#the-water-cooler
1 messages · Page 3 of 1
because the office is in the attic and the data centre in the basement/garage 😄
Surround it with pillows
Unplug the fans
It's only one switch, three servers and one disk shelf in production now, my lab is two more servers and half a dozen switches
But I moved down
😮
Also that feeling when your wife buys you Japanese candy @glacial knot
And you say "is it turtles"
And she says, "how did you know"
suffers in single
"I read kamekame from across the room"

My reading is improving
They weren't very sour though
Kaaaaaaa meeee haaaa meeeeee ha
I should get Shin Chan
It is probably good for learning to listen to Japanese
Since it is a kids show
Quiet servers then
Weird way to say: babysitting a script deploying a bunch of containers
Support & Follow!
- Personal Voiceover: https://www.klrvoiceovers.com/
- Merch: https://www.klrproductions-shop.com/
- Podcast: https://www.youtube.com/channel/UC10Fl3Ht-7A0g0nyREjDATA
- Twitch: https://www.twitch.tv/klrproductions
- Patreon: https://www.patreon.com/klrproductions
- Instagram: https://www.instagram.com/klr_productions/
- Outro S...
One r510 with 14 drives
One msa70 with 16 drives
One mini itx box with 4 drives
One Edgeline 300
One Cisco 2970
Assbury Poo
all filled with old ass black and white non english garbage media content i am sure
I thought the first Ultraman season was bad then I saw the second
obviously. subtitles blow
better than in some original languages where everyone running away has already been gone before the third word could be completed
Which discord? Chonky Brits living in Sweden?
Close enough, "tea loving raccoons"
They didn't peal the banana. Omg
You peel the banana before inserting?
Always
But I never insert it, or touch it, I don't do bananas
Only as a fake weapon
have a little bit of light for hours or a lot of light for seconds
quick random question, not sure if it would fit under DIY
any of you mechanically inclined people can think of a better mail sensor for cluster type mailboxes?
mailman never opens it, just throws mail through the top hole
i currently added a horizontal hinge on the top admission hole, whose movement i'm detecting with a reed relay, but it only works if the hinge bends 50-90 degrees, like in the case of a full envelope being shoved in
if you shove the envelope sidewise, or put some small mail in (like a postit) it doesn't work.
Optical sensor would work but requires continuous power. Could put multiple sensors of what you currently have
simple motion sensor would work
but wouldn't a PIR sensor also trigger if my neighbor gets mail?
does the mail go into a joint tray?
If it's inside your box
what do you mean?
those boxes look like they are seperated boxes for each address
every owner gets his own mailbox, all mailboxes have a top hole, a PIR sensor in one mailbox makes me think any motion near it would trigger the mailbox
putting a motion sensor in one shouldn't trigger by someone else getting mail
how would it get triggered? it's inside a box
i might be missing the point
we're talking about a PIR sensor that would detect the mailman beeing near the box, through the mailbox slot, right?
no talking about a motion sensor inside the box that would only trigger when something enters that mail slit
it would also trigger when you open the box to get your mail too
could be solved with a switch that detects if the box is open or not
wht kind of motion sensor would tht be?
the mailman never opens the box, only I do
yeah, but it will register as "new mail has been added"
Just a standard pir facing inside should do it
but... if I'm checking the mail manually, kinda defeats the purpose of having a sensor 🤨
oh, so the pir should face the way mail is shoved in, not peeking outside through the hole?
Yes
that might actually be genius
i considered piezo sensors on a hinge, thin film buttons on the bottom of the box, with a bumper - to detect mail being shoved in - but it would still need an array
And I'd mount it on the door so it doesn't project through the hike somehow and false trigger
yeah, i'm considering a doormount too, if only to be more surreptious, and hide an antenna through those outside holes and under a label
You could also use a load cell with a sheet
By sheet I mean a plate to distribute the weight evenly
that would probably work better than continously polling IRs, since the slower you poll IR sensor, the more chances you have to miss mail; with a load cell it doesn't matter
But pir should work best very little power requirements I believe
yep
that's prolly the best option
might be good enough to be placed in one corner and detect mail in the other corner, heh, even post-it sized
You probably have a pir net don't have a suitable load cell. Try the pir see if it works
i have a bunch of load cells too around, haha, but i was hoping to avoid them
Nice fully equipped
i actually love it, since it needs no physical changes to mail mailbox, not even my current horizontal hinge
the more surreptitious it is. the better
Other possibility would be make the current method hair triggered by changing the angle to be just before it triggers
I'm not sure how to do that, mechanically speaking
if it triggers too early, it still needs to allow wide swing angles, for thick or long envelopes. if it triggers too late, it's just meh
Or a plate that goes the entire length of the slot attached to the sensor
oh, hmm, the hinge is currently mounted above - i should mention that. there's no way to mount it below, not easily and without some powertools or hotglue anyway
but, eh, even if it's mounted below - how would you trigger to both a few degrees and 90 degrees of swing?
Is there a hinge already on the slot
most contact switches with rollers i've tried eventually bent if mounted too close
nope, just an empty slot
Could use a normally open switch with a hinge
What strange mailboxes
a hinge would kinda make it look odd, compared to everything else, like "this guy doesn't want his mailed stolen with tweezers/whatever we use"
When it falls back down it closes it
they're cluster mailboxes used in condominiums, pretty popular in my country
oooh, that could work too
I kept messing with having the switch "behind" the hinge, in the part that flexes
a magnet behind the hinge, to make it stick to the door, when it falls down, might work even better
opening it would be a tad weirder, but not significantly
Think pir is really best though if I recall they can be used with extremely low power even to trigger deep sleep wakeup
The place I live in has 160 apartments heh
ZigBee PIR sensor has good battery life too, I haven't changed my battery in over 3 years
oh yeah, i was thinking exactly atthose
Currently my outdoor mailbox had a ZigBee door sensor on it, 1+ year so far in all weather
got some sonoff and ikea ones - haven't changed batts in two years
Aqara > tradfri > sonoff
I'll probably have to throw some AAs in it, though, since the RF layer is a bit power hungry
Any helium miners nearby
could only make it work from those wall dug-in farraday cages through 8 floors of rebar with some SW12BW500 Lora
You could do deep sleep lora
That will give you good battery life and replaceable battery
Could use LORAWAN
Lorawan probably isn't worth it if it is within the same building
that's exactly my thought, do LoRa when needs to signal stuff, deep sleep until some sensor 100% says so
Just point to point lora
I already have some lorawan setup at home haha, TTN and DOHS on helium 😉
but nothing 'cept lora works - zigbee, plain old OOK or ASK, even tried PJON
guess 8 floors of rebar and the huge metal box aren't helping
You were talking about using a small antenna outside
but lora works, i'm mostly worried anything but some AA cells won't really enjoy 8-20 seconds of RF TXing
what I did is put a label on those tiny holes "please no ads - nominal mail only, I lost mail! thank you"
and got a whip antenna underneath
but went from -130 to -115...-110 on RSSI so... i'd rather not suggest my mailbox is more interesting to the curious passerby for those 15dbi
for the longest time, some banks sent preactivated contactless CCs
thus, probably the rampant mail theft
That’s incredibly stupid. Should at least require a first transaction using pin
but yeah, several kgs of steel are proaly worth more now
I agree. Nothing I can do about it tho, nor about the people who still hope that still might happen
The trådfri ones are junk when it comes to reporting battery, I have one that went from 34 to 16%, then stopped working, then when I replaced the batteries it still says 16%, even after removing and adding it again
What am I doing wrong?
Or is it karma for doormat stealing?
you bought an ikea turd, that's what you did wrong
That would indeed explain it
You may have bought electronics from a company best known for flat pack furniture with funny names 😉
And apparently meatballs
Eh, their buttons and bulbs are fine
Outlets too
Motion sensors are probably designed in the US
What are you using instead? You know, what are the COOL KIDS using these days?
Aqara
I have 3 and they are garbage thanks to them just dying and not reporting battery %
I have it set up to detect raccoons outside
it is mission critical
I have four in use currently and three more in boxes
Batteries are so far 2-3 years life
One is even hacked to 1s updates
How do you avoid false positives when you come and go?
he brings a racoon in, so it's not a false positive
I am new to this discord channel. So, hello people!
Quite a noob to homeassistant. Although it eats a lot of my spear time I love being sucked into that rabbit hole of home automation! Today I feel like a champ as I managed to successfully do a ZHA OTA firmware update for my Popp (Danfoss Ally) TRVs. 💪 😅

Not even hot desking, that is fancy
Tbh that’s pretty deluxe
@static schooner you guys trying to beat San Jose or what?
yeah, that's been passed around
And my company is expanding here because it's cheaper than up there 🙂
SD market is better, SJ correction last 2 months, 5%
I never thought I'd see the day when San Diego was considered to be a "low cost" area
SJ meh, SF yep, just for food.
I considered moving up to SJC, but really didn't want to. Luckily there are more opportunities in SD now
Other than serving bots you ain't missing much. 🤣
the traffic and commute makes it sound miserable, even if there's more WFH now
I just don't have to worry about that here
I started flying there twice a week now, didn't experience any traffic, compared to LA.
I must say, I do like the on demand banchan delivered by a bot straight from the kitchen. No waiting lol.
I don't mind visiting, and the food is pretty good
These things are pretty cool. App > kitchen > table is the way to go.
do you tip the robot?
Lol of course.
you would... probably ask it how's its family is doing as well!
hit on it without repercussions
Apparently we win this round vs. SJC
and with rent it feels like you're just throwing it away every month with nothing to show for it when you move out
just move to another city tbh
I bought when it was more...reasonable (relatively speaking), so I'm just enjoying the nice area and appreciation right now
odd how aren't NY apartment rents on that list lol
I think NYC lost to us last 2 years.
Yep. I would like an honest answer.
That's never the answer. Unless you are getting the short end of the stick.
That's why I prefer bots that come in tray form. Lol.
Facial recognition, of course
Jesus Christ your house prices are bonkers
Here I am with my $700 a month smh
Paid mine off last week. 🎉
I've downpaid 50% of my house loan, but both my cars make up for it 
House prices have over doubled since I bought though, so I'm in the clear by far
Congrats!
Ta. Taking with my tax agent / financial adviser today he was like "so... don't go nuts lifestyle wise with the extra disposable income. Think about other investments". Pfft. Yeah maybe in a little while.
Haven't looked into the cost yet. Got a lot of glass.
Is it the same in aus as in Norway
Not having a house loan is financially negative
Because house loan gives tax deductible
One of my favorite George Carlin lines - ‘Think how dumb the average person is; half the population is dumber than that’
I love this quote
Good thing I am a raccoon then
Gonna have to break it to you, a racoon is almost as smart as a monkey, which is slightly less intelligent than a human, so you might come out badly
Still probably smarter than the average Missouri person
I ignored the rest and just read this bit
Thanks
Meirl
Like you can afford a calculus
Pretty sure its something like that
or any above average norwegian
Swapped it for 37 doormats
a couple more and you can finally insulate your trash can well for the winter
Yeah there is a huge negative gearing benefit for investment properties.
Yay for being priced out of the property market
Damn genz
Yes and no. 😆
Does anyone do installs or help with setting up automations as a business? Wondering what rate I should charge for setting up automations/troubleshooting
There's a few people on the forums who do. What you charge will follow the same logic as for anything else and will be driven by what your local economy is like.
with the exception of mom and pop type business's are there any cases of big businesses using HA?
Just wondering what people charge so I get an idea. I was talking to a lutron integrater that does a bunch of other stuff and they said I could be their sub and do $125 an hour for setting up complex stuff and troubleshooting. I was wondering if that's a good rate
For home assistant and networking stuff
Well, good rate is all relative. What's a good rate for somebody living in Houston, Texas, will be different to what's a good rate for somebody living in the Australian outback, etc
I certainly would be charging more than that, but then I value my time (and experience) more highly
Lol not in the outback. Here outside of Philadelphia.
Don't forget the "I didn't build it but you still want me to troubleshoot it" and the "I built it but you touched it" surcharges :)
The second one works especially well with git
I do that at work...
Howdy! Think this is the right channel to post as it's not related to HA directly. I've got a amcrest turret cam (https://amcrest.com/4k-poe-camera-turret-ip8m-t2599ew.html) along with a junction box (also from amcrest). Maybe overthinking it, but I'd like to mount it on a wall, however I'm concerned rain could get in between the camera and junction box and subsequently get inside to the wires, as there is no seal between the two (i could tape it up I guess) — has anyone done similar without issues?
AMCREST MODEL: IP8M-T2599EWCAMERA FEATURES: High Resolution 8-Megapixel Ultra High Definition Video for Excellent Quality and Clarity, 4K @15fps, 3MP @30fps. Features enhanced low light capability utilizing the latest CMOS image sensor and chipset.2 Powerful IR LED for 98ft Night Vision. Built in Microphone for one way audio.2.8mm Lens with a 1...
Well, typically those are designed for ceiling mounting
Are you thinking of mounting it on a wall instead?
Yeah on a wall instead, I've seen wall brackets for them, but they seem overly priced here in the UK (£35), the camera can be tilted so the horizon is correct if that helps so there's no wonky images
A quick look at the camera manual suggests you'll be fine, but you probably want to ensure that there's a drain hole at the bottom of the junction box
makes sense, i have found some waterproof tape that I could use as a precaution too
Some silicon sealant for the upper 2/3 is probably neater looking, and more effective
well, maybe not as neat if you've seen my previous silicon sealing efforts 😂
just need to figure Frigate out next and break free from Ring
A wet finger smooths silicone nicely.
that's what she said
Just forgot where I was.
@forest edge I think one ride on this, down in Santa Monica pier should fix your "hate California" issues. 🤔
is that a ferris wheel that swings back and forth?
Anything smart and wifi immediately reduces it's IQ by half.
I spent the greater part of the day trying to get a Roomba onto a network and failing.
Basically gave customer support: "Here's all the knobs I can touch. Anything look interesting?"
convenience and durability do not go together. pick one or the other.
Yeh they're durable little bastards if my neighbor can attest. I'm introducing them to HA and roping together some of their pre-existing devices.
Even got it working with their Nest thermostat and some Node-Red glue for a water valve on our property. And also working with their Google Home so they can command Google to do the odd thing.
But I am a bit disappointed I couldn't get the Roomba working. It'd be a new kind of integration for me to learn and suggest some neat automations to try out.
This goes is circles just the way you like it.
no thanks. I can vomit perfectly fine where i am
Let me help you with some char grilled octopus 🤣
careful, you start showing pictures of seafood and you might awake the @clear ferry
speaking of food. dinner is here
good old fashioned fried chicken
Then just for atx
spitting on a finger is a disgusting but wonderful way to do this
however there is a hack for how to cut the end of the nozzle so you don't have to
we once again have to endure the reminder that norwats walk amongst us..
@tidal bronze they say the drought in the west could last till 2030. hope you stocked up on coconut milk
so I have a Linux problem, not HA related. docker host for Frigate, mapping a NAS device into docker host via fstab to use with frigate. works well, however after every reboot I need to use sudo mount -a to get that remapped. how can I avoid this manual step?
Well
You are probably mapping drive before networking is up
Make it a post boot script, or a systemd service
sounds reasonable
how would I do that? 🙂
great, thanks
maybe an nice add on something like the shopping list but an list with the products in you home pharmacy with the exp date and for what is being used and from who it is ....
If you have a feature request for the frontend you can open one here, for Home Assistant itself please post on the forum. All other feature requests should be made to the developer of that custom card/component.
probably already enough to put the X-network or whatever flag in fstab, as systemd will then delay trying to mount until network is up
That will probably do too
After migrating to a lot of cloud storage for backup i fell in love with systemd mount scripts
Has anyone here ever tried to set up two separate automations off of a single trigger? I'm curious if it will work 🤔
systemd mount units can be pretty cool
#automations-archived is what you want but you may wanna be more clear in what your asking when you ask in there.
I figured, I just didn't know if HA would have queuing issues if two automations try to fire at the same time
@rugged jackal If you're running Raspi, there is a config option called something like 'Wait for network on boot' under raspi-config.
There will be a race to see who gets triggered first but they both will trigger. Now, no more support here.
thanks, I am not, running docker in proxmox. the config above worked, now I just need to figure out a way for the frigate container to only start after the mount
thanks though for the pointer
Should be relevant
thanks, checking now
that sounds like a horrible workaround for slow storage
plex-htpc is leaking memory =.=
I need to check if the non-htpc variant can be used for my htpc usecases
+17
I need to check how old this TV is, I got it for free since my parents upgraded D:
Just because you grew old and decided that Netflix is actually decent doesn't mean HTPC is dead atx
I am actually cancelling my Netflix thank you
Using the money to buy a new HTPC I hope
No, my apple tv is great, coupled with Plex in the garage
lost cause smh
smart TVs that can rune somewhat decent apps mostly obsoleted htpcs
main issue being software freedom ones
I used the smart apps on my TV for 1 year, then replaced it with a roku, then a apple tv
does the apple TV support homekit?
Probably, I don't use homekit
Yes. What do you want it to do?
just wanted to know if it does for now
Cleaning the dust off this was not easy. 🤣
Evening guys, i have a headless ubuntu server that is not recognizing a display, we tried three displays now, none turn up to respond. We can, however, login via terminal. Any idea's?
Does the machine output anything on boot?
Then, your GPU is dead
That is a GPU
What could be the cause of this when a its a headless server?
Just trying to assess the situation here
My friend has had some frequent power outages
A dead GPU? A lot of reasons
is there a way to reinstall the whole distro by only using ssh?
No
You could do a preseed/kickstart install
It's not hard, but it's not exactly easy either
One way to find out 😄
What about this; a noob screwed up the bios drivers?
No
There are no "bios drivers"
The bios should be able to drive the on board graphics - if it can't then the graphics are either dead, or missing
hmmm
were now testing with a random gpu from another computer
basically theres no way to 'accidentally' mess with the drivers so that a display wont function anymore...not even a bios.
?*
The BIOS knows and cares nothing about your operating system
Think about it. When you buy the computer it has no OS... if OS drivers mattered, how would the computer work?
OS could install EFI drivers via capsules. But that'd be a stupid design
we're in baby
im still baffled by the mere fact that this mobo GPU isnt functioning anymore (red: fried)
Imagine that
@forest edge no more coyote problem
Your move
For every Coyote fallen, two more shall rise up in it's place. Hail Hydra!
Something is triggering my bedroom motion sensor causing it to reset all my other rooms presence, perhaps i should call ghostbusters
I've seen ghost triggering when sunlight reflects onto the PIR sensor
otherwise, yeah, get those guys in there
they ain't afraid
it aint the sun, as it's pitch black outside, i realised what it probably is, i have my window open in the bedroom due to the heat and it's probably waving due to wind
maybe its a insect close by
there is only zuul
Ghost triggering?
I believe in hippie lingo it's, "negative aura's man!"
That would be such a disaster, house would go bonkers 🙂
@clear ferry how's your new EV been treating ya? https://youtu.be/6KBSCNeMUrk
Florida Man Brian becomes an internet legend over night with this video
So many people are going to be disappointed when they try this.
something about that seems fishy. power plug is unplugged
Sorry, I was looking for doormats
typical.. love the american game but bitch about every detail
I appreciate 'muricans like to stick to medieval measurements out of some misplaced sense of longing for back when they were just colonies, but one of these days they have to get with the times.
No thanks. I've seen what contractors look like trying to build something using metric. thought I was watching the end of a Benny Hill rerun
back in the good ole days when your country still used wood fire stoves and rode yeti's to work amirite
Hello all! I am getting into HA, and just found this community!
We still use wood fire stoves
oh right.. the yeti's was only a few years ago
Now everyone rides V8 pickups to the coffee shop to grab expensive coffee, complaining about people who do anything
Absolutely no generalisation or stereotyping at all
Anyone have any opinions on brands of folding rulers
And whats features to look out for
@last cedar if you not driving a V8 are you driving?
folding rulers? the 2m size?
they are all roughly the same quality
never buy ones, only ever collect the freebies
Wiha make a nice looking 2m one with 1000v rating and a cable puller
Kinda sus using a precision measurement device to pull cables
I'll keep my 2.0l i4 with 320bhp 
integrated cable holding function, 3-7mm
tested at 10kV AC and guranteed to be safe up to 1kV AC
surprise surprise, a piece of wood is a good insulator
plastic probably, but yea
ew
They even included typos
A sliding end would be cool though I suspect they're not readily available in new models
Who tf pulls 1000v cables with that thing?
*and tested with 10.000v
So you attach a live wire to it and poke atx with it
pulling live wires that way sounds like a great suggestion
Cable pullers with voltage ratings is pretty much mandatory for a lot of places
That ceiling in the image also has seen better days
True but I don't think he's there to fix the ceiling
It’s centimeters.. ?
Atleast it's not dual scale
I hate dual scale. I pretty much refuse to use any measurement device nowadays that isn't 100% metric or Mcdonalds units
Too easy to make dumb mistakes, and even if you don't you waste brain power ignoring the other scale
mcdonalds units? is that like atx's weight in nuggets?
moar red
It's french for give me my cola
Hmm looks like I'll struggle to find a metric folding ruler that has a sliding end
Especially one that isn't wooden 🤢
is that a map of the country who made the most technological advancements
no doubt due to our measuring prowess
rest of the world is stuck making shoebox size cars cause the numbers get too high measuring
Ironically most modern EVs are probably heavier than a standard US truck
maybe you should exit the vehicle before entering the scale...
So hauling all that extra weight around using batteries! Brilliant!
Never heard this bit rate but......
It's so good you can't even hear the notes anymore
Which is why I believe EVs should pay more road tax, not less
I am fascinated by music assistant. After ages I am playing with scripts and automations 🙂
when motion detected in bathroom and toilet seat sensor trigger play... https://youtu.be/PscKuokw-WY
Provided to YouTube by CDBaby
The Poop Song · The Toilet Bowl Cleaners
Still Farting, Pooping, Puking, and Peeing
℗ 2011 Motern Media
Released on: 2011-03-01
Auto-generated by YouTube.
we should levy a toll on them. Since the EU nicked ours for incompetence reasons
Too bad you can't find the full song anymore ):
the good and worse part about the internet and 4 bajallion people surfing it, nothing is ever completely gone. at most gets shuffled to lost indexed sites and archives
They can all pull cable if you tape it to the measure
But don't get a wood one if you use it for pulling cable
I prefer V12 and V10 sound personally
Carrera GT is goals
I prefer W12
Strange I've never seen a Phaeton in Norway
I've seen at least half a dozen in Sweden
W16 is fun
feel free to find it, because i cant :/
I found a few of them, nothing that can be linked on here but I was curious why they were hard to find. Found something that stated he went full blown religious and thus tried to kill every link to it. Don't use Google to look for them lol
Y‘all too slow for me now
I remember when mice wheels started doing left and right scrolling
I still haven't used it
Like side to side wheel?
The scroll wheel on my mouse clicks left and right which is handy for going back/forward in either the web or file browser
@scenic radishWelcome to HA discord server. as a new member you'll find all the support channels on the lef... wait a minute..
my mouse actually has 2 wheels. One mapped to vertical, one to horizontal scrolling
I used to have a second job when I was an apprentice
it depends on continuing climate change
It was great income, added $2.7k a month working 4h per day 6 days a week
Nice
you by wood in liters o.0
Ster
Ich muss zerstören!
it's more or less m³, but specifies that it's stacked with the normal density of that
And not a measure of actual V wood material
And I'd expect m³ when you just use normal Volume units
Cozy
Kösä
Anyone here know how to configure nginx
yes
can u help me please please
no, why?
because im deperate and i keep trying to get help but either to they are busy or cant help with truenas @finite atlas
then either be patient or get a commercial product that has guaranteed support
Alright
what do you smell?
something wrong with that meme
power outage.
Rolling blackout you say? @dusky plank
I've heard rumours that EU countries might do that this winter
I didn't think those were voluntary over there
I've heard of your rolling blackouts thank you 
only in california
lol risk is not actual
there has never been any rolling blackouts anywhere here
only like 2 places in this whole country ever had issues. california due the fires etc and texas due to a freak winter storm so far in the south
this mad max inspired tesla looks sick https://cleantechnica.com/files/2020/04/BRADBUILDS-MAIN.jpg?width=1200&enable=upscale
you are thinking of the VW EV's
overall according to type hybrids are the worst offenders of catching fire
I have yet to hear of a hybrid catch fire
EVs are at least once a month here
A whole parking garage had to be torn down due to one two years ago
Batteries burn well
Oh no, that one was actually an old diesel car that started it
But it was parked next to a bunch of EVs
They are at least hard to extinguish
Yea, just make sure it’s not more than one building that’s gone
why you park your vehicles outside @clear ferry? lol
lies! you have too much junk to ever park a vehicle in there!

Is that bad
Well, depends on what you are trying to do
Inside a jail, same as any other nginx deployment in bare metal
Inside a container, same as any other nginx deployment in a container
In truenas itself, don't
RIP the range on that thing
Thermal runaway is a bitch
Can anything put out lithium battery fires?
So you can put them out
I have a patent idea to look up
yes, material that absorb the heat and cut fresh oxygen off, so tons of water or sand
and you usually want to keep the car encased in it for a couple of days
Can the water react with the lithium?Or is that bound strongly enough into other molecules?
not really
the cells are water proof, if you stop the thermal runaway, only a minority of cells will react with the water and thats why you use tons of it and drown the car and not just hit it with a sprinkler
Kids these days and their conservative memes
Typically electric cars on fire are towed into a shipping container which is then filled with water and left to cool down for a day.
if i were to post my memes, i'd magically vanish from this discord including the memes
you should really move on from posting ball gag and dominatrix type memes
Quiet down there McCarthy
I think it's time to head to the barn and feed the cattle. You can make memes over the weekend.
there you go, something that wont get me removed
https://videos.pr0gramm.com/2019/07/22/9fc81abfc3ec86e2.mp4
oh hi there
Gif of @last cedar
Would still give her doormats and snacks
Swedish is acceptable these days
Swede waiting for new car for two years is also acceptable
Just wait till @last cedar sees the number of pings
@last cedar will love it
Dang i love @last cedar
Hope @last cedar has fun at work
While waiting for the new @last cedar mobile
When will you two finally date 🥰 ?
H8 u H8 u wouldn't D8 u
8 u cause i'm hungreh
7 8 9
How far are you with your new office?
Roughly 2.6 meters
That's 1.3 European cars for our American friends
Or 0.04 football fields
it looks like you could really use some more desk space
Lol I’m in scale
Oh god
That didn't answer anything
Basically I’m trying to read my comics on the go.
Found a great program that does it for on a local network.
But the problem is I can’t reverse proxy it because for some odd reason I don’t know what’s wrong with nginx. It work for shot time redirecting it back to my nas gui but now it won’t work with web comic, and I don’t see a single error in it.
Well...
Hopefully you are doing all of this in a container
Or multiple
And what software is that?
Are containers folders because im on truenas scale
Kavita
Ah then yes
Then you should deploy one Kavita app, one swag app and then do the correct forwarding and swag DNS authentication
And everything should be smooth sailing
now i know your name 🥰
Love my chyna stuff
I have more in boxes
Bremer Stadtmusikanten
Viel danke
What do you use them for?
This revesed, face looks like that body and body looks like that face
FML
butterface
<@&330946878646517761> Mods, I have a question about rule 6. It states no textwalls longer than 15 lines. I was previously accused by a moderator of violating this rule. The link to the message is below:
<#general-archived message>
I was told this is 19 lines, but I am not counting lines that only contain markdown syntax that does not get rendered into the actual readable part of the message. For example, fenced code blocks. If I include those, I do see 19 lines. But if I leave them out, I am actually at 15 lines which is well within the rules.
I can't tell if the mod triggered the bot or of it's automatic. If automatic, maybe the bot is looking at the raw message instead of the rendered one. In my view, I don't think syntax lines should count since they are invisible. Did I violate the rules or not? If you see my attached screenshot, the "rendered message" is 15 lines long by my count.
Is that a technical limitation or on purpose for some other reason? Why do invisible lines matter?
Ok I can forgive the bot. But the moderator didn't read between the lines, so to speak, so my question is more about the real person aspect of this.
If you just look at my message without clicking the edit button, do you see more than 15 lines? Am I counting this right? This seemingly straightforward rule is difficult to understand and follow.
- It's automatic
- Your post was over 15 lines
- What you think should count is irrelevant
- Do read #rules again
These rules are not to be interpreted how you like, there are no "loopholes." Anyone claiming not to be breaking the rules due to it "not being in the rules" will result in the according consequence.
What I think should count is absolutely relevant because otherwise it's impossible for me to follow the rule. Like I said -- if invisible lines count, I broke the rule. If invisible lines do not count, then I was falsely accused. So yes, I think it does matter. By the way my goal is to not be argumentative, I am striving to be a good citizen and understand the rules better.
To me, the spirit of the rule says that only lines that get rendered matter. Because lines that do not get rendered are not disruptive to the community. Or put another way, they do not make a larger message which is the point of the rule.
___These rules are not to be interpreted how you like, there are no "loopholes." ___
The bot only cares about what you post, you posted 19 lines. Nineteen is greater than 15.
With respect, though, I'm looking for more than just 1 moderator's opinion. I'd like everyone to be on the same page. I sure would like to avoid breaking the rule with 1 moderator and it being OK with another. Again, just trying to make sure I am 100% understanding.
Oh and I think you left out an important part in your quote from the rules:
If you are unsure about something, please ask either myself or the community.
That's exactly what I am trying to do here.
And ... the question has been answered by more than one mod
Stop it @royal adder
You just don't seem to want to hear that answer, so you're going to argue it to death
These rules are not up for discussion
(and by death, I mean until somebody gets fed up and drops the banhammer)
you have been warned and muted before, which should a sign that enough is enough

continuing this, will result in a permaban
we have other things to do than discussing stuff like that
I apologize for the misunderstanding Frenck, I'm not trying to be difficult. Am I not allowed to ask for clarification?
It has been clarified, you don't want to listen
that's cute, but do you have one with kirby?

that's missing the hammer 😮
What I understand so far is that the bot counts syntax lines, but I don't know if that's a "bug" in the bot. Honestly I wouldn't (and didn't) reasonably assume that non-rendered lines would count. Why am I being reprimanded?? The rules say to ask questions if I'm unsure. That's what I'm doing.
That's OK, I will willingly leave the server. Your moderators have shown that they don't care, are rude, and unwilling to listen. Any attempt to understand the rules is reprimanded. I am honestly disappointed in the way this discord server is managed.
You should get that inability to let something go checked out, it is symptomatic
That is your call, you are provoking right now. It has been made clear, it is written down and it has been explained to you. Yet you keep trying to argue. It has no use, and will not be accepted. Continuing will be considered trolling. I will stand up for that.
So, what's everyone's favourite way to run/manage docker containers? Docker compose files? Portainer? Something else?
argh, why does plex leak memory like it's a sieve?
why not use JellyFin?
Compose, but I like my YAML 
I like YAML too 😛
Some YAML is fine with tabs. It's mixing tabs and spaces that it really hates
portainer is awesome to have a quick overview/monitor of the cluttered mess of hosts and containers i have, the log view and web shell is nice for that. every container is configured and runs via compose though, all hosts expose their docker socket to the portainer instance
hm, jellyfin looks cute
i likey it
hm, plex is better at recognizing episodes at =.=
I got tired of the Plex app on my Shield losing audio sync when skipping around a show and don't have that issue with Jellyfin
much less bloated
paraphrasing somebody else "Plex keeps adding features and just leaves bugs unfixed"
Oh wow, fantastic!!!
Mine leaks nothing, that I notice
My plex has been fine too for memory leaks
But I was still going to give jellyfin a shit
it's the htpc player that just decides to eat gigabytes of memory for me
do it!
jellyfin is plex is open sauce and free
I just have issues finding media to import lol
I need to bring my new truenas box online and then I was going to add the usual suspects for linux isos to my docker box
Ew
it's the only one I managed to get running in a way I can remote control :/
Any media box ? Shield, Apple TV, Roku?
nope
Nope what, you don't have one or you can't control it? 
don't have any
Kids these days!
using actual computers D:
¯_(ツ)_/¯
I thiught you would approve of such archaic measures
Being 258 years old
@finite atlas do you have an idea how to show the current queue for a player? o.0 from the webinterface
wdym?
watching something. Then add another episode via the "Play Next" or "Add to Queue" feature. But can't find the current queue afterwards D:
@last cedar someone told me I should make a shed for my winter wood, but I wanted to know how much material I needed
So I designed one in 25 minutes
this is actually a good deal. https://reolink.com/us/product/reolink-video-doorbell/ while reolink may be kind of low end the fact that this thing has a poe option and is under 100 with an api that can tie into HA is nice.
buy a tarp and call it a day
typical murica
? why spend less and accomplish more when you could spend more and accomplish less?
Because wood working is fun, and it looks nicer
when you don't live on a farm with 5km to the nearest neighbour

you only have like 2 years left to go before global warming turns your land into prime termite country.. why waste your time?
You do love your wood!
well his home is 10% made of it and 90% mud
yea ours is brick and concreate lol
you should build the wood-holder from the wood itself 
Was expecting it to be more expensive since contruction wood has increased in price
only $300 for what I need
a commercial one the size I want is at least $1200
Ouch, that's not fun.
I am printing a doorbell wedge for my parents, let's hope this goes to plan 👀
Reminds me, I need to design a new doorbell
I use a Aqara button
gonna design a cover for it, that just presses the button
if its for a Ring device, just call customer service and complain about unwanted motion events....they will send one for free after reviewing some videos
they are really good about that 🙂
It's not a Ring one, or a Eufy. It's a PoE RTSP doorbell (theoretically, we'll see when I install it on Sunday). It was cheap and came with a whole two screws in the box 😂
Local Poe doorbell with camera you say?
Theoretically. It's Tuya (🤮), so I'll see when I get it set up
@shy comet can you get rtsp from ring?
nope
Thats why I use text editors that automatically convert my tabs to spaces where needed 😄
With a good editor you can barely tell the difference
I used to be 'team tab' 20+ years ago, but eventually faced the fact that we lost
I still love tabs, but accept that is not the way
Also im sad I was asleep and missed all the drama 8 hours ago
few things matter less than tabs-vs-spaces
i haven't used it that much yet tbh
It has got expensive though
Hello guys I need a help with an advice, I have an old hometheater system [ lg lhb655 ] connected to my tv android sony, I want to control the volume of the amplifier instant change but the amplifier can't do that cuz it either goes up by 1 or down by 1 , is there a way I can control the amplifier faster? if there is a device that I could buy and let me control the volume.
Do you mean it goes up/down by 1 by pressing a button?
@umbral cliff by using ARC yes.
I can instant change the volume of TV but amplifier won't.
That is probably a limitation of the device
Unless you can directly control the sound system looks like it
Is there no 3rd party device that let me control the volume for example I can always set my main amplifier to 100,
current amplifier -> 3rd device [Controller] -> TV?
If the amplifier isn’t letting you change in one go then no third device would work
So I guess I have to buy new system thanks for response
Reminds me, need to connect my silence TV automation to my new sound bar
I got rid of the sourround system and amp that it was tied to
Interesting, we are up 1.3% from last month in inflation
Curious how Germany and US will fare as they seem to be ahead of us at all times
Did you get the numbers for July yet?
We went from 5.5 to 6.8 yoy
From June to July
Curious about the US number that didn't stagnate last month
Team spaces for sure but a terminal will never be a full editor 😅
_angry Emacs noises _
Oh VSCode also does it for me too
vscode is a terminal?
Oh do you mean editing in a terminal? If so I also use a program there that swaps tabs to spaces lol
yeah i do too, iterm. it's not that it works but you cannot count on it if you work on multiple systems
anyone interested in helping me setup a hydroponic project for HA? I'm willing to pay for the assistance. if interested please msg me,
8.7% in Denmark it seems
Us numbers to be released at 830am EST it seems
Expected to go down, so probably going up

Do you ever listen to us here, there is no support in this channel
Also reading the error helps a lot
but why theres no spotify

Just mirigated to latest hass
More helpers
that the old version
Yes, the #the-water-cooler channel really needed that image spam...

opps
Finally
Now i know what i have missed out after update
did I hear raccoon spam?
Now I wonder, are there cat breeds that look like raccoons?
why get a cat raccoon mix, when you can just get a raccoon?
So it did actually fall
8.7 for the US
So Germany and US are falling so far
France up, Norway up, Denmark up, UK up , Sweden up
So you are telling me, printing money out of no where and giving it to people and having ruined the economy is causing a major inflation?
idc about what the offical places say
the inflation feels more like 20%
Bringing my car in for some warranty fixes tomorrow, curious how much they are covering in costs since they have to dismantle the entire roof, two doors and part of the middle console and brakes
If it's under warranty it should be all of it
My last car had the gearbox replaced under warranty, which was a multi-day job, and they covered the whole thing
Had a friend of mine with a e class Merc, they replaced the sunroof
It was. £18k
He paid nothing though
I do love that 7 years warranty is pretty standard these days
I do love that my car‘s 33 years old and had none of these mayor damages 🐒
Yeah the problem is the difference between the product portfolio that is considered for the inflation calculation and the real expenses someone like us has
And that’s not nearly the same
This your car?
No sunroof to go wrong!

just to replace an led that burned out that lit up the safety belt warning light huh
nah, they are replacing the roof curtain engine, the panorama roof gaskets, three wooden door trim panels, the leather trim in the middle console and troubleshooting the parking brake pistons
didn't you just buy that car?
Yes, it is 4 years old though
And everything is on warranty
For three more years
Gotta get them to work for it 
Anyone using roborock?
i do
Ever swapped out an older gen with a new one? Wondering is map coordinates will be compatible
no, i'll keep using mine until it breaks
yis
Used EV price has increased by 43% last 8 months
I got it
Crazy
You Norwegians wash clothes?
This capability is one of the few things that I like in Slack and wish that Discord offered: https://support.discord.com/hc/en-us/community/posts/360037068211-Keyboard-shortcuts-to-go-back-forward-between-visited-channels
In Slack, Alt+Left/Right behaves kind of like in the browser: go to the previously visited channel or go forward through that same stack to the last visited one.
It is one of those things that I al...
I see some references to ctrl/cmd-B, but it doesn't do anything for me: https://support.discord.com/hc/en-us/articles/225977308--Windows-Discord-Hotkeys
Just because i'm too lazy to lunch my game, i made homeassitant to it for me https://www.youtube.com/watch?v=cYAEsjZch0c
"Alexa, je veux a final fantasy" in french mean " Alexa I want to play final fantasy "
I enjoy this jellyfin server. New episodes just magically show up thanks to *arr. It comfy
it is pretty great
it's easy to forget the magic that's happening in the background
I'll have to look whether I can set it up to auto download some series onto the tablet
since I'll commute by train starting october. So it might be nice to always have the latest episodes of one or two series on that
I've always wondered what incentive the capture/distribution groups have for doing what they do, beside playing Robin Hood
liberation of media? 😂
it does want to be free
honestly, I'd like to do some scanlation or maybe translate some LNs at some point
To force myself to fully translate/understand some more texts to practice Japanese
but for those that really just grab them? No idea. It's not even private tracker credit I assume
Access to more content, in better quality and as raw files, unlike shitty streaming services that force their arbitrary limits on to you for a nice budget of 10-15€ a month
I'm talking about the cap groups that distribute the material, not the users who consume it
but they already got that. What's the incentive to share? Do they run patreons? o.0
sharing is caring, when no one would share, no one would have
one hand washes another
and if you can do it, without getting stupid penalties, why not do it?
on that note https://img.pr0gramm.com/2022/08/11/9c645634fc3c4a9d.png 😂
BBSs and warez groups back in the 80s/90s were about a community of like-minded individuals and usually restricted membership. There are so many public trackers out there with anonymous folks just grabbing stuff that the motivation seems less clear
the groups get some publicity, but for what?
That has been normal on Plex for a decade
no clue
i looked at some linux isos recently and the majority of them were from russians
I mean, I do get the "information wants to be free" and the fact that distribution is practically free now
it takes some time and effort to produce the high quality stuff that's readily available immediately upon airing
Like and subscribe
and presumably somebody is paying for it?
Covert onlyfans to piracy groups
yes, but the overall cost is lower then streaming services
yea, but plex leaks memory and crashes a lot for me. So there's that
imagines the onlyfan of the clichée neckbeard anime fan
ain't nothin' getting that out of your brain
you and your daki review channel
That's just because you live in the 00s with htpcs
¯_(ツ)_/¯
There once was a time, where the majority of people were onboard of pirate ships.
Then came netflix, who hosted pretty much anything your heart desires for a fair price.
But after a few years, companies got greedy again and everyone started to pull their media from netflix & started their own streaming services.
Now you gotta pay >40€ a month for streaming services, in order to watch all your heart desire.
Welp, i want it easy and simple, not complicated with a stick forced into my ass. So back to the pirate ship it is.
#metoo
i dont find anything interesting on it anymore, already cancelled my amazon prime subscription months ago
40€? isn't hat just netflix these days D:
also, once upon a time, the public railed against cable subscription bundles and wished that they could choose ala carte. Then they got it
Netflix alone is like 15-20€
I mostly have prime due to the integrated twitch sub and shipping
My parents use the prime video
I had prime for 2 months, only watched the grand tour
i barely use amazon prime anymore, if i do, i'll just take the occasional 30 days free trial
I'm lazy and like to buy 2€ worth of micro electronics with free next day shipping
I've started to see free delivery by 7am the next day
We don't have Amazon prime, heck we don't even have Amazon here
I'll keep my 12 days from china
you also live in frozen caves, I hear
Mud caves
aliexpress
According to Midwesterners
ali tends to be next month at best shipping
buy stuff with 15 days shipping
all of which is significantly more than 24h
I do like the occasional surprise package I ordered months ago
but not for everything
13€ netflix HD content and 2 streams at once / 18€ netflix 4k content and 4 streams at once
8€ Disney +
8€ amazon prime
29€ a month and you still lack quiet a bit of content, that you could get for free being a pirate
so 3,75€ a month for pretty much all content

i'm paying with my nerves, to setup my jellyfin server
as i ruined my proxmox install yesterday :|
don't forget the vPN
No vpn
your ISP won't
no vpn




