#general-chat
1 messages · Page 191 of 1
@late fulcrum managed to coat the bottom of a jar in phosphor from a dead CFL
(yes I know, mercury, am being careful)
Soooo... If I were to set that up on my SATA SSD it might improve performance?
If you want to set it up on a fast computer, you should run something like a miner or compile a game in Unity while "it checks you computer on whether or not it will benefit from it"
Although 2GB RAM on Windows sounds like a torture method - 8 is the absolute minimum if you want to use it within the next day instead of year
Hmmmm...I wonder if they sell RAM in USB drive form so you can use it like a drive but you then dedicate the entire drive to readyboost
Specifically ram doesn’t yet exist in usb stick form, due to the fact that usb write speeds weren’t ideal for true ram. However, they used to market some flash drives as readyboost capable…
I wonder if usb c’s extra data lines could get there.
You could use an entire fat16 drive for readyboost though
It’s not real ram, but it does help improve system efficiency when dealing with a series of often repeated tasks
I would like to see a product that is basically USB 3.1 RAM that is really big (like 32GB) that is used for fast file storage
Apparently it’s not enough for actual ram
It has to compete with the growing capabilities of pcie so it makes sense
Apparently usb 3.1 can get 10gbps while ddr3 ram can range from 6400 mb to 12800 mb per sec
But a SSD only offers 50-250 mb per sec
So if it used usb 3.1, maybe it might be useful :/
I have like 200 Windows open
Lol, ancient SSDs... Modern PCIe 4 drives can go over 7Gbps
USB 3.0/3.1 Gen 1/3.2 Gen 1 is 5Gbps, 3.1 Gen 2/3.2 Gen 2 is 10Gbps, and 3.2 Gen 2x2 is 20Gbps
DDR4 3200 is like 27GBps
USB naming scheme is all f***** up
And I hate it when companies use gigabits instead of gigabytes
I dunno why they thought renaming things was a good idea
5Gbps should have stayed 3.0, 10Gbps should have been 3.1, 20Gbps should have been 3.2
Exactly
Storage has the issue of being measured differently by manufactures vs. Operating systems, so that's confusing too
A kb will always be 1024 b
And it should
If I was president, I would get Congress to force companies to switch to gigabytes and use 1024 instead of 1000
Kb is 1024b, KB is 8192b
Kilobit and kilobyte????
Capitalization matters
AHHHHHHHH
kilobits, megabit, and gigabit should not exist
Or terabits eventually 😂
Plus everyone is wrong most of the time anyway... The base 10 system is kilo/mega/giga, base 2 is kibi/mebi/gibi, and everyone just uses the former all the time
Kibibyte sounds wrong in my mouth 😂
I work at home and don't have to talk out loud much so I don't have to enact that sin quite so often
otherwise I'd have way more to my name
I do write KiB / GiB and whatnot
I'm lazy and just use KB/Kb even if it's KiB/Kib, lol
I am oh so mildly annoyed at how operating systems mix the two, but I am admittedly guilty of this sin, I just can't be bothered writing out KiB and MiB instead of kb or mb
At the scales we're working with data, it doesn't make much difference anymore at least... It was a big problem in the pre-gig days
indeed
But I do wish everything was consistent XD
It is a multiplicative factor, so I don't think "scale" is exactly the right word. I think people just give a nebulous wiggle room to any storage size number, to account for several things including file system overhead, G vs. Gi, and probably some other nonsense that comes up when one deploys to a cloud compute service
Well, I mean, when we were in K ranges of storage, one file was likely to be a higher percentage of the capacity vs. now; we have a lot of big files, but many many things are far less than 1GB/1GiB, but most systems will have 1+TB/TiB storage anymore
The more egregious sin is mixing up Kb and KB
kilobits versus kilobytes, eh? lmao
For some reason I always see transfer speeds in kbit/s, and everything else in bytes
because serial
?
when you are transmitting the data on a serial connection, you split it up into a sequence of bits
serial connections were bit by bit, so kilobits made more sense than bytes
ah
whereas when stored it's represented in its word format
I saw a woman sitting in the park all by herself, surrounded by crows. Halloween is coming, nature is healing
Doing research for a (nerdy) story that takes place in 1982, makes me realize how extremely powerful modern computers are... and how inefficient modern software is. In the story, the little RK3288 Chromebook I have is the most powerful computer on the planet and all I do on it is write and look at documents.
We put incredible amounts of power into watches these days... Processing power that could have changed the world in the early days. It is kinda crazy when you think about it
just thinking something like an attiny4 with a few thousand transistors and half a kb of flash in a dual transistor package (sot23) has more transistors/switches than the colossus; miniaturization really is a wondrous thing
Indeed!
https://en.wikipedia.org/wiki/CDC_Cyber In 82, the most powerful supercomputer is capable of 400 MFLOPS, the x86 Xeon that I'm using that Microsoft finds "too old" for Windows 11 does 354.8 GFLOPS at base speed.
The CDC Cyber range of mainframe-class supercomputers were the primary products of Control Data Corporation (CDC) during the 1970s and 1980s. In their day, they were the computer architecture of choice for scientific and mathematically intensive computing. They were used for modeling fluid flow, material science stress analysis, electrochemical ...
Well, Windows 11 is dumb because they think 1st gen Ryzen from 2017 can't handle it, but yeah, things being discarded today are insanely powerful
exactly
My phone from 8 years ago is still 2x+ faster than that CDC Cyber!
There is definitely an economy of software bloat. Part of it is the economic model of planned obsolescence, spearheaded by Apple. And part of it probably has to do with the trajectory of silicon valley / big tech, in that it might be cheaper to develop and maintain a bloated Electron app than to pay people to write small, efficient software.
Yes, definitely more inexpensive to have the end user get something newer than spend a lot of time making more efficient software
But also "why bother making it more efficient when it's cheaper to have more processing power?"
that's why my site is all manually typed HTML + CSS
https://en.wikipedia.org/wiki/Wirth's_law just found this
I think there is a common principle underlying both software updates and legislation in the United States. There is "value" to getting one's stuff into the package that will be installed into the public's life, so there is both secrecy and bloat in these packages, caused by the various players vying to push their agendas
No one pretends that statutes are small and focused, they clearly each bear a signature of incidental compromises
Por que no los dos?
I mean
If you have the option of being more efficient on more powerful hardware, it's silly not to get as much performance as possible and it's just plain rude to other applications in a multi-tasking environment not to
Part of what put me off about computer science related course work I've seen.
The attitude is "there's plenty of oomph, just write it to work"
Which is fine if your program is the only one running.
But if everyone takes that attitude when releasing for a multi-tasking environment it gets bad fast.
Well, if your program uses 0.5% of your target system's resources, it may not seem worth it... Very hard to know what's diminishing returns on optimization -- might be 10% more work for 50% better improvement, or it might be 200% more work for a 5% gain, no way to know, so why bother optimizing if it meets requirements?
I guess my perspective is different because I do custom RISC CPU design as a hobby so most of what I target is slower than most modern hardware
it's not clear to me that software companies have much incentive to design "end-user" applications with good performance. If users can't tell which of the many programs running on their machine "causes" it to be slow, it seems like they get off scot free.
in fact, pre-loading their program on startup seems like free money: the application opens quicker, while the load at startup makes other companies' software look slower.
Me: looks at chrome and CURA
meanwhile, the user's computer is confusingly slow, but not traceable to a specific company. And the computer vendors like this because it makes the hardware go obsolete faster
If you were to plug a SD card or a USB drive into it, it might improve performance
👀
It's a lot harder to repair stuff
What's the average DigiKey order price for you - mine's about 10 bucks?
I hope right to repair keeps going well
WDYM
I mean if I have to get out a saw to get into a plastic power supply enclosure, things are starting out poorly.
A-ha, gotcha now
In the land of always credit card debt, they ride spiders big as houses!
👀
Is GoT over yet?
Very
OK
ASOIAF will only maybe get finished
2 years ago, I guess
If you can tell, ||I don't watch GoT||
tbh, with the state of the books, and how bad the last 2-2.5 seasons were, you're way better off
I feel like there’s a great electronics metaphor in the Frasier episode “three valentines” where Niles can’t stand a crease in his pants before a big to-do he’s hosting, and the sequence of events leads up to him setting the couch on fire 🔥 🤣 if it’s workin’, let it be 🙃😂
Might be part of planned obsolescence... Lower end machines will become less usable as they age, and those tend to be owned by less tech savvy users who are likely to just buy a new one
[Although I have 20 year old PCs that still do things daily :O]
I have injured myself trying to undo a standard STEMMA connector
Uhoh, one NeoTrellis board isn't working...
either buy a new one if they're rich, or not have one if they're poor.
Yyyyeah...
doncha love extortion that costs the poor more than it costs the rich
At least you didn't get bruises all over your rib cage and spinal muscles tripping over a bucket of paint onto concrete
Big oof
I think I cracked a rib
Pair that with a cold and the past week has just been miserable
Coughing against a bruised torso freaking sucks
Oof
Had to do a compression wrap to ease the strain on my chest several times
Nah, but it's how I know I'm being active in life. The more injuries I have, the more productive I have been
Not as a metric just a correlation because I'm clumsy
lol
If my hands are covered in cuts, I have been using them...
I have pretty consistent damage from doing things
Thing is cuts I can do because they don't make me feel like I'm suffocating trying to get enough air in to cough but then also trying to cough to get enough air in
I literally have wraparound bruising
And I landed on my shoulder
Didn't impact where most of the bruising is which means it was shock induced
Which means I hit pretty hard
Makes sense I was swung around my foot as a pivot at full power walk speed
Chest damage is some of the worst
Yeah I just wish my brother wasn't so negligent. Half of my setbacks in the past 2 years are because of him and that is being generous
Checking out Y: The Last Man, will update if good
The first few issues of the comic were great
He left a bucket of paint blocking the walkway in my dad's shop set up in just the right spot not to see it while coming around the corner and with just enough clearance to lodge my foot between it and the thing next to it plus block my right foot from catching me
And I was in a hurry trying to put up a fence to keep his chickens and turkey out of my space that is being set up for my lab
Because he is so negligent it takes him 2 hours to realize they have escaped the pen and another 2 to do anything about it
Instead he's yelling to his friends on the internet about the woes of the world without actually trying to do anything about it and expecting everyone else to. I do my fair share of yelling on the web but I am also putting together and enacting a plan to fix what I can.
Oh boy...
Like this is supposed to be my older brother, not one of my toddler niblings
And he makes a point to remind me he is the oldest boy any time he can find a reason to.
He sounds like a man child
Cool, I'll be the older brother to my younger siblings as I always have, being the buffer between his bullying and them.
I did not have a great relationship with my older brother... He'd yell at me a lot when we were younger, and now we don't really talk'
At least when they let me. My little brother is head strong though so I don't see a need to do that anymore.
Used to have to be the guy to take the (literal) beatings for them
Or what my oldest brother called "kickboxing practice"
One time I got so fed up I choked him out and ran off to do my own thing before he came to
Jeeze
Then he played it off like "nah bruh I pretended to pass out"
No, I wiggled his face hole and checked his nostrils for breathing and then ran off
He was out cold.
Thankfully I never got into a physical altercation with my brother... If it had happened in high school I probably would have seriously hurt him by accident
It was a multiple times a week thing for me.
And after a while he learned I would fight back and stopped. But that was after I wasn't half his age anymore.
His justification as an adult?
"I was preparing you for how the world is going to treat you"
Umm... The world was already treating me like that no help needed from you...
High school had some danger, and I became danger
I was done being danger after getting expelled from middle school for the second time.
oof
Y: The Last Man is pretty good so far
Was required to take anger management therapy after the first one... In which the the therapist effectively told me to turn alllll my anger inward.
I was 14.
Still untying that mental weave.
Well that wasn't a good therapist
Nope.
Not at all. Seems to be my luck though.
So I find I do better therapy for my own dang self because I tend to get advice that damages me further from licensed therapists.
The mental health system in my state is pretty atrocious.
I have PTSD from psych units so bad I don't go to hospitals unless it is life or death anymore.
Mental health hard... I'm a mess
They have a pattern of poking and prodding people in crisis (or attempt to induce crisis when you come in with a medical emergency as a matter of policy by asking mental health screening questions when they aren't warranted) so that you snap and they can classify you as involuntarily admitted and strip you of all rights they legally can so things are easier on their side.
It has happened all 4 times I have gone in for mental health treatment and they tried to get me when I went in for something medical most recently but I gave them that look like "are you trying to have me involuntaried?" and they knew what I was saying without even needing to say it because they immediately came back with "we have to ask these questions because you have a history"
So it is a matter of policy to dredge up terrible thoughts when someone comes in for medical treatment if they have a history of psych treatment.
So I guess I'll just patch my dang self up unless I need an ambulance got plenty of practice and super glue is cheap
And was originally designed for wartime bandages
CA glue is a miracle
Bringing up past trauma to work on it is pretty common... But when you're in crisis mode? Yeah, not a good time for that
Ok, I stayed up waaaay too late... Sleep time, night night
Night
People keep calling me MacGyver... They may be right... This is my coffee maker now... Made from a jar, some wire, a drinking straw, and a filter. Had to rig this up because I dismantled my regular one to make a CRT from it...
I got a GPU at MSRP, didn't have to wait in line, and didn't have to fight anybody... And they had a dozen :0
Nice!
What audio channels?
To the monitors, which may have their own speakers or an audio out
DisplayPort and HDMI both have audio channels
You could use it for a small personal movie theater XD Or for like, playing movies on multiple TVs in a store, each screen can have a different movie
Yeah, I was thinking of buying a new amp.. to use with HDMI.
My 1999 Pioneer just won't be as capable.
You can just get an HDMI audio breakout and use the classic amp :O
Nah. I'd rather reduce cabling where I can.
Old boi will end up in the mancave. 😁
Fair, lol
Pioneer VSA-E03
I have a Pioneer stereo stack from the 80s I need to set up again
I paid £200 in '99
noice
😁
Hooked two 12” sub woofers and played old gangster rap lol
I'm surprised nobody has questioned my graphics card beyond the audio thing, lol
I don't have any questions for AMD cards. Lol
Looks like a good throw for multi-monitor, for sure.
That's basically it XD
Should be good for the Command Center. 😎
It's an ancient GPU that's been tweaked to make it good for high res multi-display but not much processing power, lol
Yeah, I'd go for something like that if it was for work.
It's going into a workstation that currently has 2 cards, but I can't really use them because I get BSODs when I try to have it do work...
So the cards are relocating
Whilst I have 6 screens, those are across 5 systems.
One of which is a personal machine.
I have 6 on one, one system with 2, 5 or 6 with 1, and like... a dozen headless?
Servers are mostly on a VGA KVM
Gotta go shower, ttyl!
Thankfully, I only use 2 machines at home. Lol
quoting the photo'ed box
or you could set it up for surround sound
with 6 channels you could do full 5.1
actually
there's stereo on each, huh?
which means you could do even more
howdy y'all
Hello! Welcome if you're new
Nah, I've just not been around for a while
welcome back!
Y: The Last Man continues to be good
🤣 mega maker score hahaha fully intact win98 pentium PC! ⛷ SKIFREE HERE I COME 🤣 now to make it run circuit py 😆😅🤷♂️
good luck and have fun making it useful again 😄
how would someone begin adapting ancient hardware for circuit python anyhoo?
hi scribblemonger! how are ya? yeah oof custom bios?!
Eh it's just a few thousand lines of ASM
And I'm doing alright, got a little seasonal depression going on from the rain making it hard to eat but other than that life is good and I have no complaints today
drat, well can't rain all the time thank goodness.
You don't know spring or autumn in NW WA lol
hmm an old pc has a serial port. that could be easy to talk with a microcontroller at least.
Yeah, or parallel port for direct GPIO control
you could even keep BIOS and just write a custom OS
not that hard if your goal is behaving like a microcontroller
hmm never thought of that. one could essentially minimize using a mobo's full functionality to just run it like a microcontroller?
thanks for your perspective! i have two dead mobos waiting for me to learn how to do this
XENIA!
Yeah it's actually something u have wanted to do for a while but haven't had the right computer to do it with
nailed!
DOC!
Overheats during BIOS meaning CPU overheats?
I THOUGHT YOU GOT BANNISHED TO THE SHADOW REALM OR SOMETHING
before adafruit electronics were a proper recycling chore and a bummer. now there is potential with every darn thing!
Nah, just a lot happened in my life and I couldn't keep up with this place
Or is something else overheating?
something else?
Mood
Well, you do have thermal sensors on your fingertips
Assuming you have fingertips
ah! i do have a handful of temp sensors. well i assume cpu because its temp ramps while all others stay the same.
i was thinking the thermal compound needs a look at. there's a chance there is not enough to get the heat off the amd.
Yeah thermal compound is an easy replacement
ok I was going to make a comment about using each of the displays in the home theater to show a piece of Exodia but decided against it
good to know that uh... well, I'm not even sure what I now know
That you remember Yu-Gi-Oh!? lol
oh I definitely remember yu-gi-oh
uggghhh
You good?
Yes.
anyone else the great search music sounds like where in the world is carmen sandiego?
lol
And then comics and books and shows
ya! 😁
I think I gotta email support
shakes lifeless NeoTrellis
ono!
sorry to hear that 🙁 well its nice when the stuff works as expected.
Thankfully I tested them all before soldering them together
good call!
Suggested by the guide as well, hehe
I always try to make a point to test all pieces before they need permanent integration... New PCs always have a first boot on the motherboard box!
best to discover a problem before it gets entangled in a project with many things to troubleshoot later
Mhmm
I wonder why the demo gets stuck like this
The bigger question... How many can I get to stick? XD
Apparently all but 3
Those pictures are a WORKING one, it's a software thing that makes the lights stick on. The not working one just doesn't register as an I2C device
On the working ones with the demo, it happens sometimes when you press multiple buttons at once
ooh ok lol
But I did a visual inspection of the dead one... I see no issue
I realized I'd probably need to post on the forums anyway so I did that XD
OWWW HOT OWW
DO NOT touch the resistor on the back of glowy circle
Yow, that's over 600R!
Big owie
Thankfully I only touched it for a moment, so no serious burn
And yup, looks like the NeoTrellis is just a lost cause, so replacement it is
Adafruit definitely has one of the best replacement processes!
Now, what to do with the dead one...
I should be able to remove the controller and wire to the NeoPixels directly, right?
if you know how to safely, sure why not 😁
Is anything really safe? :P
aye, to safe or not to safe! is not a question
Lol
i dunno as safe as we can be tasked to be 🤷
I can probably do it without losing a limb
haven't had an electronics injury yet, only made accidental fireworks 🙃
I've had many XD
and my fav blanket has a hole in it 😆
Oof
Well, my brain is starting to feel like it has a hole in it... Need sleep. Night night!

Indeed, this often ruins the blanket and makes the owner very sad.
Also on this note... You will...
Thankfully Adafruit support makes replacement quick and easy
Happy birthday and congratulations on making it another year around a flaming hydrogen bomb 🙂
Hindenburg is a great reason to be cautious of using hydrogen as a hobbyist
Because you've been here more than 16 years, but less than 18 years
Happy birthday
That’s amazing
Heh, my birthday was yesterday
Curses, FedEx really makes me scratch my head sometimes.
I’ve not had them deliver to my address on sundays before but they were sneaky and dropped my DigiKey package 20 minutes after I got back inside from taking the dog out
So it sat there overnight 🙃
I was originally told FedEx was going to deliver my Digikey order yesterday (Sunday), but then it got "delayed" until Wednesday 😦
Happy birthday! I hope it's a lovely one.
Happy day late birthday 🙂
No way
And I have a friend with the same birthday as me
AND a friend with his birthday tomorrow
Thank you
Happy birthday!
I think I figured out how to do my laser based oscilloscope
The screen will be a glow in the dark star that's melted into the bottom of a jar, then it will have UV back lighting to get it glowing, then I'll have a laser mounted to a hard drive spindle motor and a mirror mounted to an HDD arm/voice coil array
Then you spin up the laser to a precise rotation speed and just deflect vertically using a mirror
Means no need to change directions of the beam sweep so you can get a higher sweep rate and have it induce less frame vibration
Also I found out that with phosphorescent quenching, the quenched point gets brighter first, so the trace will be darker than background and the point will be brighter
Gonna look friggin sweet!
Also happy birthday @hasty quarry and happy late birthday @late fulcrum
Thank you guys
Happy birthdays!
Hmmm... Just thought about the mechanics of having the laser spin free... I either need some kind of conductive bearing tracks or I can put a set of coils onboard the spindle that passes magnets and generates electricity from the spin of the motor to drive the beam
Also means that the faster it spins the brighter the laser will be
Which is good because if it changes spin speed without varying the brightness to match, the trace will be less visible at higher speeds
So I may just do that
That way both brightness and spindle speed are controlled together
Okay so melting glow in the dark stars in the oven didn't work...
They just kind of fused into a block
Lol
sooooo...uncontrollable weight loss is scary y'all
especially when you don't have it to lose in the first place
so I set up an appt with the doc
Good idea
got lucky enough to get an appointment slot someone just canceled for tomorrow
I just hope they can refer me to a nutritionist who takes my insurance
turns out good care is expensive and even more expensive if you're poor.
Hope everything is OK
Without straying into the politics of why, I agree with this assessment.
No, it's not political, imho, fairly accurate assessment
And it's intentional. That is political so I'll leave it at that.
hello, im trying to set up c/c++ compiler and am having an issue, do you know which channel i can use to ask for some help?
it's something related to yotta
It depends on the care. Having a child on Medicaid was free for my wife and I. I have private insurance now through my work and everything that would have been covered at no cost to me isn’t anymore and is really expensive.
Yes, of course having a child is covered, they want to increase the work force.
They (Medicaid) covered my daughters ECGs and whatnot for her heart condition. My insurance won’t cover anything until I’ve paid $3k out of pocket
As an adult though, without a referral.. all I got was a annual physical and a mental health check
And a $4 copay at urgent care
If I want mental health care that doesn't make my condition worse I have to pay out of pocket with the insurance I have.
US health care and private insurance are complete rubbish
I'm on state insurance
Like for state employees?
No like bottom of the barrel for those unemployable due to conditions they can't control.
In my case a condition I need good mental health care for.
It's a catch 22
Nope, northwest
Ah..
My mother in law who is very very not in a good place mentally was released from the hospital against the wishes of her family.
Yes, I have tried to apply for disability but the systems in place are either made by the incompetent or are intentionally designed to trigger breakdowns in the mentally ill
In the south where mental health issues don’t exist apparently
That’s unfortunate that you have to deal with that
I imagine due to Covid you can’t go in office to get help applying?
I probably could do a teleconference but yeah covid makes it hard to find help
I would prefer to just be able to do it myself without needing to have someone throw me through hoops I can't jump through because someone made them intentionally too high.
I get that they want to prevent people who don't need it from getting it but it disproportionately affects those who do need it
It’s always good to be able to accept help when you need it, especially if you find an organization that genuinely wants to help.
You’re right about things being made unintentionally hard
It's like... You think I'm not already making life hard on myself due to my issues?
There's no reason to make that even harder.
I should be able to enter my info, sign a medical release, and have them approve or deny based on my diagnosis.
But that's too easy for people who are confirmed in need of help to get it. Gotta make it difficult so they can prove they reeeeeeaaaally need it...
Anyway I probably should stop before I get banned for speaking hard truths.
Looks like most posts weren't super on topic?
Yeah it got tangent-y
This workstation looks less shiny now XD
But my Crunch rig has moar POWAH!
Is there a linux command line utility that can tell me how much power is currently being delivered by my laptop charger? I don't see that info in the output of upower -i.
Yippee da de
I guess the questions were about general RP2040 stuff rather than RP2040 PIO
Herbal teaaaaaaa ❤️
You know technically coffee is a type of tea
A drink made from steeped plant materials lol
Though it doesn’t fall under the strict definition of having tea leaves in it so it’s not a ‘tea’ in that regard.
Only a tea if you classify anything you steep and drink as tea
Actually.. I believe it would be a stew, or broth.
Actually it would be more of a tisane
Herbal ‘tea’ usually doesn’t have tea leaves.
Tea that doesn’t have tea leaves are tisanes
And if you are sloppy with your definition of spices, since coffee beans are seeds.. the could be a spice lol
There is a coffee tea made from the cherries and leaves of the coffee plants
Also learned a new word I googling this. drupes. The term to describe the pit of certain “berries” like Olives or Coffee Beans
Just bought a geiger counter, probably gonna buy some DP uranium to test it's accuracy as well
I used to put a Geiger counter on my desk at work when I didn't want to be disturbed. Even though it's not dangerous, hearing it clicking away due to ordinary background radiation made people stay away.
Should have set it ontop of some old camping mantles or something to spice things up, though it would probably get annoying real fast
Heh, I could have. I have this uranium glass neon tube that both looks cool and emits some radiation.
I bought some uranium ore from: https://unitednuclear.com/index.php?main_page=index&cPath=2_4
United Nuclear : Radioactive Ore - What's New Radiation and Nuclear Chemistry Tools And Equipment Electronic & Electrical General Science General Interest Neodymium Magnets Gift Certificates Area 51 Restricted to UPS Only Element Samples High Voltage Solar Power Scales Chemistry, physics, biology, radioactive
I still want to get a calibration target to finish up my dosimeter so it can actually have some accuracy in the readout.
Calibration and accuracy are nice
But this is #general-chat so that's exactly what goes here. 🙂
I once covered over the "do not" part of the "do not disturb" sign on my boss's door with a post-it note. His assistant told me not to do that again.
Wait, what is the PIO part?
you can abscond with parts
it should be easy to make a contraption consisting of Geiger counter, small radioactive source behind servo-mounted door, and PIR sensor so that when someone approaches your desk, Geiger clicking accelerates...
that would certainly make you popular in the office
I need to figure out where my uranium ingot is...
just use some Fiesta plates
https://en.m.wikipedia.org/wiki/Fiesta_(dinnerware)
Fiesta is a line of ceramic glazed dinnerware manufactured and marketed by the Homer Laughlin China Company of Newell, West Virginia since its introduction in 1936, with a hiatus from 1973 to 1985. Fiesta is noted for its Art Deco styling featuring concentric circles—and its range of solid colors.Both Fiesta's original shapes and its glazes were...
Yessss, that too
Programmed Input-Output
Ohhh....
hehehe
I need more storage
I need more stability
my graphics driver crashed in the middle of working on stuff last night
Oof
I've decided
I'm going to implement a 6502 in PLDs
just for the fun and learning experience
Crashes are part of why I pulled my 1070 Ti and 2070 out of my i9 workstation and threw them on the crunching rig; any time I did intensive GPU stuff, Windows would BSOD a lot, but it's not the cards
see, I didn't BSOD, graphics just froze for like 10 seconds, then went black for another 5 or so, then finally came back
but internet videos refused to play
well, some did. youtube and a few other sites just sat and spun after that
like they were buffering, but right before the crash things played just fine
Hmm
haven't tried playing one since I woke up, let's see if the issue is resolved
yeah, the loading bar just went to 2/3 and it's still sitting there spinning
ufffff
guess I'm doing a restart
Hmmmmm
Computers weird
Many HIPAA compliant vid chat programs are a little wonky
My brain is melt
mood
I decided before I implement a 6502 in PLDs, I'm going to do it in logisim first
I'm gonna put a flashlight/lantern on my walking stick
Nah, just glowy circle pointing down, and mirrors angled to spread the light outward
ah
I shall ward off enemies
you could just make a fog machine out of a vape
should be small and light enough to embed into a walking stick
this is worrying
6 minutes to appointment
and no email yet
Uhoh
I do have many coils from those...
they are literally just a miniature infused fog machine
True
I wonder if I can clean out the junk with mineral spirits
... obviously it'll need to air for a while
nah just turn it on with the spirits soaking it it'll be fine /s
Wellll....doc thinks I have an ulcer.
Or the beginnings of one
Not like I'm under stress or anything /s
(it's probably the case to be honest)
So I got a prescription for some kind of acid reducer for the next few months to see if that helps
Getting blood work done in a couple weeks
Ulcers are very treatable!
And are caused by bacteria, not stress, although I believe stress makes symptoms worse
At least it's a treatable and not super serious thing [although they can get very serious]
I take acid reducers for acid reflux, they work very well.
I have an iron stomach
I have a tin stomach and a paper esophagus
Acid reflux actually killed my grandfather, they didn't have acid reducers in his time and the constant acid in his throat gave him esophageal cancer
Glad I live when I do
Oh jeeze... Yeah, stomach acid is serious business when it's places it doesn't belong
unfortunately the prescription never made it to the pharmacy...
and they wonder why I have trust issues.
I should get a PlayStation
I really want to play the new ratchet and clank, that's the only reason I want one
oooh I think you can do the spyro reboots on PS4
:0
oh fun fact, you can't convert larger than 10 bits of binary to hex in both excel and google sheets. Weird limitation
Maybe I should just get a newer one with ports of older games instead of the original console...
now you see, that may be the practical option, but it certainly doesn't have the charm of the original machines (he says, trying to rationalize making another purchase of old gaming hardware and keyboards) XD
Lol, that's very true, and a big part of why I was thinking of getting the original now
..and this is why the cool kids all have semiconductor fabs in their basement.
@lusty fossil that's what Python is for 😉
I took apart a PS2 last night
Has a bad optical drive so I'm seeing what kind of beast I can create with it
Same with an original Xbox I got
Hackery!
Indeed
Unfortunately all the big chips are bga
So I'm going to have to do firmware hackery
I found this ENORMOUS vape, curious to see how big the battery is
You sure that isn't a CO2 canister for paintball? Jeez
Banana Shake paintball canister :P
lol
all jokes aside, banana flavoured CO2, a tasty asphyxiation hazard
Keep out of reach of children
I wonder if chamomile herbal tea and coffee would mix well...
The whopper junior is such a scam, it's like 2/3 the radius of a regular whopper and is not priced accordingly
Whopper Sr for life
The entire place is a scam, they don't sell real food
just have bad taste like me, it's great! and cheap!
I'll stick with the McDonald's dollar menu XD
I could have gone to mcdonalds, but I wanted lettuce
You could have gotten lettuce :O
AH FRIG I SHOULD HAVE GOTTEN TACOS
I almost got an alaskan cod taco
Day is ruined
Alaskan fish is best in alaska, but it's pretty good on the rest of the west coast
chonk
is that Watt-Hours?
Yup!
interesting, usually I see Amp-hrs but that's just as reasonable a metric
are there a lot of teenagers and 20 somethings near you?
Asking for non-creepy reasons
Just wondering if that's who's tossing all these vaporizers
Probably XD
The kids are, mostly, alright
I dunno if they're dropping them or tossing them -- some of them are flat and dry, some still seem full of fluid and batteries pretty high
Man, I'm sure a sociologist could figure it out
free batteries heh
Yissss
3.26V yissssssss
I bet I could run a sensor for a loooong time with this baby
Wanted to play with wireless charging so I made a thing... Gotta make another one now lol
Don't worry this is just for testing! If I put this into the laptop design I'll 3D print a recessed space for it in the frame
Possibly even with a steel plate space too
And yes I did this with tape and notebook paper for the substrate
Wrapped some fairly fine shellac coated wire around a small jar for the coil
Is that coated wire?
Yes
ah I misread, it's late
If I remember correctly it came from a hair trimmer coil
(the reciprocating tiny scissor kind that just drives it off mains to actuate)
I think they just call them "clippers" in the cosmetology industry but it has been forever since my sister talked my ear off while cutting my hair lol
Anyway we had a lot of very hairy people around growing up so we went through a lot of those things (gummed up from so much use because we have been blessed with flowing fonts of locks that never cease to spew forth from our heads) so these coils were a pretty common thing for me to turn to when making electromagnets
This is one of two that I still have laying around
So much wire on it lol
It's basically a straight up spool of motor wire...
Started out wrapped all the way out near the edge of that lip
The JLCPCB website is soo slow for me always
honestly i think it's because I have IPS/IDS running on my network
IPS/IDS?
I think I might turn the body of this vape into a flashlight -- the end might make a good diffuser!
I see you're of refined keyboard taste
PCMR, yo
Everytime I use a keyboard that's not RGB, I die a little more
lol
I still love my IBM Model M
Hmmm... Do I want to go the easy route and get a single CR1220 for $0.95 from Adafruit, or search eBay to get 100 for $3?
IPS/IDS is Intrusion Prevention and Intrusion Detection system
Intrusion detection systems (IDS) and intrusion prevention systems (IPS) are security measures deployed in your network to detect and stop potential incidents.
intense nodding
membrane buckling springs just slap
Hello guys I am participating in a pcb desiging competition can someone suggested good software to get started
It would be helpful to me if it was free
I've heard KiCad, I'm way not an expert though
no clue, just heard the name in a podcast a few times :-)
I assume it isn't garbage, but I have no PCB layout experience
I'd ask in #help-with-hw-design
oh ok I havent noticed that channel thank you
I hear KiCAD a lot
No, but only if you get overwhelmed by lots and lots of options. Once you know what you're doing in the UI it's amazing
Man, solder bridging these NeoTrellis boards was WAY harder than I thought... I guess solder bridges only want to form when YOU don't want them to!
Yeah, that's what I was thinking, but I wanted to do it the hard way XD
Tack one end, bend the other down, then tack it, then flow from the first side to the middle, let that solidify, then go from the other side to the middle
Same technique as making traces on perfboard
Even works with fine coated wire
If you know how to easily strip the coating while you are soldering
Takes a bit of finesse
I think I will just do wire for the rest... Maybe redo that, I don't like how messy it is
I mean
You already got it halfway for the second technique I know for using wire
Second one is tin the pads to be bridged, tin the wire, then push the wire into the tinned pads with your iron
Just gotta get rid of the blobs and tin some wires and you can get it much prettier
You do want a bit of solder protruding from the pads though, just not that much
I started myself a daily routine.
I have many daily routines
Unlisted items naturally follow from listed ones
And as such are unnecessary to list
I'm first focusing on fixing my sleep schedule. And no, I don't think it's broken. I'm using the other form of "fix" meaning to hold in place.
I found that if I sleep too long I am sluggish all day. 7hr is like my maximum unless it was a lot of physical labor the day before.
I miscalculated last night thinking I gave myself 7 but I woke up this morning, felt great, and then someone pointed out that I only put 6 hours of sleep in my schedule. Screw it I'm keeping it.
Life is too short to sleep an extra hour every day
I miss sleep
Dreams are a dreadful place for me and often cause me to wake up in a sour mood if they go on for too long.
Last night I was dreaming of things that looked like they were out of those scary stories to tell in the dark books...
But fully realized
It was awful
But I'm awake and none of it followed me to the waking world because I woke up soon enough to not be fully inundated with the horror
I mean I remember it but it isn't hanging over me like a shadow threatening to ruin my whole day
I think for work today I'm going to finish designing Proto-ITX
Or rather
Not necessarily finish but make significant progress on
I know what I need to do for the pad designs, I know approximately how I want to lay everything out, the only thing holding me back is me
Greetings from IEEE-VIT!
We are a team of tech enthusiasts who absolutely love to do cool projects and host international events and as a part of 8th edition of Hacktoberfest, hosted by DigitalOcean, IEEE-VIT brings to you FOSSFIESTA-code your way! 💯
An unparalleled event comprising two sessions on open source development and GitHub followed by a 8 hour code sprint on our 6 bespoke projects.🖥️
Join us on 2nd of October, 2021 at FossFiesta to learn, code and contribute to various open source projects out there and ofcourse win exciting prizes!🎉
Register now at https://fossfiesta.ieeevit.org/ and to keep yourself updated. Hope to see you there soon!🙌
Code your way through Open Source
Ooooh that looks fun... My schedule just got packed full because I decided to go from being my own boss to being my own employee last night (total mindset paradigm shift that may completely change my outlook and help me to go much faster than I am)
But I'll see if I can squeeeeze it into my hobby time in the evenings
I just have horrible, painful nightmares that never leave
Only difference between life and a nightmare is that this one is shared with others. If you follow the same approach to surviving a nightmare of finding balance and control over your immediate surroundings long enough to solve the problem at hand, you will do fine. In life though, others are struggling through this nightmare right along with you and if we don't help each other we will become each others' monsters.
No clue where that came from my brain just kind of threw it out there lol
Thankfully, I'm capable of lucid dreaming.. so, nightmares are fun. 😁
My problem in nightmares is like... Shadow monsters that distort the rules and are just plain vicious. And I can control dream elements, but it's just a never ending ramping of power and "reality" breaking
TFW you learn micropython works via UART and is supported on older ESP-based devices...
Does lucid dreaming count as a nightmare at that point? I feel like the scariest part of nightmares is the feeling of being there, and the ability to detach from it just kinda breaks the effect.
Most of my nightmares start with me having all sorts of strength and sometimes flight, but as time goes on, more and more monsters show up and I lose flight if I have it, I lose the ability to break down doors to run away, and eventually I just can't move my legs fast enough to do more than crawl.
Almost feels like an analogy for life...
Ehh, I dunno what to call them... They're not really scary since it doesn't cause any true damage, but it hurts like all heck
I get ripped apart eventually
Lucidity does not necessarily mean control over even your detachment state in dreams any more than it does while awake. Just means you are fully aware of the experience.
Including the knowledge of whether you are waking or sleeping
So I would argue that detachment from it is actually entering a non-lucid state
In the same way that it is while awake and lucid, then becoming (either willfully or not) detached from the experience
thanks for sharing your experience bro
now I am using easy eda
Aight, not quite sure what that is but I'm sure I'll get curious and Google it later
Of course, any time my experience is relevant (and sometimes even when it isn't lol) I am happy to share
Noooo
RIP, time to wire it from the other end...
Gotta put those things in a case, those solder connections can't handle much stress.
I was setting up soldering
And actually, this is better than my dumb idea of trying to solder to the teeny tiny hole next to the pad
supplier taking their sweet time to get back to me, but thanks me for my inquiry. 5 days later I only feel a little bad about replying "thank you for your attention to this". Maybe a little more than a little
unboxing: esp32-s3 devkits
My wife just found out that I replaced the bed with a trampoline..
She hit the ceiling!
😁
But actually imagine trampoline bed
That's getting into not-PG territory. Lol
if my wife found me doing that she'd have the explaining to do, since I'm single
Fnaar
There is a $150,000 car in the parking lot of my work. It's surprisingly ugly
I... I'm not gonna ask
Yeah, I've seen more than a few...
Karma Rivero specifically
It seems to be a hybrid with only a 30 mile electrical range
300 on gas
pretty poor range for 150k
I like my 2014 Honda Civic LX, she's my baby
I almost got the LX, but it was more debt
is that electric?
Hybrid
FWD and Hybrid.... Boring.
Glad I don't have to drive it..
..... and it's an automatic. Lmao
I might mod my car to be hybrid or electric one day
aren't all hybrids auto? Most are CVT right?
Something like that....
I had to travel over 100 miles to get a manual, myself
It's not like a proper gearbox is going to suddenly make it all exciting, so.... Ehh
but I love the crunching when I miss a gear
shudder
Yyyyeah no thanks
not that I'm driving that fast anymore anyway
But I like being able to FLOOR IT and not have to worry about acceleration slowing
She did mention something I thought odd...
The transition from electric to ICE seems odd, to her... Apparently the car lurches with a moment of sudden acceleration.
I know.
Just not 100% on the whole hybrid thing.
I would have thought that switching to ICE would reduce power to the wheels...
No, it just creates electricity
Generally
Many hybrids are just electric cars with a generator and a smaller battery
So, it's a generator... Not a part of the drivetrain?
Generally
Ok, that's even moar odd.
There are hybrids with a mixed drivetrain
Hummm
Bbl meeting
Welp... I'm going for a 4:20 break.
Someone covered my car tires with suction cups and it's driving me up the wall!
😋
Kinda funny how fixing broken connections in the brain makes them so much stronger than they were when they were in short term memory
I guess fixing them tells your brain that it’s something worth fixing, and to not free up the resources
I’m learning japanese in school (after self teaching for a bit more than a year so this is so smooth sailing right now), and my technique right now is to not look at my notes, but sit down every little bit and suffer through remembering everything we did in a day. Really reinforces things
I wish I could language
great feeling, when the article you're reading about a problem you're having has a link to a discord channel
I would be forever a robot then 😂
of which UnexpectedMaker is a member! woah!
Depends on the car - second generation Chevy Volt can send power from the engine directly to the wheels. First generation couldn’t.
Cars complicated
But general types of hybrids are full electric drive with a generator for range, mixed drive that uses ICE for high power and electric to add torque, and mix that can switch from electric to ICE and back as needed
This (in particular, the Votrax chip) might have confused a couple of people.
There were many confused people in the comments
Oh, I'm sure, that is quite a selection of chips
I'd be lost
biggest let down of tonight's What If?... is ||they didn't get James Spader for Ultron||
Going back to earlier in the convo, not the first generation Honda Insight. It was offered with a 5 speed or a CVT.
But that was back in 1999-2005
I knoooooowwwww
Ruined it!!!
Lol
Need to watch
Do.
Soon™️
Does anyone know of a list of "maker" companies? I want a job where I'm building things with other people / making the world better. The only companies I can think of are formlabs, prusa. Right now I feel kinda unfulfilled with tech and a lot of it seems boring to work on or vanity or advertising.
I don't know of a particular list, but I know the Adafruit jobs board has a lot of things. https://jobs.adafruit.com/
Find maker jobs in 3D and CAD, Art, Design, Education, Embedded Development, Engineering, Fabrication, Marketing and Communications, and Web Development
Seeing as you mentioned Prusa and Formlabs, there are plenty of other companies in that industry that are "maker-friendly." In fact, outside of the REALLY big industrial-focused players like Stratasys and Prodways, almost every other 3d printer manufacturer can be classified as exactly that.
Outside of the 3D-oprinting industry, you can also consider any of the major "maker" manufacturers and distributors. On the electronics side of makers, there are companies like Adafruit and SparkFun who design and sell these maker-electronics devices all day long, and companies like Digikey who do everything they can to get these product into the hands of whoever's looking for them.
MY recommendation is to find a product, series, or manufacturer whose purpose you feel you can resonate with. Then, start your search with all the companies involved in its design and distribution. You might not get a hit right away, but you can certainly grow your search outwards from there.
Also, are you looking for something of a specific engineering background, or are you more on the business side of things? Because the latter has way more options than I just mentioned...
Greetings from IEEE-VIT!
We are a team of tech enthusiasts who absolutely love to do cool projects and host international events and as a part of 8th edition of Hacktoberfest, hosted by DigitalOcean, IEEE-VIT brings to you FOSSFIESTA-code your way! 💯
An unparalleled event comprising two sessions on open source development and GitHub followed by a 8 hour code sprint on our 6 bespoke projects.🖥️
Join us on 2nd of October, 2021 at FossFiesta to learn, code and contribute to various open source projects out there and ofcourse win exciting prizes!🎉
Register now at https://fossfiesta.ieeevit.org/ and to keep yourself updated. Hope to see you there soon!🙌
Code your way through Open Source
60 available in stock right now. Limit 2
nooooooooo, I just accidentally flicked a tiny piece of unknown metal from my table into my miso souuuuuuup
Odds it's vibranium and I can get super powers?
I'm disposing of the soup, but I'm not at all happy
I want that on the official record
hopefully more than just miso
I forget the exact flavor, but it's from Vite Ramen
Are they good? And actually healthy? I could see myself eating that if it tastes good
Miso sad. 😔
..... Sorry
I only tried the soy sauce chicken so far, but it was good! not sure exactly how healthy it really is
I mean it's ramen, I wasn't expecting super healthy
for shore
Oop, no miso tonight, burgers are apparently already in process
I love getting news like that
I did feel like ordering for delivery, but I'm poor people this month.
oof
Solder shares many properties with vibranium. The solution to every problem is to add more solder. (This includes the problem of "how to remove solder.")
What the f
Wha?
Nutrition packed soup
It’s like someone took a protein and calorie shake and threw it in a blender with a fistful of multivitamins and called it ramen….
And a splash of Metamucil
Healthy!
Unlike the 15¢ packs that are basically sawdust and a LOT of salt
Unrelated, I don't understand how people can listen to music in their car SO LOUD that you can hear it 2 blocks away and it sets off car alarms
Like... how are you not dead and/or in agonizing pain
I mean deaf
A small subset of people have no regard for themselves (their ears), or others (our ears)
I mean, some folks just listen dangerously loud, but there's a point where loud not only means damage, but also causes pain
And like, sometimes they're listening loud enough to make my chest hurt!
MCT oil is generally good on keto, but this is too many carbs to be keto. And outside keto, that's pretty high sat fat.
Other than that, this nutritionally enriched ramen looks very cool
Also the yellow box on how they treat their employees (if true) is 💯
So like I said originally, at least health-ier than cheap packets XD
...something something first documented case of scurvy in a hundred years...
lol
I'mma put this on one of my PCBs at some point
Preetty much all of my PCBs contain some sort of a pun.
Hehehehe
Oh nice! Less than the daily value of sodium even!
I'm shocked.
People are often shocked when they find out I'm not a qualified electrician...
Hello to you. Considering the fact that a soldering station is expensive I would like to have the possibility to make a small circuit allowing me to vary the voltage or the current in order to vary the heat of a non-variable 65W multimeter bought in trade. Is it possible to vary this heat by changing the voltage or the current?
Please don't multi-post your queries. I answered you in #general-tech.
Greetings from IEEE-VIT!
Hacktoberfest is back and so are we! This hacktoberfest we have got everything covered from apprentice level projects to fascinating intricate ones at FOSSFiesta-code your way! From classic hangman in React, to TUI tool for boilerplate templates in Rust, to intelligent auto-grader using OpenCV, to obstacle avoiding bots and much more!
Tune in by 11 AM IST at http://links.ieeevit.org/fosstakeover and by 4 PM IST at http://links.ieeevit.org/gitsetgo tomorrow to learn, code, explore the beauty of open source, and have those PRs merged!
You can register now at https://fossfiesta.ieeevit.org/ if you haven’t already. Check us out at https://github.com/IEEE-VIT for some amazing projects. Hope to see you there soon 🙂
Are you unsure what Hacktoberfest is? You won't be after Open Source Takeover since we've got you covered from the beginning of open source contribution thro...
Git.Set.Go will help you cover the topics of Git and we will help you find your very first contribution to open source with a PR. This will indeed give you a...
Code your way through Open Source
Hi @worn olive . We got your message yesterday. Please do not post it again.
It has been posted there once already, so posting it multiple times here is only going to hurt your turnout haha
Rood good
well, all the areas directly over the floor have a roof...the edges need a bit of overhang
rood goof?
like a "prank"?
hides
Is it also unsafe to sit on the top of a step ladder?
a very short ladder
being underweight helps with that
It's like 3 feet, my knees are bent with my feet on the ground
but people fall off of bar stools all the time!
that's their problem
I know, I just took it a step further and replaced the f but swapped the letters
Sitting is danger
I just realized why I can draw circles so well freehand...
Lots and lots of failed transistor drawings in schematics...
And I usually draw up schematics in pen...
Because apparently I have a penchant for tedium and rework...
But also I think I figured out how to make an oscillator from first principles using things I have around me... Just have to finish the design and plop it in a breadboard
Does this make sense or am I not brained
The idea being charge the cap and when it goes above zener voltage, trigger transistor to dump cap
Added a resistor and LED between the emitter of the transistor and ground
A few loafs of bread 2040
Let's see what happens
I should buy a loaf of bread
Is there a gluten free version?
I think they're all gluten free
stares in keto
@tardy badger do you have a nutrition sheet for Bread?
100% daily header pins recommended for your breadboard
Also 0% daily recommended lead (lead free solder)
Why does lead solder still exist?
Perhaps we could say NaN%
NaN%d
0/0 recommended units of lead
I think 100% daily recommended lead works too
Because it's easier to solder with?
0% and 100% of 0 is 0
How?
Flows better in my experience
Though to be fair I have only had access to cheap versions of both
Never had a problem with flow
I haven't used solder with lead in... 10? 20 years?
I've noticed at least with the cheap lead free solder you have to have extra flux to make it not blob and make spikes
And I don't have extra flux.
Yeah it just hasn't worked for me
With the products I have bought
Lead solder always works even when I go bottom of the barrel for price
This works perfectly for me
And how much is that versus the cost of a 10lb roll of lead solder?
It was cheaper than the 1lb roll with lead next to it by like a dollar
Huh, pricing must have shifted since I last got solder which was a long time ago because I still have a bunch of the lead solder that's been working for me for years
But I won't be using that for commercial products for obvious reasons
I buy infrequently too XD
I know of one place in town that uses all lead for all their soldering, but they are
a DoD contractor so I suspect the rules are different
Yeah I mean who cares about the environment when you're blowing people up.
Obviously not my viewpoint here just being hyperbolic devil's advocate
I thought DoD equipment had to be RoHS compliant
Depending on where their products are going (like space) there are different rules for solder to use
I'm not sure the reason, but they are producing a lot of decades old tech to interface with old bombers apparently
For instance tin solder is a nogo for space
what do they use for space?
Oh actually that's a solid point
Copper/lead solder
Tin "grows" whiskers and shorts
When it shifts crystalline phase and gets powdery
Ahhhhh different tin issue
Okay noted will not use tin in my space equipment
I think there are other lead free and tin free solder options
I mean if you're going to space and the boards aren't meant to interact with biology does it matter if there is lead in it?
the Prime Directive prevents us from polluting alien worlds
So you reserve all lead solders for high orbiters
But the EU grants exceptions for lead solder use because of not many good options for solder in space
It doesn’t matter much for short lived missions
Why not spot weld for things that need longevity?
You ever spot welded 0402/0201 components?
Plus you have to provide a lot of current which would surely destroy the components
I meant for inter-board connection mostly but that just put a hilarious image in my head
Could it be done with precision robots?
Just use slightly larger components which has the added advantage of being more robust
Especially if you upscale your IC dies to the largest they can be
larger boards weigh more and cost more to send to space
Beltalowda!
That's where I'm heading as my life goals but we know how those go
Ceres is my actual destination
And anyone willing to at very least not hamper progress is welcome. Loafers and all, just don't get in the way.
And if you want to help you reap the direct rewards
Which is why my lab needs to have the ability to do long duration space habitat simulations with full regenerative life support
Eventually
For now I'm starting with just the ability to fully seal and pressurize it with no leaks
(except the ones I intentionally introduce)
I claim Venus
Fine with me but may I offer some suggestions?
I have a plan :0
Balloons with solar panels and wireless charge pads for drones.
(for initial exploration)
Yeah I just meant before sending people
I've got a design for a thermosiphon to steal heat from below