#live-broadcast-chat
1 messages · Page 156 of 1
During a FLISOL talk I gave for a Guatemala and central american audience, I heavily recommended Digikey and Adafruit for the quality of their people and the good they do.
Digikey, Adafruit, and B&H....all the toys and tools one could ever want.
Hi folks!
Hi Stella!
Evenin' Stella!
Hi, @velvet beacon 😀
hello 'again' world from me too long outta the loop 🙂 adafruit &
discord is like a spa massage @rapid hornet @haughty quiver
Now I see Lars...
I see JP, I see Lars. I see chocolate candy bars.
(I don't, but boy wouldn't that hit the spot?)
Mmmm. Chocolate.
I just ate some frozen reesee's cups. mmm.
⏱️ 🎮 @haughty quiver's MakeCode Minute was 2min 24sec of using awesome new beta features in MakeCode! Be the first on your code block to use them! 🎮 ⏱️
Lars approves of this message.
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPixe...
Please celebrate without fireworks, they are horrible for wildlife.
And people with some types of PTSD
hello @velvet beacon !
action list and more: https://www.adafruit.com/blacklivesmatter
@river peak Good point.
Hiya @split gazelle !
What was that 24g sensor called?
(pt here) it's so important that our company adafruit, has a CFO that is active in social causes, thank you @velvet beacon
adafruit is live at https://www.twitch.tv/adafruit
Adafruit was founded in 2005 by MIT engineer, Limor "Ladyada" Fried. Her goal was to create the best place online for learning electronics and making the best designed products for makers of all ages and skill levels.
Yey NY!
We are on a second spike in CR, we are doing ok, but one always hopes the number to be lower.
My state (Nebraska) is staying just under 1.0, but now our 50% CI is also below 1.0. I hope it stays that way.
it's been amazing to see how you guys have handled this whole thing. bravo!
Yep.
this was the tuner i based the project on in case people are interested: https://www.fender.com/online-guitar-tuner/acoustic-guitar-tuning/
Yeah, Adafruit has an awesome C-suite. 🙂 Total opposite of my employer!
What are those plastic things on top of the tunners on the guitar from the video?
I think they're just what the string winds onto?
I look like an add on. New to me.
it's a kid guitar so i think it's shielding the strings from small fingers
They look a bit like those locking things like some trucks have on the wheel nuts.
I should look for a Nikon adapter that could be fun
@nova totem The difference between sensor size is quite a bit. There are some cool CS lenses, even a couple still in ebay.
Morning folks!
Hi.
Morning @ornate coyote
@nova totem seems like you could remix the canon one with https://www.thingiverse.com/thing:1722898 or similar
there is also usb-c with o-ring
BTW, last NPI, the super accurate GPS was so cool. I already showed it to some archeologist friends and went will with how precise and cheap it is.
@robust horizon oh cool. I keep forgetting now that I have a 3d printer to check for things like this there. I have lots of good Nikon lens that would be nice to use more
Is there a USB-C connector for if you just want USB 2.0 speeds and fewer pads?
Why 5.1k?
@ripe blade That's the "give me 5V" values for power negotiation.
Got it. Just USB standard stuff.
+1 on the though hole for USB connectors. My only suggestion to TinyFPGAs
@robust horizon Yes, you can get ones that are in the middle of the 2 Limor showed
Q: Sound connection has never changed in over 50 years (or possibly more) - why does that peripheral stay the same? (this may have been addressed before)
great to know -- it went by super fast
That can only do USB 2.0 speeds
@simple goblet like headphone jacks?
yes
@open girder Who mixes your tunes? That was awesome!!!!!
Yes, I like that song very much as well.
ESP32-S2-WROVER Module - 4 MB flash and 2 MB PSRAM https://www.adafruit.com/product/4653
@simple goblet if i remember correctly, the first headphones were mid-early 30s? And quickly used largely the same style of connectors.
I think they are finally changing because any plug on a phone is a way for water to get in
Order today, ships today. UJC-HP-3-SMT-TR – USB-C (USB TYPE-C) Receptacle Connector 24 (6+18 Dummy) Position Surface Mount, Right Angle; Through Hole from CUI Devices. Pricing and Availability on millions of electronic components from Digi-Key Electronics.
@ornate coyote 👍
Digilent Analog Discovery 2 USB Oscilloscope and Logic Analyzer https://www.adafruit.com/product/4652
Question: Any thoughts on the Digital Discovery vs. the Analog Discovery?
Adafruit LPS22 Pressure Sensor - STEMMA QT / Qwiic - LPS22HB https://www.adafruit.com/product/4633
@river peak @rapid hornet I have a speaker from about 1960 from loooking through my Dad's stash - from what was "CES" at the time but in Japan - and i just go -- wow! same speaker connection. So wow 1930's to now, that is really amazing time for a peripheral plug to remain the same.
@waxen thistle It looks like the Digital Discovery is Logic Analyzer with no oscilloscope.
totally!
Adafruit LIS331 Triple-Axis Wide-Range ±24g Accelerometer - STEMMA QT / Qwiic https://www.adafruit.com/product/4626
Useful for making faraday cages for the protests.
Stream's getting jittery tonight. 🤔
for me too
Likewise here for me on Twitch
Copper Foil Sheet with Conductive Adhesive - 12" x12" Sheet https://www.adafruit.com/product/4607
keep thinking it's my USB going
Okay thought it was my connection
Yeah, I thought it was just me in Australia, but seems it's everywhere.
The internet had too much coffee, it's ok.
yeah on youtube and twitch
I tough it was me... about to kick my mikrotik
Both Twitch and YouTube.
Raspberry Pi 4 Model B - 8 GB RAM https://www.adafruit.com/product/4564
and vulkan is coming 👀 https://www.raspberrypi.org/blog/vulkan-update-now-with-added-source-code/
Oh, that's cool @split gazelle !!
Adafruit Soft Flexible Wire NeoPixel Strand - 50 NeoPixels https://www.adafruit.com/product/4560
so is USB booting, no SD card necessary
ohhh that's huge
I put one of my Pi 4s (4GB) on the beta firmware and it works! You have to be careful which USB adapter you use, though, some have compatibility problems.
(same as if you're using USB to add a non-booting HDD or SSD)
Pre-Cut Multi-Colored Heat Shrink Pack Kit - 280 pcs https://www.adafruit.com/product/4559
nice! i'll have to try it @robust horizon
@open girder what's the cut-out around the AHT20 PCB for?
I can find some links for you if your favorite search engine doesn't find it
@river peak removes heat from the PCB influencing the sensor as much
@split gazelle https://www.youtube.com/watch?v=zVhYvvrGhMU
We all waited for a long time for native USB boot on the Raspberry Pi4. Today I booted the first time like that, and I show you how you can do, too. No need for an SD card anymore. Hurray!
Link:
Script with commands: https://www.dropbox.com/s/ugg1mazjhvbooxj/USB Boot Comm...
@river peak removes heat from the PCB influencing the sensor as much
@ornate coyote Got it. Thanks.
wait are those mounting holes .. or spots for googly eyes
@robust horizon Googly eye screw heads
@robust horizon hahahahaha
@river peak absolute genius
Lol.
Perhaps it’s more feedback than a question .. but thoughts on doing a few ground pins connections for the Top Secret power booster ?
Q: @open girder what is your customer acquisition cost? do you have a marketing budget for social media advertising and how well does that work?
Question I want to connect from a protoboard to a sensor that will be 1-2 meters away and would like a connector of some sorts so I don't have to have a long soldered wire. Any suggestions on connectors? I was looking on digikey and there are so many it is pretty overwhelming
Why are there two stemma connectors? A big one on the pyportals, and a small one on the cute boards.
(can we keep just the small one?)
@nova totem I'd consider a TRS or TRRS connector, aka headphones/microphones. Jacks are readily available, cables are readily available in many lengths. This is not suitable for anything that involves much current, though.
Thanks @open girder for the great explanation the marketing spend. You guys do an excellent job in promoting the goodness in your products and it obviously resonates with your customers. 👍
Thanks, and thanks @robust horizon Wasn't until I was hooking things up I had this realization that if I solder it I better like it this length forever
great question @rancid depot thank you !
Building out my EE toolkit as a university student. If I’m working with MCUs and more digital things, is it still more important to get a scope first? The Saleae Logic analyzers look super awesome. The Analog Discovery 2 seems good but I’m worried about the software...
Building out my EE toolkit as a university student. If I’m working with MCUs and more digital things, is it still more important to get a scope first? The Saleae Logic analyzers look super awesome. The Analog Discovery 2 seems good but I’m worried about the software...
@tropic raft What worries you about the software?
Adafruit AHT20 - Temperature & Humidity Sensor Breakout Board - STEMMA QT / Qwiic https://www.adafruit.com/product/4566
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPixe...
Seems clunky and don’t know if they update frequently
@tropic raft I haven't looked at it in detail, but I believe that Saleae can work with an all open source software stack (sigrok) however the Analog Discovery 2 seems to only have a proprietary software stack.
(I don't own either one, however)
I've used the Saleae and its an excellent tool. I would personally encourage you to get a scope first to learn how to use one since its a skill that will be super helpful.
Great show @open girder 😀
thanks for a great set of shows!
Thanks for the show!
I have a Rigol digital storage scope, and the dedicated scope vs pc-based scope is a whole other layer of discussion
Seems clunky and don’t know if they update frequently
@tropic raft A friend of mine uses it as a replacement for a scope and logic analyzer.
Indeed, thank you for everything you do for the community @open girder -- and thank you for another awesome evening of show 
I have a Rigol digital storage scope, and the dedicated scope vs pc-based scope is a whole other layer of discussion
@robust horizon agreed.
I have a Rigol digital storage scope, and the dedicated scope vs pc-based scope is a whole other layer of discussion
@robust horizon yeah I’ve read about that. I’ve used a scope in lab and such but don’t quite know if it is as necessary for a personal kit
If you want to process the data on your PC, definitely get a pc-based scope. It's possible to transfer trace data from a Rigol scope to PC using USB or Ethernet, but it is inconvenient so I rarely use it.
If you're not sure if you think it's necessary for a personal kit, then you're probably not doing enough work requiring a standalone oscilloscope. I use mine all the time. I would recommend the Analog Discovery 2 in your case since you get a taste of different worlds (analog, logic analyzer, signal analysis, easy export to other software for deeper digital analysis).
A dedicated scope probably has a lot more settings for input voltage ranges, and will likely come with somewhat better quality probes. They excel in the analog world. Many of the PC-based devices seem like they are a lot more suited to the digital world with limited support in the analog world. However, the AD2's analog specs are clearly better than my dedicated scope in some areas (and the scope is better in other areas). More voltage resolution on the AD2, more sample rate on the Rigol
I see. Very helpful advice! Thank you so much everyone! I’ll think about things!
If you have a local hackspace, you might check out their equipment when they re-open. Spending hundreds of US$ on one of these devices sight unseen is a bit scary!
Sounds like a good idea! The AD2 software doesn’t seem all that great, but maybe my expectations are a bit high
It does seem to do a bit of everything
Now I'm imagining that my PC-attached scope would work with a Python notebook, that could be super powerful.
Tickets for events... that so 2010's.
Thanks @open girder and good night. 🌖
Night y'all!
goodnight!
👋
thanks @clear matrix for another great episode!
Goodnight everyone
Thanks for the show to all.
Night all! Thanks for the great chat - see you next week.
Don't forget to like the video!
anyone know what's up with jp's workshop
Should be a go for today, 4pm eastern.
thanks very much😀
At what time is JP today?
?showtimes
MakeCode Live - 3pm ET Tuesdays
3D Hangouts - 11am ET Wednesdays
Show & Tell - 7pm ET Wednesdays
Ask an Engineer - 8pm ET Wednesdays
Desk of Ladyada - Random hacker times
John Park's Workshop - 4pm ET Thursdays
John Park's Show & Tell - 5:30pm ET Thursdays
Deep Dive w/Scott - 5pm ET Fridays
Thanks.
Good afternoon all you wonderful people! 
Hi, all.
Eating.
i've been playing a lot of satisfactory.
Reading, writing, making, and eating.
cool
yes, I'm finding it very tough to do anything useful (electronic-wise)
Bleeps and bloops are live on Twitch!
Bleeps and Bloops!
Same here, @cinder wind. Carpentry projects are a good focus for me right now.
yay! hn parks workshop!
I thought maybe Lars had hijacked the workshop...
YT is still a-waitin'
hai!
You mean, JP is hijacking Lars' Workshop?
not seeing it on the youtubes
Hi, @haughty quiver
Lars looks as tired as I feel today
Audio is peaking at about -6db but there's some disortion at higher loudness.
it's the mustache... youtube can't compress its awesomeness
sorry to scare your child
No clipping now.
Find maker jobs in 3D and CAD, Art, Design, Education, Embedded Development, Engineering, Fabrication, Marketing and Communications, and Web Development
can't go having a job you hate
"an enemy that follows me" oddly familiar...
PyBadge
cool!
Neat.
no offense @haughty quiver your mustache and beard would be great in a steampunk costume
That's a nice retro-styled speaker 🙂
Lol.
Wait, what did I miss
@last steppe JP mentioned your work on that sequencer thingy.
He had a honking good time.
Gotta go back to work now. Have fun!
Love big honking button
I have to get into synths... It shares a bunch of analog stuff that is also useful for building guitar pedals.
@gusty wedge try out VCV Rack. it's free software to let you play around with modular synths without spending all the money
adafruit is live at https://www.twitch.tv/adafruit
Adafruit was founded in 2005 by MIT engineer, Limor "Ladyada" Fried. Her goal was to create the best place online for learning electronics and making the best designed products for makers of all ages and skill levels.
Thanks Twitch Bot!
Lol.
that's awesome
two questions: 1: how long does it last on that battery pack, 2: is there a brightness knob?
one shall be answered soon
lol
Are the LEDs RGB or RGBW?
@cinder wind Will do. The closest I've been to that is when I play with gnuradio.
Bring a little bit of Times Square into your home with this sweet 64 x 32 square RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the ...
i think she left
The goose is in a cathedral.
what parts did you use, and where can i get them?
Thanks, @haughty quiver 😀
thank you @haughty quiver for the show!
thanks all!
Honk!
Thank you JP -- see y'all in a few!
Great show, thanks JP
Excellent workshop this week. Thanks!
i still have nothing ready to show for show and tell but im here in spirit to watch 🙂
sounds ok now.
Hi everyone.
@haughty quiver While we're in a holding pattern, what do you think of the retro green Lofree speaker you have? 📻
Very nice retro speaker.
And what about the chasis for the synth?
Instead of Hostess, you could call it the MIDI Hostel.
For the host-host adapter, I was thinking of the name "Gemini".
i new the mac made hidden files but its good to find out why it dose them 🙂
@haughty quiver Here's a shorter version of the clock video: https://youtu.be/t7I-2vPSn_E
Installation of the Musique Concrète Clock.
A hybrid repair of a damaged heirloom clock using the original acoustic whistles and chime wire. The sound components are activated by servo motors and a solenoid driven by an Adafruit Cricket, custom I2C host interface module, and P...
I'd sign up for the S&T session, but don't have the bandwidth.
You could use Clippy to short the reset pins.
i was running to show something... didn't work. For next time.
Thanks @haughty quiver and @cinder wind for the S&T!
Thanks!
good afternoon
HI Scoot. I just got my micro USB breakouts so I can start working with the ESP32-S2 and CP. Soldering the headers now.
Hi Scott. Have you used Rust for anything?
▪️Software Engineer▪️Pythonista 💜🐍▪️Speaker▪️@frontendmasters author ▪️@recursecenter alum▪️Advocacy at microsoft ▪️she/her
@rapid hornet Is that right now or after your deep dive?
Live on Twitch 🙂
Live on Youtube!
@eager matrix https://github.com/k0d/saola-baseboard Maybe this is interesting for you?
For native ESP32-S2 usb do I just directly connect D+ and D- for pins 19 and 20 or do I need level shifters?
Is @ornate coyote 's Feather ESP32-S2 publicly available?
small screen seems to be within a quarter second - - can still read lips
@rapid hornet it's improved! and now bad again 😛
@strong acorn I have a waitlist here..
https://unexpectedmaker.com/shop/feathers2-esp32-s2
Lets just forget the badness
The pin change @rapid hornet mentions isn't a design issue, just a change of which pins I am using for I2C. I'm moving from 38,33 to 9,8 - as that is what Espressif settled on for the Arduino support.
@drifting arch Thanks, II do have eagle and the Saola board so this will be reall helpful.
@eager matrix I made it in KiCad...not sure if it'll open there.
38,33 work fine as is, but as the board is not in production yet, I decided to make the change now.
@drifting arch RIght. I see that now. No prob with that. Just learning Kcad atm.
@eager matrix Tannewt also made a base-board https://github.com/chickadee-tech/saola-feather
Is the OLED 1-bit color? I wonder why i rarely see OLEDs that support greyscale.
You look very friendly, @foggy shadow 🙂
photoshop 😄
SPI vs SPI ?
i pronounce it S-P-I 😄
@rapid hornet too young for that game reference? Spy vs Spy 😉
I'm with @ornate coyote on this. It's pronounced Spy.
https://en.wikipedia.org/wiki/Spy_vs._Spy ( movie reference )
Spy vs. Spy is a wordless comic strip published in Mad magazine. It features two agents involved in stereotypical and comical espionage activities. One is dressed in white, and the other in black, but they are otherwise identical, and are particularly known for their long, be...
Ha, @timid plover beat me to it!
Is there any reason not to get the IPEX version of the ESP32-S2 module... same price, seems to also have board antenna?
Should it be pronounced 'spih'....the i is from interface...so it's a harsh i...not a 'iy'
@clever summit I always called it S.P.I. like @rapid hornet , but have now started to call it spy as it's quicker to say
oh I would very much say it is wrong :P
its like saying "eehtook" instead of "eye two c" for I2C
Pronounciaton war!
i see we have different approaches on coding, you read docs, i just take the example code and hit it with a hammer until it works 😄
"If all you got is a hammer...."
@foggy shadow same here.... @rapid hornet doesn't like example code....even if it works...right? 😄
@foggy shadow has a set of hammers of all coding requirements 😉
I have @foggy shadow 's approach 😄
I read docs if the example doesn't work.
BTW, the OpenZFS patched the nomenclature already. 'the patch removed references to "slaves" and replaced them with "dependents." '
i think it's cause i'm so used to lack or bad quality of docs for stuff that i don't trust them
Hahah, no idea @strong acorn @rapid hornet - I don't have any of the modules. Bare silicon or bust!
Well, I have some, so I'll test at some point.
@rapid hornet i saw you created a "main" branch in your fork 🙂
adafruit is live at https://www.twitch.tv/adafruit
Adafruit was founded in 2005 by MIT engineer, Limor "Ladyada" Fried. Her goal was to create the best place online for learning electronics and making the best designed products for makers of all ages and skill levels.
At first I struggled to understand the master/slave discussion....because I didn't really associate them words with the bad history. But it's really made me think...and I totally see now how bad it is. Glad to see things change! Hope it changes in other areas also.
3 different chats to follow and reply to, not surprised Scott has problems focusing 😄
Change is what we want. Outside and inside.
What's the strategy for merging ESP32-S2 commits into the adafruit repo? (automatic builds are ++ ...please! :p)
Last one I know about was DigitalIO, want to test I2C
LOL
oof, Twitch chat with the hot takes...
@rapid hornet Cool, thanks!
bit of a shame we couldn't go for tinyuf2 for esp32s2 but I understand there was some multi-level bootloader issues that made it require special treatment
wow, uf2. holly.
i copied that reset logic in tinyuf2 😄
ah, so you will implement a kind of soft reset via gpio to implement this logic?
Would using the low power cores would help here?
guess that's why they actually call it EN and not RESET
1 bit memory 😄
i have a esp32s2 board also, would love to be included in this discussion 🙂
I hope designing the esp32s2 feather from Limor, ends up in a stream... I love the digikey+circuitplayground ones.
Yeah, I miss Limor live streaming
@rapid hornet nice site...but needs more stars and stripes....
...and animated GIFs
An under construction GIF!
for those interested, schedules: https://en.wikipedia.org/wiki/2020_Democratic_Party_presidential_primaries#Schedule_and_results https://en.wikipedia.org/wiki/2020_Republican_Party_presidential_primaries#Primary_and_caucus_calendar https://en.wikipedia.org/wiki/2020_Green_Party_presidential_primaries#Schedule_and_results
@rapid hornet can you send over the svg? 😉
ah, didn't know there's party and non party ones
the US voting process is super confusing
#iowa2020caucaus 😛
i have so many sarcastic comments i'm holding back 😅
totally agree the process there is so unusual compared to anywhere else i know of
I also research on the .onion alternative URL. Github doesn't seem to have a gateway, and couldn't find a service for it.
Setting a meta tag is very simple, it's on the hosting side...
@foggy shadow hold not back? Who are you and what have you done with the real Arturo?
@ornate coyote are you saying I'm sarcastic? 😬
hahahah
Great stream, already on queue for Nina's.
This has been a stream derailed by arturo182 on all chats 😄

▪️Software Engineer▪️Pythonista 💜🐍▪️Speaker▪️@frontendmasters author ▪️@recursecenter alum▪️Advocacy at microsoft ▪️she/her
nnjaio's "schedule" doesn't show Scott for today
it is happening. not sure why the schedule is wrong
Oops... everybody back to the stream 🙂
Small recommendation for all streamers, having the date in UTC, or saying what does PST/EST/PDT, etc equals to, is a nice consideration for people of the US
Maybe it's not being live streamed - rather an interview - to be broadcast later ?
@timid plover https://twitter.com/nnja/status/1271557967150641152
PythonTea is back today at 4pm PDT with special guest @tannewt!
We're going to talk about https://t.co/xn6tRqfeLd, a tool he's been working on to help share info on voting in the US, CircuitPython & more.
Tune in on Twitch to chat with us live at https://t.co/DrZhxy1cpI
Maybe it's just missing from the twitch schedule.
Or maybe we all have the timezone wrong :þ
@timid plover it's starting.
Good afternoon all you wonderful people. Sorry I missed your stream earlier Scott, but let's just say there was an uninvited squirrel in my apartment that was asked to leave.
Scott was talking in the background on the stream and I'm herding Rocky out the door....rather surreal.
@waxen thistle he's comming up in nina's
A lot of delay and constant breaks..
Hey hackers, today Music Hackers will be hosting a Music Hackers benefit stream in order to help fight the racial injustices and digital privacy issues that are happening all over the world.
We have some donation contributors, matching all contributions to $2000! Everything will be donated to the ACLU after the stream. Stream starts at 6pm PST
We have some great artists and some artists doing some live productions and live coding of music.
If we get to at least $500 before my set, I have agreed to get a mohawk live on stream!
Mitch - Live Coding workshop
Josh Spoon - Live Ableton beat production
Bodhi McBoatface - Live Beats and Djing
DaMoth - Live Djing and Visuals
Ilya O - Live djing and visual provided by VJ Avant of New Power Generation
Ethereal - Party Sounds
Hope everyone can join!
Link to watch! - http://www.twitch.tv/musichackers
Music Hackers is a platform for experimenting and interacting with sound and technology as well as bringing musicians, programmers, artists and technologists together.
Hello all
adafruit is live at https://www.twitch.tv/adafruit
Adafruit was founded in 2005 by MIT engineer, Limor "Ladyada" Fried. Her goal was to create the best place online for learning electronics and making the best designed products for makers of all ages and skill levels.
My other favorite console, is Bunny Huangs tiny oscilloscope, which I love.
Yes, we see the volume up and down
With the linux tools in UVC, you an control the focus of webcams, so that would be a nice project for it.
Thanks @haughty quiver
Cool stream thanks. Nice holding of the CPX.
thanks @gusty wedge !
#3DHangouts Episode #278 LIVE – RGB Matrix Fruit https://www.youtube.com/adafruit/live #3DPrinting
Good morning all you wonderful people.
good morin'
good morning everyone!
Mornin' Liz and Noe!
👋
Hello all. 🙂
Bleeps and bloops.
Excellent.
@rocky reef Rocking a NASA shirt. 👍
Cool NASA shirt @rocky reef
Snap
Mornin
Good Morning
The daily Daily.
21,000 🙂
#3DPrinting projects on Adafruit Learning System Learn Guide: https://learn.adafruit.com/rgb-led-matrices-matrix-panels-with-circuitpython/example-adafruit-machine
In order to use it, do you take the red pill or the green one? 😉
"Woah. I know kung fu CircuitPython."
Lol.
"You think that's actually air you're breathing? You think you need to have explicit variable declarations? Hmm?"
That looks like one of those coil things we used to have for repelling mosquitoes.
I had a mental image of using a giant spring-powered catapult to launch mosquitoes far away....
32x64 RGB Matrix Display
https://www.adafruit.com/product/2278
Bring a little bit of Times Square into your home with this sweet 64 x 32 square RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the ...
RGB Matrix FeatherWing
https://www.adafruit.com/product/3036
Ahoy! It's time to create a dazzling light up project with our new RGB Matrix FeatherWing. Now you can quickly and easily create projects featuring your favorite 16 or 32-pixel tall ...
Code on Github
https://github.com/adafruit/Adafruit_Learning_System_Guides/blob/master/CircuitPython_RGBMatrix/fruit.py
#3DPrinting projects on Adafruit Learning System Learn Guide: https://learn.adafruit.com/rgb-matrix-slot-machine/
Lol. Rigged! 😉
PAM8302 Amp
https://www.adafruit.com/product/2130
3W Speaker
https://www.adafruit.com/product/3968
This super small mono amplifier is surprisingly powerful - able to deliver up to 2.5 Watts into 4-8 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run ...
Hear the good news! This speaker is a great addition to any audio project where you need a 4 Ohm impedance and 3W or less of power.At 40mm diameter it has a more square-ish shape, ...
3D Parts Library on GitHub
https://github.com/adafruit/Adafruit_CAD_Parts
adafruit is live at https://www.twitch.tv/adafruit
Adafruit was founded in 2005 by MIT engineer, Limor "Ladyada" Fried. Her goal was to create the best place online for learning electronics and making the best designed products for makers of all ages and skill levels.
Thanks TwitchBot 🙂
At least the bot is consistent. It's always 33 minutes late.
If it was 38 minutes, at least we could blame it on Stargate wormhole physics 😛
33 minutes is how long it takes for the Cylons to catch up with you..
I casino reason why...
All joking aside, the mounting bracket and stand for these displays is something I want to tinker with -- the gears are turning.
Learn Guides
https://learn.adafruit.com/rgb-matrix-slot-machine/
https://learn.adafruit.com/rgb-led-matrices-matrix-panels-with-circuitpython/example-adafruit-machine
video wall to 3d hangout background
Live stream background art
now for transparent filament for visor part
Thanks Noe & @rocky reef - see you tonight.
Another great show, @hard hollow and @rocky reef 🙂
?showtimes
MakeCode Live - 3pm ET Tuesdays
3D Hangouts - 11am ET Wednesdays
Show & Tell - 7pm ET Wednesdays
Ask an Engineer - 8pm ET Wednesdays
Desk of Ladyada - Random hacker times
John Park's Workshop - 4pm ET Thursdays
John Park's Show & Tell - 5:30pm ET Thursdays
Deep Dive w/Scott - 5pm ET Fridays
Thanks for another awesome show Noe & Pedro! 🙂
thanks for hanging out folks!
thanks for a great show!
thanks folks! 🙂
See you all later. 👋
good evening everyone
Good evening all you wonderful folks!
hi everyone
Good evening to everybody
Link to join to show and share your project: https://streamyard.com/dj93u9mewn
WE ARE LIVE! SHOW AND TELL! https://youtu.be/efQGo4ABkNo (in a min)
To show and share your project at 7pm today, view the chat or in discord https://adafru.it/discord and look for the JOIN link to join.
For best results be on a wired connection and have a headset and mic!
Hello Everyone
Twitchbot will advise us in 33 minutes.
Hiya!
@lavish patrol Or the Cylons will find us...
Hi everyone.
@waxen thistle 😮
Hi all!
"Time is relative. Carter can explain....if we had more time...."
Time is an illusion. Lunchtime doubly so.
it's whensDay...
@rapid hornet i was able to make the pybadge game i'm working on a lot smoother 😺
nice work! what did you improve?
i ended up creating multiple individual sprites rather than splitting up a single tilegrid
I wish I had something to show&tell...but it's kind of hard to show low-level c code....maybe soon I will get my PCBs firmware finished and can show them.
ah
yay digikey!
DigiKey FTW.
Anyone else order late night from Digikey and wonder the next morning what they bought themselves the night before
♥️
♥️
really cool design @sage aspen !
I guess I can show&tell this...It's a breakout board I've made.
Hi all!
nice netlabels!
@sage aspen that'll be epic hugeness!
pinouts
Thanks everyone. It's a really exciting project.
i love the slot machine project
You'll hit the Jackpot with this project
also can confirm the spring loaded lever prints great
I work in a close industry with slots so this is pretty interesting to see
It's important to bounce back after printing a spring-loaded lever.
I got a nice digikey package with a trio of ESP32-S2 for 
Or you'll spiral out of control.
esp32-2 from digikey
oh whoa! the typing is super responsive
(that's one of @brazen grove 's pins)
nice sign!
Nice use of an old ruler. 😉
Feather nest
nice pixel art.
I can show this also...it's my PCB Ruler that's also a digital spirit-level. It runs CircuitPython, just need to write the library for the BMI160 6dof IC it uses.
that's an intense build
Sugru is cool.
moon is so good
Very nice JP!
@haughty quiver 👍
so cool John!
thanks!
Lars will not be impressed...
Excellent design and build, @haughty quiver !
i have to show that robot to some friends who will love it
SAOLA1RBOOT ❤️
it is very nice not having to worry about brick boards
And the protest sign has a lot of potential to be reused for conventions & even cosplay. Any reason you went with off-the-shelf batteries + buck converter instead of a lithium ion battery pack? @haughty quiver
The current draw was too much for the on-board circuit @waxen thistle
I think it surges to something like 2A on startup.
@haughty quiver That makes sense, thanks 🙂
@haughty quiver Ever looked at RC batteries? I know they tend to allow much larger draws
That's a great idea @nova totem
@haughty quiver MAybe USB-C PD could work?
I've used the 7.9V (IIRC?) ones a couple times, they were great.
My friend just got into RC planes and I was looking at his batteries, a lot were rated 25C but not sure the size. I have a 7.2 and 12.4 I think still from when I was into it
@haughty quiver I've gotten a PD sink and soldered it to things, like a TS100 soldering iron. ITs awesome bieng able to use battery packs.
The JumboTron 2.0, powered by CircuitPython.
CircuitTron
BlinkaTron
I love this new chapter of Connections with @low fractal 🙂
make em wear donor logos like a sports car, lol.
Never underestimate the power of The Dark Side zip ties.
super cool @wanton dome !
If you're like me, I would not want to get up to flip the light on/off
domotics is here...
Zip ties, duct tape and WD40. It's what makes the universe work. 😀
@low fractal I have a Model 102!
Pocket universe collectors, unite!
Like the force duct tape has a light side and a dark side and it holds the universe together.
The guy I bought my 102 from was a sports writer for a newspaper. He filed stories from a payphone at the horse racetrack.
Ah, the 80s.
@haughty quiver that has to be a backstory to a movie plot
evening y'all! 👋
oh no!
That's cool, @split gazelle
Excellent animations @split gazelle !
I like the way the snake's head moves @split gazelle . reminds me of a chicken from an atari game 🙂
thanks @lavish patrol @inner spade && @gusty wedge !
adafruit is live at https://www.twitch.tv/adafruit
Adafruit was founded in 2005 by MIT engineer, Limor "Ladyada" Fried. Her goal was to create the best place online for learning electronics and making the best designed products for makers of all ages and skill levels.
Right on the button.
i could've reset but i didn't want to take too much time
The cylons have found us...
@split gazelle Just saw your game 🙂 sweet!
Exactly 33 minutes. The Cylons found us, time to jump the fleet Mr. Gaeta.
@wanton dome thanks!
Jump!
If only cpy had native wifi... oh wait 🙂
We are running out of excuses...
Now we just have to make stuff.
not quite there yet 🙂
uf2 is an amazing step... the dev speed is really fast.
agreed 🙂
Nice work everyone.
Thanks for the show all.
Great show all.
Thanks everyone!
I want to do the station in circuitpython but the M0+WIFI doesn't support it 😦 (at least I think so)
great projects everybody!
Thanks for sharing everyone!
nice show, great tell!
When AAE begins, reset the jump clock @lavish patrol
good job everybody
Question for those here that may know, any preferred site to write up instructions/guides on projects you make? I'd like to put something together about this weather station, just not sure where to put it!
@nova totem I hear adafruit has site for that
Please do @nova totem , amazing project. I'm building a lora repeater with weather station for Isla del Coco, and a weather station for an archaeology conservation project.
@nova totem for weather proof, there are some ready available dielectric paints, but I've been trying this thing and it works excellent. I saw some crazy drone people using it to sink drone and battery on water, take it out and keep flying like nothing.
https://www.amazon.com/gp/product/B0009H1AMG/
@nova totem Instructables, maybe. Or Make:.
(I also use that on a submarine research drone for maint)
@nova totem hackster has a very user friendly GUI for project documentation
i used to write-up all my projects there
Yep. Hackster's good also.
but also adafruit >>>>
@split gazelle 👍
I figured the adafruit guides are all done / approved by adafruit unless there is some part I am missing
Thanks everyone I'll take a look!
WE ARE LIVE! ASK AN ENGINEER! https://youtu.be/MtbIoR2hPpY
Visit the Adafruit shop online - http://www.adafruit.com
LIVE CHAT IS HERE! http://adafru.it/discord
Adafruit on Instagram: https://www.instagram.com/adafruit
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
New tutoria...
Jump clock reset to 0, sir.
Adafruit Industries, Unique & fun DIY electronics and kits : PPE - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoP...
Adafruit always produces beautiful stuff. We love it when it's electronics and when it's not.
Lars looks tired.
I try not to look
I think he had a big lunch.
enemy ducks 😆
Lol.
I mean after seeing the duck song you know they're evil
Not as evil as the goose...
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPixe...
thank you @open girder
@open girder 👍
Congratulations @open girder !
adafruit is live at https://www.twitch.tv/adafruit
Adafruit was founded in 2005 by MIT engineer, Limor "Ladyada" Fried. Her goal was to create the best place online for learning electronics and making the best designed products for makers of all ages and skill levels.
DRADIS contact!
Launch alert Vipers, set condition 1 throughout the fleet.
We're getting red lights right across the board!
[just rejoined coincidentally— life happened and needed to bounce for the first half hour]
That's /your/ story...
that tilemap game learn guide was extremely helpful for blinka jump
Are they actually constructing or just moving dirt around?
Lol.
So that’s where Captain Jack Sparrow got his jar of dirt....
Lol.
Ok. How do I ask questions? I'm on mobile so I can only have this app or YouTube open at once.
❤️ trinamic
@echo sun you can ask in either chat, they will have a section for all the questions near the end (though sometimes answer one during)
(dynamic +1)
These would be good for telescope drive systems.
It's the next step in motor drivers...
The other chat is the YouTube one?
yes
Ok. Can I ask at any time?
https://www.digikey.com/en/product-highlight/t/trinamic/tmc2226-sa-ultra-silent-stepper-motor-driver
Trinamic’s TMC2226-SA is a highly dynamic stepper driver is programmable via UART and is ideal for design upgrades with compatible drivers.
yup though near the end they will answer them all so if you ask it then it won't necessarily get lost in the noise by accident
If on the other hand you LIKE stepper motor noises, https://www.youtube.com/watch?v=JKNieuI6Hmo
Daisy playing on Linuxcnc 2.7.0 - new trajectory planner
Ok. Thank you.
Youtube stream is very spotty today.
twitch too
So is Twitch
Yep. It's all jittery.
Twitch is spotty for me too. I thought it was because I’m on mobile, not my preferred way of watching.
I think it was a me thing as usual.
I was just thinking of switching from youtube to twitch to check, I guess no point
Cylons have infiltrated the comms...
I just went back to ytb
I'm going to post my question now. It's a little general but I'm interested in how it would in how the answers would apply to adafruit's industry.
With your engineering background, what do you think would be more revolutionary as far as technological innovation is concerned? Limitless Free Energy or the ability to change the mass of objects on a large practical scale?
These silent stepper motors are the enemy of FloppyTron, the floppy disk and scanner music project.
All the replaced steppers could be repurposed for music
Circuit Playground Express - Black Girls CODE https://www.adafruit.com/product/2599
As someone who needs custom serial cables....this is amazing.
DE-9 (DB-9) Female Socket to Terminal Spring Block Adapter https://www.adafruit.com/product/4510
DE-9 (DB-9) Male Plug to Terminal Spring Block Adapter https://www.adafruit.com/product/4512
Make your own custom DE-9 cable or DE-9 interface with ease, using this DE-9 Socket to Terminal Spring Block Adapter. You get a nice solid PCB with a DE-9 socket and one line of ...
RJ-45 Ethernet Female Socket to Terminal Spring Block Adapter https://www.adafruit.com/product/4511
Adafruit 9-DOF LSM9DS1 Breakout Board - STEMMA QT / Qwiic https://www.adafruit.com/product/4634
Adafruit Sensirion SHTC3 Temperature & Humidity Sensor - STEMMA QT / Qwiic https://www.adafruit.com/product/4636
are those all-in-one demos that detect the sensor, or does limor switch sketches super fast, or some other sleight of hand?
Is there a way to look at all of the stemma qt board, like adafruit/feather for feathers?
Would be cool to have them in one place.
I think the Ghostbusters have a similar one, a multi-specter sensor. 👻
shop category: https://www.adafruit.com/category/620
Adafruit Industries, Unique & fun DIY electronics and kits : Devices and Sensors - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers ...
E=mc^2
When will the bleio learning guide be out for ble on windows?
Thank you for answering my question.
Q:@open girder how do you program the bootloader and circuitpython on the production line for the nrf52840 feather express?
@digital crescent PR is here: https://github.com/adafruit/Adafruit_Blinka_bleio/pull/12
pull request to fix the README welcome, looks like there's code there for STM32 and nRF5x
Thanks, @open girder
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPixe...
❤️ 'night and take care
thanks for a great set of shows!
G'night all.
With the previous question relating to energy and mass, how would either affect the industry?
does anyone know if there is a good place to get a email template for requesting the day off for voting?
@rapid hornet Thanks. I'll try to get this working.
@fair fulcrum that's a great idea! I don't know of one but maybe @open girder does
@fair fulcrum email me and i'll help ya pt@adafruit.com
there are some templates i think, but i usually help folks over email too, each company is different and sometimes a one-size-fits-all approach does not work well
@rapid hornet Why not just use Host and Client?
great job as always @clear matrix !
Thanks @open girder and good night. 🌘
@noble grove for SPI I like host/peripheral
Great job everybody, these shows make a great mid-week break
Thanks everyone!
it is the Serial Peripheral Interface after all
<3
Thanks Takara!
Thank you all.
@rapid hornet Good point.
Thanks for another awesome evening of shows.
Night all! Thanks for the great chat!
@rapid hornet Well if we're being politically correct, how about for i2c we use pollster and respondent?
@rapid hornet Even more appropriate for 1wire.
@rapid hornet I like HIPO and HOPI
@rapid hornet And I guess it would be PS instead of CS
Places to see, things to go, people to do. L8R Fruits!
@split gazelle Thanks!
?showtimes
MakeCode Live - 3pm ET Tuesdays
3D Hangouts - 11am ET Wednesdays
Show & Tell - 7pm ET Wednesdays
Ask an Engineer - 8pm ET Wednesdays
Desk of Ladyada - Random hacker times
John Park's Workshop - 4pm ET Thursdays
John Park's Show & Tell - 5:30pm ET Thursdays
Deep Dive w/Scott - 5pm ET Fridays
Deep Dive today: https://blog.adafruit.com/2020/06/18/watch-a-deep-dive-w-scott-tannewt-at-3pm-pacific-today-4-5-hours-from-now/
ready for @haughty quiver 's workshop!
Nearly!
Hello all.
welcome to the show.
@haughty quiver level might be a bit low...
Voice audio is very low today.
Thanks for the audio boost there
Much better now!
🎙️
i'd type the discord link, but you'd need the link to see it
Lol.
and what to i see, sprawled on the worktable? could it be.... robot carnage?!?
Lars is trying to hide behind the sign...
you cannot see me
Oh, but I can.
not for long😈
LarsCodeMinute
We need a spinoff series. @haughty quiver and @low fractal going the used stores to rescue cool hardware and tools.
does @low fractal do a show?
Only select appearances on S&T
didn't know that, thanks!
I would also watch his version of 'Connections'
no flicker, looks great!
how long do the batteries last on this?
After I mentioned on S&T last night I looked up RC batteries. Can get a 7.4V that discharges up to 10A to easily support the sign (hope 10A is enough!)
Time to get XT60 connectors on a feather 🙂
soooo, a sponsorship
I mean yeah, you're on the Adafruit Discord watching an Adafruit video hahah
Lol.
just wait til JP starts doing "have you tried nice refreshing Zima? opens can"
Looking very youg there, @haughty quiver
and now for our sponsor, raid shadow legends
that was two months ago :[
?
Brought to you by Brilliant.org
i do hope i see that ad on tv, tbh
A lot's happened in the last two months...
he takes off the bandoleer of shotguns for the livestreams
😁
what was on that one? i don't know what he meant by the one 2 months ago
JP had a lot less facial addons in the Pathfinder Sugru vid
wati what
compared to now
what! i went back, and he did! i did not notice that!
the port is also to load him up with the latest aimbot software
Reminiscent of HAL's eye.
That depth illusion with the lens & LED is so cool
i wouldn't be surprised if someone made a pathfinder account
Lars wouldn't allow it.
adafruit is live at https://www.twitch.tv/adafruit
Adafruit was founded in 2005 by MIT engineer, Limor "Ladyada" Fried. Her goal was to create the best place online for learning electronics and making the best designed products for makers of all ages and skill levels.
but i would love an ally friend
Pathfinder's encouraging remarks might morph when exposed to Lars.
😁
is that VS-Code you are using? If so - can you mention what plugins you are using for development of this?
Pybadger has those colors inside the module. PyPortal's doesn't...
@night vine the code on the screen right now is CircuitPython

doesnt look like vscode @night vine
it's Atom
ah ok thanks Tod
@night vine I use VSCode w/CircuitPython all the time, default Python extension and Kite are 💯
just added to my VSCode, appreciate the tip
:(, carey
click on it! make a vloop
John Park ception
The 3d render looks just like the real thing wow
what 3d printer did you use?
Cool stream JP, thank you
Another great show @haughty quiver 😀
great show!
Thanks @haughty quiver
An excellent project/build/workshop! Thanks @haughty quiver !
thank you all! I was so excited to share Pathfinder :]
Time for a Zima!
LOL, I can't wait to have this refreshing RC Cola and play with LEGO brand building blocks!
are Zimas still available? there's no way...
Thanks @lavish patrol @viral sail @next kayak @inner spade
what for?
great show!
@next kayak
ah.
There's the link if you'd like to come on Show & Tell!
here in spirit again this week 🙂
That's the 7 second delay. 🙂
sneaky youtube
youtube gremlins
wow that's awesome!
nice led strip
Is that available at adafruit? The strip?
That's neat. Very retro-futuristic.
way to upcycke!
I bough some 50W 110V COB big leds from china, but our local shipment company lost them, so I'll have to see.
They have full spectrum for corals, red-blue for growing plants, etc.
neat!
Here's the specific one I got https://www.aliexpress.com/item/32888001194.html
Smarter Shopping, Better Living! Aliexpress.com
im going to have to re do my mood lighting now with that 🙂
but there's many "COB LED STRIP" vendors. Also note this one has UV!
owwwwww Halloween Uv reactive costume with UV cob strip sown in 🙂
This is one of the panels I tried to buy.
https://www.aliexpress.com/item/32994056300.html
Smarter Shopping, Better Living! Aliexpress.com
And with this ones you don't need a power supply because they are 110V direct.
So the heat dissipation is going to cost more than the light itself 🙂
starting my stream in a couple minutes
hi.
wait...its Thursday, right? 🤣
"salúd"
sneezing sounds loud and clear
(se habla español)
also YT
shared.... i could agree it works. it might creep in the thought that the select line isn't necessary. but yeah, i'd say its better than secondary.
yeah yeah. the bus line itself is shared. 👍
it was a bit choppy last night.
i just had a slight buffer on twitch.
Last night streamyard audio was out of synch for me watching them talk when I was in the lobby, Not much but just perceptible
adafruit is live at https://www.twitch.tv/adafruit
Adafruit was founded in 2005 by MIT engineer, Limor "Ladyada" Fried. Her goal was to create the best place online for learning electronics and making the best designed products for makers of all ages and skill levels.
distraction-alert: have you had ligatures on this whole time? just noticed them. not sure i could adjust to them...
sorry. i hesitated to ask in the middle of you talking. 😄
Wooo! I know I'm late, but just joined the stream 🙂
I've forgotten mostly everything I've learned about memory.
I don't even know which version I have in my hand :þ
Don't like those names...
@gusty wedge it's etched on the metal cover
🙂
And there are already kernels in rust, and ways to make rust kernel modules in linux.
would that limit SPI DMA actions to SPI2 only? since we'd be on external only?
would you just lower the GC trigger?
could be my misunderstanding creeping in. doesn't the GC trigger a collect at certain "capacity" limits? so x refs and y capacity...
cross-chat response: very good point Unexpected Maker.
Can't post links in YT...
Jim Mussared gives us the low-down on how the MicroPython GC (Garbage Collector) operates. He discusses the pros and cons of the implementation and considers methods that could potentially improve the GC, particularly around reducing fragmentation.
It's a super-interesting dee...
yeah, networking is kind of important on the ESPs... 😄
5 seconds on snek?
hehe. you're good! being hot while streaming is probably no fun at all... (i assume; never streamed.)
Any thoughts yet about the distant future... whether IDF wifi and networking low-level APIs will be exposed to CircuitPython?
I'll try to formulate more on the question for later. Thanks!
Try out Naan pizza -- really tasty 🙂
(changing channels, monitor mode, low-level stuff like that)
Yummy 🙂
Cooking with CircuitPython lol
how are you on sauces? that's a good time-consuming skill to dive into. i stopped at a very serviceable Hollandaise.
Awesome deep dive! Very interesting to get into the architectural constraints and design trade-offs.
I'm tinkering around with a Maple whole grain mustard.
learning the bases is the important part. a good pan sauce, and a buerre (butter) base...and you'll be set for life. 😄
I've been in and out all day working on the car and helping the family, so I'll have to catch up on JP's streams and your stream later this weekend. I think I caught about 10 minutes total 🙂
thanks all!
thanks for the stream! now i have to go cook; cause i'm starving. this pylint isn't that satisfying. 😄
My next project -- setting up a new Macbook Pro. Need to figure out a machine name lol.
BeardStationOne?
@muted mesa that name is probably already in use
probably.
hahaha
I name after characters from the way of kings series
My last one I named "prudence", after having a previous VM crash & burn without having a viable backup. Mainly because it was Win7 and needed to be purged.
is there a broadcast?
@sharp frost no more broadcasts this week that I know of
@rapid hornet what time is the deep dive
@sterile forge I did it yesterday because today is juneteenth
okay
The plan is to recap ESP32-S2 SPI work Scott did this week and then fix it all up.
Visit the Adafruit shop online - http://www.adafruit.com
LIVE CHAT IS HERE! http://adafru.it/discord
Adafruit on Instagram: https://www.instagram.com/...
missed it will watch it
hi sjr
welcome
Welcome
MakeCode Live - 3pm ET Tuesdays
3D Hangouts - 11am ET Wednesdays
Show & Tell - 7pm ET Wednesdays
Ask an Engineer - 8pm ET Wednesdays
Desk of Ladyada - Random hacker times
John Park's Workshop - 4pm ET Thursdays
John Park's Show & Tell - 5:30pm ET Thursdays
Deep Dive w/Scott - 5pm ET Fridays
Is there a schedule published or a place I can find when Noe will hold Layer-by-Layer streams?
just lurking
@signal solar I think they generally "debut" during ask an engineer on Thursdays but I not 100% sure
voice levels are okay
adafruit is live at https://www.twitch.tv/adafruit
Adafruit was founded in 2005 by MIT engineer, Limor "Ladyada" Fried. Her goal was to create the best place online for learning electronics and making the best designed products for makers of all ages and skill levels.
This session was very informative for those of us with no 2D animation experience. The conversion of 3D movement into 2D space is something I haven't thought about before. Thanks!
mornin' folks ☕️
#3DPrinting Live in 5 mins! #3DHangouts Episode #279 LIVE – Magnets and Holders for Masks
Greetings all.
good morning folks!
According to my Youtube, 3D hangouts starts in 45 mins. 🤔
Correction: started 15 mins ago.
is it live
Try Twitch.
It's live on Youtube now.
nah
👋
good morning folks
Good morning Liz. 🙂
@tired dagger Please chill out
Wut?
#3DPrinting projects on Adafruit Learning System Learn Guide:
https://learn.adafruit.com/filti-face-mask/
With these masks you can face your fears.
Ironically I went to my hardware store yesterday to buy ring magnets to handle the ties on my masks...
Orange County is now mandatory mask, right? Is your area?
I will tell you that this is a great time to learn to sew... you'd both actually enjoy it 🙂
Maybe I should put learning to sew on my bucket list...
I know that a lot of 3D printing depends on what you are using, is there a learn guide for those getting started? Even if it was a list of forums to visit depending on gear.
Drum roll...
adafruit is live at https://www.twitch.tv/adafruit
Adafruit was founded in 2005 by MIT engineer, Limor "Ladyada" Fried. Her goal was to create the best place online for learning electronics and making the best designed products for makers of all ages and skill levels.
Magnetic Ear Savers CAD files on PrusaPrinters
https://www.prusaprinters.org/prints/35309-fabric-face-mask-clips
Closer posts and/or bearings?
Audio died.
Yep
Maker charades
Anyway, it's a safe.
And YouTube.
Audio failed when you started talking about the safe
But it looks like a great print-in-place
And a lovely Limor Pink filament
Maker charades
Lol.
It's fun when they don't look at the chat
@hard hollow @rocky reef no audio
yep
We have no audio on the title either
No charades?
There' it is
audio is back
And it's gone
Audio's gone again.
This seems like it's on the Wirecast side
Gone once you switched from splash screen
Streaming is so much fun.
Aha. We have audio and pictures.
It's better than silence 😉
But no charades.
Yeah, when you think about the complexity of it all, streaming is pretty amazing.
Someone rightly said it is a Limor pink!
(it was Bill, had to scroll back)
?showtimes
MakeCode Live - 3pm ET Tuesdays
3D Hangouts - 11am ET Wednesdays
Show & Tell - 7pm ET Wednesdays
Ask an Engineer - 8pm ET Wednesdays
Desk of Ladyada - Random hacker times
John Park's Workshop - 4pm ET Thursdays
John Park's Show & Tell - 5:30pm ET Thursdays
Deep Dive w/Scott - 5pm ET Fridays
What's the switch to show the times in other timezones?
?showtimes:UTC
Nope.
Thanks, guys. Great show. 🙂
thanks for hanging out folks!
Thanks for the show
Evening peeps.
Good evening everyone!
good evening folks
It's hot where I am.
howfy
Hello everyone
Link to join to show and share your project: https://streamyard.com/cz72rybbji
SHOW and TELL 6/24/2020 #show-and-tell https://youtu.be/ghoaBzgoeoU
To show and share your project at 7pm today, view the chat or in discord https://adafru.it/discord and look for the JOIN link to join.
For best results be on a wired connection and have a headset and mic!
Hello!
seattle "hot" here too
@lavish patrol I think it's -
?showtimes-utc
?showtimes-gmt
MakeCode Live - 20:00 Tuesdays
3D Hangouts - 16:00 Wednesdays
Show & Tell - 00:00 Thursdays
Ask an Engineer - 01:00 Thursdays
Desk of Ladyada - Random hacker times
John Park's Workshop - 21:00 Thursdays
John Park's Show & Tell - 22:30 Thursdays
right
