#tech
1 messages · Page 65 of 1
It is
Smol graphics card, gotta clean that off
I may buy some old GTX 600/700 series graphics card for one of the old machines. The GeForce 315 might be too slow for things 😂
maybe a 8800 will be good for that thing aswell.
this card remembers me my "alien looking" gt 240 with 512mb vram 
it's running ets2 in 10 fps 

I had the 320 at one point, it's sooooo slow 
i have a card that im using which has 512mb vram
XD
Cleaned those off now and applied new thermal paste
both of those old cards were dirty as hell, now I'm gonna wait for the 100 bucks worth of parts to rebuild both PCs.
Ordered two SSDs - one for each PC, Floppy cables, molex to berg adapter, a new LGA 775 CoolerMaster CPU cooler, a DIN to PS/2 adapter. So yeah, first gonna wait until that shows up.
Gonna keep the HP since it fits so nice with my old Business book, aswell as it is faster/has better specs than the Acer eMachines.
I also don't like that glossy front panel of the eMachines, it is disgusting.
putting an ssd on an old system really help decrease loading speed 
So, I need a GPU which isn't large in size above the PCI slot due to the size of my heatsink? Any recommendations?
Any GPU with water block.
Well, this is only one way to have small enough GPU.
ugh, might just get a new mobo with more room between the CPU and the PCI slot
You have micro ATX?
Yes sir
Ah
My old PC went bang so I used parts I had laying around
Maybe a PCI riser?
Do those exist? Ooo
Yes, but you need to be extremely wise in your choice.
You used to be able to get something (I forgot their names) but you could have your GPU externally
but back in like 2009 when I heard about them they had bad input lag
As you can tell I’ve been out of it for a long time
I feel like I could maybe fit a 1050ti or a 980ti in atm
Good PCI riser with stand might be exactly what you need.
Every single gpu? They take space under the slot, but not above...
Huge heatsink in microATX can easily obstruct two top PCI slots.
The PCI on the GPU is never at the top of the card though, usually just above half way
It's always at the top of the card...
Never in my life seen one at the top of the card
There’s always a food 5mm from the top of the card to the PCI
Unless your backplate takes a full slot, but that would be useless
And these 5mm aren't supposed to be a problem considering the size of the pci-e slot itself on the motherboard
I'd like to see a picture, because I don't understand the problem here...
The only way I’m fitting anything decent in is by filing down the heat sink
sad
innit man
what? you mean igpu?
what?
pretty nice too
which riser would you recommend? there's so many out there.
I don't have any experience with those.
I remember do this kinda thing back in the early 2000s ahhaha
Lol
I'll do some googling, thanks for your help man greatly appreciated 🙂
I got shock from it 1 day ago XD
The PC I had not long ago the PSU failed and so did the anti surge, blew up smoked out my office ahahah
XD
Yea
psu can blow and take the motherboard with out which will more than likely fry everything
i've got a 1000w gold in here, more expensive than the rest of it put together lol
That nice
I can't recall its hidden away at the bottom of the case
I hate these modern tempered glass cases
give me some big old slightly yellow case anyday
What your address and I send you
hahaha
I have a few of them but none of these parts will fit very well
Sad
So... the issue is the cpu cooler? Any gpu should fit under here...
Look to the left on the pcie port, there’s no room
The wi-fi card is definitely going to be a problem, though
You should have just enough space for a gpu without a backplate, maybe some will fit even with it
The I/O looks a bit bent / misaligned with the case, though...
I/O?
Input output?
Input/Output
Just making sure ahah
Yeah good shout! I never noticed that
Otherwise, any gpu should fit here... and if it doesn't, even without a backplate, then nothing will fit, and that would mean Asus can't design a motherboard for shit
I'm going to borrow a 1050ti off a friend and see if it fits
By the way, good luck finding a gpu at a decent price 😅
Not too bad here tbh, I don't play AAA games, most demanding game I play is DayZ ahah
Two LGA 775 boards out of the two machines
Left one idk the brand of with a Pentium Dual Core 3.06GHz and 1GB of RAM and the right one is an ASUS with a Pentium Dual Core 3GHz and 1GB RAM aswell.
Definetely gonna keep the left one, it has way more ports and slots for IDE devices.
Already installed the Floppy drive, it looks so nice now, so much things installed 😄
Front panel will be cleaned and maybe painted so it looks like new again.
I'll think about upgrading from 1GB to 2GB max, sadly not going any higher.
And well, if I'm to it I might wanna get my hands on a Pentium 4 D960 3.6GHz processor.
Back when HP is using universal part for their Prebuilts
and now, there are weird sized motherboard
sus looking psu
That's why I'm keeping it
it fits so nice to my Business Notebook also with a Dual Core CPU
and well, if I wanna build a new rig out of it I can just do it since the panel & the case standard is not weird
well you can do a sleeper build with powerful parts in an old case 
no one gonna steal it 
yep
I'm thinking the same for the future...
I have my prebuilt pc case laying around
but all the clips for front panel are alr broken...idk how to fix it
Yk, first of all I wanna max out the current setup in this prebuilt, maybe in the future I'll do that.
But I really like having like FireWire and such, it is way cooler
if I want to do it....I need to do some modification to the case as there are drive cage on the front section and it's limiting the gpu lenght
Oh well, same thing here
but it is a pretty cool drive cage where you can easily swap out parts
with clips
way better than reaching screws in weird angles, just loosen one clip and the whole drive comes out
for me it's riveted into place....so i can't do anything
I just need to cut it using grinder
gonna wait for the new cooler to arrive
and the other stuff, so I can build it up and maybe run it as a server/Win 7 rig again
I have my sources, don't worry xD
Well, I also have an old Win 7 SP1 stick, can use that
missed win 7
and if that doesn't work, Wayback Machine is the way to go
I want to use vmware to run win 7 but my cpu doesn't have feature needed to run vmware

Who's going to be upgrading to it? I still miss Windows 95.
As far as I'm aware, it's basically skinned 10, so you can expect similar performance 
I've seen some people on YT run it on Core 2 Duos with some slightly modified installation media 
I mean officially
Hah lol then I can let it run on my Pentium Dual Cores
oh damn it sorry for the ping
https://www.ebay.co.uk/itm/224443696846 how tf do people manage to get their hands on 100 3090s
Windows 11 to be released on October 5th.
Does anyone have a recommendation on desk speakers? Between £100-200 please
scalpers
bose or sony
both are good
3060 is qual to a 2060 super, a 3060ti is equal to 2080 or 2080ti
"Just one note you have to install it first" Ah, yes.
Me which is using windows 11 on Core 2 Quad for months
Wait that's illegal.
This should even more illegal.
Welp, I'm kinda clueless now
Well, I wanted to replace the CMOS battery of the eMachines. Did that, after that the PC won't turn on again.
Used two power supplys to check if maybe the power supply was faulty, but it wasn't since even with a working power supply the PC doesn't turn on. Now I'm kinda clueless what to do, I don't think a whole board dies because of a CMOS battery swap, well if somebody knows what I could try to do feel free to ping me
Just perfectly, the PC I wanted to sell doesn't turn on again just by changing the battery.
Doesn't work with the old one either (Replaced it even though it worked since well, I don't want to change out the battery later)
It is highly likely one of the major components have died ie. CPU, GPU etc
just by swapping out the CMOS battery? That doesn't make sense at all

should I swap my 150gb game drive to 500gb hdd?

Depends is the first hdd or ssd
it's my old laptop's hdd
The CMOS battery powers the CMOS chip, which stores the settings while also running the real time clock when the computer is turned off. If the power is cut to the CMOS chip, all of its contents will get cleared after a while. You can find tutorials on manually setting drives for such computer in case if the CMOS battery gets replaced at any point.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
but I use UUPdump 
Nope, nothing
So yeah, you are certain that that's the issue? I would buy that then
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
Or try to search a bios chip with bios already in it.... idk if it exist but you need to search on ebay or other online shops 
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
I know what it looks like but idk how they use it.... probably things for professionals....
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
my pc has a dead cmos battery when first time it arrived to me... but it still boot.... idk what happened to yours 
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
it show a warning that the cmos battery is no longer work when POST
One message removed from a suspended account.

One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
Idk how old system works, so I can't say anything 
One message removed from a suspended account.
One message removed from a suspended account.
Is it the bottom one?
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
it has 2 socket 
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
but hey at least it uses AMI 
One message removed from a suspended account.
Uff, gonna look on amazon then
One message removed from a suspended account.
One message removed from a suspended account.
what motherboard it uses tho
One message removed from a suspended account.
I just resetting my old hdd and it taking 1 hour to finish 
One message removed from a suspended account.
One message removed from a suspended account.
unlucky 
One message removed from a suspended account.
Hmmm I think the BIOS chip itself could have died though
My 486 has no cmos battery on it and I can still start that thing up
Even though it is far older it doesn't have that issue
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
yea 
or probably a service centre that fixing this pc playing with the sticker and put it somewhere
idk if it has been fixed before but I saw different psu from OEM spec, and the warranty void sticker is broke 
Well, I'm going on a small trip soon anyways, so I'm gonna store it away for the time being,
One message removed from a suspended account.
atleast the HP I'm going to reassemble, without changing the battery, then I atleast have one fully functioning system to play with. 2 DVD/CD Roms, 1 Floppy Drive and so much more.
finally my hdd reset has done
One message removed from a suspended account.
One message removed from a suspended account.
I don't remember anymore lol
One message removed from a suspended account.
One message removed from a suspended account.
Just for the case if it had, it probably is a corrupted bios Imma guess?
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
I'm way to inexperienced with that, especially with those early 2000s computers
One message removed from a suspended account.
So yeah, I can atleast give it a try. If it won't work, hey, atleast I have a BIOS Programmer that I can use for other things in the future
One message removed from a suspended account.
One message removed from a suspended account.
Just a thought, what would happen if I connect the original hard drive to that system? Might it have that data stored onto there?
idk anything lol
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
I guess that's what happened with most of the eMachines PCs
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
yeah it is
One message removed from a suspended account.
the original eMachines website lol
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
can't believe that website is still exist
One message removed from a suspended account.
One message removed from a suspended account.
oof
guess I've F up
just normal playing ets2 and I go to repair station then it crashed 
One message removed from a suspended account.
annoying sometime 
Never saw that BSOD error in a field
One message removed from a suspended account.
This is the Nintendo NES Advantage!
This is a vintage Arcade style controller manufactured by Asciiware and released by Nintendo for the Nintendo Entertainment System in 1987.
I Bought this Controller from Ebay and was Yellowed dirty with a missing joystick ball.
This restoration took me one week.
If you like it please Subscribe!
Subscribe to ...
Result is awesome
One message removed from a suspended account.
I love watching those kinds of videos
best to check whats up with it
incase u get more and more which will affect the hardware
I've try running memtest and sfc/scannow and all is fine
gonna update graphic driver as the new one is the last driver for kepler gpu and the first for windows 11
sad at the same time happy

GPU prices still inflated. 
the vendors doesn't care their customer, they just want money 
I just want a 1650. Why should it be so hard to get at RRP? 
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
Okay, I'll maybe try some steps further today on that board. Also gonna write down part numbers to get myself a new bios chip & a cmos programmer.
Atleast the SSDs and the cooler are coming today, so I can mess around with the HP
Tired of sitting in front of a computer without a graphics card?
Stand up 
I luckily have 2 spare ones
what do you expect on an OEM board and DDR2 ram 
the bios doesn't even have fan setting
the bios is useless
well since I can't change the cpu fan speed, the cpu is burning when gaming with 70+c 
when on core 2 duo, the idle temperature was 40+c, when I upgrade to core 2 quad, it skyrocketing to 50+c when idle 
One message removed from a suspended account.
One message removed from a suspended account.
there are 1 bios update but I can't even update them 
when I do some research, it seems like the AFUWIN thingy will only work in 32bit system
they doesn't even provide AFUDOS 
Be quiet air cooler do be performing well 👀
well, after I reinstalled afterburner and rivatuner, it works fine in ets2
The HP works!
All 3 drives detected
Now I gotta format the SSDs I got
Heck even the 97' floppy drive works now
This PC is great for it's age
Gotta get my Windows 7 iso real quick
Does somebody apparently know a good PCI (not e) WLAN card?
you can search for unbranded one for cheap
iirc tp link made one PCI wlan card.....
idk if it's available in your country
it's malaysian site so check your country's website first 
Worth 15 bucks heck yeah
One message removed from a suspended account.
One message removed from a suspended account.
Would work aswell, just didn't want something clunky hanging in the back/front
One message removed from a suspended account.
One message removed from a suspended account.
well it has many apparently
all USB 2.0, for the age of the system that's really solid
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
Well the first thing kinda is a no go for now atleast, the second thing is that there is no such store near me sadly
they're all 30+ km away

I hate that phone companies do this! then people try make me out to be stupid when I explain it doesn't really mean anything unless you're printing big prints 😂
It won't even mean anything period
In the case of a photo sensor, more pixels doesn't necessarily means sharper picture
Why buy a new phone for a better camera? Just buy a Better Camera.
You've got a better phone coming with the better camera, though
would much rather pay 1000 euros for a DSLR or a mirrorless, than pay 1000 euros for a(ny) phone
It doesn't even help with big print because the 100MP cameras in phones are already garbage and the extra pixels are just noise without adding any quality
Mhm
🤤
who know why I can't post in instagram? the next button wouldn't work
ignore the pics
Managed to get the old hard drive to boot
Well, gonna try to duplicate the entire Installation onto a SSD
Use AOMEI Disk Cloner for that 
wait
Open Description for info and links!
I'm asked almost every day to make a video about cloning Windows 10... after several YEARS I finally kept my promise...
AOMEI Personal Download - https://www.ubackup.com/personal.html
AOMEI Partition Assistant - https://www.diskpart.com/free-partition-manager.html
Get your JayzTwoCents Merch Here! - http...
you can watch this
link in description
thx
well, maybe I'm just going to use these old hard drives for simple data storage after that.
Even though they're old, it seems that they are functioning not that bad. With the data I think to store on them I'm not bothered to lose in case of hard drive failure.
Swipe to see all the other pictures and then try
like go through all the pictures
and choose normal filter or something
I apply a filter to one of the pic and it's working
thanks!
@mighty idol thank you aswell! Managed to get it off the faulty hard drive, successfully recovered the Recovery partition and made a fully clean install again 😄
Look at that beauty, this old NVIDIA panel.
np, I also using AOMEI Partition Assistant instead of Disk Management, it has many tools and better UI too
This board does also have onboard ATI graphics, still gonna find a way to get the control panel for that
Anyone help me with this? Every time I turn my TV off before my PC it breaks the resolution so the next time I turn on my PC I just get the BIOS screen then no signal, does anyone know how to force it back into the correct screen resolution so I don’t have to keep restoring it? Pls pls pls ping in response
completely black icons
is that an option in the „accent“ settings or some external plug-in?
^^^
then turn the pc off first then turn off your pc....
try change cables
who knows how to fix a broken clips? Currently my old OEM pc case has it's front panel's clips all break and sometimes the front panel will drop off the case
That's what I do but lastnight the missus turned it off incorrectly took hours this morning ahaha
desktop to match aswell
One message removed from a suspended account.
One message removed from a suspended account.
but I alr throw the clip 
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
Craft yourself some
probably just gonna use some screw and screw it down
Yeah that would also be possible
how many volts does pc power button uses?
thinking of buying this and customizing my power button
12v apparently
It doesn't use any volts, it is just a switch
It is normally opened
Usually, you have a separate pair for lighting
so I'll just buy 5v version
Depends on what do you want to display with that.
and probably use the PWR LED to power those lights
You have to use multimeter to have an exact value for your specific motherboard.

Typically, it is 5 or 3.3 V

Ah thanks, but does the same go for your taskbar icons? @sour phoenix 
nope
One message removed from a suspended account.
One message removed from a suspended account.



Note to self: never buy a corsair PSU. Had 2 in the past month which have both either had to be refunded or replaced. Time for EVGA..
i have a Corsair PSU that has been working just fine
i've had mine since sept 8th 2015
They seem to have a good reputation with a lot of people.. maybe I'm just cursed or something. Both times the cable just came loose after a week or so leading to random shutdowns. Used so much force trying to plug in the cord as far as it would go that I almost broke the thing even more.
i have the fully modular one
I had fully modular as well, it was the RM1000X both times
that's mine
iirc AX is a better series than RM so that may have something to do with it, idk. Either way I won't be going back to them in a hurry
I found a few others having the same issue albeit with the lower powered variants
maybe i got lucky who knows
It seems the general consensus is that corsair psus are pretty solid so I guess I just got unlucky
i've also heard that you shouldn't daisy chain the PSU cables with the 3090 series as that will cause cable damage
Yeah that's correct, you'll overheat the cables. Can't imagine it's very good for the GPU either
I have the 3090 with no daisy chaining though so I don't really think it's the issue here. It'd be a bit odd if that caused the cord to become loose
another thing is i don't have any strain on my cables
i can actually move my PSU cables around
yes it's messy and not visually pleasing but there is no cable strain
Oh wow I love that CPU cooler design
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
the cooler orientation kinda sus 
What budget GPU should i get bois?
gtx 10's
look at what game you wanna play
No such thing as budget GPU currently.
Yeah that I know
under a grand really.
I only play ETS2 and Assetto Corsa.
gtx 600 or 700 should be enough I think 
Depends on the resolution though. I'd def go 1050 Ti at least if you want decent FPS at 1080p.
You should be able to find used 1060s for not too much
Don't get an old gpu, it could die at any time
Oh full 4k
Yeah I’ll not buy a second hand card

I'm running a PC with a GeForce 7300 LE here, aswell as another one with a GeForce 315, can't say that this is true
I'd say it's true, but look at the condition also....and secondhand gpu also cheaper....that's the reason I liked to buy used item
I bought a used gt 240 in february and it still works fine....it's on my showroom now
Hello there. What cooler do you recommend for 3600x?
the most popular, hyper 212 evo 
I don't have decent pc so I don't know much
noctua also not bad
the new redux tower cooler 
Google is fren.
new lesson I learned today: Never update gpu driver from Geforce Experience....I waited for 10-20 minutes for preparing packages and I just got an error 
I think it should be fine as it's my last time to update gpu driver
as 471.96 is the last driver that will support kepler gpu
One message removed from a suspended account.

I should buy a new gpu as my old gpu only supporting dx12 feature level 
but for now....I still can't afford for 1060
my old gpu only supporting dx12 feature level
Huh?
Well, yeah. But I wanted to know which cooler others recommend to take. Thanks :)
Thanks!
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
It is 11 feature level, not 12
I always do
so my motherboard has 8 audio channel (6 on the back and 2 on the front) and my green port on the back not working sometimes.....it will detect that I'm connecting to black port or the pink port on the back
I'm currently using R2.81 deiver from realtek
I didn't use R2.82 or OEM drivers as it's not working or it will make my pc crash
Wow, what a twist! Mikrotik adds a Docker containers support in their RouterOS 
i have a ps 1 wheel and a ps 1 pedals on the pedals only the left one works and the wheel it turns only 180' and normally it has to turn 360' so when you turn the wheel even a little it turns the double in game so should i use keyboard or wheel and pedals
can i make the in game wheel turn 180' like my wheel
like half a circle
AOC G3 3440X1440 165 HZ
At first I wanted to buy a Samsung monitor, but it was too expensive.
But Samsung’s display is really good

all i see is a of symbols
Damn that desk is pretty small.
Well, I fixed up the eMachines.
Cable fault, now it does power up again
So yeah, gonna get the exact same RAM as 4GB kit and use that in the HP, since the 3GB kit from the eMachines worked in the HP. Apparently though the 1GB kit from the HP didn't work in the eMachines, but as far as that I'm pretty happy now.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
what is the black port?
ignore the pci port, I don't have many pcie port so I need to use pci port as my back audio jack has broke
Joystick / MIDI

Morning/Afternoon/Evening all.
I have a weird issue I hope someone here can help me fix.
My PC (inbox for specs) has been randomly losing display, at any random time I could be sat watching something then it'll go black and say "no display" on my TV. The PC will not fire back up after BIOS screen until I have restored it to a restore point. There is nothing that I can find anywhere with anyone else who's had this issue. It's really starting to get irritating so any help would be smashing.
Thank you Tech people -- ping in response(s)
Grab a flash drive, burn something like Ubuntu LiveUSB on it, boot from it and try to use it for couple of hours. Then we will know if it is a hardware or software failure.
I feel if it was a hardware issue it would happen at some sort of interval or when similar things are happening but it just so randomised. All voltages seem to be fine from what I can see.
If you have to use a restore point, I'd say you should start by doing a clean install
I'll get onto that then, was holding off on doing that for as long as possible but might be the only solution.
plinky - my pc is running really smooth rn, really happy with what its running like
the ram is completely fine too
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
🙅
One message removed from a suspended account.
One message removed from a suspended account.

One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
😱 😱 free fortnite 🤣
my intergrated graphics are 100x better 😂 😂
how it possible to test the shroud 
ayo my gt630 was bettter than that 
lmao
The amazing fortnite pc
the pc, monitor, and keyboard and mice are apparently free but it's £330
Lmfao
and can't even play fortnite
my gpu almost reaches 1ghz but it crash at 1006 mhz 
reached 997mhz on the core 
lmao

do you know what's wrong with it 😫
okay now I got it 
this hurts to watch
Not even a raspi 
is that an old AMD CPU? Looks like it.
me as a guy that can't afford a powerful pc be like that kid must go to hell 
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
I know this sounds stupid but can’t you just flip it?
Of course not
I need a base card as running one without is killing my pc
Palit GeForce GTX 1050 Ti StormX 4 GB GDDR5 Graphics Card, DiplayPort, HDMI, Dual-Link DVI-D, Grey https://www.amazon.co.uk/dp/B01M2ZC61B/ref=cm_sw_r_cp_api_glt_fabc_S2M5R00AFRW0JYB6ME0S
Would this be good?
Not at that price it isn't 
I just found a better one for £160
GPU prices are insane here rn
ye almost the same as your country but here it's RM 1000 to 2000

it's probably around 400-500 bucks
RSA is anywhere from 500 to 700 USD.
Can anyone help pls, got the 1050ti put it and it all fires up but I get no display
try use other ports if it's possible
sometimes, some ports needs a driver to operate
And you actually moved your video cable from the built in port to the port on the 1050ti?
Faulty card, took it back
faulty card 
PC shutdown randomly overnight and now won't boot. Motherboard RGB light doesn't illuminate as it should when receiving power, although I did notice the ethernet port lights up when connected. Also tried a different PSU with same result. Dead mobo?
Plug out any unnecessary stuff that you don't need to boot and test with that
was it new or used?
What was the issue?
something stupid 
i'm gonna guess it was a cable or a setting
Turns out the mobo is dead, RMAing it
it's good if it's still under warranty 
Silly mistake ima keep it to myself 
Damn it, that's bad.
https://videocardz.com/newz/nvidia-rumored-to-launch-geforce-rtx-2060-with-12gb-memory-by-january-2022 is Nvidia ok 
NVIDIA to reintroduce GeForce RTX 2060 with 12GB memory? We have new information on planned update to GeForce RTX 20 series. Back in January, it was reported that NVIDIA is bringing back a large stock of RTX 2060 graphics cards. This would be a direct response to the market situation at the time which was […]
I'm guessing you mean a 2070S? Don't think Nvidia ever made a 2070ti
So the 3060 with 12GB memory wasn't stupid enough, apparently
Well, the eMachines Windows 7 Home Premium OS is actually sick
it changes boot screen of Windows, shutdown screen and even the general theme to be more black
I like it
TWENTY (20) YEARS. https://youtu.be/WNnZS8DRRbU
#windowsxp
another update video: https://youtu.be/gv7ZUFGWKEE?t=554
Yeah, it's #quick af, also the #Windows 11 #startup sound is #nice
oh and imagine this being in people's #recommended heh...
(this is a pre-beta/leaked build of Windows 11, at the time of recording. Thanks so much for...
That looks cool for a crappy emachines pc.
Did that already two hours ago, tried to get the recovery discs set up in order to install everything on a SSD but it failed with the 2nd out of 3 DVDs, gonna mess with that tomorrow.
So for the time being it'll run from the original HDD, I'm afraid it will die if I'm gonna use it more
Oof.
well, gonna figure out how to clone the disc
it has bad sectors, can't use normal programs for that unfortunately
4 damaged sectors so far, recognized with AOMEI.
Gonna need to figure out a way to do things from here.
Thank you so much!!!! I'm gonna try that asap
:thonk:
Well, no permission to refresh the bad sectors apparently, permission denied it says
🤔
my pc started to can't catch up with newer games 
does Intel Core I5 3470 is good?
it's impossible for now.......as that's quite expensive and money is important rn
probably gonna pair that with msi h61 motherboard
What are you using it for?
schools and ets2
as I notice q6600 quite hard to catch up with ets2 niw
that's people gived system so I appericiate it
GG. That's what my dad had previously actually. So yeah, 3470 is enough of an upgrade.
I love it when I see 2nd gen i3 processors at school 
but atleast they have DDR3 RAM lol
well, I'm mostly stuck with DDR2 RAM on my old systems
and LGA 775
unfortunately, my school pc still using intel pentium/celeron 
my school is still using the old full ATX acer Veriton.....wondering what's the manufacturing year 
Well, we have the money
but they don't do anything
we've been stuck to get WLAN for more than 3 years
pretty funny for a high school
but after last year, the "computer" subject has been removed from all government managed schools
probably goverment dont want spend money to buy computers 
oh well that really sucks
well, gonna wait, maybe I'm lucky and I get two machines for free with dvd rw drives.
when In The computer class, I'm the one that will get full marks all the time 
computer teacher loved me 
Well, the bad sectors turned good again
Although they're with high latency like 1s and 250ms, better than being unavailable.
Finally I could copy the recovery partition
eMachines after many problems restored into original shape, with a SSD!
still watching apple making new iphone and I can't even afford them 
me thinking that none of them are good, only the old ones
I like the iPhone 7 and 6 they're the last good iPhones of the last decade.
I love the pink colour, furthest to the right, but if I can I’ll preorder the pro just because of the camera 
The phone looks the same as the others just moved the camera a bit
The phone is better tho, especially on the camera sides of things, let alone performance. The notch being 20% smaller too is sorta appealing to me, the thing being can I justify the money for an upgrade from the 11, I don’t know
£519 after my trade in of £260..
Whole world: Fingerprint scanners
Iphones: FaceID 
Surface devices also have something like that for Windows Hello, and Samsung has (had?) iris scanners/face recognition. Also tbh the amount of times I had to clean the TouchID sensor per day was just 
Windows Hello combines multiple identifications mechanics.
Samsung doesn't have iris scanners anymore. They have fingerprint scanners.
If you had to clean your sensor, then there is something wrong with your pockets 
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
Yes, I use their (Samsung's) fingerprint scanner. I've found it works very fast and is super reliable and convenient.
I have the iris scanner on my tab s4, but on that its not as fast.
One message removed from a suspended account.
One message removed from a suspended account.
using a samsung a20 fingerprint scanner, no consistent at all 
you need to have REALLY clean hands for it to work everytime
and cant be wet at all
well it was only like 200 pounds so dont care lol
tbf a20 is the cheaper model, I got the S20 Ultra and it works flawlessly
good enough phone for discord and instagram xD
Sometimes it even scans my face before I do the fingerprint
also the new a series phones are even better
Yeah
Not battrey life, I still have my phone from 2013, and It hasn't pooped it self yet
@sour phoenix
nice
One message removed from a suspended account.
Only time it doesn't work is when I am in the pool, but FaceID works perfect then
Whenever I get my figers even remotley wet on my new phone, figerprints don't work
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
Yeah, the phones are awesome
Smart Lock is nice too, keep it from locking when on me, or whenever I'm at home
my favorite is the 8
I think I need to reroll my fingerprint as my fingerprint sensor getting hard to detect my fingerprint 
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
I'm more into original iPhone, 6 and SE.
Yeah, those really would have been my only choice where I would have bought Apple.
I loved the 4s design at the time, little brick 
When the 12 came out, it really caught me off guard and I liked it. I don't think I'll go back to iOS again, but I like the 13 Pro
One message removed from a suspended account.
One message removed from a suspended account.
Maybe but yea Android has more modding potential overall. You don't like what the manufacturer's UI? Custom rom is the way to go. On iOS well, you're stuck
At least iOS made its UI more customisable recently, I was stuck with the original UI for the longest time 
I still can't understand why you can't move icons freely, on the home screens. You can do that on MacOS so 
Ye it’s strange
If you want to install custom rom, it makes your system more unsecure due to unlocking bootloader thing. So I suggest doing this only if you really know what youre doing and you know what risks there are.
As of now, OEMs are discouraging or even outright blocking some features for unlocked bootloader, so it is even worse.
Yes and no, because with some roms you can relock the bootloader and keep using them
But if you don't want to do this, you can always install different launchers, which is still 1 step ahead of what Apple offers
And that's not right. You, as a consumer, should be able to do whatever you want with the phone you bought imo
Just spitting facts #RightToRepair
I just heard that if you unlock bootloader on samsung galaxy fold 3, some feature will be unuseable
camera, google pay and several function can't be use if the phone has an unlocked bootloader
Well, sad but true, that's just the reason I work with older hardware.
It's just more worth to keep alive tbh
I mean, we only have like old Windows 7 laptops with socketed CPUs, nothing else. None of that soldered on bs
I'm really happy, i fixed my old trs-80 pc1 calculator :)
It came out in 1980, 41 years!!
58008 
damn, calculator back then was so big......even my casio fx-570 just as big as my phone
and it also has full qwerty keyboard.....kinda weird but who knows? 
The small printer works but it's out of ink, the printer is optional, i can remove or unplug it
damn I hope I can get a hand of a 90s Compaq
Name one please.
when you pay for 100Mb net
Well, not for all.
GPay can be easily "enabled" via Magisk, but its rly annoying to do a lot of actions to make gpay work, so ye.
Pixel Experience
You CAN NOT relock your bootloader due to g.co/ABH
Well, it is possible
What rom can bypass hardware check?? Name one please
It depends from device to device, but as I said, it's possible with PE
It is not possible to bypass hardware checking
Do you mean SafetyNet?
If by SafetyNet you mean hardware checking - no
Dm verify, unbypassable thing.
(Not that discord dm's)
"dm-verity" if you have heard
/posted that on LTT discord aswell, kinda hung up onto that
Well, I somehow have a big problem with my eRecovery discs of the eMachines. Beforehand the recovery partition had bad sectors in it, I managed to fix that damage and restored the data of the original HDD. Then it successfully burned 3 eMachines recovery discs, so I thought I can use those to make an entirely new installation on my SSD. Problem is now, as I wanna install it in the setup, it won't boot afterwards.
It just says "autochk program not found, skipping autocheck". After that I get a bluescreen and the system restarts. Upon further inspection I saw that the recovery setup didn't create the right partitions, it only created one big one marked as "recovery partition" instead of "PQService", "eMachines" and "System Reserved"
I don't know if it might be the problem that the SSD has a smaller capacity than the original hard drive, I upgraded from the OEM WD 450GB HDD to a Kingston 240GB SSD.
Yea I know what that is
Bone stock roms (like LineageOS) shouldn't trigger it
Unlocking bootloader triggers.
Well you need to flash TWRP to install that, that requires to unlock the boot loader.
so yeah, it kinda does.
Atleast it did on my old Tablet when I installed LineageOS on there
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
can't see that, goes way to fast
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
Well, time to get DVD RW discs anyway. Wasted many DVD R on that.
I got myself an SSD, deleted all the partitions and booted from the Recovery disc.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
what u mean?
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
then the recovery partition doesn't work
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
Yk I already did that, copied the whole files/partitions from the HDD.
When I try to open up the tool for recovery then, it says that the system configuration doesn't match and the program closes.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
Well, it does boot from the SSD when I copied everything from the HDD
One message removed from a suspended account.
but the recovery partition just doesn't work like I said.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
Well, the hard drive is not that good anymore, I'm afraid it could die. I'm gonna try to copy the partitions one by one, so the recovery partition stays on size like on the HDD
One message removed from a suspended account.
One message removed from a suspended account.
hmm, might be worth the shot
One message removed from a suspended account.
but I have to say, I know now why eMachines is generally hated by most tech ppl
One message removed from a suspended account.
lol
One message removed from a suspended account.
the HP is way better, even if it is older.
Gonna get some RAM for that now that I think about that. 1GB seems not that much imo
One message removed from a suspended account.
One message removed from a suspended account.
I mean, I could get it up to 4GB, but Windows XP 32-bit on there only supports 3GB
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
I mean
the curved monitor in 2008
who would have thought like 10 years later curved displays would be something almost everybody uses
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
I always see ppl using like those 27 inch curved monitors
One message removed from a suspended account.
One message removed from a suspended account.
i have a 27 inch curved monitor
One message removed from a suspended account.
One message removed from a suspended account.
Well, I have a 24 inch curved monitor xD
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
I have 4* FHD Monitors with about 27 inch
don't need curved or 4k or > 60Hz 
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
Heh, well I have 3 monitors, one flat 24 inch, one curved 24 inch and a 4:3 VGA monitor
it's not like
. x
.xxx
it's
xxxx
cuz why not
but the 4 th is currently not in use, cuz my desk is dirty and no space xD
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
xD
I wanna get a wall arm to install an old TV behind me for my consoles
One message removed from a suspended account.
Well, I figured out working with three monitors - however, the 4th is currently my backup, IF something happens 
And in the worst case scenario, I still would've my Laptop
(which can't even handle Minecraft xD)
One message removed from a suspended account.
here is me having three Dual Core Laptops
One message removed from a suspended account.
One message removed from a suspended account.
plinky i would have to enable surround view for that to work
mine stands around in the kitchen and I always fly over it
but never put it away so I don't fly over it xD
One message removed from a suspended account.
Gotta find a use for that monitor there
One message removed from a suspended account.
One message removed from a suspended account.
plinky i have 4 separate monitors



