#the-water-cooler
1 messages · Page 35 of 1
If life is simple is it worth living?
you may wanna rethink what you just said lol
I thought complicating simple things is what we all do here.
I had to leave my Lenovo clocks behind. ☹️ sucks
you're listening on 12348
I'm willing, and even excited by, doing something complicated to simplify my life
It pays dividends, and I think it's the reason that HA exists
well yes, 12348 incoming, that gets forwarded to 12345 for the other servers
I thought those were meant to be the same
99999999
because the stream directive and the http directive can't listen to the same port
stream listens to 12348
https://www.nginx.com/blog/running-non-ssl-protocols-over-ssl-port-nginx-1-15-2/ just was reading through this
http listens to 12345
figured that's where you were
yes
the defines two upstreams, those could be any ports, but they are 22\443 there, in my that was 22\12345
and the listen directive would be from the outside coming in
but 
that is all within the stream directive
those people trying to sell "smart water bottles" love to hear that lol
You don't drink smart water!? Right.
pretty sure putting water in a smart water bottle dosen't make the water smart
I just like rainbow lights
This is better.
don't tell me you actually buy into that crap
Because we have gills
Wasn't @static schooner doing something with Litter Robot? 😛
https://old.reddit.com/r/homeassistant/comments/10gzg7m/anything_i_can_automate_with_this_data_of_how/
I just have no interest in data mining for that, just to keep track of whether they're working or need attention
I track how many times each cat uses it in a 24 hour period but thats about it
I don't do anything with long term stats in general
what about in off-topic
Yeah, my horizon is about a day.
I do see that they're both using it, but how often isn't really an issue
I thought the meow/knock sound automation was a neat thing from that thread
Nobody is actually using the data 😂
Though someone suggested auto ordering cat litter
counter entered at the start of a new box of trash bags that auto counts down with each change wouldn't be a bad one
Speaking of that, need to order some
Where can I get help regarding Hacs custom integrations?
The fan or air freshener idea is fine, but there needs to be a delay after the cat exits the litter box to avoid them getting cranky
#integrations-archived or the repo for it 🙂
Air freshener is pretty useful. Been running that automation for ages.
we're talking about cats.. not your dirty ass on the shitter
I meant the entire house
I have air fresheners and some of those diffusers that you can add some essential oils to
Of course. You don't?
I run them for short periods throughout the day to help prompt my brain that it's time for X, e.g. lavender before bed. It's a weird brain trick but it works
I have different themes depending on area
themes?
It's also ideal for this time of year when I'm not opening windows as much as I should because of the freezing temperatures outside
Chicken theme, cow theme, general barnyard theme
bedroom smell like a wild forest? you put on your furry suit and beat your chest?
Sea spray, berry and bramble etc.
I want smells that appeal to me.
Fresh PCB
Beer? Wowza
That'll do it
Beer is only outside in that patio fridge not even in the house. Stinks up the place.
does it offend your ongoing wine smell? lol
💯
I wouldn't mind some off and on fresh outta oven PCB smell. Used to die for that 20 years ago.
That's the shizzle
Ooh wine, good idea. I should have a glass
BTW try and switch to macadamia, peanuts not that good for you.
I will join. 🍻
yes mother
These signs are made in the United States out of recycled aluminum. Have fun protecting your property with a little humor. Will hang easily wherever you like best indoors or outdoors, in the kitchen, bathroom, bedroom, garage, workshop, game room, man cave, garden, the possibilities are endless… ...
what about the oils makes them essential
Raccoon attraction oil, perhaps? Then I could understand
You should get a real raccoon
Hehehe, it's a good question
she tried but they keep suffocating before they reach the destination
sad raccoon noises
Time for some wine.
should just get a pet coyote instead. the universe is telling you that
Why not? They are cute as well
I only need an otter, beaver, a few owls, possum, skunk, raccoon, thorny devil, llama, alpaca, goats and a chimpaze
Oh and a fox
Wowza
I can add to this list as I get more obscessed with other animals
They are cute and I have no self control
Do you have dog / cat?
6 cats
good thing you live in a country were pet imports are severely restricted then lol
Easy now
We used to have a llama and some sheep across from my office building when I lived in Champaign, IL
I live pretty close to there
then they knocked it all down and built a hotel 🙂
But do you have a llama?
big grain elevator, too
Llamas are lit, but you have to be careful, I read a handy guide where they carry knives in their fur and listen to Norwegian Deathmetal
Ah
those the ones that dropped out of school
Lmao
They are, in fact, the llama you saw? Maybe
Alpacas are easier than llamas
There are 3 in a field quite close to me
Might wnd up being 3 in my back garden, by some strange coincidence
I am clearly in the wrong line of work
did you get it drunk?
LOL
do NOT go home with a llama
Asking the real questions
Alpacas are a lot lighter and easier to kidnap, not that I have been doing any research though...
Only about 70kg
there used to be TV commercials encouraging people to raise alpacas
Where?
right here in San Diego, as I recall
Is that a IL thing?
it gets quite rural just east and north of here
there use to be a small farm here that had some, then they were gone and the next day the Perkin's here had alpaca burgers. no joke
They are not gamey as camel
My day is ruined and it is only 00:06
Ffs
Those burgers are good. No joke
Sadly I am unable to find the selfie with the Alpaca
Talk about kicking me whilst I am down
which? or both? cause I don't remember if it was alpaca or llama now lol
This day just keeps getting worse
Both taste better than camel
Wait, here it is!
That
It had a zip all the way down the neck underneath
I don't believe that's a real alpaca
Not what I was expecting
looks sick lol
It is asleep, clearly
Over the course of the evening we smuggled a bottle of beer, a plate, a number of chocolate coins, and several other random items into it
Real as real gets
"Into"...
It was a secret santa present and there was much hilarity when the recipient realised we'd added bonuses 😛
So someone really went home with a llama
do we need to ask where the entry point was?
all puppets load from the back
Well I did say
I nearly spat my drink out you monster
ah missed that comment
@last cedar what you drinking? Don't say beer
Hold on. I have just the thing.
Straight from the alpaca
Erm, some pineapple drink
We had a bad influence on other attendees too 😇
I swear I just had it here... can't have been more than three years ago
With rum?
At this time of night, the thing easiest to get to gets drunk
Pineapple juice, malibu rum, tad of sugar syrup plus amaretto cherries. Done!
Winnie the Pooh? My childhood is ruined
Not tried malibu actually!
We had some captain morgan.
To be honest I haven't drunk maybe more than 2 shots in a couple of months, not sure why
Oh boy captn M, been ages since I heard that name.
that's college booze
I tried one... Oakenheart I think it was, was too nice to mix, but it made an amazing drink
never had a pilot the name of Morgan? I call sus
If you don't drink something straight don't use it to mix it as well. 😀
Charlie stunned that people tend to drink normal orange juice without alcohol added.
HA + Wireguard + code-server + wine = good times.
look at that fancy ass meal lol
Testing history stats sensor for this damn water recirc. What did I get myself into 😬
hydroponics
That looks like an ok way to fly
just missing the dude walking by cutting a fart
Next dude pretty far out.
Only way when you do 150 to 180 flights a year
I am pretty sure you have only flown four times.
pretty sure he's only ever walked on land 4 times
only to molt
780 miles driven in 2022
Light theme omg
I knew that was coming.
the vs code extension is pretty neat but so is browser editing.
Good catch. 😆 keeping that reflective privacy active
I coulda told you it was complicated.. oh, I did 🙂
Yep you did.
You had to when I am around?
something wrong with that bun
they had to shrink it to fit more meat in
If by no carbs you mean no carburetors, you're right
easier than getting a bigger mouth
is it shadow as to why the back half of those tots look over cooked?
Popcorn chicken and tots
those are popcorn chicken?
Is that a pastrami burger?
now i want a wendy's burger
Huh. Beef don't come in squares
dosen't the shit you eat come star shaped?
Oh
All the meats
That's Arby's. Are they still in business?
yes
Maybe 20+ years since I last tried. Can't even remember what it tastes like.
pretty sure we've already established you don't know what good food taste like lol
Yesterday I was thinking about you while having this. Chengdu style mushroom hotpot, with octopus, fishballs and Berkshire pork belly. Yep hard to find good food like Arby's around where I live.
omg i almost vomited
So so good. Wife had with wagyu and loved it as well. Just gotta deal with the trailing numbness that comes with Szechuan peppers.
@forest edge you really need to come to socal, seriously.
Hey @midnight adder just wanted to update you, I've got the new fire remote pro controlling my entire motorhome and media in it!!!!
no arby's, no thanks lol
I will find you Arby's
Last I remember most of the dunkin, Krispy Kreme, Arby's, Sonic etc locations closed in and around LA
Not in the inland empire lol
Oh
Lol sorry to jump in.
they recently flood? lol
saw a thing earlier talking about how cali's water reservoirs were quickly refilling due to all the rain
Bam!
It was raining a bit...
I do enjoy the rain with my Nissan but I'm in the process of installing home assistant into it....lol I figured I already have a fully automated motorhome why not a drift car lol
Loving the rain. Nothing like seeing rain skips on sprinkler controller. It's been awhile
Oh welp, passing middle earth. Not going to see any satellites for about 20 minutes 😕
yea just got the alert on the phone about tree huggers nearby
my grass is looking great
Capybara belongs on that list.
Yep same here.
Hopefully things becomes the norm
I don't do much in colder months. All that and reseedint before spring. But I should've added fertilizer.
Nice.
why do lights in your house always look pink?
looks like the river has dried up for now:
we like it
send some wota, we nearly burned our land on new years
Why do you want to make people shut windows when it's nice outside.
does your house even have windows?
Linux only
Nice.
Nice.
Rice.
Missing mine much. Been sick lately. Hard to stay away him, now. 😕
😦
ko derf
Doing all my flying Fri to Monday so wife can be beside him.
man, what did I eat. I'm full.
Getting old ain't easy.
Yes.
that something that filtered out of beverly hills?
I have seen animals put on stretchers in like the animal hospital for moving between rooms but we don't have any kind of ambulance
wouldn't even call them stretchers, just stainless steel tables with wheels
These are battery operated, touch to lift/drop. But pretty common.
hell we only have like 1 24/7 emergency vet hospital now and it's like 40 mins away
we use to have more but covid changed all of that
There's shortage of IM specialists and ultrasound techs even here.
my nearest emergency vet would be 30+ minutes away as well.
But 24/7 ERs all over.
But if they don't have digital x-rays, helical CT/MRI and ultrasound kinda not real ER. So not many 😆
and if they're trying to phone home it might be ET
As work continues on my new American house, here are six house-related objects I only encountered after moving to the United States.
Subscribe to my channel: https://www.youtube.com/channel/UCqabPJa-N6ORAlO5yMBtWXg?sub_confirmation=1
— Support me on Patreon: https://www.patreon.com/LostinthePond
— Follow me on Twitter: https://twitter.com/Lost...
he must be a scientist
I wish he was my neighbor
yay blueprints, I don't want to do a billion steps to use dimmers on these little ikea remotes
i've yet to use a blueprint.
I used one that was built in
but I have yet to download one from forums or such but I am about to because it is a crazy amount of work to do for all of these things
Those are good blueprints, I use one for my STYRBAR
I'm actually using one of each of the built in blueprints. the motion activated light and zone notification
nice jumbers, does that have dimming?
I wasn't expecting so much work to enable hold to dim 😛
You can make it do dimming if you want. It has single press, long press, release, and double press. I have a long press action that ups the brightness and then delays 500ms which keeps getting triggered until you release it
I meant your device. neat
yeah, I don't want the virtual double press. I went to remove it from yaml before seeing they already made it optional. perfect
I crammed a lot of stuff into that blueprint. Single press up/down are just on/off, holding up/down increases/decreases brightness, double press up is max brightness, double press down fades off over 5 minutes, double press left/right switches between color temp and RGB modes, holding left/right will cycle through the different RGB colors or color temps depending on what mode it's currently in, and single left/right will just single step through them
Double tap max brightness is a good idea
I love your idea about double press down fades off slowly
google is doubling down on ai this year from what i read
curious what that entails since ai products was mentioned
The email i would get would just have 2 words, one which rhymes with duck
oh because the no sleeping with coworkers no longer applies? lol
classic movie plot
Fun fact, Norway's wealthiest man pays $200k per day in taxes
America's would be lucky to pay $200 a year lol
that would be lucky. wish i only paid that much
We have no rules against it
I did actually ask a co-worker, we mutually decided it was a bad idea 🙂
And no, I won't go into detail 🤣
the bad idea was smart. usually those situations go bad, real bad
unless they end in marriage lol
I started typing a response, then remembered I wouldn't go into details
lol
i mean as long as those details don't include sweat and body friction don't think you would get in much trouble
Top leaders on dizzyingly high salaries who pay little tax. A small elite who takes home a big chunk of the national income. No, we are not talking about the USA or the UK – this is Norway in 2020, according to Statistics Norway.
love how the reality of the world clumps us all into the same pool lol
well aside from being able to have racoon as pets.. something we american's need to ban
Atxbyea, have you updated your tuya nas wr01b plugs? Any problems with/after the update?
No, but like, no details 🤣
Is that the ZigBee plugs @shadow prawn ?
Hi
Ever since I installed HACS I have had daily threat attempts on my network from outsiders. Have any of you guys the same experience?
Just don't have internet
Won't have to speak to me either, win win
Trögnätet från österbotten
Häagen dazs
Yes, they show an update in z2m
You need to update the 2nd one
My plugs also not have shown the need of an update at one time. First one showed it and weeks later the other ones also have shown it. Not sure if i should update them. I do not trust Tuya 😂
Anyone have any experience with gparted?
A lot of people
Would someone be able to tell me how long it should take to shrink a 980gb with 66gb of data down to 74gb? It's not responding to mouse or keyboard, and idk if it's doing it's thing or if it froze.
Generally speaking I would never shrink a volume, but it usually works, and I'm guessing it's an SSD?
Should be fairly quick
It takes however long is needed to move the data
But you of course have backups ? Right
Hours to days based on my previous Googling
I do have backups. It's been running for about an hour.
I'd say if it isn't done in a few hours, just stop, recreate partitions and copy backup back
But again, shrinking is ... Eeeeeeh
Not all filesystems will have a good time
ext4 is fine with it, if done right
I've done it with LVM successfully
Even if there is a problem with the back up, it's pretty much just a debian install with a few docker containers so even from scratch I'm back up in an hour or two
Yes
Thanks for the advice.
oh, okay
Head to https://squarespace.com/angethegreat to save 10% off your first purchase of a website or domain using code angethegreat
Support Engine Simulator 2.0 on Patreon!
https://www.patreon.com/atg_engine_simulator
The steam engine in the video:https://bit.ly/GTE45E1ER3
More steam engines from StirlingKit: https://bit.ly/RRF564E5E
Use my discou...
I love this person's videos.
This video is different from his normal videos sort of.
@shadow prawn
huge surge in misleading labeled and fake foods
lol that sucks
I actually seen that type of crap a lot over the years. some product that has no training or proper documentation implemented which works perfectly fine while the select few who was there when it was installed remain employed but then those people move on and the replacements have no clue wtf to do
why overcomplicated system are shiet
Yeah, I've seen it myself many times. Systems that are important, but that nobody really understands, and if it breaks ... 
that is the story of every "legacy" system in companies where technology is acquired
Have you found chocolately?
Yes. And apparently that can be installed by winget
RIP appget
@clear ferry what did you say you printed at for 120mm/s?
temp for pla
okay, that helps a lot
I tried 220, then down to 215, now at 225
trying things out
I think I need some better cooling, lol
There are a lot of cool cooling options out there
yeah, I have decided on some a few times but so much work 😛
I think I decided on the Hero Me Gen7
That is a good option
my decision before that was the fang or something but hero me gen7 looks neat
Petsfang is also a good choice
fast seems to introduce it's own issues
you using 4mm or 6?
you should try 6 before cranking up the speed
I printed at low quality 0.28mm at 120mm 🙂
it's for a AA battery holder and I forgot my contacts have to poke through
and they certainly do not
I just installed 8 1.92TB drives in my production server, thought of you @last cedar
That's pretty good for 120 tbh
I think I just fucked up by choosing 0.28 (low quality)
but some cooling would help
yeah, when I had the herome gen 5 I could print overhangs of multiple cm without issues
I could probably heat up these contacts with the soldering iron to poke through
meh, I don't want to play with hot pokey stick at the moment
is that the wiggles
I was confused at first, there were just 4 men before
I didn't realize it was a blueman group type thing with different members over time
I think the red shirt guy has been there always
then I don't trust him
bootleg adidas
I returned a neighbors dog earlier when I noticed it loose on the cameras. I was trying to figure out how it just appeared out of nowhere but it actually came running from the opposite side of the house. They went on quite the adventure.
Yeah, my neighbours dog also runs away every few months
I go out and yell at him
and he runs home to mama
I went out there and she was very happy. I was like, "how did you get here?" and they showed me a secret path between our fences, lol
"BOLIVAR GET THE FUCK HOME" stares at me runs
she was trying to get home but couldn't get back over the fence
watched that linus video?
the owner was like "She has been getting out but I thought I figured out how"
Oooh, very nice, what will you put on that, all your raccoon pr0n?
This is still one of my all time favorite stand up shows even 22 years after first hearing it
Including the song "Ass-Hole"!
NO COPYRIGHT INFRINGEMENT INTENDED.
All content belongs to its rightful owners.
Not for monetary gain.
For entertainment purpose only
Any spotify AI playlist generator recommendations?

👆 link does not work ☹️
sorry to hear it. have you tried cialis?
Shes left now
I'm a dummy. I waited for what I thought were 3.3v regulators but I ordered the wrong thing. 🙂
what did you get?
5v step up with a million things in the name. I need to read better.
heh; can stil be useful though
whoops
tons of stock
maybe you wanted step down
whats the chip on it?
on the back
3 pins and a tab
could be that you could change the resistors to set a diff voltage
so yeah whats stencled into the chips
nothing on mine in person. I linked you the listing if curious but I'm not modifying these
lame
I need to print the rest of the box I'm using to see if I can fit 4 batteries in there
I probably can
are the scotts about to lose the ability to have their own private cars?
Huh
If your name is Scott you can't own a car?
All amazon component descriptions are always written by IEEE
only on every second Sunday
Doesn't look like they're banning private cars? They're just wanting things within a 20 min walk or cycle, which sounds great
Same with rolling out PT
nah there are videos on it where they are wanting to eventually prohibit private cars
even that article i linked kind of hinted towards that
think that article though touched more on the removal of parking spaces etc tho
And that goal will most likely never be reached. An idiot would know that
Reducing the number of cars, and encouraging people to take public transport is a smart idea
Or just cycle/ walk
If you can get to what you need then you really don't need a car. Just rent one for the times you do need
removing freedoms is a smart idea? wut?
They're not saying you're stuck indoors?
exactly what the videos were sounding like
You're free to go places, just avoid using cars
As I said, if you can get to what you need normally without a car, then rent one for the times you do need one
A car isn't your only way to move you know
You have legs
also, do so by making the alternatives better, instead of cars worse
you would support the removal of the ability to own a car lol
You assume that the clichée american lard bucket can walk 😉
Its cheaper, and easier
thats you
thats a lot of people
don't enforce that on others
I love driving, if I needed to drive just rent a car
Or ultimately, just reduce a need to own a car and people would get rid of them
most people in cities really don't need cars
Which this seems like it, enforcing the ability to have things within a 20 min walk/cycle
Only reason I drive to work is because I'm lazy and want to sleep an extra 15 min instead of spending that 15 min on a bus (plus I usually give a colleague a lift home on the way back too)
yea, I'd still keep one around for weather reasons. And potential of being slightly under the weather
but I avoid using my car for trips within the municipal area either way
Whenever I go to the city here I either catch the tram, or ride an eScooter lol
Both get me in easily, and I don't have to find a park
I tend to park on office spaces when I'm in the city outside usual business hours 😂
they should convert one of those small islands that are uninhabited and just ship the non drivers there lol
just need to know which parking spots are "free" to use
Most of those here are still paid during the day, or are behind a gate
I just use the ones of my current and former employer. Or a friend's company
they only gate them here when it's proper car parks. Not for only a couple spots
We're not saying you have to be a non driver, just that if you have shops a 5-10 minute public transport ride away or a 20 minute walk why not walk/ Public transport. Especially when the time savings from driving usually get wasted finding a park
Ah nice
according to that plan in sccotland they would remove all ability to have a car, as in no parking spots or anything
you just gonna have a car sit in a garage and rot? lol
in essence they are forcing an ability out
The article you linked just said they would reduce the carparks where they could
it was just the start
lmao
inner city car parks are kinda silly either way
Americans and the constant thinking of 'its just the start' and the hate of government
good park&ride setups are better for all but a few businesses
Especially given inner city is usually where the PT is the best
american's? it's the locals who posted the videos I watched complaining about it in the exact same why I see it rotf
and those few should invest in better delivery setups to reduce the need to lug around their products as customer
The article you linked was all people overseas complaining
But also you know politicians would push. Doesn't mean everything would be rolled out
well, actual centers are pedestrian areas either way 🤷
Sonoma genuine question, if you had a supermarket a 5 minute walk away, would you walk or drive
Thats true too
i would drive. no brainer
The fuck
Walking would be so nice if it was that close, smell the fresh air, do some exercise, etc
it must be nice being single only needing only a small bag of grocerys once a week but family's can't do that
I can carry 3+ bags of groceries myself
uh huh
so your the dude who had cans rolling across the road from the bottom of the bag falling out
Bottom of the bag falling out? The fuck are you using
We have the fabric bags, reusable and strong
American quality products
like i said, ship you to the island lol
I am on an island
I have also said I still like driving
I will drive if I'm lazy
But if it was 5 mins away there would be little point
Be quite excessive
Yes have choice, but make it better for walking/cycling/PT
Because guess what you can encourage people to not drive
removing any place to park is removing choice
people don't realize how annoying driving is for short distances until they have alternatives 😮
Okay they can keep 5 carpark spots
Keeps parking an option
Make 4/5 disabled spots
Theres choice 
tell that to the scotts
Hot take: Getting riled up about what another country might do when it has absolutely no bearing on your life is pointless
exactly
Limit spaces, not remove
as i said, it's the start
Its funny seeing sonoma riled up by how people in a country he doesn't like might not have driving lol
or atleast thats what they say
how am i riled up?
i'm not the one jumping the bandwagon to support the idea then back stepping lol
And it really most likely isn't. Considering people from outside scotland (like england) may want to visit too
Sonoma we all know you would love to drive to your next door neighbour if you visited. Don't worry
wut?
I think that would be a reason to make it harde,r not easier from a scottish perspective 😉
soo, ical is driving me crazy. Does anyone know how to get ATTACH working with it?
Attach?
I'm looking at getting a Super Feeder to replace my PetSafe Smart Feed, I was thinking I could just get the Super Feeder, chop up the input cable, squeeze a Shelly in, and boom instant wifi smart feeder. It's just got one of these cables for power input:
so i was thinking a circuit like this would work for what i'd like to do:
of course replace the battery with the adapter like stated in the asterisks in the photo
would this work, or should i just get a wifi plug and use it instead
Both will work
The former less effort
But with an esp you can add features
Like weight of bowl
Or camera
Temperature
i think designing an esp system like that is beyond the scope of what i'd like to do, all i need is the same thing that my petsafe does already: feed on a timer with occasional remote manual feeding as well
just local control and not trying to phone home
You can make the PoC outside of the feeder itself and then implement it at a later point
true
dosen't it already have like a timer built in?
Yes, I want to create events from a website I scrape and link to the event as attachement
And support seems to be spotty
between fastmail, Android's calendar app (Pixel6) and Morgen https://www.morgen.so/
no
i think there's some kind of built in timer circuit to prevent duplicate signals, but no built in schedule or anything
it's meant to be used with an external timer of some kind
i would just use a smart plug. they even say that on the site
would be the easiest route
yeah i know that would be easiest, and shelly also makes a smart plug, but i was just wondering if using a relay as part of the dc input to the machine would be a cheaper solution
shelly's smart plug, at least, is more expensive than their relay i'd be using
so don't use the shelly smart plug. there are tons of options with smart plugs
the hopper on that thing is super simple, one could 3d print extensions lol
right there's tons of smart plug options or the option of just wiring the relay straight into the power circuit itself
your running HA right?
yeah
I will say the vice president of that company looks like a child sex offender
exactly, smart plug + ha = smart functionality
right, or relay + ha = smart functionality too
all my question is is if this circuitry would work for an DC adapter going into the machine
shelly relays are just the same as their plugs
actually more capable than the plugs
if your talking about like a shelly 1pm
why would you mess with that when a smart plug does the same thing and is easier?
this lol
a shelly 1 non ul is $15
smart plugs can be low as 7 bucks
do what you want, but the relay route just seems extra work for no gain
i mean the gain for me is that i can hide the relay somewhere rather than have an ugly extended wall wart
i dunno that bottom compartment looks kind of small
not sure if like a shelly would fit
width wise sure, but depth
maybe not fitting into any compartment of the feeder itself but having the option to put it somewhere on the cable rather than having a wall wart coming an extra inch away from the wall
i mean it wouldn't be exposed
i'd wrap it in something
or 3d print an enclosure to snap around it
sounds like a fire or electrocuted cat story to me lol
right... because consumer electronics aren't literally just wires in enclosures
Disappointed you didn't say electrocuted raccoon, but also slightly happy
Hey, some of it is semiconductors, not wires
fair enough
if you really wanted to go the relay route, it seems both will work, I would suggest a shelly 1 in 12v dc over the shelly 1pm if it's going to be mounted externally
well, I think it might be arguable to call traces on PCBs wires. Even if they have the exact same function
yeah shelly 1 is what i was planning on
you would just hook it up normally. the machine and the shelly run off the same so using the O to power the machine is perfectly fine
|| electrocuted racoon ||
crazy just how many parts on that machine could be 3d printed lol
Bad idea
Very unhealthy and uncomfortable
See, comfortable
and doesn't put any stress on knees and ankles
seconds per Italy of course
Blame it on Südtirol
looks at wikipedia
oh, Südtirol is one of the wealthiest ares in Italy. And wants nothing to do with the rest. I wonder if that's related
drunk discording again?
yeah if there is something with world cup or soccer they are a 100% italian breed
everything else: no relation to italy at all
only because you Austrians aren't ever relevant 😂
my girlfriend lol'd at your response, she's südtirolerin
I'm still for Bayer-Österreich-Ungarn 😄
Searching for espresso in NJ at 5:30 and disappointed
have you tried WaWa?
think thats the name of it
when i visited a friend there we went to this gas station called wawa that had a 24/7 deli but they had like all kinds of shit
aside from that i didn't think NJ had too many 24/7 places unlike NY
Yep
coffee is gross anyways
For once I agree with Sonoma
yep, this is tqdm
if you don't specify a unit it displays "iterations" because that's literally just what it's counting
just toying around with this
https://github.com/brycedrennan/imaginAIry
I find the requirements funny
A CUDA supported graphics card with >= 11gb VRAM (and CUDA installed)
or an M1 processor
no need for a >11gb vram cuda gpu
thats not the same
and I don't have a 11gb vram gpu 😂
just a 20w apple boi
Pathetic
who else wants to introduce themselves to us in a single word?
That low power boi apparently beats your ancient processor because requirements 
I'm pretty sure my prod environment is better than it 😂
COME AT ME
I don't think I'm allowed to run a VM in prod D:
I'd have to use cloud for that
actually can 😮
but not your i9 😄
what i9? 😕
we have GPU nodes 🤷
yeah, I know. but at this point you compare with a laptop 😄
We have chromebooks D:
... which apparently goes out of scope for this task again
npu's
I think my phone has some 😂
and meteor lake is postponed 😛
is that the next intel arch?
first to feature a neural engine yes
Sapphire rapids is gonna be nice
Its 2030 when you upgrade to that 😂
psssh
as if he'd ever give up on his ia64
I realized one of the models I was trying to print has floating parts. I went to fix it in fusion 360 but the tutorials from the autodesk site don't match up with my program. 🙂
What are you printing?
Intentional floating parts or accidental floating parts?
a battery box foe x3 AA's. I went to use my "step up" converters with x2 AA batteries and realized the "step ups" were for 5v but I have some 3.3v step down from something prior so going to get x3 going 🙂
accidental. in the remixes too. 🙂
I was wondering why it was printing so dumb and I looked real close and it's floating
Printing battery boxes 🤯
Sorry, that makes very little sense. Unless you had some weird arrangement of the batteries. Printing 5 for $0.50 item🤔
wat
Yep that's what I said when I saw that.
" Printing 5 for $0.50 item"
Those battery compartments are dime a dozen on tao
yeah, why would I order them if I could just make them in any arrangement I want as needed?
it's already here, why wait
this is a test for before I combine the model into a full model where it's combined with other stuffs
I always print the individual fit pieces and then I combine so I don't have to print the whole thing just to test
how the hell did this not hit the west coast first? https://gizmodo.com/super-gonorrhea-detected-massachusetts-united-states-1850012423
I used to be all into 3d printing, had/have multiple printers. I think hands down the biggest waste of time in home DIY items. Unless a quick prototype for some final production item, valuable time wasted that can be used to think of some interesting automation or new product.
Looking at my prints from 3 or 4 years ago, what a waste🤣 never pleasing to the eye, outdoor ones not lasting, deformed on Z axis lmao. Yep, never again.
the invested pain of how much they aren't simply plug and play isn't quite worth the value
💯
so now I want a CnC, that's clearly different. I bet!
Always retail. Always.
I don't understand why they aren't more plug and play
alot these days are
From this channel alone, it seems like there's a horrendous amount of screwing around to get what you want and keep it that way. I guess that can be interesting and fun, but it seems tedious for known materials
well up till this year or last year they were less plug and play
There are very good click and go one. I am talking about the actual 3d printed crap, yep crap.
What are you talking about last year?
and yea depending which one you get they do have to be fined tuned. spent a super long time with mine but it gave me so much better understanding how it all works in the process
the amount of models that have ABL and are pretty much much already together out of the box etc
Lol
ABL is ages old
I had to assemble the ender 3 from little pieces
maybe but for some models it eliminates one of the hardest procedures for people to get right
especially since more and more are coming with fixed beds
I am not talking about printers, tech or printing. The final product is crap. No matter what you print with even if you are God level super tuner with 0.0001mm bed variance. It's just doesn't look good 🤣
when did you become such a downer? you sound like me refering to other shit lol
really it's for proto typing and stuff you don't see
You are telling me you will print something and leave it in the living room? I mean really?
I haven't made anything decorative yet, but yea, why not? there are means of removing layer lines etc if that's what you dislike
Ok then. More power to ya!
i got mine to make little things that I wish i had one prior for all these years lol
could care less about vases etc
I could go at it but....🤣 it's ok. I want you to be happy making those little things, 'instantly' 👊
I fear that my main motivation would be this:
I enjoy tinkering
and I already have plenty of opportunities for that without creating a new one
some very strange takes on not enjoying other peoples hobbies, lol.
it would just be yet another thing taking up space that I feel like I should be using
@tidal bronzewhat were expecting to print?
i came into this full well knowing i'd never print anything decorative with it
I would rather stay away from this 3d printing subject. After all let the professionals handle the tough subjects.
uh oh. something go horribly wrong?
Never, just took longer to realize
told ya years ago to send me your machines but you refused lol
I have 2 left. 🤣 Using as a windex and 409 trays in the garage.
well see, ship em out. i'll clear that space for ya lol
Come on now I can't miss out on the street cred. Gotta show friends I have this florescent orange color 3D printers 😜
pretty sure once they see the dust build up the jig will be up
i picked the wrong room to house mine. no clue how the dust builds up on the rollers so fast
I must say Prusa never gave me headaches or wasted time on tuning. Enjoyed printing. Don't even remember the few printers I has before that. They were clearly not fun.
they also weren't/aren't cheap
my prusa is making me some troubles. something is wrong with the extruder, so it's been collecting dust for way too long...
need to invest time at some point, and never felt lik eit
They all end up collecting dust. Just life.
just watched a video the other day were a dude was warning people not to think they could go into 3d printing selling stuff since it's so mainstream now lol
Hello, could you help me with a problem in node red? 😭
at the last Maker Faire there were so many tables of people showing off 3D printers or whatever they had printed
Been to few of those.
then it stopped
Yep. 😆
with the exception of like Tubez making cases for those zigbee controllers he sell, youtube video will be the only other real means of making money off 3d printing lol
There's that.
I got one of these and the guy 3D prints the case: https://www.beanvibes.com/products/the-accountant
seems like a reasonable use case
it does show that they are printed
exactly
IMO it can work well for smaller things. I got 2 stands for my old gameboys printed
Dude!!! Don't tell me you a fellow batista @static schooner
That is one of my hobbies, although I have enough quality stuff that does what I want that I haven't messed with it in a while
I completely disassembled and replumbed an E-61 machine to work off a rotary pump
I'm enjoying Caffe Lusso right now
some of it was by necessity, as some machines need more TLC over time
medium to dark, depending
this for pourover (v60): https://caffelusso.com/collections/single-origin/products/ethiopia-sidama
stained teeth talk. time to find lunch
Do you work with milk alternatives? Or just heavy and half heavy?
I also like Malabar Gold from Josuma
that's definitely on the darker side
just whole cow milk
you throw entire cows into your coffee?
I have big cups
Better not be unpasteurised or the feds will come for you I hear
Shipping is fast enough, and I buy a bunch and vac seal in mason jars before freezing in a chest freezer
Four roses is great, and Costco has it
I rarely drink bourbon but a collector, so....
there is a person on the other side taking a picture of you
They're in the house...
Wait what, you have matching faucet handles
I have the same bar sink 😀
But it's really nice to have a wet bar for this stuff outside the kitchen
I'm pretty much at endgame espresso machine and grinders at this point
The faucet handles looks like a portafilter handle. 🤔
I can see that. Very impressive. I am sure you are subscribed to "that channel"
Which?
Well there's only one for endgame baristas, come on now.
I think the best so far, Aldi branded machine review.
Was just using his pour over technique
Nice. Not into pour over, not enough time.
wtf am i reading here lol
don't you boys know you can just pull through mcdonalds for coffee
The Technivorm can make a roughly equivalent cup, but I find myself wanting to micromanage it
Micromanage things? Who?
I hate ATL with a passion. This was made just for turbulence 🤬
The water distribution, grounds wetting, etc
It's great for spitting out perfect temp water
Didn't have my flat white today and dying for one.
Nothing wrong with MCD coffee. Food well......
you don't like chicken nuggets?
i guess in california they probably offer kelp nuggets
nice, bought a lidl zigbee bulb today in sweden
quite good RGB for the price
better than tradfri
which one's lidl? Tint?
Few times a year, like them with tangy bbq
Charlottenberg or Karlstad?
Charlottenberg

But the other one there had a woman with a wonderful dialect, like nothing I had ever heard before
I once drove all the way from Eskilstuna to Karlstad, a single cable was loose 🤣 10 minute job
No no more like Östgöta dialect
I drove from Oslo -> Kristiandsand once to replace a powersupply, on a sunday
that was good overtime
@last cedar which raccoon pulled the cable?
Cedric, I gave him a good talking to, saying only to bite the cables that said Cat 5e on them
I bet!
I don't appreciate your attitude towards 5e.
5e for life
@clear ferry passing by your favorite...ATL 😀
I just discovered the lifepo4, neat
wait until you discover LTO
Everyone loves a good tape drive
Deheck
Ohhh
You have the rats nest, right
I have this snap on covering that makes me look good
The Alex Tech split sleeving is made from Polyethylene Terephthalate (PET). It's split and easy to load wires, no need to consider the size of wire connector plug. Wires can go out at any position in the sleeving. Our wiring loom is used in wire wrap wire protection of a wide assortment of wires ...
it gives things a bit of stiffness which is nice. 😉
Stiffness can be problematic 🤣
there is snow inbound. my dog is going to be very displeased.
another story with details you don't want to share?
I can share
|| my neck and shoulders are really stiff after being in a car accident and getting whiplash ||
And now my knee is also fubar'd
I have got really old in 1 year
Almoat as old as @clear ferry
I got rear ended at a stop light several years ago. my neck has been aching since. i go to a chiro every so ften which helps some but never clears it
I am really sorry about that, even if you do dislike raccoons
it's not cancer lol
I can't look more than half way to the right, neck is always stiff and hurts in certain positions (sleeping in any position due to lack of movement, it also caused migraines quite often), shoulders are stiff, I have lost feelings in both hands quite often, I fell off a ladder twice from lack of feeling in my leg.
LIFE IS WONDERFUL
So doormat stealing is about all I am good for
don't know your age but is that partially arthritis or something yet to look forward to?
Unless people start building platforms for doormats that involve me climbing
I am 36, and built like a lumberjack, so I would hope that arthritis is a way off
and btw here in the midwest, people just tell you to shrug it off and get back to work lol
Yeah, my sister-in-law was involved in a crash that caused her spine issues, and it took years for her to recover enough that it doesn't impact her daily









