its hostname will not work.
This shows up as Caveat 2 under "set pi-hole" as only DNS server