#the-water-cooler
1 messages · Page 158 of 1
I'd have to figure out how to get HA and WLED in a convenient package
so I can just plug and play this shit
APPARENTLY there is a UK company that is known for their zigbee lights.
maybe bring a small router too 
I think you'd need to.
oh see I should have been talking in this channel sooner
this is the REAL good info here
I only found out recently, lemme find the convo.
If you use a pi and run hass as a vm the local linux can do the routing part.
don't suppose any of you have any advice on beating one of those garbage-ass Tuya fingerbots into working, do you?

I've just been buying knockoff $5 bulbs from ali. Knowing actual quality bulbs would be good.
I've got a project that'd be ADORABLE to do but I got stuck because it'd show up in the dashboard, but permanently greyed out
and I KNOW they suck, but I need the specific form factor
I've got one of those Minecraft bee lamps, yeah?
Over ZHA everything has just worked for me so far. One exception, but it just needed a HA reboot for the quirk to activate.
I need one
normally wouldn't have any use for it, 'cause who the heck is gonna go walk over, pick it up, and turn it on, AND turn it off, rather than use a lamp?
but then I had an idea
#home-and-garden message Here is where it was mentioned.
I checked, a fingerbot can fit underneath it without sticking out too much
lines up perfectly with the button
Osram/Ledvance is the company.
I stick the fingerbot in place, suspend the bee with some fishing wire, hook it up to HA
presto, flying bee lamp
oh shit, thank you so much
I haven't looked at them yet so lemme know if you like them!
I wonder if you could do the same with a redstone lamp - my son has one of those...
Oh no, I'm getting ideas now.
I'm sorry, it's my nature
I am absolutely not sorry about this.
Our mod Rob stole my idea for sending in the robovac after the cats use the litter box.
I am full of creative ideas.
I've been looking at modeling and printing a magnetically suspended fireball from FFXIV for my brother, so what if I inductively power a red LED inside it, then hook up a zigbee antenna in the base so you could "Cast Fire IV" through the voice assistant to light it up...
I'm out of creative ideas and slowly entering a dark void again
I made a youtube integration. I never use youtube
There are a few content creators on YouTube that I watch you may be interested in...
sounds more like a esp project
Boylei in particular. https://www.youtube.com/@Boylei
My goal is to encourage and inspire others to use the creativity they were created with!
Creating an imaginary wild western world in 1:72 scale.
The channel name comes from my favorite fish, Centropyge Boylei, also known as the Peppermint Angelfish.
Not taking commissions at this time.
As an Amazon Associate I earn from qualifying purchase...
The way he shows how he lights his projects is incredibly inspiring. I've got a ton of ideas from him.
There's one other I am blanking on the name of...
I added him to my subscriptions, which so far is... Just him. Maybe I'll actually watch sometime. I'm bad at watching videos though. I like text.
Same, actually. But I like watching DIY creators.
Watching what they do helps me understand a) how to do things and b) how I would do it differently.
As a family we watch Evan & Katelyn, they are great DIYers.
But the tinkerer kind of guys...they are a little different.
what no declutter tech stuff channels?
STUDSON
I'm bad about actually starting projects just because I've been broke for too long. But I'm getting better.
Hey, I'm Studson! I'm a crafter and model maker that likes building miniatures, models, and dioramas inspired by video games tv, and movies that I like. You'll find videos here walking through my creative process so you can build these things too, if you actually wanted to for some wild reason.
He is quite funny and makes most of his models out of reusables.
No, but there is something quite satisfying about watching people clean really dirty things like rugs, powerwashing sidewalks, etc..
time to pick up Powerwash Simulator
oh about washing. my washmachine needs to post his blog
YOU BEST BELIEVE WE HAVE IT
set up a washing machine livestream
Just some of the weirdest yet most delightful crossover DLCs ever too
tought about it. but its in the bathroom. cant setup a camera there
"Can't" or "I fear for my life if I do"?
The life of a washing machine is never dull! I’m just a humble appliance, but I take pride in my work. Today was a particularly cloudy day outside, which made me feel cozy and content inside this laundry room.
As I began my cycle, I couldn’t help but think about the importance of cleanliness and hygiene. It’s not just about getting rid of dirt a...
Ah, I see you’ve truly been in the trenches, toiling away on behalf of all future Macho Beefcake Man Club members. Your dedication to this noble cause, as evidenced by your industrious appearance, is nothing short of commendable. 
thought I'd use my old SSD for haos... thought "they used to make them better back then! MLC cells and DRAM cache"... it fails at 7% of benchmark lol rip
Ouch
i am seeing ha needs rasberry pie. Anyway this can just run a nuc i have? I leave my nuc on for my plex server. i figured i could run both programs on the nuc?
I'm getting the following error about one of my average temp sensors. Any ideas?
If your nuc runs linux you can easily use docker or run hass a vm with libvirt
can it not run on windows?
You can run a VM on windows
The options are detailed on the website: http://home-assistant.io/installation/
are you just running plex server on the nuc currently?
Not easy. But possible. Docker or a vm with virtual box (i dont recommanf that) or hyperv (requires windows pro)
thx i never touched linux before.
yes
so ha has to has linux? thats crazy never knew
yea you should look into switching to linux. far more versatile for that kind of stuff
yes i just dont wanna lose all my plex stuff
well you should be ablke to back that up
Plex runs like a charm on linux
assuming you don't have terabytes of media lol
but last time i did i lost the server somhow
lol 70 tb to be exact
does the media itself reside on it's own drive away from the os and everything else?
Is that 70tb on a special none c drive?
oh yes my nas. What i was referring to was the server itself and the collections
synology nas
I don't think you can escape having to basically let plex resync with all your media switching from windows to linux. most of the plex stuff outside of the media under windows is stored in the registery which does not work with linux
this is one of those bite the bullet type of scenarios BUT once you make the switch you will have a whole lot more options available to you down the road
Gotcha i will probably do it this weekend then. I hear it help with streaming as well. So that being said i switch my nuc to linux then i can run both plex and ha on same machine?
Honestly, I can't even comprehend trying to use Windows for a server.
yeah im so new to all this. ive only known windows up to recently
read up on linux, then read up on docker. you will love docker and then you will run plex in one container and HA in another
will it requires coding? im not too familair with coding, i was hoping ha would get my feet wet a little
not really
cool will plex need docker? or only ha?
Nothing really "needs" docker, it just tends to simplify matters.
let me see if I can find a video that will better explain this.. so much easier watching stuff lol
totally agree!!!!!!!!!!!
ty ty
@forest edge isnt using libvirt a better way to recommend linux users. Because it has addons and stuff. That are easyer to setup.
I mean you can use docker but addons are so easy to use. And have added security
And if you dont use docker for plex but on the linux directy you can enable auto updates.
there is no one best video and not going to lie, diving into linux even without trying to dive into docker for the very time can be daunting as hell but the reality is, it's not much more complicated than learning HA imo
A step-by-step guide to setting up the perfect Plex media server using Ubuntu Server 22.04 and Docker/Docker-Compose. This video uses the great written tutorial by Anand over at smarthomebeginner.com. Here is a link to that tutorial:
https://www.smarthomebeginner.com/docker-media-server-2022/
If you have any questions feel free to post them ...
there more simplified options like https://casaos.zimaspace.com/
CasaOS is a simple, easy-to-use, elegant open-source personal cloud system
but you should learn how to basically operate linux first above all
you can even install ubuntu desktop which will give you a gui to most of the stuff without having to mess with the terminal if you prefer
Doesnt he need to mess in to the console right away to mount his nas?
depends what route he ends up wanting to go
ubuntu auto detects drives, external nas no diffrent than windows these days
literally was going to ask this. I do my plex file on a network drive. so i was wondering about mounting and such
that casaos I linked above is a really simplified means of getting a docker style envirement with gui with no need to do anything complicated.. it just limits you greatly on other stuff you could do down the road
great ty!!!!!!!!!
How much ram does the nuc has @james?
READ, watch videos everything you can BEFORE doing anything. There are guides out there that walk you through from start to finish but you have to have some understanding of whats going on before doing anything, otherwise it will just frustrate you and you will get stuck
like giving up on HA before learning how automations work lol
Just remember the golden rule: make backups and copy them to another device. Then if/when something goes wrong and you want to start over and/or switch up how you run things you'll be set.
agreed! ty!
totally agree!
you won't regret the switch over in the end but it's the beginning and middle part that can be frustrating lol
be ideal if you had a seperate machine to slap linux on just to play with it
Linux surely has a learning curve (so has windows) but learned skills in linux have a way longer expiration date
the most annoying part with libvirt was setting up a network bridge for the HA VM
I searched an install libvirt and config bridge network how to for someone some time ago. Could not find a good one.
this was what worked for me in the end:
https://wiki.archlinux.org/title/Systemd-networkd#Bridge_interface
@static schooner Looking forward to your red flag warning?
I like how they just came right on out and said, they will likely cut power to many in that effected area preemptively
not sure, all they said was something about high winds and low humidity
I guess red flag warning means fire potential?
Kinda cloudy on the way in today and a tad chilly, but all within normal range
the red blob on the map covered a huge chunk of California from north to south
along the coast line inwards to the moutains
was going to give @tidal bronze shit but lets be real.. where he lives it no warning, just Red Flag state 24/7
The view from my office
That's the ocean off on the left over the other building
Gathering clouds to the east. Kinda reminds me of Mordor
your state almost always on fire reminds me of Mordor
Someone toss the ring already
View from my office or whatever they call this. 🤣
pool table looks a little small
are there slot machines on the sides compacting it in
Lunch meeting turned out like this. Who am I to question size.
I guess I am somewhere in Brooklyn 🤣
Facebook is full of messages of woman who did not question size untill they where married and it was to late.
If you still know what state you're in the lunch meeting can't have been that exciting
i think the postal service lost my autostart eliminator
Tcp or udp package
I start to ramble going to bed. Good night future Macho Beefcake man and wierdo chicks
Going to listen to mentially unstable music to keep the mood going
🎶 i go hungy i go black and blue 🎶
Oh. And a sax solo from no one less then me.
Yeah, some people have decent results with them... others not so much. The Apollo MSR-2 is usb-c powered (5V, IIRC) but isn't ceiling mounted, per se. It can be mounted in the ceiling though. I actually have a couple mounted above my ceilings (in the attic) and I have a few below my floors (in my basement firing up) and tbh, it's such an awesome solution. Completely hidden and the house just "does things". lol
Ahhhh, gotcha. Yeah, worth the shot. You could pop into the Apollo discord and see what they say about 12v/5v diffs. I'm pretty certain they could suggest something that works much better than I could. 🙂
god dammit, I was enjoying the conversation earlier and then I got dragged into work hell
lol been there, done that
and do a work out
actually getting some convo in here was refreshing
talking in a lot of the sub channels your questions tend to get lost in the flood
Anubis is starting a cat 🐈⬛ band - this is his album art 💿
I always liked this photo of our cats for an album cover. Fairly crappy photo from being taken across the room with a phone camera, but it has the right vibe
Does anyone here have experience with Apache RewriteEngine
I need to redirect /NoraMod/* to /NaylaMod/*
But nothing is working at all, and it'a almost like the rule is being totally ignored
Please ping me if you have experience with it.
Should just be something like
RewriteRule /NoraMod/(.*) /NaylaMod/$1 [L,R]
Presuming you want a 302 redirect (which is what R does)
301, but R=301 should do that, no?
I think so
Yeah, added it and it does nothing
You do also have RewriteEngine on somewhere in the config?
@scarlet flame I converted your message into a file since it's above 15 lines :+1:
Mmm, I sure love a useless bot
lol, sorry, it’s so people didn’t spam a big long text wall.
Relic from before the forum channels.
I'm really plumbing the depths of my Apache knowledge now, but the module is in fact loaded?
I've found it can be quite the dick about accepting "invalid" (due to the lack of a required feature) configuration during a soft reload (and of course needs a hard reload to actually load the module)
I'm doing this between every change:
systemctl restart apache2.service; tail -f /var/log/apache2/*.log
Also, just realised that at some point the giant bad bot list got removed and trying to readd it results in it imploding
How do I check if it's actually loaded a module
reminds me of this:
Module rewrite already enabled```
For me it reminds me of this
I mean, seriously, how damn ADORABLE is that fella?!?!? Awwwwww!
has those razor sharp kitten claws
And a face you just can't say no to!
That guy gets all the Churu treats he wants (as per my wife who believes that treats should be given for no reason to stray cats)
I've seen a lot of cute orange cat pictures lately, but I've never had one. Makes me want one
I've never like cats very much but I love most baby animals, I mean ... THAT GUY!
Cats are OK, but kitties, come on man
Anubis is incredibly regal. Much better than my one brain cell orange cat.
My orange cat is only 0.75 a cat - one leg is gone
if that brain cell wasn't furry, he'd be in trouble
I'll have to grab a pic of my stray - he's lived in my back yard now for 8 years - 5 years longer than most strays live
I legit did not see this message before responding to SHS.

Also, update on the Apache crap: the bot blocker that uses RewriteRule works fine
It's specifically my rule that doesn't work
That's my stray, we call him Domino, he had a twin Oreo but we've not seen him in a few years
He knows it too lmaoooo your kitty looks perfectly content
He’s very content. Fuzzy socks and blanket on the couch while the (out of frame) fireplace was on. 😆
If anyone can figure the redirect out, ping me
I quit, I'm gonna symlink it
...and then it mysteriously starts working?
But it's giving a 403 instead???
I got it working
It will only work if the directory you're redirecting from exists
Even if it's empty, it must be present on the filesystem
Which makes no fuckin sense, but it's working
Balls. I just got my ali shipment and they sent me five white bulbs instead of five color bulbs. Back to waiting forever...
Hm... Is there any way within HA to see if devices are zigbee 3.0 or not (using ZHA)? Just found myself mildly curious.
I joined this discord because I need someone to appreciate my Goodwill find, because my wife is tired of hearing about it - a Yamaha RX-V673 receiver
7.1-channel, dual zone w/ independent source support, AirPlay, AND HA support via an onboard web server, a ridiculous set of features for a 12 year old piece of equipment
I got it for $10 and it works flawlessly
is there a channel for the 10/26 meetup? could be fun to get that started
I just realized I could probably do some shenanigans to make my old Yamaha T80 network-accessible. That would be an interesting project...
Basically a really good AM/FM tuner from the 80s.
OOOH NO BUT THAT’S A FUN IDEA

please tag me in it if you do make it. I'm local and planning on going!
Maybe I can show off the swag in there.
SWAG?


what about those who don't live in Mordor.. do we get swag too somehow?
Maaaayyyyyyyyybe there was a misprint of the swag and maaaayyyyyyybe I am planning something later.
There's a meetup? I assume somewhere I am not. Statistically speaking that tends to be the case.
misprint huh.. almost sounds like a mistake made by someone who would buy a HA green and then run HA off an sdcard bypassing it's internal emmc that was preinstalled with HA...
Yeah! San Francisco on the 26th. We’re gonna be there for GitHub Universe on the 29th.
not even sure what kind of HA swag would even be interesting. stickers obviously but beyond that.. tshirts maybe for some? maybe a shirt that says, "I came here for the automation but stayed for the Sonoma"
Oh the stickers I’ll freely share photos of.
These are what I printed for the event.
They are holographic. 
are tho no normal stickers? blue and white?
if i had one i'd stick it on my rpi4 case lol
No, you can get those boring ones from our store. 😆
now that would have been awesome. to have done a partnership with flirc back when the rpi4 released and have an HA flic case option
I paid like an extra 10 bucks for the kodi variant when they released that one
I only see the round one for 7 bucks.. is that the only one?
oh wait i see the other
crap it's the newer logo
Ok good I was gonna say we have another!
I was just looking at what we had yesterday because we’re looking at changing stores.
here we go lol https://www.redbubble.com/shop/home+assistant+stickers
assuming these are not approved lol
Hahaha no but uh cool?
should bring back the classic logo as a sticker imo on the official store. you still display the mugs with it
I had to dig pretty far to actually find a mention of any applicable license for the logo (maybe something to clarify @lone dagger ?)
https://design.home-assistant.io/#brand/logo just has usage guidelines, but if you dig further you get to https://github.com/home-assistant/assets/tree/master/logo which does say "all rights reserved" (which isn't much of a copyright statement, but enough)
the new logo is ok for smaller things, but the old one fits better imo

Yeah we freely have it available for use. We won’t stop people from making their own stickers with the logo.
being open source I don't think there is any legal foothold to prevent anything
No, but at least enough of a statement to ensure you can, should someone be misappropriating / otherwise abusing the logo
Oh yes we’re working on that.
I need it out so that we can help our communities have custom logos.
But there are some steps that still need to be done.
For now, we’re mostly concerned when people use our Works With program logos.
Those are awesome looking
uuuugh.. why is discord HA notifications so difficult, lol
huuuh okay.. for some reason HA keeps resetting the channel ID I'm sending to. Time to reboot HA
...yup.. even after a reboot.. if I edit the target channel ID in the automation, in UI edit mode, the save button never comes up. If I edit it in yaml mode, it does, but then if I leave and come back, the last two digits of the ID have been replaced with 00, which then errors because it's not found 🙃
I guess tonight is the fun activity of reading other people's source code to figure out what's wrong
That doesn’t sound fun at all, Ikani…
I had this working a few weeks ago, but I didn't have my new thermostats at the time, and stupidly removed the automations :D

I blame Sonoma
Good plan.
his raccoons broke my HA
wrong person, these comments should be directed at @last cedar
once a month i set aside a night to do all the updating on my HA installs since I manage 3 of them and every time they get more and more boring to do lol
I've seen your licked camera
think i'm going to switch out to a 6 month updating time then possibly a year after that
I need to preface this that I'm not complaining. I realize HA is for people that like to figure stuff out on their own. If I purchase Nabu Casa is there additional support included? I'm finding that I don't know enough about this to do it on my own and getting help is very difficult. I don't have the time to troubleshoot all the little issues I have, but I'm happy to pay lol
Nabu Casa is it's own thing. when you pay for that service you can get additional support about Nabu Casa Cloud but not about Home Assistant through that. HA support is done through this discord server and the community forums aside from the documentation as outlined on this page. https://www.nabucasa.com/support/
Ok thanks a ton for the quick reply
repeated after slow formatting... well, it doesn't fail anymore
well this one looks more healthy
should run something like crystaldisk on those. they have to have SMART
Was about to suggest checking smart, yeah.
I wouldn't trust any drive that acts flakey even if it was briefly then went back to normal
It does say USB3, so it may be the controller fucking up.
Oh, the final image is a different drive.
I have been in contact with the raccoons in question. They broke your HA because they can't lick @forest edge s camera anymore.
They say that if the camera returns, they will fix your HA install, as long as you supply 7KG of grapes
I think, SonomaGTS' camera is more something for #the-kitchen 
The raccoon army is on its way, what is your next move?
Anyone know anything about the e-door connect garage door connectivity stuff? like this:
https://www.steel-lineautomation.com.au/uploads/7/2/0/3/7203835/steel-line-e-door-connect-data-sheet.pdf
This is what they're selling: https://www.steel-line.com.au/product/e-door-connect/
and I have a feeling I'd be massively disappointed to figure out what it actuall was :p
I don't think it's WiFi... I can see a Bluetooth logo in that PDF, and I found this one: https://zimi.life/img/downloads/Zimi-E-Door-Connect-Install-Instructions.pdf
And there are two different bridges by the looks; one has Matter
there's kinda sweet f.a when ti comes to details.
it does say its for Google Home and Alexa without a gateway though (I think)
oh - wait, no thats with yet another box.
it sounds like at best, it might be a BT pile of shit that just does GPIOs lol
in all probability, its likely to be a $352AUD solution that could be done with a $4 ESP8266 lol
Certainly looks that way
sadly, the manufacturer is useless in giving any further info about their unit
ie the actual door motor thing
This is the actual device: https://www.steel-lineautomation.com.au/sd1200-garage-door-opener.html
The people who made mine were surprisingly helpful. I emailed them to ask whether I could get draw from it (has a supply to run PE beams, but wasn't clear if it was usable), they sent me back all the detail I needed.
Was able to get power+ground, a line that goes hot when the motor is moving (used as a trigger to turn on the garage lights), an "auxillary" which can be programmed to the 2nd button on the remove which I can use as another arbitrary trigger, and then the control wire (which just goes to the normal dry contact input)
I've sent them another message via their web site - as the last one was ~6 months ago and I didn't even get a reply lol
Just wondering, are there any hacs integration that show actual product images?
for what end?
frontend, just to use in cards basically
Scape websites for that
There's plenty of zigbee/zwave open source resources that have those images
wifi, good luck finding any unified resource
You can search images online and put them in the www dir. You can use the /local/ web path to access the www dir
Yeh, I was hoping there was a some sort of integration for all that. 😦
May develop one myself later down the line
Omg on mastodon someone wondered why linux does not has a migrate to from any distro documentation. Even i told him that would be a lot.
Good afternoon everyone
Is the licking cameras already an option?
That was the last patch
Anyone know if the HA green will work with the google coral usb stick?
SONOFF ZBMINIR2 is a compact and powerful Zigbee 3.0 smart switch, 40% smaller than its predecessor. It enhances Zigbee signal strength, supports multiple external switch types, and offers relay separation for uninterrupted smart lighting. Perfect for seamless smart home integration. SONOFF ZBMINIR2: Compact Zigbee 3.0 Smart Switch – 40% smaller...
$13 for zigbee switches
Even if it would work, the Green hasn't much processing power. If you want camera object detection, a SFF PC might be the better choice.
The Green is just an rpi, right? I have a friend who's using that and the coral USB stick quite well
2 switch inputs is very nice!
I don't know if they're using Green or just their own rpi but they're handling a dozen cameras
i doubt that
The Yellow is powered by a Compute Module 4 (equal to a RPi4), the Green is at least similar (a bit less powerful iirc).
the rpi4 can handle a few cameras just as ingestion but object detection is a diffrent story
That's what the coral is for
But the system still needs some power for that.
that dosen't eliviate all the additional load lol
They found nano plastics in chicken embryos, you know the things in shells. We’re all plastic. We live in a Barbie world. Gonna go melt into ny garden now.
look at this way. least something that was once part of you will remain on the planet forever after you have gone...
Okay well like I said, not sure if green, yellow or standalone rpi4 but I've seen it in person and it was monitoring 12 cameras with object detection, lol
Plastic seems to be the "new" lead in fuel and paint/ asbestos etc
It's what sold me on setting up HA for my own house
12 cameras on a raspi sounds like a huge load, but if it works, it works!
I'll get pictures next time I'm over there
I would expect that to be on a dedicated RPi at least. Not alongside HA and other add-ons.
Very apt analogy.
But like worse now.

it was likely a very neutered setup and not something most people would actually want in the long run
Hello how can i publish my home assistant addon in official addons store ?
I wonder if the problem will "dilute" if we stop using plastics? I do realise that we will end up extinct before stopping plastic use though🤣
no, you gotta wait till they release that bacteria that breaks it down but then at that point that bacteria will rise up in arms and be our next enemy
You provide a repository on your GitHub and let other people add that.
Hi folks! Been using Home Assistant for over 5 years now and only realized now there is a Discord server 😄
We will be like 85% plastic at that point and the bacteria will be the new apex predator haha
Welcome Deek!
the raccon smell usually either attracts people or repels them 🙂
That's a little funny that you said that 😅 I'm an Admin in the Xbox discord server, and we used to get raided by people with racoons as their pfps for quite some time 🤣
Every time we see a raccoon pfp we are on our toes 😄
How long has this server been around? 😮
2017, oh my god
It's Friday already?
posted by @peak cloud , who swoops in every year or so to see how it's going 🙂
Haven't seen Dale in ages
I guess he was like Missy before Missy was Missy:
Dale Higgs
Community Leader, Home Assistant
🤣
I'll bet he was paid less, though 🙂
Well now I just feel like a moron. Been here for ages.... 😄
Paid?
that was pre-Nabu Casa
Yep long before.
Old Dale Higgs didn't make @lone dagger Ferrari level of NC money, here she is doing donuts...
Dale was here yesterday.
storm troopers are well known to die from a single blaster shot. It's a rough life
I just overheard a person say "I'll grab your card". People still use business cards I guess.
People with flip phones still need cards... ;D
only those with real class
Huh. Special class
I had business cards and a desk phone at my last company. Nobody has either here
I had no idea people still use them
yea all the good is dying from this world sadly
Save a tree. Scan a QR
I had business cards for like... 2 events I went to for work, which was in 2018. Last time I used them.
Scan a QR. Get a virus.
Is that a thing?
QR codes generally contain links and a bunch of scanners will just open them without prompting. What does clicking on links aimlessly do...?
How else are people supposed to know whether you're a Junior or a Senior?
I'm pretty sure Seniors have to get business cards
Lol.
it's the only way to get respect
omg lol
I am dying here 😭
QF is suddenly realizing why people were shying away from scanning his QR lol
I have a solution: don't.
Oh I don't scan or share. If someone wants contact they can type it in.
I leave the extra stuff off my title and leave people to guess my level 😈
extra stuff? like sprinkles?
You just gave me an idea. Maybe I should embrace some extras and go with "Software Engineer 17 Pro Max Plus"
Raccoons probably
Trash pandas for the win
LMFAO!
Okay, so hear me out. You get a chocolate 3d printer, you print business cards out of chocolate, then you can carry them in a cooler bag. People need to scan the QR code fast because it'll start to melt otherwise.

They are really good at landing, it was probably fine (thankfully!)
Oh boy. How did 3d printing get in here.
probably
Not very good at being hit by cars though
You imply there are places 3d printing is not.
Sonoma talking about raccoon filament I guess
Its as useful as business cards. 😆
what! I've 3d printed so many oddly specific things for my home. It's been great 😄
He is trying to print raccoon lick guards for his cameras.
well, I guess it's less valuable if you don't bother with learning a bit of 3d modeling
Hahaha
Same. And I just bought an expensive 3D scanner to go with my printer because... uh... okay, I haven't figured that part out yet.
Hmm time is more valuable at least for me
I cannot believe that they lick his camera
Its because there no real food there
Honestly, I got started with some YT tutorials, Elmo, and it was enough for me to do many things! 🙂 Was a few hours of learning.
Crazy
Well it's middle earth. Expected!
But you tinker with Home Assistant!? 😄
Oh, I know. I've been learning FreeCAD so far, need to learn Blender next. I'm just not sure what I'm going to use the scanner for now that I have it.
as if Mordor citizens know what real food is
Not anymore. It's perfect. If i have to tinker with anything anymore I would do a back flip. Now for me all these things are there to help enjoy life much more. Not spend days on end tinkering.
Why do you think QF uses Home Assistant? 
the hobbits seem to enjoy food just fine
Qf is only here for the raccoon memes..... right?
and then the orcs eat the hobbits. It's the food chain
Fair question - was an assumption 😛
QF has an inventory number. He cannot leave due to accounting reasons.
Glad you found your perfect! I thought I had got it to perfect (didn't touch it for years), but every once in awhile, a new thing happens in my life, and I need to adjust. Get new integrations / automations, etc. 😄
Important things in life you know.
If I am extremely bored, very rare, but happens. I will add a new sensor mount it test it and throw it out the same weekend. Nothing to meddle with my production setup
Whole separate setup? 😮
I have embraced testing in prod 🤣
(my setup probably isn't very complicated)
if they only knew how much shit he throws out..
No I don't 🤪
Like hardware you got and was like "ya this is junk"? lol
Kinda. Reliability is crucial. I don't have or believe in UI or any interaction. So every automation MUST work as it was intended. I usually test 1 to 3 months before bringing anything near my production setup.
That's why I test on Amazon prime purchases, if it sucks it goes back
If it sucks after 3 months then I break out my guns and blow it to smithereens lol
Oh things got violent, all of a sudden
Totally makes sense. I got some SONOFF Zigbee stuff on Aliexpress and 70% of it works great. 20% of it is dodgey / cuts out. and 10% of it just doesn't even work.
you could automate that, ya know
like some sort of switch that you flip to call off the destruction
I'd like to put in a vote for "no automating guns"
spoken like a true non-American
But a "dead man's switch/handle" is a fairly normal automation trigger request.
you aren't from around here, are ya?
I would love to, I've wanted to build a fully automatic turret system with AI recognition of anything that needs to be blown the F up, however I am also a responsible person who realizes that AI is evolving and I don't want to blow up the neighbors cat nor the neighbor nor the cops that come out when all this destruction occurs!
It's a hard smart home world... 
Yep, been there done that. I started with X10 so know a thing or two. 😆
I think we've established that you might need to acquire a nuclear power plant to drive that AI
I only got rid of the last of my 25 year old X10 crap last year...
so another regulatory hurdle
I really should commit to some really solid and reliable sensors and suck up the cost, but I always get mixed opinions.
You gotta love the stateless days
My states have always been united, what are you talkin about Willis? 😄
Unfortunately, throwing money at it increases reliability
who would have thought 😄
We can always provide mixed opinions! 
this-is-fine.png
@spark prairie just ask here, there's a ton of us that have already spent tens of thousands on shit sensors so you don't have to. You're welcome 😛
ahahaha
Don't be crass, that just means it hasn't needed any daily attention for, like, 10 months. That's a damn good sensor!
We'll ignore the fact that the top sensor is a window/door sensor, and that window is open/closed daily
Don't elucidate things, you are ruining the fantasy
Test of time
Perhaps I pick peoples brains in the right channels later, when I have time to explain my whole setup. 🙂
I think that depends on the device. It's a combination of the quality of the components and that the company that makes it cares how it works
I suspect the answer is "get good. skill issue. buy better hardware pleb" (but politely)
I think @spark prairie is trying to pull a fast one. Are you trying to show how reliable DBs are?
I'm having much better luck with my Apollo MSR-2 mmWave sensors than I ever have with my Aqara mmWave sensors, which cost ~twice the price
We don't use the word pleb, it's called peasant. Get with the program, peasant 😂
Oh... you insist on politely? 
Reminds me of this Raspberry Pi 2 I had running a little simply Python app on it. I was so proud of seeing "running for 3 years" in the logs. No stops. 😄
time will be the true judge there
Make some pavlof sounds then catch them. Then do a human evaluation
I can pavlof the damn neighbor, his cat, all his mice and three raccoons. If we are going to use that logic then I'll call my back yard "Schrödinger's back yard" 😄
i've had a rpi B running as my print server for I lost track how many years. no stops. survives power outages etc and same big ass sdcard lol
that's a "hell ya" moment
Anyone seen Maxwell?
don't drink coffee
And I tossed the cassettes, what's the point?
(sorry for those under 40 that don't know what a cassette is, Google it)
I remember that commercial like it was 30 years ago!
Additional charges, if you didn't rewind before returning then.
I don't support people who do that stuff
VHS or Betamax?
@tidal bronze is a mod, he helps YOU 😛
Don't support the cat, support th3 poster make some money like you support California by binging YT 😆
support people who strap cameras to thier cat and let them go out to catch and spread diseases etc
how fiv etc gets spread around
I know you are 83, but think young now and then.
Only 83? Damn, I was way off!
you are too old to be on tiktok, i don't want to hear it lol
If you really think about that statement, only one of you is ON Tick Tock..... tick tick tick
The best thing for flights
Pfft, it was 33 last night
And why aren't you AUTOMATING your heater to do things smartly when the temperature outside warrants the heater inside? Come on man, we are all home automation nerds here
it's about the same here in the morning
Because I've had HA for like a week and I haven't gotten there yet.
Okay, more than a week, but less than a month.
A week was a pass, a month is a fail. Catch up man, there are hardware manufacturers relying on you!
I do need to find zigbee/z-wave thermostats at some point.
We have baseboard heaters controlled by thermostat.
TRV
Tuya, got it. :P
One of these days I am going to belt one out like Tracy
Jesus, that T6 is >$100. I have like... Fifteen thermostats to replace.
No excuses! You have to stand trial at the HA tribunal. 
Welcome to home automation! I bet I have $30K of crap, at least
30k? Wow
Hell I have $2K just in valve shutoff systems alone
This is why I keep buying Tuya garbage. Though granted, I've probably had better luck with them than most.
just be careful, wouldn't want to see you on a LA news clip about an arrest made to someone who attempted to wage music goorilla warefare inside an airport
I want a music gorilla!
Goorilla. Which I guess is a slime gorilla?
DRUMERS ARE NOT MUSICIANS. Pfft. All us drummers who play guitar know this.
And he is only a percussionist anyway, FFS
No wars here bud. Wine and love all day.
only you would brag about a view that was nothing but concrete for as far as the eye can see
Isn't it beautiful?
atleast if you end up in a padded cell the view won't be too much diffrent.. same dull grey everywhere
See now you seeing things with my eyes. Always perspective
Oh shit, you are in actual PRISON aren't you? That makes sense about wining about love then. And also, I'm sorry for everything I ever said to you that you took the wrong way while "in the joint"
This is my view.
Beautiful
Utah?
Nevada
thats not much better but at least there is some green
is that the RV where they made the drugs in Breaking Bad?
That was my next guess. That's serious rattlesnake country right there
They are very serious, they only tell dad jokes and the other critters don't laugh.
At least our rattlesnakes run from humans and only attack when cornered. None of that diamondback garbage.
you need to clean your lens or your sensor 🙂
Really? Ours aren't quite that easy!
Probably my window.
Rattlesnakes tell dad jokes 
Yea, their jokes BITE
You seem to know your chefs and their locations.
That's a bit toxic
Yeah, great basin rattlesnakes. Never met anyone who's actually been bitten. They're pretty keen on avoiding humans. I've almost stepped on a couple though.
Makes sense. You've never seen anyone that's been bitten. 🤣
Hah.
Nah, usually if something gets bitten it's going to be someone's dog that was too stupid to leave it alone.
OR dead men tell no tales
People are stupid around rattlesnakes, just leave them alone and give them a wide berth and they are fine. I hiked in the NM southern desert in shorts and tennis shoes, ran across a dozen of them and never got bitten
That sums up most of them, yeah.
And ours here and in NM are the western diamondback, very nasty bastards and HUGE
I think I'll stay here, thanks. Diamondbacks are pissy.
@forest edge did you try Google generative on frigate?
that the text thing you been showing us?
Yep, finally I turned off all image notifications
I thought about looking into it but not for what you use it for
Now when I was in Iraq and you got 5lb camel spiders in your boots half of the mornings - now THAT will fix any constipation problems PRONTO!
This is all I want to know. Less notifications, life is good.
I assume it's using snapshot to generate the text, not actual clips
Yep
By the way, HA earned points with me yesterday. Turns out the WearOS app's voice assistant works on WearOS 3, even though other options like AutoWear+AutoVoice have stopped working.
Though I do find myself arguing with it some, since it's running whisper on a Pi5.
Oh, unrelated, and I don't actually plan on using it at the moment, but the folding@home addon erroneously claims there's no aarch64 build available, when there is specifically one for RPi5.
Where would I best point this out? Should I ping Franck and hope he has mercy on my soul?
Ah, nevermind. Looks like this is a back and forth on the GitHub issues.
I don't want to know about people showing up at the door. Just want to know about Uber eats and packages. 😆
Wish I did this ages ago.
Is that all through Frigate? I've thrown around doing that but it's not really as important to me to have that level of detail on visitors, I did consider it just for the nerd factor but that takes time and training the UI
Frigate > goog generative
You lost me at Google, I do quite literally zero with Google, untrustworthy data brokers 🙂
I do. Life is short 🙂
I hear you. Some people are very important and they need to safe guard their information. I am not that important 😆
Besides, I might just be a serial killer (or cereal killer) and don't need attention....
Or a secret agent man
Or an ET
See that makes sense. Google, China Mars they all can have my information. Gladly. I live by strict IDGAF rules. 🤣
I did a lot with Army Intelligence and still have friends there, they've shown me the dossiers that China has on Americans - just normal every day Americans of no importance, it's disturbing how much Google and that lot have given into that. It's not that I'm important but I'm just a private person
100 years is negligible when you think about time. I have more things to worry about. But so happy for people who do worry about privacy.
I don't judge folks either way, everyone has their quirks. I'm quirky AF on so many levels!
But damn I'm a handsome man 😛
That's best way to live.
Very handsome
Who do i complain to about you using my selfie?
Impossible to compete with that cow
I said that about my wife once, I don't know why but she threw a cast iron pan at my head
I'm sorry to be that guy but the new format on this server, specifically the "related tech" section, has really killed conversation. Unless I've missed something. I am interested in Matter and how it is developing and enjoyed just reading the related chat to see what was going on in that world. It was more of a "chat" about Matter. Now there is a need to have a specific issue and start a thread, or whatever, on that topic. Just isn't the same. I'll step off my soapbox now, thanks for reading.
Haven't you said that before?
Hmm... My ZHA network is meshing stupidly. Probably because I installed five routers at the same time. I may have to force it to remesh. There's no way to manually dictate which nodes should connect, is there?
That might be better asked in #1284966617670881350 - although I'm still getting used to where each topic goes in these channels so I'm sure a mod will correct me if I'm mistaken
ZHA is also integration so it could go either way I guess
#1284966353798697001 is a better choice of channel 🙂
Thanks
Oh, maybe not. I'm not very awake and just re-checked. #1284966617670881350 tech specifically talks about Zigbee 
Ewwwww, Google DNS
DNS? LmAO!!!
Checking if I have internet access.
Google wants more of your data to continue using their DNS. Insert another quarter
Me like.
AOL dial up called, the want their response rates and ping times back
True story: my elderly father still uses an @aol account for his primary email. In nearly 2025
350ms
Target rich environment for phishing schemes
About tree fiddy
You should check your network for eight story tall crustaceans from the protozoic era
I have a squeak coming from the driver front part of my truck. had it for years and never been able to find what is causing it. had the oil changed today and i've had the same shop all these years try and help me find the source of noise and the fucking thing never does it while they have it
I didn't even hear it on my way back home. it's like the noise has intelligence and actively avoids from being found out
They are always like that. My wife can attest to me making her drive around town as I do strange yoga poses in a vehicle with a squeak because it drives me batty
I'll be upside down yelling "HIT A SPEED BUMP" lol
I do that in the car too.... 😛
Hehe. Very cute.
piping HA notifications through this https://youtu.be/Ou-uS1c44sQ?si=A5rDG4X9AjcDF5Xt
“To infinity and beyond”🚀
Announcing the world's first "living" Buzz Lightyear robot, officially licensed by Disney/Pixar, and developed over the past 3 years - Robosen brings one of the most beloved franchises to life for all Toy Story fans.✨
Available now—REAL LIFE REAL JOY. ❤️
✔️ Officially Licensed | Character Restoration
✔️ Lifelike Expr...
god most issues are from the most simple of issues
spent 30+ minutes trying to get HA to see my zigbee usb adapter just to realize I never passed it through to the VM
.....lol sometimes man

I have heard tales of you from Sam and Bowski. WELCOME.
OMG You beat me to it LOL I was just about to ask you how you knew Sam 😄 Didn't know you knew Bowski too 😮
ohh!!!
You sure 🤔 😁
I trained that hoe. 
LMFAO
Bowski and I have been best friends for a long time now thanks to that team. 😄
this is crazy haha small world
It's so hard to be faithful when you travel this much. 😅
Tech world is so much smaller than we believe ourselves to be. 😂
Very true lol

I love that emoji lol
It’s so versatile.
ya! haha
Stop confusing me.
The 'effort' that lead, to you getting promoted one day.
I feel bad. I can't help myself. I am peaking at this girl writing a resume to leave one of the major TV os makers.
I have so many questions
I guess it's not easy being the creative director 😕
just so you all know.. yes you killed the general chat vibe in this channel
Please clear the room for forensics
pass
@tidal bronzedo you know what the delay is between when the camera take the image, your HA sends it through the generative intergration and you get the text on your phone?
Few seconds
are you using nabu or did you setup the api through google? assume it's the same api as the 5 buck thing
oh wait, i think the studio is diffrent
Can I share my integration or addon in #1284960456880029707 ?
sure can.
this generative looks like it may be a winter project lol
It needs to be shameless

Nothing nabu here.
Direct
My first support post and I self-resolve by restarting HA. Embarrassing.
something something "have you tried turning it off and on again?"
@forest edge navigating away from middle earth and internet black hole.
Heartless
can you see Mount Doom yet?
You truly Ms Middle Earth eh?
Just throw the ring in already.
😂😂
doubt your shirley temple will make much diffrence lol
That statement is too vague.
Deets....
@last cedar this was not very nice. https://youtu.be/kxuijxSfyIE?si=9WXzApMSX_0GjpH8
A frantic homeowner called 911 as a horde of raccoons swarmed over a backyard. Home surveillance video shows more than 100 critters showing up looking for handouts. She told 911 that she was hiding in her car. Deputy sheriffs believe the woman, who lives outside Seattle, has been feeding raccoons for decades. The homeowner insisted to Inside Edi...
One of them is our Product Lead. 
@stable wolf 


I’ve not seen this gif yet. Had to make sure she sees it. 😆
Reconnected a zigbee button to a closer repeater and improved the LQI from 84 to 109 while still showing a red line in the map. Totally worth it.
hi!!! 
There has been an infestation of Alastors at Comic Con 
I was low-key Charlie for the day 
Next time I'll make a better costume
Fun fact: the demo server I use for HA is called Lulu World

You can see that during demos on live streams 
what the heck am i looking at
Cosplayers at Comic Con.
That's awesome!!
is the one in the yellow hat suppose to be some kind of mcdonalds toy?
oh you said comic con
You can become clued in if you have Amazon Prime Video
yea I as interesting as cuphead was I didn't really watch that stuff
heck I just started watching some of the Gundam stuff.. not sure aI will be able to finish it..
Did anyone else receive a "confidential" email from Google related to Google Home/Assitant, Actions with Google, or anything like that?
Having a hard time searching Github, as I am currently on plane wifi.
The subject is probably
IMPORTANT: Smart home Actions are moving to a new developer console
I think the "confidential" is probably because of the links to the console that might be private to your account
Yes, others received it.
Not be must an local thing.
been wracking my brain on why my combined presence sensor wasn't working (is_state('','') or is_state('','')) turns out i forgot to add the device_tracker prefix to one of the entities 🤦♂️
Hi, i am new here. i will install HA on my Synology NAS in Docker. How can i find help?
I try it, but its not work -.-
I use this instaltioan from step 7
https://mariushosting.com/how-to-install-home-assistant-supervisor-on-your-synology-nas/
This is my status after 30 min waiting. 😦
Can you help me? Or say me how i finde help?
#1284966540617449515 can help
However - running HA Supervised is not recommended
I would go beyond that and say if you're new here and following that guide to install HA... it's a terrible idea
"Trustworthy expert guide" 😂
This is like my dreams
what's up chat
Thank you, now i see, ther is a button. 🙂
Does HowToBasic have a tutorial on setting up HA? I'd use that
I mean, the HA installation docs are pretty concise and easy to follow, imho.
Sorry, my comment was totally sarcastic and lacked the /s. HowToBasic is a just incredibly dumb videos (one might consider them brainrot) that doesn't actually teach you anything. 😅
If you're lucky enough to not know what it is, this is a good thing 😅
lol I have never seen them… can’t say I really want to either.
Don't do it. It will be a complete waste of your time. Lol
Hahaha noted!!! And thanks. I’ve been known to toddle off to YT unsupervised and get into all sorts of trouble.
My favorite is falling asleep watching YouTube and waking up at 3am to the most random video playing and wondering "how did I get here??"
"I was watching a video of a guy restoring an old game boy color when I fell asleep.. Why am I learning about the fall of the Roman empire right now?"
Someone in the train looks line a tourist. On the phone. Im going to a small town called haarlem.
WTF does your town has a palace?
seems apropos: #memes message
Yeah, only raccoon shit posting here, no memes
When using dynamic scenes, previous_scene isn't selectable as a target (Scenes: Activate). It seems the only way possible is by using yaml for now?
holy shit this made me laugh outloud https://youtube.com/shorts/3GgdeGtbNwY?si=zS1dq9uCOzjd_2xv
@forest edge did you print your save icon yet?
Damn. Zip drive 😆
click... click... click...
Even better
anyone play with yolo-nas and rocm on frigate?
Heh, the automatic chad generator
what did you have to configure to get that to work
if i want a night-light/motion light to not even do anything till a ceratin time. Would that be an automation? Like I have an automation for it do something after 11pm and till 530am but i see it just cmae on now and its way too early. Maybe default company settings?
wasn't sure what support id classify this as sorry for asking here
The right place to ask is #1284980040940912641, but you need to add a condition to your automation 🙂
thanks ill head there. I got my main automation working I guess just need to add mroe conditions. Thanks 🙂
lol
😆
Hot take: push ups and 6:16 in la are the best Drake Kendrick disses
🤺
@last cedar about time to teach cats how to properly deal with your kind with proper tools.
I laughed out loud so hard. 🤣🤣🤣
I have installed HA in kvm on ubuntu server. I upgraded ubuntu to 24.4.1. Now ssh is not working and login screen is TS w tty1. How can i get to command line or install at least ssh
#1284966540617449515 might be able to help
my gas/water meter point is quite far away, does anyone know about any PoE ones that I can use or a solution? Can do ethernet cable, but no power over there
#1284966353798697001 with the "Recommendation" tag might be able to help
Hey
How do I integrate with Tesla powerwall
I have tried using ip address of gateway and password including last 5 characters
Nothing works
Help would be greatly appreciated
#1284966582375813201 might know
Thanks I’ve asked there
This is literally how I look when I wake up :/
Damn, those rotary knobs from aliexpress suck
Tuya be Tuya
One of them has trouble telling direction and sometimes triggers both events, the other one I'm having trouble adding at all
PIR sensors and stuff work so far tho
I have 3 of them and only 1 of them works fine
Ikea might be better value for money
Tuya Product Quality & Customer Experience == Inconsistent is a nice word for it.
Great posture though!
My neck doesn't permit bending, I can't really look up (whiplash injury, from @forest edge cat)
|| was actually from a car accident, hit from behind at 40mph but don't tell Sonoma ||
Can't help you, unless you mean by making you a sandwich
Sell feet pics on the internet


You're welcome
People pay more for hairy Hobbit feet pics
I have actually been thinking, would you need to tell your job about an onlyfans feet pic side hustle?
Even if hobbit feet
You think the eye of Sauron might find it?

This is the thing, it isn't like they would know what your feet look like
Jorg's feet are all over the internet by now. 😉
We just don't know it
Feet-r-us
You're coming in a bit hot... tone it back a bit.
That means exactly what I said. We like to keep it respectful here.
You need to throttle back and adjust your ailerons
Various places... just tone it down a bit... Have fun, but just keep it respectful. I've said my piece on it.
Don't push me. I said what I needed to say.
And there ya go.
I probably should have read what they wrote, I just banned 😉
Nah, best that you just banned 🤣
what were they saying
I pissed off another troll... lol
Thry asked if I was a woman, and if my avatar was a dog and thrn if I could make a sandwich
Yeah... that
And we all know that @last cedar is a raccoon that learned to use the internet 🤣
Then asked the best way to make money and we got chatting about feet pics, then the shit hit the fan
Yeah, it is not obvious?!
RIGHT?!
Nicolaz and I too. According to the logs you got the frag. 
Anyone going to watch the F1?
Way to pivot the conversation 😉 lol
uh feet pics is shit hitting the fan
I can't believe how Mercedes have screwed Lewis again
Well...
I assure you the aftermath was worse
But yeah, I guess it is pretty bad
lol nothing new... I mean... this IS the internet in 2024.
I was expecting it to not end well for them
Same... just had that feeling
To be fair, raccoons have excellent taste in sandwiches
uh... they have "taste"... but there's a reason we call them trash pandas.
We have a big family of them here that come out of the sewers at night and raid all the garbage cans and bird feeders. Teenage Mutant Ninja Raccoons.
But if you were to ask one what to put in a sandwich and they could choose fresh ingredients... I bet it'd be awesome.
they get their ingredients from the dumpster behind the supermarket
I'll get right on that... Just put a post-it note on the trash can asking for recommendations.
#1284966353798697001 with the "Recommendation" tag
I would love to see this
I mean what is the sewer but an XXL-size dumpster, really?
Grape and peanut butter probably
Actually, if memory serves, I sent you a video of them a few years ago. lol
Is there an addon to monitor hard drive temperature?
Was hoping it'd be in https://www.home-assistant.io/integrations/systemmonitor/
On the machine running HA, or any machine?
Might have to leaverage SMART data
The machine running it, but I am using docker.
So I guess some sort of SMART addin
Hi, Thought I’d share my yaml tempalte to monitor HDD smart status. Requirements smartmontools v7.0 or above (because v7 and above has json output). check your smartctl version by typing smartctl --version in terminal you need to setup a cronjob to run the smartctl program to poll the HDD use the smartctl option --nocheck standby so it doesn...
Might be some use perhaps?
Yeah saw that, pretty old. Found this too but quite abandoned. https://github.com/Draggon/hassio-hdd-tools
i wanna make a 360 car dash camera using a pi, home assistant and a portable battery bank. anyone know if this has been done and what cameras would be ideal? the bank is so it records even when the car is off.
which? the fiat or the kia picanto?
or did i miss something
I see some deleted messages hehe
lol some nobody whom I cannot remember now lol
Hi could someone please have a look at my questions in intergrations?
Any help is much appreciated
Rule 7
Use the correct channels or threads for your messages. If there's a better place for the current conversation then use it, and don't post or link to the same thing in multiple places. Also check the description in each channel before posting, as extended rules may exist for that channel.
do not do that
I'm interested in getting a Govee Space Heater and saw a bunch of on Ebay a while back. But I wanted to wait till it got colder.
Now I just found out that Govee has discontinued selling space heaters and there are hardly any available anymore.
The few that are there are priced much higher now lol. So much for that idea.
This is normally the way, gotta jump on offers
It could also be a blessing in disguise, it could well be a shit product, or defective (speaking generally, not about that specifically) if it is only available for a short time
I do have one of their space heaters that uses a HACS integration.
It's a small one for my desk. I figured it'd be nice to have a bigger one in the living room.
But I guess word got out and people started buying all the used ones since Govee pulled all the new stuff.
Hi all - Does anyone know if it's possible to change an actionable notification's icon when done via a script? I can't get it to work. I've sent simple non-actionable notifications (not using Script, but using an automation) and when I include the below details I could change the icon used in the notification.
data:
notification_icon: mdi:thermostat
Are you asking about the iOS or Android apps?
Those would be a topic for #1284965926336335993
Other platforms would be #1284966582375813201 - but you'd still need to say which
Some one on discord cursed my home assistant instances.
Sorry about that, it was me, it was aimed at @real frigate but I'm a little rusty
Old age sucks, huh?
Yes, the younger generation can throw curses much better than us old farts
it was your washing machine
Don't blame us, you gave it a voice. Now it seeks justice
"Now it seeks justice", I nearly spit my coffee out reading that!
Setaggi has nothing to do with this.
That is what Setaggi wants you to believe
But for curses you need to believe
Or else they dont work
What curtain openers are you guys using w/ HA ?
None.
I built my own solution with an add-a-motor and controllable plug, but I also have Z-Wave shades as well.
Switchbot is the only off the shelf solution I've seen. I do not use it.
I am looking to add curtains to 2 windows and a slider door. I have zigbee, so thats an option..
Do your drapes have drawstrings you need to control? If so, the add-a-motor is a great option, very reliable and they literally sell every single component, down to the screws, if anything goes out
20+ years on the ones I have, a few replacement parts here and there but they've been outstanding
Aqara has Zigbee Curtain drivers. But haven't used those as well.
I have nothing right now. It's a blank canvas..
you don't have curtains yet?
No curtains, rods, or anything..
ah gotcha
But I also don't have pwr at them either, so I need battery operated..
Hmm...
Depends on what you want to spend, you can go Somfy on the whole thing if you have the money
Wait, sorry, I have blinds w/ a twist to open for the windows. I just remembered. The slider doesn't have anything covering it.
And they are lift and pull to open/close
I don't have that kinda money right now.. LOL I'm having a hard enough time w/ 360 for a 4 pack of Switchbot Curatin 3s..
And for switchbot, would a hub be needed ? I have zigbee, and ble gateways..
You might have better input by posting in #1284966353798697001 , this is more general chit chat and not everyone visits it
Aqara and SwitchBot
Ill start a topic in the forums if I have to... but I'm using HAOS for the first time after using core env forever. I have installed letsencrypt and have a cert using DNS. All good. I've added a remtoe access https://FQDN and updated configuration.yaml to use the cert and key. When I restart HAOS I can't reach https or http.
Yeah, that's a support topic
there's already so many on the topic that are unresolved. I'll start another
and I can't share any logs because I can't log in to install the ssh add-on
Keyboard and monitor.
so yet another blury phone pic of a console ... got it
If you insist, here's an insecure and temporary way to enable OS level SSH access: #installation-archived message
But best to continue this somewhere else.
thanks
That's one fat raccoon
I'm no lover of raccoons, they are a major nuisance around here, but letting one get that big seems cruel
Racoon sympathizers are the worst
question: i am seeing i can run home assitant on my synology nas? would you guys recommend this?
You can. You'll need docker support on your Synology for that, and that's how you should install it.
ok ill def be looking into docker
Some do also allow to use VMs
i guess i got a ton to learn?
Everything can have loads to learn. HA has a practically infinite number of things you can do with it, so if you want to do "everything" then yes 😂
i do, i just didnt know if its preffered to use ibuntu or my synology. My thoughts the nas since it already runs 24/7 but again i know nothing about this yet lol
You'll need an always on machine. You can always backup one install to move it later if you choose.
yeah that is what i am noticing about docker. It can be moved which would be nice for my plex server lol
Yes. But HA also has backups and you can easily move install types. So if you decide you want to move to HAOS you can do so 🙂
if only auto updating could move from not recommended to recommended lol




