#💻tech-support
1 messages · Page 65 of 1
I couldn't recommend much still besides a bug report, but if you don't have cosmetics, there's nothing I can do to help you get them back
The new ready or not update has broken multigpu support. it is now using my seconddary gpu instead of my 4080. I have set ready or not to run on my main gpu through the nvidia control panel
The game won't open for me. The intro movie will play but then it would crash to desktop. Help?
What are your specs
thanks 🙏
Game is only playable for me in DX11
You have something else going on then. I have a 5800x3d and 6900xt oc to a stock 6950xt, 32gb ram. Went from 100 fps avg at 1440p max settings with the default upscale (100% res scale) to after the fix it went to 150-160 depending on if i'm recording or not.
why cant i post any images here?
I use dx12 too btw
Ryzen 9 3900X, 3090 Ti, 16Gb ram
What are your specs
What does it say on launch
Nothing
try now
just the intro movie
Hopefully I don't get smacked
What DX version?
thank you
12
What about 11?
OS Name Microsoft Windows 11 Home
Processor 12th Gen Intel(R) Core(TM) i7-12700KF, 3600 Mhz, 12 Core(s), 20 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 0904, 3/29/2023
SMBIOS Version 3.5
BaseBoard Manufacturer ASUSTeK COMPUTER INC.
BaseBoard Product ROG STRIX Z790-H GAMING WIFI
Installed Physical Memory (RAM) 64.0 GB
I had the base game, was working fine
When I did update if broke
13th and 14*th gen intel chips are having hardware issues, check the latest pin
It's funny that even running the game on dx11, the game crashes after a while anyway...
ah ok I haven't tried that map. I just have the regular base game.
at the same time, an error is not generated because it is not present in dxdiag, especially in the event viewer utility
Try lowering your resolution from your max and see what happens, or lowering it from what it already is
I'll try, of course, thanks for the help)
just at least they would have warned in advance about switching to a more modern version of the engine, there would have been time to at least throw out their 2060 and buy 6090 lol))
Hi, everytime i start RoN after the Update it shows this, knows anyone why?
thx :)
Dorms is very intensive for its size, even though it is probably the smallest of the three. Upstairs you'll see why
is there a way to disable the zoom in you get when you ADS now?
Omg this actually worked.. went from getting 40 fps to over 100
The video?
Yes thank you
11 crashes too
Hmmm
@rustic laurel If you can direct people that crash or have non-starting game to the #1265712033295372473 forum it'll be easier to diagnose based on files they cna submit.
I won't be able to keep up with chat here.
my game is saying im in a mission while im in the hq so i cant invite friends and friends cant join does anyone know a fix?
Will do, for issues I can't fix easily at least
is there going to be / any way to get the supporter edition in the near future?
@toxic lava
These too? (delete)
Tell them to try restarting the game and/or go into a mode and back out
Not at this time, it was taken off sale and has not come back, don't think it will
i already tried to do both those and it didnt work
Do not touch those ones, the 0-20
Did not realize they were renamed though
thats unfortunate, the customization items are great.
Are you all on the same build? Check the #s on the top right
so only the mod.io folder then?
wouldnt i still have the option to invite though? i cant even click the invite player button
Yes
I am not sure
Double check the #s just to be safe and then we can go from there
yes our versions are the same
no chance of buying supporter edition directly through a dev or something along those lines?
54936 (july 24 2024)
No it's entirely discontinued.
To be sure, you are on a COOP lobby? Try remaking the lobby in friends or public and see
And check to see if you can invite them from Steams main app through the friend section, if they can join through you, or if they can join from the main menu by clicking on you
dang
can someone help me with something
It is not available in commander mode
where then
Practice mode (singleplayer > practice) and coop
Your antivirus may be blocking the game, allow it in a whitelist or exception or whatever it calls it
i am in a coop lobby and yes my friend was able to join via steam
damn
@tawny atlas I’m havin the same issue. When I start the game it gives the same error
my game just doesnt start, after i click play it does nothing, i cleared all mods and verified game files
What does it say, what are your specs, what dx version
same thing is happening to me
says nothing, i also cant find any logs
What exactly?
gtx 1650, i9700 16gb ram, i tried both dx versions
Make a #1265712033295372473
game crashing on startup
^
well gotta say congrats to being the first game to trigger my overheat
They are looking into issues potentially with 13/14th gen intel chips, I know you have a 12th, but I'll look to see if it relates in anyway.
In the meantime if you can open the game, try lowering your resolution down from max or whatever it is now
im running the game on medium lmao
The issue with intel VID table is not happening on 12th gen at all btw.
As for overheating, whcih I do not see on his picture, they probably didn't play many recent games in general.
Not graphic settings, resolution specifically
Of course it did, glad my video worked for you.
ions ago i popped in here to figure out why my game was not updating ... it took a little bit but the team was able able to isolate it to do with MY SUPPORTERS edition and that i had to remove my supporters pack ... i did that it worked .. now i cant get my supporters pack back ???? any ideas ... pic included to prove i had it well before december 2023
I don't really understand the question
Supporter content and Supporter Alpha branch are 2 independent things.
You do not need Supporter Alpha branch whatsoever.
You should have everything in-game if you are on the most up to date build.
no were on my STEAM can i prove i have the supporters eddition
i spent all yesterday deleting reinstalling etc , update over update
Steam Library > Ready Or Not > Manage DLCs, post screenshot of it
i redid ron more than 3 times yesterday
it shouldnt be hitting my cpu that hard though but ill try that, but honestly i might not risk my rig as a whole until it gets fixed, my temps peaked at 93c running at 1440p, with my 360mm AIO, kinda ridiculous its THAT bad
id have better luck screen sharing
when i got to steam and on my RON , then click to dlc
Yes, the power consumption of Intel CPUs and the heat locality is THAT bad under load.
Why would you thingk it shouldn't use your CPU is more relevant of a quetsion.
setting a fps cap can help with this too to some extent
shows the RON in my library but not the supporters becouse steam pulled the supporters from sales
The word from the devs on 13/14th gen issues is that it is an intel related problem when interacting Unreal Engine. They're gonna try to fix some issues, but it is an intel problem. That's my understanding at least, here's the ref.
https://www.radgametools.com/oodleintel.htm
RAD Game Tools' web page. RAD makes Bink
Video, the Telemetry Performance Visualization System, and Oodle Data Compression - all popular video game middleware.
sorry im pretty smart but i am A TBI surviver retired now disabled im trying ...
The steps in this link should help as well as removing mods and fixing normal crash issues
kaminsky smarter than me
i dont even get to see that dlc tab in my steam
this is litterally the only game i own that has pushed my system into emergency shutoff territory, ive played multiple other games that have pushed more in terms of graphics and framerate that didnt bring my sytem to its knees, i could maybe understand my gpu since that was capped and struggling the most, but its not really a failure on intels part
It's not UE specific at all, it never was, and it's not related to 11th or 12th gen.
Most of the fixes in this article are superceded by respective UEFI updates with Intel Baseline power profiles, which are still not going to fix the issue because these CPUs keep on dying in 125W hardcap enviro.
Also, guess who told Kaminsky about it in the first place 😂
yeah maybe ill just cap to 60 and not try to do 165
i know a early game right now that will kick the pc down further lol
cap at 60-80 via software until you walk around the maps for awhile.
then you can try to slowly up it towards 120
i was doing the final dlc mission, on my like 5th attempt lol. i only was playing for maybe 2 hours total?
Ive started a COMS line in hopes i have a willing person who wants to look at tme case first hand via screen share
yeah nothing is really optimized well these days is it
ah ok the new dlc map. I have not tried that map yet. Try at 60-80 and see if you have the same problems.
Kaminsky (Community Manager)]We have a breakthrough for users on 13th and 14th gen CPUs.
There is a issue between Oodle(the tech we use for compression) + I9 14/13, anyone we can find with that spec just ask to follow this official guide in here
https://www.radgametools.com/oodleintel.htm
RAD Game Tools' web page. RAD makes Bink
Video, the Telemetry Performance Visualization System, and Oodle Data Compression - all popular video game middleware.
Is this your first UE5 game for example ?
People keep on claiming that none of their other 200 games do this and then you look at their Steam library and they played Source engine games, 2D Unity games, GTAV. etc.
Or first DX12 game with shader precomp in general ?
Like I said, that info is largely outdated:
https://www.anandtech.com/show/21389/intel-issues-official-statement-regarding-14th-and-13th-gen-instability-recommends-intel-default-settings
Message Kaminsky about it, I'm just repeating what was sent
switching this key sets me in motion for a relownload that downgrades it and then locks it out
Game doesnt start after buying DLC and updating, tried safe mode, dx11, dx12, verifying files and reinstall, what now?
so obviously thats not the course of action ... my cut copy code doesnt show ingame near the remove io anymore
Select none, update the game, and everything will be fine.
??? not sure i did sold 12 hours high speed corrections and eventually got it to run with out truely knowing what i flipped to do so
What does it say
its NOT fine ... i was told i would be recieving the DLC as part of being one of the early supporters , over a year before it was released
It says nothing, i click play, it waits for sometime and then it offers me play button again, but the game doesnt open
The test branch is out of date, it is not tied to your supporter benefits, you've actually only been harming yourself because that game build is no longer updated.
Just update the game to the most recent build and everything will be there.
ive done a bunch of dx12 games, i cant remember what other ue5 games i own but im sure its a few, i dont really look too much into what engines the games have tbh, but for example i was able to do max settings path traced cyberpunk for hours without any temp warnings, with RON specifically i crash running dx12 all the time so at the time of the overheat i was on dx11 though
case by case , i could quickly show you what i mean
What are your specs?
im not trying to run it threw the old crap ,,, im showing you i was part of that crowd but now all my proof of that is stripped away
Nevermind, cleared mods and savegames and the game opened, thank you for your help either way
hell even twwh3 doesnt bring my rig to its knees, and that game runs like piss
and its asking me to pay for the DLC when i was TOLD i wouldRECIEVE IT as part of what i did pay for prior
not to be rude but are you reading the entire message
im one case who cares right
As instructed, go to your steam DLCs tab and if you own SE, you will see that you own both the DLC and SE. The test branch means nothing, if you aren't on the main build, then you need to opt out of the test branch and update your game
add that to half the ppl that were supporters and tyold they would get this free
your not really listening ..... IM NOT TRYING TO PLAY ON THE OLD CRAP
Hello, My save is gone, all of my unlocks are gone too, this is very sad as I have S ranked a few of the missions
There's nothing that we can really do for this, you can make a #1050535723087958156 but you'll need someone to give you their 100% file to get back, unless you want to replay it
Make a coherent post instead of spamming messages like crazy.
You're not the only one here, it makes everything 10 times harder to follow.
bro can't read
turn off SE alpha to get dlc + new update, all the maps are in the base game and the dlc isn't on the alpha build
Do check if you have any UE5 games, because i do believe you didn't play many if any of them.
That's a shame, could one of my friends give me their save file and I just drop it into Ready or not/Saved/SaveGames?
That or you're looking in commander mode when the maps can only be played in practice/multiplayer
ok , lets see if this is confusing
i bought the early supporters pack 100+ $ Canadian at the time , via steam ... that purchase pack is no longer availible so now it just shows the base game as what i own >>
yet prior i had to pull out and off supporters LONG time ago for my version to UPDATE .... as i said not spamming ,,, was all in line
next we get this update and those SUPPORTERS were told they would get this DLC pack FREE as part of being the EARLY EXTRA SPENDERS .. ??? STILL CONFUSED
Ok, hold on a second
You are not listening, if you go to your Steam DLCs tab for Ready or Not, you will see that you still own SE and the DLC as the DLC was sent out for free to everyone with SE. You are not going to see it on the store page.
From what I understood he has no DLCs under his account 🤔
jump in myu coms line ... ill SCREEN SHARE and show you its not there as directed
Why does mods not work anymore?
Ok, that's the info we needed.
Game updated.
If there's nothing there then you may have a code in your Email that you never activated
ive been saying to jump in ... im not spamming
Do you maybe know when it will possible again?
and i try to do all what i can first . im usually very resorcefull .
Once they get updated.
Tomb raider stuff, the demo for robocop, first descendant, off the top of my head, ill have to google whats actually on the engine, but i havent an issue on those titles specifically, and i have done extended play sessions on those titles.
👍
not trying to be a pain in the but or a grieefer or what ever ... im willing to show some one exactly what i see if they join in to help or attempt or even just to look
Tomb raider is not UE5 and is quite old, robocop demo was I believe on UE4 and the first descendant would be the only one assumign you played the release and not the betas or playtests, they were on UE4.
those might even remember me from eions back
i was the first GUY whos game would not update
Please stop spamming this channel.
ok im leaving thought this was tech support
Weird, i was told they were updated to run ue5, and i meant the most recent tomb raider, rise or whatever it was
at least im only discussin RON issues
Thirsty cpu or bad engine aside, with having one of the better 360mm aios on the market, it shouldnt push my cpu to hit 93c,
Not aware of any TR being UE5, Rise is a 2016 game.
Try to find a game in your library that has shader precompilation step, UE5 or any recent PS5 ports for example.
Let's work on a solution. I am going to review what was said real quick.
Hello guys on my Ready or Not says Corrupt data found please verify ur installation how do i fix this ??
Just a precomp in general? I have a few, the new forza, cod, iirc first descendent had it, but havent played it enough to remember off the top of my head, and thats what just comes to mind, right now, if i dug through what i have been playing im sure i could find them all
The more modern the more shader combinations you'll have to compile, the longer and heavier the compilation process is going to be.
guys when i start the game after the update i get an error: corrupt data, verify installation.... (i can launch it without mods) how can i delete them completely and play as normal?
Yeah it takes forza a handful of minutes, same with cod, not long enough to really notice, just tab out a minute or get some water really, and those litterally came out last year
Or you can do code compile or cinebench multi-thread run to see what your CPU is going to pull in terms of power/heat.
ohh god ty
After new update, the game freeze now every time I play. Even thou I have an old gfx card (GTX 1050i) I could play the game before with no lags. Now there are lags in DirectX 11 and a lot more in DirectX 12. Have tried Epic first. Then the High gfx on both DirectX 11 and 12. And the Map "Vally of the Dolls", but freeze every time.
Id rather dm you stuff than keep flooding this channel if thays cool
I have done cinebench stress tests and on the side i do render in autodesk aswell occasionally and have never had issues. Seeing it peak at about 250watts give or take during the stress test, but still never went above 70
Iirc the highest it did hit was 75
I cant remember entirely right now though, id have to do a quick run when i turn my pc back on
I just updated the game every time I start it says corrupt data found I verified the files cleared mod and save data and even reinstalled and it still comes up
I think this is a issue with steam, likely you would have to contact valve's support since they would have all of the info.
yeah but I already said I did all that and it still doesn't work
If you get that error message, you have broken mods in your game.
does anyone know ehy i only have one mission when i go to the desk?
is there someone with gtx 1060?
you have to finish all mission again
the dlc is greyed out? i tried loading in practice mode and a multiplayer lobby. just can't access the DLC at all. balaclava isn't in the customization section either
Balaclavas only are for Echo characters in multiplayer, and the new maps only work on Practice/Multiplayer modes
read what i just said
i tried in both practice and multiplayer
Commander mode resets levels per save file, and practice mode you only have to do each one time to unlock them
You do not have the updated game files. Opt out of the supporter alpha on steam, then restart steam to get the update
i was never in the supporter alpha to begin with, tried that fix already
42473 is the old version
Look online if you are having an issue with steam pushing updates
You do not
is that not current? i just updated 30 minutes ago
where does it say the build # you gave
Your screenshot is from the last update
But your steam shows the current update, which means to me that you have two versions installed
delete your mod.io folder
how
I have the same problem. Did you loose your skins and tatoos too ?
weird that this has never happened with any other game i've ever had / updated / installed. verifying files and hoping it works
i am having the same issue as ziemba, i bought the DLC, deleted all mods, and verified the files. Still shows the DLC greyed out for me
yeah verifying files did nothing lol. really hope void learns from this one
I hope so too. 7 months for a DLC that broke the game...a bit disapointed
That is not a Void issue, that is entirely between you and Steam.
It is not playable in commander mode
right click on the game on steam - manage - browse local files - delete the mod.io folder
heeey i need someone who would help me with RON, maybe someone had this also. So i wanted to play with my friend (uninstalled all of my mods) and i cant join to him by steam and i cant invite him by game or even steam. DX11, DX12, Safe mod wont help, still same problem as i mentioned.
ah i had no idea lol is it supposed to be like that?
(graphics settings are medium, 1660ti, i3-10gen, 16gb ram if someone want to information)
am I the only one who has lost ALL progress and unlocks after updating?
absolutely fuming
Do you have the DLC activated ?
I can’t see any of the new cosmetic items?
Nope, same for me
Seems so
yeah thats the first thing i checked. i made that mistake before
i was about to ask if you figured the grayed out issue since ive got the same problem rn
If you have the Home Invasion DLC, and your game is updated, and you checked in correct places forthe DLC cintent (note: Somebody said the devs mislabeled some items) the only other thing that comes to my mind would be somewhat corrupted save file.
Are the balclavas out yet?
hey want to know is the home invasion only available when we clear all levels in ready or not?
since the menu is there, but unclickable
Normaly it should be available at any stage, since it has a dedicated slot
It is not playable in commander
It is available in MP mode under the character echo
bump
What does it say
ohh i see that's the issue then, i only play commander mode though
You can play practice mode, it is just commander without traits and stress
Join through steam, the in game buttons are not very function to due some issues
You may have to join on their profile
ye ye and i know but
but my friend can invite me BUT i cant join to his game and i can't invite my friend to my lobby
Oh I see it now. Is that the only new sorta hidden cosmetic?
Just a cosmetic available through that character
is there a way to restore my progress/savegame?
Allow eachother to seen and join games through the join button on the profile. I have not had any issue with that since the update
we have
i see button "join" but i cant join
nothing happens when im press join
and im stuck in menu
(and when im in game lobby i cant invite him, also he cant join me by steam)
I forgot to add (it may be related to this problem) my name in game is DESKTOP-(...), not mine real name from steam
Hello, so I have tried removing the mods and stuff but I still don't have a save file, whenever I add a 100% save and then launch through steam it doesn't do anything. I have also tried launching offline so Steam doesn't back up the blank save from the cloud
Are you both fully online in steam? If your name is DESKTOP, you are not properly coming online, so look into how you can fix that. It may be that you are launching though the exe instead of steam.
Have you tried disabling steam cloud saves for the game?
and maybe it's caused by too long nickname on steam? because previously I had a normal nickname and the same steam settings as now, I haven't changed anything since purchasing the game
and then everything works good
is there any plans to bring home invasion to commander mode?
No, it is intentional
I don't have friends to play *sigh too noob of me
Playing in Practice mode is still playing with bots
Disabling cloud saves seems to be working, thank you
Your previous screenshot did not show the profile joining, this is what I was referring to. If any part of steam shows you as offline (friends list, downloads) etc. then invites and joining will not work properly
and it is as shown in the photo, just a moment, my friend, and i will show you
I agree, but all you can do is leave feedback and hope it changes
is there someone with gtx 1060?
is anyone else getting this issue when they try and launch the game?
I'm getting the same issue
thanks
start without mods
Yep lol
I see. Perhaps you can both close the game and close steam for a bit. Other than that I don't know. As long as your name remains as DESKTOP in game, there is still some issue with connecting through steam services, but I don't know what it could be.
We'll just do it tomorrow because we're a bit tired after the fixing problem, we'll contact you about it but thank you
Anyone found a decent way to boost performance? DX12, Ryzen 5 3600, RTX 2060, 32GB DDR4 (before anyone asks)
just got a crash notification saying 'out of video memory trying to allocate a rendering source, make sure your video card has the required memory' i know next to nothing about computers and im hella confuzzled
Hey is it just me or has anyone else noticed less FPS after today's update?
What CPU do you have
UE5 tanked performance for everyone
I have a slow computer and my FPS has slowed by like 20 FPS
What GPU?
Ahh ok thanks hopefully they fix it
Try this video to see if you can get in-game, but afterwards lower resolution.
https://youtu.be/JwQPKAjEefs
Ready Or Not Updated to Unreal Engine 5 and a lot of the Video Scaling Settings are not Applying Correctly.
I will show you how to boost your fps. This shows how to boost with TSR which is the Default Engine UpScale. I went from around 100fps avg at max settings 1440p to around 150fps avg after the fix.
You have to force the sg.resolutionqua...
thank you
i put all the settings in im trying to load in now
its so strange because just a few hours ago the game was fine
game crashed 👍
Make sure you disabled FSR or DLSS upscale first. Also when you get into the game don't enable them back or touch the screen resolution scale slider or it will disable the fix.
i can't play home invasion in commander mode
is that just me or is it affecting everyone?
It is intended, play practice mode
why?
Just how it is
does anyone else have issues with the new map previews? the floor plans are completely blurry and don’t know why
ok then
i cant get into the game to change the settings
will it ever be added to commander mode
no idea
nevermind
Try hitting alt + enter when you uopen the game
if you need this for later DlssQualitySetting=0
FrameGenerationSetting=0
FSRQualitySetting=0
you can put that in the .ini and save it again, remember to put the file back to read only after you unclick it again.
installed the update, but not seeing weapons etc, is it because im still on the "Alpha Test" branch despite that being updated routinely alongside normal?
I have no mods installed ?
Yes. Opt out of the test branch, it is dead.
That error is caused exclusively by mods
lol ik, has been update as normal usually
The test branch hasn't been updated since Feb
the game is telling me that it failed to open descriptor file ../../../readyornot.uproject
You would've missed the march update completely
Verify the game files
how do i do that?
If I click on "Delete Mod Data," will that only remove the mods and make it work? Maybe?
Follow the steps in #❓modding-faq-archive
Right click the game, go to properties, files, and hit verify
alr ty
i changed all the settings and its still crashing. im abt to just reinstall
Sinner doing overtime, anyway I saw this mentioned earlier, I've purchased the home invasion DLC and yet I cant seem to access the maps included in that. I've fully reinstalled the game, verified integrity etc and the issue persists. Does anyone have a fix for that?
They are not playable in commander mode
Oh, yeah I'm seeing the steam reviews that its exclusively multiplayer mb thanks for the help :)
Okay that seems to work but damn the fps was messed up
That is false, it is playable in the practice mode which is singleplayer, just not commander mode.
im reinstalling it and im not able to fucking find the vairfy in the propertys
Ah ok thanks for your help I'm glad its playable solo
ig not
Yes
Since this last update it broke the game it crashes with the 4090 vram memory
thanks im a noob when it comes to this
What is your cpu
intel 14700kf
I have gtx 1080 and this new update has made the game unplayable, can't get above 25 fps
Read the first pin
which pin but I didn't understand well I'm Spanish I'm translating
happened to me too i deadass cant play the game
ok now i saw it thanks
Anyone having trouble joining friends? I've lost connection to host every time so far but I can load into single player
I don't think it's my internet at the moment because it's only RoN having trouble
Updating some information that I just resolved by disabling Intel's apo technology now seems to work. since the fault is not in the power since it is limited to a safe range. but it is also partly the fault of the patch that has caused changes that have not been tested before launch and has to take part of the blame since they must work together with intel and amd so that these changes do not affect anything other than what is typical today in day. It is the user who eats the problem, we are the test bunnies
Use this fix here and put resolution scale slider down to 50. Read the bottom of the first post on the sticky. https://steamcommunity.com/app/1144200/discussions/0/4515505814156131770/
ok jrm. Will also try that with my older gtx 1050i card.
Sadly the game were running fine without lags in High gfx settings before the update.
It has helped hundreds of people already and counting.
Not sure if they made the textures larger in this new update. Or what is causing it.
updated from ue4 to unreal engine 5. It's more demanding engine.
ok... yes I see. Were also started to use Unreal some months ago. Just a small test, if I could work with the software, and perhaps one day make my own game. But my computer were sweating while running Unreal.
is it normal that every single mod is corupted
Hello. I've had a bit of an odd problem with Ready or Not for a while and I've mot seem anybody else having this issue. Ever since 1.0, the game will only launch in DX11 for me; attempting to launch it in DX12 or safe mode will result in an immediate crash. The update to Unreal 5 has done nothing to fix this issue. My system has a 12gb RTX 3060 and Ryzen 5 3600. It has no trouble with DX12 on any other game. I have installed and reinstalled, validated files, deleted and reinstalled the PAK folders, all with no luck. As I said above, I have not seen anybody else anywhere on the Internet talking about this issue and while it isn't a huge deal, it is a little strange.
Yes, delete them all until they are updated
To go back to this, alpha branch had the option to change my character and his voice, now that i opt out, i have the guns etc, but no option to swap characters
BTW, beside the lag and freeze problem I now will try to solve by NURFing down the resolution, there were also a problem now when I wanted civilians or suspects to move towards me. Often it seemed that they were now moving away from me instead.
You cannot change the character in commander or practice, it's been that way for forever, but you can in commander
Its no different than putting dlss or fsr to quality mode. The fix in the sticky / video on steam that is how the default UE5 upscale works. Putting it to 67 is technically the same as putting DLSS or FSR to Quality mode when they are working properly.
Hi. When i open the game all is the Splash screen. No movies/intros. Any suggestions?
Plus it could be nice to have chat to work in all the modes. Even on single mode plus multiplayer with friend. Using the Tablet in order to write something, takes time, and are risky if you are not in a closet, or somehow in clover. Like many others gamers, I like to write a few commentaries on my youtube channel, instead of using mic with voice.
Gabe: I also had a black screen for a very long time. Loading times are much longer now, before the game starts.
put the resolution scale slider down to 50 for a gtx 1050
ok. Thanks.
Ok so my understanding is that the DLSS and FSR aren’t working properly right now that we have to do this? Or is this for systems that don’t use those? Why would we use this over DLSS is what I’m wondering.
Will BTW buy (hopefully) a new m.2 next month that will lower the new extra long loading times.
Yeah on FSR quality barley does anything at the moment. Anything beyond quality setting makes 0 change.
DLSS too? I see, I was confused why people were suggesting this, now I understand, thank you.
If your system is capable of DLSS quality and get 150+ fps then by all means use dlss
I have heard anything under DLSS Q is the same as the FSR.
Yeah that sounds about right, I can use DLSS with my system, but I feel it is as you say, it doesn’t work that well. I get around 90 frames max inside maps
hello, could someone help me, I can't install the latest update in Ready or Not and I can't see the purchased DLC in the game, can anyone help?
what is your setup
It’s on the older side nowadays, but i7 10700k and 3070, it worked fine before update but now my frames are all over the place, I could be staring at a wall and it drops To 60 or less
yes definitely for you do the fix in the video. Experiment with sg.ResolutionQuality=50 then you can up your way up to 60 if you want
Hey so I'm very new to PC gaming and I just wanna know if someone could help me figure out if my pc can run ready or not before I buy it
it's at top left in mission select thing at the table
Ok I will do that and see how it goes, since if had couple of crashes since the update too, never before. So I’m guessing there is something with shaders or textures or caching that is too demanding on all systems
I don't see it anywhere, not even the new weapons
can't seems to join any multiplayer game
"unable to find server with acceptable ping"
This has only happened to me after the update
Are you on version 54936, shown in the top right of the screen
Be more specific with the issue
I mean. There are other people where they show the Intro when they open the game. Mine just opens and straight into the menu, no intro no nothing.
I dont care about the intro but looks nice 😭
Is there any way to change the gamma settings ? I often find the blacks are horribly washed out.
Check to see if you have any command line arguements on the steam launch options. If you do not, then verify your game files
@umbral juniper
Oh nevermind i am ducking dumb
Skip intro arguement?
That why they showed me the error "Serialization Error: Action Needed
Corrupt data found, please verify your installation"
I have the supporter pack so I got the new DLC for free. Steam says the new DLC is in my library. However, I can’t see it and it’s not showing. What course of action can I take to rectify this issue?
#💻tech-support message If you are getting the error, you shouldn't be able to get into the game. I am confused at what your situation is
Are you on version 54936 shown in the top right?
Already did that. Its working now.
I believe so. I’ll check again when I get home.
Ayoo i went to play and it said "corrupt data found, verify installation" lol tf
Uninstall mods. Do people not read?
Could I get some help when available
I just got on here chill out lol why are you so hostile on discord?
With what
so I'm very new to PC gaming and I just wanna know if someone could help me figure out if my pc can run ready or not before I buy it
Since the update i was able to load in one time but since then I keep crashing while launching practice or multiplayer. All my mods are deleted, checked my drivers for updates but nothing has worked. Launched in safe mode and still nothing.
Try lowering your resolution in-game
If you go to system requirements lab, and choose ready or not, you can get a quick reading on whether you meet the minimum and recommended requirements. It scans your hardware and lets you know
Where's that at?
Even at Low gfx settings, and 50% resolution, the game after update, still freeze.
I know I have an old gfx card (GTX 1050i). But were able to run on High before update.
I have a gtx 1060 and AMD FX 6300
Does the "Bounce Light" setting in the advanced gfx setting require a lot of GFX muscles?
Did it give you the green tick on recommended settings?
I didn't get that far it tried getting me to download something
Yeah that's the point. It downloads a tiny file to scan your hardware. It needs to do that
To give an assessment
Mb I'm not good at computers I gotta watch videos do mod lspdfr bc I don't wanna mess stuff up
Its a one second download, then you open it from your browser and it loads an assessment for you
From your browser downloads I should say
Would it be worth 90 bucks for a AMD Ryzen 5 5500
That's all it says is my cpu is slow
Have you verified game files yet? a slow CPU shouldn't prevent you from loading into the game.
are the fps better now?
Looks like it just about passes minimum settings. 5500 would be a noticeable improvement but check if your motherboard socket is compatible with that cpu
( sorry was trying to reply to another issue)
Same here
Again I'm sorry don't know anything about computers should I open my case and see what it looks like?
Nah no need. Can find it with a quick search
I dont know what motherboard I have lol my dad gave me the pc
Your CPU uses the AM3+ socket
The 5500 uses the AM4 socket so you wouldn't be able to upgrade without changing the motherboard
I'm guessing that would be a lot
If you wanted to upgrade, google a list of all the AM3+ CPUs. Look at their CPU mark scores on cpubenchmark.net . Find the one with the highest score you can afford
But it's a very old socket. You'd probably have to buy used on eBay or something
I'm not sure it would be worth it because ready or nots new engine upgrade is demanding. If you look at discord everyone is talking about how their performance is slower since the update, including me. AM3+ socket is so old it mightn't be able to handle such a modern engine
Yeah I'm looking at motherboards rn any then you'd recommend that's not insanely expensive
ASUS Prime B450M-A II AMD AM4 is what im looking at rn
I'm not too up on them at the moment. I only research them when I buy them myself, which is not often.
level 5 i keep dying walking through doors, can someone help?
Lots of helpful YouTube channels, this guy is good
Watch lots of those kind of videos
Thattt'ss... agency?...
Are you getting shot or you just instant die
insa death
Heeey. Can i downgrade the game in what way?
instant
Take a video
You can use the test branch to go back to feb, but that build is not fun either.
idek how to capture my screen
Use OBS, it's free
how do u fix corrupted save file, please verify game installation
I'd imagine you can't play multiplayer with people using the current build?
okay, thx. My fps is so bad after the 1.2
If you mean the test build, yes actually, but they also have to be on that build
Oh wait I misread what you said
Yes they would not be able to play with anyone not also on that build
wait so how do I verify my game?
Yeah that's what I mean. I'd be tempted to roll back cos my performance was great on the last build
this feels like if I’m about to defuse a bomb
Game properties on steam, right click the game > manage > installed files or one of those
I would imagine only aboutt.. 5 people are maybe playing that build knowingly right now, but that build still has plenty of issues optimization and AI wise.
I think so, unless some modders updated already. Gunfighter is apparently updated to some extent
The steps are very specific
The update broke it, yes
i just replayed the mission and tried to save gameplay but it dosent save
it sounds like a grenade is going of but as soon as i press to peek the door its an insta death
Game wont load after new update. Serialization data found. Even after integrity check...
so I just delete all of mods manually though the folder or do I just delete the mod.io folder, I’m not replaying the entire game with those missions that are just a pain. so I’m making sure that I do this right
well crap
hello. is it just me or i cant change the resolution scale to the desired amount i wanted? i have very mid laptop. without changing the resolution scale, the game is unplayable. please help
Wait
Is the map a lethal obsession
Known big
Bug*
Deleting the mods should not delete your save
If it does it is cause of another issue
well too late I’ve already verified my files.
hello i need help when i look at my team i have 30 fps drops
pc spec
gtx 1060 6gb
cpu i5 13400f
ram 32gb
Sorry, I’m in the same boat. It’s been that way since 1.0, I’m afraid
i didn't played it from then but now i wanted to see if the game got better optimalization with the ue5 it goes on 60 fps in lobby and in map around 50-45 whitchi s not that bad on this game but everytime when i look at them i have around 30 to 20 fps sometimes 15
maybe its becouse of the very realistic shadows in the vests or i just need better graphic asap
Can't seem to find the new maps on the level selection in Commander Mode. Only seems to be available in practice mode?
Practice and multiplayer, yes
Is there a way to get acheivements for the new maps in single player?
Practice mode
Oh I didn't know practice mode had acheivements! Thanks! 😄
did they get patch for fps?
Friday at the earliest according to @odd trail
They are coming out with a patch by friday like said. In the mean time I have a Performance fix you can use in the mean time that is stickied on the steam forums. It definitely 100% works.
Can you link it?
oh ok i didn't know
Naw, yer' good
I know an easy fix for all this, but there are many methods
This will get them by for now until you guys do your awesome update
Does clearing mods and save data also remove all cosmetic unlocks and story progress?
Yes
well shit
To remove mods, look at #❓modding-faq-archive
tryna enable DLSS frame gen, but it says I need an RTX GPU (I use a laptop RTX 3050 TI)
Dlss frame gen by default is only for rtx 4000 gpus. There are mods that can swap dlss fg to FSR3 FG, etc though.
Anyone know how to play the last version, I cant even handle the stress trying to find a solution to fix the issues
#💬general-discussion message try this until the next patch
thx
fps drops when looking at the ai
if they doesn't have fullgear i have around 40 fps but when they have fullgear 30-25 fps dropp and fsr doesn't help still have the same fps
what kind of cpu do you have?
intel i5 13400f
i followed the ping that one admin or who was he pinged it, boosted the fps a little bit but only by 5 fps
Another bug found is joining with a friend online has failed since this last update, before this update there was no such bug
This is a game killer for me
Before this update my game was pretty much buttery smooth
same i have to play alone to get normal frame rate
https://www.youtube.com/watch?v=JwQPKAjEefs&ab_channel=Jrminate this is the video I used to get some frames back (idk if this is the one the admin pinged) but apparently that happens to me too while being in gas station and it keeps crashing too.
i had before update 100 fps
and I only had a GTX1650 with a 4C 8T CPU on med-high settings 1080p
i have gtx 1060 6gb
and i even played on epic with 70 fps
UE5 doesnt like older GPU
unreal engine doesnt like old and down to shit grade cpu's gpu's
Yeah FSR is pretty important to me
All we can do is wait for friday
same
really help poor people like us 😂
fr i hope they will make fsr work if yes all performence bugs could be fixed with that
Sadly a 1650 is the only affordable choice in a third world country like me
I prefer the old update before the resent one
RTX GPU? those will cost 5x more here
brother all I need is a new cpu and then I want to work were there is mods can be optimized for low performance pc's
I cant test or work cause I got shit cpu
idk my brother will buy new gpu soon and i will get hes rtx 3070 8gb so im happy
What CPU u got? i have a i5-10300h
Oh man those gonna be a game changer
I got G6400 basically I got a old pc that im upgrading
u can say goodbye to fsr and welcome dlss
i hope its not broken bcs he doesn't have fans
AMD on top for gpu memory
so hes gpu is going 70 celsius
That's kinda okay actually
idk my gpu is going on 40 celsius max bcs i have 4 fans
I got two cause im not gay
if its below 80C it will be fine
my cpu*is a work horse
i have my gpu for 7 years and its still banger (sometimes)
that's a stone age CPU by today standard
yea 😦
Let's hope the friday patch will address FPS issue and Unreal Jesus will bless us with higher FPS
I plan to get a new mother board and cpu to upgrade to like a better cpu
Unreal Engine = Performance Roulette
if fsr will be added instantly +50 fps
the mine is good and affortable is i5 13400f it blessed my games with 30 more fps
Yeah your current CPU is pretty much useless, also get an AMD GPU, games now more becoming VRAM hungry. Trust me you want those VRAM
yea but I need to buy a cpu compatible with LGA 1200 😢
the cpu is for 200,92 $
Why not ryzen?
amd has a different slot type
That's a much better value these days
Arent you gonna buy a new mobo?
im getting an serialization error when launching after the update with the dlc
yea but thats like $300-400 +
Lanuch the game in safe mode
Delete or remove old mods
ok so no dx12? 😦
constant crashes
you can run it on both but may crash
gotcha
if you have shitty pc intagrated gpu will help you @slate jacinth
ty for the help!
i updated and bought the new dlc, my customizations and progress is all gone
Oh man, money's tight eh? if you really must have an LGA 1200, the i3-10105F is a really good value
anyway to get my old save data back or am i SOL?
Or go with the i5-10400f
getting intagrated gpu is more affortable
yea, but I got a good gpu to handle most of the games
game say files corrupted what do
but sill can give you good performace at games
Launch in safe mode
delete mods
done did
check youre varierity of files or delete mods
What GPU u got?
AMD RX6650XT
not bad one
the i5 is more than enough
I got it for 220 when it was supposed to be like 40-45 bucks more
I really cant recommend 4 cores in 2024
Refer to the pinned message about it. If you launch in safe mode and it works, then you still have a mod being loaded into the game.
i think that if you want to upgrade cpu upgrade the gpu too
Hello good evening I would like to report that the game is very bad fps after the last update, also every time we restart a mission it cracks. also my friends can't join me... I hope they fix it quickly
unless your budget is really tight
ik only thing you can do now is to wait till friday and pray that they will fix fsr
Yeah welcome to the club
rn i have around 50-30 fps too
wait friday brother, all will be fixed by the gods, void interactives
i updated and bought the new dlc, my customizations and progress is all gone even redowloaded the game
anyway to get my old save data / stuff back or am i SOL?
ur SOL
probably up to $160's and i'll be fine until I get a new pc
youre DONE.
god dammit man i had like everything 2
my hawiian shirt :((((
its $100 right now
download unlock everything mod i can send you link in pm
you need new mod for it now bcs of the ue5 update
yea but socket type
ha ha ha ha ha ha
ur LGA 1200 right?
yea
yep will fit
Guys I found the solution, we are going to buy all the 5090 and everything will be solved hahahaha
oh perfect
This is a joke. It can't be that they update and the game breaks
it is that update
I lost my S rank on Sins, which makes me really pissed
They done fuck it up, man.
yooozaaa i dont have the supporter edtion, when i go to buy the dlc it says this.
also when i go to the menu selection it has "home invasion" however i cannot select it nor buy it from steam? anyone know what i can do
i lost all my S ranks im crying man
did you delete you save files?
Are you playing commander mode?
nah, never played with mods i just downloaded the update + dlc and my shit gone
just single player mode i think? what is commander mode?
Home invasion is only available in Practice mode
wow, we should clap void interactive
il suss now
wish i could recover my cloud files from steam cloud but it doesnt seem to be possible
commander mode is single player, you control AI
pls reenable basic gamepad support ill map it myself
gotchu, im sussing now
Got it thanks man!!! @slate jacinth
my guy
C:\Users(Username)\AppData\Local\ReadyOrNot\Saved\SaveGames Is there anything in there?
It's not folder you need, all saves locates in appdata
these but im pretty sure they aint the old ones
Did you select clean mods and save data when launching or nothang?
Damn bro, you got robbed by void interactives
😭
they done stole your save files
Does anyone know how th fix the problem of when I load into a game after the new update it hits 100% and then my computer completely shuts off. I varified all my game files, updated my drivers, and put it on the lowest graphics. I have preivously played the game on epic grpahics and my computer used to run it great
Hotfix coming friday. That's all that can be said.
is this an issue other people are having?
Crashing your computer certainly isn't a normal effect, it suggests a greater issue with your PC.
What are your specs
RTX 2070 super, 32 gb of ram, ryzen 9 AMD
and it is on an ssd
anyone having issues playing multiplayer? i keep getting told i cant find a lobby with low enough ping or i cannot connect to hosty
Try making a #1265712033295372473 and Arc will help when he can, he's smarter when it comes to that compared to me, I would imagine either a power/heating issue. But I can't say for sure.
You didn't download any mods did you
Okay thank you very much
and no I did not
check dms ben shapiro
Howdy!
I was pointed in this direction.
Im having an issue getting the game to work after loading 100% into any single player or multiplayer game. Once it hits 100% in the loading screen it just freezes.
This is what I posted in the general chat before i was directed here. Are you able to assist?
I tried resetting my setting in the game, no luck
i updated my drivers, No luck
I went online and saw that is would be the mods and deleted all my mods, no luck
I went through the pak files and deleted each one, validated the files and had it reinstall the missing files, no luck.
Completely delete every file and uninstall, and reinstall, no luck.
now I lost all my progress and are not able to play the game.
(PS I am a smooth brain and spent 5 hours straight on this so far)
Adding to this, I have to wake up in a few hours, so I am going offline. I'll check back tomorrow!
Thank you!
Have a nice day bro!
After this update came out I started running like 5-15 fps when originally I was running way higher
Is the DLC ever going to be in commander mode
I have all the levels "s" with the exception of the new DLC. and did not get the achievement, is there a bug? Also the incapacitate a suspect one
Hi, tank you so much, issue resolved
Anybody know why the game crashes with the RiverTuna overlay on?
How do you acces the Home invasion mission? I see the tab in the missions select, but its grayed out, I own the dlc, and this is the save file with all missions on s rank, Do i have to complete port again? is it a bug?
The new maps are only playable in Practice and Multiplayer modes
Heyo, I've been a long time player of the game and just came back for the home invasion expansion, however I keep getting greeted by this corrupt data popup every time I launch the game in anything other than safe mode. I'm sure this is related to mods, however I have uninstalled all of them both in game, and through the mods folder itself
Also, I've tried verifiying my files on top of deleting my mods, this didn't work either
Have you tried all of these steps, in order?
#❓modding-faq-archive message
#❓modding-faq-archive message
There's one bit I missed, lemme give it a try rq
clearing the mod.io cache worked perfectly, tysm!
Happy to help
Yo does anyone know how to fix whenever you launch direct x12 it says you need to validate youre game files.
Refer to the pinned message about it
Where is that at? Is it this one?
Oh ok thank you, sorry!
I swear I don't understand the reason yet... I lowered the scaling to 67, added the startup files to exceptions just in case, also threw them into the high-voltage operation of the video chip.... It doesn't help a damn.
There is a known bug where you can't lower scaling, at least not in-game
yes, I changed the software in the ini itself... Everything is fine. FPS has increased. But the flights did not stop
they just happen at a random moment. That is, there may not even be effects on the screen.
and the crash timings don't match
in short, we will look further...
im sure other people are having this problem but when i open up RoN and i try to go into HQ weather it be prac or story or commander it crashes. ive scanned files and everything says its fine and ive removed all the mods. it only started happening after the new update. ill try to uninstall and reinstall if that doesnt work i wont be able to mag dump innocent civis
when updating it says "disk write error" anyone know a fix
That is a steam error, I recommend googling it since it has multiple causes
Guys how do I change res scale pls help
What does it say
You can't, that is a known bug atm
But I saw a yt vid and he change it thru game files
no error message or anything i just open hq and it crashes
The problem is that I can’t find gameusersettings.ini
im reinstalling rn so i can see if this works should be done in 15min
The video should explain how to get it, or verify and see if it pops up
Yea it explains but I don’t have it 💀 I only have normal gameusersettings
That should be the correct one, .ini is just the formatting, the name (normally) won't say gameusersettings.ini
Oh ok well I did it but it still doesn’t work he says it works only with tsr and idk what it is and I don’t have it on rtx I think
And another problem I have is that I can’t see fps even tho I have them turned on
from my experience the stuck at 100% thing only happens on dx12, but it works on dx11
DX12 has longer and more intensive load times due to PSO caching, it loads the map before you play so it doesn't stutter as much while you play.
Really?
yeah it doesnt load on dx12 for me, but it works on 11
DX11 doesn't have PSO due to it being for older GPUs which don't support it, but as a result you will stutter more
Well I will try it cause it really annoys me that it’s stuck on 100%
help pls
What am I missing - have supporter edition, says Home Invasion DLC is in library - but when I launch, not seeing any of the DLC content (maps or weapons) - I have no Mods running - done a complete uninstall and delete, still nothing in MP or Practice
What game version in right upper corner you have?
Create a thread in #1265712033295372473 and provide more details about the crash.
Also submit there your crash log from %LOCALAPPDATA%\ReadyOrNot\Saved\Crashes
V42473 - only launch option in Steam is "Ready or Not [supporteralpha}
Opt out of supporter alpha
dumb question - how please?
The same way you opted in but in reverse 
In Steam Library > Ready Or Not > Properties > Betas > NONE
I couldnt remember that far back 😉 - thanks for the assist - its updating now
I wish I could select previous game version from game Properties… Previous engine was much more stable for me.
When I try to load in station I’m stuck in loading screen and the game is not responding
You can. Look up how to downpatch steam games.
In my case, switching to DirectX 11 solved this
What about auto updates in such case?
Yea well I wanna play on dx 12 I was playing on it the whole time without problems
Launching the game from the exe or changing the steam file mitigates this. Look it up, but you won't get support for it here.
Also when I’m in multiplayer and try to switch the voice it’s stuck at judges voice even tho I changed it
I will check this out, thanks 😄
You cant change it if you host
😂😭😭
Join some lobby and it's will work
That’s sad
So any reason why no matter if i turn dlss to performance, ultra performance, quality, turn the graphics settings to epic or low, my fps is always 80? i used to run 120 before the update
fuckin game doesnt even work on safe mode. i load into pd and it freezes in balckscreen. it didnt happend yestrday. also they did sum secrete updates on steam db i saw so idk lol
In your case, this solution may help: https://youtu. be/JwQPKAjEefs?feature=shared
It describes how to change resolution scaling that is currently not working in game setting
More tips were mentioned on Steam discussion
this is unnacceptable
😭 😭 no way
I also heard that it is recommended to completely uninstall game, then download it clean with latest update
thats tragic but u lucky u can launch the game. i cant even launch it on dx 12 but i could yestrday. also they did sum 2 secret updates or sum shit lol
i dont use resoluation scaling
But it helps because UE5 does it by default. This solution comes from a person that works with Unreal Engine. It really helps.
Then you can disable or enable DLSS if you want (it may sometimes improve CPU usage like in my case)
turning on dlss doesnt help at all
Yes because it is related to scaling which is not working currently. So you can define % of resolution scale (forced by UE5) in game’s .ini file.
what am i running this game at? 200%? cuz i always run games at 100% unless the number is messed up
When I opened .ini file, it was like 110% scale set here. By default… which is crazy 😄
Hey, I updatet the game yesterday and wanted to play it now. But since I update it, it shows "Corrupt game files". What can I do?
Remove mods I guess
Well where? I downloaded them ingame?
doesnt even show up
Thanks
You can try to add this command manually. Then save and set .ini file as „Read Only”
Hello, is there any way to adjust the contrast/gamma correction setting in the game ? I'm playing on an OLED screen and I find the black levels atrocious
Hey I removed all my mods but it still says corrupt files, so then I verified integrity, but it STILL says corrupt files. I can only launch it on safe mode and barely be getting 30 fps, I used to get 80.... idk what to do anymore
dx11 + 100% res scaling
It looks better 😄
With the new Home Invasion DLC releasing, if I joined a MP Session with some people and I didn't have the DLC, can I still join or do I need the DLC to join the hosts MP session?
Probably there are still some mods files somewhere… check all the folders related to RoN (especially in AppData/Local) and remove them
Did you delete the files from the Mod.io files?
#❓modding-faq-archive message
If that doesn’t work, go done the list here #❓modding-faq-archive message
Won’t help with the fps, though
I keep getting disconnected from lobbies
before the update i got atleast 50 fps ingame but now i cant even get above 10 in main menu
yea me too
fr?
For some reason I cant access the new maps. I have the new guns but no maps. I have supporter edition.
hi, why my game stuck in black screen when i launch?
and then it crashed
Any error message ?
Maps are only available in Practice and Multiplayer mode via their own separate list.
They are NOT present in Commander mode.
no
Check if your antivirus is not blocking game files, otherwise create a thread in #1265712033295372473 and ping me there.
im now verifying the game
ok, i will check it
Only Host needs to have the DLC for the entire lobby to be able to play those maps.
You can join and play them without it, you cannot host your own lobby on those maps.
i added the game folder to the exclusions, now i will try launch the game
still not working. im creating a thread
Hello, why did it say that i need an RTX GPU ? I have an RTX 3060
RTX3000 does NOT support DLSS-FG.
For that you would need RTX4000
thks
now the game working, i deleted a mod map and it solved the problem.
before update i had like 120 fps and now i got 40
OpTiMiZaTioN
Same for me
ALright.
they fucked something up which tanked the DLC reviews lol
They did 2 secret updates according to steamDB and now all of the sudden I’m reaching 80+fps lol
What is better between DirectX 11 and 12 ?
Dx 11 ig
i keep getting this message even after steam validates the game and i reinstalled it
Remove ALL your mods.
you'd better check the paks folder mannually
Well if you only used the steam uninstall button and didn't go into your files and manually delete the game than mods wouldn't get removed via steam's uninstall since it only uninstalls the game files not mods.
found the problem my plug ins folder somehow ended up in another game
Game crashes after i start a new game on 100% loading into police station. Installation verifyed via Steam. What can it be?
be4 new update everything was ok
Yesterday when I was on streamer mission and my swat AI fired in the last room, it froze twice. When I was playing the new DLC mission (Dorms) by myself and I fired from my stinger launcher on an AI who was rushing towards me with a knife and my game again, froze.
I am forced to shut this game down and start it all over again. This however never happened over the hours I played with my friends. It happens when I play alone or with swat AI.
I verified my game files right after the update, however I will try it again just in case.
same thing has been happening to me all day and i cant play the game
i went into the .ini file and changed the resolutionquality to 67 but i still cant get into a game it just crashes
ive lowered the res quality and the resolution itself and nothing works
The game does not start after the release of the update on 07/23/2024. I tried to reinstall, check files and all to no avail. I also launched the save mod, as well as the cleaning of mods and data.
Now I already see the error 0x0000142.
Remove your DLL/DXGI mods (ReShade).
revert this fucking update
I don't have Reshade, sort of...
Clear contents of ".\Steamapps\Common\Ready Or Not\ReadyOrNot\Binaries\Win64", then verify game files in Steam.
yes, I don't have Reshade
ok
Thank you very much, now everything has worked!
Is it any better yet ? U guys still having bad performance?
Did anyone find a way to improve performance? I tried the pinned post, changing DX, setting game to low and DLSS toultra performance. Nothing worked for me.
i cant change my resoluation scaling pls help
thx
Yes
Will many of the game's buggy issues be resolved
old bugs or the ones that came out with the new update ?
im on lowest graphics and most maps are fine but carriers of the vine is 20 fps is this normal
ohhhhhh but it took her a second to even register going down
so i assumed it wasnt that at first
yes, that how bleed out working
it's wont kill in 1 sec
got ya
Hey guys when i download mods for the new update i get this message (See picture). How do i fix this?
when im trying to get in game with the mods
i suggest deleted your mods folder
Outdated mods, remove them
i just downloaded the newest verions
that helped me before the update, you have to do it from your game directory
Like the paks folder?
ai
so go to your game directory
go to
Ready or not > content > paks > mod.io > then delete the folder with the numbers
Why is my gpu 20-30% but gpu memory 100% and game stuttering / fps dropping?
gpu is a 2080 with 8gb
I also tried to low settings to minimum and resolution to the lowest possible, same problem
this is my paks folder, no other folders just .PAKS files
Anything beyond pakchunk 20 is a mod
Why is it grayed out?
Do I have to pass all the base game to unlock it?
you dont have the DLC i think
Only in Practice and Multiplayer
Oh, thank you
heyyy, ive randomely got this error....
oh that is strange, normally there is a folder there
and ron doesnt boot up
Your mods are broken after the update, remove them.
no mods for me?
Yea
and how long?
I got the same i jsut downloaded the newest verions
I dont know, Maybe ask the developers they wil know
im starting it in save mode
I just cleared my game and its working for me
Depends on each individual mod and whether they are updated or not
but how do i update them if ive used the ingame mod manager
so ill just delete everything in the pak folder?
Don't delete the pakchunk 1 to 20 ones
All the rest that are actual mods, yeah
ok done it
damn, this game after the update is unplayable at least for me
and its a sad thing to say, cause I love the game and the idea
but when I could play without any issues before the update, now game stutters so much, even when i tried to fix its it still bad
maybe there will be a hotfix...or something...
everyone has this problem , we just gotta wait to see what happens
my games now looks like ultra bright wtf like it looks like you put max luminosity on setting
Gotta play the game a bunch and play every map to compile all shaders in order for stuttering to be alleviated.
It's the same thing every update, same thing every time you reinstall.
Except now that it's UE5 the compilation issues are exaggerated.
Especially since it's not shipping UE 5.4, which substantially increased both overall performance, and improved shader compilation times.
Did it help?
hey, I cant Play the home invasion Dlc. I cant even select it. It looks licke this
SWAT AI still get stuck and still is stupid.
i even bought the dlc
I'm having a issue with some mods not allowing the game to run and saying Corrupt data found, please verify your installation. I've already tried uninstalling and reinstalling, I've checked my mods to the best of my ability and found nothing, i updated all the mods but i still get the error whenever i activate certain mods
you can play it only in practice or multiplayer
try removing entirely the mods
When you say updated... unless they've been updated in the last two days they aren't going to work
when i deactivate all my mods its fine and when i active gunfighter and better visuals its fine but when i tried better red dot, astrals ai revamp, and general quality of life fixes it doesn't open
yep
Gunfighter is one that has been updated. Check Nexus mods, it shows the date each mod has been updated, if it's not in the last day or two, it probably won't work and you shouldn't use those particular mods
yah i just checked the ai mod needs another update and the general fixes needs one too but i also have
in game menu and blue print loader which was updated yesterday but that doesn't work either
scratch that, just tried it launched 🙃
https://youtu.be/JwQPKAjEefs This works. This raised fps to normal when dropped resolution scaling. 
I think if anyone is having problems in game it’s because you have mods previously in your game files before installing the update and it’s corrupted some folders. Best thing I can recommend for now which sucks is either deleting your mod folder and trying or doing a fresh reinstall of the game and see if that works. The mod manager in game hasn’t always been the best for not breaking your game to begin with so that’s all I can really recommend, because my game runs perfectly fine with the new update and i don’t have a single mod installed.
Does it ultimately freezes your whole game, rendering it unplayable? If so this is a bug that will be fix (I hope so) tomorrow
My game is laggy as hell and stutters... ran mouch better before, the update crashed everything
Yea, use this link for gain some of your performance back https://youtu.be/JwQPKAjEefs
Can someone help me? This pops up when gthe game starts up I already deleed my actual mods and validated the game.
remove the mods
Already did.
verify game
also the mod io folder?
I did that.
mod io?
does the paks stay from 1 - 20
Yea i deleted the rest of the mods
its the mods folder in the paks
I need to delete this whole folder?
yea
Alright
0-20, just for clarification
its useless at this point
yeah so i fucked around with the game settings.ini file and it increased my fps drastically, but still the same shit game freezes when explosions go off or gunfights
It works thanks!
i checked my cpu usage and it isnt even 100%
Yea, its been a problem since the update, I think they'll fix it on friday
it ultimately unplayable untill the next patch
Delete all mod data include mod.io folder. If this doesn't help, try run game in safe mode, then in normal mode (dx11-12)
they better man i held off on buying the home invasion dlc till they fix it
same
The game works.
just make sure to use mods from nexus and is 1.1 version
eaven the beta worked better
alright thanks.
bro ima use that instead and what version is the beta
The updated attachment mod from ballistic doesnt work for me... its in my mod folder but the attachments dont show up
before 1.0 im guessing
Yea some of the mods dont work, I tested out gunfighter, in-game menu, nvg always on, and they somewhat dont work
NVGs work, just gunfighter and attachment doesnt work
gunfighter does work but it doesnt make other mods work
Yeah, i dont even see 9bangers
remove real gun names
i already tried, changes nothing
what mods you got on?