#the-water-cooler
1 messages ยท Page 287 of 1
SDN fabric, I allready use the SDN EVPN
Thatโs out of my knowledge league haha
traefik is my ingress with a network ip on my lan and another on a EVPN proxy network
You need to check it out, you can set up networks that work across all of the nodes
I donโt really feel like I have a good use for that with my two nodes lol. I just use the default networks
I also have 2 for now but it keeps them off my network and the vms can migrate
well mostly lxc openSUSE Tumbleweed Podman containers
cant fear auto updates when its soo minimal... ping is not even installed
No. I am officially "on the spectrum." ๐
And autistic people tend to feel that phrases like "Aren't we all a little 'on the spectrum" or 'a little bit autistic.' " tend to normalize the struggles we face being autistic. ๐
Tell me I shouldn't buy this..... I really want too https://www.amazon.com/Resolution-Response-DisplayHDRTM-FreeSyncTM-LS40FG75DENXZA/dp/B0FJYNVR3R
meh its 1000R to curved for me thankfully
My apologies, I definitely wasn't considering that perspective
I'm ADHD and AUD, it didn't bother me, but I've come to decide its a gift not a bad thing, just need to know what you're good at ๐
No no. You are autistic, not on the spectrum.
Welcome to the club!!! 
There is a growing number of autistic people who do view it this way, yes.
It's all right, not offended. Just wanted to mention that some of us autistic people DO tend to get a little persnickety about it. I tend to take the educational approach.
Understandable. I definitely didn't mean it in a disparaging way either
It's all good.
I understand the joke, because yes I can see a ton of neurodivergent dorks in this community, diagnosed or not.

(lovingly said)
a wild Ludeeus appears
@lone dagger we've had this discussion at least once in this chat lol
and disappears
That's why the only support in this channel is mental health. 
I've been starting to realize that the who AI thing may affect AUD folks more then neurotypically as AUD are more black and white and process thinkers
This whole presidency affects me more than AI does. ๐ Government shit nowadays stresses me out more than anything. ๐
My son isn't formally diagnosed but he's my tiny little clone so we know. But finding a neuropsychiatrist who will test for children with the new symptom standards is....not easy.
10 years later.

I have 1 child who's AUD/ADHD, one who's just ADHD, its genetics. I think AUD and ADHD have both been around for a long time, but they were just the odd duck kids who never got married so genetics weren't passed on, as society has been more accepting of people who are different(not with standing current climates)
Home automation happens to be one of my special interests... I love programming and seeing things I code work, gives me that dopamine hit that keeps me coming back.
There's no think about it - it's always been around. You can see it in several famous people throughout history. We just figured out better definitions.
But yeah, my son being autistic as well, adds to the fact that it is genetic.
For example, you wouldn't (likely) label me hysterical (or maybe you would) in these days but you would have 150 years ago.
Hell, when I was a child, I was screened for it and not diagnosed. (Despite being non-verbal until I was 4 and being in speech therapy until the 4th grade)...
I was a late diagnosis (diagnosed officially TWICE when I was 36 by two different people).
I couldn't even be diagnosed with Asperger's (which is now ASD level 1) because of my gender until a decade ago.
I never would have been identified as a child no matter what.
Just goes to show in that much time, the screening process has changed, and proves that the increase in autism diagnoses isn't an increased prevalence, just improvements in how it is screened.
I was diagnosised with ADHD and cyclothymia as a kid, I'm really more Asperger's then AUD, so is my oldest son
(asperger's is autism - just make sure you know that)
(but we don't talk about asperger fuck that guy)
I am quite aware teh DSM 4 doesn't have asperger's anymore though
It's 5 now, but I believe 4 removed the dx
That is why it is commonly called "the spectrum" The ASD spectrum combined a whole bunch of autism-related diganoses into one combined term.
They just changed the name, not the diagnosis.
My diagnosis report even specifically calls it out.
An umbrella term, as it were.
I personally think that when I was a kid they just threw darts at a diagnosis list because I was different
And don't even get me started on the levels... ๐
Nah, it's definitely because of vaccines /s
Hope that's sarcasm. ๐
Acetaminophen.
We now live long enough to be diagnosed ๐
I can't tell. 
That's what the /s is for. XD
Oh definitely, that's what the /s is for 
Ah. Thanks for the clarification.
/s basically means sarcastic for anyone not familiar lol
REDDIT AMIRITE
not a redditor
I've seen it more used on discord than reddit but now im starting to notice it on reddit too haha
I've used it for at least a decade. ๐
I miss ICQ...
Yahoo Messenger was great until the bots started taking over and Yahoo didn't care. ๐
sadly that sentence applies to a lot of formerly great services
Discord isn't there yet... as groups are humanly managed for the most part.
But yes, there has been a gradual increase of bots friend requesting me. ๐
Honestly what I really miss are the IRC good old days
My 6 digit ICQ number 
i grew up on IRC. nothing will replace it
same
lol nice, i had 7
fun fact, i've had this nickname since childhood...but at maybe 15 i met a girl on ICQ via random chat and her name started with "crazy", so i changed mine to match...30 years later i still use it.
Can't say I ever used ICQ or IRC. ๐
I wasn't allowed to use ICQ, now guess my age lol
My IRC name was Kornchild.....stopped using it as I hit my mid 20's and also got tired of being asked if I liked Korn
TPC I'd say about 35-40
My username used to be weirdo_n.
I'm 45 and ICQ was right about when I hit my mid to late teens
(Before I knew I was autistic, I knew I was "weird.")
43 here, that checks out
<----- 43 as well.
You know whats great about being in your 40's with a decent job, you can but stupid crap that you couldn't afford in your 20's(I just bought a security camera with manual zoom to look at our bird feeder for Frigate)
Far off, 27 but I've been on PCs and the internet far too early because my dad used to sell IBM (!) Computers and notebooks so we always had the latest stuff at home
ICQ was late 90's, early 2000's
Late '00s in germany afaik
Our house didn't have a computer until I was at least a sophomore, so my PC/Mac experience was from school.
damn, I started on a commodore 64
48! I remember Chernobyl!
ICQ was a cross-platform instant messaging (IM) and VoIP client founded in June 1996 by Yair Goldfinger, Sefi Vigiser, Amnon Amir, Arik Vardi, and Arik's father, Yossi Vardi. The name ICQ derives from the English phrase "I Seek You".[1] Originally developed by the Israeli company Mirabilis in 1996, the client was bought by AOL in 1998, and then by Mail.Ru Group (now VK) in 2010.[2]
Amstrat CPC 464 and C64
Pre-Computer 1000 (a single LED line screen) that I self-taught myself BASIC on when I was 4th-5th grade.
I learned "Basic" on a TI 85, making a number base converter
i remember getting the computer magazines in the mail and typing out the pages of basic code in the back to make a "game"
And made a website on Angelfire before they started shoving ads everywhere. ๐
And Geoshitties
(The page still exists, although it can not be editted any more, and is in a pretty broken state)
I revisit it on occasion for nostalgia sake.
I got to meet Dick DeBartolo sp? Several years ago with Leo Laporte at his studio.
.... I saw that edit
I still remember when Lenovo bought the Thinkpad brand, my dad got invited to beijing. And that was the first and last time Lenovo ever did something good for his company lol
hell yea dude thats awesome
My closest brush with famous people was when I was an IRCop for Gamesnet, knew the orginal counter strike people personally(well online personally) along with some of the valve folks
This was circa 2002 I think? The whole reason I bought Halflife is because I was told that Team Fortress 2 would be on that game
wonders if Gabe ever figured out how to count to 3
wow Half Life orginal was 1998, got I'm feeling old
I played the hell out of the original Counter-Strike. (with bots and occasionally others online, but never been a big online gamer)
My first online games I played where Quakeworld Team Fortress, it was awesome
I had a voodoo2 with Glide it was awesome
I played online until people started cheating online... ๐
Half Life HL2 was the last game I was really in to and it was the best. I remember it startling the hell out of me a few times as I was playing
Played many capture the flag games
I had a friend I played with, (which was the only reason I played online at all)
team fortress was CTF with different classes
Spy, engineer, solider, demo man, heavy weapons, medic...I think thats all
There were a few mods that added that into Counter-Strike...
Like the Spy would look like a member of the other team, etc.
Latest game I played online was Among Us.
CS beta 7 over dialup was fun
Unless Switch games with my son count (the retro games cause I feel my son should start with classic games before getting into the newer stuff, back when games were tough)
I was HPB until I loaded Quakeworld on our college's computers
damn, The Smartest House wasn't kidding about orders being delayed... my order from Monday night still hasn't shipped 
I was tempted to email them for an update, but that (1) wouldn't result in them shipping it out faster and (2) would just cause more of a delay lol
I'd sit and play computer games in our compuiter lab
did you die of dysentary
Yes. ๐
i'm convinced The Oregon Trail isn't even possible to beat
I've beaten it.
although the last time i played was when I was an idiot kid, so there's that
But can't say I've ever beaten it with not one casualty along the way. ๐
tempted to order a couple of these, even though I don't need them
now that I'm an idiot adult, i should try
Z-WAVE SWITCH REBORN PRODUCT HIGHLIGHTS NEW: Hardware VER 3.0 with redesigned button panel. See the ZEN32 Change Log for full details. On/off Z-Wave and manual control from the main button: use with 120 V lights or fans under 3 A 4 smart buttons for remote control* NEW 800 chip: more range, faster signal, SmartStart in
temptation went to fruition
I want to eventually upgrade my HA to a mini computer. ๐
thats why i have 2 kids
what are you running currently?
lol
My Raspberry Pi 4 is fine at the moment, but if I want to add AI to it, then I have to upgrade it.
I am running it on a RPi 4 with a SSD attached.
oldskool
But I've been looking at adding Ollama at some point.
And I don't think RPi4 will do well with that.
I am very new to HA so my system doesnt do much yet. a pi would probably be great. but ive been consolidating my running systems as much as possible
I built an unraid server recently so it lives on a vm there
i have a 3060 12gb in my server for local LLM. its not running yet, but someday lol
I've been running Ollama on this computer and having HA access it via the network(7900xtx), qwen 14b works slick
do you only use it for HA or other tasks as well
meanwhile I can only run 8B Xd
i just joined this discord and was hoping to see an LLM channel
specifically for HA integration
oh ok cool
Oh wait
ty
ahh thank you @weak musk
I just started using the cloud models via Ollama and it is nice and so far Iโm getting everything in the free tier. Using GPT OSS 120b cloud and it is pretty great although cloudโฆ qwen local only is underwhelming on a MacBook Pro M1
I haven't looked into the free cloud models, do you get enough tokens a month to run HA?
I want as much on-prem as i can get. I am sick of being mined for my personal data in everything i do.
Iโve been using it for a few weeks and it has responded every time and very appropriately
I want all local as well but waiting until I get a better perspective on what hardware I want to invest in.
Without building a โgamingโ PC a Mac is what Iโm leaning on.
@weak finch are you running gpt:oss:120b-cloud through Ollama?
Yep
Hmmmm wonder if I coudl just a standard Ollama container or if I need to use the intel one...
Mine is in n an M1 MBP
Time to find out, since my unraid box has no acceration other then igpu and thats being used by frigate right now
intel one might be 15% faster
if its cloud based what difference does it make?
I have a local Ollama setup too for fallback ๐
Granite 4 has a decent 7b model with 1b active
Mine uses igpu for jellyfin transcoding and the 3060 passed through to a linux vm that will eventually replace my physical desktop plus host ollama
great for cpu
same here but on a windows vm
If I shut off the windows vm, the system idles 10w higher because of the gpu lol
eve smartplug
nice. i have a kill-a-watt but i dont want to put mys erver on it and never get to use it again lol
i should get something that monitors it constantly
I have it just to turn off the psu since I have a full atx psu connected to a DELL SFF
1 riser cable later for the gpu and my....... server works lol
thats awesome. I am cheap and have been hunting for parts for the last 6 months. I have an i5 10400 in a 4u rackmount case in a rack under my desk and it runs everything for me
I badly need more cores
what cpu?
my gitlab runners are hungry
8th gen i5 with only 6 cores 65w on that server
beelink s12 as the other node
a pi4 is a quorum device only
i dont have a huge need for compute at this point so the 6c/12t i5 has been plenty. that may change but i like that it sips power compared to my desktop with a 7700x and a 6800xt. plan is to retire the desktop fully and use the VM with the 3060 as my main system. my office gets hot and i dont want to install a mini split lol
dammm... I would trade my 2060 super for an amd card
I need to look for old servers on ebay
would be nice to grab something with at least 16 cores for a decent price
i am trying to balance my compute needs with the amount of BTUs i can handle all day
same
since i wfh i sit next to the server a lot
my setup is low power
Do I need to do anything other then pull the model over to Ollama and start it?
You have no idea how badly i want to run Harvester
as in do I need to register somewhere?
i would love more BTUs tbh
itโs cold now here
I am not familiar with Harvester. just looked it up and it looks pretty slick. likey more than i see myself ever needing but it looks like fun
I live in SC and my office windows face SW. its hot in here all the time
windows are currently open
oop itโs 5c here
ill be in Detroit next week for work though so i will get to see enough snow for the winter
Yeah, luckily I won't be dealing with Detroit-level snows yet.
But we are supposed to get 2-5 inches tomorrow. ๐
@ snow
And right now... it is 32ยฐF (0ยฐC for you metric folks)
โ
50s and sunny this weekend. i can live with that
You need to create an account and login to use cloud models. It was really painless.
โ
i still like to have seasons. cool weather is ok.
I live where summers can be very humid and hot.... and winters can be very snowy and cold... ๐ I would just like to live in the middle. ๐
But why?
https://ollama.com/library/gpt-oss:120b-cloud, I'm feeling stupid, who do I register with lol
Yeah... Buffalo is an extreme. ๐
I just clicked on the link from within the Ollama app
Luckily my winters aren't that extreme.
I'm running Ollama CLI
Snowstorms of like 3 ft... yeah, no thanks.
You can still run the gui
Coming from LA, everyday is a beautiful day
couple years ago they got 77 inches of snow in something like 48 hours
Snow is cool as long as it's on demand
Snow is technically in demand here... I just don't like it.
We usually drive 90 minutes to get a feel for it. That's about it.
I live in South Dakota.... driving 90 minutes anywhere, just brings more of it. ๐
There is no escape.... ๐
Or else we thankful for this all year.
Snow belongs on mountains to help you get from the top to the bottom via one or two pieces of fiberglass
Ah huh.
I wish bio-domes were a real thing.
De-icing looks like loads of work.
See, they put their snow in the wrong place
Agreed. ๐
I should get heating elements to put under my driveway concrete 
Alas, that costs money.
But it would keep ice and snow from packing itself around the vehicles.
i love it when you reboot an Unifi router and it never comes back up
sounds expensive and a waste of energy
ngl
well idk what energy costs where you live but i could never lol
Nah, if I did something like that, I'd tap into solar. If I could afford to do something that extreme to avoid shoveling, I'd definitely be finding ways to make it affordable and practical.
i mean i dont have a driveway lol
But I did pay about $50 for a snow blower someone left on a curb. 
It works all right.
So, good enough I guess considering I was always shoveling before.
its ollama signin for the CLI ๐
I guess Chamberlain is hellbent on reducing sales to folks who understand what they are buying. New security 3 openers will not work with Ratgdo, etc.
Can't bypass a relay and a tilt sensor
Apparently the soldering and relay hack I used before the Ratgo existed will still work
Just hook up a dry contact relay between the button leads on a spare remote.
why even use a remote? I just use the standard button, and put a zooz relay inbetween
It was easier to neatly tuck away out of sight with a remote
https://www.getzooz.com/zooz-zen16-multirelay/ attached to the garage door opener ๐
only thing that it kinda messes up is the buttom illumination
On newer doors you have to make the connection at the button, which is often wall mounted without a nice place to put extra stuff.
Are the buttons not hardwired anymore?
(its been a while since I installed a new one)
It is a proprietary protocol between the button and the opener.
Seriously? wow they are scumbags
Ratgdo can speak ver. 2 of the protocol so works nicely mounted at the opener
so its not just a momentary switch?
exactly
I'll just buy the Menards offbrand garage door openers with no frills
and most folks that are paying attention will do the same.
I do that with ceiling fans too, to avoid the built in controllers
I really wish it were easier to find fans without the built in remotes!
I just find ones that still have pull cords, any of those usually work, even if they have a built in controller
For our larger fans, I couldn't find anything without a remote
I'll show you one that works, hold on ๐ its a biggum
Ready for the info!
Might be getting the ladder out shortly
I'd love to retire my Bond Bridge
I believe this is the one we have
controller was removeable and my old hunter zigbee one slotted in the same place
the king of fans one, but I'm sure any other fan controller would fit too
I liked it because it didn't have integrated bulbs
well it has bulbs but replaceable
Would it work with an old school 3 speed switch? There are zwave/zigbee switches.
It just has a wire for the fan a wire for the light and associated neutrals
Okay. So probably works
so if old school 3 way just adjust the voltage then it should
Yeah, we have 3 wire to the fan. Light hot, fan hot, and neutral (and ground).
4 total
my controller I'm using has 5 settings, low, medium, high, max,off(also has auto that adjusts the speed)
Looks like ours is 65" so basically the same size.
So my ceiling fan switch is just on and off, the zigbee controller fits in the fan itself between what comes out the wall and the lights/fan
if your house is more modern and wired with a 14-3 then you got it easy and could just use a wall switch and connect directly to the fan
similar to this, but zigbee https://sonoff.tech/en-us/products/sonoff-ifan04-wi-fi-ceiling-fan-and-light-controller?srsltid=AfmBOooW4QOib6RaRlq59b5Xz9CRKxsWK9rRYAuhasyZxwrqhZmnJvzc&variant=46168988319985
hmmm that doesn't look like it does dimming
Yeah. I ran 14-3 to all the fan locations.
It's back and better than ever. Inovelli's Fan/Light Canopy Module! This little module is 33% smaller than it's predecessor and is designed to fit perfectly in your fans canopy with room to spare. Enjoy individual control of your fan speed and light dim level from your favorite smart home app (see hub compatibility for
Iโve got one of those. Works well enough
They're trying to lock you into cloud/subscriptions using superfluous DMCA crap
these are solid but can be a bit hard to fit in the canopy
I've got 3 of them
I am glad that she understands, even if @forest edge doesn't
Bitey ๐ชฟ my goose friend died today 
The old school switches are meant for AC powered fans. Newer DC fans are not recommended for those as they have more electronics. The best options Iโve found for most DC fans is to just use a bond bridge and some smart switches to bind them to the fan via HA.
This was Bitey yesterday something was wrong with her
I couldnโt catch her and take her to a rehab place- I went back at 8am and found her today 
you should post these on the official Apollo channel
Like a Bitey remembrance?
I thought about making an album of all the cute videos with her in them
H3 idea?
but you have to call the video BITE-1 overview
That may legitimately be the nicest goose I've ever seen
I just saw this at menards website, are people really this dumb? https://www.menards.com/main/doors-windows-millwork/garage-doors-openers/garage-door-openers/genie-reg-universal-garage-door-opener-led-light-bulb/ledb1-r/p-1475244566696-c-12367.htm
Bitey was different
She never bit at other geese ๐ชฟ
Certain garage door openers do actually have issues with LED bulbs
It does seem dumb until you read into it a bit.. I thought the same thing originally
Iโve got a lot of them
None of them fear my dog either they just know sheโs chill
We slowly worked up to it lol
So you saying @forest edge is dense?
Just a raccoon hater ๐
You missed out on picking up the 5 that was roaming around my backyard
I have three RF fans in my house... each with its own controller... I wonder how hard it would be to get those to be smart and work with HA... 
And I have to figure out a better solution for my TV as my Broadlink range is so limited, I literally have to have it positioned directly in front of the TV for the IR to be picked up by the TV... which isn't convenient for the lay out of my set up. ๐
I suppose the fans would be easy enough by getting a RF blaster that can connect to HA. 
(My Broadlink can not as I ordered the one on Amazon not realizing that ordering the one directly from the company had both IR and RF frequencies.) ๐
I used a Bond Bridge Pro for this. The Home Assistant side is fine, but the Bond stuff leaves a lot to be desired. The main problem is Bond cannot track entity state so it just assumes that the command was received.
.... well.. yeah?
That's sort of how IR repeaters work?
Usually Blasters are a one-way type deal. They send but can't receive. (As far as I know)
My major gripe is with my TV (my 8in1 switch works great with the Broadlink at its current position).
hence the name ๐
However my TV requires direct line of sight and I am not going to have a Broadlink IR Blaster sitting smack dab in the middle of my living room for that to be feasible. ๐
Hey, anyone have this problem?
I definitely have login credentials correct...
people get it all the time, make a thread in the right place. and you will get the solution.
Yeah.. thatโs not really fixable with modern DC fans. Youโd have to change the whole fan to one with smart functionality built in or get an old school non-DC fan
I really hate how remote control fans are being pushed so much
or hardwire something in, really.. ๐คทโโ๏ธ
anything modern can be hacked and such if you have the knowledge
a lot of fans thatโs not feasible because they use such complex boxes. All different kinds of voltages and some fans have more wires for certain functions than others.
Iโm sure its possible but most people arenโt going to want to do it
at this point it probably also costs more in parts than just buying a cheap fan that has something like tuya built in and using tuyalocal
find a creative way to hide it ๐
someone must have been sleeping on the signal blocking. thanks for the heads up
For now, I just leave them be. I would need to setup scaffolding to get to one of the fans and we leave it on 90%+ of the time at the same speed. I just setup a z-wave switch to send commands to my Bond controller for the other.
Yeah, with mine I keep them on as they are air circulation. ๐
But it would be nice to be able to issue a command (or set up automations) to reverse directions/change speeds as needed.
This is what Iโm planning on doing for a relative. Two zwave switches one for fan light/dimming one for speed control like old school fans. I had them get a tuya fan for their living room recently as it seems like you can get full functionality in HA. Sucks that the RF bridges like Bond canโt see status
My "would be nice list" is too long for me to worry too much about the fans
Yeah, same here.... I want outdoor cameras, presense sensors... etc...
Too many things.... too little money. 
Thatโs the problem having a homelab and smart home ๐คฃ
Surely someone who speaks from experience
Especially if you are looking for extra RAM
Yeah... I don't have a home lab. ๐
I need to raid my parts drawer and get some DIMMs on eBay
Stuff that was too cheap to care about actually has value now
Merry Christmas!! Using my Music Assistant DJ script with decorations.
I have already raided my parts drawer. ๐
When I upgraded my computer...
Before Windows decided my beast of a computer just isn't good enough any more.

Just looks like a mess
@tidal bronzehow you holding up in the land of the sane?
get you some chicken and mashed potatos yet?
Thought corn was the only thing Americans eat
Thatโs still a touch cold
is that what the roo teachers teach down under?
I just hear all about the corn syrup and corn whatever
how do you retain any knowledge after getting kicked in the head so much?
Is that what they teach over in America
well he grew up back in the lead poisoning days so his "learning" was really more just.. supervision like babysitting.. ๐
here we go
You ask for it tbf
To be on discord we all need to be older than 13
thanks to lead poisoning mental age can be much lower
๐
can even go fractional really.
you were saying
I think discord should put an upper end too
probably.
I agree. lets institute all kinds of restrictions just before you reach the age lol
but then you'd be taking away his like.. single hobby
braindeadposting on facebook and discord.. he needs something to do besides slurp down the fox news state propaganda
Yeah, upper end should be around the time dementia sets in. ๐
Maybe closer to your age
So 80
so this isn't about dementia at all but more about you picking and choosing who can and can't?
Oh no more so the ages of when it sets in
Which really is 65+ apparently
I would think a person who loses the ability to remember who they are, probably wouldn't come on here anyways...
so people who are much younger that have it are allowed?
how does that make any sense lol
I wasnโt saying in relation to any bans
I was saying when dementia was coming
I don't think you know what you were saying
But being in my 40s, an age restriction on me would piss me off. I'm autistic and this is the closest to human interaction I get outside of my family most times.
(Easier that way)
Oh yeah itโs definitely a bad idea
Itโs just funny winding sonoma up
Well then... keep turning the crank. 
So i've just finished the first release version of a Jetbrains plugin to scratch an itch that's been bugging me for years. I went to promote it in Shameless, but there's no proper category in there that I can tell for, say, 'support software' for folks wanting to use an IDE to manage a custom Home Assistant. Just wondering if this is a conscious thing or an oversight?
the back peddle lol
The truth all along
this is why people my age feel no sympathy for the hardships people your age endure
you bring it on yourselves
Do you define โyour ageโ as anything below 50
You bring it on us Tbf
Age identity? That's a new one. 
isn't it great that the "fuck you we got ours" generation continues trying to talk shit? ๐
listen old man, if we want to hear about ruining the education system or housing markets we will come ask you.
Cause yeah, biologically speaking, I am in my 40s, but socially, I probably seem much younger. ๐
Probably an effect of the autism. ๐
But honestly, how entertaining would it be to complain about how I popped my back out of place yesterday by coughing wrong...
I am almost 62 and haven't grown up yet
Thatโs your body reminding you that your physical age is slowly aging
"A huge scientific project to which I have devoted most of my life namely the attempt to prolong adolescence beyond all previous limits" - Tom Lehrer
he made it to 97 so that's currently the record it seems.
Have you guys tried the new Google Weather integration yet? Itโs pretty neat. I am though getting an Ecowitt Witboy for Christmas so it will be local.
Nah, I am using the weatheralerts integration that provides alerts from the NWS though.
(Although, I should fork it and provide updated code since it has sensors that will break with the 2026.6 update)
I went into the packages, found the weatheralerts.yaml file and edited the sensors in there so it is good for that.
But one of my main automations that I am proud of is my weather alert system.
I have one of those cololights and it changes colors based on what weather alert is currently going on.
My last house was a trailer house, and I created it as a way to get instantaneous updates if there was a tornado warning issued etc...
Especially since I do not have cable.
And yes, that light changes color faster than any other ways I'd hear about it.
But yeah, I would love get be able to get my hands on a local weather station to get local weather conditions without dependency on the cloud.
I need to dig in to setting up alerts so we wonโt get surprised by bad weather like 2 weeks ago. Woke up without power and heavy rain and wind. Turns out we had a tornado go by within a couple miles away. Lost an inflatable decoration and a power strip not rated for outsides ๐ due to wind blowing rain on the porch. Iโve since gotten proper outdoor rated plugs and strips but it was scary to think we werenโt paying attention to weather and it bit us.
Yeah, my router, modem, home assistant are hooked up to a battery back up and some of my smart speakers are as well. When there is an event like a tornado warning, every speaker is programmed to announce the tornado warning.
The alert light has a battery back-up in it as well, so if the power goes out, it doesn't.
And when we moved to our current house, I just redid the whole set up.
I became kind of paranoid about that when I lived in the trailer house though. No basement there, so if there was a tornado warning for our county, we needed to drive across down to a storm shelter / basement. ๐
So that was an essential set up for me.
nah just build a killdozer to take shelter in. /s
<@&330946878646517761>
Gone
Idk if this is the right place to ask but feel free to correct me! I wanted to join this sever to ask is there technically any free way to added home assistant to google home? Because I want to be able to see my ring doorbell within google home but donโt exactly have the money for the subscription plus Iโve been doing a ton of research but just not able to find a good answer ๐ฅฒ
It is possible, but the documentation might be outdated. #1284966582375813201 can help with the setup of the Google Assistant integration.
https://www.home-assistant.io/integrations/google_assistant/#manual-setup-if-you-dont-have-home-assistant-cloud
I think homeway lets you do this for free
@lone dagger is there going to be a christmas miracle? (Nightmare furby being finished) ๐
i hear ProxmoxVE screaming "install me on this Dell and install your favourite home assisting software as virtual machine on me.."
Yes.....
Gonna run pihole too
Excited to get into it. The house is err still under construction so.. server time
Ive been playing around with vms forever but never heard of proxmox til digging into HA
Yay this year I can get rid of the condition mess for week days in my xmas automation now that time triggers allow week days
Which one is you
Thank u!
And thank you to you too
Middle one
Why do I hear "Freeeeeeebiiiiird" when looking at that picture
<@&330946878646517761>
Gone
I asked the openai voice assistant to turn off the air conditioner, it turned off all the switches in the living room instead lol
but did it also turn off the air conditioner?
Technically yes, by turning off the socket powering it
But once I turned the socket back on the AC went on
itโs technically correct then
Is there an easy way to tell home assistant that "This lightbulb has taken over for that lightbulb?" when swapping/replacing bulbs?
I solved that by giving HA access to specific items in stead of all so this one does get turned off but my fridge doesn't https://iwillnotbuynitro.com/u/majestic-hard-occasional-allensbigearedbat.jpg
replace the ID to the same ID as the previous one :)
What does that mean?
Or how do I do that?
I need a step-by-step. I find things have two ids and do I do anything to get rid of the old one first or do I just name the new one the old name and it will kick the old out and use the new thing with the name?
Are you talking about the "Entity ID" that looks like "light.innr_ae_260_7157b1fe_level_on_off" or the name "Upstairs Hall Light" ?
I recommend going over to #1284966540617449515 for a step by step
Are you recommending a specific thread or that I start one?
I just want a page that has "This thing(picklist) replaces that thing(Picklist), hit GO(button)."
So I'm following the guide you linked and I'm confuse around "Go to the Search (/) for resources, documentation, products, and more at the top middle and search for Homegraph API and select it.
Enable the HomeGraph API." I'm a bit of a visual learned so might need help with this if possible-
WAIT NVM IM JUST DUM
same energy
ok I'm intimidated
Maybe not for Christmas but probably before the end of the year. My vacation time starts on the 18th.
I did buy a couple modern Furbies for my niece and son for the holidays, though.
Just to confirm, are we talking about 2025 or another 18th? ๐คฃ
Congratulations, worker! You have been granted leave on the 18th month of the year
I just picked up two 5070s from a friend that was ewasting them for work
At this point I wouldn't put it past her ๐คฃ
@lone dagger you need to be more like me
PTO!
|| never say when you are going to be done with anything, that way there is no pressure to actually do it ||
Something I have too much of.
I used most of my sick days but 0 vacation this year nor any personal days
I used them all but its never enough
No one on their death-bed said "I wish I worked more"
At least you have sick time!
Most people on their death-bed do wish they owned a raccoon though
pained time off?
I'm very blessed to love my job and the work I do so I end up working while on time off anyway.
paid
oh no I would NEVER
have you been to the US>
No hard pass lol
It's not a guarantee in the US. Some people are required to use their PTO first.
Bizarre
I don't disagree!
Yes. The infrastructure is quite sad
Burnout doesn't matter when you can't afford your bills already
if I were to get sick on PTO I get the PTO back XD
that is how the law works overhere
The foundation follows this as well, so if it happens to me I also do the same.
and no I am not sick often because of PTO :D
I will not knock anyone for working too much, but it is not for me, I don't think anyone here isn't happy with the work you are doing though Missy ๐
Uhh, I have issues with the long furby she is working on
I'm working on updating the forum guidelines in the new year so let's see how long this lasts. 
Hello people
My lack of pin says otherwise 
What long furby thing? Oh yeah, I had forgotten ๐
granted, that's the UK's post office not working
The thing that shouldn't have happend
No no no no this isn't my fault!!! 
Long raccoon on the other hand
If there is anything against raccoon shitposting I will be mad
otherwise I wouldn't bring it up 
pin? what pin?
Swag pins.
be prepared to deal with UK customs for a year
FOSDEM this year was supposed to have pins to go with their postcards and they've been hung up in shipping issues ever since.
I know a guy
he can smuggle it via Belgium to my house
I'll absolutely wear a
pin on my lapel
Royal Mail has been absolutely useless.
Brexit means brexit
I know a guy as well. He refuses to interact with UK issues 
3d printed ha raccoon helmet?
we have not had brexit and PostNL is useless too
well, yea. That's dutch
My shiny stickers must also been hung up in shipping issues

oh yea, I hope joost brings some juicy merch next year
Everytime I hear or read brexit I think of this image :')
@scenic radish you never shared your stickers with @solar zealot
@lone dagger can we have tshirts? I only wear event shirts
what even is that?
@scenic radish 
I didn't want to brag 
Just wait for the merch store. 
wait there's merch?
BUT THAT'S WHY I SENT THEM TO YOU
Oh
In that case

just stickers I think?
I'll beta test it for you 
neat, I can put them in the same drawer as all the other stickers
@fathom sparrow is gonna get a box of stickers with glitter from me soon because he's an ass.
Oh hoooooooooorst
I have some of those
Sadly I don't
I got the top right one on my laptop
I do have a whole bunch of stickers from some sticker exchange point at an hackerfest
It's not my favorite event
I need a raccoon one of these!
welcome to the country that is stupid enough to be desperate to please daddy corporation and thus keeps giving away workers rights. ๐
Make it
yeah I keep underestimating how far behind labor laws are
just third world country things.
I'll bitch and moan about my taxable income but at least I have PTO
and your taxes probably give you actual benefits*
for SURE
instead of just.
"hey these are the war crimes we're gonna commit with your tax dollars."
how dare you poor.
That belongs to Nestle.
๐คฃ
yeah that is ALSO bizarre
something about grass and greener next door right?
more like
the "fuck you I got mine" generation got what they wanted and now fuck everyone after them.
Takes one to know one
You leave my PC hoarding out of this
time to expand this sucker and clean it up a bit...
sooo do you want an account on my HA to create this for me?
๐ฅบ ๐ ๐
I'm working on a way to make most modifications through css so you don't need to create as many .png layers. If it works out how I want it you basicly only need the base image... I hope...
I have to add 2 Lights and instead of just editing them into my photoshop file i'm doing the ADHD thing and going down a new rabbit hole lol
Think of the shareholders!
how else would I be able to buy another RS6
Bank robbery? ๐ค
Provided to YouTube by Amuseio AB
Nardo RS ยท DJEZJA ยท Rockywhereyoubeen
Nardo RS
โ DJEZJA under exclusive license to Amuseio AB
Released on: 2024-08-14
Producer: Rockywhereyoubeen
Mixer: Rockywhereyoubeen
Composer: Karim Fatheddine
Auto-generated by YouTube.
scam crypto bros.
Its a victimless crime.
https://youtu.be/YoRMZqv18po if you have 10 mins. I do not know how good the subs are lol
No fedposting!!! ๐คฃ ๐คฃ ๐คฃ
this is also why I don't want a black audi anymore lol
Found the source of the RAM shortage
F the shareholders!
Sometimes my subs in jellyfin go out of sync ๐ข
bazzar
running that but that does not solve the issue that if you pause the subs go out of sync
*sometimes
Are you a fudd
About eighteen months ago I asked everyone to help me figure out the best CPU for a media server. Your media server is only as good as the chip that powers it, so I wanted real data from real systems. Today I am excited to show you a brand new website that collects and displays all of your QuickSync benchmark results in one place. You can filter...
YAAAYYYYY I CANT BELIEVE IT, PIXELS OF SNOW!
THE SNOW IS A LIE
Actually its this guy.
sounds like he really wants his head on a pike tbh.
https://valenciapa.ws/@starsider/115673914127150304
Plenty of people is blaming "AI" in the abstract for the recent RAM price spikes, but I haven't seen anybody around here point to the actual and direct culprit of it all: Sam Altman secretly bought 40% of silicon wafers (not even produced RAM, just the silicon wafers) from two of the biggest RAM manufacturers, at the same time. Not even with specific plans for what kind of RAM do with them. This is just to mess up with competitors.
Seriously, you can't hate OpenAI enough.
153
115
Has anyone had this problem when trying to manual set up home assistant with google home??
you need a certificate.
time to setup local dns server stuff and etc and get a letsencrypt running.. ๐
The thing I'm really looking forward to is network switches costing another $2000.
Things we're running at work at the highest end have 64GB of RAM and 480GB SSD, so... RIP.
Thank you! Though I might not completely understand but Iโm going to try. Can I contact you if I run into any trouble?
It's probably DDR4
https://theprivatesmarthome.com/how-to/enable-https-using-lets-encrypt-in-home-assistant/
just find something on google; my setup is far too.. tinkering involved if you're coming here on this question ๐คทโโ๏ธ
But Arista neglected to include the kernel interface that dmidecode uses so I'm just guessing from the CPU model
yeah I think that most switch stuff is still DDR4
I don't even think that.. high-speed networking even touches ram these days I think its typically all ASIC/FPGA chips and shit
Depends if you're trying to stuff the entire internet routing table into it or not ๐
๐ yeah but if you're doing stuff that big you're not fretting over the ram cost
So just follow this and my problem should be fixed?
๐คทโโ๏ธ this isnt a support channel I'm just going off what I assume the problem is by that error. (I dont even know how exactly you're "adding" HA to google home.)
Don't worry though, this switch gets to be double-expensive by having Broadcom's "Jericho" ASIC, with 16GB of HBM (can't remember what generation of that, either) for packet buffers
any ASIC just quadruples the cost of shit
The shallow-buffer (Trident, Tomahawk) ones are quite reasonable by comparison, actually
the costs of purpose-built relatively-low-quantity chips.
you know what i wanted for my new home server build?
a damn pcie switch because the board doesnt have bifurcation
except.. all of those chips thanks to fucking broadcom cost like 150$ minimum for just the silicone
so there are basically no products that are cheap enough to consider.
the only one even slightly maybe worth it would maybe be uhh.. some NAS company makes a 10G nic that also has M2 slots on it
Ah yeah, that QNAP one
There are a couple of pretty low-end PCIe switch options from ASMedia and their ilk
Don't eat yellow snow
Which is what that will have; probably about an 8-port switch so it can serve the x2 NIC + two x1 SSDs over a x4 host connection, or something of that nature
Also what you get on low-end four-port 2.5Gb NICs you can buy on Amazon, just four single-port i226 controllers and the worst PCIe switch imaginable
Hey guys
I have never had a smart home before
Can I use a motion sensor by my door and it triggers when I walk in can it turn on my light
And then when I walk out can it turn it off when it sees me again
yeah but I want 16x into 8x 8x
which... is very niche apparently
Yes thatโs just the basic possibilities lol
if the switch is inside the room you can also just install a basic motion sensor light switch
might be cheaper for things like closets
I was just gonna get this motion sensor and put it behind the TV next to the door
So it just turns on when I walk in and off when I leave
Or is it worth buying a presense sensor for like double
It wonโt sense anything behind a TV
You need to have it visible
the way most motion sensors work is by detecting the heat from a person
unless you mean youโre angling it towards the door?
I'm gonna assume they meant pointing sideways out the gap between the TV and the wall
yeah I was overthinking I think lol
No I mean like it can't see the rest of the room but you can see the back of the tv from the door
If not I'll just put it on the ceiling above the door
Yeah that's it sorry
Yeah thatโll work
For what it's worth there is some sort of minimum angle that a PIR sensor needs in order to detect anything.
They are in essence a 1x2 pixel thermal camera, work by detecting differences in the relative heat measured by the two pixels
Presence sensors (mmWave) are useful for ultra precise detections where you cant angle it perfectly or capture a whole area
you can usually set boundaries and even positions that trigger it
and it goes through walls somewhat
All I want is for it to turn my office lights on when I walk in, the room is too small to be worth tracking
yeah a regular PIR sensor should be fine for that
PIR is a type of motion sensor
It stands for passive infrared
itโs what most motion sensors have been using for 20+ years
mmWave is newer tech thatโs more precise but also more expensive
the average off the shelf motion sensor is going to be PIR
mmWave sensors basically just entered the market a year or two ago
This is my basket
I already have matter lights that I can't control in the office, the other light is for my bedroom
I have 2 Alexa dots for the controlling
Ohhhhh, thank you
Do you have home assistant setup?
Not yet, I was just gonna run it off a laptop or something
And keep that plugged in 24/7
Ideally youโd use zigbee or zwave for battery powered devices
battery life will be miles better
I think the motion sensor is ZigBee
Ok so you need a zigbee stick then
I donโt think that matter one will work
I could be wrong though
It says it supports aqara ZigBee but only their own brand
Ah. Just get a universal zigbee stick if youโre planning on home assistant then
that way you arenโt locked into their brand
Ooo okay
Should I get ZigBee lights?
Whatever you want man. I canโt tell you what you need ๐
I didn't know they existed tbh ๐ญ
Iโd make a thread in #1284966353798697001
technically this channel isnโt for discussing this
this is more an off topic channel
I need some help understanding how an automation would work.
If I have primary trigger of "fan turns on" and it has a "for duration" of 30 minutes. And I also have a "And if" condition that the humidity be within a range. After 30 minutes and the humidity is too high, will it not do the thing? Will it do the thing when the humidity gets low enough or will it just never stop?
You'll want to make a post in #1284980040940912641
Done
Omg 0 repairs needed in home assistant
Acquired this nice fire hazard the other day. It's only rated for up to 10A. Most, if not all, circuits in the US that this would be used on have breakers that are at least 15A...
Oh and it also has four more outlets that aren't visible, and I confirmed it doesn't have a fuse either
(I got this for free so I'm not out any money or anything)
ive seen worse.. had a permanent six-outlet one scrweed to the wall in my childhood room
y'know just.
Excellent fucking ideas and etc..
3 per socket stuff.
This sorta amazing thing?
yeah
except of course it was very yellowed because it was fucking ancient
and half the plugs were some degree of blackened
barely any difference, but i've got it working using only css ๐
๐คฃ
it's about 50ms quicker lol
oh come on, US power is strange and terrible enough without someone making that.
Wait you haven't seen those before? Growing up we had one or two of those bad boys in that old yellow color, though ours weren't blackened around any plugs, probably were 10a breakers in that house though too
There's a whole category of horrors for you to gaze upon, should you so desire:
https://www.amazon.com/Cords-2C-Adapters-26-Multi-Outlets/b/?node=6396121011
Shop through a wide selection of Electrical cords, adapters, & outlets at Amazon.com. Free shipping and free returns on Prime eligible items.
Could almost turn this into a game for who can find the most horrifying item
nope, but then again... I am in the UK ๐
You need to drop some of those standards then, gotta get a little risk in life
btw, does it attach to both sockets or just one?
I stayed at a Airbnb that had a dehumidifier in a charcoal black outlet
Iirc both
the more I learn about US power setups the more dismayed I am...
this is probably the closest thing I have seen
I have one of those that also adds usb outlets etcโฆ. But only uses one receptacle instead of both ๐ซ
Liberia?
Yes lol
you leave my tube and knob out of this
We currently have a major argument about which way is the correct way for outlets to face. Nec code updated to flip them "upside down". This was to stop them from coming loose and stuff shorting between the legs
I remember reading something like that
my house is half and half because of when they finished the basement
how often does that happen to warrent a convo like this though. In reality, if your outlet is worn out to the point where things are falling out, replac eit
in my home if a plug is upside down it means that its a switched outlet since the builders were lazy and didn't wanna run overhead lights
And yet still no half-insulated phase/neutral pins, which would make that largely a non-issue.
I mean the design of the outlet would still suck donkey balls, but could be made less bad.
often enough that its burned a few houses down
not to be that guy
but a few
out of millions of outlets
its a terrible thing i get it, but changing code because someone refused to replace a plug just feeels a bit exessive
but moving forward in homes sure
I just find it a silly argument when being "upside down" is blantantly obvious to be safer
oh yeah
but there are so many conditions to be met for something like a fire to occur
I mean the real solution would be to.. not have the completley fucking idiotic plug style that we have
that doesnt have sheathing or safety plastic on the pins that can be exposed
but we're a very stupid fucking country so.. ๐
we also really love to work harden all the wires so if you have to do future work there's a good chance of shit breaking!
I mean absolutely but that shipped sailed a long time ago, we are in sunk cost fallacy at this point. Flipping them is a much easier code change and does largely fix the issue
other code to fix:
ban two prong extensions.
just ban them.
outright.
oh get this. My home is a newer home. 2010,
SOmething so funny to me is that they ran a cat 5e cable in the pantry for some reason but stapled it to a condit so I literally cannot use it
iirc the panel labeled that 5E cable "Alarm Panel"
no; what I meant by work hardening is stupid fucking wire nuts
You're telling me, I had to give up my govee heater because it could be turned on remotely. All the while I fixed it with IR.
the issue with extension cables is people don't understand not to plug things like heaters in them lol
I mean that makes sense. A lot of alarms, doorbells use ethernet as it is cheaper to buy 1 type then 2
I meant the two-prong non grounded extensions that people will use
the cable is unusable
and inevitably chop the ground-prevention part off to use them with ungrounded stuff.
its out of reach and stabled to condit
Also it's not just cheaper, it's WILDLY cheaper. 4-pair Cat5e is about half the price per metre of 2-pair Cat3 phone cable.
just punch a hole in the wall duh.. ๐
You mean pretty much every holiday extension cord on earth, shitty green ones.
Dude. My freaking house had CAT cable ran to my doorbell which was crazy to me. I was like fuck yeah PoE doorbell.
Wanna know what cable was run?
CAT 3
i mean..
thats really all you need for most poe.. ๐
the dream house is of course
either full conduit..
or a basement with full ceiling access
Wish we had this. We have two wire 18 gauge wire ran to our 2018 house doorbell
yet we have CAT6a included by the builder to basically every room - only a single port but still
Nice!
I don't think this is as big of a deal as people make it out to me. I'd rather have a POE turrent above the door with a much better camera then a doorbell
I picked up the 3090 (i5-10 16gb 512nvm) from a refurb place for about $150
Well the main issue right now is I want the new UniFi doorbell but itโs only PoE hahaha
And well I canโt run Poe to it now without ripping the drywall open
yeah I have a g4 pro wifi but I also have a turret above
I need to run my Poe doorbell about 70m ๐
I just settled with a Reolink WiFi doorbell for now
These are the I7 9500 with 8GB of ram but I'll like upgrade that when Ram returns to normal
or at least one of them is. The other might bet the I5
Lol so at our home they ran 2 5E cables and either 1 or 2 coax cables to every room
Theres another out building about 90m away and a well pump another 90m so running fiber lines
We usually only have a single CAT6E (CAT6A before it was official spec) and a single coax to each room
most of my devices are Wired thankfully
I was going to run cat6a but
I would like to run a camera out to my mailbox but its not far
like in the mailbox?
that would be a fun project
just under for LPR
Half an half here
LPR?
based unifi user
License plate reading
just moved my work to Unifi
Their new Liquid Glass mobile app seems botched lol
really? I haven't had an issue
wished they kept the labels on the bottom nav bar
oh yeah i think thats lame but
thatโs my only real complaint
oh whale
dude my work used to use Meraki, and we were paying $500 a month for an MSP.
I Came and basically told my boss if you give me the $500 a month additionally i will replace the MSP outright and be better in everyway
We don't need meraki for a site that uses 20 clients lmao
Upgraded the U6 Pros I had to these a couple of months ago
Is there any 40 amp smart switches with Ethernet rather than wifi? Bore well with 120m depth pulls hard at startup
Still need to get some 2.5gig or 10 gig switching though lol
very unlikely.
I got a U6 LR for like $20 on facebook and i've been chasing the same high since
Get a small smart relay, and a big non-smart contactor
maybe even $10
The XGS is why I am ok with wifi
Whys that
About to deploy a bunch of E7s and a U7 Pros Outdoor for a relativeโs house with 8 gig fiber ๐คฃ
The fiber is only $100/month normally Iโd tell him to downgrade
Because it'll do exactly what you want, without having to find a unicorn device.
Ah right thanks ๐
I only have 1 gig, I may get 3gig but its overkill. I can't saturate my wan often enough for it to be a problem
because the only high-power smart relay I'm aware of only came out very recently
and its only 25a/6000w
It doesn't draw 40 but it'll go well over 25
Yeah I feel like over 1 gig right now is definitely overkill for most
I have fucking Cox as my ISP and i hate them so much.
I hate them because they charge so much for internet
1 gb downlod and 100 upload for $100 and an additional 50 for no network cap
I hate them even more right now because i have to hope they win a lawsuit
Depending if i haven't run it for a week and it needs to pump water up 100m
Once its at ground level its fine
Yeah. He has 3 gig fiber right now for $100 through a local fiber ISP. The fiber co offering 8gbps is BrightSpeed
... sounds like that thing should've had a check valve somewhere.
fuck you
โค๏ธ
that makes me so mad lmao
Assuming you mean this? https://www.shelly.com/products/ogemray-25a-smart-relay
lol I wish I was that lucky to have two fiber companies offering service at my house
yep
Its got one but it has to allow itself to release
that is what I would upgrading to for 3gig
he was stuck with Comcast until a year ago with 1000/20 and unlimited data for $130/month
Otherwise ive got a 120m pipe full of water
whats worse is in my area its ONLY Cox.
that is not what a check valve is for... ๐ค
Heavy
and?
when its running its also heavy.. ๐คฃ
if the pipe isnt secured properly thats a different problem.
The check vavles on the surface. Doesn't allow backflow but the pump will empty if not run anyway
so its either pay high prices or use wireless solutions like starlink (which YUCK), TMO 5G which isn't bad but we game in our house so its a no there, or Dial up with century link
Its literally hung ๐
Cannot wait for google fiber to finally get deployed in my area
I may get a 5G backup but I canโt justify how expensive they are right now
I'll get a pic. I'm in the Thailand jungle so they do things a bit different
DO you have an iPhone or android?
iPhone
darn
I was gonna say if you had an android, you can use a USB C -> Ethernet adapter and use your hotspot as a WAN
Yeah I could always grab a cheap android phone but I worry about the battery bloating
Iโd rather just have a preset solution
sure
tmobile home backup
I have a spare line I can use
no sense in me paying money for service I donโt need
usb on a glnet travel router
still like $300 ๐
and I have AT&T Fiber at home so I really donโt have a warranted use for it haha. Itโs more of one of those wants
Not if you use the sim you already have, like $100
this was at the garage at work
Yeah T-Mobileโs network is impressive
Iโve gotten gigabit in the Gatlinburg TN mountains
Someone in my family is a first responder so we get T-Priority
which gives us the first time slice in the network so my data is always prioritized ;-)
I have employee discount still
They were using HughesNet for the house Internet
40 A OF POWER PRODUCT HIGHLIGHTS ย BETA RELEASE:ย ย You may need to update the firmware for this device, selected functionality or advanced features may not be available on your hub at the time of purchase On/off Z-Wave controlย for high power loads up to 40A, perfect for 240VAC heavy duty installations Power monitoring:
TMO employee? Or employeer discount?
I just used cellular thereโฆ
tmo
Nice. We have a 20% insider discount because we know a regional manager
ah nice
Paying like $176 for 6 unlimited lines
about to upgrade the whole familyโs phones for minimal cost also
I pay $18usd for 1gb/1gb
I don't think theres higher out here
Though can run multiple
Costco has a $100 shop gift card per phone trade in stacked with the $800 T-Mobile promotion on our plan. So we effectively get $900 off per phone
gonna get 2 17 pro maxes, a 17 pro and two 17s
lesson learned I spose.
... mind you I still don't pay attention because y'know.
dumb fucking zwave ๐


I'm lazy.
โ
โ