#the-water-cooler
1 messages · Page 181 of 1
This was the clip i was looking for, actually recorded by me and really proud to share
uhm. am I missing something simple, or is there no way for the home assistant app on an iphone to show me the list of bluetooth devices it is connected to? 🤔
its simple on android..
#1284965926336335993 might know
I put a post there.. now to wait for someone to come along and help 😛

Its so face palm inducing when I run into stuff my automations don't take into account 😛
for example, my garage door opened and my speakers alerted that I had come home.. though I was not home- I was out to dinner with my family. 🤔 Turns out that when I added my new tablet to HAOS it assigned it to my person entity - so it reported its location as "home" yet my cell phone reported as "away". they were "fighting" over where I was I guess 🤦 🤦
Do y’all do ear plugs or noise cancelling headphones? We do the latter to help my son because of similar reasons.
ear plugs work great for live music
I found out today that the statuses are case sensitive.
I use the little squishy foam ones
“feed the crows” didn’t trigger because the calendar status is “Feed the crows”. 
He really yeeted that thing haha
Even without over stimulation. Just for hearing protection^^
Those in ear yellow ones that construction people wear! Have also tried over ear ones on him
Fuck my ears, they have been dealing with loud music for well over 2 decades.
You spelt raccoons wrong as well, silly!
No the raccoons eat our trash if we don’t put it in the bin properly. They’re not around when the crows come.
I went to a couple loud concerts as well
but decided I prefer slightly muddier sound that doesn't hurt my ears 😂
I’m including the headphones I wear.
Like
Apple hates when I do

“This is awfully loud for so long”
I know, don’t care.
GUESS WHO'S DOING A HOTFIX RELEASE FROM THEIR HOOOOLIIIDAAAAY
I assume you don't put it in the bin properly then 😄
You feel most of the good stuff anyway 😉
Your boss?
^^ especially when I lurk right in front of the tower
Lmao on just a couple occasions. We forgot to take it to the can from the front door and they dragged the trash across the porch. 
Oh yes
I caught a big raccoon wandering through my back yard this morning. Must have climbed over my fence or dropped from a tree
Yeah I have no idea how they’re getting into my backyard.
They destroyed a foam board we had back there.
I love your patio area!
Needs some TLC, but I like it too
I raise you with moose
You can keep that, I like my car mostly dent free
I need cameras to see if I can catch bears or cougars on my streets.
A Møøse once bit my sister ... No realli! She was Karving her initials on the møøse with the sharpened end of an interspace tøøthbrush given her by Svenge - her brother-in-law - an Oslo dentist..
Seeing this is the high point of my day, tyvm
This was a couple years ago in our garden, the moose like the apples 😄
We still see the mum around, the 2 babies are no longer with her though
that's a big dog
AI moved to sweden?

Is this just how it is everywhere right now? The past couple days have been like 10 foot visibility because of the fog
Case of dog walking you?
twas pretty bad today
he's very fit for a 14 year old dog
Why do kids push on and kick the back of plane seats? I don't understand this behavior
They don't if they get properly yelled at
Talking full on meltdown
ehh, bring some duct tape
They have fortunately stopped. People with long legs that bump into the seat are one thing, but it seems like a kid needs to work at it
that's kinda what childhood is about
I'm pretty sure I never did anything annoying as a child
Kids kicking ok. Adults thumbing the touchscreen not ok.
I thought you fly those fancy suites in first 
Do you even notice other people doing things?
I wouldn't use my fingers on that dirty touchscreen. I use my tongue
Oh I notice everything from 43A when I do change flights 3 times back to back 🙂
Having long legs?
That is about a month I think
errrm, they mean month, right?
$255 on all of them or on each hobby per day?
working on it. sadly legs don't shrink later on
HA is a hobby?
Hobbies usually come with a budget. Just making sure.
Like collecting stamps
i need a system, where my mailbox thats made of metal, messages me in some way, if it detects my mailbox being opened
in an apartment complex.
yea, but why would it come with a budget?
step one, move.
Amazon mailbox sensor. The antenna pokes out the back to be outside
That flew right past you :-0
Yea, still confused 🤷
how long do you/can you go without checking mail?
La Palma on Netflix is like a crash course in Norwegian via a couple whose marriage is on the rocks
Informed delivery so months
€ based country so not certain about informed delivery 🙂
what's informed delivery..?
USPS website that shows you mail and packages mailed to you
Pictures of junk mail
Oh, i get that, only for dhl
but it doesnt Cover everything, and i got no easy way to check it. its its own app
oH I can prolly make a yelp integration with home assistant LLM. searching and booking restaurants using your voice.
not going to test a booking for sure!
NM not a free api
DHL are Donald's nephews, akshually
Dewey, Huey and Louie
Tick, Trick and Track here
Exactly
Yup, which is why I can go months.
I'd don't trust anything voice related for buying or booking things
But searching and send the link to your desktop?
Children?
90 minutes to this. I think its ok.
d) monochrome
E: short
F: pre global warming winter joy. Lets go.
There are two paths for me to make someone have a conversation with my voicemail to grant access or record a voicemail or gives my location.
Both paths have blocking bugs. 🚫 🐛
Looks like a pachinko game
It is, with the bonus of being able to knock small children down
Seems fair punishment for the seat kicking ankle biters
imagine how they kick you right in the back through the seat
and then sip some coke in your neck just before the movie starts
See this is why I built a home theater
Won't be kicking once they have plaster casts on 
of course the kicking will never stop during the whole movie and at one point you'll lose it 😄
I've removed a foot from my seat back several times now
with a machete?
chain saw, it's more efficient.
Not allowed on the plane, unfortunately
during a movie? EC chain saw with soft start I hope
on the plane it's easy, just book first class
First class children are the worst.
but they cannot kick your seat. you have those bed-seats, right? that can incline in many ways
no you see it's to make an example for the other kids
recline
They have someone to kick the seat for them.
He's not on emirates.
yeah but you also have someone to fight back you know
so the kid and you can sleep well
while your butlers are fighting
I'm not convinced yet.
yeah maybe just avoid planes, cinema ... in general places with humans 😄
Nah. Play global thermonuclear war.
is it cold rn where you are? 😄
It is.
Jorg, there are other ways than a thermonuclear war to get warm
Are Voice PE's already shipping? Or are they being released sometime in the near future? Anybody know?
First batch is already shipping
The map is weird. Sometimes my tracking icon is there, but most of the time it's missing
Is it supposed to be missing when at home?
Yes
to be honest I dont know why it dissapears, there's probably a WTH for that already
fire tv max has matter casting 😮 ? never heard of it
saw pics on facebook today of people getting them in the mail
all the 'look what i got for xmas' posts that made me super jelly 😭
jokes on them though, i got a $50 reolink camera
Aghhh I want mine haha
same, we'll get there haha
Definitely a UFO
The truth is up there
Would this be the place to ask for a bit of help lol my homeassistant yellow has decided to be a pain
I found something very cool: An RCA (with video) to AUX adaptor that came with a TCL TV
you can see the aux cable has more segments than a normal audio only aux cable
Nice, I've seen those with old digital cameras so you could output to a tv
Pretty common with new TVs. Figure they see it as saving the space six RCAs would take up, and only inconveniencing the 0.05% of people who actually use analogue input sources anyway
You usually get two (both with 4-pole TRRS 3.5mm jacks), one red/white/yellow for composite, one green/blue/red for YPbPr component video
Already received my order
U(stuck in a tree)O
We already purged them.
swift action, I like it
I currently run my HA on proxmox, and I'm looking to set up a test/dev instance, is the best approach to simply fire up a new proxmox VM?
If I want to test integrations like Google assistant/home, will I need a second nabu Casa subscription?
#1284966540617449515 can help.
And the HA Cloud subscription is for forwarding HA entities to Google Home - that is limited to one instance per subscription.
I have been watching this video and am a bit curious if there is any extension that gives a better idea/feel of the outside temperature? I am asking this more generally since I am not entirely sure what I am looking for. https://youtu.be/uXQLkQxJ904
Become a champion with 3M: https://bit.ly/3BBsBFs
The Fahrenheit versus Celsius debate has plagued the internet since the start... but what if it misses the whole point? In this video, Sabrina explores the invention of temperature, learns how other meteorological metrics impact how we feel in the heat (or cold), and finally learns how to dress f...
Maybe something that tells me if I should grab an umbrella, or a coat?
Right but I was thinking more of an icon etc rather than me asking.
Also it is never safe in Amsterdam. You will get run over... By cyclists. 😛
Never happened to me.
*tourists get run over
Oh lol I feel this one
when working from home my whole sense of what to wear outside is borked
But I am also the type that just wears polos in winter casually
Me too. My main thing really is not being over dressed for summer or forget taking an umbrella.
I have a belief that I have god like powers. Or rather my umbrella does. If I take it with me it will not rain. If not, it probably will. 😄
It does NOT count if you are the one running people over. 😄
I suppose you do not notice them. 😄
Yea, I just go by season
when I start being cold with a tshirt consistently, I add a sweater
In dutch we call this bonus punten
like the professional cyclists are worth double
If you run over 100 people, do you get 1UP?
One way to find out
Yeah i did that too yesterday ahahah
Hahaha
you get the prestiguous award of being american
My dad still uses feet and inches, it is painful
3 inch 8 screws
Like
You should encourage him to use gumballs instead.
He is British 😄
using freedom units maximizes your freedom. didn't you know?
It is also good mental arithmatic for me
My condolences
2.54cm to the inch
British Imperial is different from US Customary Unit Measurements USCUM. 😛
br*ish 🤢
I am also British
So if you don't want som fisticuffs in the garden, you should probably knock it off

BARE KNUCKLE FIGHTIN INT GARDEN
Where's your garden?
Shouldn't you use the metric system to your advantage? 🙂
ah yes, the fighting style differences based on units of measurement 
granted, the old German ones would actually work reasonably well for that
ohh, cubit is Elle. Good to know
By the time you measure your weapon the other side will be deeply lost in calculation. You will have time and the element of surprise on your side.
I can't let anyone know my secrets
I know that it's 2.30m though. No need to measure
you prefer 7.6cm screw?
All you need to ask him how many inches is a yard and by the time he is done, you would be long gone. 😄
Only if you are using 1 decimal place
It would probably be a 4.2x80mm screw over here
yea, screws with a 42 in the name are clearly superior
I will admit the use of decimal mm for the "8" or the "10" isn't optimal, but the rest of it is far easier, especially when you are running into say a bit of wood that is 2 inches and 25/32nds deep and you are trying to work out how many 32nds you need to plane off
But your tape measure is in 16ths or some messed up shit
Why not use a 40mm screw like a normal person?
But if you grow up with it, I understand
My dad is an engineer, so he thinks in thousands of an inch
I do not think I grew up. Just gotten older so no problems there.
I tried this but my wood kept falling off, until I realised it was more than 40mm thick
stop using metric wood with imperial hardware or vice versa and you won't run into those issues lol
50mm screw then. 😄
You mean stop having my dad around when I am using all metric stuff? Got it 😄
I have to work with 0.258mm pitch in EE thanks to american standards
yea clearly it's too hard lol
Condolences
EE?
Electrical engineering
Oh that.
one of those professions soon to be replaced by AI 
I wish you good luck with that 🤣
thx
AI. There is a dip in net voltage. Do you want to sell the watt in your battery?
let me hallucinate some free energy first
\o/ made my 1st money with home assistant.
Nice. How did you do that? Bug bounty?
some apple user had a lenovo mini pc and wanted to migrate from a raspberry pi
on facebook
recommended proxmox because he wants frigate he has out door cameras.
install cant go because he cant connect a monitor to the new pc
but we walked trough the whole process he should be find.
was happy asked if i had paypall
my order went through before they listed sold out. Stayed in unfulfilled. I contacted them and they said the same about not getting it until january because they "sold out 4 minutes before".
That's the LAST thing I buy from Ameridroid.
Not yet.
door dasher appears to be driving 90mph
how dare they make you wait for food so long 😮
I heard that happens if you order from sonic
you dont hear sonic comming.
Oh FFS! Just finished sending them a barely polite email looking for an actual update, hope to hell I don't get the same response. If don't get it early January it's likely to sit on a shelf until late fall when I'll have time again to spend with it.
Why is this page suddenly only available on internet archive?
Once you have a sensor that can detect you are in bed you will wonder how you automated without it. I use it to turn everything off, turn on my bedside lamp, arm the alarm in perimeter mode, and put my announcements in “do not disturb mode”. When I get up it disarms the alarm and plays my morning announcements. Unfortunately finding a reliable ...
404 page not found
tom deleted it 8 hours ago
yeah, just noticed that
(1/6 of 8" square serving)
the fuck is this unit? (/me looking up calories of some food)
That’s dumb af.
That’s way too much fraction math wtf.
ONGY IT’S TOO EARLY FOR THIS FOR ME
20 bucks for biscuits and gravy that you vaguely remember once tasted good
welcome to the future
I'm still hungry
I guess I need to make myself some breakfast, since evidently I'm not getting anything from Missy
damn I wish my english was good enough to understand the daily quest. Well, so just a normal day.
to be honest don't you think life will get an upgrade when you really can gamify it? Daily quests with real rewards etc.?
Tbf I had my local llm write these messages for me.
Partnership Quests ... and if you both got enough points: 7 days carribean holiday
Lmao sorry the peanuts weren’t enough.
Shitpost aside, it’s actually really good to do non-food rewards for task completion for anyone.
yeah, but now make it sentiente and gamify your life with cool quests 😄
"You did very well, Missy! Good job!! Let me pet you"
that'd be nice if I had an AI saying that to me
I could even 3d print a hand on a servo to pet me
I told my husband I’d do some positive affirmations after the bill tasks are completed.
“That was awful, but it’s done now!”
yeah, but add the lipsync AI waifu / or menfu appearing in your vision
uwu uwu
I dunno if were there yet lmao.
I don’t have a screen for the cute waifu images to come up yet.
it's close though
But my automation is slowly being built in preparation for rewards.
tbh what I want is an AI that remembers everything we talk and can guide me through life with quests
Just haven’t figured out how yet.
Omg the memory you’d need for this lmfao
it could even do the heavy burdon of chatting on discord and let me do actual work / quests
I would feed it memory regularly, don't worry.
we need hot swappable memory tbh ... we can't turn off the machine once it's running
don't run it bare metal and make sure you are set up for VM live migration
Yay the ha voice's are here and the Google Home is deleted and the old speakers reset to factory.
damn this IT folks always have a solution ready 😄
what is up with notebooks not having usb c charging these days
what are the bluds at hp, acer and dell smoking
it for sure isnt well for them
Apple ahead of the times, as usual 🙂
my old HP had usb C charging
this now seems to be an exclusive feature above 1000$ again
They were killed in the press when the MacBook Air came out with USB charging
now everything has received increasingly fragile barrel plugs
they look like headphone ones
Really?! I kinda thought the whole point was a single cable to charge and dock
That is crap
lenovo does it down to the cheapest ideapad from what i can tell
but they have breaking hinges
:^)
EU regulation for USB-C charging applies from 2026 for laptops
I just replaced a few accessories that used microUSB with USB-C versions
Cheap stuff still often goes micro
But it's slowly changing
no 1
it's been at least 6 years since I've bought anything with micro
consumer stuff that is, DIY stuff still has micro often
One year in a few days.
I have a borescope that's still micro. Stuff like that
if it wasn't for EU you would still have shitty lightning ports on the latest iphone lol
be smarter than that, dont buy iphones 
Probably
alright a flex 5 it is
Good afternoon! Does anyone here know if HA is able to configure iOS notifications with different icons? I'm referring to the spot where the app icon normally goes rather than attaching an image. The images show up on the right, I'm looking to have an image or icon show up on the left behind the HA app icon, similar to how Snapchat places a user's avatar in this picture https://i.redd.it/8dh058m4gl1a1.jpg
I'm bit rusty to remember. Is it ok to have 1 coordinator to use zha and z2m at the same time?
Usually no. Only network connected coordinators can serve multiple integrations.
Ok after some hours with the voice assistant hardware I can say that they have to improve the speaker. The quality is pretty crappy even for voice command answers. Second there must be an option to disable the led stuff. In daily usage it feels just cheap. And from a hardware point of view they have to improve the industrial design. It looks and feels like a toy. Side by side with a simple home mini it looks and feels cheap.
But I'm stoked that there is finally a official hardware device.
I figured as much. so 1 coordinator for each
Do you have proxmox?
No
ah thanks.
(Zigbee ESP32 GW to work with Z2MQTT) I made a post as I am baffled on why is z2m basically.....shutting down and boot back up. I'm not sure what's causing it to become unresponsive. I currently have Mqtt broker within HAOS (as it resides in proxmox) So I'm not sure where to look on what's causing it to shut down
I’m happy to see you’re liking it for the most part! A couple of things.
We clearly call out the speaker is not quality and you should use the aux port to connect a speaker if you want something better.
You can turn off the LED, it’s under configuration on the device page.
We also released the 3D files for the case so anyone with a 3D printer can make their own. That’s not an everyone thing though.
For me that switch doesn't turn it completely off. If I want the LEDs to mostly be off, I set the brightness to 1%.
Also an option.
I bet you could even take over the device with ESPHome and turn it off if you’re so inclined.
I guess, but compiling voice firmware on a HA Yellow isn't what I would describe as "pleasant" 
We know it’s not ready for mainstream users. 😊
Will it in the future be able to relay sound from the voice PE by other means than 3.5mm? Ikea Sonos for example hasn't got an input
I doubt it personally but I’m also not the technical person who could answer it properly. That might need to be a script thing…
I think we answered it on stream but I’ve forgot already.
😂
Would be nice to be able to choose a media player as output on the device page
Absolutely agree!
The Music Assistant integration allows to transfer queues to another MA media player.
so i know tuya has a bad rep, but is there anything wrong with them if your only wanting super simple functionality?
like i found a set of motorized blinds by tuya thats not very expensive, all i want is up/down
It probably still is a hit or miss if it works and if it keeps working
Yes my 1st happy home assistant customer
Now you're responsible for them until they turn 18
He has a beard
they get old so quick
But does that imply that the rest is angry, or is this the first one
100% happy rating
I recommend proxmox but he felt more save with just haos. Well. Is you ask we turn a saying in english?
@lone dagger Yeah well I know that it is advertised like that. But the speakers have to be better in a v2 product. No one wants to add an additional speaker on multiple satellites. They have to sound decent. My wife already hates the distorted crappy sound. With the led ring I meant to have it completely off. Perhaps just a soft feedback while listening but right now on default it looks like a cheap toy that shoots the Leda in your face. Especially when using it in the dark.
And by the way this should not be criticism. I love the voice pipeline especially when adding gemini or open Ai to the mix.
I assume adding high quality stereo sound to it would sky rocket the price. The Nest and Echo speakers are subsidized by Google and Amazon.
you'd look at Sonos before they went bad pricing.
Every single one of my Sonos devices was bought on sale, open-box, or otherwise discounted. Lessens the pain, somewhat
I actually got 2 of those era 500 speakers last week
were in the sale and I quite like my sonos roam
hardly use the app
I still have OG Play:5 speakers that only support the S1 software, honestly by all accounts it looks like the experience with the discontinued version is better than the one they keep fucking about with
I have a roaming raspberry pi with bluetooth speaker as mobile music system.
Control with home assistant ofc
OK, so this account started following me on github today, https://github.com/thegithubmenace do they get paid per repo or something? Or did a bot get loose and just start creating hello worlds as fast as it could?
oh look
Seems like some sort of spam advertising
Well we know he isn't following me due to my programming skills...
Just reported them lol
anyone know if you can mix and match TP-link mesh routers?
im trying to create one giant meshed network between the various buildings on the family farm/housing
#the-workshop might be able to help
Not sure you’ve heard/saw but we don’t have a v2 currently planned.
Subsidized by <company> = you’re the product
The one thing I use my Echo devices for is music, so believe me when I say I wish the speaker were better.
It doesn't matter what you do, people will always get funny ideas about what they want the product to be
I just naturally assumed Echo Dot / Nest Mini replacement; which for me personally is a device to set kitchen timers on while my hands are dirty, yell at to change the aircon temperature, and not a whole lot else
Might do ok to listen to the radio, but I'd never have dreamed of playing music on it
Yeah we use our Echos for timers, the weather, and music. It’s shitty for all of those on random occasions.
Oh and one Dot is used as a noise machine and news so that one is harder to replace with the VPE.
Google really struggles with my accent
Regional accent not covered?
News: Bleak, good luck!
More likely I just talk funny 🤷♂️
My sister likes the CNN recap stuff.
So do I. I was raised in Colorado, with a Liverpudlian and NE people in my life. I say a lot of things weird.
I get the most shit for “milk”.
The news one I am struggling with. I have an automation, which uses Google Assistant and a Nest speaker to play news, when I start to brush my teeth. Some of those news are available on Spotify and Tune-in - but Music Assistant doesn't show podcasts. 
If my cook with home assistant isnt going to be a successfully project. Perhaps searching for an restaurant.
I have a php script that redirects to the latest podcast based on a rss feed. I think you can add the php script as location in Mass
Updated my zigbee plugs.
Forgetting that it would turn off the power to my PC that hosts my LLM. 
@lone dagger never tought you where so paranoid having a LLM kill switch
I was in the middle of having a conversation with it, too.
lost forever
Maybe someone here can answer this one quickly - what is the difference in this syntax?
neither is legible english so no difference
And that's about as quick an answer as you are going to get here. Try a relevant support channel.
whats that with peeps not running there updates
One has parentheses.
To be perfectly blunt
Fuck Windows. They’re actively anti-consumer.
I’m using this because it’s the only the device in the house that can run what I want, I don’t need W11 updates to do that. Updates often mean that I have to turn off 3-10 things they decided to enable again. It’s just so bothersome.
Windows, the OS of infinite updates, one after the other after the other after the other...
speaking of, I probably should update my Parallels Windows install
like my debian hasnt that.
there are always updates. unless you wait and things get broken.
It's the infinite stream of check, update everything, reboot, check, update everything, reboot, check, update everything until you get tired of it and go to sleep
your just use to the non LTS version of linux
like my biporal girl friend who did not update her kubuntu and now the version dropped support
O yea. ofc my hour windows update. I do that every monday write my hours (1 hour) no one ever complained
vacation.
I sometimes forget windows exists... and things like that
@forest edge isn't it fun to make snow as an when you need it. 🤣
look at all that PFAS
65 and boardin
looks sad
Thought of you today while I got a pedicure.
wonder if the people on the ski lift go over the non snow covered areas if they get scared lol
Monday for me.
Lol a japanese working in korea disfiend me on boo friend/dating app after i mentioned i work parttime
No idea. Here for double mezcal Mary with some friends
Got builder gel nails that look like opals today.
The photo doesn’t do it justice.
V8 with celery sticks?
Always.
i've had a cold for the past few days unlike any other
least thats what the doc called it
Square and round shapes haven’t really been my thing. 😆
Ah. I like them squares you know.
Yep squares add a touch of geometrical sophistication 😁
it's 2 am. Just finished my lamb t-bone steak. Was worth it.
I feel a bit animalic as well now
you know when it flips and you realize you have to eat with your bare hands?
So, I have a question.. or maybe a comment? Is it just me? Or does it seem impossible to get support in the discord server anymore? I remember when I would get a response in hours, or less (I think once on Christmas day like this time).. I have had a topic open for 3 days, and no peep.. And this is the second time it has happened, I have had to take my help requests to shiver reddit. And within hours in Reddit, people will all over it..
This isn't a paid support place, if people don't have a sensible answer or solution to your problem they might not answer
Well, I can't beleive that what I needed is even remotely the slightest bit complicated.. Delay a node red flow by a time set in a input number helper.. This can't be that complicated.. But this has turned out to be the MOST difficult problem to resolve for me..
Unless... Is Home Assistant designed about things happening now, not sceduled?
Node Red 🤮
Well, I have ye to find a better solution to perform some of the complex and complicated automations I have in my home. I am open to any suggestions, but when we have ana automation that is "Do this if this, unbless this, but if you do this, you have to check this first, and if that is more then this wait 5 min, but if it isn't wait a number of min depending on what this other thing is set to, and all of this only under this condision."
you can do that with normal automations
I have not yet figures out how other than to call another automation, after another automation. Meaning your right. Not not visual. When I need to change something, it would take me forever to find it. In node red, everything is right there. Except Node Red can't seem to wait for N seconds!
You just setup all of those things as triggers, with a trigger id configured for each. Then you use a choose action where each choice uses a trigger id as a condition plus anything else you want to add. #1284980040940912641 can definitely help if you ask about doing this.
Those, are all set up. I have automations that contain not less then 30 or 40 nodes.. All done. Took less time to set up then "Wait N seconds" in node red.
🤷🏻
I likely have well over 10 hours invested in "Wait N seconds" Its nuts!
time to invest another 10 reverting away from node red lol
Node red hater gang here lol
lol. No, I used to use the automations in HA, but for me its not visual enough... I need to be able to see clearly what is going on in some of the more complex automations I have. And untill HA itself provides an easy way to visualize it... But we all have our preferences. 🙂
using trace visualizes it
Anyway #1284980040940912641 , To get actual support.
Ahh, okay. The last message in the old Node Red channel says to go to Related Tech #node-red-archived message
If Automations is the correct place, perhaps someone should correct that..
I’ll pass that along
Oh that’s my bad. I keep meaning to update it but I think it’s written down on a list I keep deprioritizing.
Someone will remember to remind me to do this the first week of January when I’m back working, I’m sure. 
Or.. Just an idea.. Since you have noticed and have proof it causes issues... Just saying.. lol..
Nah, it’s a little more complicated than that. It’s not the only thing that’s moved.
I have to rewrite it.
And I won’t spend my vacation doing that. ☺️
Fair enough. Enjoy your vacation.
I'm really impressed by the evolution of home assistant. Long live HA!
fog here is absolutely nuts but damn it is nice to breathe outside lol
I think I am denied access to my HA again because the certificate expired.
Not sure what more I can do to keep that thing up to date.
It also does not make sense to prevent connections of any kind at all just because the certificate is gone.
But that's your browsers fault
What are you using for certificates
Weggat it is. 😛 Let's Encrypt addon which is typically off. Not sure how to keep it always on.
Why is it off
I am unsure, it turns itself off even after I manually start it.
You are probably right though. That it is a browser problem.
Some TLDs also have HSTS enabled by default and are required to have a certificate
No logs?
Logs for what?
The let’s encrypt addon
I do not see anything weird there thouh the log seems to be wiped since last reboot which was a few minues ago.
I can post what I have though, one sec.
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
My belief is that this should be running all the time to update the certificate as needed.
Yes it should. But the addon should have logs showing you why it’s not. #1284965172053807145 is a good place to take this. There isn’t supposed to be support here.
Sure, posted. I have presented the logs too. I do not read anything of significance. But you can answer in the proper thread if you wish. 🙂
Just think of all the mischief the raccoons are getting up to that you can't see
you can see the water droplets floating in the air.. the only mischief they would be getting up to is a wet n slide
Buy them a lighthouse
I think this is the proper place to find out, how I can make a patch and get some support for having it included in one of the upcoming releases. It is front-end related and the goal is to have the hardcoded "Roboto" font removed and replaced by the standard CSS variables, so it will be easier to have a custom font HA-wide applied. Whats the proper way to get started, or get some sort of agreement that something like this is going to be accepted at all?
why? so they could lick the glass dirty thus making it's purpose hindered if not down right useless?
So the raccoon navy that is clearing up ocean garbage doesn't run a ground
@solar zealot posted in memes earler
I never look in those other channels unless I get tagged lol
But thwre might be raccoon stuff in there! You monster
in the #the-kitchen i'm sure there is lol Racoon Shish Kabobs
Not all who wander are lost. You are though. Read the channel description. Try asking here https://github.com/home-assistant/frontend/discussions
2025 and we still don't have atomic batteries in everything
Would be nice if WearOS server address could be updated from the Android HA app instead of requiring a full log out and log back in.
do you want to be kicked by elmo
or are you an elmo wanting to be kicked?
Hi guys!
I'm completly new, terminal has been set up few hours ago.
I would like to start with HA configuration but before begin I have one question.
I have got vacuum machine, Roborock S5 MAX, normaly I used app Xiaomi Home to connect with Roborock S5 and set up vacuum in correct way.
How it works ?
Do I still need app Xiaomi Home? or connecting vacuum via Sonoff Zigbee 3.0 USB Dongle Plus is enough and app Xiaomi Home is not needed anymore ?
I'm asking this question because I have a router with "Easy Mesh" solution, WiFi 2.4G and 5G are together in one WiFI network, I would like to keep it.
but I have a problem with connect smart devices because of smart devices required 2.4G...
There’s no support here - only chill. Come in, grab a drink, chat with your fellow community members! This is a space to talk to other smart home enthusiasts. If you’re looking for support and unsure where to go, check out https://discord.com/channels/330944238910963714/1284968640189304913 - it should help you find where you are going. No politics, religion, or any other obviously contentious topics! Please ensure you've read the Code of Conduct (https://www.home-assistant.io/code_of_conduct/), and #rules.
We were promised Mr. Fusion a good 10 years ago
That's something for #1284966353798697001
there is not really any point... no one ever answers the threads
That's wrong. Most threads have responses. And not every question has an answer available.
It's not related to hardware, this is more as general question
I dont care about this specific hardware, I would like to understand how it works in general
Your question was specifically about the Roborock vacuum.
nope, Roborock was just example
I would like to understand if I still need extra apps for specific devices
or HA is all what I need ?
https://store.steampowered.com/app/494840/UBOAT/
Yeah thats my christmas vacation sorted for sure
UBOATUBOAT is a simulator of a submarine from WWII era, yet different than all you have seen so far. It is a survival sandbox with crew management mechanics while its primary theme is life of German sailors. The boat is their home, but it can become their grave at any time.In UBOAT you control the crew in order to control the boat. You look afte...
$8.99
20556
Time to uninstall node red
https://community.home-assistant.io/t/fsr-the-best-bed-occupancy-sensor/365795
What's with a great guide getting deleted and then put back up with a disclaimer so a user can sell a pricy product with the same exact function as the guide?
Its very misleading for new users for a moderator to be putting that note in. seems like a blantant cash grab.
Seems like this post only went back up because it got posted to reddit and people noticed. Not good at all. Absolutely not in the spirit of the community. This is an opensource esphome device. Deleting a guide so you can charge $54 for the exact same thing is absolutely not okay
EDIT: This is no longer the best bed presense sensor, see: Bed Presence for ESPHome by Elevated Sensors instead. This topic is closed and no longer supported. Once you have a sensor that can detect you are in bed you will wonder how you automated without it. I use it to turn everything off, turn on my bedside lamp, arm the alarm in perimeter mo...
Why else would the post be totally removed until it was mentioned, now with a new disclaimer saying to buy a $54 dollar product and that an $11 DIY esphome sensor tested by dozens is now "unsupported"
Its an HA moderators post
Its one thing to say "hey we have this polished product for this use case" vs HA staff calling a community project unsupported and directly linking tp a consumer product. Highly misleading
If an author of a guide deems it outdated and/or does not want to provide support for it anymore, it is unsupported (the guide, not the hardware).
So a moderator can uitilize the community for two years to design and develop their product over 2 years and then delete the thread when they release their own identical product? Is that what this community is for, free labor for businesses? That thread had massive collaboration from the community.
There is no product - it is a DIY guide.
And no one charges anything, just an alternative off-the-shelf solution to product deemed well enough was given.
Did you read the disclaimer up top?
EDIT: This is no longer the best bed presense sensor, see: Bed Presence for ESPHome by Elevated Sensors 48 instead. This topic is closed and no longer supported.
It links to a consumer product and previously the thread was deleted until today when people noticed
Its not a guide, it links to a $54 dollar prebuilt identical sensor to the guide
Heavily implying the guide doesn't work
The author of the old DIY guide has not provided any product for sale. He stopped supporting that DIY guide and linked to an off-the-shelf solution, he deems to be better. I see no malintent. Nobody stops you to build the DIY thing - you just don't get support for that guide anymore.
🍿
FWIW, I enjoy having the option to purchase sensors
Whether it was the best choice to lock the old thread 🤷
But selling something readily available to everyone by itself doesn't prevent others from following the guide
I also very much enjoy the option to purchase sensors. The issue here is the deleting of a community effort and framing it as the only option.
And as already mentioned:
This topic is closed and no longer supported.
Meaning the topic (DIY guide) is no longer supported.
Calling it "no longer the best bed sensor" is obviously loaded and highly misleading when its the same sensor
I see no honest reason for saying that

you're seeing a conspiracy here where none exists
the thread is back up, enjoy it
just don't ask Tom any questions about it, as he doesn't want to support it anymore (as is his right)
It's not a conspiracy accusation. My point is that so if I start a thread on a topic, I now monopolize that topic and in 3 years can delete all evidence to support my business? Is that really in the spirit of the community?
Whether there was intent by the poster, that is what happened even if its not his product, and by this logic it would be permissible if it was his website and product
It's not his business!!!
Again... there is no business in that topic 
that is your conspiracy
I stated it is not his business. It is another users business in the thread
anyway, you complained about it being deleted, I brought it up with Tom, he restored it. Enjoy it
And yes, a business is listed. Please click the link in the update
This is my point
If I post a link to an Aqara sensor I like, am I suddenly in business with Aqara? Do I get shares for it?
Even if it isn't his business, it sounds like what I am describing is permissible behavior
If aquara posted a thread on x sensor 3 years ago, hundreds of community members supported the supposedly open project, and then they deleted the thread when launching their product that would be dishonest, yes
Well... to make it short: that might be yours, but we do not share that opinion.
do they have an affiliate program? I know they sell on amazon
It seems like you have a completely misunderstanding of what I'm saying
Or you are over-dramatizing it.
This a crowdsourced development issue. A tale in the open source community as old as time

-# A wild Missy appears
He did not delete a community effort. He deleted his own guide that he no longer has time or patience to help people out with. He’s totally able to do that, it’s his content.
Expecting someone to forever give their life and support for an open source project they don’t maintain is pretty outlandish. He pointed to a better guide for something that’s being maintained right now.
My actionable notifications for chores is working quite well. 
My husband keeps tapping the notifications instead of long press, though, so I asked Bruno how to set up a URL in the action to go to something specific in HA instead of just opening the app. 
Working setting up the habits of the people you share your house with is really the most time consuming part of everything. 
I don't have any issues with that
You live alone, Joost.
I can recommend that! My HAF will never be this high again!
the best way to deal with user complaints is to get rid of the users
This is why so many in the community are like “HAF DOESN’T MATTER”.
Can tell they’ve never had an annoying partner or child making them change every little thing built. 
yea, designing for the DAU 
I don’t mind it, really.
It’s just the part where people are asking for things that are more complicated than I know so it’s really slow to build.
Some kind of "Squid Game" for the users in your home
you can either evolve your home to fit its users, or evolve the users to fit the home
finally just got around to watch this before the next season released. was actually not too bad
I just started the second season.
my parents complained about HA not working 100% of the time. So I moved out, issue solved
I'm going to a different home and taking my HA with me!
Has anyone seen someone else do a custom animation on their dashboard, like confetti on the screen when triggered by something else?
I think I have a path I am going to chase down here....
I'm was just kidding, I manage 2 HA installs now and the one at my parents runs fine
that's where I do all my energy stuff because they have solar panels...
Was literally just talking to my sister about doing something similar for her. I have a feeling that whenever we no longer live together, I will be maintaining her home instance.
yeaa, not being motivated to do exactly that is the reason I let my mom be happy with Alexa instead of getting her on HA
I think it's a little different when you are living in it and leave the automations, though.
I dunno, it's really easy to get into a small consulting gig within HA.
This doesn’t seem like a quick question. If you create a thread in #1284965988642590891 People will help you if they know how.
i've seen several people who do this as a paid side gig. Pretty cool IMO
Gonna charge your sister, eh?
lol no but I was telling my husband yesterday that there’s a desire within the community for those types of consultants and that he should learn yaml. 
And it was decided that as long as the consultant wasn’t charging for HA itself all is good? Just services and/or hardware sold
Yep, pretty much.
Can’t stop people in all reality but we can destroy their rep in the community.
So it’s really not in their best interest lol.
That sounds way more evil than it is. 
I have 3 things I’m using as a way to procrastinate writing more of this Tuya guide.
It’s impressive actually…

step 1: throw away.
step 2: repeat step 1.
Step 1: Ooh, my automation notifications have me at a point where I can start setting up displays around the house. Let's look for epaper displays!
Step 2: Need to put in a URL for my actionable notifications to accommodate my husband's behaviors.
Step 3: Rearrange the wall behind me again.
I've been jumping around these instead of writing the guide. 
I still need to clean my office so I can reasonable have someone help me hang up new shelves 😂
You can combine two. Rearrange the wall with lots of (color) epaper displays. Adaptable background for every opportunity. Raindeer for Christmas, bunnies for Easter and so on.
.....
What about those light curtains instead?
An upgrade to my fairy lights.

Hang on, I found a great example last week.
/rename Missy (Holiday Mode) > Squirrel Missy
And by last week I mean Christmas Day. https://youtu.be/PX3zjsN9TOQ
We got our WLED-friend PCBs (https://blog.adafruit.com/2024/12/02/leftovers-layout-wled-board-revision-a-completed/) and are testing it with various LED grids. First, we tried out a 16x16 NeoPixel grid that runs on 5V. Since that worked well, we're now onto a much bigger 60 x 60 grid - that's 3,600 LEDs! These are some NeoPixel pebble (https://...
LPT: For whenever you have important things to do, keep a stock of 2-3 unimportant hobby tasks you have been postponing since forever.
Then, you do the actually important thing in procrastination of those tasks 🙂
lmao me when writing thesis
usually it works the other way around for me
I do all the things I've pushed out instead of the one important thing...
Then your hate-doing-this scale is backwards 😅
Mine currently is cleaning out the 3d printer resin vat.
Whenever I want to finally do that, I end up doing laundry, dusting the house, doing dishes, etc.
I need this, so many ideas...
did you finally finish it?
in june already
It looks so fun. 🤩
Welp, Step 1 is at a stopping point now.
The ultimate procrastination automation?
The automation is to run an automation, thats only purpose is to turn the automation off
Small is subjective?
I bought the items Madelena suggested here. https://community.home-assistant.io/t/use-esphome-with-e-ink-displays-to-blend-in-with-your-home-decor/435428
Weatherman Dashboard for ESPHome I have multiple dashboards around my apartment and they display different information depending on the context. Since this is placed near the front door, it contains concise information for what’s outside with a homey style to match the rest of the wall. This is part of the ecosystem for my Home Assistant c...
Oh, e ink
Hey all. I don't suppose anyone knows the url to connect zwavejsui to HA via the integration? I tried everything and it says cannot connect
So a usb power and a wifi connection? That is absolutely sick
I was looking at them anyway, but couldn't find what else I needed for the displays. Found that handy guide by Madelena.
I bought 3 sets, lmao.

I qould like my dashboard to have colour and fast display refresh (camera streams) but I can see a use for eink displays for general at a glance monitoring
ws://a0d7b954-zwavejs2mqtt:3000 if you mean the add-on. If that does not work, open a thread in #1284966617670881350 with the "Z-Wave" tag.
I subscribe to both " the house should take care of itself" as well as "monitor everything" 😄
Yeah, these aren't for cameras. These are for low powered access to tasks in HA for those who don't need everything the app has.
I should grab myself some esps and go to town tbh
Will probably need to do some button stuff to accommodate for no touchscreen. 
Thank you for the reminder about those displays, I saw the post a while back and it had slipped my mind@lone dagger
Ohh I tried that. But I did not use the addon. Running the zwavejsui on a different PC
IKEA discontinued the RIBBA frames here.
Eh, I can make my own frames, I was more worried about the hardware that was needed.
The hardest part for me is always "I want to do this thing but nothing really tells me what pieces of hardware I need."
And that's how you end up with tuya bulbs
That's what I get for listening to Bill.
You made the mistake twice
I will never again.
This comes in various forms; it's generally one of a small selection:
- Here are the 90 different pieces you need to buy, hope you're good at soldering
- This is the easy to assemble version, and 60% of the time it works every time
- I solved my problem by spending $$$$$$ on <pre-packaged solution> that does 98% of what I want, but took zero effort

It's so true. 😭
That's basically Home Assistant in a nutshell, lmfao.
In some ways it's great though; there are solutions both for people with 3 time and 1 money, and people with 1 time and 3 money
you forgot "This is obviously junk, but I am getting big bucks from my sponsor"
I only have 18, is that enough?
18 moneys?
18 money
Sorry, not used to your weird Dutch shit.
Well that just raises more questions
I tend to have that effect
how many tuya bulbs does that buy?
The replacement is "sannahed"
But probably different sizes, just to piss everyone off
I needed some more 50x70 ribbas for my "best looking garbage cans" exibition
All my frames are RIBBAs. I'm not keen on mixing different ones.
does anyone know how to make a button that when you click it, it disappears?
#1284965988642590891 will (hint: conditions)
ok
I’m of the same mind, I don’t like having differing frames and I hate that they change with fashion lol.
eh, wear what you like screw everyone else
Picture frames.
my point stands
I think you’re misunderstanding that it doesn’t match and makes my brain itch.
find me on the runway 2025
antihistamines can help with that (probably)

Probably because Ribba is slang for erection in Swedish lol
My husband asked me to make our llm agent respond as if it were in a Werner Herzog film.
You don't know what art I have in them
Tbf im confident that Ikea are trolling with some of their namings
I read it in his voice
TBH, I'm surprised I even know his name & face without hearing it much
Chris got like bouncing excited when I read the response lol.
YES, my music voice control now fully integrated with my LLM.
Interesting project
Meanwhile I am viewing this video laidback in my chair
whats next a pc that walks a way from you
great progress with cooking with home assistant. I can search for dishes. can filter vegible options. and set one to cook.
where the ingredients and instructions are read from a sensor
Oh i already have that but for voice
cooking with home assistant?
Yes
what do you use?
Mealie
oh. does that has online recepies?
It's self hosted
You'd have to manually find them and import them
Allerhande is supported
😮
quick question, since I cant find it on google. Is there a way to import devices, that I configured with various different apps? Like Alexa, Smart Life etc. Or do I have to reset and reconfigure them all?
depends on the integration.
I just added them to the apps like the "Normal" way
YES and it depends on each intergration what to do. so make a topic and post the diffrent apps and peeps with those apps can awnser.
ty
Aren't HA Analytics skewed by folk having test/beta/duct-tape/how-do-i-break-this-shit instances running? I don't think it would be an impressionable amount but I got to musing...
Nah that's a very small group
I don't know of any people who run beta outside their production systems
Now I need to spawn enough Core test instances to skew the results
Gotta be some way to automate that...
I disable analytics on my dev box
sounds like a job for kubernetes (or however you spell it)
My Voice Preview Editions just arrived from Seeed! Didn't even get a shipping notification, so that's a lovely post-Xmas surprise.
And here's me who's most excited about receiving the new hose reel for the garden that I ordered 🤷♂️
Alphabetically
Yes
Hope it doesn't kink
Or does it not come with a hose
With hose
Apparently the kind of hose that comes with self-retracting reels is different; has to have more strength to avoid stretching when you pull on it
Makes sense, but I'd never thought about it before
more curious about this garden you ordered
Like I said; alphabetically
adegnr
wtf does that even mean
Garden alphabetically
Very orderly
@red rock i have installed mealie. You have to grab a computer search a recipe and upload it to mealie. And then set it as a meal for home assistant to see it right?
Having lunch and new years eve shopping after that.
Bbs.
But can you upload a meal using home assistant? To make it full search by letting the llm search a recept online loads it in mealie and sets it for dinner for example?
oh, there's an HA integration? 
Neat
So i can let my LLM search a meal online using a site:supportedwebsite and import the findings.
Neat. Why did missy didnt know this..
neat. Installed 🙂
I have this in an app, but self hosted is better
My goal is now to integrate all my self hosted apps lol
Immich, paperless-ngx, overseerr
Improve radarr and Sonarr
Neat. Ping me when you have a useful paperless integration
Lmao
I just want to throw all my docs in an LLM and ask answers from my voice assistant
I'm just not sure what value there is to gain, besides the equivalent of Prometheus...
Nah, not going to do that
Though I'd like a dashboard that tells me how many documents I haven't yet reviewed/categorized
I would love to be able to be like, hey can you check my letters when my appointment with the doctor was?
you trust LLM's enough for that?
I'd rather have something process incoming mail and add it to calendars than query appointments dynamically
If the letters are in a db with good topics the llm can search on
Same with cooking i dont trust the llm making up a receipt and then changes the receipt along the way
Sure. But then it has to present the content in a structured format. For example {{<llm part>, <DB query response>, <more llm>}}
I do not want the LLM to process that critical information at risk of it losing or changing details
especiall local LLM's with small models hallucinate all over the place
Bullshitting is the term. Llm dosnt has the capability to hallucinate
@primal laurel you can present the letter on a hass panel
Directly from the db
Google does that with gmail
Wish more providers did it, was a really neat feature
I know. But they already got enough of my info. I don't want to also give them my mail
Yeah thats why I said I wish more providers did it too
chickens
Gonna automate your chickens?
Arnt they fully automated yet.
Only if it involves ai
It got I
is it possible to edit device IP?
i made some changes to the router and the device IPs are all over the place now
i tried to edit using the core config file, but it just keeps overriding back to original IP
no, easiest is just to use host names
I'm back now to Google Home devices for voice assistance. The HA assistant is simply not usable for the daily life. The error rate is plain and simple too high. I've played with different gemini and open ai models as well but nothing comes near the low error rate of the Google assistant.
And yeah the intent system is nice but without further work on the sentences (in German) it has an error rate higher than 20%.
The wife acceptance factor is pretty bad at the current state. 😄
Did you buy a pe?
It's not a bad idea, my posture is kind of bad, might just experiment with an esp32
Someone will say invest in a decent chair, yeh well hermon miller aint in my budget
you sometimes can score good used chairs from office closures
Oh yeh, I heard about those websites, any good recommendations?
where are you located?
UK
Condolences
sorry, no idea.
Bit rich, but okay
Haha, fair enough
I would do a saved search on ebay and somesuch
Yeh, need to look in to it
Without outing where I used to live before... there were lots of "dodgy" places around West Yorkshire that got hold of stuff from business closing down for all sorts of stuff, chairs, tables etc
might be worth a quick search on facebook
Haven't lived in the area for 15 years so everywhere I knew about is probably gone
Wouldn't touch facebook marketplace with a barge pole tbh
Your condolences make much more sense now, lol
Folks please stay off-topic
Not saying you should buy from them, just use it to see what is around. The yellow pages doesn't exist anymore (for stuff like this) and people don't place classified adds in newspapers anymore.
classified ads?
Think you mean Friday ad, who buys from newspapers? lol
is it only seeable with that sunglasses from "They Live"
Exactly my point
OBEY!
But never mind, good luck, I think you will just shoot down anything I say anyway 🙂
shoot me first shoot me first
I'm confused, I never shot down anything you said. Just saying fb marketplace/gumtree isn't a trustworthy place to buy. Genuine office suppliers are better found directly from office sites/ebay.
Personals
I wish to make the acquaintance of a device that..,
I do... then I forget which one I'm interacting with and update stuff in the wrong one 🤣
YOLO bro, just do it on prod
otherwise you'll miss everything that your prod system has and it'll be broken for release
I should get into the habit of testing betas...
You mean luke Microsoft seems to do with Windows updates?
free testing
Test instance is created from current backup of prod instance so it's all there. Not sure that'll work with encryption keys going forward, but that's next months problem.
well, yea. That's the only reaon they stll offer a consumer version, right?
encryption keys? 
though my issue is mainly that I have a bunch of networked resources I don't want 2 instances to fight over
It does cause some funky cross talk
But my setup is pretty simple compared to some.
Obligatory shitpost
supposedly (I've never seen it in action) there's some frameworks that allow running a "shadow" instance and comparing the output of that instance to the live one and decide update quality that way
I wonder how hard it is to build those. Would be neat to have it for HA
I'd have to fix some things about recovering state at startup
which I meant to do for a while now either way...
somebody doing a private fireworks show in my street lmao
been going on for hours
not even NYE yet
I’m so grateful I live nowhere near where they will do a lot of fireworks.
Hi, new to this server. I don't know where to post. I have two questions:
- Can Denon HEOS speakers be used with HomeAssistant (or in general) without creating Denon account and using HEOS app?
- What options are there for wifi speakers that do NOT require an account to be created and internet connection?
I will not buy any wifi speakers that require an account and internet connection. If I have to go for open source then so be it but for now I would like to hear what people know. It is difficult to get information from the companies themselves.
#find-support and probably #1284966353798697001 for #2 and #1284966582375813201 for #1
No support here though.
my neighborhood is insane. Many rich people who spend €1000+
ill make a video tomorrow lol
They do 1k here for the football games, the first is going to be like 5k and 4th one neighbor hits like 10k
its essentially a dick measurement contest at this point
Yeah, I am pretty sure one neighbor owns a fireworks stand
I need to organize some travel fro new years at some point and spend it in a city that does a proper organized firework and bans individual ones
Ended up mounting the Voice PE next to an outlet. Not fancy but at least it’s not sitting on the counter anymore.
this is art!
That’s what I plan on doing for our kitchen VPE.
oh yea, I wanted to ask
how hard is it to disable the LED ring? it's just ESPHome, right?
Just use the neighbours if you are quick adding it, before they manage it
1000 IQ
I wonder what wonderful goodies the elderly couple have across the street, I bet they have a huge zigbee network
Yeah, you can take over the device in the compiler to turn it off completely. You can just turn the brightness down for a work around.
I need to order 1 or 2... but /me lazy about spending money
though I might be spending on 1st or 2nd either way, so maaybe 
Spend it on this, before you spend it on some unnecesary home assistant stuff
OH WAIT
🤣
Hi everyone o/
Hello
I'm new, will try to change all my Alexa things to Home Assistant with AI !
Currently installing HA on my Rpi 3B 😄
That sounds wonderful!
Lots of others have experienced issues using raspis (mainly because SD cards can be quite crap), just as a word of warning!
oh yeah, im just trying for now. If i love it, i'll go for a better Rpi with SSD. (Or maybe nvidia jetson i dont know)
Nah. Just waiting on a confirmation for something, then I'll reward myself with a new watch 
Not saying you should, but you could grab an optiplex or something like it, and run HA as a docker
BUY OUR STUFF
BETTER FOR YOU
MUCH EXCITE
Jetson might be fine
I might get one for running some of the AI stuff if I have reasonably well working microphones around my place 
BIG VOICES
many people like adding other things on once they start experimenting with home assistant, and end up wanting ESP home, mosquitto (MQTT) etc@ancient vigil
What about running it as pod in k8s?
you might find it gives you more room to grow, when the time comes 🙂
yea, let them start on the RPI3 🙂
whatever goats your float
also running it on armv8 
You mean let them get the bug first, then end up with a couple 42U racks like @clear ferry
I’M RUNNING A GREEN AND IT’S PERFECT
this is how it starts Missy
Dont know what's an ESP home or a mosquitto, i mean, i know what is a mosquitto but i guess we are not talking about the same thing xD (french here, so sometimes i'll not understand everything x) )
I remember clearly when I had a router with 4 LAN ports
and then added an 8 port switch, no way I could use 11 LAN ports
then I bought a 24 port switch because I was using 10
48U you pleb
and now I have a 48 port switch
I'm fine with 24ports+8 for now 
but I also live in a tiny flat and don't have any networked cameras or such
Hundreds?
over9000
You’ll get there, don’t worry.
Are you aware of the HACF?
You will do, don't rush into researching it right now, but you may want to expand things in the future. Not sure if the statement can translate well to french, but "the rabbit hole is deep"!!
Any thoughts on a readily available self-hosted cybersecurity training portal that can also engage in sending internally generated phishing attempts to test family members compliance and awareness
My wife said I wouldn't dare....
self hosted email 
Wanted something more convuluted and challenging
In the spirit of homelabing
I think most ISPs here block port25 by default 
I know the AVM routers do as well o.0
this is a question for you @clear ferry (sorry for 2 pings within a couple minutes)
That’s an effort lmfao. 🤣
i was not, now i'm, maybe it will be easier with french people, ahah ! i will see ! first i'll try to do it myself 😄
that's a weird translation 😄
About Highland Area Community Foundation
The guys who run that are part of our Creator Network, I adore them. It’s a HUGE community for Francophones. 


