live-broadcast-chat

[viral sail]

Thanks @open girder and good night. 🌒

[paper schooner]

great show

[waxen thistle]

@open girder Thanks for another evening of awesome shows!

[marsh lark]

Thanks! Have a great night!

[waxen thistle]

Stay safe everyone, and keep making awesome things!

[split gazelle]

thank you for a great set of shows!

[upbeat coral]

Another fantastic and awesome Wednesday. Thank you Adafruit.

[zenith current]

great show!

[paper schooner]

thanks @open girder for being awesome and making life fun

[marsh lark]

Adafruit is well worth supporting. I talk you guys up all the time.

[paper schooner]

I love the @open girder/Digikey "bromance"

[waxen thistle]

Anyone who makes learning + making fun....and easily accessible....is a winner in my book.

[dim knot]

Night all! See ya next week!

[waxen thistle]

I've worked with Boy Scouts, 4H, etc nearly my whole life. It really is true -- you have just 5 minutes of someone's attention. Usually less.

Adafruit's boards like Clue, CPX, CPB, Crickit, etc make electronics easy.

[timber kestrel]

The IR lidar says, they have 1cm accuracy, but they only measured 1cm standard deviations... I may have to put this on the oversized mill and do a proper test on it. 0.001" standard deviations...

[paper schooner]

;showtimes

?showtimes

[arctic abyss]

3D Hangouts - 11am ET Wednesdays
Show & Tell - 7:30pm ET Wednesdays
Ask an Engineer - 8pm ET Wednesdays
Desk of Ladyada - Random hacker times
John Park's Workshop - 4pm ET Thursdays

[paper schooner]

sweeeeeeeeettt 14 minutes

[waxen thistle]

Good afternoon all you wonderful Slappy supporters! 😼

[inner spade]

Slap happy!

[lavish patrol]

Hello all.

I hear there are Bleeps and Bloops in the offing...

[inner spade]

🙁

[lavish patrol]

🤔

[waxen thistle]

It's a little quiet on the western front

[inner spade]

We should lobby for a bleeps and bloops concert 30 min before each show.

[paper schooner]

hahahha ya

[cinder wind]

I'm sure Mr Park could create a music robot to do that

[lavish patrol]

Bleepage and bloopage. I'd vote for that. 🙂

[waxen thistle]

bleeps and bloops are a go!

[paper schooner]

ahhhhhhh

[haughty quiver]

I did create a music robot to do that. It is named @cinder wind

[lavish patrol]

...and we're away.

@cinder wind Bloopbot.

[haughty quiver]

Today's show is just this song on loop for 30 minutes.

[waxen thistle]

Still a better love story than Twil.....err um, nevermind.

[paper schooner]

"Boing..Boing..Boing"

[lavish patrol]

Lol.

[last steppe]

Hey, it's @haughty quiver!

"Mmmm" - John Park, 2020.

[lavish patrol]

Hey, its @last steppe !

[last steppe]

o/ o/

[inner spade]

Good vocal sound level today.

[last steppe]

😂

[waxen thistle]

You'll never be bored with the Jobs Board.

[last steppe]

I wonder if I could find a job on the jobs board to make cutting boards so I'm never bored between waking up and getting on my surf board.

[leaden trail]

Wish YouTube had universal sound level tool. So many videos are super soft, then the next one is LOUD!
At least AdaFruit keeps all their videos in the same range.

[cinder wind]

I'd pay to just have JP play with video feedback for an hour

[last steppe]

@cinder wind the good news is this stream is FREE

[cinder wind]

ahahaha

[last steppe]

this is now a glitch stream

strap in, friends

[lavish patrol]

It's gonna be a bumpy ride...

[solid wyvern]

adafruit is live at https://www.twitch.tv/adafruit

[lavish patrol]

Twitchbot's getting better.

[waxen thistle]

Is anyone getting audio desync?

[last steppe]

ya

[lavish patrol]

@haughty quiver Audio's out of sync again.

[turbid turret]

Still seems out of sync to me

[inner spade]

Audio is ahead of vid on YouTube

[waxen thistle]

Nothing yet. Still desynced.

[wise iris]

still out of sync

[leaden trail]

It's like watching old Japaneese monster movies.

[last steppe]

hi @turbid turret

[inner spade]

<rebooting YouTube on this end>

[turbid turret]

👋

[wise iris]

fixed!

[lavish patrol]

Fixed.

[waxen thistle]

Looks good now

[inner spade]

syncing okay now

[last steppe]

huzzah

[turbid turret]

I'm glad I'm not the only one who has trouble streaming. My stuff is always broken 😂

[lavish patrol]

@turbid turret It's the nature of the beast.

[waxen thistle]

Streaming is a hard job -- all the technical gremlins, being entertaining, and dealing with chat 🙂

[lavish patrol]

Live demo. 😄

[waxen thistle]

@haughty quiver muted 😦

[lavish patrol]

Audio's dead

[waxen thistle]

Audio back!

[paper schooner]

"It's dead Jim"

[lavish patrol]

Lol.

[eager sapphire]

Didn't see this pasted, so:

https://www.adafruit.com/product/4499

[lavish patrol]

Next week's Game of the Week is John Park's Chase the Gremlins out of the Livestream. 😜

[gaunt plume]

👋

https://io.adafruit.com/welcome

lol the great big adafruit io in the sky

[lavish patrol]

Lumens?

[gaunt plume]

CPB's analog light sensor uses a range in lux, iirc

yep. IO Plus is 60 data points per min, per-acct.

[solid wyvern]

adafruit is live at https://www.twitch.tv/adafruit

[inner spade]

Excellent workshop. Very helpful to see how the bridge works.

[lavish patrol]

Thanks, @haughty quiver 😁

[turbid turret]

That was fun & informative. Thanks!

[haughty quiver]

Right on, thanks for coming by!

[gaunt plume]

Thanks JP!

[haughty quiver]

You bet, thanks for your help getting this all running @gaunt plume !

[paper schooner]

cool show!

[gaunt plume]

np jp!

[rocky reef]

#3DPrinting Live in 5mins Episode #266 – Pyloton, Props and Guitars https://www.youtube.com/adafruit/live #3DHangouts

[upbeat coral]

Hmmm...., OK, I see I really need to think about dual gear direct drive for my Ender 3 Pro. Flexible stuff ya know 🙂

[lavish patrol]

Hello all. 🙂

[hard hollow]

howdy!

[lavish patrol]

Why is it telling me "Live in 8 hours"?

[upbeat coral]

Hey y'll

[lean canyon]

good morning

[upbeat coral]

Hot standby on Twitch.

Beeps and woops on twitch

[lavish patrol]

Twitch - that's where I should be. 🤔

[hard hollow]

beep boop

[lavish patrol]

Found it. 🙂

[upbeat coral]

"Excellent"

[rocky reef]

Today's coupon code “cadence” gets you 10% off your order!
#3DPrinting https://www.youtube.com/adafruit/live

[lavish patrol]

Woa! Serious cup.

A walk-through? Or a ride-through...

[rocky reef]

#3DPrinting projects on Adafruit Learning System Learn Guide https://learn.adafruit.com/pyloton

Adafruit Clue
https://www.adafruit.com/product/4500

[solid wyvern]

adafruit is live at https://www.twitch.tv/adafruit

[lean canyon]

twitchbot, late to the party as usual

[lavish patrol]

Lol.

I guess you could say the magnet has a bespoke fitting...

[upbeat coral]

Adabox - the best subscription since Science Fiction Book Club.

[rocky reef]

links to the CPB wearable wristband https://learn.adafruit.com/circuit-playground-wearable

[light stump]

Question for Noé “Layer by Layer” Ruiz: What are some hints to design your sketches in Fusion 360, so that parametric designs don’t break?

Thanks, Noe. Would like to see your examples to get some ideas to improve.

[upbeat coral]

Till t'nite. Great show guys

[rocky reef]

thanks for hanging out folks!

[hard hollow]

thanks folks, cheers!

[lavish patrol]

Well, here we are again, folks.

[split gazelle]

good evening everybody

[lavish patrol]

Hi, @split gazelle

[upbeat coral]

Hey y'll

[trim mountain]

Anxiously awaiting the link

[inner spade]

Hello!

[upbeat coral]

Hot standby on twitch

[lavish patrol]

Hi, @inner spade

[inner spade]

Hello @lavish patrol !

[lavish patrol]

One minute to go...

You can cut the tension with a knife...

[ivory kiln]

Lol, nail biting

[open girder]

Link to join to show and share your project! https://streamyard.com/ji6dat23k5

[clear matrix]

Good evening, everyone!

[lavish patrol]

There's that duck again...

[urban flower]

Evening

[lavish patrol]

Hi, @clear matrix

[leaden trail]

Happy S&T day!

[sage aspen]

Good evening

[open girder]

WE ARE LIVE! SHOW AND TELL! https://youtu.be/3Ju24qf_RBc

[upbeat coral]

60% alcohol supposed to kill the virus, I'm workin from the inside outward tonight. 🙂

[urban flower]

I live for solder burns

[lavish patrol]

Dan the Man...

[split gazelle]

woo 5!

[upbeat coral]

Of course "Dan" announces 5.0

[inner spade]

Five dot oh dot oh!

[upbeat coral]

Dan - o get it.

[strange mantle]

go get it:
https://circuitpython.org/downloads

[upbeat coral]

Printing one now

[lavish patrol]

@split gazelle 🎸

Bunnies in space?

[split gazelle]

great work @sage aspen

[lavish patrol]

Cool stuff, @sage aspen 🙂

[sage aspen]

Thanks

[muted mesa]

👋 evening everyone!

[sage aspen]

Looks really good @clear matrix

[split gazelle]

i second that, looks awesome

[lavish patrol]

@clear matrix 👍

[clear matrix]

Thanks, all!

[muted mesa]

mute and off button strike again!

such a dastardly duo...

[lavish patrol]

Live demo 😁

[urban flower]

Ohh that spinning leaf is cool

[split gazelle]

whoa that's cool

[open girder]

10% off all items in stock code is widerange expires 3/4/2020 @ 11:59pm ET #askanengineer http://www.adafruit.com

[lavish patrol]

Cool project

[urban flower]

That must be FPV?

[lethal lagoon]

hi yall!

[sage aspen]

Hi @lethal lagoon

[lethal lagoon]

hi @sage aspen !

[lavish patrol]

Hi, @lethal lagoon 🙂

[split gazelle]

great footage @trim mountain

[lethal lagoon]

ooh cool drone project @trim mountain !

hi @lavish patrol !

[muted mesa]

way cool!

[lavish patrol]

@trim mountain That's great!

[inner spade]

Great first flight, test pilot @trim mountain !

[normal plover]

I grew up in Indy not far from him (56th and Allisonville) brings back memories

[lavish patrol]

@split gazelle 👣 🙂

[lethal lagoon]

neato @split gazelle ! I would love to build a step counter into a cosplay costume

see how many steps im taking at the con haha

[lavish patrol]

@lethal lagoon So you know how many steps you took before you overheat? 😉

[split gazelle]

@lethal lagoon thanks! yeah! it's built into the Clue's accelerometer library now- really easy to use

[trim mountain]

Ella flying a drone
https://www.facebook.com/ATMakersOrg/videos/180780333344549/

[lethal lagoon]

@split gazelle so cool! also loved watching your daily guitaring, inspiring me to get back into tinkering with music too!

[upbeat coral]

See yens in a few. Great makers doing great makes.

[trim mountain]

Longer video from me and Bill
https://www.facebook.com/ATMakersOrg/videos/2463087614006457/

[split gazelle]

@lethal lagoon that's awesome! thanks, it was both scary and awesome to share that journey

[odd stream]

Cool projects tonight!

[split gazelle]

great projects everyone

[lethal lagoon]

@split gazelle thank you for sharing it 🙂 I have a guitar i bought a while ago and sadly never learned to play it properly, but ONE DAY I WILL 😄

it's a cool hello kitty fender hehe

[split gazelle]

ohh nice i've seen that one around i think. get the power chord shape down and then you'll be noodling in no time 😺

[lavish patrol]

I've never learned to play a musical instrument. Maybe one day... 🤔

[lethal lagoon]

YES noodling is my ultimate goal there 😎

[lavish patrol]

Noodling?

[lethal lagoon]

already have like 5 great band names though

[lavish patrol]

Sophy and the Banshees?

[lethal lagoon]

Super Glue and the Greeblies!

[split gazelle]

coming up with band names is one of my favorite hobbies

[lavish patrol]

Lol.

[inner spade]

I play a few instruments but never played a noodle (yet).

[urban flower]

The guitar reminded me of a present I got as a younger person back in the late 70's , a electronic guitar.

It actually had touchpads and frets

[split gazelle]

ohh nice

[lethal lagoon]

@urban flower whoa that sounds cool

[open girder]

WE ARE LIVE! ASK AN ENGINEER! https://youtu.be/dcgxo-4_kQA

[urban flower]

You actually strummed a touchpad

[open girder]

10% off all items in stock code is widerange expires 3/4/2020 @ 11:59pm ET #askanengineer http://www.adafruit.com

[dim knot]

https://www.adafruit.com/free

BBC micro:bit Go Bundle https://www.adafruit.com/product/3362

[lavish patrol]

Psychic paper 👍

[ivory kiln]

Lol,. I wonder if you can get the button in red? Because sometimes you just need a BIG RED button. 🙂 ❤️ Doctor Who

[paper schooner]

so true

[solid wyvern]

adafruit is live at https://www.twitch.tv/adafruit

[lavish patrol]

25 minutes in.

[muted mesa]

thanks @arctic abyss! 😄

[lavish patrol]

Lol.

[paper schooner]

congrats adafruit!

[vale ridge]

we did it!

[lavish patrol]

👍

[dim knot]

https://2020.oshwa.org/

https://learn.adafruit.com/

[paper schooner]

a lefty!

[upbeat coral]

Lefties, the only ones in their right mind

[paper schooner]

they say lefty's are more creative

I wish I was a lefty 😦

[upbeat coral]

We have to be in a right handed world. 🙂

[paper schooner]

hhaha true

[ivory kiln]

@open girder Q:Would you guys make the Pic&Place machine cam a live web watchable video feed?

[lavish patrol]

That'd be cool.

[delicate fractal]

Did anyone see the Fnords?

[dim knot]

Serpente - Tiny CircuitPython Prototyping Board - USB C Plug https://www.adafruit.com/product/4514

Serpente - Tiny CircuitPython Prototyping Board - USB C Socket https://www.adafruit.com/product/4513

Adafruit Triple-axis Magnetometer - LIS2MDL - STEMMA QT / Qwiic https://www.adafruit.com/product/4488

Adafruit VL6180X Time of Flight Distance Ranging Sensor (VL6180) - STEMMA QT https://www.adafruit.com/product/3316

Adafruit ICM-20649 Wide Range ±30g ±4000dps 6-DoF IMU - STEMMA QT / Qwiic https://www.adafruit.com/product/4464

[paper schooner]

mmmmmmm fastchip

[lavish patrol]

Teeny screen.

[sage aspen]

I like the joystick cap from that last video

[paper schooner]

you two every take vacation?

[delicate fractal]

Do you have any preferences among the 3D printers you own?

[echo canopy]

Question: any plans to make a Qwiic / Stemma MOSFET /. Transistor board. ? Alternative to a relay /. Just. Power Ground Signal and. IN/OUT?

[ivory kiln]

@open girder For the pick & Place cam, I meant of the outside view.

Expected it to be silent, just like the various traffic or what not cams

[urban flower]

does the building next door to the empty lot still have doors or windows?

[echo canopy]

Great. show everyone!!!

[paper schooner]

one win per lifetime?

[open girder]

CALL IN TO WIN: 646-248-7822

[ivory kiln]

Q: Have you considered making a variable power power board? Ie: power off of a LiPo that can be adjusted to supply 3.3V 5V & 6V for instance?

[paper schooner]

doh!

[ivory kiln]

Sorry for missing Q & A time

[paper schooner]

congrats Bob!

[lavish patrol]

Congrats Bob from Boise 👍

[paper schooner]

gr8 show

[lethal lagoon]

grats Bob!

[split gazelle]

thanks for a great set of shows

[lethal lagoon]

time to go shopping! 😄

[lavish patrol]

Another great show @open girder

[lethal lagoon]

thanks for a another awesome set of shows

[upbeat coral]

Thank you for giving us your time.

[gaunt jackal]

thanks!

[muted mesa]

thanks everyone! have a great day/evening/night!

[lavish patrol]

K. Must dash. Night all.

[paper schooner]

too cute

[lethal lagoon]

gnight all!

[sage aspen]

goodnight

[dim knot]

Night all! See ya next week!

[open girder]

10% off all items in stock code is widerange expires 3/4/2020 @ 11:59pm ET #askanengineer http://www.adafruit.com

[waxen thistle]

Good evening all you wonderful makers.....wait where is everyone?

[I had other things going on, hope y'all had an excellent Wednesday of shows ]

[paper schooner]

lol @waxen thistle I had that same issue on the 3d printing show.. was an hour late because of work.. doh..

[haughty quiver]

testing testing!

[upbeat coral]

Hello my name is Due wester and I'm an alc....

Oops wrong meeting 🙂

Test complete JP

[haughty quiver]

👍

[waxen thistle]

Good afternoon all you wonderful folks!

[inner spade]

Good afternoon to you, too!

[upbeat coral]

Hey y'll

[cinder wind]

Is this the room with the blooping and the bleeping?

[inner spade]

All's good in the workshop hood.

[upbeat coral]

Occasionally

[lavish patrol]

Morning/afternoon/evening all.

[upbeat coral]

Greetins @lavish patrol

[lavish patrol]

There will be bleeping.

There will be blooping.

[upbeat coral]

that the bot misses

[lavish patrol]

Lol. It get there in the end.

Usually the end. 🙂

[inner spade]

Makin' omelettes today? 🥚

[lavish patrol]

We'll have to egg him on.

[inner spade]

You crack me up.

[lavish patrol]

I was making a yolk.

[inner spade]

Will we be using a feather eggs-press?

[waxen thistle]

Bleeps and bloops are a go!

[upbeat coral]

Boing poing boing poing on twitch

[inner spade]

Super sound!

[lavish patrol]

Bleepage and bloopage.

[eager sapphire]

👋

[inner spade]

voice sound level is great!

[upbeat coral]

Egg Drop - McGyver last week?

[inner spade]

A vegan egg-drop?

[eager sapphire]

Just had a little deja vu there

[lavish patrol]

I noticed that.

[eager sapphire]

Ok not just me. A glitch in the matrix.

[lavish patrol]

Those gremlins again.

Lol.

[upbeat coral]

My Google devices talk to me all the time at the wierdest times

[waxen thistle]

Mobster Siri..... hey you...youse talkin' to me? Youse talkin' to me?!

[lavish patrol]

Lol.

[waxen thistle]

yolk it up

[lavish patrol]

I hope the stream doesn't get scrambled...

Audio's out of sync again.

[upbeat coral]

Started with the video of the game.

[waxen thistle]

@haughty quiver Out of sync audio 🎙️

[lavish patrol]

Humpty Dumpty?

[lean canyon]

nah, this guy seems to go back together much easier

[upbeat coral]

Where does it say Humpty Dumpty was an egg?

[waxen thistle]

He was actually from Tanagra. When the walls fell.

[lavish patrol]

From Wikipedia: "He is typically portrayed as an anthropomorphic egg, though he is not explicitly described as such."

So he could be a sausage...

Or a badger.

[solid wyvern]

adafruit is live at https://www.twitch.tv/adafruit

[lavish patrol]

Twitchbot, why do you even bother? 😁

[lean canyon]

likes to remind people that he's still around

[lavish patrol]

Lol

[eager sapphire]

Synch seems to have slipped further

[upbeat coral]

Get a real egg and check

[lavish patrol]

Try aluminum foil. That what SpaceX uses in the legs of the boosters.

@upbeat coral Lol. I read that as "Get a real egg and chick" 🤔

[upbeat coral]

Durability of a Clue is in question now.

I feel like I'm watching You Tube and listening to Twitch

[inner spade]

"Calibrating through violence."

[waxen thistle]

@haughty quiver There's been an audio desync since the video 🎙️

[lavish patrol]

It's been a veritable souffle tonight. 🙂

[upbeat coral]

Thank you for sharing

[waxen thistle]

Sorry, didn't mean to chase you away.

[lavish patrol]

Lol.

[inner spade]

Thanks @haughty quiver !

[lavish patrol]

Thanks @haughty quiver 🙂

[haughty quiver]

LOL, I pulled it from the case, removed the battery, and now it works again?!

[waxen thistle]

🤷

You've got the touch. You've got the power....yeaaaaaah!

[upbeat coral]

Step - Stop - Master Clear - Bootstrap

[haughty quiver]

It's alive!

[turbid turret]

🎉

[upbeat coral]

YAY!

[turbid turret]

@haughty quiver off topic, but do you have any guides posted on your live streaming setup?

[upbeat coral]

It's those Green Clues

[haughty quiver]

Hi @turbid turret ! I have written up something about this setup before, let me find it and I can send it to you and post it on my GitHub or blog.

[waxen thistle]

@haughty quiver Bleeps and bloops are still live....[on twitch]

Now they're down 🙂

[haughty quiver]

thank's @waxen thistle I let that run a bit by accident :]

[waxen thistle]

👍

[inner cosmos]

hey
can anyone tell me how to send an image from raspberry pi to adafruit by using image feed

[earnest cipher]

try #help-with-projects

@inner cosmos

[open girder]

We are LIVE! IoT Design Week with Microchip’s “Wizard of Make” Bob Martin and Adafruit … #iotDesignWeek2020 @MicrochipMakes @open girder #iot https://youtu.be/fu37Uf-CXNE

[waxen thistle]

Good morning all you wonderful sentient 3D printers masquerading as people!

[rocky reef]

#3DPrinting Live Episode #267 – IOT Projects and MIDI Guitar https://www.youtube.com/adafruit/live #3DHangouts

[hard hollow]

howdy folks

[waxen thistle]

Bleeps and bloops are live!

[eager sapphire]

Howdy Ruiz Bros!

[solid wyvern]

adafruit is live at https://www.twitch.tv/adafruit

[eager sapphire]

"Counting the Ultraviolets" <- nice, heh

Volatile Organic Compounds, I think

[buoyant sable]

total volatile orcanic hydrocarbons

[rocky reef]

Learn Guides
https://learn.adafruit.com/welcome-to-adafruit-io/overview
https://learn.adafruit.com/adafruit-io-air-quality-monitor/overview

[waxen thistle]

Weather Plotter -- a fun microelectronics + cloud ☁️ project......or the name of a superhero TV show's villain-of-the-week.

[rocky reef]

guide for a servo controlled mail box https://learn.adafruit.com/gmailbox

3d prints for boards: FeatherWing Doubler / Triplerhttps://www.thingiverse.com/thing:3975162

#3DPrinting Project Tips & Work-In-Process / MX Guitar! https://www.youtube.com/adafruit/live

Time for COMMUNITY MAKES on #3DHangouts https://www.youtube.com/adafruit/live

https://github.com/adafruit/Adafruit_Learning_System_Guides

3D Parts Library on GitHub
https://github.com/adafruit/Adafruit_CAD_Parts

Community Makes: Star Trek Comm
https://www.thingiverse.com/make:772734 star trek comm #3DHangouts

[waxen thistle]

@hard hollow @rocky reef Thanks again for another wonderful show! Good luck moving!

[rocky reef]

thanks @waxen thistle !

[eager sapphire]

Indeed, another fine show, thanks Bros R.

[rocky reef]

thanks for hanging out folks!

[upbeat coral]

Dang, I'm sorry I missed todays show. See yens t'nite

[hasty chasm]

@rocky reef when you have a spare moment, I have a PR outstanding on the Adafruit CAD Parts repo 🙂 more parts mostly modeled & PRs incoming if they're useful 🙂 thanks for maintaining this excellent resource.

[cyan holly]

hello from Europe, I'm enjoying that the difference is one hour less than normal until we switch to Daylight Savings too 🙂

[upbeat coral]

Hello from across the big pond @cyan holly

[waxen thistle]

Good evening all you wonderful folks!

[upbeat coral]

And to you @waxen thistle

[lethal lagoon]

hi yall!

[upbeat coral]

Hey ya @lethal lagoon

[cyan holly]

@lethal lagoon helen says hello 🙂

[lethal lagoon]

hi helen!

[open girder]

LINK TO JOIN https://streamyard.com/h8rjk9877s

[waxen thistle]

Hey @lethal lagoon !

[open girder]

WE ARE LIVE! SHOW AND TELL! https://youtu.be/iFtLRo6kqZ8

[waxen thistle]

Howdy @upbeat coral !

[upbeat coral]

Noise on Twitch 🙂

[gaunt plume]

Helo!

[rapid hornet]

hi all!

[waxen thistle]

Aloha @gaunt plume !

[sage aspen]

Hello

[gaunt plume]

hi @rapid hornet @sage aspen

[upbeat coral]

Hello @sage aspen

[sage aspen]

Hi @gaunt plume

[haughty quiver]

hi!

[split gazelle]

good evening everyone

[sage aspen]

Hi @upbeat coral

[upbeat coral]

Hey ya @split gazelle

[waxen thistle]

Evening @split gazelle !

[gaunt plume]

🚙

[waxen thistle]

@sage aspen That's an awesome rover! It bounces off things even better than I do 🙂

[solid wyvern]

adafruit is live at https://www.twitch.tv/adafruit

[split gazelle]

ohh fun!

[lethal lagoon]

super cool @sage aspen !

[sage aspen]

Thanks @lethal lagoon

[haughty quiver]

that bot is really cute!

[sage aspen]

Thanks @waxen thistle

Thanks @haughty quiver

[waxen thistle]

Thanks for making things easier for us humans to read 🙂

[split gazelle]

wired!

[upbeat coral]

Wires - what a concept.

[wanton dome]

always add more wires

[odd stream]

Wires are best

[gaunt plume]

https://learn.adafruit.com/ethernet-for-circuitpython

[haughty quiver]

that logo!

[gaunt plume]

🙂 Bruce does a great job!

[lime falcon]

Yay! Anne is showing what she did with my bag line!

[waxen thistle]

"Plug it in and it pretty much just works."

💤

[lime falcon]

Card edge connectors are a pain to design boards around, but super easy to use in a final project.

[upbeat coral]

How's that cabin fever doin ya there @rapid hornet

[wanton dome]

@upbeat coral just another day at the office for us remote folks 😉

[lime falcon]

Longer battery life is great for wearables too.

[split gazelle]

i'm hyped for this sleep mode

[gaunt plume]

same.

[waxen thistle]

@lime falcon It's so easy for a beginner to get started -- and when they need something more compact, powerful....they will choose something better suited to their specific need.

And thusly, our work here is done....*spins cape around and flies away

[upbeat coral]

Having spent almost three years punching wholes in the ocean, I'm diggin on the cabin fever sufferers 😎

[waxen thistle]

If sleep mode doesn't work correctly, would it be called insomnia?

[spring heath]

How to be on Show and Tell guide https://learn.adafruit.com/show-and-tell

[waxen thistle]

I'm all for seeing a stream this weekend @rapid hornet 🙂

So purple!

[rapid hornet]

great @waxen thistle !

[spring heath]

[gaunt plume]

poor egg..

[waxen thistle]

JP. Professional omelette chef.

[lime falcon]

LOVE the virtual egg drop! I've done real egg drops in summer camp for several years in a row. The kids would have a lot of fun with this twist.

[gaunt jackal]

you should integrate the temperature sensor to cook the egg

[wanton dome]

note: the CLUE does not fry well

[spring heath]

No eggs were harmed for science

[cinder wind]

This egg drop tester would be good to test sensitive electronics packaging. I sent my laptop in a while back and was not convinced the box was enough

[haughty quiver]

Ooh, neat idea @cinder wind

[waxen thistle]

You've got mail! 📫

[split gazelle]

ohhh cool i didn't realize you could do that

[rapid hornet]

@compact seal streamyard link: https://streamyard.com/h8rjk9877s

[compact seal]

Ahhh

[muted mesa]

👋 everyone!

[rapid hornet]

I talked too long...

[compact seal]

Awesome. Maybe next week 😄

[hasty chasm]

neat idea @cinder wind, could be like a high tech version of one of these https://www.thepackaginggroup.com/shockwatch-tiltwatch-plus

[rapid hornet]

so many folks!

[wanton dome]

@split gazelle yup, IO has lots of handy UI widgets and a super easy UI for putting them together

[compact seal]

is it the same link every week?

[rapid hornet]

no, I don't believe so

always on streamyard though

[compact seal]

got it

[wanton dome]

and we always post it here!

[waxen thistle]

And always posted here before S&T

[rapid hornet]

feel free to ping me if you don't see it and things are going

[waxen thistle]

haha, beat me to it @wanton dome 🙂

[split gazelle]

like buttah

that'll be so cool @lethal lagoon

[rapid hornet]

nice job @lethal lagoon !

neopixels aren't easy to solder

[spring heath]

Great work @lethal lagoon

[lime falcon]

Yay for illuminated wearables! Amazing @lethal lagoon

[wanton dome]

That ball looks like Egregore from Cryx

[lethal lagoon]

thanks all! i'm so stoked that it's actually working!

[low fractal]

@lethal lagoon Where'd you get the larger globe? I need something like that for a cosplay project. 🙂

[hasty chasm]

yeah super cool! i was actually just thinking about how to assemble PCBs into polyhedra this week, would be super interested to see what you come up with @lethal lagoon. curious if there are any suitable COTS mounting brackets at various angles or something

[lethal lagoon]

@low fractal from 1000bulbs.com! i looked all over and they had the best price i could find

[low fractal]

Brilliant! Thank you.

[split gazelle]

great projects everyone!

[gaunt jackal]

great work everyone!

[viral sail]

Great work everyone

[muted mesa]

thanks for sharing everyone!!!

[waxen thistle]

Thanks for sharing everyone 🙂

[compact seal]

Whoop whoop

[spring heath]

Thanks for tuning in aklkl

all

[compact seal]

Thanks for your service Adafruit!

[lethal lagoon]

@hasty chasm i havent solved the physical connecting yet, but i was thinking of 3D printing a jig and assembling around it, since i am planning to model the whole thing in Fusion anyway and go from there to Eagle

[lime falcon]

Reminds me of a 3-d version of those hexagon light tiles

[light stump]

Now and Pedro, your makin’ cupboard looks bare!

[dim knot]

Here's that cool graphing app: https://grafana.com/

[hasty chasm]

yeah cool @lethal lagoon - are you thinking the solder connections would also be the main mechanical support or maybe 3d printing corner brackets or something?

@lethal lagoon i saw this on twitter this week which is why i got to thinking about it 🙂 seems they are just using solder https://twitter.com/ElectroPoint4u/status/1236175440525406209

Electro Point (@ElectroPoint4u)

Just take a moment any enjoy this beautiful #PCB_Pyramid https://t.co/lcx1D31xvU

▶ Play video

Twitter

[waxen thistle]

Grafana is wicked good, I have seen it used many times from hobby projects to enterprise monitoring. And it can ingest data from an insane variety of sources.

[cyan holly]

re: the board I showed, it is based on the Getting to Blinky tutorial videos for learning kicad http://contextualelectronics.com/GTB

[open girder]

WE ARE LIVE! ASK AN ENGINEER! https://youtu.be/B8NTcZsA96U

[cyan holly]

and for the Open Hardware Summit please visit http://2020.oshwa.org/

[lethal lagoon]

@hasty chasm at first i thought the solder connections would be an cool way to stick the whole thing together, but I'm planning to carry it all day at a convention (whenever we start doing those again) so i think i need to make it a bit more robust

[cyan holly]

everything will be on there

[lethal lagoon]

3d printed brackets would be cool! i love that idea, but will probably reinforce with some kind of glue too

[cyan holly]

this was the version i made https://blog.oshpark.com/2020/03/06/goodies-for-the-open-hardware-summit/

[waxen thistle]

@cyan holly Other than the sparkfun badge, is there anything else in the bag that's personalized?

[solemn spear]

@lethal lagoon how about threading it through something solid like PCB connectors with strain relief holes? I've been doing that a lot for hard wearing wearables and it worked like a dream

i get breakages a lot without it

you could do it with the bantam (which I'm assuming you're using for the DIY pcb routing?)

[lethal lagoon]

yes! for sure, strain relief holes are a great idea

yep! it's great at drilling holes!

[solemn spear]

even for neck or arm mounted electronics it's been great

[hasty chasm]

do you have an example of that anywhere @solemn spear ? having trouble picturing. PCB connectors = like pin headers?

[solemn spear]

loving your recent builds

@hasty chasm like the third pic here https://www.instagram.com/p/B41BsZPnLOj/

[hasty chasm]

ahh i see, neat, thanks!

[lethal lagoon]

@solemn spear thanks Helen! And to you, always! Love that embroidery, working or not 😄

[solemn spear]

I was soooooo grumpy at myself for not checking the connectors before sewing the whole thing. amateur hour!!

[lethal lagoon]

that's the nice thing about embroidering a circuit, it's still awesome as straight embroidery!

[solemn spear]

and the event I've been designing it for is almost certainly going to cancel toooooooo

whomp whomp

[muted mesa]

we're like always here. and we're definitely always happy for company! 🤣

[waxen thistle]

The more the merrier 🙂

[open girder]

10% off all items in stock code is inittogether expires 3/11/2020 @ 11:59pm ET #askanengineer http://www.adafruit.com

[fallow fractal]

Beep Beep!!

[muted mesa]

ouchies! 🥚

[odd stream]

@haughty quiver Couldn't you just use (9 - index) and the 0->9 for loop?

[waxen thistle]

⏱️ ☕ @haughty quiver's MakeCode Minute was 2min 24sec of using slightly caffeinated Javascript code blocks! ☕ ⏱️

That's a tiny board!

[odd stream]

@waxen thistle The PCBs look mosterously thick with the tiny boards.

[cyan holly]

Glad ​glad to see you got the wrist badge 🙂

I did a version with blinka logo on the backplate on one side, and QR code on the other side

⌚

for more on the wrist badge https://hackaday.io/project/168483-open-hardware-summit-2020-badge

to watch the stream and join the chat of the virtual summit: http://2020.oshwa.org/

[odd stream]

@cyan holly That's a cool board.

[cyan holly]

thanks it is was a great team effort

https://circuitpython.org/board/ohs2020_badge/

[haughty quiver]

@odd stream well not if I didn't think of that I can't! :)

[upbeat coral]

I already have subscriptions to both 😦

[solid wyvern]

adafruit is live at https://www.twitch.tv/adafruit

[waxen thistle]

They appreciate your support @upbeat coral 🙂

[upbeat coral]

HOWEVER! Maybe now I can get them both for near the price of one in my wifes name:-)

[dim knot]

https://learn.adafruit.com/

[viral sail]

Magnify and enhance.

[dim knot]

https://www.adabox.com/

DIN Rail Mount Bracket for Raspberry Pi / BeagleBone / Arduino https://www.adafruit.com/product/4557

DIN Rail Terminal Block Adapter to Grand Central or Arduino Mega https://www.adafruit.com/product/4555

DIN Rail Terminal Block Adapter to Metro or Arduino Uno https://www.adafruit.com/product/4556

Flirc Aluminum Case for Raspberry Pi 4 https://www.adafruit.com/product/4553

Adafruit LPS25 Pressure Sensor - STEMMA QT / Qwiic - LPS25HB https://www.adafruit.com/product/4530

[slow spire]

Hi, everyone!

[dim knot]

Squishy Circuits Standard Kit https://www.adafruit.com/product/4550

Adafruit LSM6DSOX + LIS3MDL - Precision 9 DoF IMU - STEMMA QT / Qwiic https://www.adafruit.com/product/4517

[fallow fractal]

How does the new 9-dof compare with the NXP 9-dof??

[glad mortar]

How are you deciding wether you add a crystal to a SAMD based product? Some have it like the Feather M0 some not like the Itsy Bitsy M0

[merry gulch]

?? Is there a GUI designer included with the node red environment? How do you create a GUI panel that talks to node red?

[glad mortar]

Thanks! So without a usb connection it could be less stable without an external crystal?

[viral sail]

Thanks @open girder and good night! 🌖

[waxen thistle]

Thanks for another awesome evening of shows @open girder!

[upbeat coral]

Thank you for your time.

[merry gulch]

Thank you

[rapid hornet]

@glad mortar I added stored calibration to CPX because I noticed tones changing pitch on and off USB

[muted mesa]

thanks @open girder and all for hanging out!

[kindred stirrup]

Always fun

[dim knot]

Night all! See ya next week!

[rapid hornet]

• clock calibration

[glad mortar]

@glad mortar I added stored calibration to CPX because I noticed tones changing pitch on and off USB
@rapid hornet very intersting

[rapid hornet]

on samd21

the samd51's internal oscillator is factory calibrated

[glad mortar]

Most of my more critical applications are connected to a usb host, I guess thats why I haven't noticed it before

Ah nice thats good to know!

[rapid hornet]

it varies with each mcu too. I saw something like 46mhz off usb

on one chip

[waxen thistle]

Good afternoon all you wonderful folks!

[lavish patrol]

Good afternoon @waxen thistle, and all.

The bleeps and bloops are an hour early this week...

Or am I an hour early? 🤔

[inner spade]

The bleeoops have yet to arrive on-scene.

[haughty quiver]

Uh oh, I've already had my fair share of DST confusion!

[inner spade]

And there they are!

[waxen thistle]

4pm eastern is typically when he comes on, but the whole daylight savings time throws a monkey wrench into things. I'm sorry, but I'm not bright enough to manually do that math in my head --- google is such a helper with timezones.

[lavish patrol]

Bleepage and bloopage detected.

[eager sapphire]

Hearing something like a kalimba from the Forbidden Planet...nice

[waxen thistle]

nothing yet on Twitch

[inner spade]

Nice subtle and relaxing sound levels today:

[lavish patrol]

It's 8:00pm where I am.

[waxen thistle]

still nothing on Twitch 😦

Live on Youtube

[lavish patrol]

@waxen thistle You'll have to wait for about 25 minutes for Twitch. 😉

It's a bit jittery, @haughty quiver

[waxen thistle]

Agreed, the stream is slightly caffeinated.

[inner spade]

Voice sound level is okay, perhaps a bit low

[waxen thistle]

Twitch is live!

Woah, there's like a 6-7 second lag between twitch and youtube.

[lavish patrol]

How long before twitchbot tells us. 😁

[inner spade]

Audio sync is okay.

Level better, but seems to clip at -2db or so.

[lavish patrol]

Stream seems less twitchy on Twitch.

[upbeat coral]

Sorry late. Was watiching the US Stockmarket and having a breakdown.

[waxen thistle]

Buckaroo reminds me of Buckazoids, the currency of choice in the vintage Sierra game "Space Quest"

[lavish patrol]

Deep breaths, @upbeat coral 😉

[waxen thistle]

We're all in this together. It'll get worse before it gets better, but it will get better.

[upbeat coral]

Thank you @lavish patrol Innn and one twooo threeee and ouuuuttt

[waxen thistle]

Think of it like this -- now's the time to buy cheap.

[lavish patrol]

@waxen thistle Understood. 😁

[waxen thistle]

[note: I'm not a financial professional. take that advice with the appropriate grain or kilo of salt.]

[lavish patrol]

Lol.

🧂

[upbeat coral]

Cam in a housing to determine two to four positions.

Earl Grey?

[waxen thistle]

Tea. Earl Grey. Hot.

[upbeat coral]

Use your new little military button and a slide cam to interact with the CPX

[waxen thistle]

Is JP stuttering during the video?

or is it just me?

[upbeat coral]

Not just you and the lag is getting worse

[lavish patrol]

Stuttering for me too. Just the video, not the audio.

[upbeat coral]

Happens when he shows video

[waxen thistle]

You can get get away with less than ideal video, not with audio though.

[lavish patrol]

And audio's out of sync.

[waxen thistle]

Yep, agreement here -- the audio is desynced

about 1-2 seconds

[lavish patrol]

Yep.

[upbeat coral]

I so want to be left alone in that shop for just 5 minutes.

[solid wyvern]

adafruit is live at https://www.twitch.tv/adafruit

[lavish patrol]

24 minutes, Twitchbot. 😜

[cinder wind]

ah so it detects touches, so we can use it as a face touching warning

[lavish patrol]

Good thinking, @cinder wind 🤔

[waxen thistle]

@haughty quiver There's a 1-2 second audio delay since the Makecode community video.

[upbeat coral]

nope

[lavish patrol]

Nope. Still out of sync.

[vale ridge]

Hey John! Great project! Is there a way to determine the water level in the container via the Clue/Buckaroo? I wouldn't want the motor to be on when there's no water and the plant is dry.

ah perfect, I didn't realize that pin 2 was also available. Thank you very much!

[upbeat coral]

Thank YOU JP for spending some time with us.

[inner spade]

Thanks @haughty quiver!

[lavish patrol]

Hello. I'm your deputy Sherriff. I see you haven't been watering you plants, so I'm going to ask you to come with me. 😉

[vale ridge]

Thanks John!

[upbeat coral]

It's Due West er

[waxen thistle]

Thanks @haughty quiver for another awesome show 🙂

[lavish patrol]

Thanks, @haughty quiver

[eager sapphire]

Thanks John "Space Kalimba" Park!

[vale ridge]

I had that water level issue come up in my own implementation of a self-watering plant system via Arduino. Although my solution was rather bad (sonar sensor pinging a piece of paper on the top of the water). I'm curious that even using pin 2 from the CLUE, would that need to be connected to the side of a container holding water at the "danger zone" level? I'm not even sure what kind of reading one would be looking for 🤔

[haughty quiver]

you would probably do the opposite -- have a couple of nails in the water with tips near the bottom. when the sensor senses high resistance, warn that water is low/empty.

[vale ridge]

ah ok, that makes sense

[little siren]

There are also a few Adafruit products that can be used. One is a binary detector you mount through the side of the container and it tells you whether there is water at that level. Also a few different lengths of depth measuring tapes, the resistance varies depending how much is below the water level. In my automated plant design I was going to use the tapes so I could also detect a pending overflow, since the input bucket was fed through a valve from the house water line.

[rapid hornet]

Open Hardware Summit 2020 is virtual and live! If you love Adafruit you'll love OHS. All the details are here including the YouTube stream: https://2020.oshwa.org/

https://www.youtube.com/watch?v=Ifin8nPZpGA&feature=youtu.be

https://discord.gg/38C57Uf

[waxen thistle]

It's open to all, free of charge -- you don't need to register. Just hop on the youtube & discord link and you're there....virtually!

[waxen thistle]

[And ok, maybe I'm biased because this is a community I dearly love and enjoy being part of....but I'm honestly blown away at how slick it's going digitally. It's not the same as being there in person, but this is how you do a virtual conference. I can totally see smaller/proto-conferences use this format to get started if funds are tight or it's impossible to meet in person.]

[rapid hornet]

ya, I'm very happy with how it is going. literally woke up and starting watching the keynote on my phone

the recordings will be way better too

[waxen thistle]

That's exactly what I was thinking -- watching it with an ipad on the nightstand, chat & video on splitscreen. And all I can think is....we're in the future. No getting up at the crack of dawn after flying across timezones, groggly stumbling across the city to the site. [in this case it's local for me, but it's not for so many folks]

After the opening, I moved over to the home office seamlessly, and I'm able to get things done while following along. Lunch is in the oven, laundry is going.... While we're on break I'm catching the Microchip livestream on low-power sensor networks.

This is so ideal 🙂

[rapid hornet]

oooh, link me please

I'm working on low power now

[waxen thistle]

https://www.youtube.com/watch?v=3DQM0ZxsyEg

It's about halfway done, but they leave the VODs up.

@rapid hornet https://www.cotorelay.com/products/magnetic-sensors-switches/ --- collateral from the youtube chat

[waxen thistle]

And we're back from lunch, if anyone is interested in joining 🙂

[waxen thistle]

@rapid hornet If you do choose to stream tomorrow, you'll be doing it on "Pi Day" 🥧

[rapid hornet]

@waxen thistle I think I will but I'm playing it by ear. Will definitely let you know if I do

[pearl shoal]

Trying to make a custom NRF52 Sense build - don't see it in ports/nrf52/boards...

Am I missing something?

Well po*p, @rapid hornet - I reset (even wiped and re-cloned) and don't see it

Can I just copy it over from master?

[rapid hornet]

what does git log show?

[pearl shoal]

bill@MSI:~/lowpower/circuitpython$ git log
commit 9fb635b60dd681331a6e8a7c1f38d30cd1cd5f83 (HEAD -> master, origin/master, origin/HEAD)
Author: Scott Shawcroft [e-mail]
Date: Tue Sep 3 09:15:23 2019 -0700

Remove dependency on test build to see if we can rerun individual jobs then.

commit de7a603c065892ac1f72c167437ea7874472c7cd
Merge: a480b7048 35c7646ee
Author: Dan Halbert [e-mail]
Date: Tue Sep 3 09:33:14 2019 -0400

Merge pull request #2105 from arturo182/GD25Q32C

Add GD25Q32C flash device definition

commit 35c7646ee4112d6654f982818bc40304e34ea9d4
Author: Dan Halbert [e-mail]
Date: Tue Sep 3 08:52:21 2019 -0400

Make trivial change to redo GitHub Actions build.

The GitHub Actions build for this PR is failing for reasons that make no sense. Make a tiny commit change to see if it will refresh things and work again.

commit a480b70488d7f1968b0169e857e383bf94b002f1
Merge: febfc7e4e 4e19158e0
Author: Scott Shawcroft [e-mail]
Date: Mon Sep 2 21:24:48 2019 -0700

[rapid hornet]

4fba4eb1331d28892a633517bc729811d0807e2a should be the latest commit

what commands did you run?

[pearl shoal]

I rm -rf and re did the clone

[rapid hornet]

did you check out the lower_power branch?

https://github.com/tannewt/circuitpython/tree/lower_power

[pearl shoal]

running now

errors in hw/mcu/nxp can be ignored?

Building now - thank you

[rapid hornet]

what do you mean by errors?

you may need to update submodules. my master branch is old. I never use it

[pearl shoal]

So, this is weird

I got it running

And now after I restart, I go straight to the boot mode

PFFFT.... When I opened the device manager, CIRCUITPY showed up

I got a REPL to show up - not sure what's going on - huge delays on everything

I'm going to switch it back to 5.0.0 and see if it behaves better

Yeah, I'm thinking that build is not perfect

Have you tried it w/an AirLift on it?

This will wait until tomorrow

Thanks, @rapid hornet

[rapid hornet]

ya, no promises on it @pearl shoal. I think I did just fix some tick stuff

[pearl shoal]

I found a problem on my side as well (missed a pin on the Airlift soldering! not sure if it's used

Will test tomorrow at the workshop

[rapid hornet]

will need a bunch of testing. I think my approach is to get everything basically going so when I test things like pulse in I can just swap in the different mcus

[rapid hornet]

Hey all, I plan on streaming hacking on TinyLogicFriend and Sigrok around 1pm today (~3.5 hours or so from now). Will either be on my Twitch or Adafruit's

@waxen thistle ☝️

[waxen thistle]

🥧

[rapid hornet]

okie, gonna get it all going

anyone see twitch and youtube?

[waxen thistle]

Adafruit or your channel?

[rapid hornet]

adafruit

[waxen thistle]

Nothing on twitch yet

there we go

Yellow bird on a blue-ish background 🐦

[rapid hornet]

yup

still not seeing youtube

[waxen thistle]

me neither

[rapid hornet]

restream says "sending data"

[fickle umbra]

You have a Very Clicky mouse, @rapid hornet

[waxen thistle]

Loud and clear @rapid hornet

Visuals look good

https://twitch.tv/adafruit

[split gazelle]

hey everybody! i'll be lurking

[waxen thistle]

@split gazelle 👋

Sit back, grab a coffee/tea, and enjoy 🙂

[fickle umbra]

The boards in the saleaes are v pretty too

[waxen thistle]

Here's the 8-port version of Scott's logic analyzer: https://www.adafruit.com/product/2512

[sorry, don't mean to be distracting 😕 ]

[gaunt plume]

👋

[waxen thistle]

https://github.com/tannewt/tinylogicfriend

https://sigrok.org/

[solid wyvern]

adafruit is live at https://www.twitch.tv/adafruit

[fickle umbra]

gives TwitchBot a botsnack.

Hey, he did his job. He deserves it.

[proper trench]

🐍

[shell mason]

[proper trench]

ok im gonna start with a samd51 itsybitsy m4

[shell mason]

cool

[proper trench]

yahh! time to rip up - i always start with known-working hardware

im gonna convert it to usb c first

[fickle umbra]

We have faith in you, @rapid hornet

[proper trench]

we can build it ... we have the technology

[waxen thistle]

And the factory.

[shell mason]

Factory to build-in

[fickle umbra]

.. and now I'm picturing Bionic Blinka....

[proper trench]

ok addin' USB C from other known-working designs..

don't forget those 5.1k's!

ok all ripped!

@rapid hornet hey which pins should i use from porta?

[waxen thistle]

Where can we find this datasheet? I see at Microchip there are several versions of the SAMD51, and I want to pull the right one to follow along....

[proper trench]

these are the taken ones 😄

ill remove the QSPI flash... they're right in the center!

[cinder wind]

all the pins! who needs flash and swd

[rapid hornet]

http://ww1.microchip.com/downloads/en/DeviceDoc/60001507E.pdf

[waxen thistle]

Copy that, thanks 🙂

[proper trench]

ooh

ok i think the first 16 pins of PA are unique

ill check!

[fickle umbra]

I /think/ ctrl+scrollwheel will resize?

[rapid hornet]

https://sigrok.org/gitweb/?p=sigrok-util.git;a=blob;f=cross-compile/macosx/sigrok-native-macosx;h=7f6380e7c6ceb3f00a183ba3efdd0d02d7372b28;hb=HEAD

[fickle umbra]

I don't need it, you're in the big screen. Was just sayin

[gaunt plume]

@fickle umbra alt+t brings twitch into "theater mode", larger window. could be useful

[shell mason]

here is for windows https://sigrok.org/wiki/Windows

[waxen thistle]

And this is an off-topic recommendation, but for twitch, the chrome extension "FrankerFaceZ" give a very excellent amount of controls over how you can watch streams.

[fickle umbra]

TC0 is where arduino gets millis() right?

[proper trench]

yeah! that or systick

@rapid hornet do we need 32khz xtal

or are we using usb sync

yay removing 😄

oh 😦

ok!

addin' a 74xx245 in between outside world and samd51

this lets us use 5V logic, and protects the '51 🙂

74LCX245 in particualr

[rapid hornet]

https://learn.adafruit.com/debugging-the-samd21-with-gdb

[proper trench]

ok got the buffers layed out....

jepler wanted alternating grounds

to keep noise down

yah im not so sure how important it is at these speeds :/

ill try 2x5s - power is nice, could provide 5V and 3.3V 🙂

[fickle umbra]

Poor Scott with that "What did I get myself into" look. 🤗

[proper trench]

whee!

yay stuck indoors 😄

that was a good idea 😄

[shell mason]

Indoors but not indoor

as online

[proper trench]

ok for the 2x5 im gonna recycle the bus pirate pinout!

[waxen thistle]

I call it "under house arrest". You can leave, but only for the right, approved reasons.

[fickle umbra]

FYI PDF view is running off the bottom/right edges

[proper trench]

hmm oh yeah

i guess ill do gnd, 3v3

and then 8 pin bus?

👍

[shell mason]

inBoarding and outBoarding

[proper trench]

yah - these shifters are so cheap and small

can have both 🙂

cuter 🙂

[opal wolf]

Eternally spinning beach ball...

[waxen thistle]

When in doubt, turn it off and back on again.

[proper trench]

k routed one port

[shell mason]

soon there is 2 ports routed

[proper trench]

s00n

[cinder wind]

try echoing pinstate to toggled LED inside EIC_interrupt on metro to verify

[brazen grove]

echoing in an interrupt doesn't sound a like a good idea?

[cinder wind]

sorry, not echo to serial, but send pin read out to LED

[proper trench]

routyroute

[cinder wind]

better hurry Scott, looks like ladayada's gonna have the board done and shipped in a few hours

[brazen grove]

rortating the sockets 90° would make it nicely symmetric

[proper trench]

lol its not a race!

we're a team!

[fickle umbra]

I mean, keeping up with LadyAda does not sound like a bad mission in life

[shell mason]

when @rapid hornet do things ladyada to board design

[proper trench]

💰

[rapid hornet]

https://github.com/bnahill/PyCortexMDebug

[waxen thistle]

I'm really enjoying this sort of deep dive.

It's absolutely out of my depth, but being a fly-on-the-wall, I'm picking up little things that'll benefit me later.

[proper trench]

yah! the best part of steaming is the debugging - im learning lots too

[shell mason]

well we get to see board inthe making also

[brazen grove]

There was a network error. Please try again. (Error #2000)

[waxen thistle]

I got that too -- Twitch is under decent load, refresh the stream.

[proper trench]

twitch seems ok to me

[shell mason]

its go to me

[waxen thistle]

I refreshed and it worked like a charm 🙂

[shell mason]

well ok

[brazen grove]

how exactly does a charm work?

[opal wolf]

Charmingly.....

[cinder wind]

Maybe stick in a signal generator (or just PWM) to scan instead of I2C ?

[brazen grove]

frequency is a keyword-only argument

[cinder wind]

yay data!

[proper trench]

congrats - you debugged and succeeded live - not easy 😄

[opal wolf]

https://tenor.com/view/data-star-trek-commander-star-trek-gif-5361018

[waxen thistle]

🎉

I don't have any questions as I've got more learning to do on my part, but I wanted to say thank you for the stream-of-consciousness and detailed thought processes.

[rapid hornet]

https://github.com/tannewt/tinylogicfriend

[fickle umbra]

Hey, seeing how someone else thinks about something is v educational.

[cinder wind]

This was great. I learned a lot about SAMD internals. Thank you!

[rapid hornet]

https://github.com/tannewt/libsigrok/tree/master/src/hardware/tiny-logic-friend-la

[proper trench]

just finished routing - a perfect finish 😄

[shell mason]

good good

[waxen thistle]

Thanks again @rapid hornet This was an excellent afternoon, and we appreciate taking your time to do this.

[fickle umbra]

Talk about timing @proper trench

[proper trench]

scott and i are on the same CLK 🙂

[shell mason]

like clockwork

[proper trench]

great stream !!

[rapid hornet]

thanks @proper trench !

[proper trench]

gdb podcast 😄

[gaunt plume]

Thanks for the stream, scott!

[rapid hornet]

thanks all for watching!

[fickle umbra]

❤️

[proper trench]

@rapid hornet i put a dotstar and a activity LED

anything else u want?

[opal wolf]

Cool new stuff. Thanks for showing it to us.

[rapid hornet]

not that I can think of. I'm bottle necked on the software side

[proper trench]

totes

hardware is faster to design

but will take 2 weeks to get PCBs 😄

[rapid hornet]

true true

[shell mason]

that bottleneck isfixed by then

Right?

[cinder wind]

neopixel per input har har har

[open girder]

The biggest worldwide online Show and Tell begins Wednesday March 18th, 2020 at 7pm ET
https://youtu.be/VmVkX_7PkLs
https://discord.gg/adafruit

[open girder]

going live in a few.. https://youtu.be/exG-Zbq7N10

We are live! Adafruit will be shipping until 11am ET Weds March 18th, 2020 – and then we are closing our physical operations (COVID-19 – NYC)

https://youtu.be/exG-Zbq7N10

[split gazelle]

💜

[lethal lagoon]

hello!

❤️

[hasty chasm]

Adafruit is really setting a great example of how companies can act compassionately in a crisis. Proud to know that the money I've spent there over the years is supporting people who care about their employees and their community ❤️ ❤️ keep up the great work & good luck staying busy, healthy & sane during the shutdown!

[lethal lagoon]

stay safe @open girder peeps! sending all our love and good vibes!

[split gazelle]

Take care! You’re setting a great example! I’ll definitely be stopping by tomorrow night

[lethal lagoon]

looking forward to hanging out tomorrow for sure

[waxen thistle]

Just watched the vod (was on the phone with my folks, helping them get essentials to weather the coming weeks).

How you're handling this is a blueprint for others. 💜 This is why I'm happy to support Adafruit, because y'all do the right & best thing -- especially when you don't have to.

[clever imp]

Super excited for show-n-tell tomorrow!

[halcyon linden]

@open girder I just watched your update video and you are a top notch company and I'm pleased that I can support by buying your products! Great company with great decisions. 👏

[remote scroll]

How does one participate in the live show and tell? Considering bringing my raspberry pi cyberdeck to the table. https://www.cyberdeck.cafe/post/project-code-named-virtuscope

[fallow fractal]

@remote scroll You could contact a moderator an hour before the show.

I think you need Google Hangouts as your software, so get that setup in advance, if that's what they're using. I just saw something about YouTube, so get that going as well.

The blog (see below) says "stop by Discord to get the link to join LIVE!"

https://blog.adafruit.com/category/show-and-tell/

[remote scroll]

yep and that's why i'm here

[fallow fractal]

Well say it started at 7:30 pm New York time .. get here at say 6 p.m. and start asking.

Someone who's been on before will know more (I haven't so I am just guessing).

[remote scroll]

Thanks will do.

[hard hollow]

howdy folks we'll be doing the 3D hangout live show an hour early today 🙂 https://blog.adafruit.com/?p=428997

[shell mason]

ok

[rocky reef]

Today's coupon code “finalhour” gets you 10% off your order!
#3DPrinting https://www.youtube.com/adafruit/live

[shell mason]

ready set go

all systems good, refreshed printers

[solid wyvern]

adafruit is live at https://www.twitch.tv/adafruit

[robust horizon]

hi!

[shell mason]

hey jeff

[hard hollow]

morin' folks!

[halcyon linden]

Hello

[past nova]

Hey

[robust horizon]

gonk droid says hi

a friend 3d printed this!!

[past nova]

Wow that's awesome @robust horizon

[shell mason]

Gong say hi to adafruit right

[waxen thistle]

Good morning all you wonderful folks!

[split gazelle]

good morning!

[fallow fractal]

morin' folks!
@hard hollow sounds really great 🙂

[waxen thistle]

👋 Happy sunshiny day to ya

[rocky reef]

Learn Guide launches later today on: https://learn.adafruit.com/mx-midi-guitar/

[waxen thistle]

Nice job Liz 🎸

[shell mason]

lets party started

right guys

🎸

[split gazelle]

thanks @waxen thistle !

i ended up 3D printing my keycaps because i had some bad luck with some i ordered

[shell mason]

nice have you shared the model?

[split gazelle]

it's actually @hard hollow & @rocky reef 's, i'll link it

[rocky reef]

MX MIDI Guitar code available now on: https://github.com/adafruit/Adafruit_Learning_System_Guides/tree/master/MX_MIDI_Guitar #3DHangouts

[split gazelle]

https://www.thingiverse.com/thing:1989243 @shell mason

[rocky reef]

MX MIDI Guitar stls available now on: https://www.thingiverse.com/thing:4228412

[shell mason]

good

[rocky reef]

3D Parts Library on GitHub
https://github.com/adafruit/Adafruit_CAD_Parts #3DHangouts https://www.youtube.com/adafruit/live

CircuitPython Downloads: https://circuitpython.org/
https://www.youtube.com/adafruit/live

[shell mason]

[rocky reef]

Silicone Cover Stranded-Core Ribbon Cable - 10 Wire 1 Meter Long - 28AWG Black https://www.adafruit.com/product/3890

Adafruit Perma-Proto Half-sized Breadboard PCB - Single https://www.adafruit.com/product/1609

[shell mason]

flexlible is good

[rocky reef]

Adafruit Mini Skinny NeoPixel Digital RGB LED Strip - 144 LED/m - 1m BLACK https://www.adafruit.com/product/2970

[shell mason]

nice

[rocky reef]

last 5 mins of shipping! Today's coupon code “finalhour” gets you 10% off your order!
#3DPrinting https://www.youtube.com/adafruit/live

[shell mason]

so last minute wow

so that is why you are hourearlier?

[upbeat coral]

Hey y'll. Sucks I didn't read my alerts and only just now found out this is an hour early.

Saw last nights alert about shipping but didn't realize this might be on early as a result.

Awesome guitar

[split gazelle]

my demo video: https://diode.zone/videos/watch/e3e7a26b-0e78-4fb6-87eb-88dc5a131d30

[upbeat coral]

A fallback job - good idea 🙂

[waxen thistle]

Nice job @hard hollow @rocky reef & @split gazelle !

[split gazelle]

thanks @waxen thistle !

pupper!

[upbeat coral]

Believe me, you don't wanna see mu workspace. Unless you want to see a bad example of organization.

[split gazelle]

have a good one!

[hard hollow]

thanks folks!

[rocky reef]

thanks for hanging out folks!

[waxen thistle]

@upbeat coral We all can sympathize with that feeling.

[rocky reef]

see you all later tonight@

[upbeat coral]

Take care see yens t'nite

[waxen thistle]

You'll find that the bunch of us on here don't care how disorganized your space is....we're not judgmental. We want to see the cool stuff you're working on 🙂

[fallow fractal]

+Hello Everyone, thanks for being able to be here... currently in the middle of building a maker desk up trying get something all set up 🙂 got some old laptop cams, some bendy goose neck bits, some tools and a notion of setting up obs with a virtual cam plugin for discord so as to be caring and a sharing... hope every one in keeping and being well 🙂

[spare burrow]

A new person appears! Hello everyone!

[upbeat coral]

I warned you. AND Welcome @spare burrow .

[velvet mulch]

Hello all. I'm interested in sharing for tonight's show & tell. I have OBS studio for video. Can anyone offer advice on how to: 1. sign-up, 2. participate technically (what software do we use? Google hangouts, skype?)

[spare burrow]

Thank you @upbeat coral.

[upbeat coral]

Hello @velvet mulch . Kinda in the same boat. I'm usually just a lurker here.

[spare burrow]

Good question @velvet mulch. The last time I was on Show and Tell, it was on Saturday.

[velvet mulch]

I'll ask the same question on the general channel

[brazen grove]

there is this link, and it just says to come here...

https://learn.adafruit.com/show-and-tell/joining-show-and-tell

[clever imp]

Teaser picture for some project nostalgia to share on show and tell!

[open girder]

at 7pm, we will post the link here to join, stay tuned

[spare burrow]

👍

[fallow fractal]

woo woo

[pearl shoal]

Very ready for this S&T 🙂

[spring heath]

Yes, it should be fun

[lethal lagoon]

hi yall!!! excited to see everyone's faces and projects! ❤️

[glad mortar]

only got old stuff to show but excited to see so many people 🙂

[spring heath]

sounds good @glad mortar

[vale galleon]

Hey! This looks awesome. We just joined in, hope we get a chance to show everyone what we've been working on at inspectAR 🙂

[clear matrix]

The link will be posted at 7pm. If you can't get in, be patient, people will drop throughout the stream to make more room.

[pearl shoal]

Here's a preview of my story for tonight 🙂 -- Completely non-AT, but I like it 🙂

[split gazelle]

evening folks

[spring heath]

Hi Liz, welcome

[waxen thistle]

Long time no see @split gazelle

[median plume]

Hey guys! I'd love to show you guys all a LIVE demo of inspectAR, an augmented reality tool for PCB assembly, rework, AND remote collaboration https://www.inspectar.com/

[fallow fractal]

Hola

[split gazelle]

hey @spring heath !

i know right @waxen thistle ?

[fallow fractal]

This should be fun

I am surrounded by finished and unfinished projects waiting for the fun to start 🙂

[cyan holly]

MEGA show n tell

[fallow fractal]

@split gazelle AND @cyan holly ? Cool 🙂

[cyan holly]

i love that it is 12:00am in berlin instead of 1:30am

thanks phase shift from US Daylight to CET

[fallow fractal]

I am normally in the office at 4pm PT so it's impossible for me to join these to share

[gaunt plume]

Hello

Hi Jay

[fallow fractal]

hey brent!

[lethal lagoon]

hi @split gazelle !

[clever imp]

hi @lethal lagoon !

[lethal lagoon]

omg hi @clever imp !

[cyan holly]

yeah, time diff is so werid. I work for Oregon company from Berlin. It's wonderful 8 hours instad of 9 hours for a few weeks 🙂

[spare burrow]

So who normally does the countdown?

[brazen grove]

what countdown? for the meteorite?

[fallow fractal]

they'll post the link here, just wait if you can't get in

there's a limit to the lobby so we'll all cycle through

[clear matrix]

Good evening, everyone!

[gaunt plume]

hi kattni

[split gazelle]

hey @lethal lagoon !

[fallow fractal]

hey hey @clear matrix

[lavish patrol]

Hi, @clear matrix

Hello, all.

[pearl shoal]

Hi All!

[spring heath]

Hi all, the link will be posted at 7pm. If you can't get in, be patient, people will drop throughout the stream to make more room.

[split gazelle]

panicked for a moment that i was having audio routing issues but the guitar was in strum mode 😅