#š»tech-support
1 messages Ā· Page 63 of 1
Also send me your crash log above
yes
It is not available there.
Will do, I need a few minutes
ohh okay i underthand thank you
just forget it guys, until the patch is released from our side, we will have almost no way to influence the problems.
you can safely delete the game and download SWAT 4, even though there is no this amazing newfangled UE5 that does not work....
Okay this makes no sense, but I hope it helps others.
I lowered my resolution down to 1440p and... now I can max the game out at Epic settings, resolution scale set to 150%, motion blur set to my preference, vsync enabled, bounce light enabled, per-object shadows enabled, world decales enabled and set to 100%, and DLSS set to "Quality" and I'm hitting 80fps in the police station which is perfect
If it is an issue with specific specs, then you would need to submit a bug report showing said specs to see any trends
Still getting the "Serialization Error : Action Needed" "Corrupt data found, please verify your installation." screen even after following this #āmodding-faq-archive message .
Prior, at 4k, I was sup-40 fps with everything off or set to low with DLSS set to ultra performance
"failed to uninstall due to busy" pls explain
That means you missed something
#āmodding-faq-archive message Have you followed all the steps here?
Well, I've checked and there are only the 21 paks and I deleted the mod.io folder.
That means that you are trying to uninstall the game while it is installing, will have to wait for steam to pause or stop
Verify the game afterwards
I have done so.
Take a picture of your paks folder to be sure
Let me try that.
Could i get some context?
Anyone having an issue where in commander mode you complete a mission with an A grade and it still shows as unresolved?
Post your CPU and gpu
so i uninstalled it, started to reinstall, and now its "validating" before installing it
Known issue, you need to complete all objectives (no failed objectives)
Known issue in a not bug way ^
i have a problem, had to enter in safe mode bc i had some mods but i cant pick the Home invasions missions, any solutions?
You have broken mods, #āmodding-faq-archive most recent message
CPU: AMD Ryzen 5 5500 / GPU: AMD Radeon R9 200 series
thank you thinking back I did miss one soft obj
Thanks! It worked.
did the issues with the fps got resolved
for some reason im not getting any of the new weapons or maps. i have supporter edition and the DLC is installed
Hey I did a fresh install and it still hasnāt loaded the DLC yet?
anyone know this fix?
Opt out of the test branch and update the game
Let it load from there
Not familiar with AMD cards, but you appear to be at or below spec. The game may not work very well on a card like that anymore
Hell everyone, Ready or not Crashes before i can get into the main menu or it BSOD's on me. I am running a RTX 3080, I5 processor, and 32 gigs of RAM. I updated all drivers to their most recent version and ensured all mods were removed. I am still having the same issue. any ideas?
sorry to whoever I accidently replied to there.
What version in the top right corner in the game? If it is not 54936, then your game is not updated
I'm above minimum but below recommended, it ran just fine before. Did this update just ruin it for my specs..?
Itās 54936
Performance changed due to the engine upgrade, so perhaps
Wow... alright, thanks for clarifying.
Then you are good to go. You cannot launch the new maps from commander mode though
is 1660 super good or did i got fucked in the ass
How would one get the new maps?
Have you tried safe mode as well?
I have the DLC and everything
My 1660ti runs at a stable 30fps at 4k, so you can try to base it around that, I dunno.
Practice mode or coop
Are the new maps only for multiplayer? I'm trying to launch them from commander mode and it is just grayed out
Oh I see they're just for practice mode or coop?
BSOD is a hardware or Windows issue outside the game. Not sure you can get an answer here
correct
30fps isnāt very optimalā¦
optimalization suck ass
Those are my specs but Iām running at 1080p. Getting a solid 45 fps
we need to wait for the devs to fix it or we need to get used to 30 fps
bloodborne moment
The option for home invasion is greyed out in my single player game. I have all the maps completed on this save. Is this a bug?
I love blood borne
Considering I'm running at 4k on 3440px1440p, I'm happy since this update has actually improved my performance, I couldn't run this game on my main monitor at a stable fps before.
I haven't, i'll try right now.
Oh Nev mind Iām dumb
You can't play it on commander
I get below 30 fps if I look at my swat team, lol
so basically:
anything above 30 series = better
anything below = shit
basically
ue5 moment
if you want this game to run above 60 fps buy rtx 3000 something
its not because of the engine its because devs decided to not optimalize the engine
find a good running ue5 game
i bet they will ge tback to ue4 if they at least care
When I try to launch the game it gives me a serialization error followed by "corrupt data found, please verify your installation"
Broken mods #āmodding-faq-archive
oh shit my bad
like literally i worked my ass off to pay back my mom who bought this game for me and now i cant fucking play it normally
why do my settings keep resetting in game when i exit out of the setting menu
Graphics settings need to be appled using the button in the bottom right
What are your specs again? Including OS and monitor resolution
i am doing that
gtx 1660 super and i5 12th gen 16 gb ram
What resolution is your monitor?
1920 x 1080
Tryyyy... increasing your resolution in-game to max, go into advanced and turn down post processing and AA to low, then enable DLSS and try to set it to balanced or somewhere around that
You can also try increasing to high but make sure that AA and PP are on low
aight i will try
Running in safe mode didn't alter much or anything at all, game still doesn't like my graphics driver and i'm still getting below 50 fps on the lowest settings.
This update might've just killed my specs.
i have supporter addition and it says i have the dlc but i dont have the guns or maps i deleted all my mods still nothing
Itās a 1660, he doesnāt have dlss⦠right?
Try what I mentioned above
Is anyone having audio issues, i can hear fine until i enter the main menu then all game audio cuts except for the random menu clicks
I don't remember those specifics, if DLSS isn't enabled then try FSR on performance
Opt out of the test branch, your game should say "Ready or not" on the steam library, if it says alpha, go into properties and opt out of the test branch
Try setting your output headset as default on windows settings
If you're referring to this, that is pretty much exactly how i ran my game. Since decreasing the game resolution pretty much ruins it.
I thought 1660 was above the recommended specs. Is that not the case anymore?
I believe something with DLSS makes it that (unless you are already on 4k) increasing resolution helps
hello
im getting "disk write error" how to fix?
I can't play the new missions and for some reasons some of the some of base game missions dont have a rating as in if i never played them.
That's a steam issue, it could mean a lot, I recommend Googling
New missions are not playable in commander. If it says unresolved, it means you did not gather all the objectives on that map
today RoN get a update right?
So they're only coop missions? If I'm hearing this right.
No, practice mode and coop
Just not commander.
Singleplayer > practice mode, hitting continue will take you always to commander
It did, yes
so now i have a error
umm i can talk spanish?
or only english
English only
ok wait
I updated the game and when I open ready or not I get a screen that says "The installed version of the NVIDIA graphics driver has known issues in D3D12.
Please install the latest driver version or switch to a different rendering API."
reinstalled it, now its just black screen
Try updating your graphics driver
well
Same š¦
What was the original issue again
fixed it now
As in the blackscreening is fixed?
I have an RTX Graphics Card yet for the DLSS Frame Generation it says Required RTX Enabled Graphics Card. But I do have one š¤·āāļø
Any thoughts
I'm getting ``Serialization Error: Action Needed, Corrupt data found, please verify your install`
Frame gen is only on 40 series and above I think
Broken mods #āmodding-faq-archive
I believe eman is correct
what happened to the performance? 4070 and i went from 4k dlss performance 120fps to like 35 fps
Thanks ill try that now š
So should I uninstall all mods?
Is this in missions? The DLC HQ is a lot more demanding than old HQ. And what DX version and settings?
Yes, they are all for sure broken due to this update
yes this is in missions as well. in dx12 and dx11
What resolution are you playing at + what resolution is your monitor
even the first mission only gets like 40fps, even if i turn all the settings down
probably devs didnt optimalized the engine before dropping update
4k dlss performance, 4k monitor. i was able to play on high/ultra until the update
what does unresolved mean, and why is it when i replay the mission and get a B, its still unresolved, the reason im asking is because i can only play the dlc (which i own) in multiplayer or practic
can someone help i just bought the dlc and tried to open the game and i got this error : sterilization error Corrupt data found, please verify your installation.
for some reason the L9 combat pants havent showed up but everything else has
What % is your resolution scale set to?
And try lowering AA and PP in advanced settings
It means you did not get all objectives, especially soft objectives
You have broken mods, #āmodding-faq-archive
I don't think they're called L9 combat pants
but does that mean i failed the mission, and if so why cant i play the dlc
oh, are they BST combat>?
i cant start the game it crashes my pc every time
100%, same as before
Not sure tbh, I know the shirts are
i lowered all settings. also dlss does its own aa
New maps can only be played in practice and multiplayer, so it doesn't matter
You can leave the map without collecting soft objectives, hence why it is unresolved, it wouldn't mean a fail necessarily. Think of the veteran on gas station
my game is giving me a error when i try to launch it it says corrupt data found please verify your installation
oh ok so its glitched
check the pinned message about it
where at
No, the devs have said it's intentional
Yeah that's why you lower AA in advanced, don't lower all settings, try putting them on high/medium except for AA and PP to low
oh alr that makes so much more sense thanks
i have everything lowered including aa off and i am getting max 40fps
with dlss when previously i could max out my 120hz refresh rate on pretty much every map
did they told you whats going on with the fps shit?
Thereās balaclavaās apparently?
im starting to think about buying better gpu
yeah where did they go
its the game its not your gpu
Only for the three new heads in multiplayer, it seems
i cant even run the game
im starting to get upset i worked my ass off to pay back my mom for the game and i cant fucking play normally š
Thank You
Just lost power from a storm, fun
is that permanent?
Try raising it back to high except those 2
wondering if we could roll the update back for now, iām sure theres a way
Dlss has some fun quirks that you may be able to use
they did kind of fucked up the game fps wise right ? I was playing stable 160-170 and now Iām playing 70 lol
i doubt if we could it would be great but for now i bet they did not optimalized the engine
so i think this is why most of the people are lagging rn
My game works now @rustic laurel after deleting mods, updating to latest drivers and verifying files via Steam. Thanks for the rapid response! š¤ š»
Not sure
Describe the issue with more detail
right click on the game in your steam library, select properties, then beta and select the previous version
When i start the game either in direct x 12 or in safe mode it crashes my pc
is the purchased cosmetics the l9 shit
im in middle of downloading the game again
Yes
is there still more map unlocks
im gonna validate the files and try again
RoN does not have downgrading to old versions besides the test branch, but that isn't exactly a version you want to be in.
The DLC maps are not playable in commander, but in practice they are playable
ok, i was just explaining how to reverse the update
man i wish you could color the balaclava a bit of a let down ngl
I have all the missions completed, why canāt I click on the dlc maps?
š
still getting 40 fps lol
It is not playable on commander
game is cooked
Take a picture of your in-game graphics, both normal and advanced
Oh, thatās a let down damn
cant toggle home invasion and i bought the dlc??
server wont let me post pictures
DM me it
It is only in practice mode and COOP
you can equip them by changing characters, theyre the last 3 at the bottom
Kay thanks
yeah i found them thanks bro
my game crashes at 100% loading everytime
Try removing all mods (or double check to see that you have no mods) and keep in mind that on dx12 loading is more intense since it is preloading the map and caching it
i did this now it says i have a corrupted file when i try to launch the game
You have broken mods now, #āmodding-faq-archive
I tried steam verification and still got this one guys
Hey, has anyone else is ready or not completely broken their steam?
Serialization error: action needed
corrupt data found please verify installation
You have broken mods
Define broken your Steam?
Like it's constantly on an install screen but it's not installing anything and it won't let me install anything else
When I try to load into the HQ in practice mode it goes near instantly to 100% loaded and then I stay stuck on the black loading screen
Nvm we good
even if mod-io folder is empty it should be deleted. mine was empty I deleted it, everything runs just fine. thank you very much@rustic laurel
Interesting
did the supporter edition shirt change? it used to have camo now its olive green and doesnt work with the rest of the outfit? from gx combat shirt to FISA g3 combat shirt
having the same issue here as well
nvm you change the styles
If you are having an issue with mods not being removed, follow the steps in order here #āmodding-faq-archive message
Is that for the corrupt files thing with the DLC?
Yes, old mods cause that error
am i the only one playing the game fine?
i was able to run the game after validating game files
but what happened why do all the graphics look different now? My game runs like shit now unlike before i was able to run on the highest settings with no issues
What DX version and what are your specs
The balaclava is only selectable in MP under the character echo
Blame the transition to UE 5
will this change? will they fix it to be an item for all characters even in single player?
Thx for ruined performance,
I do not know, they haven't said. It is very demanding on the modeling team because they have to custom fit each character for the balaclava, it is not something they can just copy paste atm.
casually gets 10 fps 
What are your specs, graphic settings, and dx version
yeah makes sense. I just thought they wouldve had it by now
r7 5800x 32gb ram and 3080 i play on capped fps 60 and gpu wattage was like 100 now its 250 ITS A 2,5 WORSE PERFORMANCE THAN EARLIER ON SAME SETTINGS
Lowest settings, (donāt know CPU off the top of my head ), 32gb ram, 1660 super
Take a picture of your in-game settings amd message them to me
Try setting your graphics to medium or high with AA and Post-P set to low, and DLSS/FSR set to balanced or higher
ok so i changed the settings to medium and i get 60 fps in the hq
Try playing another map, not dorms, dorms is intensive. The new HQ is more intensive than the last one, so it's not an accurate display compared to other maps, especially vanilla
so like 4u station?
aight , but idk tho cuz i played twisted nerves and i had like 25-40 fps depends where
so after i installed the update my game says corrupt files please very installation
anyone know a fix?
i have around 65 fps in the 4u
Imma try that
Check the pinned message about it
You have broken mods #āmodding-faq-archive
Keep in mind that it does its best to load all the assets, but there may be a few it misses (I assume.) You should have a relatively smooth experience though, stutter wise, even if FPS is low.
Not sure if i can get help here but I keep getting a serialization error
Broken mods #āmodding-faq-archive
Prior to the update I've never gotten it
Game keeps crashing when hosting friends only lobby. No mods and never had this issue before.
What DX version? Not safe mode right?
One message removed from a suspended account.
does dx 11 gives better fps?
"Out of video memory trying to allocate a rendering resource. Make sure your video card has the minimum required memory, try lowering the resolution and/or closing other applications that are running. Exiting..." but if you don't close the window the game doesn't stop
Thank you
They are out of date, they need to update their game (opt out of the test branch)
It might, but you should notice more stuttering I believe.
i cant download the newest version of ron any ideas to fix this?
What is your specs and dx version?
Opt out of the test branch in game properties
I've tried dx 12 and 11 and safe mode. Game just keeps crashing.
DX12 1080 ti but before i never had that before but the game still running no problem just the window pop up and i just don't close it x)
kk thanks
The old maps also run worse. About a 15 - 25 fps downgrade... I wish I got to finish my ironman run before the game became unplayable
One message removed from a suspended account.
Hmmm, try lowering your graphic settings slightly and see if it continues
Try dx11, I need to check something
Hi all, I own the supporter alpha and it says I have the new DLC in library on STEAM but I can't access the content in game
hello . i have the game fully installed and i played like 15 hours but when i opened steam it says need to update 46 gigs . the game is fully installed with more than 60gb of files . i tried verifying the game files in steam and all of them were fine . idk what to do please help .
What are your graphic settings
Make a post in #šarchived-bug-reports-channel , following the formatting in the pinned message (if you are not able to solve it)
You cannot play the DLC on commander mode
There is an update today, you need to update the game.
46 GIGS ???
Yes, a new engine, lots of tweaks and bug fixes, and dlc changes.
Read the patch notes in #announcements
any fps boost ?
I'm on practice mode with a fresh save, cleaned out all mods and progress. I can't even find the new guns which I thought was going to be accessible immediately
It seems to depend on your specs atm, some better than others, I'm on the better side atm.
its running in 11 and the message didn't pop up yet
What game # does it say on the top right
Let me know how far it gets if any issues
i have a 1650 with i3 9100 , any hopes ?
ok
I have a 1660ti and I'm able to run at a solid 30fps at 4k using my 3440px1440p monitor, which I could not prior to this update. This is using DX12 with PSO caching.
There's also tweaking I could do to get more, but I like the game like this.
Oh, and my graphics are all high except for PP and AA as well as FSR on performance
Oh Im guessing I have to turn off the alpha supporter version option in Steam yeah
Yes
Yes
All my graphics are at medium. Entity shadows are off. Resolution is 1080p. I dont have access to DLSS. I tried all forms of FSR but haven't seen any changes to performance. Some graphical settings seemed to be bugged? I don't see a difference when turning off AA for example.
46 gigs is unreal . tnx mate . i was thinking it was a bug .
What are your specs and your monitors size
1660ti i9 32 gb ram and a 1080p monitor
Did they fix the low frames?
Try setting your resolution to 1080 and set resolution scale to max, AA and PP low
There has been no patch yet, what are your specs
1650 ti 16gb ram i5
I bought the DLC and installed. How do I access the DLC maps, is there a certain prompt ? Nothing comes up in the mission select
soerry, what's pp?
It ran on about 80 to 100 frames
Post processing
What are your in-game graphic settings
But now itās like 38
Somewhat low near the settings I used before update
There is a mission tab saying home invasion, if you don't see it then you aren't on the right game update, if you do see it but can't select, it isn't available in commander
DX 11 or 12?
I barely know what that is lol
Ah okay I believe in in commander mode then, I see the tab on the top left but cant select
When you open the game, do you select the first launch or second launch options
I'm on all low settings and have turned off a few extra things I get 40 fps max š
Thereās 2 launch options?
no bug yet for now
this game suck so bad
What specs n dx version
its unplayable tbh
Real
If you don't see one, close the game and then right click it > manage > properties > and there should be a drop down to select game version, set it to ask on launch
i played two missions and entire game was eyesore
Ohhhhh yea I know that
Is there a reason its not playable in commander ? or just a current bug ?
I do not know, it is not listed as a bug
Low fps?
So which one are you opening the game with?
yeah
Cpu: i7-8700 Gpu: rtx 2070 and I use the safe mode...
Did this. The game lost 40 more frames
Does it not open if it isn't on safe?
60 fps barely
Idk I just click play
I got 38 
What about with DLSS on balanced or FSR?
Dude same here really low FPS. I was running consistant 90 and at one point it hit 18fps
I can't really help if you don't know which DX version you're on
I don't have an rtx card so I don't have access to dlss. FSR doesn't seem to do anything to the performance
Yes, when you open the game do you select DX12 or DX11
Dx 11 I just checked my bad
What FPS are you getting again?
will the devs fix the optimalization?
I think we have the same setup besides I have a 4k monitor and more ram
Oh well Iāll check and let you know thank u for the help
If it is engine side, they will patch it, I can't say what they're up to atm since I do not have access to that
probably engine side since everyone have fps drop
The issue with DX11 is gonna be stuttering because it does not load caches in advance, try playing a map like gas station since the new HQ is pretty intensive compared to the last
anyone know how to fix my game getting stuck at 100% loading?
i had 100-120 now i barely hit 60
ahh ok. I'm getting around 25 to 45 fps on pretty much all maps
Loading the game on DX12 is a lot more intensive now due to it caching the game while you load, you'll have to wait
I get around 30 fps, but it is a very stable and smooth 30. I could also probably knock it down to medium or low from high if I wanted more, but I like it here
The new missions are not playable in commander mode, only in practice and multiplayer
Ohh okay. Because I make video content on the game, I try to get at least 60, but I guess that's not in my wheelhouse anymore
Having somewhat of the same issue, I can get a consistent framerate of above 60 in basegame maps, but for some reason while playing dorms, it goes below 60 frequently, most of the times hitting a rough 30-40
Dorms is very intensive for how big the map is
So should I switch it to DX 12?
You can try DX11, but I am not sure how smooth it would be since it does not have pso
I would try it
Oh okay, is there a reason for the limitations ? Curious since the previous missions were accessable in commander mode
Is there any word that they plan on optimising it at any point? I can run maps like Neon Tomb, Relapse, Rust Belt, all above 60
It was stated that way in the patch notes, so I assume it is for story reasons
Did anyone else's loading times slow down after the update?
Ah okay, thank you brotha
I wouldn't be able to comment on specifics like that, I do not know
Oh, alright
idk i cant even load past the menu with dx11 or 12
Yeahh I tried that already, but the fps got even worse... I guess my card just isn't above the recommended specs anymore
Loading past the title credits took a bit and loading into the game took ages
Also, I'm having this problem with the other DLC maps too besides dorm
Maybe the techniques UE5 uses to run the game aren't very compatible with my 1660ti
I have a 3070 myself, going through the same stuff, the police station is quite laggy for me
That super sucks tho, because I was in the last third of an ironman run... Not to mention I've been a supporter since 2019... shit
Hello when I launch a map from the dlc the game crashes every single time even on safe mod without the mods and after a file verification....
Does anyone know why I can't run my game on direct 12 but I have a 13900k cpu and a 4070ti ?
so I was trying to mod the game with a mod collection, and it broke my game not letting me in, so I uninstalled the game and removed every mod and all files, yet I can't re-install the game, It downloads everything fine yet won't install them, I get a message that tells me "disk write error C:/Program (x86)/Steam/steamapps/common/Ready Or Not/ReadyOrNot/Binaries/Win64/ReadyOrNot-Win64-Shipping.exe" Please Help
Double check no mods remain #āmodding-faq-archive
I am noticing a trend that your CPU may be having specific issues right now.
Oh well that's good š
Stuck in the same boat lol
Good parts = lower graphics
I'm not 100% on it, but I'm noticing a trend
You have an issue with steam and/or your antivirus blocking the file, likely antivirus
I really wish I could roll back... I have a feeling that UE5 is going to permanently fuck my game over
I think what fixed it for them was setting their settings to
Try enabling DLSS on a balanced setting and potentially increase resolution to 150%. You can also try turning off AA and post processing to low
Try DX11 and see if you can launch the game in the meantime
Actually, my bad, i got a 13600k, read it wrong lol
I think AA is broken. I change it, but the image quality doesn't change at all
I can get in on dx11 but just not dx12
Try those settings and see if you can try 12 after that
Correct
i cant launch on dx12, it says
"directx 12 is not supported on your system. try running without the dx12 or d3d12 command line argument"
I cant find where the command line for it is
It will ask on launch unless you set it as default, go into game properties (right click the game) and set ask to launch
I'm getting around 50 fps now so it's a small boost. I think my pc Is holding me down at this point
Launching with safe mod isn't enough ?
I tried this myself, launched with DX11 & changed the settings, still getting lag
@rustic laurel where do i go to check again?
No.
Safe mode seems to have issues with crashing
Were you able to open Dx12 however?
You should be fine with the 2070
Yeah, DX12 launches fine, but I still get the lag problem
I am getting lost in chat, remind me of the issue again real quick
low fps
I'll try to do the same with DX12 and see how it goes
I'm unable to get the DLC to run despite having the supporter edition. Checked for any chages in both single and muliplayer and none appear to be updated. Can someone asist?
DX12 should PSO cache as you load maps/play, try launching a vanilla map like gas and see
Opt out of the test branch in steam settings
Thank you
For DX version, right?
idk how to check the launch thingy
ye
Right click RoN, go to manage, go to properties, and then there's a drop down menu where you can select ask on launch
Still feels laggy
Laggy as in stuttery, or just low FPS?
there is no properties
only if i click the gear
same here, my fps seems to have been nearly cut in half with this update
yea i seen that i knew that i could do that im just stoopid
You mean checking the subscriptions in the mod page in the main menu right ?
Are you in borderless windowed mode, or fullscreen? I had to change to fullscreen, and reduce resolution to 1440p
its on the ask one
I'd think it's stuttery, my NVIDIA preformance overlay says that there's 97 FPS, with the 99% FPS being 14-15, and a PC Latency of 45.5ms
Delete all mods, view the most recent #āmodding-faq-archive post
is there a way to play the dlc with bots?
Launch the game and select dx11
Yes, practice mode
ok thanks
well it never asks me but it was on that option let me see
OH im dumb
I'm getting really odd rubber banding issues when playing with my friend I haven't tried single player yet but is anyone else having these problems?
I'm running the game at 1080p with an RTX 3070 & 13600k
Borderless windowed mode, or fullscreen? The update defaulted the setting to borderless windowed mode
Fullscreen
Ah
What are your graphic settings and remind me of your specs
well i have it on custom because i was messing with them and i have a 1650 ti 16gb ram and i5
borderless, but i was playing at 1440 before the update anyway
Try setting to medium with AA and post processing set to low and FSR on balanced/performance
Change to fullscreen and see if you get an improvement
So...I'm confused. The dlc isn't in commander mode. Is that correct?
got me like maybe 5 more frames
Yes
What is your resolution set at? And what size is your monitor?
like the pixels?
Yes
1920x 1080p and its set on that
Try increasing resolution scaling to 150% and set FSR to at least balanced
Ok thanks I will try tomorrow
about the same
Not sure what more I can recommend off the top of my head
I've been trying every single potential fix listed and nothing is working. I think all I can do is wait for a patch to roll out that will restore the performance to how it was before, and if that doesn't show... I think that's like 90 to a hundred dollars down the drain :(
i feel u man :((
its ok u were a massive help to me i appreciate it :))
I also appreciate the hustle trying to solve everyone's issues. Some just can't be solved atm and you're doing your best
i kinda feel bad because alot of people were piling in and they answered them all id be stressed
Yeah I dunno, I can't get more than 30 or so with the settings I play on. But I did test, and going fullscreen with 1440p resolution x 150% scaling got me into the hundreds
it just didn't look very good on a 4k monitor
see I don't get that. We have almost the exact same specs and I'm not getting your results at all lol
i removed the anit-virus yet it did nothing
Hey is anyone else getting an error when trying to launch, It keeps saying corrupt and serialization error any idea what to do?
Did you test lowering your in-game resolution to 1440p and then enabling 150%?
Broken mods #āmodding-faq-archive
Verify your file integrity in steam
I got rid of all my mods
I think I said mine was 1080p maximum
Im on a clean launch
it did nothing
The clean launch option does not remove all mods
You have to do it as the steps explain
Does anyone know what's up with this... smearing? It's mostly shadows that 'smear' when the view moves at all. Sorry for the crap video, best I could do.
Ah yes, hmmm
To be sure did you set it to high with AA and PP low?
Where are you getting this error from then?
I did. My frames got worse when I did that
So I own the DLC but the option to switch to the Home Invasion missions is greyed out still? Anyone have ideas on how to fix? Thanks!
Idk at this point yeah
Commander mode is not dlc compatible
How's it a bug? Do we already know it's not a setting or driver issue?
From Steam, it downloads files to 100% but doesn't install
Ah, thank you!
I mean if I understand what you see, it looks like a bug, I just wouldn't know what setting that would be
It is still installing, let it install, it's doing hardware stuff
Clear your steam download cache, and try again. You may have to cancel and completely restart the download
i've tried that
They were getting a file permission error on the .exe for the game
it stops the installation completely
Have you restarted your computer
yes
Resolution scale has been broken in this update
i restarted it again and now it works, second times the charm i guess, thank you for helping though
I was going to say I was out of ideas, glad it worked
Currently, dx11 is the only launch option that works for me. From the menu, the only part of the game I can access is the tutorial because trying to load into the precinct will crash the game.
safemode only works for me
yeah that was odd
If safemode only works, you have broken mods #āmodding-faq-archive
I dont think its odd considering the whole engine was changed but its funny
What specs and graphics are you using
CPU and gpu
i wish we could access the loadout menu in the tutorial so i could at least try out the new weapons in the firing range.
intel i9, RTX 4080
Man I gotta wait 1 hour and 15 mins for it to download should've left the pc running
Iām having the same issue
does this mean i should uninstall all other mods that are from nexus and normal pakchunks?
or just mod.io ones that are installed from the game itself
graphics were auto set to ultra, but I lowered them to high
Same. This update deleted all custom graphic settings and removed resolution scale.
I systematically went through all the pinned suggestions
Even deleted save data
But the problem unfortunately persists
What chip exactly
Uninstall every mod until they are updated
Just don't delete the game files by mistake
Intel(R) Core(TM) i9-14900KF
Make the bug report, boss
Weāre ngmi boys
ok thanks cuz i was finna ask the same thing š
i was finna wonder if i was gonna have to ask for a refund
my chip is too powerful, suffering from success. Might be what makes Helldivers not work as well.
when i try to open ron, it tells me corrupt data found, please verify your installation, what should i do?
yup did it
now dx11 works
You have broken mods #āmodding-faq-archive
Forgive me, what do we mean by 13/14 chips?
i can launch dx12 too
I think roughly 13900 and 14000+, that's the trend I'm noticing at least.
game is freezing whenever i try to start a friends only lobby, it gets stuck at 100%
Ohh
Let it load, DX12 is more intensive due to caching the game when you load the map
ah ok
im trying to do your tutorial and it wont even let me browse local files, i click it and nothing happens
You can open file explorer, go to your steam install, common > ready or not > readyornot > content > paks
Hi my game keeps crashing my entire pc randomly
Use DirectX11
Not normal for it to crash your entire PC, update your windows + graphic drivers
yeah, this happens too - blue screens me
like it just instanly shuts down
Pc specs ?
i bet hes got a 13/14
This might be a dumb question but I haven't played the game in a year and last I did was with mods. I updated all of them and they are still not working. Did an update come out really recently and the mods just haven't been updated for the current update or what?
its not blue screen it just shuts down, and ill check hold on
Yes, a update came out today, they are all broken
Thank you!!
Overview
Computer model: ASUSTeK COMPUTER INC. ROG Strix G814JZ_G814JZ
Operating system: Microsoft Windows 11 Home (10.0, Build 22631)
Processor: 13th Gen Intel(R) Core(TM) i9-13980HX 24/32
Motherboard: ASUSTeK COMPUTER INC. G814JZ
RAM: 16 GB
Storage: NVMe Micron_2400_MTFDKBA1T0QFM (953.9 GB/Fixed hard disk media)
Graphics card1: NVIDIA GeForce RTX 4080 Laptop GPU (12.0 GB)
Graphics card2: Intel(R) UHD Graphics (1 GB)
Your laptop isn't stable under load so it's shutting down.
How do fix that?
It seems that 13/14th gen intel cards are having some kind of issue.
ive had this issue with helldivers 2 and i could never figure it out either
how do i prevent this with ready or not
Intel claims mobile SKUs are not affected, but who believes that ? 
Idk man, the trend is forming
It's either 30/40 series cards or the chips, and the chips seem to be the more consistent one
Good evening, does anyone know why when I start the game it automatically restarts my PC? 
Ensure the laptop is not running on battery.
If that won't help set Windows Power plan to something else than High Performance.
But at this point you should RMA that unit since it's very likely just defective.
Try updating your graphic drivers/windows
Because your PC is unstable under load.
The game now does have shader precomp on boot
What resolution do you remember the game running on
Why can't I update ready or not?
1060 6GB
Intel Core i5 10400
32GB RAM 3200
It shouldn't happen right?
People keet asking for specs as if a game that runs perfectly suddenly happens to stop working is normal
2560 1600
Opt out of the test branch
ive had this for too long the warrantiy is done
We are noticing trends in higher end hardware relating to chips, hence why we ask, and it is also important to know.
I cleared the cache, now it's installing
i have a problem with my ai teamates, its hard to explain, i have a video of it if i can post it here or somewhere?
When it comes to the AI, make a #šarchived-bug-reports-channel #1050535723087958156, there is nothing we can do here unless it is abroken AI mod
I have an i7-13700kf and am crashing, I think youāre right
Did Kaminsky told you about the Intel screwup at all or ?
I've informed him about what's coming for them with that UE5 side-grade few days ago.
He mentioned that it may be an issue with those cards but nothing confirmation wise, I think
@odd trail
my brain is melting so I may have forgotten
Yup, we're aware of the Intel-UE crashing problems
Is this on Intel GPU's or Intel processors?
CPU
13/14 series, correct?
Yup, the higher end you go the less stable it gets.
Intel is suppose to release a microcode update to adjust voltage curves in August or something.
That means users have to wait for another UEFI update and hope their board gets one.
Fun stuff
Do I have to reinstall it after it done updating
You should not have to
Although it will begin patching the files as part of the process
does anyone else have a corrupted files error on start up?
I do
mod issue, check the pins
Check the pinned message about it
Any mod from before the update can cause it
tracking, ty
I do.
Ola guys, can anyone help ? game is still crashing at the begining of loading, after integrity check still same problem, i cant run it on RTX 3070 i7 9700 Kf
and ? its workin now ?
Nope.
Check my pinned message
Tried 4 times and it still not working
How do I get back to change it from 11x to safe mods after I Already cleaned it?
How do I fix my driver
If you are getting that error, the only thing it means is that you still have a bad mod installed
Follow all the steps in #āmodding-faq-archive message
In order too
I'm getting stuck at 100% when loading into headquarters, and then the game freezes up and is using 95% of my CPU capacity. I'll try launching in DX11 next. AMD Ryzen 5 5600 & RTX 4070 Super
Update it using your company's utility (GeForce Experience for NVIDIA cards)
After try clean start, game cant run, worst than try like DX12 classic launch with corrupted pop up menu
Be patient, it can take 5-10 minutes the first time
Why cant I do the dlc maps in commander mode?
Dx12 has longer load times while the game PSO caches. You have longer load times, but less stuttering in-game
Just can't
mmmm interesting ok, yeah it loaded up faster but with the same basic issue on DX11. Thanks!
I am unable to access the dlc on single player even though it is purchased?
Have you tried both DX11 and 12, plus safe mode launch options?
You cannot access the maps from commander mode, only practice or coop
And what part of the game is it crashing. When it starts up, or when loading into a map?
with dx11 or dx12 game instantly type pop up menu : data corrupted, i tried 5times check integrity still same problem, when i tried play with clean data around 3 times nothing happend, after accepting clean data start game cant run.
Just to let people know the only mod that has worked for me so far is the gear unlocker (home invasion)
Cause they updated it for home invasion
Follow each and every step here (in order) #āmodding-faq-archive message
guess i can't get the achievement Beat cop cause when i finish the mission my game crashes
yep
Hmmm
Make a bug report #šarchived-bug-reports-channel #1050535723087958156 but I haven't heard others with that issue
So if I run DX11 I get horrible stutters and rubber band in game but if I run DX12 I have the longest loading screens known to man. Is there any fix to this?
so how do i enable FSR3 with an Nvidia GPU like other games?
DX12 will cache data and reduce load times afterwards, so be patient
It's not reducing load times
how do I get the serialization error to stop? saying need to verify install: ive verified integrity twice
Subsequent attempts to load are even longer
Reduced load times as in it no longer has to do PSO caching
Most recent pinned message
Loading times will be longer in DX12 because it caches the map when you load, but you will stutter less when you play
THANKS
Ok I guess I give up on the PSO thing, I know nothing
Is there no way to make the game playable as in it doesn't take forever to load on DX12 or I don't get stutters and rubber band on DX11?
Take a picture of your paks folder
No, not besides upgrading your specs (even then newer rigs have intel chip issues.)
It is best to deal with the long load time, your real gameplay will be smoother.
I literally can't it works like once or twice then freezes up because the loads get longer consecutively
I can only say sit through it, it is loading the entire map pretty much, but at least it won't stutter when you play. Otherwise DX11 does not have that and will stutter
Wait, is the PSO caching split between main menu loading screen and levels or ?
I'm still in me bed 
A bit of both
Mainly loading screen, but some while you play as well
i think
asking again.. changelog says FSR3 is in the game, how do i enable it? i only see FSR 2?
Hey guys, I have the supporter version and the new maps don't appear in the game for me. Am I forgetting to activate something?
That is just a UI bug
If you do not see the DLC tab, you do not have the right update. If you do see it but can't select it, you cannot play dlc maps on commander
how do I activate the overbarrel attachment for the raider x p320? I have a flashlight on it but when I turn my attachment on it only has the ir laser
does it automatically enable frame generation if i choose a preset?
I believe frame generation is for DLSS on 40xx cards
oh so this FSR doesn't come with their frame gen then
I don't believe so
Having fsr 3 does not mean its frame gen is inherently enabled.
It's just a plugin version.
But if the game already has DLSS-FG it should support FSR3 FG as well.
I bought the DLC, but I can't play it when I enter the game.
What should I do?
It's only in Multiplayer and Practice. Not in Commander mode.
oh Thank you
Does the locker say it is changing if you go out and back in
yeah it changes to a laser pointer but I still get an ir laser when I turn it on
aight
also my friends are able to use the lasers but mine stays ir no matter what I change it to
very weird
Is it normal when I open replay and there is no shooting animation or anything? There was only the sound of walking and surrounding sounds. But the sound of the gun and the animation of the gun shooting and the sound are non-existent.
That is not normal, but I haven't been able to check
make a bug report in either case
okay thanks you
Would video memory problems be related to the 13/14th Gen Chip issue? Keep getting crashes on each type of start up and Iāve tried a couple basic updates/restarts/reinstalls.
@rustic laurel so how you said dont delete "21 core files with "windowsnoeditor" 0-20, do not touch these", what do i do if they arent in my paks folder
Verify your game files and prepare to reinstall the game entirely, because you deleted the game files entirely
Yes, read the pins in #š¬general-discussion
One thing you can try is lowering your resolution
was just wondering, i already deleted and am reinstalling bc nothing would work
had to system restore
How would I lower my resolution if I canāt get in game?
Can you access it from somewhere else?
When the game launches, try hitting alt + enter really fast
You may also have to use steam args to force the game to launch in windowed, but I don't know the cmd
Users of 13th and 14th gen Intel processors, or users experiencing unexplained game crashing after exhausting all other troubleshooting steps may refer to this: #š¬general-discussion message
Couldnt get an answer elsewhere and i dont see it mentioned. Do i have to complete all of the regular RON missions again to get to the home invasion ones? My list of completed missions is empty but when they unlock it shows my old score. And i dont see the home invasion missions
The new maps are not playable in Commander mode, only in Practice and Multiplayer
that explains it
does anyone know how to download the DLC? It's not giving me the option to
opt out of the test branch
Opt out of supporter alpha on steam, then restart steam
thx
Never had any lag before the update, why is there a bit of lag now?
i was tryna scale my game down to 90% but when i pressed save and go back to the main game it went back to 100%
What are your specs
I have seene people report that, yes
What does it matter what my specs are, I never had any problems before the update 
It does matter because 13/14th gen intel chips are having hardware issues
I got the achievement "After the Storm" on accident a few days ago, how do I delete it so I can earn it for real?
What file? It doesn't matter anyway, since you can't use the mods from before the update.
nvm i found out how to i think
its the one that are on the menu when u load up the game
I would advise you to not use those mods, almost none of them have been updated today
No wonder people's PC keep shutting down, the Main Menu scene is still not forcibly capped to 60FPS, at least not for existing users, so 300W power usage just from the GPU sounds like a good idea when it is now paired with shader pre-comp 
As a Best Practice for 3D menu scene, the devs should cap it at 60, forcibly and independently from gameplay. Precisely so they can avoid dealing with issues like these.
It's not that hard to do and it just offloads people with unstable PCs to another developer 
Are mods not working w/ the update? Having issues with in-game menu installing
None that were not updated.
Also, i heard some whispers that logging should be enabled with UE 5.3 upgrade, i guess that didn't materialise either 
Every time i try to open the game it just says Failed to open descriptor files and it wont let me open the game šæ
Verify game files in Steam.
I downloaded the dlc I own the supporter edition but I donāt have anything new Iāve tried multiplayer and practice mode
I just bought the dlc it says it downloaded but I donāt see it at all and when I go play itās greyed out wonāt let me click it
If the game version does not say 54936 in the top right, you do not have the update. Opt out of the supporter aphpa branch on steam, then restart steam to get the update.
How do I opt out?
Choose none
I think that may have done it itās updating thank you
I bought the dlc but wonāt give me the option to install
It is technically already in the files with the updated game. Does it say version 54936 in the top right?
Iām all updated
Then you should just have access already. The new maps are only in Practice and Multiplayer modes, however.
FYI the Home Invasion is NOT a DLC, it's a licence key. The content is included in the base game.
It could have been mentioned by devs a bit better.
anyone with the home invasion name appearing gray when playing solo?
i cant click on it and cant play the missions
The new missions are only in Practice and Multiplayer modes
right, didnt know that
Getting an error when starting the game after buying the DLC and installing the update 'Serialization Error. Corrupt data found please verify your installation'
First time this ever happened. Verified the game and even uninstalled and reinstalled, same issue.
hello, i have a problem, the option fsr doesn't do nothing and same if i want to set manually the resolution scale, any help? i have an rx 580, latest drivers
pd: i apply but if i come back the settings in the case of resolution scale comes back to 100% again and the fsr stays where i put it but nothing happens
Any fix available if the update is stuck on 1% - Installing State
I saw in the patch notes that they added fsr 3.0 but I dont see it in the settings after upating the game
are we able to use mods yet? these ai's are beaming meeee
When reading patchnotes, do scroll at the bottom to get list of Known Issues.
In general, for any game.
As for FSR, it's currently non-functional anyway.
My framerate is a complete slideshow, tried every possible fix, any help?. I have a GTX1650 and before the update i got a smooth 100-70 fps, now its dipping below 30
there it goes my money, using fsr it is literraly the only way i can play comfortably this game
So that's why im not getting my old fps?
It'll be fixed eventually.
sure thing, the fsr it is not working
yeah sure but when, months from here i'm sure
If you relied on FSR to do the heavy lifting then yes, it's broken and your FPS will suffer till it gets fixed.
If you did not use any FSR preset, then that's another issue entirely.
Well before the update i got 70 fps without FSR and 100 with FSR
now its hovering around 30fps
anyone know how to get the achievement hidden and dangerous?
the description literally says what you need to do
nah is it without nutralizeing suspects as in arrest or not doing anything with them
or am i overthinking?
i think doing nothing, because neutralize a suspect it is or arresting or killing it, so... the title says "hidden", rescue the civillians while the suspects don't see you i believe xd
aight
anyone else get the dlc after the update and now it wont show up in game? i even reinstalled the whole game, anyone else have this issue or a fix?
DLC maps are only available in Practice and Multiplayer. And if you do not see weapons either you are stuck in Supprter Alpha branch.
that would explain it lmfaooo thank you!
loaded a friends only multiplayer and the dlc went through perfect just incase anyone has the same issue! thanks guys
Try launching in safe mode
My game is stuck on installing 1%. This is the only game I have that has this problem
to try and uninstall the mod.io stuff right or just play the game in safe mode
The mod will never be uninstalled unless you uninstall it, so you would be trapped using same mode
I bought home invasion DLC but I can't select it in mission select, and my game version is 54936
It's only available in multiplayer and practice mode.
Hellloo, having an issue when launching Ready or Not. The game immediately goes into a black screen with no response. Iāve cleared mods, deleted every file, reinstalled, and restarted my PC. Iāve also tried to verify the integrity of the files, however nothing seems to work. Was working fine before the update came out, perhaps I screwed something up?
Oh, thanks
Post basic specifications of your PC.
hey y'all, i'm also stuck at 1% installation. is there a fix for this?
i91200kf
Rtx4060
32gb
Installing on an Nvme
Which Nvidia Game Ready Driver version ?
Ooo, forgot about that. Let me see if I can update it. Tysm willing to bet thats probably the issue.
i legit s ranked lawmen three times and i did not get the achievement hidden and dangerous
like what do i do?
Got the DLC but most content is missing, any ideas what i can do? I already did:
- Verify Game files
- Starting in Save Mode, DX11, DX12
- Changing brand to "supporter Edition", let it patch, change it back to normal
Tested it in Practice mode and Multiplayer (Friends Only Lobby)... For reference, look #šØron-screenshots-and-art , as you can clearly see i only got the L9 Tops (sleevless and with sleeves), no vest, helmet, pants ..
same issue here.
can't hear other players mics
What is your current game version ?
hello after the update i take a Serialization erroe corrupt data found and i cant start the game ...no mods inside i run integrity of games file no problems....any solution thanks
You have mods or corrupted files, this message simply does not appear in any other case.
54936, also tried to clean up everything including my settings etc. didnt help aswell
i remove the mods from file...
for corrupted files i run the check and didnt found any
all 179 files successfully validated
If anyone is using the customisation unlocked mod, or anything that has to do with progression, it corrupts
Uninstall the game in Steam, go to ".\SteamApps\Common\Ready or Not" and if there are any files remaining, delete them, those are mods.
Reinstall the game afterwards.
thank you very much for the help i will do
My game keeps crashing after the update
Game freezes during gunfights and i have to either sign out of my pc or close the game from task manager otherwise I'll get a black screen
Post basic specifications of your PC.
Gtx 1050ti
I5-6400
8gb ram
Installed on ssd
Is there any way to go back to the old version before last night update ? Used to get around 50 fps now with the same settings it's like 20 and crashes middle of mission
My game keeps crashing after the update
The fact that they managed to make the game run worse than it used to , is amazing
what about adding DCL to commander mode pls, is this a bug?
Dlc takes place 4 years after the story in commander mode that's why it's not playable there
just played the update and the temps i'm getting are insanely high. to put in perspective cyberpunk and starfield run at max 75C on both cpu and gpu but ready or not is getting 85 on the gpu and up to 90 on the cpu. anyone know what is causing this?
my performance isn't bad just the temps
What š is this a 4 year long hurricane? and besides this, commander modes is your main mode with the most fleshed out mechanics, why not add it to the main mode, is it not possible?
We gotta wait for another update . Maybe they will fix it instead of giving out a dlc
I'm also having the same problems with temps and performance
u cant even listen to the briefings in Practice mode š¦
We downloaded 46GB update just to get worst performance. Nice
the update isn't 46 GB, it just patched lots of things. the total filesize is still <60 GB
i was able to fix most of my performance issues by tweaking the settings but i still have a problem where i experience massive frame drops when looking at my AI teammates. whenever i look away though its fine any idea whats causing that?
what is the recommended nvidia GRD version for this update?
It's still 46 needed to be downloaded
i'm guessing it's 46 GB of work for your drive and not a 46 GB download, i could be wrong but if so that's strange since it took less than 2 minutes to update
The update IS 46GB of actual delta between the UE4 and the new version, while it's patching 58GB or thereabout.
Wait really? Lemme check
I checked my internet usage . It is 46 download .
im able to listen to breifing in practice mode
i guess i was wrong, my bad
Idk man ask Void they're the ones writing the story
Have you re-set your video settings accordingly to your machine spec ? Note that after the update they may not be the same.
Also, if you have used FSR before, it's non-functional and needs to be fixed by devs.
I got the crash on startup - can I just delete the mods folder in steamapps/common/.../mod.io?
Also reflections are forced now, probably why a lot of people's fps are tanking
Hey guys, has anyone else experienced all their cosmetic unlockables now being locked after the update? I can't use any of the stuff I already unlocked.
Yep I mostly play on low to medium and i don't use FSR, still it happens
why do i keep getting a crash reporter
idc about 46 gb . All I care about is that I wanted this game for so long and I finally got it like 4 days ago . And now this is the situation that the game is in rn . They managed to give us lower fps instead of higher. Idk what to do
Not a bug but can someone tell me why balaclavas are only in multiplayer?
New update is not looking good
In multiplayer you can change your character / head, singleplayer you cannot because you're just Judge
how come? it asks me to delete the save data or the mod data
Do you still have mods installed?
make sure to check your graphics settings (though i assume you already have), as they reset for me after the update. other than that i haven't experienced bad frame drops but it's gone from a stable 180-200 down to 90-120
Idk man . Lot of problems with the new update
The game on a 4090 is literaly unplayable rn. Constant micro stuttering like I can't move and play.
i had no mercy for terrorists, and this wall hacks or something i got from a friend i use it so i can find the last civ
Uninstall them as they do not work anymore.
Just let us disable reflections and anti aliasing again
Your caching implem seems completely borked.
I already did . Going from 200 to 90 sounds so bad. I used to get around 60 now it's 20
And also fix the freezing gunfights it's crazy
what about safe mode? it should work right?
Safe mode should technically work, but I removed my mods anyways just for safety.
where do i find the mod pack folders again i forgot
press "browse local files" on steam when looking at the RoN page
yes im there there is engine, readyornot and saved
and some other files and stuff about manifest debug stuff
then follow the path:
ReadyOrNot > Content > Paks
i dont have content
it should be a folder
nope nothing
u sure ur in the right area?
Full reinstall didnt help aswell, but i keep you updated š
I am new to pc gaming and need help getting my game to work.
what kind of problems are you having?
Engine
ReadyOrNot
Saved
instalscript.vdf
Manifest_DebugFiles_Win64
Manifest_NonUSFSFiles_Win64
Manifest_UFSFilesWin64
ready or not icon
the ready or not folder
if there is a mod, it should say the name of it? there is nothing except pakchunks
Be easier to show a Pic
did you have your cosmetics locked after the update too?
Look near the bottom, mods will load with "pakchunk99" or a higher number
ok thank you so much have a great day
lmk if it works or not
How about how to disable reflections bro?
it works W opening screen
So no other cosmetic shows up at all? like you cant see their icon?
Maybe it'll help with my problem
i dont see any new stuff in the equipment section besides the L9 Tops
got a video in #šØron-screenshots-and-art where you can see it
anyone else having this issue? Corrupt data found, please verify your installation. I've verified my files and it still doesn't work
start in save mode; its your mods, either delete them or start in save mode without em
Mods can screw with your initial start.
thank you
Looked at the vid, wow thats a weird bug. Sadly different from mine.
im back with new issues
the client is not responding
unlucky i guess, its just locked for you? sounds like a problem with your appdata/savefiles
Try starting it normally, through either directx11 or directx12. For me, loading through safe mode gave me issues.
Yeah it's certainly odd, the game has all the data saved from my runs so I can still see the scores on the maps. However, can't use any of the cosmetics earned from getting good ranks on those maps : /
could imagine it has sth to do with admin rights maybe? windows messes up that stuff kinda on a regular basis, your save games should be in AppData\Local\ReadyOrNot\Saved
I'll take a look tomorrow and see what I can dig up, thank you for the heads up.
Is there a way to fix the crashes, black screens, and the "Out of Video Memory" error? There seems to be a problem with the Intel 13th/14th Gen CPU.
sth that could work, if you got your backup-entries set up every day, you can backup your windows to the state of yesterday, then backup your save files, then update RON and paste em back
you playin DX12 or 11?
I have tried both.
You can decrease load on your system by using DX11 as a workaround but if you have 13/14th gen Intel you have to keep updating UEFI (BIOS) till Intel fixes the issue.
The update is supposedly coming out in August, right? š
Thanks man
do u know what mod or smth did that?
cuz i have the same problem
Turns out the new DLC stuff is just labeled wrong in comparison to the Announcements š for everyone who had the same issue as me
When I start up it says data corrupted
run in safe mode/delete all your mods
I dont seem to have access to home invasion missions? is there something I have to do before hand or is there something wrong with my game?
they arent in commander mode
Ahhhh I see, thank you!!
of course, glad to help
So I get 60-90 frames but my monitor is 165 hertz I just got my pc got any tips of how to increase it?
lower graphics settings, update drivers, use DLSS/frame gen (if you have an NVIDIA GPU and it works for you)
My mods dont seem to be working. The game loads up fine, but for example Iāll use the in game manager to install a more slots mod but in game everything is still locked. Any suggestions?
no mods from before the update will work. if they're new mods, they might just simply be broken
Yeah ngl I just realized that, ty.
When the dlc was released, the game worked, now it's crushing in the lobby
Whatās problem? How to fix it? Pls help
Any reason my GPU gets up to about 96c whilst playing and causes my to overheat? 3070 w/ i7 8086k, 16 gigs ram. asked last night but someone said to read the pins, nothing there that relates to my issue
are there any plans to add supporter edition back onto the steam store? I like the other options it adds for customization
Even Reshade?
i'm not sure about reshade. if it doesn't mess with the actual game code or files, it should be okay. but it's been a while since i've used reshade so idk
I have an old version installed and the game crashes on startup so maybe reshade cause this but idk
I“m gonna verify the files and try to use the "no mods" launch option
probably your best bet without deleting all mods
i experienced crashing even in safe mode though 
I need to reinstall them anyways so it doesn“t matter
My update needs 7hours is that normal to be that big ?? Does someone have any tipps for that??
Poorly performing cooler, thermal interface or airflow.
Each and every single one time.
Its downloading 46GB and patching 58GB.
The speed of it depends on your internet connection and your disk drive.
Okey thanks
is the game freezing for anybody else? for the record, i removed all of my mods. dx12 freezes when loading in to the station. and dx11 freezes randomly in game.
No not for me
how you got it fixed my lad?
i mean i dont exactly have a very good setup, but i had zero problems before this update.
so, i dont know whats going on.
in commander mode when i complete a mission its still signed as uncompleted
Maybe look in ur pc folder and look up how many GB u have
anybody knows why?
Post basic specifications of your PC.
Did u look on the tablet where ur quests were
Ye
what do you mean with quests
With the new dlc all my S ranks is gone and all the skins outfits are closed how can i get those back i dont want to them S all again
i complete the mission with y, when i did everything i need to
Like there is a tablet in a mission in all of them and there says somthong like ,,arrest Michaelā or ,,rescue all of the civilliansā
amd ryzen 3 PRO 2100GE
16gb ram
nvidia geforce RTX 3050
not high end, but its strange as i had no problems before this update.
yes ofc i mean i cant finish the mission without doing everything:D
and afterwards when im back in headquater it says uncomplete
Thats a bug then
..okay
No
Try refreshing the game
also restarted computer
Okey
how do you equip a balaclava?
No clue, think it is in cosmetics somewhere and it is only in multiplayer.
where do you find the cosmetic section?
Balaclava is only in Multiplayer iirc.
Is there anyway for me to get better frames? I use to run RoN really good before the big update. But now it fluctuates from 100+ to the mid 50's.
I couldn't find the option in multiplayer for a balaclava
well, as i said, its in the game just not by the names in the announcement^^ the equipment team kinda messed that up i guess,
it keeps sayingI have corrupted data files even after verifying the installation, is there a way to fix this?
dont really get why its only in MP ..
Maybe cosmetics are not in the single player.
Check the pins, uninstall your mods.
Mods do not work with the latest version.
nop, all cosmetics are in singleplayer, just not the balac
Now i regret going intel i9 13th gen 
Might be unintentional, just wait and see if they fix.
so i guess for singleplayer i still have to use balaclava mod tho 
I wouldnāt use more, they are all likely broken.
Friday is so long for a bunch of fixes
If the engine upgrade didnāt break then I will be surprised.
Friday?
According to Kaminsky that's the earliest of when the fixes will drop
Game is just straight up refusing to launch. I reinstalled it, verified files, and I don't have any mods. What do i do?
What are launching it on?
Dx11, 12 , safe?
All of this, nothing worked
i know, was just ironic that i have to use a mod to use balaclavas, after they released balaclavas
Hm, maybe try a computer and steam restart?
will try, thx.
Look in the pins if you do.
Do you have a 13th or 14th gen cpu?