#💻tech-support
1 messages · Page 52 of 1
there is key inputs out there just have to find them I use BigGobby Full Functionality - Xbox Controller I'm not sure what you use but if you use Xbox I would suggest that one.
sadly the only prob is steam input its so laggy
why my game keeps crashing?
has anyone encountered such a problem? On some servers, I can't walk normally: slowly and with lags
Crashing on launch on both DX11 and DX12, can only launch in safe mode, Help please. 8700k, 1080ti drivers up to date
i really hope someone has found a solution for crashing while loading into a mission with friends, sometimes it lets me but that time is extremely rare. been trying to get it working for like 3 days now and we have researched but have no luck
to be honest, id just like to know if anyone else is also experiencing this issue. https://discord.com/channels/310075021882294272/1207033304981831702
Only crashes on rustbelt for me
strange. for me its all maps but theres like 3 times out of the 60ish times we've tried that its worked
and it works fine if it lets me load in
This is probably caused by the host having the gunfighter mod installed. Anyone who doesn't have the mod walks slowly.
You can try turning on the checksum in the settings so that you only connect to vanilla servers, but that will dramatically lower the number of servers you can join.
Thanks!
When I try to launch the game (dz11, dz12 and safe mode) game being stucked at blacksreen. No audio no nothing. i dont have any voicemod or soundboard. Any ideas?
Did you try to verify files trough steam?
Should fix broken game files
verifying rn i will give update
still nothing
Are your drivers up to date?
Or did you install new drivers and it stopped working?
If you dont use a soundcard you can find them on the website of your mainboard manufacturer
this happens to me often too, but it starts to work over time
That’s a network issue I suppose
Cause by the host ping mostly I suppose
my mod.io dosent work i tried everything when i restart the game it forgets every thing
Do not use mod.io subscription features. Instead use your browser to go to mod.io or nexus mods and use manual downloads.
#❓modding-faq-archive has instructions for installation and uninstallation of mods
Same issue here. Either the game freezes completely (including steam) or I get an error saying I don't have enough memory for textures? DX11/DX12, Low/Epic, no difference.
(1080ti 11gb, 32gb ram, i7-11700k)
Game is unplayable...
If you have Nvidia graphics card that is below minspec you'll have to use -ngxdisable command line switch.
how do i get my needed paks back
may or may have not accidently deleted them thinking they were mods
Verify game files in Steam.
What's causing "Anyone else suddenly getting "unable to join, game is in progress" error when looking for public game matchmaking? I'm not the only one currently affected by this...
Is this a good enough pc, i dont know How to read it.
That doesn’t show what kind of gpu you have
is the vest bug fixed yet??? or is it still broke
You will have to clarify what you mean
its been an issue since the new version dropped when i got to my vests i cant equip anything besides the stab vest
theres no light vest, heavy vest, just no armor and stab vest
i think i brought it up a while bac
ive reverified, reinstalled, deleted all my mods, nothin works
You have two mods that are conflicting that give you more slots than default. The fix is to uninstall one of them. Follow the uninstallation instructions in #❓modding-faq-archive to fully uninstall mods.
would extra mags conflict with it?
If it gives you more than 10/15/13/11 slots then yes
You have two mods that modify slots. Which one you choose is up to you
alright ill go take a look thanks, brb
Anyone notice that the game is crashing discord? It only happens when I have the game open so Im assuming it's somehow related.
I haven't had that issue; perhaps you just don't have enough resources to run both
how much ram do u have
32GB
My game won't go back to Vanilla after I unsubscribed from a SW4T or Not map on mod.io, still on modded even after re-installed it
How can I fully fix
free disk space?
Yup not close to being low. Not sure exactly how much immediately off hand
Is this a good enough pc, i dont know How to read it.
it appears to be below recommended specs, this games does not run well on older cards
So i should not buy it?
I personally wouldnt
Most certainly
I dont know. But the game's optimization is pretty rough at the moment. I dont think it will run well at all.
Okay.
Guaranteed black screen crash on launch
aww
Last time i checked (i have a second system with an older card) even tho the i7-10700k has no problems at all with the card (i believe it to be a 700 or 900 series card) i just had a pretty nice slideshow instead of a playable game
Awww:(
hey does anyone know something about having problems with in game keys that dont work, because i can walk but i cant equip my night visions, cant scope cant even shoot cant yell for compliance so what is the issue?
Hello, I have a problem. Every time I enter ready or not, the lobby loads, then I choose any mode (I tried each), after loading I can move around for a few seconds, and then it crashes and a crash report is displayed
hey u can just buy a rx580 if u saved up a little, drivers are kinda old but it worked for me until i upgraded my whole pc, also check if your cpu would bottleneck with it
clean your keyboard especially if its mechanical, also try resetting your binds
Hey all. I'm experiencing continuos crashes while playing the game. The crashes seem to happen at random times as they differ (mission select, mission countdown, entering the station). I have verified all files, uninstalled and deleted all files, and re-installed it too but no improvements. No mods installed since the re-install. Please advise.
Just asking, would my game crash if my ram is too low to load the map out fast enough?
If you have at least 16gb ram and pagefile then it's shouldn't crash
These are my specs:
Processor 13th Gen Intel(R) Core(TM) i9-13900H 2.60 GHz
Installed RAM 16.0 GB (15.7 GB usable)
My game isn't updating in steam. It says that it needs to update and when i click update it just does nothing.
What gpu, how much vram, did you set pagefile?
How do I check this?
Pls use google and find out, then return, so we can help you
How much should I set the virtual memory to?
16384 for both
After this the game should no longer crash
Any error?
this is all I get
You haven't said which gpu you use and how much vram it have
Is this it?
Go to %LocalAppData%\ReadyOrNot\Saved\Crashes find latest crash file, open CrashContext.runtime-xml with notepad and find ErrorMessage, what does it say?
<ErrorMessage>LowLevelFatalError [File:Unknown] [Line: 684]
pResource->Map(Subresource, pReadRange, reinterpret_cast<void**>(&pData)) failed
at E:\BuildAgent\work\9d4e2b5d528cc65b\Engine\Source\Runtime\D3D12RHI\Private\D3D12RHIPrivate.h:1181
with error DXGI_ERROR_DEVICE_REMOVED with Reason: DXGI_ERROR_DEVICE_HUNG
</ErrorMessage>
Did you try start on dx11?
why do me and my friend get low fps on nvidia cards and my buddy with AMD works fine with no fps drops and 120fps, also my graphics card and cpu are on 50% usage
Just done it and seem to be ok so far. As I don't understand the error, what was happening?
dx12 have some problems on some cards and will just crash. it's not only game actually with such problem. Maybe void will fix it somehow
What nvidia cards and what dx you use?
Great thank you for your help.
i tried both dx 11 and 12 and i am on 4070ti
And what fps you get on dx11 and dx12? What cpu you use?
Game has crashed again twice, tried also DX12...
Can you see error?
<CrashType>GPUCrash</CrashType>
<ErrorMessage>LowLevelFatalError [File:Unknown] [Line: 684]
hr failed
at E:/BuildAgent/work/9d4e2b5d528cc65b/Engine/Source/Runtime/D3D12RHI/Private/Windows/WindowsD3D12PipelineState.cpp:842
with error DXGI_ERROR_DEVICE_REMOVED with Reason: DXGI_ERROR_DEVICE_HUNG
</ErrorMessage>
it's dx12, find dx11 crash file
<CrashType>Crash</CrashType>
<ErrorMessage>Unhandled Exception: EXCEPTION_ACCESS_VIOLATION reading address 0x0000000000000728</ErrorMessage>
Do you use dlss by any chance?
No clue to be honest
Also, make sure game use dedicated gpu, not integrated graphics
Nvidia control panel -> Manage 3D settings -> tab "Program Settings" -> add Ready or Not(ReadyOrNot-Win64-Shipping.exe) -> go to "OpenGL Rendering GPU" and change from "Auto-select" to your dedicated GPU.
Max 60fps on dx11 and dx12 without vsync? Right?
yes
Drops on all of them, or only on specific one?
i played the most on 11 but happens on both system the moment i join friends game and you land in headquarters i am on 45 fps
then if i go to training grounds the fps goes down
i tried optimizing the settings via nvidia application because it seemed to work for some people but not me
What if you go practice mode? Can you screen fps you have on dx12 exactly right after you spawn on PD? Do you use any mods?
no mods vanila game
i just launched practice and it says i have 150 fps but it is choppy
Pretty sure it's just compile shaders while you walking, this is big problem of dx12 right now. That why it's choppy
ok its smoother now in ''practice'' and the GPUI usage is 70% now
How much vram you card have?
12gb
what usage of vram you have?
i guess that direct x 12 was the answer? this is from multyplayer lobby i am hostzing
so it's ok now?
Can anyone tell, how reinstall game and don't loose achievements?
yep i guess, the usage went from max 50% to ''uncapped''
Good. dx11 is unplayable due to fps spike bug and cpu usage problem
me and my other nvidia buddy went to dx11 because of random crashing the first day
You mean customizations?
Yes.
Go to %LocalAppData%\ReadyOrNot\Saved and copy SaveGames
Why reinstall actually?
ty for help invisible perrson 🙂
#❗known-issues-and-fixes message
In this message, saying that old save files is... a... m...
Not working correct.
then you need delete saves files, not reinstal game
try delete them, but backup first
Ok.
Thank you!
can alt-tabbing the game while hosting cause crashes?
is the game known for that? I wonder if I should play in Window Borderless when Im hosting 
If you on dx12 then you already use windowed borderless mode by default
maybe automatically, there is significant alt-tab lag if you put it in (real) fullscreen on dx12
but overall, fullscreen is often recommended for maximum performance
You sure you play on dx12? There are only 1 frame of black screen when you altab on both dx11 and dx12 on fullscreen
yeah, MSI Afterburner reports DX12
Try windowed borderless then, there is no diffirence in fps or input delay on my side.
Idk why but my game keep freezing in loading screen after the police hq countdown for the hospital mission, the “send crash report” program then pop up but game still take up lot of ram. This map did load successfully in first and second but failed to load when I retry in the third time. Should I keep waiting for it to load or sth?
How much ram and vram you have on board?
Ummm… 16gb ram on a samsung laptop
And how much pagefile you set?
I set graphic to low
Ideally game need 32, but with pagefile it's fine on 16
Can you link full laptop specs, gpu, cpu?
do you have anything running in the background when running the game?
I have 16gb and cant get my game to eat more than 80% RAM I think
well... im not sure. Can you set you pagefile to 16384 and try play again?
Ok thx
You don't have dedicated gpu? I just don't really understand screens
see only integrated
Default one from samsung
can anyone help me?
Who you try to join?
friend
Ask him disable checksum in settings
thanks ❤️
btw is a too small page file known to cause problems with the game?
Sure, for all games
You should not never disable it btw
Hey guys, I´m still running version 40173 (dec 17 2023) and there´s no update on the steam page?! Do you know how to fix it so I get the new update?
opt out of the test build
Thanks 🙌
I can barely hear my teammates, when using VOIP. "Team" sounds fine, but "Local" is very very quiet.
What to do?
Hey guys. I'm running the newest version with only 2 mods installed which never gave me any problems. Today, i tried to run the map Rust Belt in commander mode, and it just gets stuck on the loading screen with the "Modded map/no baked data" notice. I found solutions on the reddit page but can't find the supposed location of the documents im supposed to delete?
Just let it load, it is a known issue
I need help, my game keeps crashing when i launch it after i added some mods. i uninstalled the game and it did nothing and it still doesnt work
i did that and it didnt work
i deleted the ready or not folder and all that
Follow the mod uninstallation instructions in #❓modding-faq-archive . It sounds like you subscribed to a mod.io mod, so you need to unsubscribe and follow this listed steps or it will keep downloading itself and crashing your game
didnt work
is this supposed to be like this
i pressed reset to defaults too
Run the game in safe mode, if it works then you didn’t uninstall the mods correctly.
If it doesn’t, then mods are not the problem
Hello i have not played ready or not in a while and the folder on my pc is nearly 100 gigs.. if i delete the file folder will i lose everything or will the cloud save it?
Would like to know just in case if i decide to reinstall the game will i still keep everything or will it all be lost if i have deleted my file folder
Im not sure, but how the hell is it 92gb? mine is 59gb and I have like two mod maps, if you go to the installation folder -> ReadyOrNot -> Content -> Paks, how large is your Paks folder? @grave oyster
Custom maps can easily be over 1gb a piece
The paks folder is like 80 gb but i have no mods it's just Windowsnoeditor
I don't even have the game installed which is the weird part
these files are huge..
I'm having trouble getting any mod to work. Can anyone help me? I've tried manually installing via Nexus mods like I usually do, but nothing works. I'm trying to use a few gun mods and the Samuel Jackson mod.
Gonna get rid of it.. not sure why the default Windowsnoeditor pakchunks are so large though..
Opt out of the supporter alpha on steam. Those are the old files before 1.0
Are they safe to delete?
Yeah, you basically have to redownload the entire game anyway cause they shuffled everything and reduced the file size
I have two directorys of Ready or Not. One is in a seperate steam folder which has the mods i previously used
And it is way less size
Oh delete those as well. They won’t work with 1.0
Only about 760 mb
bump
So turns out i have encountered some sort of odd glitch that occured with 2 of my games: Ready or Not, and Halo: The Master Chief Collection, i have them saved and cached in one Steam folder, containing all of my previously installed games. Halo in that folder, the currently installed ver. was 82 gigs. The Ready or Not folder was only 726 mb since i don't have it currently installed. I guess either when i installed both of the games about 1yr ago, (2/16/2023) they were accidentally saved to a seperate folder on Steam and were just gathering dust since i was never actually utilizing either game. So for about a year now, i have had almost 190 free gigabytes just laying around the entire time because the games were never actually used. Both folders were 80-100 gigs large and were just taking up space..
So i had two of the game vers that were not space-optimized and just laying around, so i had two versions of both games which just caused more bloating
Well that’s a separate steam issue, not an issue with this game
Follow the instructions in #❓modding-faq-archive for installation and uninstallation. VO mods are installed differently, follow the instructions on the mod page. But if any of the mods are from before the 1.0 release they are significantly more likely to not work.
Def checked that first. I did everything correctly but to no avail. Your last sentence might be the answer. I most definitely followed the instructions. I've been modding games for almost 20 years, so I get it. But I can't get any mod to work in this game. I'm just wondering if I'm doing something wrong compared to other games.
Are you putting the directly into the Paks folder? The mods~ or mods folders will not work properly
Also mod.io subscriptions often do not work, and vortex is hit and miss so it’s better to not use it
Yes to the first. And I'm manually installing via Nexus mods.
Okay well then make sure they are at least from after December 13th, preferably from after February 6th
The devs redid the file structure of parts of the game so old mods won’t work. You’re lucky they aren’t crashing the game on startup to be honest
Ah! last update to all of my mods is late Dec 23. Makes sense now.
Im playing with my friend right now and am having massive latency issues
this hasn't happened before and has been continuing for 30 mins
Having a hard time trying to play with friends, game friends game just keeps crashing whenever we launch the mission. We’ve removed mods and it’s still happening, any insight would be great.
How do I enable full reflections or fix this silhouette thing because this happens to every reflective object i see
Unfortunately the reflections seem to be how the devs want them to be, so we have to deal with it
The only way it's fully disable reflections. Im sure void can disable player being rendered on some objects, idk why they still last after disabled mirror.
The render-to-texture reflection option was removed and the thing you see is a result of how Screen Space Reflection system works.
sorry for the late reply but then what is the problem?
ive been trying everything for the past hour deleting folders and verifying stuff
and it keeps crashing
only safe mode works
hello everyone, I play RON with a friend but for the past few sessions he started using mods and I think the mods keeps crashing my game. Every time when loading into a mission my game crashes but his game works fine (he's hosting), I asked him to disable the mods because I never had issues with the game before that, but he refuses because he says the game isn't fun without them. Is there anything I can do that might solve this problem?
You need to follow the steps to get rid of mod.io mods.
i did follow the steps
i pressed the button thing ingame and it did nothing
you need to also unsubscribe to all of them, then push the button, then delete the files
ive checked ingame too
ive literally done everything in #❓modding-faq-archive
a) Navigate to C:/Users/Public/mod.io and delete the mod.io folder if it exists.
b) Navigate to %appdata% > local > ReadyorNot > Saved > Paks, and delete the paks folder if it exists. (If you delete anything else here other than the Paks folder, you will be deleting your save data as well so be careful)
c) Navigate to steamapps\common\Ready Or Not\ReadyOrNot\Content\Paks and delete the mod.io folder entirely, and the mods~ folder if it exists. After that you should only have PakChunk0 through 20. Anything else is a mod.
dude i notice that the mod io folder keeps coming back with some folder in it called 3791
it has like metadata and then state.json
i delete it and then it comes back, but everything u said didnt work
anyone know where the settings config file is located?
Same place as any other unreal engine game in %LOCALAPPDATA%
ah that's useful to know, thanks
Have you done all of these steps? You will have to backup you save files (C:\Users......\AppData\Local\ReadyOrNot\Saved\SaveGames to another location, because this method will delete it and your progress in the game if you do not back it up)
Method 2- Administrative Automatic
-
Right click the game on Steam, click "manage", then open local files
-
Click and open Engine > Binaries > Win64
-
Right click "Crashreporter.exe" and hit "Run as administrator"
-
Hit clear mod & save data, allow it up to 20s to do so.
-
Launch the game
Method 3- Manual
-
Right click the game on Steam, click "manage", then open local files
-
Click and open ReadyorNot > Content > Paks
-
There are 21 core files with "windowsnoeditor" 0-20, do not touch these.
-
Delete anything (including the mod.io folder) that is not one of the 21 files.
-
Type into the top directory bar of file explorer, "%localappdata%"
-
Delete "ReadyorNot"
-
Verify the game files
-
Launch the game
It is important that you do every single one of these in order
Hello guys, i cant get the Hotfix #3 patch, ive already reinstall the game in the base version but when i run RoN on DX12, DX11 the game doesn't have any new feature like the SWAT AI fix, the disable/enable demo replay option or any feature of the Hofix #3 patch, can anyone help me on this
Opt out of beta branch.
Restart Steam if it didn't update.
Also post your game version (Main Menu, upper right corner)
CL41630 is latest
Well you have mods so that may influence what you are looking for.
Which features are you looking for anyway ?
any features from the Hotfix #3 patch, cause i got none
Hey guys! Does anyone know if PS4 controller works with RON?
RON does not explicitly support any game controller other than Mouse and Keyboard.
So to get any of them working, you'd have to use SteamInput and map buttons and analogue sticks to keys and mouse cursor.
Feel free to be more specific if you are looking for specific answers.
for example i want to have the open doors command for SWAT AI, because when they're stacking at a closed doors, i can't use the "Open door" command, it doesn't light up like the others command
and i don't see the enable/disable option for the demo replay section
Thanks for your reply! I was just watching a video on youtube about controller layout guide but the guy was using XBOX controller and someone commented that it doesnt work with PS4 controller! I just want to be sure if I can play with PS4 controller before I buy the game
SteamInput works with any common controller of XInput type (Xbox) as well as DualShock 4 (PS4), DualSense (PS5), some Nintendo joyycons, Steam Controller and so on.
Thank you! I'll give it a try
Main Menu > Options > Gameplay > Replays (almost at the bottom) > Record Replays > Disabled/Enabled
okay i've just test the game, its okay now, thanks for helping me
In a typical UE4dev fashion, the settings toggle is wonky and sticks to one value if you reboot or change sessions.
So it might be just that.
Man that sucks I remember they had it during early access 🥲
It was causing far too many issues iirc.
Besides given how bloated their scope already was, they probably cut down on features and re-focused on the single player experience first.
Hey guys, I recently purchased ready or not. Since then it just shows me the black screen, I know I can run the game, I am 100% sure, I have tried EVERYTHING, My drivers up to date, windows is up to date, reinstalled, file integrity is fine, turned off the antivirus but nothing and tried both Direct 11 and 12. Does someone know what to do?
PC specs ?
I dont know them very well, but I am 100% sure I can run the game, it shows me the ''ready or not'' thingy before the blackscreen, I don't know what to do.
Post basic specs of your PC and if you have old Nvidia GPU with legacy driver that is by default below minimum hardware requirements then the only known workaround is to disable NGX feature set (DLSS and whatever else the engine has) via "-ngxdisable" command line switch.
Alright, I think it's my NVIDIA Card, everything else as I see it is perfectly fine, well I guess I will have to wait a little bit
Hello can someone help me
Cause when I try to play mod map, the game crash, even I try many times
But if I play other mods like (gunfighter)
It is totally fine
Tearing my hair out trying to figure out what's causing this
can anyone help me install voicelines? Cuz i fucked my files and now Judge is a mute
Anyone getting hit with memory errors with this game?
the game keeps crashing
i did this
didnt work
Anyone elses game crash all the time?
hi
when i want to find an server it says "Failed to find an server with an acceptable ping"
nobody is hosting anywhere near you
and what i should do
Disable server side checksum, but nothing else other than trying to play at different times of day. The max ping it looks for is 250, so you won't be matching with the entire world
I don't know what else to tell you. You are not deleting a mod file if nothing has worked for you. This is the only cause for safe mode being the only one that works.
When I start ready or not the game becomes fully black and doesn't work anymore
I have an Invidia GeForce GTX 1050
Windows 10
For some reason it is taking multiple hours to validate my files
Fixed, added the -ngxdisable to prop.
This is an issue with steam, not with the game. Steam behaves along these lines with a number of games.The only thing you can do is be patient and if it gets stuck for a long time then reset the download cache in the steam settings.
Ok thank you
i can ONLY use the glock secondary, wont let me pick anythign else
Your mods are broken
i had vortex uninstall and verfied game files😭
check ur gpu drivers
ptsd flashback is starting /s
The cause is that you have at least one mod that has not been updated for hotfix 3 that modifies the weapon/item list, for example gunfighter or a weapon replacement. You need to update the mod, uninstall it, or run the the game in safe mode to be able to swap weapons
Many have been updated already so that’s probably the fix
i cannot seem to join anyone through discord for some reason
So I completed rust belt with just the .357 and some flashbangs, did I miss something? How come the achievement didn't trigger? I did this on commander mode and made my officers stay at the start
I just had an AI mirror a door, say nothing about traps, have no option to disarm trap - and then order them to open the door and they all die to a trap. WTF?
i need help my game keeps crashing on direct x 12 and 11, ive done everything in modding #❓modding-faq-archive too
For the "use only" acheivements, spawn and swap off primary immediately. You cannot use or pull out: NVG, any long tactical, wedges, anything not listed on the achievement that requires left clicking, or the multitool. Your swat using rifles does not matter (and is in fact how you deal with most of the suspects), but I would recommend not having them do anything other than hold, stack up, cover, follow, enter and clear, open and clear, or kick and clear, and search and secure
Validation is bottlenecked by single CPU thread and disk I/O performance (as in, speed of your PC).
Also, if your antivirus decides to start checking the files along with Steam it tanks the speed as well.
Out of curiosity, are you stuck on legacy driver ?
Latest is like 551.53 or something.
I still dont see the supporter key in settings
I can’t get into the supporter discord. I forgot to join when I got it xD I can’t find the needed verification in my game options?
What's going on here..
everytime i launch the game it goes into not responding and ive verified files
also literally any modded maps even the new ones don’t work and freeze and crack my game
Hey, not sure if this is the place.
But recently redownloaded RoN and cant seem to play at all. I had the FSR plugin not found bug, somehow managed to fix that and now as soon as i boot into Commander mode, my game just crashes. I've reinstalled and verified game files multiple times.
There's a supporter edition discord?
I got the supporter edition, how/ where do I send my code
I figured it out lol
Someone in the lobby is using a mod to be able to use the m249 or rpd. They break the character models and lag the game for everyone else
Follow the uninstallation instructions in #❓modding-faq-archive . Any maps updated before February 6th/hotfix 3 may cause they game to crash or hang.
Also avoid mod.io subscriptions for this reason, since they reinstall themselves unless you follow the listed steps
I have already met such people several times, it is very annoying
but playing with checksum is even more boring
Cant play game. what do i do
i need help my game keeps crashing when i launch on direct x 12 and 11, ive done everything in modding #❓modding-faq-archive too
Keep Calm and Carry On
does it happen like right when you open it or rarely
no everytime. i cant open at all
for some reason all the character flick from invisible to normal right when i installed amd driver's now when i reloaded it it just crashed at the main menu
same just started rn
do you allso have amd drivers or nividia?
wait i think its working. google said to verify something on steam app and now it says downloading contnent
right click the game > manage > properties > installed files > verify integrity
in the middle of tryng that
once im done if it works il ceck if i have another bug
right at the screen
just crashed right at the start screen
it looks like you have mods, view the pins and remove them
go back to paks
Select paks
Scroll down
No
damn then what
allright the safemode worked but for some reason it crashed when i loaded in the game and some assets were bugging out like legit eaven infroont of me they were just changing from invisible to normal
is it cause i installed teh new amd driver?
No, you have a mod somewhere breaking things, view the message above about how to remove them
wait but im playing on safemode how?
safe mode completely disables the mods
Correct
and tehres no opencrashreport
but then how are they breaking the game then?
It is likely in a location that isn't setup for the safemode feature if it breaks even with safemode on, likely a pre1.0 mod
oh damn yeah it could be that sould i just reinstall the game then?
cause i wouldnt be able to locate it and the ready or not cleardata wouldnt clear that mod
sould i just uninsall and reinstall?
or do i just delete some small files and verefy integrety and let it redownload them?
Go to %localappdata% and delete "Ready or Not", you may lose your save progress like skins, maps, etc
i seriusly sont care about my save progress and skins
FUCK
ok sorry for deleting i had my name there
ok so waht now do i just relaunch it and its gonna make me reinstall stuff oir do i verefy integrety?
Verify and then launch
sooo now back to the crash thing i opent the game in safemode on traning and it crashed right when he stared talking like 10 secconds in it just frooze but he kept talking
it could probably be cause i have 8gb ram
and im overusing it
what do I do here??
never encountered this before
Nevermind, I think this explains a lot
everything keeps dissapearing and apearing
why would this happen it just started when i updated my drivers
im using 22.6.1 verion
its teh latest version of radeon for my r9 280 series
@exotic vapor based on the video, you have mods still.
@vague flame go to the lockerroom and go to the first locker. Then click on top and make sure you are looking at loadout, not customization, and then click self and swap between the team.
Wrong dc
What do I do to be a supporter of the game? and have the supporter edition version
I bought the supporter edition dlc and I still don't know what to do to enter the supporter server. I don't know what command and how to find the supporter code
When I write the command based on my friend code in steamid and then my build number in properties ready or not with the supporter version selected the bot still says that it cannot verify me as a supporter
and there is nothing like copying supporter code in my settings gameplay ready or not as it should be
view the verification channel in the discord
If you do not see your code in settings, you need to opt out of the test branch, because it is not being updated
how do you do that
I can't find the verification channel on discord
how to leave the test branch
OK, I'm on this discord but how do I get the supporter edition ID to send it to the bot? I couldn't find it in the game in the supporter edition version
Opt out of the test branch in game properties
the game keeps crashing as soon as I open it. it works if I run it on safemode, but normally it doesn't work. I deleted all mod data and verified the game files but it still crashes instantly
^
Follow the mod uninstallation instructions in #❓modding-faq-archive . You still have to delete the mod.io files after you unsubscribe.
It only working on safe mode means mods are the issue.
Ok, my friend and I are brand new to the game. We are having a hell of a time joining into a private game. ANY ASSISTANCE would be greatly appreciated. TIA
deleted everything, still crashes
Follow every step in order. If you crash you missed something
Could you be more specific ?
Is your antivirus blocking game files ?
is there a download speed cap when downloading mods in game?
No there normally shouldn't be but I don't recommend downloading from in game it tends to break things.
yeah my game kept crashing so im just doing it manually, but when I did it in game the speed wouldnt go higher than 3mb/s at all, and i have a 15-20mb/s download speed
@rustic laurel Can I get some help with my game?
Im not know
should I remove the antivirus?
guys how do you fix no animations when you use a modded gun and press f
попробуй через впн и проверь есть ли свободное место на диске
касперского точно лучше удали
уже все решилось, но всеравно спасибо
впервые вижу русского среди usa buddy
их много, просто шифруемся
yeah thats the issue you have 3gb vram and trying to run a game that makes cards with 6 struggle
Amount of ram, vram, pagefile, also what cpu you have?
virtual memory
Set it at least to 16384
Your vram is also low for game, make sure you have disabled hardware acceleration in discord and browser, if they are opened while gaming, they eat some.
where tho
i am on win 11
Where is that setting
the game took all my ram by one
how can that be right
every map works just fine
just press win+r then and type sysdm.cpl ,3
like this?
when I update files the game still downloading but not changes, I can't play and remove it too, I can't
I can't hear dialogue or voicelines in game, but I can hear gunshots, explosions, menu audio, music, all other stuff
See pinned messages for how to remove obsolete mods.
Is your antivirus blocking game files ?
is your disk full ?
@mossy bear you have broken mods
Since the last update I cant play on direct X12, game keeps crashing after about 2 mins. Any ideas how to fix? this is the same problem in all game modes regardless. I don't have this problem in X11... Please fix!!! I am getting huge latency issues in X11 which I didn't have before th update as well. Makes the game almost unplayable.
I'm trying to have the game in borderless fullscreen but only 2 options show up
also while tabbed into the game, logitech mouse software bugs out, forcing the mouse into default buttons
I got the weapon changing bug, is there a solution, or am I stuck w/ a pepperball gun
Has anyone had all there missions scrubbed? My pc crashed and restarted at the beginning of a missions now all the ones unlocked are gone. This happen to anyone else? Ive downloaded some mods idk if that was a cause. Just annoyed i have to redo everything now
You have at least one mod that modifies the item/weapon list, examples of gunfighter or a weapon replacer. Update the mod(s), uninstall them, or run in safe mode temporarily to be able to swap weapons.
can someone help me out with fps, ever since the 1.0 update i went from getting over 100 fps consistently, now im always at 20-40 fps. graphics settings haven't changed. i have an rtx 3060 ti, core i7 11700f, 16 gb ram
my modded maps keep on crashing, does anyone know why? only some work
Any map that had not been updated since hotfix 3 might crash, with pre 1.0 maps being almost certain to crash
Ron eats up ram in my case, idk of a solution other than buying more ram
something i noticed for me was that the game was using up 100% of my cpu, but less than 10% of my gpu which i find weird
Hello I really need your help 😦 I don't understand why on this map the blood is white.. ( mission : Carriers of the Vine ) NO MOD active.
Recorded or Not - White flashing. I know how to replicate it but not how to fix it. There's 2 pak files. Wet and Dry Pak. Wet pak has bloom and fog, the other one removes it. I can't use Dry due to the textures in game flashing white. Wet works fine but you have to use fog... Any workaround for this?
any idea why my replay options setting keeps getting reset? every single time i open the game i have to manually turn it on
PLEASE FIX THIS GAME!!!!!!!!!!!!!!!!!! my hands are 10 meters up the screen. a restart doesnt do anything only a unninstall and reinstalll! i have to do this every day!!! FIX PLEASE!
Did you disable reflections?
I try that give me 1 minute 🙂
Ok, i see the problem. There are some problem with ssr and lightmaps on this map. You can temporally fix this with r.ReflectionEnvironmentLightmapMixBasedOnRoughness=0 command in engine.ini, just be aware that it's can mess up with some surfaces that can reflect light.
engine.ini is in a folder ? I really want try this. Because I create a movie on this map ! Thank you for your help
%LocalAppData%\ReadyOrNot\Saved\Config\WindowsNoEditor open Engine.ini and paste this under bottom
[/script/engine.renderersettings]
r.ReflectionEnvironmentLightmapMixBasedOnRoughness=0
Blood will looks like this with 0 value https://i.imgur.com/kbczYLD.png
It's not in game folder
Oohh I find ! okay I try 👌
It's this one? It's just "Engine" and not "Engine.ini"
yeap
maybe the wrong place to ask but.....I got the steam acheivment for completing the game with no officers down but didnt unlock the watch. i was in ironman mode
Did one of your officer get fired, resigned or leave? That matter too
might have resigned after executing pedos. but i got the steam achievment?lol
Achievement counts only dead officers i assume, because i get hermit too, but i got all officers resigned due to crisis after last mission
Thank you
now the corpses look normal 👍
Windows hides file extensions for no real reason by default.
Hy guys i have restored my save game file with steam cloud but my character customisation are locked how i can unlock them
so i'm stil unable to take off the gasmask and i'm not sure which of the steps in the pinned messages i'm supposed to follow since none of them seem to fit this problem (i may just be dumb)
Try changing the loadout preset
You had a mod (gunfighter likely) that allowed you to put facewear in the tac slots. As AVP said you can change presets to one that doesn't have it, or reinstall the mod to fix it.
preset didn't work so uimma try reinstalling the mod ig
btw talkinga bout gunfigther, did they fix the compatability yet?
A week or two ago
ah nice
cuz i saw a bunch of different new files on the page anmd assumed it was hotfixing stuff until a new all in one version came out
The author put out a fixed aio already
damn i'm just hanging behind ig
does anyone know if uninstalling the game will delete my repllay folder?
Just manually delete it
%localappdata% > Ready or Not > Somewhere in there called demos
i dont want to delet it though
I'd create a copy of the folder and move it then to be safe, I'd imagine that uninstalling will perma delete it
im having an issue where RoN is barely using any of my gpu, and im getting really bad fps. When im playing im getting a steady 20-50 fps. and im at 100% gpu usage and less than 10% gpu usage. I have a 3060 ti and an i7 11700f
Check the experimental pins
what?
My Ready or Not isn't recording any replays. Every time I do a mission it won't make a replay.
You have to enable it in settings, there may be an issue where it doesn't save once you exit the game (the setting)
sometimes i open the equipement and the game crash
when i want to edit my equipement
Remove any mods and try again
guys my game just stutters more now compared to before 1.0 release
my pc could run this game 70-90fps stable before release
Switch to dx12
is there anything i can do to fix the stutters
Describe your whole pc and on what settings you play
And what dx you use?
i play on high texture and low everything, I have a Ryzen 3 3200g GTX 1660S 8x2 2666hz ram
i would like to know whats recommended cus some people say dx12
some say dx11
this setup used to be able to run the game 60-90fps all the time before the 1.0 update
dx12 for sure, It takes some of the load off the processor so it will load gpu more
should i just lower all the textures? cus if freeze even in the mission selection screen
Texture quality does nothing right now, all setings from low to epic change texture poolsize to 3000
which is a lot for your gpu 6gb
so you mean its just a cpu problem at this point?
idk, you need test deeper, what cpu, gpu usage, how much vram game use
ill check the task manager while im using it then
tried both dx 11 and 12
some say dx11 stutters but doesnt freeze alot
you can try one command and if it's will fix stutters that it's vram issue
go to %LocalAppData%\ReadyOrNot\Saved\Config\WindowsNoEditor open engine.ini and paste this under bottom
[/script/engine.renderersettings]
r.Streaming.PoolSize=1
If it still stutters then it's mean that something else cause it, shader compile, ram problem, game on hdd instead ssd
How you start game?
From steam or just from desktop?
like this?
yeap
steam
What if you try start game from folder instead, SteamLibrary\steamapps\common\Ready Or Not\ReadyOrNot\Binaries\Win64 and start ReadyOrNot-Win64-Shipping.exe
Just to make sure it's will be on dx12
tried that before didnt change anything
Any mods then? Did you clear them?
Idk cuz I use epic/ high textures with 16 GB RAM , a I5-11260H (11th gen) and a 3050 (4GB) (i use a laptop cuz i travel alot)
And still get like 60/80 fps
lmao this is how my game looks like now
It's what you get when you set texture streaming pool size to 1MB when most texture atlases are larger by orders of magnitude.
if never streams in higher quality MIP levels.
If your game stutters due to streaming, move it to an SSD
already is in an ssd
sata ssd not a m.2
yeah i cant play the game anymore it seems
too much stuttering on my end even though i use 100% of gpu and cpu already in a ssd aswell
arond 3-4 months ago i could play it no sweat
Game need more than 8gb of vram so it can stream textures without constant flushing textures and load a new ones .
There are too many textures, that in fact, do not need to be used, because the player will not even see them in actual gameplay. Void really need to remove them or optimize somehow
guys? how high spec do i need to play this game with wqhd 165hz with full option?
You have to be more specific.
if it is crashing on launch, remove your mods.
does anyone know what AA method Ready Or Not uses?
TAA is pretty much the default now in UE4/5, so the answer is going to be just that.
I thought TAA sucked
ah shit, here we go again
what did you guys say you're supposed to do when you get that no space update thingie, I know someone suggested me something other than reinstalling last time but I kinda pulled the trigger a bit to soon on that one.
no space update thingie?
basically, you have more than enough space to update the game but when you click on update steam tells you there's no disk space
this happens with Ready or Not and some other UE4 engine games as well apparently
maybe try clearing download cache? https://help.steampowered.com/en/faqs/view/6AD7-820D-8BE5-E51F
Alright I'll give it a shot
default is for sure, but you can enable 5 gen taa via r.TemporalAA.Algorithm=1 command, use bit more gpu power but looks much better
I found a way to force DLAA in the game @scarlet narwhal I think I prefer this over the TAA
Yeah this worked, thanks.
Alright. For me dlaa looks much worser then just taa
oh nope
neeeeeeevermind, started downloading and then stopped again :c
ah fuck It I'll watch a movie while it downloads
You are suppose to actually have the disk space. That's the fix, it's that easy.
TAA is basically the only thing we get in any modern game other than upscaler magic.
It has ghosting problem in certain situations depending on how the dev set it up.
I noticed that default RoN AA, if its TAA has less ghosting than DLAA
It's very much noticeable in certain situations when looking at carpets or fine structures like that.
It ghosts like crazy.
RoN is a game where I cant tolerate any ghosting at all for the laser at least
Optimization tips? Can be at stable 60 fps at some points in missions, and itll drop down to 10 - 20 often other times. I know it's early access, it's not a complaint, it's a request to be able to enjoy the game more ❤️
Download the latest patch
okay lol, it's downloading now ❤️
I haven't even seen the prompt for hotfix #4. My buddy is downloading it on his copy and it's just stuck at 0% for him and he can't launch the game through Steam. Was the patch pulled?
You are either opted in beta branch, in which case, opt out of it, or Steam is scheduling updates for you, in which case restart it to get forced update.
As for your friend, he either has no disk space t update the game, or has a slow disk and is being impatient.
I'm not in beta; restarted Steam a few times; buddy is at least on an SSD with enough free space to download the game. Still not sure what's going on.
He's trying a reinstall. Weird. Steam saw that there was an update and it was just forever pending. Game is redownloading though.
trying to download an update and its saying this? Can anyone help me please
That happened to him, too.
Your antivirus is blocking files or some other app (or the game) is using the files at this very moment.
Ah, maybe I misunderstood him. He got a busy error when trying to uninstall and start fresh. Update was just forever stuck at 0% but the reinstall is going along.
"Busy" means you are trying to do something you are not suppose to when you already have a problem that you didn't take care of :3
If it is stuck it's either because it's blocked or because the disk is too slow (in cases of trash SSDs it's DRAMless drives that are basically dead in the water when comes to installing a patch).
Weird that it only started happening with this patch, though.
hey bro do you know how i can prevent my anti-virus from me installing this update - or recover the files from this? much appreciated .
Consult user manual of your specific software, whichever antivirus you have, i would have not known.
i fixed the problem i just had to close steam through task manager and open it using 'run as adminstrator' I appreciate your support though. 😄
If you need to run Steam as admin, you have another app which messes up the files with higher priviledges than Steam.
So you still didn't fix the problem.
Running Steam as Admin also has other implications and is generally not recommended as a long term solution.
Hello I need some help. The update completely broke the game for me. It was stuck updating and no matter what I did i couldn't even get it to stop downloading. It would just get stuck at "stopping download"
then i tried to uninstall the game and same thing. Stuck at "uninstalling"
Then i manually deleted the steam folder and the game is still in steam even after I deleted it. Its still trying to download the update. And I still can't uninstall or do anything to get rid of it.
Any help would be appreciated.
hello, can i help me ?
Restart Steam and/or your pc
Log out on the top right, close the game, and try logging in
Hey guys. I wanted some help to try to find the issue with my game. I'm running a clean install without any mods and playing commander mode, but since hotfix #3 I haven't been able to play without running into crashes at the HQ or when loading a mission. With hotfix #4 the issue persists. My specs are: RTX 4060 8GB, Ryzen 5500, SSD with 16 GB ram.
This was right before the crash
Previously I was able to play the game maxed out without issues at 1080p
did you update the game
Yes, I am at hotfix 4
does it run any better or not at all
Didn't have any issues regarding performance specifically, but the game will randomly crash
Are there any overlays active
At the moment of testing, MSI afterburner and the nvidia display, but the issue was happening even without those
I just turned them on to see if anything weird was happening
i assume it is installed on the ssd
If it happens again, make sure to add 1. GPU/cpu usage on the crash description. And if you can write a list of your 2. graphic settings it would help a lot. Just make sure to include those in the report.
It would be extremely helpful
As far as solutions go, I am gonna have to check but there appears to be some issues with certain graphic cards, both high and low end.
Will do, thanks for the help!
hello, can someone please help me. I lost audio on the game. cannot hear TOC or my commands. any tips?
i have problem, when i playing coop with my friend on the new added maps (like 23 megabytes or school) when we are loading to the game, me or him got crashed. On every other old map game works perfectly fine
We dont recommend using Modio
How can I remove it?
There is no Sound/My Character is Not Speaking/TOC is not speaking
Go to steam\steamapps\common\ready or not\readyornot\content and delete the VO folder.
Then go into the paks folder and delete everything that is not a windowsnoeditor 0-20 pak.
Then hit the Windows key and type %localappdata%, and delete the ReadyorNot folder.
Verify the game files afterward
my ass can NOT open the mod browser or join friends, when I try to it says "lost connection to host" or something.
please. i need help
My replays are always off by default when I start the game. Even if I enable them the next time I start the game they are off. Is this a bug or a feature?
known bug
went to boot up the game, said save file was corrupted, so steam forced the game to be reinstalled, now steam has validated game files 23 times in a row and counting what do i do
Reboot your PC.
Also is your antivirus blocking the game or Steam in any way ?
i did reboot, and i doubt it, this isnt my first time playing the game, its run just fine before this
and my antivirus scan didnt say anything
i have problem, when i playing coop with my friend on the new added maps (like 23 megabytes or school) when we are loading to the game, me or him got crashed. On every other old map game works perfectly fine
i have problem when i just started game ( even single play) . eventually crash . i dont know why .
crash in 30 second whatever option i choose
I have a problem when i load into the map with dx11 it works but why it doesnt work with dx12 even tho my specs is a 4050 and ryzen 7 7535hs with 16gb ram??
since 1.0 hot fix update my game is crashing..
After the new update?
yes sir
Same here
amd? cpu?
Look up
mine does that on dx12, dx11 doesnt crash (but dx11 runs bad)
yesterday i spent quite a bit of time collecting info, logs, reports for void, so they are investigating that now
Also dlss works better on dx 12 right
I play on qhd
I forgot to specify earlier but my issue also happens on dx12
probably the same issue then, i did good bit of testing yesterday so hopefully that helps them fix it
Oi do you get more fps in dx 11 or dx 12? With dlss
i get much better fps with dx12, drops a lot less too
just that since hotfix3 its been crashing
Yeah on dx 11 i get average 90 fps while dx 12 150-160
Dx11?
Oh i mean 12 sorry miss type
Yeah also turning on dlss on dx 11 for me does nothing
Hbu?
i run better with dlss on on dx11, but it will drop from 120 down as low as 40 on some maps
Really for me is better on dx 12
dx12 is better for rtx40 series.
i ment dx11 with dlss vs dx11 with no dlss
dx12 runs better ofcourse (when it does not crash)
Yeah
Oh
I don’t understand can you repeat im heaving a headache and a nosebleed idk y
lmao
I alr updated
kk
Still no diff
lol
Then just get a virtual cpu
the mother bored doesn’t have a cpu input
i can’t put a cpu in it
every motherboard has a cpu slot for it
no he removed it
It’s just a blank space
Lmao ur pc doesnt run without it so better get to spendin
for some reason the game isn't updating. when i click on the 'resume' button it starts for about a second and then stops, any fixes. other games were able to update fine though
Do you.. actually have enough space for the update ? (say 50+GB free) Is your antivirus blocking the Steam in any way ?
I cant finish my update too, stuck at installing 0% my hdd free space 158gb
Check Task Manager for disk activity.
Then?
If there is any, if the disk sits at 100% use time with no reads/writes, if it is writing something, etc.
I just restar my pc still got the same issue
do you think you can help me with this? I tried but could not find the VO folder. Let me know if we can connect. Thanks!
Get a ssd??
guess i gotta put the cpu in the ram
i have problem, when i playing coop with my friend on the new added maps (like 23 megabytes or school) when we are loading to the game, me or him got crashed. On every other old map game works perfectly fine
Anyone getting some crackling in the audio since yesterdays update?
I got an issue, for some reason when I try to install the new hotfix it tells me I don't have enough space even tho I have like 20 gbs of free space when the update is only 6 gb?
Why does only my safe mode game work??? I validated my game and cleared save/mods data
You still have some mods lurking around.
See pinned emssages for how to remove them.
The problematic of how SteamPipe works has been explained so many times that you can quite easily search for it by now.
A better thought to ponder about is how you not have more than ~20 GB free of disk space. Because that's the actual problem here.
I am broke that’s why
Manage your Steam Library properly, because SteamPipe is what it is and you will need large amount of free disk space to update your games, in general.
Damn didn’t know that
A demonstration what SteamPipe does in a single picture:
https://imgur.com/0YQrk5A
Notice the Steam is actually telling you what it is doing and what the requirement is once it starts downloading.
I'm gonna pretend like I didn't already have 70gb free but whatever
:pt
Ensure both of you do not have the supporter alpha selected in the beta tab under properties for the game
i got it fixed had to update my pc
PC specs ?
What is your Nvidia Game Ready driver version ?
Post the actual version number.
Cool, have you tried to clear %LOCALAPPDATA%\ReadyOrNot\Saved\Config directory yet, to reset video settings to default ? (do make a backup, or move the folder instead of deleting it).
Is the the game supposed to unpack 55 gigabytes for every... patch?
I'm running on a HDD so this is really inconvenient
any idea why my game would be crashing no mods installed but every time it crashes i find a mod.io folder with a random j.son file i delete it it'll run for about 2 minutes then crash again I've manually cleared the game and uninstalled it, used settings to clear mods, started the game in safemode(no mods) through steam as well as x11 and x12 and no luck
Hello guys I cant start any mission in Ready or Not, even in Safe Mode it just crashes as soon as I start any mission in singleplayer
I can provide you with any additional information like system information or other just ask 
I'm getting a weirdo fuzzy blur effect on plants. trees etc. Anyone ever get this?
Open your installed files location, then go to .....\ReadyOrNot\Content\VO
FSR/DLSS enabled ?
DLSS balance yes
Run at native and see if the issue persist.
Upscalers tend to introduce artifacts in some scenes.
can anybody help me with this?
i found out what was cause that issue i had. Motion blur 😦
Yea it looks like motion blur on the video.
You running the game in DX12 mode ?
I tried in DX12 and in No Mods mode
Safe mode runs DX12 by default. Have you tried to run the game in DX11 mode ?
Do you have a graphics card from Nvidia ?
Yes
can someone like.. help me mod my ready or not game :/
There's been an increased amount of DX12 crash reports from Nvidia users lately from Ready or Not.
You could try the blackscreen workaround for Nvidia GPUs with running "-ngxdisable" in addition to DX12 mode. See if that fixes it or not (just my curiosity here).
I have some mods installed on the PAK file but when i go to multiplayer, Its just not there
where do I run that?
here?
Yup, just without quotation marks (though, don't forget the dash symbol).
Play around and see if it is still stable, but it wouldn't surprise me if the latest DLSS would be the culprit.
Been wreaking havoc on SCUM lately.
Nah im not playing with DLSS, I just use it Native
But I will see what works for me in the long run
can someone like.. help me mod my ready or not game :/
I have some mods installed on the PAK file but when i go to multiplayer, Its just not there.
pls?
Which mods are you using?
like 5
they are from nexus
@noble knoll , Could you help me?
You need to tell me what they are
could i DM u the images?
ok
Are all the modded maps broken because of the update. I'm having a hard time getting any to work
Sort by updated date, anything after the 6th of this month should be functional mostly
Remove the -ngxdisable since that is primarily (to my understanding) for people who do not meet the minimum requirement for RoN, the GTX 970, you should be fine.
Try DX11 and 12 after that, make sure your Windows and drivers are up to date, then restart your PC
When i try to play on my steam deck it keeps shutting it down no other games are doing this any ideas?
Then it randomly says verifying installation and turns back on
Steam deck is not officially supported by the devs, despite the playable rating from valve. That being said, others have gotten single player to work so I do not know what the issue is in your case.
What would be better water cooling or fan? It’s for my first pc build (I didn’t build my own first pc)
That usually happens when the suspect is doing a death animation, and afterward you can restrain. Clip is not long enough to see if that is the case
Damn maybe ill try to reinstall its a new steam deck with no mods i just used a comunity controller layout
Its odd because it works at first but as soon as i launch a mission it goes black and does that
Im not sure but after the new update, Im not able to launch RON due to windows seeing it as a PUA, by any chance can yall help me out?
oop nvm RON finally starts to run as soon as i say something
whenever i try to join my friends the game crashes after a few seconds of loading in
it seems to kick me whenever i go above low graphics,
Processor 11th Gen Intel(R) Core(TM) i9-11900K @ 3.50GHz
Installed RAM 64.0 GB (63.9 GB usable)
NVIDIA GeForce RTX 4070
View the pins
How can i have my own textures ingame?
Hi all, there is a problem related to the game, namely the game safe, how do I reset statistics and progress, namely to make it as if I just bought the game? I reinstalled the game, I turned off cloud saving and deleted the safe in the root of the game and nothing helped.
Hi guys, does anyone have issues with non-lethal guns not working with laser? No matter which attachment I set on it, it gives me the lamp in game
why is the game crashing
when i load in the game there's a crash report, I tried to unistall and install and it's the same
i did a clean reinstall & it still crashes
am I able to DM one of the developers?
HE- HELL NAAHH
whenever i play on dx12 my game crashes but on dx11 it doesn't. if i play game on dx11 frames are so unstable
what dx are you running
directx 11 to stop crashes but frame rates are not stable
if youre on directx 11 then dont try to boot the game in dx12, its probably something else thats screwing your framerate
i have rtx 4060 gpu games runs smooth on dx12 but it crashes after sometime
go into your searchbar and run "dxdiag"
oh
and itll tell you what directx version youre on
and then boot the game on the directx version your machine is on
If you are not actively using DLSS, try to run with "-ngxdisable" claunch option switch to disable NGX plugin.
it seems that on some hardware the plugin causes the game to crash even though people are not using DLSS.
Note that this is a workaround till either devs or Nvidia or whoever effed this up fixes the underlying issue.
The save files for the game are in C:\Users......\AppData\Local\ReadyOrNot\Saved\SaveGames
Getting this on the windows and doors on the Forrest house map. Anyone know how to get rid of the fuzzy bar on the right?
Sounds like screen space effect.
I dunno how i get rid of it
i had bodycam reshade and deleted it
I'll uninstall the game if i have to and reinstall haha
Is anyone else experiencing an issue on carriers of the vine? Neither Raskin or Nadar will spawn and most of the enemies are headless
I found the issue. Dlss balanced
when i check game files i have to download the game all over again any fix?
Something is corrupting your game files or is blocking steam from correctly accessing them.
Antivirus scans, cleaning apps and so on are most common cause.
You can also clear download cache in Steam.
Whenever I run the game on DX12 it just immediatly crashes, could anyone help me out?
yes his machine is on dx12
I cant launch ron, it says corrupt data
I took a screen shot but instead it gave me this
LowLevelFatalError [File:Unknown] [Line: 3227]
SCS_Node /Game/Blueprints/Items/ArmorRevised/Helmet_BallisticMask.Helmet_BallisticMask_C:SimpleConstructionScript_0.SCS_Node_0: Serial size mismatch: Got 38681, Expected 168
0x00007fffbdbf5b0c KERNELBASE.dll!UnknownFunction []
0x00007ff761053b26 ReadyOrNot-Win64-Shipping.exe!UnknownFunction []
0x00007ff76101492d ReadyOrNot-Win64-Shipping.exe!UnknownFunction []
0x00007ff7610b75a7 ReadyOrNot-Win64-Shipping.exe!UnknownFunction []
0x00007ff7610c6596 ReadyOrNot-Win64-Shipping.exe!UnknownFunction []
0x00007ff7610ad253 ReadyOrNot-Win64-Shipping.exe!UnknownFunction []
0x00007ff7610c5125 ReadyOrNot-Win64-Shipping.exe!UnknownFunction []
0x00007ff7610cf3e9 ReadyOrNot-Win64-Shipping.exe!UnknownFunction []
0x00007ff7610ce635 ReadyOrNot-Win64-Shipping.exe!UnknownFunction []
0x00007ff7610bd907 ReadyOrNot-Win64-Shipping.exe!UnknownFunction []
0x00007ff76123e217 ReadyOrNot-Win64-Shipping.exe!UnknownFunction []
0x00007ff76123de6a ReadyOrNot-Win64-Shipping.exe!UnknownFunction []
0x00007ff761245ee9 ReadyOrNot-Win64-Shipping.exe!UnknownFunction []
0x00007ff76124a8cb ReadyOrNot-Win64-Shipping.exe!UnknownFunction []
0x00007ff761249f36 ReadyOrNot-Win64-Shipping.exe!UnknownFunction []
0x00007ff76124b2bf ReadyOrNot-Win64-Shipping.exe!UnknownFunction []
0x00007ff762d7856e ReadyOrNot-Win64-Shipping.exe!UnknownFunction []
There was more but had to delete it so it fits
I have lots of mods, do I have to delete all of em?
Start by trying in safe mode. If it does the same thing verify your files. If it doesn't then one of your mods needs to be deleted
Alr.
Thank you, a mod is corrupt.
Likely a cosmetic mod for clothing/equipment, namely face wear.
I only got all cosmetic unlocker from mod.io.
THats for costumization, unless retextures count.
Guys i do have a pc but not with me rn and just wondering ready or not is not working on steam deck
Reinstalled and deleted multiple times
Shouldn't be the unlocker, but if it's outdated it might be
I got mods from the 1.0 update.
DO I have to update them every time there is a new update? The nexus mods?
Steam deck is not an officially supported platform by the devs at this time. I know others have gotten singleplayer to work so you will have to do you own research but results may vary
Ig not cuz those mods work.
You should be since the devs break mods accidentaly when they update the game. But for now go down the list and remove them from the paks folder one by one to see which one is the problem
Yeah, I removed all of them put them in a different file, and im testing them each by each.
ALl mods worked, this is the last one, so im guessing this is the problem.
Thank you for your help by the way, I appriciate it a lot.
I can't choose my weapon, I select it and it doesn't go, can anyone help me?
You have an outdated weapon/item modifying/replacing mod. Update it or delete it, or run on safe mode to be able to swap
oh thankss
Hey guys I haven't even played anything else besides some of the tutorial but I can already tell its a great game. Though I keep running into issues regarding my game crashing: This is the error message I receive when the game unexpectedly crashes (I have already tried reinstalling/validating game files, i also have the latest graphics driver)
also my PC specs are as follows: - NVIDIA GeForce RTX 4050 Laptop GPU 6 GB GDDR6
-Intel Core i5 12th Gen 12500H (2.50GHz)
-16GB Memory - 512 GB PCIe SSD
WHOA I think i finally found my stuttering problem. Turned out Window Full Screen mode was the issue. Switching it to Full Screen got rid of the random stutters that would happen frequently. Might not be everyones solution but i wonder if this works on others having stuttering issues?
Potential culprit to the problem:
Nvidia with GSYNC enabled
Changed native resolution from 4k to 2k (1440p) -- I noticed now that i dont think the game was properly running in 2k even though i set it to such.
@quiet trench ahh ok. is there anything I can do right now to solve this issue or should i just wait for a fix later on?
try going into nvidia control panel and in 3d settings enable caching, do not go under the recommended
is this normal? rtx 3060 ti, intel core i7 11700f, 16gb ram. Its ALWAYS less than 40fps while playing never higher. Should it be this bad?
What dx you playing on? You can disable per-object shadows for slight boost
dx12
its the same on dx11 aswell
figured it out, turns out its one of my mods, ran the game in safe mode and im getting a steady 100 fps lmao
now i just gotta figure out which one
huh, when i used 11 someone told me to use 12, when i use 12 someone tells me to use 11
aaand now the game loaded into thank you come again and as soon as i walked forward it exploded
Hey, i have 1060 6gb, ryzen 5 2600 and 32gb ram and with all settings (low to ultra) i have lags. Can someone help?
verify game files
hello all can some one please tell me how i can set up my xbox controller since the last few updates my controller will no longer work with the game what do i need to do to get it workign please help aqim confused
so i updated my game but it's in a perpetual state of "installing" and despite doing the common things to prevent that in steam, it's not working
The game just takes ungodly amount of time to update
hello, please be aware there is a player who is hosting a lobby called 'WatchmenYT' that is broadcasting a youtube video constantly, never starts the game. You must ban his account, I keep matching with it. Its preaching the Joahovas Witness code.
Its an annoyance and is on repeat, its been active for days. I must have matched it like 5 times
This is a first timer tbh
It installed the 6GB update just fine, but god damn it’s taking ages to actually get it done
What I don’t understand is that it’s not even bothering installing it, no disk or network activity
me and my friends have a problem, everytime we get in a game together, the server host doesn't lag but at least one friend has high ping and is teleporting and lagging??? I don't get it because we have very good internet and in discord our ping is completely fine?? PLS I NEED HELP!!!
hello, I have a problem with a black screen when you log into the game
Try enabling caching in nvidia settings, don’t go below recommended, disable afterburner, and disable overlays like GeForce or discord
Which part
Go into Nvidias control panel > 3d settings > caching > turn on and set to at least recommended
Hello i have problems since new update
My game just 'semi-crashed' where the window is up and the game is taking memory data but the crash screen popped up, could this be a ram error?
can you check logs? What does error said?
Unreal Engine is exiting due to D3D device being lost.
<ErrorMessage>LowLevelFatalError [File:Unknown] [Line: 198]
Unreal Engine is exiting due to D3D device being lost. (Error: 0x887A0006 - 'HUNG')
Verify files didnt find anything last time i checked.
Reverifying
is you gpu overclocked?
nope. nothing in my system is overclocked
im running on epic but i do have a 3060 so it should handle it, i am using reshade.
You have msi afterburner installed?
yes.
try close this
should i close any of these (im using an MSI GPU so im worried one of these may disable/crash my gpu)
is reshade latest version?
yes. downloaded it literally yesterday
idk what those do, try without msi afterburner for now
You may need to reinstall drivers for gpu
clean install, with reset all settings
woooah
i just uninstalled msi center sdk and now.. my monitor tinted green a bit? huh?
downloading newest nvidia driver
are you serious all nvidia drivers do is upgrade compatability in new games?
is not MSI Center for msi monitors? Like for calibrations and etc?
im using samsung monitor, yeah my pc is a mishmash of manufacturers and drivers
Updated windows and graphics drivers, i'll get back to you in 5 minutes
hello my game crash since new update, my pc restart when game freeze
It worked for around 10 minutes before crashing when i exited the ipad thingy
same error?
now the crash error is of different structure.. weird
EXCEPTION_ACCESS_VIOLATION
So it.. tried to access memory it wasn't meant to access? huh
do you have HAGS enabled in windows? Hardware accelerated GPU scheduling
hmm, where can i find that?
oh, yes, yes it's on
try disable it and restart pc
a have same error when i enable it, might help
if it's still crash send me crash file, will check it, mb will find something else
<?xml version="1.0" encoding="UTF-8"?>
<FGenericCrashContext>
<RuntimeProperties>
<CrashVersion>3</CrashVersion>
<ExecutionGuid>7043B9B445A4F443F734A28BDFB9AC54</ExecutionGuid>
<CrashGUID>UE4CC-Windows-025687A34238ADB86FA0BCAD52C39783_0000</CrashGUID>
<IsEnsure>false</IsEnsure>
<IsAssert>true</IsAssert>
<CrashType>Assert</CrashType>
<ErrorMessage>LowLevelFatalError [File:Unknown] [Line: 4078]
Retry was NOT sucessful.
crashed on startup, i will complete file validation.
not gonna help, send me full file in dm
will look in fully
The game does not have controller support, so you would have to use steam or some other 3rd party controller software to emulate keyboard inputs.
Why did they stop it as it was working before when first came.out
Follow instructions in the pinned messages, if that does not help add -ngxdisable to the launch options
Because this game has too many keybinds for a controller. I doubt they will change it
I see
This is a peer to peer game, you just have to deal with it
I got Out of video memory crash, I got 12gb 
pagefile size?
pagefile: maximum size 16384mb (I have 16gb RAM)
but it complains about VRAM, not RAM
both, must be same
2918mb/16384mb
make it 16384/16384
ok restarting PC
and try again, also you can check crash logs and send here
okay it worked, thanks 🙂
I play American Truck Sim on DualSense just fine, RON does not have that many keybinds that you need.
It's more about the UI and analogue sticks as it was designed around mouse cursor.
If you add hold one button then press another sure, but one to one binding isn't enough
tried launching in Safe Mode and DX11?
whats your CPU, GPU and how much RAM?
tried reinstalling?
maybe try clearing C:\Users\USERNAME\AppData\Local\ReadyOrNot\Saved\SaveGames
what Nvidia driver are you using?
If it is caused by display driver bug or by rendering pipeline in general (overlays or whatever other app or mod is messing it up) you can try as a workaround to reset GPU driver via WIN+CTRL+SHIFT+B
Like, i wouldn't recommend going even near that trash of an app that is GeForce Experience, though now that you said that.
Are any of the config files in %LOCALAPPDATA%\ReadyOrNot\Saved\Config\WindowsNoEditor (or WindowsClient, depending on the project) or any parent directories there of, set to as "Read Only" ? 🤔
Nothing should be read only and if you do not have any other INI files there then one of the parent directories has that flag.
I have an issue when using the helmet camera on your teammates, my fps will drop from 100+ down to 20-40.
tbh you can uncheck that flag from the entire ReadyOrNot in %LOCALAPPDATA% as really no files or sub-directories should be Read-Only
Verify your game files
Right click on said directory > Properties > General tab > Attributes > Read-Only (Jen pro čtení).
It needs to be unchecked otherwise the game will not be able to write files and settings to that directory.
There a lot of workaround in google, did you try all of them? Like disabling MPO in registry or MFAA in nvidia control panel? You may also disable Pipeline Cache in config or just install older driver for gpu, like 472.12
i tried installing RoN, it kept pausing when it finished and wouldn't actually install it