#💻tech-support
1 messages · Page 67 of 1
for me it hasnt been the loading times but the stutters and low fps
it is for DX11, DX12 will compile cache/create PSO,
however the framedrop of DX11 probably is higher than DX12 (besides being "faster")
Personally I haven't noticed that much of a framedrop on DX11
Just freezes...
regarding pso, how long does it take and can i just load into a map, afk for a few mins and then play it without lag?
you need to look at assets
yep does using windows 11 got to do with freeze?
It will PSO cache on the loading screen, so afking in spawn wouldn't do anything. It will resume caching (but should not have too noticeable of effects) once you start clearing the rest of the map and get the finer details.
should not, i use w11 and some friends use 10, just fine
Take a picture of your in-game graphic settings (both tabs)
Gotcha
Windows 10 freezing just the same
oh ok i guess its something from the game anyways have a nice day all im about to hop out and i hope next week void fixes the issues
So would you recommend dx11 or dx12, im just trying to run the game at a high stable fps without stutters and without having to clear the maps for them to be playable
DX12 would be the best option for you, since DX11 does not have pso caching and it will stutter
alright thanks
Recommended settings for 1440p 120fps, ryzen 5 4500, rtx 3060, 32gb ram, ssd? Before this update i got 120fps stable
Keep in mind DLSS is bugged atm, you have it on performance, but it will still run the same as "quality."
Try capping your FPS to 80 to 100 and see if that helps, I wonder if your PC is working harder than it has to while loading. You could also try lowering AA and PP to low
Did that not get fixed in the patch today?
Would not know exactly what settings to best recommend, you shoulkd be able to run on high I would say, but you may have to play with FSR
No, it's on known issues atm

Has anyone experienced a game crashing after you try to use the mirror gun? Just not to repeat the question about the already solved problem..
Recommended settings for 1440p 120fps, ryzen 5 4500, rtx 3060, 32gb ram, ssd? Before this update i got 120fps stable
I haven't heard about that specifically, I know that it has some issues, but crashing wasn't one I heard
Should I keep it in #1050535723087958156 or better put it into the #1265712033295372473?
Bug reports, either channel
Ok, thanks, Casual Sinner!
It does not, I can hear fans getting slower. About DLSS it feels like it actually works, cus after putting it on performance I gain noticeable amount of fps. About to check what you recommended
According to the devs it will still be using quality mode, not that it won't work, it just isn't gonna change off quality engine wise
how much now if ou play with FSR performance+resolution scale to 60%?
105 but the game doesnt look great
make it quality/100%
and cap your framerate to be less noticeable by any stuttering
So nothing changed
thanks
stable lower fps > higher fps higher framedrops, my opinion.
Agreed
I can't launch game with mods, worked before the update so idk what to do. Can anybody help?
Still not loading into maps? or long loading times?
Nah I load into maps, but just like I said it freezes in the mission
oops mb, cheers
Have to say initial testing after the patch everything maxed out with quality DLSS on a 3070, definitely seeing major improvements not great but in the right direction. It’s not yet as good as before expansion but it’s a lot better.
"Higher is better, but more consistent is best"
"Thanks Steve"
#GN memes

I'll try to force dlss to performance mode after it finishes patching
I have no idea if there is a problem on my side, or the game. When I open doors on hospital map, the game lags and the room behind the door decides to just start loading hence the lag I assume, I have no idea what to do. Map with dozens of doors on one floor and each door that gets opened lags the crap out of it.
is there a fix to menu settings not saving?
Which ones ?
Have you at any point set anything in %LOCALAPPDATA%\ReadyOrNot\Saved\Config as read-only ?
Try taking a video to show specific areas/the map
It's on all maps, so should I make on all of them? lmao
No, just one map to see when it is lagging specifically
I might have to do another writeup lol
DLSS currently it is only working at quality, my suggestion is to use FSR until there
That did the trick thanks a lot
FSR and TSR working great
thanks but I'd rather use TSR
but for people with lower end cpu's on UE5 I highly recommend not to automatically drop everything straight down to Low. It can have the opposite affect and put more load on your cpu. Its better to use more aggressive Upscale than to go straight down to low everything.
what's the reason for long loading time?
how to fix the error corrupt data found, please verify your installation? I tried everything and still its not working for me.
you have a left over mod, delete all mods manually
i have no mods installed, and this only happened once i updated my game to the latest version.
Remove your mods #❓modding-faq-archive
i'm TSR team as well 😛 just go for it and i will let you known when DLSS is back
I turned so many people to TSR now
I'm team 1080p on RX6900XT, F upscalers entirely !
so no TSR? 😦
Gimme r.ScreenPercentage 200 or go home
engine.ini no AA 8k res FTW
HotFix did not solve my problem, after playing for about 20 minutes or maybe earlier, my fps drops by about half. The load of the video card is one hundred percent. Very often this happens when the shadows are on epic settings (then at least in 5 minutes the fps can drop by 2 times) I noticed that the use of vram is very large and unjustified (to take up 8 gigs of video memory at low settings). It looks like some kind of leak, but I can't tell the exact problem.
actually dlss quality seems to work well enough for now but yeah that foliage in dlc mansion map looks atrocious if I'm not using dlss
Does this channel allow links from streamable, I want to show the lag problem I am experiencing but don't want to get flagged by automod or something.
Hi, I need help regarding with launching the game with dx11 or 12
When I try to launch the game with one of those options it doesn’t work
It says corrupt data found
Launch the game in safe mode, or delete all mods you have previously installed.
Safe mode works and I have no mods
I deleted the game and did a fresh install before the home invasion DLC came out
Do you have a mods.io account and are you logged in with that account in RoN? If so then it would immediatelly reinstall all the mods that are subscribed to per the account.
The game is unplayable since latest patch
I'm still not able to play the game properly. It used to run at 100+ fps at 4k and now it's at 40
Well, then the only thing you could try is to verify the game files.
I did multiple times
Everything is good
Could it be because I didn’t update my drivers
Well, this error is with the game, and that the game files are corrupt, while you can try and update your drivers I don't see how that problem connects to your drivers version.
On the hospital map I seem to run into an issue where opening or peeking doors simply lags the crap out of the whole game. I have no idea if that is a known issue or if it is on my side, however it did start after the conversion from UE 4 to UE5. https://streamable.com/sbak3z
Before the patch came, my saves were still there, but with the update, all my items are gone. Does anyone know the solution?
You guys were right, even though I had no mods installed from mod.io, there are still some left over files in the game file
Thank you guys for the help👍🙏
which CPU/GPU/video Driver? it is running on SSD or HD?
after todays recent patch, the update refuses to install and nothing is allowed to download on steam because of it
i have tried uninstalling, which didnt work, then i tried to clear the download cache, which didnt work due to the fact that it wont stop installing
ive put in a steam support ticket, which hasnt been responded to yet, and i kinda need this resolved asap because its completely handicapping my steam, and i cant install any updates
any ideas on what i can do to fix this would be huge, thanks in advance
All my progress with missions and clothing has been reset since earlier today, anyone know how to help?
Same happened to me, just wait a bit
ive been waiting ever since the patch released, it is quite literally not installing
it downloaded the patch, than it patched it into the game, all 50 gb and all, and just stopped at the install phase
Intel I5-6400/1060 (6GB)/newest driver (560.70). I have the game installed on an HDD.
instance of it not allowing any other installs
ty mate, i will report that to the team
oops just realized it attached two files
My friend is experiencing an issue with the graphics he said that apparently the quality went down after the patch his graphics are maxed out. Has anyone else noticed this? I personally don't see any issues
Thank you very much.
No issue for me
bro whats dis?
verify your files
you have mods still installed or left over mod files probably
i cant enter the game tho
verify files on steam
In files
Anybody else just getting entirely random crashes?
Consistently every mission they happen for me
yes but not as much as last time
You gotta go to ron files go in to binares content modio or iomods something like that and uninstall the folders there
update, just said update failed
before i try installing again, should i do anything else?
search up a tuttorial on YT
My friend just uninstalled the game
and reinstalled it
No problems at all
Im his friend
im taking the gamble on just trying to install the update, i think its just steam being absolutely god awful
Try changing your download region to the one closest to you.
It took me around 10 min and after that it downloaded properly
And if it is set to that already, just try again.
live in new jersey, is in new york
Do you have the game installed on an SSD or HDD ?
SSD
Open the download settings and check where the download region is set to.
The patch was already downloaded, so why ? Check the screenshot again.
SATA or NVME ? Which model ?
not trying to be rude but ive already tried all those things :)
Well, don't know then.
all good, this is quite literally my last line because steam support is awful per usual
^
Does anyone know why I can't use DLSS Frame Generation even though I have an RTX GPU?
cant find it
You don't have RTX4000
Search up a tuttorial
That sucks, but well, thanks.
Tell that to Nvidia really, since they bottlenecked DLSS-G to Optical Flow cores in Ada (i.e. it runs in hardware).
RTX3000 don't have those.
Well, thanks for the help.
i dont remember but ive managed to get the update to pause so im just gonna update everything else and then try to mess with RoN
ive managed to get it to clear the download cache so i pray to god that this is all i need to get this to work
Once the devs figure out a way to fix FSR3 bugs with its Frame Gen, they will likely enable it in Ready Or Not, so potentially there's could be that option.
Or, a mod that swaps DLSS-G to FSR3 FG exist on NexusMods if you really want frame gen that bad.
and im pretty sure its an NVME
Which brings that "which model" question.
SteamPipe patching system doesn't really favour cheap DRAM-less drives due to the reliance on copy operation, so it's too much disk I/O to do for cheaper drives and they get stuck like that.
I have problems installing the update
Have a very bad stutter every few seconds after the latest patch? 4080 + 7800x3d
no i cant install the update can you get to the generall vc because its kinda complicated
can someone help?
what are the problems
Create a thread in #1265712033295372473 and post screenshots if needed be, or write here as suggested above.
can i explain in general voice chat because i can stream
its easier to explain cause its rather complicated
itts fixed for now
literally unplayable
Take a picture of your in-game graphics (both pages and all settings)
my game keeps saying a have low memory when infact i dont
Feel free to tell us the fix so others can potentially use it 🫡
i have a 3060 12 gb
What's the entire message, where do you see it and what's your PC config ?
does this mean you waited 10 minutes when it said "Installing" or is a re-download required?
it says that im out of memory and i need to close some apps but i have none open that takes alot of it
and my pc is spec are rtx 3060 intel 13700k
what about ram?
weird

How can i manually install maps? Previously they were in the Paks dir but now it throws currupted data error. When i create mods directory in: Ready Or Not\ReadyOrNot\Content\Paks and put even single map inside, game play intro and then loads over 24GB to ram and nothing happens...
Not aware of any map being updated to be compatible with current game tbh.

Anyone else stuck on installing for the patch?
Give it a time
Or move it to faster drive.
NVME lel and it's been installing at 0% for awhile
DRAM-less ?
Doubtable, my game is on M2 and I still waited for quite a while
My FPS is still absolute shit 😦
At least you can play
Yeah updates for any other game fucking fly lol. But this is the 2nd update from RoN that does this now.
At first I really liked this patch. It seemed that things ran smoother. I was getting a higher frame rate than before. I got into a gunfight, though, and the fps tanked and eventually it crashed... That never happened to me before. The fps tanking during a gunfight or the crashing
M.2 is a socket, not a speed standard. Again, is your SSD DRAM-less ?
Just to demonstrate how MUCH the patching process is reliant on disk performance:
https://i.imgur.com/0YQrk5A.png
Cheaper drives without DRAM cache tend to suffer and freeze.
btw the fps didn't tank when I was shooting, only when npcs shot anything. Weird
Welcome to the club 😏
ah damn
DX11 seems to have fixed it?
Crashed how ?
If you got a crash handler or an error message create thread in #1265712033295372473 and submit your crash logs.
I got a crash handler I think. I'll make sure to submit it next time
Out of curiosity, did the game at any point during loading screen or bootup crash on you ?
Create a thread, all the files are in your %LOCALAPPDATA%\ReadyOrNot\Saved\Crashes (no, not SteamApps).
Alright whoever said wait it's working now.
Idk why RoN does this consistently but any other game it's fine.
"but it's only in THIS game"
My FPS is still absolute dog water, im really giving up at this point
Yeah it has crashed multiple times while i was changing settingts and alt-tabbing
Update ain’t do much but fix fsr
Yeah, my FPS is still shit compared to pre UE 5.3
It’s a lil better but still ass
I really just want to downgrade to UE 4 at this point
I really dont care about the update if it means I can play the game I paid for smoothly
My game ran so smooth on ue4
You might be suffering from corrupted shader cache which could explain why it runs in DX11 without issues.
Driver level caches can be cleared depending on which GPU brand you have, you can google specific locations for yours.
usually is in %LOCALAPPDATA% or thereabouts
I see what's happening with my game, now. I think the fps dropped a little when in gun fights even before these updates, but I always cap my game at 60. Because of that, I never noticed because even when the fps dropped during a gunfight, the frame rate would still be above 60. With these new updates, though, I lost like 30 frames, thus the gunfights drop the already lower frame rate below 60 and now I notice them and it's affecting my gameplay
Also the game starts with certain graphical options set, even though I change them before I close the game
And some of the graphical options STILL aren't working correctly... AA is what I'm noticing specifically
make all the changes in the ini file
I do, but they don't seem to be working... I put it on read only and everything
I do not know if they corrected the settings change with the patch (I am too lazy to download the game again) but before the patch it worked
I mean, before the dlc dropped it certainly worked
now fsr3 is automatically turned on and in performance mode when I boot up the game, no matter what I do
Damn.... This UE5... He had previously performed poorly in remnant 2 and lords of the fallen. A lot of bugs, errors - nothing works correctly for people.
Did you set your config to read-only at any point ?
I have tested FSR and scalability in general an hour ago, it was saving correctly
Why are my mods not working??
Your mods are outdated and need to be updated
I've been having the hardest time making my game work after the DLC, it says I'm missing a file ? But I can't seem to find it.
I downloaded the mods through the in-game menu though??
I did it over and over again and it finally worked just now. Now we just need the frame rate to not drop so much during gunfights... or make the game's base frame rate higher so that those drops in frames aren't so punishing
for example, I had usually 30 frames more than what I currently have after these couple updates
Does anyone else have the flux raider attachment issue?
That doesn't change a mod being outdated
Game still might randomly just freeze and even after the update. Any fix?
Example:
#🐜archived-bug-reports-channel message
I do genuinely think that gunfights (specifically when AI get into battles) have taken a hit when it comes to performance. One AI will start shooting and I'll lose like 10 or more frames, but if I fire, I don't lose nearly as much
my game crashed at pre mission again
I just played with friend online and my game just froze. While he could run around the map, he could not do anything. AI was frozen.
is this problem dedicated to dx11?
in the launch settings what is the difference between DirectX11 & 12? why shouldn't I launch in directx12 and what does it do?
within five minutes my game crashed again
Following up @errant harbor
It was addressed internally, but we wanted to keep this patch entirely for performance-based. It will be taken care of in Patch 2
Will that be sometime this month?
It will likely drop in August
alright
game still runs like dogshit
hey , where do i find the ski mask
We need another performance patch
i get crashed often while im in the modify loadout menu
Is there any, explanation for this?
Recently threw it in RON-Media for the funny factor but still
I mean is it always like this for you or did you just happen to bug it out? if it's just bugged out I'd suspect you probably did two animations at the same time or something similar to the sort and that probably bugged it out otherwise I'd suspect it's being bugged by a mod.
Gunfighter probably
I mean my 5-7 is fine and I have gunfighter.
My game keeps freezing and lagging way more than usual since the update. The freezes are only fixable by closing the game. Everything stops but the background music.
Describe the issue in detail
so i add the new dlc to my wishlist right before it drop the day it drop it get add mt my steam account i did not buy it
and now i cant play ready or not
every time i try this happens
and i have verify my file
so what do i do
#❓modding-faq-archive message
The corrupt files message is caused by having mods from the previous version still installed. Follow the instructions above to get rid of them.
As for the dlc, do you own the supporter edition? SE owners get it for free.
So that could be why
Then you already own it and don’t have to do anything about it. You do need to delete the old mod files though
okay
Describe the issue in detail
I just got the game today and installed it probally half an hour ago. I try booting up the game but it just instantly crashes and then displays a box saying the game had a major crash and asked me to write in detail why or how it happened. I have no idea why this is happening.
I can get a screen recording of what happens if thats needed
Go to #1265712033295372473 and make a thread, post the log(s) from %LOCALAPPDATA%\ReadyOrNot\Saved\Crashes contained in the crash runtime xml file(s)
game just crashes on the first logo at startup
yeah thats whats happening to me too
cleared mods/saves put it on security exclusion with defender deleted the roaming/local folder
where do i find the "crash runtime files"?
Inside the path I listed, inside the individual folders related to each crash
They will be named/numbered differently
Do the same, make your own thread
K
Im sorry but im still having trouble finding the files
Mod is stuck at 99% and when I clear a manual download it states a file error, telling me to verify my files.
I did a complete delete and reinstall of RON and I was able to set the FSR setting again
there is something that causes the FSR setting to stop working, Im not sure what it is, I think its once you change the game out of windowed-fullscreen that it fucks with the FSR and the resolution scaling
I've seen this problem in other UE games so while im extremely umhappy about it I can understand why it happened
by the path do you mean the tech support rooms or something else? I dont understand
Yo possible breakthrough here, need someone with extensive hardware/software knowledge. When playing the game, If I was in the Police HQ my GPU was at 90-100% but when loading a level GPU usage dropped to only 30-50%
I think this is what causing low fps in missions
yo @grave tapir
C:\Users\YourUserName\AppData\Local\ReadyOrNot\Saved\Crashes, then in one of the uecc folders
I already posted a thread but I just dont know how to find or get to the files that are about my game crashing
CrashContext.runtime-xml
and thats in my files?
It's the file that gives an error that lead to the crash
Put that one from the most recent crash folder in the thread you made
Can you explain the problem in a different way, or provide screenshots and the error message?
im confused i cant find it
If you do not have the uecc crash folder, then the game didn't start enough to make one
yeah i found the saved files for it but no crash files
should i just continue trying to open up the game till it makes the files?
i have a platime of 9 minutes on the game on steam
No, it won't get anywhere that way. My current thoery is that your antivirus is blocking the game. Add an exception/whitelist for the exe for the game/the install location. I can't tell you how to do it, you'll have to figure that one out.
Different ones have a different process or rules, etc.
got it ill try sorry for being a bother
I'm getting a freeze everytime i walk through one door on the first map of the DLC
like, the game just freezes, and i have to close the process
and its simply by walking through one door
I would recommend searching for a similar post in #🐜archived-bug-reports-channel . Otherwise make a post, and follow the pin about formatting.
Having issues with scenery objects only loading in when I'm 5 feet away
2 crashes in a row on multiplayer games? anyone else had this problem, dont know whats causing it
same
every play will have a crash
could be ram or vram
idk if it has been talked upon here but i'd guess so. Yesterday my game was running at a steady 200 in lobbies and 120-130 in game, suddently after the hotfix today a lot of the performance was cut away and the game now runs at 100 in lobbies and 60-40 in game, anyone know why some people have a great performance letdown?
my game just crashed again
my memory and gpu are not fully utilized but it crashed
try using fsr
is dlss not as optimal?
dlss is stuck with quality
lemme load up the game, go in a map and try the fsr rq
guys if i reinstall the game i need to start all over again or my progress will remain ?
In theory yes, in practice, I would create a backup to be safe
%localappdata% > readyornot > saved > savegames i think
Why do you need to reinstall the game
I manage to recover from a crash by hiding and reopening the game
from personal experience i was able to uninstall and keep my progress as the game is saved in the steam cloud (idk abt Epic)
um
im updating my ready or not on steam and uh it said it would download in 1 year...
Has the issue where we have to redownload the entire game at every patch and update been made aware to the devs? The installation just doesn't start or gets stuck at 0 or 1% every time. Then says some files are missing, go back to 98%, completes, the whole show starts again until I uninstall and reinstall.
That is normal with Steam, just let it load, it won't take a year
everytime my game freeze, I just hide and reopen
That is just how Unreal Engine is when they make changes to the files, but the file missing part is not, that is likely an issue with an anti-virus, steam read permissions, etc.
In any case it would be best to look at steam guides for fixing that one
Yeah no, it's not the 46 go thingy, it's the whole shebang of 55 go
They went through and fixed performance issues as well as a lot of other issues, that just kinda is how it is when they make changes. Unreal Engine does not simply slap on changes, it repacks the entire file
the game is taking up 20 gb of ram
The issue might be on steam because it lags my whole download queue as well. Got dark and darker waiting on an update, moved it up to replace RoN and nothing happens. RoN banner is still there but the queued game is Dark and Darker with no progress made whatsoever.
Anyone else crash in the lobby if you get too close to another player? Ive had it happen four times in a row now
guys if your game happened to freeze, try hiding the window and reopening
it wont let me launch anything else like CS2, and it says it is downloaded 100% but it doesnt download
Same problem.
Restasting the whole pc doesn't fix it. What I found to work is to launch a verify intergrity of files, wait for ready or not to come back as having missing files, uninstall it and reinstall
When it hits 100% it should start working on the files on your drive, even if it says the disk isn't moving. Give it 10-20mins and try not to do anything to interupt it
also tried to my pc and steam
so unistal the game?
uninstall*
It's what I do. I let it run for 4 hours and nothing moved
23 gb of memory usage is crazy
Yeah I get crazy stutters now...
Like is it my settings? Even everything on low now with DLAA still stutters. Is DLAA just broken?
Where FSR 3 FG
DLSS is bugged to quality, use FSR instead and don't be afraid to raise most settings except AA/PP and per-obj shadow
This was with the recent patch right? Because it worked great for me then.
Native upscale good or something? Ive never used FSR
my fsr3 gave me a huge boost in fps
^
at the cost of quality
Which one Native upscale or quality?
performance
You can offset it by increasing your other graphic settings, my setup is all epic (except for AA/PP) and FSR on quality.
Native upscale seems alright so far. No stuttering and still looks decent. Gonna miss DLAA tho
my game still freezes in valley of dolls
What are your specs
you wouldnt want to know
I can't offer any tips if I don't really have a perspective
because I am using m3 pro, 18 gb ram
Its just a thing happening to people right now, devs said theyre working on it
wait, I thot its only me encountering this
Hmmm, I am not sure exactly when it comes to Apples stuff. Try setting your graphics on medium with AA/PP off, FSR set to balanced or performance
Im on lowest graphics with fsr to performance
What about object shadows?
off
What is your resolution settings?
1512x982,100%
If you can go down to 1440p I would try, but there's not much I can recommend by the sound of it
Hi, I accidentally deleted my 'ready or not' folder in the steam folder, so now I'm getting a harddisk error when I reinstall the game on steam.
Try going into your recycling bin and undelete it
Already emptied the bin
My game is completely silent now, i can only hear sound in the option menu how can i fix that
What error exactly?
Delete any mods you have #❓modding-faq-archive including VO mods then verify the files
A harddisk error
It's because of the folder, not the mods
How do I delete all the mods in the folder though?
thanks
Getting way less fps post update for no reason whatsoever
All maxed, DLSS set to Quality, I used to be getting roughly 60-80, sometimes even 100, now it NEVER goes above 30, RTX 3060 12G
#❓modding-faq-archive and then verify the game files
My game got messed up after installing a mod
Use FSR, DLSS is bugged to quality
God damn it, FSR gives terrible antialiaising performance for me, guess I'll take that over 30fps
You can run the reshade .exe again and set it to remove
Wheres the reshade.exe?
You would've installed it from their website before setting up the mod
It's an independent software
Ah seems to be running even worse on missions now (FSR on quality and I'm getting 35fps), I guess I should just wait for the next patch?
What are your settings
Just completed all base game missions on S and now I can no longer access Home Invasion DLC
It is not playable in commander mode, only practice mode and COOP until patch 2
Gotcha, thank you
Basically everything to the max except render scale cause it'd lag even harder
Try lowering post processing and AA
No improvement, still hardly pushing 40, game just looks worse now
I reckon the only real solution is just to wait for void to actually fix DLSS proper
I feel you, I got a 3080 ti and used to play at 4k with over 100 fps and now I can barely get 40 lmao I gave up playing until it's back to normal
Fr, I might just do the same.
I used to easily push 100 on my setup pre DLC, then that dropped to like 60 in most levels and 80 in station, and now it's hardly pushing 40 in all levels and 80 in station lmao
hi everybody i was trying to q the dlc with a friend and we WERE able to play dorms map after completing my friend lost connection to host (me) and ever since he was not able to join me since. any way to resolve that?
probably a steam issue but does anyone know how to fix this? only happens with ready or not and the only way ive been able to fix it is full reinstalling the game
Got multiple drives or just one?
multiple, but i dont think its a drive issue since this is the only game this happens with and not the others on that drive
Cause this happened to me because RoN was for some stupid reason being installed on my slow hard drive and it was never meant to handle such loads so it just stopped progressing
I set up a symlink to a proper drive and it immediately completed the download
Try redownloading it but open up resource monitor and see what drives are in use and which directories are in use
The file path shows a directory, the drive letter is the most important part, if it's of your slow drive then set up a symlink, if not, no clue, sorry
I uninstalled my game and verified my game files but I still have this error
Thanks 🙏
hey my mods arent working I used the ones from the main menu
Does this game really require dlss at 1080p? Is it really that poorly optimised that it can’t handle native 1080p on 30 series cards?
What do you mean bugged to quality?
i bought ready or not back in may of 2023 when it was in beta which i presume means that im a beta supporter and that i get the dlc for free but when i played the game i couldnt access the dlc and said that i needed to purchase it. can anyone help?
Supporter edition was a separate purchase at the time and is no longer available.
?
If you have the Supporter Edition DLC in your DLC tab for the game, then you have it.
In my case I've it cranked up high all the way and I use DLSS to bridge the gap and optimize it just a little further
Dam it I replayed to the wrong person
thanks btw
It was the message below you
Hey
I really need help
I don't understand why certain mods work in the games and others don't??
I already downloaded them manu
ally
Manuelly*
Which mod(s) are you referring to?
Maps need updating
None of the maps have been updated for UE5, you need to uninstall them. Only use mods that are uploaded/updated after the DLC came out on the 23rd.
No, until they are updated by the author.
Customization unlocked mod has not been updated though, but it's still working nevertheless
It's not a map though
It was. Both of them were updated
Oh
Oh
Welp after a fresh reinstall of the game just before the update with absolute zero mods and completely updated drivers, every time i launch the game it goes full black screen. (no message about the file validation either)
Check your specs buddy
did they update the game to be unplayable for people who already had it working?
cause i meet the specs currently listd on the steam page
why cant i donwload or open ready or not? it says i have missing download files
i was playing with my friend in ¨The Spider¨ and our game crashed, at the same time and is always in the same place
Failed to read file ../../../ReadyOrNot/ReadyOrNot.uproject
i cant launch the game, tried all versions and i sure do not want to clean all my progress and mods
is there a fix to this?
im unsure if its my mods being outdates so as im texting rn im gonna delete some of my mods
Verify game files in Steam.
Is your needlessly aggressive antivirus blocking the game ?
Don't have one
thanks, fuck man "21 file failed to validate and will be reacquired" gotta wait another 44gb or something with 30mbps 😭
Could you post the entire error message or a screenshot of it ?
i really need help my Ready or not wont start up it black screens after i deleted the VO's i added in and now it just wont start
Is there a way to reset it completly
I'd recommend verifying integrity of game files
Yeah it didnt work idk what to do
the constant FPS drop is fixed .
but the stutter is still there with the random crash . hopefully gets fixed with the 2nd patch drop
Game crashes after beating the achievement, Meldonin
Complete all ‘Dorms’ main objectives in five minutes. ---- After my team and I vote Yes to end mission the game crashes and we dont get the achievement. Please fix it is frustrating
Hey don't if this is the right section to put this.
But can I use a controller to play?
If simple verification of files in Steam, which has nothing at all to do with game code, brought your PC down, you have more serious issues than whatever issue you have in RON right now.
Not officially supported and from what i've read it no longer even works with SteamInput or something.
You cant enable it on dx11
Oh word thanks
One can argue that those who know what "rendering API" means also know that FG is DX12 feature 🧠
Hope the dev can make a better localization for these so it's understandable by an average gamer.
Following latest update, I receive this 3x followed by the task going totally unresponsive. Happens regardless of whether using DX11/12. Reinstall currently in process.
Remove ALL your mods #❓modding-faq-archive
I have an RTX 2080 Super, is that not supported? if so, the caption could use work
Yeah, you need 4000 card
ty
Heard, ty. I assume a clean install will have the same effect since that's underway already but will refer to this if not
If by "clean install" you mean you went into the game directory and manually deleted files, yes.
Otherwise that is no clean install and the mods wll still be there.
did the update reset all the settings for anyone else?
Dang. I hoped for a silver lining to uninstalling early 😂
Indeed, it's pretty much the same issue as that rendering API i was talking about just few replies above.
It's not descriptive to an average user.
Which update ? The hotfix ? No, the main content update that happened few days ago ? The directory structure has changed.
yea i've only just updated the game today, didnt have time when the update released.
do you know what exactly changed? maybe i can restore my old settings, i changed pretty much everything from the defaults :/
Old settings were stored in %LocalAppData%\ReadyOrNot\Saved\Config\WindowsNoEditor
Now they in %LocalAppData%\ReadyOrNot\Saved\Config\Windows
didn't play the game for a week and now my fps is just staying around 19-20 fps. I used to run on epic settings hitting around 30-40 frames but now it wont go above 20 fps.
i9 11th gen cpu
3060 RTX 12gb gpu
64gb RAM
Render scale on 100%? Dx12?
did for both Dx11/12
Render scale tried at 100% and 90%
What i9 11th you have exactly?
11th Gen Intel(R) Core(TM) i9-11900K @ 3.50GHz
you just saved me 2 hours, thansk!
Check if you game actually run on your 3060 instead of integrated one, 30-40 on epic settings before update is very low for this setup
it has always been low for a lot of things.
That not ok
You have a 4K monitor ?
did you connect your monitor to the GPU or the mainboard?
yep
gpu
You have enabled dlss/fsr in game?
hey guys, ive also been having performance issues. i used to run the game before at a smooth 120fps at 2560x1600 with max settings but now it stays at around 50 fps. Specs of my laptop are
i7 13700hx
4060 8gb
32gb ram
(Also, im running linux if that makes a difference)
no. for some reason it is saying DLSS Frame Generation requires an RTX GPU
even though I have an RTX.
you need 4000 to enable frame generation
ah
but not for dlss
DLSS Quality set to balanced and it sits around 27
What about fsr?
FSR3 Quality set to balanced and hits 36/37
3060/Ti is at maximum 1440p tier card in not-so-demanding titles, else it's straight up 1080p tier.
Meaning in order to have any level of expected performance, you'll have to use upscaler in their at minimum Balanced, if not straight up Performance mode.
Currently, DLSS is broken and only goes to Quality regardless of what you set.
You can use FSR3 Balanced/Performance to get normal levels of performance back.
ok. thank you.
I think what is causing the low FPS in missions is the AI
Is anyone else having the problem of the game instantly crashing on launch? (After the update only.)
i've had one crash, haven't had any otherse
it was on the postal service map, had a really good run going, next round said fuck it and killed everyone
@grave tapir yeah it just fully fixed all my shit
why is it greyed out? I own the dlc
You can't play it in commander, only practice/multiplayer mode
thanks
which is weird, you think they would have tied it into the main campaign
this game is raming my cpu
To be improved in Patch 2.
Feel free to provide more details.
And remove your mods.
There really are no details to provide, nor did i have any mods, just completely crashes on startup.
By the way i managed to fix it.
There's always that possibility to be more descriptive really.
Also, if you did fix it, please provide details on how so others can potentially use that to play the game 🫡
does ron now use lumen?
I was thinking of disabling it for more fps but since it's off then it's all good 
RoN doesn't use any of the UE5 extended feature set.
If you gpu bound disabling TSR might give you good boost
nah I'll stick with dlss for now even tho it's stuck on quality preset as of right now
setting post process setting to medium from epic gave me extra 60~ fps in the main menu
As usual the main menu scene has an unnecessary complex lighting and post process setup, its like that for almost any modern game, especially UE4/5.
Fuck 3D menus entirely, really.
can someone please help me with something
my game keeps freezing at the 2nd mission
23Megabytes a second
3 minutes into the mission and the game freezes then i need to restart the PC again
i tried all graphics settings and even DirectX11 but doesn't change anything
yeah, I figured but I actually like the medium option more just like before the patch because it seems it adds this weird hazy/bloomy and soft look to image and I hate it
Good Day, I am experiencing crash on start - i start the game in any mode and the crash reporter pops out. The Crash Log says:
<CrashType>GPUCrash</CrashType>
<ErrorMessage>GPU Crash dump Triggered</ErrorMessage>
Nvidia GPU drivers are up to date. Kindly looking for help on the matter, thanks 🙂
hello, can you please tell me where can i find the file to see the error codes
Hello! Here are the files
Create a thread in #1265712033295372473 so as to prevent this getting lost
Hi guys, got this super weird bug where I had completed missions with an S rank and i had everything unlocked previously, however it is displaying those missions as S but all the cosmetic stuff is locked and i have to get the S ranks again unlock it... dunno if that makes sense but yeah strange.
is there a way to stop the game crushing? i was close to finishing greased palms and i got crashed
Shadows on epic settings greatly reduce performance, and these shadows do not visually affect in any way. Try to lower them to a high level. Try also the DX11 mode, but in this mode there are very strong fps drawdowns in some places, but on average fps is more than on DX12.
use medium settings it doesnt really change any viusals at least for me but fps are higher
roger, ill change shadows
also, for me, dx12 stutters like crazy, and also fps is roughly the same as dx11, maybe even a bit less. i think dx12 problems like this is more of a linux problem rather than the game's fault
is nvidia reflex dedicated to nvidia cards
yeap
For the sake of interest, I tested other games on DX12 today. For example, in helldivers 2, I'm fine, I don't have any sudden FPS drawdowns. Only this game behaves like that.
yeah on helldivers 2 i get same performance on both dx11 and dx12. no stutters or anything on dx12 either
Hey, i cant use the DLSS Frame Generation because i need an RTX GPU but i have the RTX 2070 Super, can someone help me fixing it?
You need 4000 card to enable it
Then the menu point should say it, because 2070 is still rtx....
Im noticed high cpu usage what about you guys
theres a mac build?
No, they are playing through Rosetta, which is not supported so go figure.
heeheehee
The wording should definitely mention that, hope this localization issue gets improved 🤞
Hello i cant start RoN it says there is a corrupt data and everytime i start my pc the game automaticly deinstalete itself
Remove your mods since they are not compatible with the current game version.
thank you so much
my game freezes when shootout happening. do you guys know the solution? pls help
@robust basalt so i change the shadow settings alongside some other ones like view distance, and i got like a 10 fps boost. but i changed smth with my filesystem with how games are stored and its actually running much better now, can reach upwards of 80fps
hello, my game cannot start after a recent update, everything worked well before the update, reinstalling did not help and checking the cache too
Feel free to be more specific-
Thread created, thanks
What have you changed in the file system?
I use BTRFS as my file system (windows use ntfs), btrfs has subvolumes for organizing and snapshots, and I made a new subvolume for my Steam folder and moved everything there. This results in no snapshots, which also increases performance because when stuff is being written it doesnt have to be copied
How many FPS do you think will my game run?
CPU: R5 2600
GPU: GTX 1650
RAM: 2x8GB RAM 3200mhz
Ive downloaded the mods and restarted but when im in head quarters they are not working, is there a fix to this?
huh? how did you do that
what mods
I dont know if this is the right Channel for this Question, but will Mirror Reflections ever come back? It was Sayed they will be added back with RT but now we got the first DLC and they are sill missing.
same here, happened 3 times now
I am on linux, thats how
Windows cant
Not gonna be able to help with mod io. but i can see that one is a map mod and map mods havent been updated yet
ah okay thx then
mod io is basicly the broken hacky way of installing mods.
Guys
Can anyone help me, I installed a clean wipe for RON after home invasion, and yet none of my mods work. (I recently downloaded them lol). I placed them in the paks folder, but it doesn’t even show ‘modded’ on the status on the main screen
Yea all of those except customization unlocked and visceral blood are outdated, though those two may also be outdated on mod.io as I'm not sure if they've been updated on there. I would recommend manually installing the mods on nexusmods as to make sure you get the most recent versions of the updated mods and this should fix them not activating as it doesn't seem mod.io mods are really installing at all recently based on the reports everyone has been making on it.
Well the "modded" label doesn't seem to appear anymore at least for most people in the recent update. If you're using in-game mod.io to install mods I recommend switching to manually installing them from nexusmods and make sure they're up to date.
Most of the mods don't work anymore because of the UE5 transition so there's that + like @remote delta said download them from nexus and make sure that "Last Updated" is on or after July 24th
Wait are you serious lol.
And yes I’ve downloaded mods that have the update after July 24th.
SO IT DOESNT SHOW MODDED ANYMORE? that’s so screwed
Yea based on multiple people's reports on it, I've only seen one person who had the label in the recent update so far.
So weird, do you have any mods that work?
did you install them from nexus
Yessir.
A good number of them yea.
Take a screenshot of your paks folder and maybe we can figure out what's going on
Can you point me in the direction? I’ll reinstall ron later
I got so pissed off lol
gunfighter works and thats a W
And my performance is horrendous not sure why compared to be, I had like 102 fps now it’s 30 in station
Lot of people report performance issues in the recent update not sure if there's any fixes yet.
whats ur specs
2070, and an I7 at 4.0 ghz
ram?
It’s not the best obv, but it got the job done before
32 ddr4 , game is running on a 1 tb ssd
and what resolution r u playing on 1080?
1440p
that explains it
No I was on 1440p before
yes but before was ue4
you're running a rather old card on one of the newest engines out there at 1440p
consider scaling ur resolution to 67%
i downloaded some mods and theres no more voice lines i spam f for yell theres no sounds not even subtitles
and turning shadows abient occlusion and view distance to minimum
Oh oki, I’ll do that when I re-install
the fact ure on 1440p is the big thing for u
Did you download any voice mods that you know of? would have had to replace files in the VO folder.
if u can try using DLSS if not go to resolution scale and put it at 67% that should bring u to something like 2050x1050 resolution or smth
Has there been any issues with the latest update taking an absolute age to downlaod & install?
i dont think i have its just completely gone it happened before but i had to reinstall the whole game
OH I DID NOT USE DLSS
idk if 2070 even has dlss
It does bc I used it before
Alright will just to check, you should launch the game in safe mode to see if it works there. Do you know how to launch into safe mode?
but u sure as hell cannot play at 1440 native resolution on a 2070 in ue5
I am not having any general issues with the internet connection, but its takjen around two days so far
how do i launch in safe mode
steam > right click ron > properties > launch in safe mode

alright thank you
Yea try it out there, if they're working than it's a pak mod causing the issue if they're not it's a VO folder problem.
hello, my game cannot start after a recent update, everything worked well before the update, reinstalling did not help and checking the cache too
i actually do have one but ive had this for a while idk if you know anything about htis mod
Download, or install/patch ? Because there is a difference.
Feel free to be more specific.
i tried safe nothing changed also its not just voice overs ig its other things like the metal detector noise wont go off
I've said everything that bothers me.
Do you get any error messages that pop up when you launch the game?
no, that's the problem that the game starts for 3 seconds and immediately turns off without a single message about it
Update/patch
The game worked well before the update
Patching data is happening on your PC either during or after the delta (difference between new and old data) has been downloaded.
So it's entirely reliant on your PC.
what do you meann
il try file integrity
Does anyone know solution or if there is to arms going invisible when arresting people and then reappearing once the animation is done?
and what should I do, I can't return the funds
my computer is very good and expensive
You have just been more specific 👍
Go to ".\SteamApps\Common\Ready Or Not\ReadyOrNot\Binaries\Win64"
Attempt to launch the game directly through the executable file.
Report back if you get any result.
Like in game mod.io could only handle .pak file mods anything else would need to be installed manually so any VO mod wouldn't even effect the VO folder meaning no changes would be applied, this is given the mod was only automatically installed through the in game mod.io menu, which I'm guessing is where your screenshot is from.
If it's not caused by mods then it's a bug in the game that needs to be fixed by the devs.
yea i installed it in game
i see the same thing yeah
i uninstalled the mods i downloaded and now its still not working for some reason
i assume that its a bug ingame as i deleted all mods when the update rolled out and it went fine but the next hotfix, i started to see my arms going invisible
You could try lowering your FOV if you have it set high and see if that changes anything as I know there's other bugs in the game that involve things not appearing depending on your FOV.
this is the error that has been highlighted
I do get that bug too but I haven't thought to test that myself.
@remote delta im just going to reinstall the game do you know any good places to get mods from?
Nexusmods and make sure they're updated before downloading anything that was uploaded/updated on or after July 23rd should work.
i did try tuning fov, hud, changing video settings to see as it does cause artifact effects if set to high but none seem to work
Not familiar with this particular error, let me do some research 
I need help guys I removed all the mods still it’s showing me this
what to do ?
Yea than it's just a waiting game for it be fixed by the devs, would make a bug report on it if you haven't already.
thank you
i was checking on bug reports to see if others have it or if it was only my computer, ill probably write one down
Well, I will be waiting for news from you
#❓modding-faq-archive you have not removed all mods
Be patient.
Could you please create a thread in #1265712033295372473 , it will be easier to consolidate the data.
Also please provide basic specifications of your PC (hardware, operating system, and so on)
did exactly that
If it's start in safemode just fine you still have mods
1050ti video card
The achievement Meldonin crashes our game everytime me and my two friends actually beat it. None of us get the achievement either. Right after we vote to end mission it crashes
We were able to beat it twice and both times it crashed. So you can replicate it. For info: my friend has the DLC and me and our third guy do not.
Windows 10 v1607 is not meeting minimum requirements for DX12.
If you do not want to update your system, try to run the game in DirectX 11 mode.
It doesn't work either
Why the replay feature doesn’t work
Any solution?
Delete all mods you have
Still the same old settings saving bug.
Okay thx
I'm trying to remap the movement keys to where I have them in all my FPS games. I use MMB for forward, DEL and PGDN for left and right, INS and PGUP for lean left and right, HOME for interact and END for backup. For some reason, the END key will not move me backward. If I assign END to something else it works, it just won't move me backwards. Can anyone provides so help on this? I've been mapping my keys like this for MANY years so I really need END to work. TIA.
C:\Users\YourUserName\AppData\Local\ReadyOrNot\Saved\Config\Windows and open input.ini. Use the list of keynames here: https://nerivec.github.io/old-ue4-wiki/pages/list-of-keygamepad-input-names.html
You will need to probably replace the inputs for the stuff that the game doesn't let you rebind normally in game. I strongly reccomend not double binding keys in game, bad things will happen.
Also, you get the award for the strangest keybinds I have seen
Oh, and you need to do this with the game fully closed, and make sure you save the file when done.
hi, just finished the game in ironman mode and didnt lose and officer, Didnt recieve the achievements but i got the watch, any solution?
i have a few unresolved maps but I got a score on them previously
If you did not get none of 2 achievements for iron man you need replay last mission for higher score
ok thanks
i cant launch on dx12, it says
"directx 12 is not supported on your system. try running without the dx12 or d3d12 command line argument"
I even set it to ask to launch and DX11 and both doesnt work
What does it say when you start in dx11?
im more concerned with the in game FPS being dog shit, im having to lock my FPS at 60 just for it to be consistent, I used to be able to do at least 90 consistently pre-patch
For some reason in Windowed Fullscreen, I cannot change the screen resolution. Also for some reason the UI size seems to reset after every session
Windowed fullscreen using your desktop resolution, as for UI size it's known issue
even after this patch, i still have a problem of the game freezing and being very laggy when opening doors. does anybody else have this issue?
For the error you posted, either your Windows version or your GPU driver version is below minimum requirements for Agility SDK and they need to be updated.
For the DX11, be more specific.
this is on dx11, as dx12 doesnt let me load in to the station
Could you be more specific about the DX12 issue ?
Have to re-install latest NVIDIA drivers every time I want to play the game. Upon second launch, main menu runs at 12 fps and never changes, HQ is even worse.
New driver install = 90+ fps in main menu and HQ.
Only seeing 1% GPU usage and 7-9% CPU usage with the low FPS. Game not utilizing them for some reason.
5800x3D cpu
3080ti gpu
32gb ram
DX12, DX11, safe mode- all launch options give same result
so, i can load in to the main menu, and that works fine. but once i load in to the station, and the loading screen hits "100%" the game freezes.
It's compiling shaders, how long have you waited for ?
i think 3-4 minutes at most, ill try to let it sit longer
What's your CPU?
amd ryzen 3 pro 2100GE
and just for sure, my other specs are: nvidia 3050, and 16 gb ram. my drivers are updated, and so is windows. the only thing i havent tried is completely wiping my game
Yea it'll take a while.
It froze on me for few seconds on 5800X3D.
I tried doing an update scan but I could find anything
samething as dx12 word for word
yeah i didnt think about letting it sit, ill let you know if it works. thanks for the help
If you are stuck in an old/legacy line, automatic updates will be useless, in general.
how to I get unstuck with that?
Depends what's got stuck, the driver or the Windows, you have to tell me so i can point you to the correct direction 
Like you mentioned its probably my old gpu driver, should I try to manually download a new one I can try but idk if that will work.
Post the versions really
What is going on? screem is shaking vertically
Mods aren’t working, when launching the game it just says ‘sterilisation error’, does anyone know how to fix
Most (if not all) pre UE5.3 mods are broken
So you'll have to delete the mods
wow, it actually loaded, though it took 5 minutes 💀
So I can’t use them at all then?
Yes
Ok thank you
Wait for them to update the mods and get the new ones
Some new mods don't work on windows 11
extremely buggy
I still have windows 10
They should really fix the freeze since it shouldn't do that even if you peg the CPU to 100%.
Never seen another game do this during shader precomp.
Ur good then, for all post UE5.3 mods
Ok thank you so much
yeah they should, the game worked fine before, though i never played on dx12. loading in to a mission is also taking ages now.
You're welcome
The game never had PSO caching before, that's not the issue.
The freeze is, it should absolutely not freeze and it should inform you about the process better.
Hell if i were on their QA team i would tear them apart for stuff like this, lmao.
u5.3 dx11 loads fast and works fine, but it constantly freezes and is generally unstable.
i dont really know how to find out about the errors, the game never actually crashes. even spamming the mouse button doesnt make the "xx.window is not responding" screen show up.
haha yeah, i just hope they get on it quick, i do still really enjoy this game.
the only thing i havent tried is resetting all progress and loadouts
the mission finally loaded, after like 8 minutes
and it froze
Does anyone here have any proper working mods
i purchased the dlc yesterday but never showed up in my steam downlaods and not accessable in game. i cleared downlaod cashe and also deleted and redownloaded game but still no dlc or availibility to redownload? any suggestions on what to do next thanks
DLC coming with base game, you dont need to download it
ive had the base game since release
seems that its not attatched to it but it has been purchased
how do i check that
in game check right upper corner
The game didn't save my rank for a mission I did, is there something I do?
All objectives must be completed for the score to save, including soft objectives
yes it is 55116 just checked
or do i need to complete main story to unlock
You should have new weapons in locker and maps in practice and multiplayer mode
you cant play dlc maps in commander mode
ok ill check practice mode
yup its availible in practice mode thanks for your helpo im dumb
Where can i download or buy older versions
is there a reason why voip is not working or just me
Or i cant
Owning Ready or Not on steam allows you to use steam to downpatch the game to access older versions. Look it up online
Ensure that your headphones/microphone are at least the default communication devices or the only active devices in the sound settings
And I think they finally added the option to set it in game, so make sure it's there as well
If this is you then yes:
https://steamcommunity.com/app/1144200/tradingforum/4515506143563705356/
Also why on earth was RoN troubleshooting created under Trading forum is still a mystery to me 😂
been running into an issue where i had to delete all the mods because of the update right. try to load it up gets stuck on black screen i am currently trying to run a clean save but if this doesnt work any other ideas?
i cant join my friends it says i cant connect to the host..
So you tried to run the game in Safe Mode ?
i unplugged and plugged it in. seems to work normally outside off the game. gonna test in game
yes it was still just black screen
Could you post basic specifications of your PC ?
nvidea geforce rtx 4060 ti 64 gigs ram amd ryzen 7 3700x
Windows build ? GPU driver version ?
Steam > Help > System Information for example, or task manager, nvidia control panel, etc. for the driver
hud thing is on top left?
when i switch guns and stuff, instead of appearing on the bottom middle, it appears on top left?
i just installed the newest driver so whatever that one is
ok now its fine
any ideas
I tried repairing ready or not after the new update because of mod issues, during the repair steam freaked out and kept trying to reinstall ready or not. I used the steam tool to clear the download cache and I've been stuck on the "stopping download" screen for three and a half minutes at the current time of writing. How can I fix this?
Just reached five and a half minutes
I just did dorms and got a D rank, but I don't see the rank near the missions name at the mission select menu. Anyone else?
I also set the FOV to 120, but it goes to 90 when I aim.
its still not responding
Disable ADS Zoom in gameplay options. Also lots of people seem to not have the score getting recorded but doesn't seem to effect the ability to unlock achievements and the like.
It's working.
Thanks.
Issue solved
You didn't get the soft objective then
why is this showing??
I validated my files, and everything was fine
nevermind, the mods I have havent been updated to the current update
The rank only shows if it's full?
The rank only shows if you collect all objectives, including optional. Doesn't have to be S, but you have to gather everything.
I see, thanks.
thank you, so when devs update their mods, then I can redownload them?
When the authors do yes
alright
Does anyone know a good enough cheap pc that could run Ready or Not? Just the bare minimum
mine runs it fine and its around 800-900
I have a 6th gen i5, 16gb ram, 1060, and i bought it for like 300€. Runs fine after the new update
you could always subscribe to geforce now and run this game on ultra with silky smooth fps on a old pc/laptop like i do 🙂
i play this game on a business mid range laptop thats 3 years old 🙂 but via geforce now 😉 saved myself thousands of £££'s on a gaming rig.
Never seen that before, what are your in-game fullscreen settings
here
I wonder if it's the FOV, try testing on 100
Ok
Try switching to fullscreen (not borderless)
I use this one because I move my game to my bigscreen, but, I'll give that a try
Hmm, it's still bouncing, that's annoying...
What are your specs
Does this happened on windowed with smaller resolution?
Delete mods
Can't really test it now cuz I'm actually working and using screenshots I already took XD
I live above where I work and I had to sprint up and down to test stuff
I'll be back in 29mins
14 mins
anyone know why i cant download any mods from mod.io ingame, even though it says that it is clearly downlaoded the actual mod doesnt show up
Mods updated before the 23rd will not work, only use new ones
Hey guys has anyone know how to fix these loading times I am getting 2-3x loading times before the update
it is not allowing me to enable dlss frame generation says dlss frame generation requires an rtx gpu depsite me having an rtx gpu
You can enable it only with 4000 card
hello I have a problem after the update,
In the first gas mission I go very smoothly and finish my mission, but in the second hacker mission, I only go up to the second level and the screen freezes
Could someone know what it is please?
oh ok
question does it have an impact on performance or atleast a big one
Yes, with disabled FG i have 120 frames on relapse, with enabled i have 240+ with a bit of input delay
I have 4060 and 11400f
If i lower some settings i can get all 300
thats alot damn.. plus where do i change my voice i forgot i cant find it at all lmaoo
Only in multiplayer and only if you join someone lobby, if you host you always will have Judge voice
ah i see thank you
I deleted all mods, verified game integrity 3 times, re-installed it, it still wont open
Finished work at 9, figured the bug out, I reinstalled the game without mods and it works, when I reinstalled gunfighter UE5.3 mod it happened again, so I guess mods the mess with the game mechanics cause this
Weird
my friend doesn't have this problrm, so I guess it only happens for windows 11 users
my game suddenly is at only 30 frames now after turning on gpu scheduling @scarlet narwhal
Not sure about this, does enabling FG increase framerate for you?
Are you sure you aren't using an outdated version of the mod
whats fg im sorry if it sounds dumb
Frame generation
I'm not, just checked it
When i turn it off it goes up to 50 but when i turn it back on it stays back at 25 and drops to 5 often
What your specs?
Verify game files in Steam.
Remove all pre UE5.3 mods
4060 ti and ryzen 5600x ive been on max graphics and ultra quality before but now the option is gone and the game is much lower on fps
ah ]
i did
im trying that rn
Then, this is the fix
bet
hi guys! my friends keep trying to update the game (both the home invasion update and the newest patch) but the update keeps failing or keeps saying that itll take months, not sure if this a steam issue or not
I have been getting continuous game crash's ever since I've updated the game, there have been no mod's installed into the game, I verified the game files, and nonetheless reinstalled the game however I still get this crash. It happens as soon as I load into the game and walk around for a bit.
I could say the same, game keeps freezing at random moments. Can't even close it normally, have to use the task.
Mine doesn't freeze, like I'd load in fine and all, then when im in game I'll just walk around and then within maybe minute 2 or 3 of being in the game, poof that crash comes out.
known issue, theyre working on it
Lot of issues with this recent update eh..
Oh wow.
So no one is able to properly play the game?
I haven't touched the damn game until the update lmao
me and a seperate friend were able to download the updates just fine btw so im not sure what the problem is
Failing how ?
Installation (patching) phase is solely reliant on disk and CPU performance of that PC it's running on +- antivirus or some other app interfering.
my friend is saying that it just fails and says that steam says it's "missing integral files" so he thinks it might just be a steam issue?
the same happens to me
Alright well I launched it clean with no mods and it works fine? I'm so lost.
I wonder if the new sound overhaul is causing the frame rate to be lower than preudpdate
Hmm, i'll give it a shot aswell.
Do you have to complete all the basic ready or not missions to unlock Home Invasion?...
It's a DLC
I have the DLC?..
oops
You can run them only in practice/multiplayer mode
Seriously?
Yeap, but they will change it in next patch
Sweeeet.
When opening the game I recieve and erroe stating the I need to verify "Installation" any help for that? I did verufy the integrity of my files but did not clear my issue.
It's your mods..
Is it bannable at all to download an play an older version of the game? I might just rollback to before this update to play.
hey there, is anyone experiencing constant stutter?
Pretty much everyone, yes.
Nope, you can download any game version using steamdepot
Alright, then i know what i must do. Thank you.
was it happening before the latest patch? it wasn't for me.. 😦
Before the change to UE5 with the launch of the DLC, my game was doing fine. The latest patch i think just introduced freezing and crashes with fixes to the resolution issues people were having, which was causing low fps.
yeah, i dont know how people are being able to finish maps, i just get freezes
hopefully there's a workaround soon. this was one of my favourite games.. now it's un-playable for me
Says I need an RTX GPU, but I am using one?
On top of that, for some reason my game is running at like 10 frames reguardless of what graphics preset I put it on, does anyone know ?
could it be that its trying to use integrated graphics?
No, but you will have to deal with all the bugs those builds have
It is 40xx and above only
Ah alright
I've just set it from "Let windows decide" to high performance, should hopefully be fixed now
me, happens so far every time at the dormat level just a fewminute in
You were correct. It was using my CPU 😂
My game has green lines around for some reason and idk what to do about it. I am also unable to move character's head to change point of view. I verified integrity of game files, didn't work. I uninstalled and installed entire game, didn't work. I have no idea what to do anymore. It's not the first time it happened. I had this issue before but I left the game untouched for 1 month and then problem somehow disappeared itself. If anyone could share any knowledge about this, I would highly appreciate that.
And not deal with the game breaking bugs this build has, i'll take the older one. Thank you.
after the new patch, ready or not keeps on not responding in middle of missions, I tried turning down the graphics and stuff to see if that has anything to do with it, it helped with the frames but still kept not responding.
I would double check that your graphic drivers and windows are up to date
This, is a weird one.
yes, it just came to my mind. Perhaps my graphic card's drivers are outdated.
my game, after the new update, freezes as soon as there is a shootout
Same here
damn
welp... I downloaded the latests drivers for my graphic card, didn't work... Still same issue : \
This is the fps I get on the menu after the update on a RTX 3080 ti, when I used to get 100+ 🤡
Please revert this update lmao
Try disabling your anti-virus then relaunch the game
Maybe turn down your graphics settings?
Doesn't help
Enable FSR in addition to tweaking your existing settings.
did it already, also didn't work : \
No idea then
For mods that have been updated, will they work becuase I have subscribed and tried manually downloading mods such as in game menu and blueprint loader, as well as a couple weapon skins and visceral blood. Any help?
Hmmm, try restarting your PC, disable your AV, and then try again. Mainly just to finalize any changes with your drivers, also check windows for updates
They should if it is updated, yes
So if I do it manually you take the file extract it bring it to the paks folder then drop in the extracted pak to the paks folder and it should work, becuase none of them are working and im not to familiar with the modding scene on this game :/
Basically yes, the raw pak, not the zipped up pak. You can also create a "mods" folder and put them in there and it will work, so its separated and easy to remove/move
Ok, is there any reason with the ingame menu when i extract the all in one file and drop the paks into the folder, then i launch the game and it doesnt work. Im pretty sure its updated becuase the files were dropped today. Sorry about all the questions.
I am not sure, I wouldn't be able to comment on how the in-game system is working atm
Have not toyed with it currently
Ok and one more question so things like gunskins that get realeased like 3 days ago is it the same process becuase when I use the same process it just causes the game to get a integretty error like the first day.
Hi everyone, when i start the game i have an error corrupted files, steam does'nt repair
If it says the same error, then they're broken still, I wouldn't be able to say more
ok, thank you so much.
Also this is the correct file path correct?
Yes
Hi guys, got this super weird bug where I had completed missions with an S rank and i had everything unlocked previously, however it is displaying those missions as S but all the cosmetic stuff is locked and i have to get the S ranks again unlock it... dunno if that makes sense but yeah strange.
hey since the new latest update my mods arent working can someone tell me what to do
#❓modding-faq-archive remove them and wait for them to be updated
It can happen, did you use the launch option to clear mods/save data?
yes when i first started it
That sadly deletes your save, including maps and cosmetics, you'd have to ask around and see if someone can give you a 100% save file
Yeah I think so, I must of done it ages ago, oooh ok fair enough i will ask my mate for his save file 🙂
one of my saves got deleted but i still had the iron mode save that completed the game haha
Is there any way to install mods in game without requiring a restart right after? Myself and many other people playing RoN on Geforce now are completely unable to use any mods because it requires a game restart, which closes the GeForce session, and upon opening again, the mods aren't enabled, which means you're required to keep looping the process, never activating any mods. I've searched everywhere possible for an answer, and hundreds of people are having this problem, but none have found a solution. Any ideas in here?
guys i need help, everytime i open the door or i kick it i start to get lag spikes and everytime i enter a room i see objects loading inside and i get multiple lag spikes anyone know how to fix this
#1265771933807546440 theyre working on fixing it
No, it is how Unreal Engine is built by default, they'd have to tweak/make adjustments for it to work in the future.
UE by default requires restart to activate mods? Or something else? I read that RoN uses mods.io for their modding services so I wasn't sure if there would be someway to integrate it better or a work around but thank you
Is there any way to downgrade to the update before dlc?
can anyone tell me why my mods arent activating at all, manual installed, game boots up fine no errors but my mods just like aren't there, just confused
https://www.nexusmods.com/readyornot/mods/3188?tab=description
https://www.nexusmods.com/readyornot/mods/476?tab=description
these are the mods i cant get to work, and also my maps won't activate either
Unreal Engine by default requires a restart to apply yes, modio doesn't have anything to do with that, or otherwise you could manually apply mods mid-game still
Fair enough, makes sense. Its a sad time to be a cloud gaming user, but ty for the info!
They both seem to be up to date, are you putting them in the right place?
yeah you just drop in Paks folder right?
That's what they're saying, try testing the first one in HQ or in a mission


