#the-water-cooler
1 messages · Page 10 of 1
Something is not right.
the upstream flag is not set on my wan. none of the guides stated to do that.
you complaining someone else is spending time messing with something OTHER than cooking gross food like you all day?
Didnt get to cook for 6 days 🙁
sure your neighbors downwind are thankful for that
"Marge, the neighbor is burning seaweed again!"
Doesn't all of california smell like burning these days anyway ? 🤔
that's ok, i'll still invite ya to dinner anyways 😉
Forget the fires, how's that hot Krone doing these days 🤣🤣
Only? Nothing for us?
Krone is doing fine, if only the dollar can get back in line
😀 Little boys and girls can surely dream
sooner she gets over here the sooner there will be dinner for others..
Well at leaat 0 net carbs.
As dinner, or to dinner?
I eat anything 🙂 apart from pineapple. On pizza
No pineapple 🙁
in a fruit salad, perhaps
Pineapple is good with anything
We can argue if it counts as a pizza, but it is damn delicious
Do you guys get any good fruits in middle of nowhere?
Looks like this
So no tomatoes or chilli on your pizza either then (both fruits)?
I'm selective about fruit on pizza
Me too. And pineapple is a great selection for some combinations.
Pineapple Onions Jalapeño = 😋
Yikes, haven't had pizza since last year. Now this makes me grab a slice. 😀
I hope we can all agree that watermelon has no place on pizza
Phew, watermelon
Watermelon and pineapple yep
Strange that some are forced to eat stuff that they don't like. 🤔
you referring to your dishes that require water but since there is none you eat dry?
Seawater is preseasoned
Pineapple on pizza can't be a problem.
Who wants to eat a blob of gluten anyway 🤣
FTW
leave it to cali's to destroy everything good in this world
We have big hearts ❤️
Give it 23 years, you will find them in KC. I
what you talking about? we already got trash cali's in KC lmao
I found my next HA box
Kekek
I haven't had issues with my Hue bulbs. I had a WiZ bulb that the red channel keeps flaking out on but it started doing that right after I got it so I was able to exchange it.
I have a Hue bridge I rooted so I could poke around on it, but I don't use it anymore.
It uses mqtt on the hue bridge for ipc, but doesn't actually expose it outside the device at all.
Yeah, i retired all my bridges and been running zigbee2mqtt for three years
I went ZHA because my thermostat was incompatible with zigbee2mqtt
I preferred Z2M's interface for managing things over ZHA's tedious way of doing things.
I have a Conbee II for my adapter. It's worked well so far.
I've been frigging around with lasers. First project https://imgur.com/a/s0YX22U? Needs another coat of stain.
Why Google TV no come with ethernet
Wifi works fine for majority of users
If you really want/ need it, $30 gives you ethernet https://store.google.com/au/product/chromecast_ethernet_adapter_gen_2?hl=en-GB
Attach the included USB cable to your Chromecast, run a wired Ethernet cable from the router to the power supply and plug in – it’s just that simple.
I like my Google TV Chromecasts
Infinitely better than the smart shit that Samsung puts in Tizen.
It's just a bit mental to pay $30 the cost of a device to add ethernet in which used to be supplied
I can assure you a lottttt of people have problems with wifi, plus we should save the spectrum for things that need it like mobile devices not 75" TVs
That's an unfair comparison, the tizen stuff is like a poor hotel tv of the 90s
Utter garbage
My LG os is good
My 2016 LG was good for 6 months, then i replaced it with a roku, and then with an apple tv
I don't use anything except the LG apps on the main TV
You can just plug in a generic rndis usb ethernet dongle into an LG TV too
I have an Apple TV 4K not plugged in
My LG has an ethernet port
Do you mean Google TV?
Nah, I meant LG ones. The built-in ethernet adapter on my LG C1 is 100Mbps, a USB one can get ~300Mbps over USB 2.
Hmm I've never checked the speed on mine
I was trying to play some dolby vision sample files and I was hitting the bandwidth limit.
100Mbits is heaps for content distribution though
Yea, I've never come close to hitting it under what I'd consider normal use.
A chromecast or similar device is basically a requirement for Samsung TVs.
My friend's cheapass $200 TCL TV with Roku built-in has a way better OS experience than any Samsung TV I've ever used.
The only thing I'm missing on LG is google casting
But I've had no complaints with the Plex, Netflix, Prime, Disney UX
I have a PC on my TV, I use that for almost all of my playback.
Chromecasts shit me off though. No power saving is ridiculous
One of the largest tech companies in the world with billions of devices doesn't take responsibility for their TV devices to to save energy
how much power do they draw?
1.2w too much!
damn
Like 1w at idle
I don't see the problem then
They max at like 3w during operation
that's 10 times .1W
It's also 1/10th of 10w
must be a luxury item
A chromecast at idle would cost me like $0.06/mo
my LG's ethernet port is solely saturated by streaming the image to hyperion
It's not the chromecast I care about it's the TV
Every other device I've used complies with Energy Star and doesn't remain on indefinitely on idle
They'll either shut themselves off or disable the video signal and then the TV will turn itself off
Lets say 100M chromecasts, leave a 100w TV running 2 hours a day longer than a compliant device would
That's 20GWh a day
Just a shower thought: With all the different tools around (home assistant, node red, openhab, just to mention a few) and even more devices/systems for which plugins are needed for the respective tool, have there ever been thoughts around standardizing those plugins? Today, we're duplicating that work across all the tools and in the end it seems there's always something that works here but not here or just the quality sucks or whatever. If we'd just have a little microservice with a standardized REST API for each device/system (hue, knx, etc) with a standardized, I'd imagine everybody to benefit from that.
But it's a "standardization" that is very tightly bound to HA as a software, hence the problems I described above. It would be nice to use standards when standardizing something 😄
And it would also make contributing simpler. I don't need to understand all the mechanics of HA/Node-Red/OpenHAB to add support for new devices. All I need to know is something like REST and what the contract is and I am done.
To make the integration all you need to know is python
And then you can do whatever you want after that
Nest mini idle 2.8w, interesting
Why limit potential contributers to a language?
Why make them set up a whole dev environment for HA when a small tiny standalone service would be enough?
Pretty much anything can be integrated with Home Assistant via MQTT. That's as close to an API as you will get IMO. See e.g. Zigbee2MQTT, EspHome, Plejd2mqtt, Tasmota, MySensors2mqtt, WLED... they all use or can use MQTT to communicate with Home Assistant.
And that's just the stuff I've personally used.
Octoprint
A half-finished RFLINK2mqtt project I have laying around somewhere
AutoHotkey
Lmao knew it was going to be that one
That one and 303 are probably the most useful ones.
The one about breaking cryptography with a wrench is also always a good reminder
Dude all you need is a 7 dollar adapter
I haven't tried it. Presumed it would work, but that's their official solution
SNANSHI Ethernet Adapter for Fire TV Stick (2nd GEN), Chromecast, Google Home Mini and More Streaming Sticks, Micro USB to RJ45 Ethernet Network Adapter with USB Power Supply Cable https://a.co/d/0PC8Var
That works perfectly fine
Works with wyze cams too
It's an 8 dollar adapter now.
Still cheap
https://github.com/netham45/esp32-menu Pushed the updated code for the eink ha remote I'm working on.
Still far from done but legitimately usable now.
Not without the modified libs I'm using though, I guess.
I actually saw a man with a truck today
Dodge ram 1500
Yet, he had a hitch to carry his goods
yikes
my brother and i carried 250kg of batteries with his 110ps wagon last weekend
going 180 on the autobahn with that was fun
a truck will likely never hit such speeds even empty
I do enjoy the Volvo, I picked up a closet that was 220cm and still had room for groceries
And both kids

Imagine enjoying anything Swedish. Shameful
But Volvo is Chinese
Does that make it any better 🤔
Yes
Chinese vehicle quality is quite good
Tesla quality doubled when they moved production of the 3 to China
those children hands really make great cars
with Tesla's standard of just not fitting a finger between adjacent panels, the smaller hands lead to better quality
Sounds like more and more Norwats are becoming educated on just how good american trucks are. World peace may just be around the corner
Still didn't use the bed, and had to haul a hitch to carry 5kgs of pipes
Might be brain damage
maybe the pipes were longer than the bed?
maybe the trailer was preloaded and all he did was hook up to it
all kinds of reasons to haul a trailer with stuff rather than just chucking everything in the back
They were not, and it was not
how do you know? was this person your uncle?
No, i watched him load them up and strap them down 
so, stalker
maybe his back was aching and the height of the truck would have been more pain
He looked physically fine, but I can't speak for his mental health
After all, he was driving a truck
I think jealousy has clouded your judgement
he probably drove past you when you were stuck on the side of the road with a dead battery
Good thing the supercharged and turbocharged engine takes over when the ev battery is flat then

super- and turbocharged? man that must be charging the ev battery at least twice as fast
Yes
A or B? (Yes I’m getting a replacement lens, don’t buy used projectors, unless they were $5 like this one.)
B
Anyone who works with .NET core have any opinions about the whole NET ecosystem
Not the trash .NET framework
The BliKVM PCIe lets you put a computer in your computer so you can control it from any computer.
Currently it's only for sale via AliExpress: https://www.aliexpress.com/item/3256804386522898.html
My other Pi-based KVM videos:
- TinyPilot and PiKVM v3: https://www.youtube.com/watch?v=TIrkEr2AeDY
- BliKVM: https://www.youtube.com/watch?v=3...
My team is a Java shop but anyone I’ve talked to on the other team next to us working with .NET/sitecore/the whole .NET ecosystem loves it and you can’t pry them away from it. The older people on that team don’t wanna create their new apps without it. It’s funny that each person on each team wants to stick with either their Java or MS ecosystem and almost feels like they hate the other. Pretty funny to observe as I’ve only been a dev for 3 years now. I know that doesn’t answer your question but wanted to chime in @hushed basalt
That's an interesting perspective
I've been working on Java 8 greenfield the past year but it's been frameworkless and microservices
So not fun
What ecosystem in Java are you using
one thing my team does is package and distribute JDKs, only some of our projects are Java 8, some very small ones are 7, but mostly 11, with the move to 17 coming soon
i mostly just do things using Spring's rest template framework
so mostly just making new APIs integrated with COTS with Java. Doing kind of DevOps/Platform stuff. Gotten to do some cool stuff with Spring Boot here and there but we don't own any web apps
my god your literally everywhere. like how are you in every forum post
What's the current meta for cheap ass wall mountable tablets right now?
Galaxy tab a7 still decent?
Or is it ipad or die
Also why does apple make iPhone 10-11-12 etc but iPad has always just been iPad.
Like holy shit trying to detinguish generations is crazy
I'm thinking about getting the ali express "special" and just upping my fire insurance coverage
@low harness is omnipresent
I’ve noticed
Tab a7 lite is good, some Fire tablets are good.
Lenovo m7 and up are good
Do they have a good selection of wall mounts avail?
Truuuu
Ooh there’s a new 10.1” Fire Tablet
And it’s a fire tablet there are lots of mounts.
I can control my TV and my lights now, also got icons mapping correctly.
And my phone still can't upload a photo oriented correctly
Dont those come with advertisements unless you pay for a certain type?
Also can you get Google play store on it?
Yes and Yes.
Yea
And it runs android, you can get rid of the ads easy peasy.
Do you have a windows PC?
It's a 7 color eink screen
Dude that’s awesome.
Of course, like Jesus intended
5.65", it was around $70
FireToolbox.
That entire unit is only about $100 in parts
Hey I don’t own a PC am I sinning?
Your fonts need anti aliasing 😄
Also, want to help me unsin and send a PC to me?
don't worry, I don't have a windows install either. And sinning
True
Oh carful what you wish for, I have a netbook running windows Vista sitting in the corner of my room
No I don’t own a computer in general.
Yes.
You guys remember when netbooks we're the shit
I had a netbook in highschool
are you one of those calling apples not computers, or tablet computing?
well no I technically own a laptop but the rpi 3 that runs home assistant is faster
netbooks are cute. They only need a wrist strap so you can compute one handed on the go 😂
I don’t have a Mac, just a tablet and an iPhone.
I used to carry it in the pocket of my hoodie
wouldn't be able to patch HA on a tablet 🤷
You may be asking: is it a pain to setup home assistant from a tablet?
Yes. Yes it is.
They took ABUSE my guy.
And they were all using sealed nicad batteries so after a year you're fucked unless you keep it plugged in at all times
It basically turns into a desktop after a year lol
Honestly I wish I'd gone with a nice 16 shade grayscale one. The color screen takes 35s per screen draw and doesn't support partial draws.
I’ll probably buy a MacBook Pro soon just gotta save money or smth.
I need to find some 20€ ebay deal on a tiny chromebook...
Used surface pro laptop
Unless you NEED osx
35 SECONDS? Not Milli?
Get some proper hardware
Yea, 35 seconds
Buy a raspberry pi
Ah yeah that's where the price gets ya
what's that branch of masochism called?
I’ve thought of that, but I do kinda like OSX, along with the form factor of MacBooks.
Idk maybe.
That’s a higher price lmao
I think there a pitop kit somewhere you can buy
Crazy energy efficient
Hmmmmmm surface pro might work.
I probably would go with a grayscale one if I did it again. Some of those can approach 5fps for partial refreshes.
Granted if you get a pitop, I may personally bully you about it
But I like MacBooks. Apple integration is nice, can technically dual boot windows if needed, and I like the touchpad.
https://www.youtube.com/watch?v=pjiSGm-cdo8 I recorded this right after I got it when I was first getting things to draw correctly
Apple does have the ecosystem for sure I will give them that
Right? Like I might get a MacBook for three reasons: Ecosystem, Touch Bar, Force Touch.
(Yes I know I’m weird I like the Touch Bar.)
While you're waiting for the next screen to load you get to have a free disco time
Put it in and epileptic's house and it's disco time all the time
Right now it's just waiting in a loop for it to finish drawing so it can power down the screen, I'm going to change it to trigger an interrupt when the busy line goes low for power down so buttons can be pressed while it's drawing, but I haven't got to that yet.
If you swap it over to grayscale does the load time speed up?
This screen is only color
Very satisfying.
It does the full color refresh every time even if that color isn't on the screen
Oh gotcha the only time I got to play with a colored e-ink display was on my pebble (rip)
God I miss pebble
They seemed great.
I'll never forgive Fitbit for what they did to them.
This is the only eink screen I've worked with. I used a kindle a couple times years ago but it belonged to my school's library.
If I didn't care about damaging it I could probably abuse the reset line on the display to get it to draw somewhat faster.
Don't you only damage them if they get too hot?
I’m wearing one lol.
God the Fitbit integration for home assistant sucks.
The manual for the ones that support it warns that if you do too many partial redraws without a full cycle they can burn in
Oh that's good that's exactly what you want
I see we're back to plasma screen technology now
Like all I want is my sleep stats in home assistant how hard is that
Full circle
The energy requirement of eink is a bit different than a plasma screen
My kindle is dead lol
Like the TVs in high school that kept a picture of a clock 24/7
No idea how to fix it.
Just a lil
I heard driving a screw directly through the battery helps fix it
Hmm useful.
now I wonder whether the TV that showed our schedule changes in school ever burnt in
Dude in my high school we had CRTs and they had fucking burn in
A CRT
Like how the fuck
I am permanently on my old schools TV.
yea, CRTs could burn in. Iirc literally as well
This is going to be pulling like 100 microamps total when in standby once I remove the power leds. Right now I've got it going to standby after 30s of inactivity and it seems to be working well. It generally catches the button press when woken up from sleep too. I get an interrupt from my touchscreen controller that
I came back to the high school to go train some kids a few years back and they had replaced them with flat screen LCDs and those already got burned in by like day one
why? Did it show people that should go to detention? 😛
They didn't even think to move the clock around they just left it in the direct Center of all the screens and left them on 24/7
Turns out, getting second place in a robot competition is good. (woulda been first if a teammate wasn’t stupid. I’ll never forgive you Gabriella.)
CRTs burned in easily. The phosphors would weaken after displaying a static image for long enough then there was a permanent dim spot.
I've never actually seen a CRT burn in before
I have
Dude I shot a stream of Apple sauce across our cafeteria and didn’t get detention.
I loved that school.
Well up until I went to high school
Old POS systems are horrible for burn-in
Back when they had CRTs at airports they always had burnin
smack a gogosqueeze packet hard enough and the lid turns into a rocket
A lot of my elementary school's crts had the login screen burned in to them
we got multiple pieces of cucumber stuck to the ceiling that nobody ever got in trouble for
fun fact: unnamed person, the astronaut, founded this school.
oh the irony.
The CRTs you used to see over the food lines at fast food places always had burn-in
ah fudge I mighta just doxxed myself
I can't think of any that still use CRTs though
I actually got to talk to said astronaut once. Very cool.
I watched The Magic School Bus on one in 3rd grade.
Sooo like 2018-ish.
I left college in 2011
Outboomerd
:(
I will say though the best / worst thing about being old is that I'm at the point of my life where I'm not sold that I need to have a family or anything but I'm not so young that I'm poor
So I'm in just the right spot to buy stupid amounts of home automation shit
I'm leasing two rooms of my house to friends so I've had a decent amount of spare money to blow on stuff too.
What? Did you start college late or why do you feel old when you graduated 2018?
Because Bagel was in 3rd grade in 2018
^
🤷 babys
The kids, they're advancing faster
Like shit that I went to college for for 4 years is going to be taught in his high school
Maybe even Middle School
I know they're teaching elementary kids had a code now which I really wish I had as a kid
oh right, I need to annoy some current students and figure out how much CS/programming they are doing
That's been a thing off and on since like the 80s. Commodore and BBC/Acorn had a big chunk of their business from schools.
We did some programming in secondary ed. It was good fun. A bit too easy though
Tell em to drop it and go into pre sales engineering.
You kinda feel like you betraying your professors but my God I wish they told us about this schools
D: pre sales
Yep I'm the one that every engineer that has to implement hates
We're like architects but slightly more respected. Like only slightly though
that's a bold statement
Heck ya
We actually respect architects ;'D
Have you MET an architect
yes
I'm pretty sure they all live in Ohio which as we all know does not exist
So by process of elimination
I’m not even out of middle school and taking a high school Physics class. If that’s true, then this is like 2nd year physics to you.
pfft, 'murican Architects. I thought they are all like Ted
Guess my age.
15-16
Nah 12 -14
inb4 ToS D:
14 was freshman year of hs for me
I can tell you, I’m joining a Cisco class. And I know Python and understand yaml. And how to y’know setup home assistant.
Bing bing.
Hopefully.
And piss off everyone else
Become a noc cave troll
Nah I’d rather do networking.
Yeah I started off the same way and then someone offered me a paycheck
Unless you're gonna go full in like ccie or ccda etc
That's an easy 200k cleared a year
Look I already know how to build an Etherkiller what else do I need?
You have a point.
But.
I like networking and it does pay well.
And if I get a CCNA by 14 I could go get a CCIE by 21.
I started the same way man I was boots on the street for 3 years at a local college being a sys net admin.
Moved to a reseller, and now I'm at a manufacturer.
I haven't touched my degree since
You will note though as you get hired higher into these jobs you need to make sure that you have hobbies because you get farther and farther away from actual networking
people use their degrees? My current employer hasn't ever seen mine 😄
I just designed boms now
I use home assistant and own a 3d printer. I’m good.
Can I talk to people on the phone and sometimes I travel across the country
And only provided it to the new one during the background check. Don't think I even told them before
Yeah what a load of bullshit they fed us telling us the companies are going to want to see our gpas
I thought that was fake!
Mostly
I had one company that wanted to see my GPA and they're starting offer was $27,000 a year I didn't even return their call
Talking on phones 🤢
ya don’t.
Sometimes we even have to use video
that’s like. barely living expense.
I never needed any certificate from 2nd ed o.0
There's hardly even a point to a degree in IT. It took me like 3 years of working here to get to one of the more senior tech positions my company has to offer.
Without a degree
honestly degree would just be nice so I can understand it.
I mind video calls way less than legacy phone
that’s like the only reason I want one.
Yep my boss at my college that I worked at was a groundskeeper at the college for 15 years and he became the CTO for the college
Your welcome, ongy.
Not only could he deconstruct a network but he could mow the shit out of a lawn and reinstall some drywall
Nice.
So do you know how to replace paint on a wall?
Certs don't mean shit if you can't actually do it which is why the ccie exists
Depends a bit on the company and how you enter.
In my position the degree is nice to have, but at the same time semi useless
Because my brother knocked my tablet off the wall and paint went with it.
Most of the stuff I work on day to day wasn't even out when I was in college.
I actually did this in college once at the end of the semester and our dorm room we would get charged if there was dents on the wall.
Obviously they were dents on the wall because we would take our mice and Chuck them at the wall at mach 10 after we got slammed in League.
So I took some duct tape put it on the wall and ripped off a sample of the paint and then I took that paint sample to Lowe's got it color matched got a pint of it and then proceeded to paint all the holes over and fill the holes with tape and then paint over the tape
It was truly a landlord special
My god it’s genius.
if that invalidates your education, that education sucks 😂
HEY WAIT A MINUTE
there's a reason CS is maths
netham what printer do you have
I have an Ender 3, why?
Yea, I joined but don't think I ever said anything in there.
Might have asked a couple questions about the mobo before I got my skr3
OpenRGB though 🙂
I should check whether it's sufficiently evolved to run as fan controller by now
Good job
hey do any of you people know of a smart box fan, or a way to make one smart (with like speed control)
I only really use OpenRGB to turn my lights off anymore. On the PC before this one I had a bunch of effects set up that'd just call OpenRGB over and over to change colors.
It starts almost instantly if you recompile it to only poll for the devices you own instead of all it supports.
The RGB controller on my new PC craps itself and goes offline if I call it that fast though.
Rig something up with a smart IR remote
Put three relays on the fan motor with a decent amount of resistance between them and the power source, each relay will add 1/3 more current to the fan. Select 1,2, or 3 relays for power level.
Control relays with an esp8266/esphome
I mostly used openrgb to read their fan control stuff when I wrote a small tool to control my fans
yes, BURN that energy
Yea, make sure you get chonky resistors. :P
Or you could go the reasonable route and get a transistor and control it with pwm to set the duty level.
explan
Control it with a transistor, control how much time the transistor is on vs off to set the speed.
that would require a chonk transistor though
For 120vac
Rember I am broke teenager
Looks like larger fans normally use a capacitive voltage regulator
the AC variant of PWM is also slightly different, as it needs to be synchronized with the AC frequency
Basically you want to limit the voltage to the fan
yes but then the current increases because frequency is the same
not good
I can’t find any lol.
yea, I was thinking more towards cmputer fans than anything plugged into mains
Hiletgo makes freaking everything. https://www.amazon.com/HiLetgo-Control-Regulator-50-220V-Adjustable/dp/B00LODGP2E/ref=asc_df_B00LODGP2E/?tag=hyprod-20&linkCode=df0&hvadid=198096195532&hvpos=&hvnetw=g&hvrand=12145611651687624615&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9029600&hvtargid=pla-351252383508&psc=1
afaik that's how light dimmers work too
oh yea, just try a smart lights dimmer :expanding brain meme:
pwm power regulation is fine
basically the way a box fan changes speed is it activates different wirings in the motor
so it gets mad when used with a dimmer
and I don’t think a smart variac would work
well, solenoids on buttons it is
maybe
So put a relay to each set of windings and control that relay from an esp
Or current limit it as well as voltage limit it
make sure to run current to all at the same time for a party trick
I wonder if you could put enough through them to blow the housing apart
how long does it need to update?
nvm, i saw it takes 30ish seconda
It's just under 35s from when I make the call to draw, which currently waits for it to finish, to when it returns.
Like 34.6s
great for using it as a clickable ui
I have a couple 128x32 oled screens, I was considering pairing one with it to show more immediate things
They're way faster
If I remade it I'd use a 16 shade one from the same company
Way faster refresh rate, supports partial refreshes
put the color one up for sale and order the grayscale one :p
I was thinking finish this one until I've done everything I want with it then move over to a grayscale one
I think I'm going to divide the menus up by room, choose a room and it'll give you the options for the lights, tv, air control, and whatever else is in there. My next move is going to be to make widgets, I think.
I need to find a nice LFF shelf, i might be getting 22 8TB drives
I want sliders for the colors for the light control for this one instead of just colored bulb buttons, I want a widget that queries info from HA and displays it with a timestamp, I want a keyboard/mouse page to control my PC with
mine is great atx, all my drived are just tossed into the case and hanging on cables
sounds like the old ipod style remote for HA be something you'd rather want to look at

I don't want something I have to charge every day
hm, that would actually be interesting. Having an oled that can turn fully transparent as upper layer for interaction, and an eINK that takes ages behind it for standby operations
I looked into that, I couldn't find a transparent one that was big enough.
Some people were saying you could peel the film backing off of one and have a transparent screen
I can't even find any transparent ones larger than price tags :/
I think the largest I found was like 1.8"
If you remove the film you probably can't make it opaque in software anymore :/
That many layers over the eink screen is going to make it harder to read too
use an LCD for that sort of stuff
Getting a screen where the pixels lined up right would be a pita
I guess it wouldn't matter that much if it didn't match 1:1
hm, the first two opaque glass thingies I found need energy to be transparent. so that would't work for standby operations
G'day, it's been a whille. Hope everyone is well and having fun!
Thought I'd try saying hello again to see if the message stays
why would it not stay?
Dunno....my messages have been......vanishing...
It's alright, I've a fair idea who it was.
Anyway, hope all's well with you
I've spent the afternoon working out why a tasmota gpo lost it's settings and needed reprogramming. I must have triggered the factory-reset through power off/on accidentally.
F
I unplugged my old PC I use as home server on accident yesterday. Because I was messing with the trunk of cables I managed behind it
It was me. I delete your messages 👾
Do you now?! 🙂
Oh no! That's a bugger isn't it. Did it come back up properly?
yes. first try it failed somewhere in boot. Second worked without an issue
next device I shoudl go for something reasonable and give it redundant power 😄
It's disappointing isn't it to see that boot recovery doesn't work when you are watching it.
As long as it works when you're not
which reminds me, I should scrub the ZFS for good measure
Good idea
but I'm pretty happy that all services supposed to autostart came up without issues
Always a plus! I have the odd 'have to reboot again to get it to work' happen and it's always bloody untraceable.
I hate unanswered things
Like why that GPO reset. I'm sure I didn't power cycle it 6 times in under 10seconds.
I would have been REALLY annoyed if I wasn't running TasmoBackup every night.
do these use the GTP2 image prompts to make images now?
select all rabbits swimming in water wtf
And as the same AIs are used to defeat captchas, that is why they are getting harder/weirder. https://youtu.be/ppM_7-uTH14
lol, TPB using CloudFlare's cache
Why is that rule? "It appears you've somehow managed to post a code-wall, our limit is 15 lines max" Because it makes is impossible to search for longer example code, which I consider a good way to learn form others that may have solved something I search for... Maybe someone can rethink this rule and make the number higher?
Before You Ask
[How To Ask Questions The Smart Way](<http://www.catb.org/esr/faqs/smart-questions.html)
Before asking a technical question in our channels, please do the following:
- Try to find an answer by searching the archives of the forum
- Try to find an answer by searching the Web
- Try to find an answer by reading the manual
- Try to find an answer by reading the FAQ
- Try to find an answer by inspection or experimentation.
- Try to find an answer by asking a skilled friend.
- If you're a programmer, try to find an answer by reading the source code
When you ask your question, display the fact that you have done these things first; this will help establish that you're not being a lazy sponge and wasting people's time. Better yet, display what you have learned from doing these things. We like answering questions for people who have demonstrated they can learn from the answers.
images of atx shitting? you in the wrong discord server you fetish freak
certainly me
Germany is infested with Racoons, to the point that some places where it is forbidden to hunt them are rethinking about allowing them to be hunted
Sounds like I need to go to Germany and adopt a cat
Maybe nein
once you started feeding a few of them you would end up attracting hundreds then the neighboring residents would deport you lol
that or you would have to listen to your furry friends got slaughtered just outside your bedroom window all night
there have been raccoons spotted near us
then they became racoon burgers
Just time for me to slip some into my pockets
You monster
you'll be fine
I just want to see you complain about stomach aches tomorrow
dates on stuff like that is usually a) because they have to provide a date by law and/or b) they don't taste as good after a while
i'm always happy to make a northerns life worse
The video of the swede that opens a 30 year can of fermented fish is priceless
He was disappointed that it was only water left
We had the Norwegian national dish of lamb in cabbage today
My stomach is probably fucked anyway
I do cook yes, I did not make dinner today though
Although, putting layers of mest and cabbage in a pan isn't very advanced cooking
I would still manage to burn it
I have managed to burn steamed vegetables
cabbage is nasty
I know you guys hate anything that resembles a vegetable
must be why we hate norwegians
@static schoonerThe LR4 comes with this plastic guard that's suppose to help keep the litter from being thrown out when they cover their business. the thing is a little too high and two of my cats wouldn't even use the thing till i removed that. just heads up
I wonder if that's the "fence" that they sold as an accessory for the 3
I got one, but haven't installed it
maybe, it's that lip thing that they have to step over
yea, i don't have that for my LR3
but the LR4 comes with it
it just snaps on and off
I moved the LR3 and showed both cats where it is. Hope for the best!
lol
LR4 has some neat features. just too bad thew build quality wasn't at least on par with the LR3
the sensing cat weight thing is nice tho, makes it easier to know what cat is using it
that will be clear to it. One of mine is barely 10lbs, the other is more like 20
20 lb is a small adult lynx
Apparently 17lbs is a very big Maine coon
My 9month old baby is 22lbs and she is chonky
8200 teachers on strike in Norway, give them better pay!
39000 total teachers in Norway, so getting close to 25% in strike
did you just start the new school year as well?
Yes
Go teachers!
Nice!
They've been on strike for close to three weeks
are they state employees in Norway?
At least they don't have to buy their own student supplies here, but they are definitely underpaid
At least the high school ones are state employed, unsure about primary school, but I guess they are
Apparently the average pay for a newly educated teacher is currently €53k per year
Higher educated ones have average of €67k
so the higher ed ones are roughly median pay?
huh, I found a page saying 660NKR I thought it's roughly 1:10
Average is a shit measure. Median is more accurate
Aye the numbers i gave were apparently median
Average and median for 400 fields of work
Average is the umbrella term over mean/median/mode. Though usually mean.
The amount of work teachers do is also not measured well. since the better ones spend quite some time outside official hours to improve their material
and the difference shows, when you find ones that still use examples in Deutsche Mark 😂
Yes, my mother has been a teacher for 25 years
She works a lot on evenings
With no overtime
well, if you were in the EU 😛
Not like the obligation to track hours deters those that already invest stupid amounts of hours now 🤷
nah, there's an old by now EUGH decisions that all work needs to be tracked to ensure fair compensation.
And it's slowly, very slowly trickling down into actual practice for member countries
laughs in 1m of evening work means 1h overtime
righty right. I'm interested to see how that'll be handled with my new work.
Old one just didn't track time so far. For better or worse
I track all my hours on a weekly basis
so you just put in 9h at the end of the week?
Which is great for showing both how well a worker is at WLB and how good they are at self study and doing profitable work imo
I currently do 8h a week minimum, 3 of those end up being self study it seems
Some weeks have been 13h weeks
Some have been 7h
8 minimum. Some are 7.
Well, my planned hours are 8
if you say so
I should check what the 2 Bananas I bought cost o.0
with the price on the entire basket, might as well be 10€
I was at the local farm yesterday buying vegetables
€30 for 9kg potatoes, 5kg carrots, 2 cauliflower, 2 broccoli, 2 leeks, 2 celery
so roughly through your garden?
now i can visit you 🥰
I've been to South Park.
Both the region with that name and the town the show is based off of
Ooh nice now I can find your house
#the-water-cooler user meetup at atx's
Hoppen is jumping?
"jumpybounce" pretty much
Hahaha
It's my daughter's kindergarten
What in the good Lords name
Lets commit crime in a fun and entertaining way!
education as well please
Do you add a cinammon stick when you cook a chili?
No
The best way!
an uninvited one
Yes and coffee and cocoa powder
Triggering my PTSD smh
i'll invite you to my house party
I merely kidd. We don't have house parties in Finland since it would involve meeting other people
my house party would be, everyone sitting in another room, doing stuff by themself except for the not that introverterted people who may be playing a video game together
I've been to multiple
Two in kouvola and one in lapparanta
are gatherings where you meetup to help eat someone's victim to hide the evidence considered "house parties"?
Das ist mein teil
Very random question, but you're the nerds I know... What would be the best way to log VPN connection being established, what happens to files X and deletions of those files?
Windows Event Viewer has some of that functionality but I don't know if there's an easier way
just watched a video where a gen z was trying to make an argument for everyone to get rid of the electric air conditioners and replace with wind catchers
cracks me up when I see crap like that
they're super smart
my suggestion, mind your own buisness
lmao what?
lol the wiki for gen z even states the gen compared to others shows a decreased IQ
let them keep their retardness and mind your own business, do stuff that is actually useful
sorry, forgot you were a gen z
If we can’t meme and dream why even live
My biggest issue with gen z is their 10 word lexicon
They all sound like carbon copies of each other
lol cringe
Fr fr no cap ong
sus
Fuckin lol
sounds like a potential global issue though. although with the planet about to blow up I guess it's a problem that will sort itself out lol
@clear ferry https://youtu.be/WBqGyf8eQVk
Using machine learning on some scenes (see pinned comment & description) we've digitally remastered the only known, low-quality footage of the Commodore 64 & 6502 factory production to better show how the world's bestselling computer was made! Check out http://PCBWay.com - great PCBs from just $5!
🙏 Become a supporter: http://patreon.com/perifr...
They can't help but point out others flaws, ignoring their own lol
My most expensve cm4 ever!
Why though lol
Dude I love ali express embellishments
600Db I think that like 3 space shuttle launches stacked
Actually wait it's log
That's like a supernova
This horn will literally supernova us
I'm guessing it's more like 60db given china lol
At least it doesn't seem to be anything sensitive has been taken. Will wait and see what else they discover
They only say how long the throw is, 1cm diameter at 90km at 1 lux still meets their advertising 
98000 watts.
Given 8kw per house hold.
12.25.
Shit I think this light just solved electricity issues for the rest of the world
Screw wind turbines I'm investing in this flashlight
Lol I don’t believe that for a second
They had root to what seems like.. everything
That's why I said will wait and see. They still gave uber a rude awakening even if they didn't steal anything lol
Torque Test Channel recently did a video on horns and had a discussion on what decibels mean. Just 310dB is enough to produce a 100ft tsunami and rupture eardrums at a 40 mile distance (not hypothetical -- this actually happened in 1883 when Krakatoa erupted). And, yeah, logarithmic. 600dB would be existentially challenging for the very planet itself, leave alone its inhabitants or even its atmosphere.
Mildly amusing, had a police officer just turn up on my doorstep. Apparently someone had stolen a motorbike and he was wondering if my camera caught it, turned out Frigate caught it 💪
and the audio from my doorbell camera even caught some of the audio
Hah!
I take it you live in a country that allows you film other peoples properties \ public roads then
Not too sure on the law tbh, I'm in the UK, the cameras came with the house when I bought it, apart from the doorbell one, which I upgraded from the old doorbell video camera.
Thought most of the European countries had laws against it
This is the camera that caught it, it's not exactly "pointed at the road", it covers my driveway, but that just so happens to cover the road, and it caught them pushing the motorbike down the road, and the doorbell opposite caught some audio
Apparently it is legal in the UK
If your CCTV captures images beyond your property boundary, such as your neighbours' property or public streets and footpaths, then your use of the system is subject to the data protection laws. This does not mean you are breaking the law.
ah, there we go
In norway we can't catch a sliver of public road \ neigbours property
Some of my cameras are definitely oddly positioned though, like this one, covers more of my neighbours garden than mine, god alone knows why it's positioned like that, maybe one day I'll grab a ladder and reposition it to be more sane.
UK is the capital of CCTV
Indeed, CCTV in all the places \o/
How does Germany vote @glacial knot ?
usually with a cross on paper

towards CCTV?
Yes, private cameras
Out of curiosity, how are you supposed to comply with this law in Norway, for example, my driveway would be very difficult to capture without also capturing the road
You'd tilt it downwards till you can't see the public road, or mask it with tape is what I've seen
afaik depends on whether it's recorded or not. But you at least have to mark every area that's under surveilance and won't be allowed to on public roads without good reason
I just tilt mine to only cover my properties
fair enough, interesting, yea I know here the law is essentially "You have no reasonable expectation of privacy in a public place"
🤷 yea, some places have dumb laws
I've disconnected my front camera since I'm renovating the room the cables passed through, I have to reinstall it
I should have an older picture here somewhere
I mostly rely on frigate for mine anyway, and use zones to filter out any uninteresting things. I'm really only interested in people entering zones, and also mostly only interested in people at the gate
got some nice decking there 🙂 I'm having to have mine rebuilt, it's all rotten 😦
Yes, I only trigger on people \ cats \ dogs \ boxes
I need to disable car in the back garden, that drives me mad 😂
No false positives in frigate
no raccoons in that list
I need to set up frigate to notify me when the neighbours kitten is on my driveway so I can go pet it, it's cute 😂
Yeah, my frigate notifies me of all cats
so I can tell my daughter to run to the window
that's cute 😄
😂
cats don't have owners either way. Just people responsible for their vet bills
Pet insurance in norway is almost as bad a scam as people insurance in the US
have a friend with two dogs that are chronically sick with everything
and it still only covers like half of the stuff
and there are deductibles
soundsl ike a scam
Hi, I have a custom baseboard for the RPi CM4 that has NVMe storage, much like the Home Assistant yellow. Anyone with experience debugging the PCIe interface. I cant seem to get an NVMe SSD connected.
Which baseboard?
Costom baseboard. Non home-assistant related. Just though someone here might have some experience struggling with the PCIe connection
I can share the PCIe related schematics
@last cloak might know
Got it working! Seems like I was just an idiot, trying to indicate device activity with the LED sinking into the DAS pin. Should probably just use it to drive MOSFET gate.
Nice, I'd love to have ALPR/ANPR, probably need a better than 1080p anologue camera on the front gate though.
Nah, the one night picture i posted above is a $20 Poe camera 1080
You can see the licence plate fine
fair enough 🙂
oh wow, the mess is spreading outwards...
That's called renovation, I know it is a foreign concept for a farmhand from the midwest
it's growing at an unprecedented rate
yes
From the land of Krampus: plausible
Nuclear heat
I need to find either a 12 or 24 bay DAS shelf
reasonably priced
SC200 and MD1200 both are interesting, M6720 and D2600 and D3600 are so damn expensive
oh big updates for pfsense ahead. may have to ditch this dumpster fire opnsense soon
like what?
Well, pfsense is noticing that a lot of people are going to opnsense because of their lagging behind on everything
so they are skipping bsd13 and going straight to 14
and doing a major jump in php
just don't update or touch anything you will be ok
continues to update every 2 weeks as usual
Md1200 are also quite expensive, for some reason
Md1220 maybe?
What about a supermicro 2U 16 slot 2,5 inch jbod?
Only 140dB at idle
Quiter than your average intercontinental missile
Only just
Perhaps a 10 disk z2 if you are brave
Omg nsfl
I was actually considering 2x2 6z1 with 12 bay
People on the truenas forums would run a 22 wide z1
On their old phenom units with 4GB RAM and realtek nics
yuck
With scale
amd
And ask why their performance was dire
Pretty much
y my pi0 running hassio with vscode addon such slow?
And frigate
Let's just throw in plex there for the hell of it
why do you guys even run pf-/opnsense?
i just plug everything into my router and it wörks
When I had a router it was an n66 asus that allowed me 8mbps via openvpn
So it was a performance thing, as well as wanting to play
what do you need openvpn for?
probably törrents
But today, stuff like that mikrotik 5009 is changing the "need" for opn/pf for pure performance
Camera server mainly, 8mb isn't a lot to play with
And of course, it is a lot cooler
And now will be doing intervlan and such on opn, which isn't really possible with a small router
why does a camera server need a vpn?
I could 100% manage with a normal modern router though
mödern röuter bröther
It doesn't need it, but I am not having an open port pointing to a windows box that might go 2 or 3 weeks between updates
Vpn adds a slighly layer of obscurity as well as requiring extra credentials. Not 100% secure, nothing is, but far much more work to get in
not running a firewall outside of the US? talk about a gluten for punishment lol
i love opening ports to unsecure stuff
china loves it too
thats ok, n korea wouldn't even have access to 60 minutes if it weren't for atx
we can't all watch fox news
i'm sure it beats watching trains 24/7
not sure what's worse, them selling tv's there or the fact you people buy them
I know public transport is a sore subject for your country, I suggest voting
public transport? gross. that's for 3rd world countries
i like it, it gets you places quick
so does a cannon
@tidal bronze I think the rest of the country is getting tired of california drama problems. not showing up in the news constantly like before.. must be placing a pillow over your faces and saying, "shhh"
where is the HA discord forums section? I want my atx fat jokes to remain in view
he probably ate it, you know him
I have a DS4243. Noisy and dumb, and you need a weird semi-expensive cable to connect it to a standard HBA, but it gets the job done. And they're dirt cheap secondhand.
I moved and am trying to get rid of some home automation gear if anyone in the US is interested: https://docs.google.com/spreadsheets/d/1Yidov4Kqo0KLLLX0eyEC7lA7K6okwSQOKHcGgDMoztc/edit?usp=sharing
Sheet1
Feel free to haggle. I'm shipping in the US, you pay for shipping. Local pickup in Chicago. All sales final. Email me if interested. rubin@starset.net
What,Tech,Qty,Price,Link,Box?,Notes
Sonoff Smart Wall Switch IW101,ESP,2,Make an offer,
I wouldn't say that cheap, but I would prefer something less noisy, then the sc200 is the best so far
Anyone know if it's possible to configure snmpd on a linux box so I can pull traffic to and from that interface into MRTG like I do with my switches? Or is that notus possiblus? 🙂
After plenty of research, I'm starting to think that it doesn't work like that but hey..worth asking.
dunno MRTG, but I run the snmp integration to pull internet usage speeds form my linux box
yeh, it's kinda weird....I'm thinking it may not be able to do the stats without some hefty complimentary scripts. Thanks for the pointer though, I might be able to work backwards from that.
Have a look at munin
you can always check with another linux box and snmpwalk
oh thanks mstone
I only have a couple of things set in the config as well. agentaddress, sysDescr, sysName, sysLocation, agentSecName, rwuser
Iirc. I run it with v3. Not sure anymore how things authenticate o.0
yes ongy, I am doing all that kind of stuff but it's taking a while, as the docs aren't great for doing things out of the ordinary 🙂
oh okay....fair enuff...makes sense
Munin is simple. You have the server and nodes, everything gets indexed and fetched automatically
On the clients you just need the munin-node package
Looking at it now! Looks great!
If you still want to do snmp it can do that too
Will keep that in mind! Thanks!
Just showing of my latest changes in my home automation. Next finalizing my wakeup routine
science really has failed us, hasn't it
instead of this we got social media and we rant here all day. smh
Maybe the extra vaccine doses can be sprayed into the atmosphere
Real life chem trails
Did you say agent orange?
still no pants that just fit though
that's quite the challenge when you start out as a human and turn into an amorphous beast
norwats been doing it for years, think @clear ferry said it's something with the diet
@static schoonerwrote negative comment on the whiskers youtube video for the LR4
mine just shipped, but will be delivered when I'm out of town next week
oof hope you got someone who can get it off your step. the box isn't hidden in anyway
LR3 box was just a typical brown cardboard box. the LR4 pretty much has in big bold letters Steal Me
meh, my front door is down a long driveway, around a corner, and in no way visible from the street
but yes, I have someone coming by to take care of the cats and hopefully they can drag it inside
the cats, of course
Sometimes I think my cats are more like a viscous fluid
I always think that
We have one that rolls around on the floor like a seal
Just like that
give the cät some gud belly scrubs
your cat?
aka fur seal
a gorgeous fur seal
I'm having some trouble with url-encodings in a URI being eaten by apache-- does anyone know of a public endpoint that would return $_SERVER but also have a default handler (so https://service/foo would show the "get /foo")
tons of these exist already for headers (but not URIs)-- https://ifconfig.me/
Get my IP Address
I have a mod_proxy reverseproxy in a black box that seems to be not respecting nocanon
http://my-frontend/foo%2Fencoded comes out of the back of the proxy as https://my-backend/foo/encoded
but the config has AllowEncodeSlashes nodecode and Proxypass... nocanon
apache 😂
I've never seen this I believe but I'm pretty sure your proxy config in general is wrong. can you share it?
err noob question. i setup pfsense on metal on a pc with onboard nic and 2 port pcie nic, and i see that ive been assigned a lan but wan has not been assigned. since i have 3 ports, whats the effective way to determine which ports i plug in for wan and lan so that i can change settings in the router admin page?
plug one in, check which one changes state 😮
state is reflected in pfsense home screen then i assuming
🤷 I don't use pfsense. But that's how you usually figure out which physical port is which logical one
change state of a physical port, check the logicals. Repeat
It is reflected both in UI and cli


