#is-my-sprite-ready
1 messages · Page 69 of 1
alrighty I'll fix it
You have to do the message properly so the bot can compare your file name to the numbers in your message
kay, I just had all the kanto ones and get a little anxious when they're not all presented together. No biggie, I know now
#1107028333528629361 Any feedback?
https://discord.com/channels/302153478556352513/1106297380606845029 Here's Ariados/Gengar, does it look ready?
#1106804807165038662 any feedback before posting?
I feel I'm close to submitting this guy.
So now: No tail, tail 1, or tail 2? Also of course feedback is more than welcomed https://discord.com/channels/302153478556352513/1106807202997600337
Also another project of mine, do you think my dessert boy is ready to post? https://discord.com/channels/302153478556352513/1107078612026404934
Thank you for your input, I'm considering him finished 🙂 Just going to finish the other two in the evolutionary line and I'll post them all together ❤️
Looking for more feedback on my pinsir/cradily sprite #1106424353966526524
Ready to rock? #1107417138257465344
Any final thoughts? https://discord.com/channels/302153478556352513/1107513724656435241
#1107435373287723049 anything missing?
I remade the sprite
Which looks better? Did I waste my time?
#1106968833534722129
Ready to post? #1107415789612568687
would like some feedback :) https://discord.com/channels/302153478556352513/1107551456216752192
#1106957599661895691 ready to post?
https://discord.com/channels/302153478556352513/1107545265973514283 is the puff done?
Any feedback? #1107420689377529896
Ready to post? #1107435373287723049
second pass trying to make it more readable as a mismagius fusion #1105078899303522305 message
#1107564274332749884
Any feedback?
#1106487635549093988 Well, any last opinions before i send this guy to the gallery?
#1107572301299462217 angy
https://discord.com/channels/302153478556352513/1107556065593266307 feeback appriciated.
Just wondering, if I've posted a sprite and gotten
's on it but no-one's actually spoken in the thread is it fine to post? Or should I post it in here again/ do the feedback command
I thinkyou can post if you feel like there is nothing you could improve maybe try /feedbackpls command once if nobody said anything
What is transparency?
See through pixels = bad.
If it's what you're asking
#1105266031032795146 any feedback?
is it allowed to trace from other games for sprites?
been thinking of making a rhythm heaven sprite for a bit
@velvet bronze You shouldn't tell people to not credit, just because then they might not credit other people. Plus, you worked hard, you deserve it. 😄
so random quesion, do we have a limit on pixel colours?
i mean the less types the better, but if you have like 17 instead if 16 its still good enough?
Deoxys/Jigglypuff (380.39) #1106205479706832946
is it good to go?
The upper limit is 64 but staying under 20 or so helps fit with the Pokemon aesthetic
Please link your thread so we can give feedback
thank you xP
#1106212552322584596 Ready?
Yeah, that's still fine. 30 is when you start pushing it, though even that's fine if there's a reasonable explanation (like a Smeargle fusion using a bunch of paint colours). 🙂
make sense have a beutiful day 👌
I just finished these guys, are they ready to post?
https://discord.com/channels/302153478556352513/1107308500712951888 Anything to say about this one before I send it?
Should I post my alt color sprite along with my sprite in the gallery or not
if you want to
#1107636097258885140 ribbons look good or no?
#1107643005420187648 any feedback?
@hidden laurel your Sprite Wobbuffet)pidgeot has an error
You shouldnname It 202.18.png
#1107456795556978728 which one looks better and should be main?
Oops! Thanks. I'll fix it.
@unique escarp Hi, I can't find your butterfree/weedle in #1050404143807873157 - please make sure you make a thread for every fusion before posting it to the gallery!
#1107456795556978728 ready to be posted?
#1107629948568612865 these guys ready?
@sudden wadi transparency on the torterra
yes solve the probleme
#1106185453998178404
Ready for gallery?
@velvet bronze please put magmortar's number in your asset gallery post 
these guys ready? #1107651024761651371
#1107154712475734116 is this fella done?
#1093621425484611724 and #1104391511388471407 respectively, anything that needs to be changed before addition to the gallery?
the same goes for these 3, #1103313043171057665
So gonna try here again: Hi ya all, got a bit of a technical question:
I’m using csp and apparently there is a problem that on discord it adds a weird halo around the image. Tried to fix it by saving in a different program. Just have no clue if it worked.
So anybody got experience with this or use csp to make sprits?
@hidden laurel you can delete the first, incorrect, wynaut pidgeot from the gallery
Oops sorry I forgot to check that, I'm rectifying this right now and I'll repost it here
#1107648264989319268
The spikes are good?
If it's the white outline that doesn't really matter, it's entirely a discord issue, it doesn't affect the image
Just a weird resizing artifact from discord making the image smaller
Should I continue in this direction? lmaoooo
#1107667272966873269
This would be an main? I already did one like this some time ago and it became an alt, now I’m trying do make it a main
Looking for feedback
#1107651265225302127
Would transforming Magnezone (a UFO) into a shuttle for a fusion be considered a joke alt?
@smoky solar one of your sprites in Gallery has the wrong size
is #1107384793605361755 ready to post?
should i post this now? #1107642448706031686
I think i got the ribbons looking good, so now I'm wondering about the face #1107636097258885140
#1106051088689418330 ok finally got the colours sorted any advice?
Burnnnn #1107678621226762290
Stripsss #1107678621226762290
Huh, I thought it was and now im struggeling to see the difference 🗿
Imma delete it from the gallery and look it over
#1106681107174404106 update! could use some more advice
https://discord.com/channels/302153478556352513/1107686968139186307 Need feedback, as well as whether the current colors works, and/or can be better.
Also, guess the reference.
where can i download the sprites from ?
Gee I wonder where the #downloads are
dont be so rude man!!
Hello! I had a half-pixel problem on my sprite, so I did it again pixel by pixel, do you think I can post it on the sprite gallery now or should I change something? (@abstract briar) solved
Give me a link to the thread with this sprite, please.
If we get at least one person's feedback in our spritework thread, should we still post in here before posting to the gallery? I posted my first few sprites to the gallery after getting the spriter role approved, but now I'm wondering if I missed a step back then.
Aight, get ready for something cursed
https://discord.com/channels/302153478556352513/1107692266857959434
Ready to go? #1106660283625242742
I think the amount of feedback is not too important. People should be able to give feedback, so you can decide to improve your artwork further, before posting it. If you feel like it's ready and nobody pointed out something major, go for it
https://discord.com/channels/302153478556352513/1107550026542096444 Looking for more feed back :3
Eh, that varies from person to person - not everyone is able to honestly self-identify issues with their work, and that's what /feedbackpls is for.
Yes, exactly. Maybe I just worded it weirdly ^^
@weak torrent You might need to change the file name of your Espeon/Piloswine.
Made a Fire Fairy #1107701436587970650
Which do you want as a main? Full Fire Flowers or a different color?
#1107705597178171472 What to fix?
#1107706789740421322 Any feedback?
Help? #1107706908317601792
#1105273229901320354 ready to post or is there more feedback to be given?
How do you close the spritework critique forum?
#1107064414403829820 Good to go?
#1107643005420187648 ready to go?
How is this #1107709396005441587 fusion looking?
#1107445472018321489 this friend ready to go? If not, please lemme know why in the thread!
#1107705597178171472 ready to go?
So, I got a curious question. I didn't get any feedback on my Mantine/Garchomp fusion, but I did get a decent number of Heart Mails, and on here, it even got a couple 'Post it's.
Which leads me to my question: are we even allowed to post our sprites to the gallery without getting feedback? Or do we need feedback before we can post?
#1107680959916159017 Which of these colorways looks better? Option 1 - complimentary colored flames; Option 2 - "shiny" colored flames
Which one is better for #1107706789740421322 ?
is it a bad idea to make my first sprite as 288x288
You should work at 96x96 and only upscale when you're finished working.
^
Better to avoid half-pixels.
will it half pixel if i already sized it as 288x288
Not necessarily if you were very careful to avoid them, but quite possibly.
But working at 96x96 and upscaling last is also just a lot easier than working carefully at 288x288.
how does it hlaf pixel tho i need to know how it happens
?tag halfpixels
Half-pixels are wrongly-sized pixels, usually created when working with sprites that are resized to a 3x scale.
Since all sprites used in IF are sized up from 96x96, every pixel is technically a block of 3x3 pixels. If you now work in 288x288 or any other size that isn't 96, it is possible to create pixels that are not 3x3 blocks. Having these in a sprite will make them look extremely janky and distorted. Those are half pixels. Avoid these at all costs.
If you resize the body part of a Pokémon to make it fit the base, even if working at 96x96, you will get double-sized pixels or larger. Those also count as half-pixels and should be avoided by polishing/redrawing the lines.
Resizing to a scale that isn't a multiple of the original image's size will also result in half-pixel, e.g., if you start with a 80x80 canvas and resize to 288x288. This can be avoided by making sure you're on a 96x96 canvas, or failing that, always resizing to a number that's exactly 3x your canvas size.
https://media.discordapp.net/attachments/700790080175996938/909896436202745926/half_pixels.png
Did you read #spriting-guidelines?
i did
i just need to know how it happens so i can avoid it
Read there It Is written
oh ight i get it
If you don't completely fill a 3x3 cell on the 288x288 image with the same color, that's a half-pixel.
yeah but what if i just dont use any 3x3 and just make it as the size of 288x288 like manually drawn all the way
Essentially, if you work in 288x288 you NEED to use a pencil size of 3x3 for every "pixel". Otherwise, when it is sized down for the game, there will be fractions of a pixel. It can be very easy to mess this up haha so it tends to be easier to work in 96x96
oh ight i get it now
Even then, I think it might be possible that the pixels could be misaligned, meaning the bot may consider them half-pixels even if they aren't.
Dunno if that's a case, but...
In any case, I just find it easier to just work in 96x96.
Holy Arceus, what the hey is that!?
yes getting lots of detail into a 96x96 space is definitely part of the challenge here
Octopath traveler champions of the continent final superboss
i wanna adapt it to make it the new Arceus/Shedinja
cuz i find it a bit underwhelming xd
or just for myself idk
#1106804807165038662 any thoughts, ready to post?
looks good !
#1107714477874491404 which do you prefer: more or fewer tentacles?
@pallid flare That Pawniard/Growlithe you posted honestly looks more like one of those joke alts.
@mellow thunder Your Mismagius/Electrode is being classified as a Celebi/Electrode by the bot.
just gonna say that lmao
oop
you mustve put the wrong number
I was dicking around with celebi sprites when i named it earlier oopsies
does anybody have a custom drifloon base theyd be willing to let me use?
Theres a couple over in the assets gallery, youd have to go find who the og artists are tho
epic ty
hey I have little to no experience in spriting but I just did my first ever fusion attempt, can I post it here and ask for feedback or should I wait until I have 3 sprites ready to apply for the spriter role first? :3
You can post it in #1050404143807873157.
got it thank you
then you can post it here and link the post for people to discuss there
ah I see
after posting in spritework
ill give you some advice if youd like
sorry how do i search specifically for drifloon ones?
is there a way?
go to if.daena.me and only put drifloon in head or body in the search
but for bases
I usually just go to the search bar in discord and do "custom drifloon" or "drifloon base"
ok thank you
ah thats what you mean, my b
no worries
my tangrowth/parasect, what ya think? https://discord.com/channels/302153478556352513/1107733360886960230
looks good enough to post? (Jirachi/Trapinch)
(add the thread)
changed the extra tentacles to start at the top #1107714477874491404
i asked if it looked good enough to post
well if you add the thread we can give you feedback there
i'll go ahead and post it then
I still want some clarity to my earlier question: are we allowed to post our sprites to the gallery even though they didn't get any feedback?
posting in #1050404143807873157 is not the same as posting in #sprite-gallery . when people ask here if something is ready to post, they mean to the gallery. which you need to be a spriter to do.
you can, theres no rule against it. its just better for overall quality if you try to get some beforehand
ah ok, thanks!
sorry btw
no worries. we were all newbies once
So that means I'm allowed to post #1107709396005441587 to the gallery even though it didn't get any (worthwhile) feedback?
Because I didn't get any feedback, but I did get some Heart Mail and even a couple of "Post it"s earlier.
if you are concerned, use the /feedbackpls command in your thread
I was just curious, is all. Like I said, I ended up getting a couple of "Post It"s earlier despite not getting any feedback, which is what prompted the curiosity on that matter.
For customizing the player sprites which files do I need to switch out? Because I see multiples of the same file with different names.
Ready to go? #1107706789740421322
Made some slight adjustments, so this will be my final call on #1107709396005441587 Post It, or Not Yet?
Need feedback guys! #1107747218523430932
Feedback? #1107748499078008952
#1107714477874491404 thoughts?
Feedback or ready to go? https://discord.com/channels/302153478556352513/1107369737337450496
#1107648264989319268
Which one is better?
ready to go? #1107744581971345418
I have a question, i also read the other channel but im still unsure, if i want to post in the channel a sprite that i think is finished do i also tag "added to gallery" ?
if you mean your post yes you change the tag from feedback needed to added to gallery
Cant i put both ?
you could but because you posted it to the gallery it should be completed
and then you dont need further feedback
No sorry, i cant put it in the gallery yet, just #1050404143807873157
yeah you need the spriter roll for it
So just need feedback?
If the sprite is good could it still be accepted?
Anyone know how to obtain original pokemon Sprites ???
do 2 other sprites and ask in "apply for spriter" and then you can post in gallery after being accepted
Most of the fandom Wikis have the original ones archived
Alright 👍 imma post the one i made for now then, its not great but hey, one step at a time
either in game files or in the spritework resources discussion
or assets gallery, online and stuff
I think #spriting-guidelines talks about this.
I think i saw it at the very top
Thx
#1107336644522156118 Which of these wing poses is better?
#1107750515267350619 Fakémons I made for my ROM hack. Do they need any tweaks?
ready to post? #1107703424495145060
In my thoughts about how to make #1107288622266318969 better read as bellsprout, I've come up with a weird idea.
Which one works better, base with flippers, leaves instead of flippers or bubbles shaped like leaves?
I also appreciate any feedback generally for the base design or to a specific version.
is it possible to make your character sprite look like goku?
if you replace the pc sprites with goku sprites I dont see why not
#1107052780184682526
is the weard halo fixed?
pc??
you mean the pc in the pokemon center?
player character
idk there is prolly a guide on youtube or something
#1107225894243799090 Which is better? I realised that I need some way to differentiate between the latios and latias versions. I could also do different bases for the sprites.
I think you go into the game’s files, and remove the player sprites, bring in the new ones with the correct file names and image, and restart your game. I don’t play, so I’m just using general Knowledge of games here
Should I add more suit details or not becuase it wouldn’t look good when shrunken down for lineart
can someone mak the feet not so big😅
kadabra/blazeiken
This fusion doesn't appear to have a custom sprite! You can search for it in the #sprite-gallery to make sure.
the hand and feet look a little funny
theyre blurilly resized :///
That's an autogen lol
You can make a request for it in #sprite-requests
kk
#1107759212769054872 any feedback?
reddy to post? #1104987173947707433
Which one? #1107773484664365238 mouth or no mouth
#1107735514565574707 This bug-bird needs YOUR help to become the best it can be
Good to go? #1107747218523430932
#1107336644522156118 Is it ready for the gallery, or is there still room for improvement? Feedback appreciated!
#1107788458476437554 hands 1 or no hands 2?
#1107789078646235136 Anyone got any tips on how I can improve this sprite?
https://discord.com/channels/302153478556352513/1107431837795635300 Is it good to go?
#1102715366490243112 is this okay
Feedback? #1107748499078008952
Hey, is the 288x288 dimensions a resizing upon exporting the image, or is it the dimensions used when making it?
Theres no set palatte but you should try sticking to the gen 5 colors
If theres any other questions you have #spriting-guidelines is a good start
Imo if you're new, I'd stick to the palette of the mon you're using as the head
#1107745354130128936 Post it or Not yet? Not looking for design feedback.
@jaunty quartz Bot thinks that your Vileplume/Golurk is some sort of Litwick fusion.
Let me resubmit it
Probably mistyped something somewhere
Ready to be posted? #1107788458476437554
Just as a reminder, Golurk's Dex number is 369, not 365.
Yeah I fixed it
Should I remove the outlines on the roots?
#1107651265225302127
I would show you what it looks like without them if Discord could get their shit together.
Luckily, I got an actually transparent version in the thread before the app updated.
Please help idk how to freehand but I'm trying anyway #1107446783795286016
Would any spriters be able to watch me work in voice chat #3? It's my first time working on a sprite for Pokemon and I would love tips. I have read the Spriting Guidelines several times, I feel pretty comfortable with it, I just want to do this Mon justice. Magnezone fused with Doublade c:
hey im doing pest control Ambipom (Weezing/Ambipom)
can anyone give tips on gas shading
i have but im asking for gas shading tips
I’m that case, 🧵
How can I give feedback without a thread to put the feedback in
The head and neck say giratina to me
the spikes too kinda
I'm thinking shedinja personally
Working on my first-ever sprite. Can I just get some basic feedback, it's obvi not done
is this Magnezone and Arceus ?
maybe make it so each other thing on the sida has a blade ?
you need a thread in #1050404143807873157 (even if it's a work in progress) for people to give feedback in
and unsure where to move forward with it. I'm thinking the doublades but without the eyes?
Ah yes sorry. I'll make a thread now
maybe somethig like this?
i dont know how to share the thread
nvm I don't have a role and this is my first first sprite so I can't do that
You can, actually. You just can't post sprites in the gallery.
anyone can make a thread in spritework
maybe you aren't checking the needs-feedback tag?
#name of thread, same as a channel link
ty i had no clue i got some help from someone else sorry for wasting your time
I made the thread following up on Doublade/Magnezone
https://discord.com/channels/302153478556352513/1107686968139186307 Need help deciding which version to work on. Differences are on facial elements, and 1 version has no hood
@weak torrent The bot detected some transparency on your Meowth/Gallade fusion. You might want to take care of that.
ready to post #1107636097258885140
also, it appears that it doesnt have a thread in #1050404143807873157
Wait, seriously? That's not good, then.
Welp.
https://discordapp.com/channels/302153478556352513/1107770424760221849 I fixed the eyes. Should I fix anything else?
1 left 2 right
https://discord.com/channels/302153478556352513/1107836392467349564https://discord.com/channels/302153478556352513/1107836392467349564 Hello, I am in need of critique. (do we only need a total of three sprites to apply?)
Tag the thread 😉
Is this the link to your thread?
Yes, did i do it wrong?
Because It doesn't work i think
Post the image too
#1107820307353452564 any suggestions to my smol duns?
banette my beloved
trying to figure out how to make the background transparent
Please create a thread in #1050404143807873157 then post the image of the Sprite and the link to your thread so we can give you advice there!
alr
To link the thread you Just have to write # and the name of the thread
Post the image in the message too
Dose the latest version have the latest sprites ?
#1107850608641310740 need some feedback pls
any body working on a furret lucario fusion?
#1107417138257465344 Hopefully my last time asking if this is good to post 😅
#1107854378821488640 hello, looking for feedback pls!
Last call, is it ready? #1107748499078008952
Take it to the treads, plz.
#1107735514565574707 final call for feedback on this boy before he goes to the gallery
Hopefully done tinkering with this one too. #1106721619474399302
#1107411345466470581 any feedback would be appreciated
Hello spriters
Question
The guidelines ask for pngs to be submitted 288x288px large
workspace is 96x96px, do I move the 96x96 to the center of the 288x288 workspace
scale it up by 300% then move it to the 288x288
Scale up by 3x with interpolation off
anyone got any ideas to make this look more like a fusion?
or you think its good to go?
make sure to post it to spritework and link the thread in ur post
huh? I'm confused. Here's a ss of my png right now in a 288x288
The project, were I to export this, the png would be 288x288
if you scaled the project this shouldnt happen
maybe try downscaling it back to 96 X 96
well
I can
I'm not confused about how to do that lmao, I'm confused because the #spriting-guidelines mention to scale to 288x288.
"The finished sprite has to be a .png file that is 288x288 in size."
They also mention "Piskel: Beginner-friendly, easy to use, doesn't require a download. To resize cleanly, either export at a 3.0x scale using the slider, or click resize and set the width/height to 288x288 with "Resize canvas content" toggled." So I just have to scale it up?
Is that it
oh
duh
Yes, scale it up so each pixel is 3x3
Oh no it got crusty
yeah i took the screenie and downgraded it to 96x96 and thats what it came out to so i dont think they were using it to design
anyone got ideas for this #1107869890985074818 ?? i dont know if its done or not
they were, the screenshot just isnt 1:1 scale
it looks like you resized the canvas to 288x288, you just want to enlarge the image 3x with nearest neighbor scaling
I figured this out by the way. https://discord.com/channels/302153478556352513/1107831423823523940
I am good now
Now, sorry about this
noob to this-- how do I submit it if I don't have the spriter role
Do I really have to make three sprites?
I'm really proud of this one but if I have to do two more I won't be able to submit until like the end of tomorrow
which wouldn't be the end of the world
there's really no rush, you do need 3 sprites but if you cant submit them until tomorrow youre not missing out
alright
tomorrow then
Different question, how do I look up whether a pokemon fusion has been created or not? Is there a bot command for that
?tag calc
Here's Aegide's fusion calculator, which will help you see the type, stats and sprite of any given fusion in IF https://aegide.github.io/
you can also use discord search in #sprite-gallery
and then you can do a search in #sprite-gallery for anything not on there yet
also there is no rush because it takes until end of month for sprites to get added to the game, and in the mean time you can add it to your own game even if u arent a spriter 😄
#1107873693230714891 Do the arms read as featherless wings?
#1106097286221664307 ready to post?
#1107875996738265130 looking for feedback pls
#1107878003591086130 Please help me polish up my new little guy :3
post? #1107471208292823070
Total newbie here, just submitted my first sprite to the #1050404143807873157 channel. Could someone explain to me what the process looks like from here?
is my round guy ready to post? #1107885528625455204
#1107893158941048932 Need some feedback :)
Grimer/Cofagrigus (88.362) Muk/Cofagrigus (89.362) pale or bright
#1107895011036639292 thoughts?
https://discord.com/channels/302153478556352513/1107770424760221849 ((I posted the wrong sprite without the edits))
#1107898398457212948 currently deciding between shedinja halo or not if anyone as a preference! also taking any and all feedback :)
is #1107395708929187950 ready to go?
Any final thoughts before this monster goes public? https://discord.com/channels/302153478556352513/1107535067619807262
Has this fusion been made for a while?
If not then someone didn’t credit me for the garchomp pose
this cursed tangrowth, would love some feedback! :) https://discord.com/channels/302153478556352513/1107904325654683668
https://discord.com/channels/302153478556352513/1107551111767920671 Any thoughts on this cursed ass stunfisk/tentacruel
How i can make better quality for my Trapinch/Paras (i already posted, its for a update)
Do i can upscale him ?
I want to try a sprite but how can i downgrade to 96X96 ?
#1107917977657036830
Any feedback?
i love himb
went through some revision cycles; if anyone has further comments or strategies to make the halo slightly more proportional but still in perspective lmk! #1107898398457212948
@vital tree Please credit Kumagamer for the Garchomp base on your Rayquaza / Garchomp. Not crediting the people who make custom bases is rude and against Rule 6. 😦
Oh, wait. I didn't use a custom base for this fusion. The pose is based on a garchomp miniature reference i found. I didn't know someone made a base of it
Taking a closer look at the sprites, this makes sense.
#1107941133268561930 I would appreciate feedback a lot on this one! something seems off to me q.q
yeah the rayquaza garchomp fusion was made back in march and the garchomp base was posted this month
Looking at it closer, you're absolutely right. Sorry about that. 😅
Everything this week will be blamed on post-operation brain, so that is what happened this time as well. 😛
It’s the same picture I used for it 😂
So no worries just wanted to be sure
Was just shocked when I opened YouTube and saw the fusion
No problems ! It happens
#1107941133268561930 ready to be posted?
Are we allowed to make spritework posts about sprites not to do with infinite fusion?
yes, the non-if tag is for this purpose
Okay wanted to make sure
#1107966192225882112 ready to be posted?
Another draft of this creature, what do yall think? https://discord.com/channels/302153478556352513/1107551111767920671
Feedback? #1107964112568340510
#1107941133268561930 which one is better? (direction of the fire on the back wing)
pls vooote
The real question is do you think it should be landing or pouncing
anything i should add/change? https://discord.com/channels/302153478556352513/1105792609600938108
What should I do with these sprites? bcz Kiwi said that intenational transparency is ok but Rezza said that it's not #1107706284251291659
#1107903435711447051 which face? (difference is nostrils vs no nostrils)
#1107941133268561930 ready to be posted?
#1107913252496744509 ready to post?
#1107435373287723049 ready to post?
Are there any Breloom fusions that make it look like a prehistoric dinosaur
Like a raptor
ask #fusions
Oh thanks
@vast fulcrum Hi, I can't find your grimer/porygonZ in #1050404143807873157 - please make sure all fusions have a thread before posting them to the gallery!
#1107941133268561930 which beak position is better?
@real hamlet Hi, I can't find your kadabra/blaziken in #1050404143807873157 - please make sure all fusions have a thread before posting them to the gallery!
Should I add this as an alt or Is It ugly? #1107923624956006433
#1107993857485979678
Snake Hole
Thoughts on this weirdo? https://discord.com/channels/302153478556352513/1107989236000510013
#1107878003591086130 Ready to post?
#1108004356902629416 feedback is appeciated
Stringbeannnn #1108005148082585640
What do yall think? What can be improved? https://discord.com/channels/302153478556352513/1107968810054582354
@tacit prairie yknow that since they're on top of each other, your deoxys customs are kinda unusable right ? 
uh
it kinda works having multiple for rotom, but for most other fusions idk man...
happy ?
@nova void I literally just got up, but I have to say this: I don't think it works having three sprites in the same post like this. #sprite-gallery message
Last I've checked, they have to be completely separate posts.
Any feedback ? #1108018712944070706
#1103714487606968501 any last minute changes to dis lill guy needed before posting?
So Sorry! Ill create It in a couple of hour, i have not the file tight now. When in done i Need to repost It to gallery?
ready to submit? #1108004356902629416
#1107989684489027594 Are those good to go?
#1107882172628611164 which is better - whiskers or spots? I don't think there's enough visual real estate for both.
#1108036949094170744 Ready to add to assets?
#1108034547179855892 feedback would be very appreciated
#1108038450373996644 If you're good with colors and custom bases, feedback is needed!
Apologies for the back-to-back polls, but I got a suggestion that I think improved the whiskers version significantly, so for real this time: Which should be the main, whiskers or spots? #1107882172628611164
#1107988900514893874 quick question: which one do yall like the most out of these 2?
Ready to go? #1108005148082585640
The base for a future Smogon sprite; does anyone know which two colours I could remove from this? 😮 #1107699058438574121
Any opinions on it ? (Arceus/Giratina (315.345)) #1107842931013976085
https://discord.com/channels/302153478556352513/1107686968139186307 Any more feedback? Or ready to post?
K
Fixed it
are these guys good to go? #1104629834153468024
Ready to post? #1108036949094170744
Ready to go? 🙂 #1107699058438574121
Also, would this go in #sprite-gallery or #assets-gallery if I submit it as Salamence / Salamence? 😮
it'd have to be an alt because salamence/salamence is mega salamence
10 COLOR PALETTE HAHAHA
#1108056108301565992 shall it be cast into the files forever?
#1107775124192636989 tail or no tail? (or tell me if you have any other suggestions!)
#1108033954797338694 is it good to go?
https://discord.com/channels/302153478556352513/1108062898095407234 Any way to improve this would be good. It seems kinda... boring...
Bumping #1108058922612424764 in hopes of getting some feedback.
Legs or no legs? I'm thinking the legs should be an alt but I'm not sure #1108038701650559036
Version 1 or version 2? #1108045304177119272
do you think this is ready to post? #1103156720173330485
Any feedback or ready to go? #1108066477136937122
#1107988900514893874 Now comes the main reason this thread exists, any feedback? 
#1107771213046100061 any more feedback on this little guy or is he good to go?
#1107889579085807637 ccccould I get more feedback slash is this lad ready to go?
@wide finch You should mark both those Gardevoirs as alts since they’re not normal fusions, just references
Counterpoint: nah, don't want to. If they lose in voting, so be it.
https://discord.com/channels/302153478556352513/1108078857170469025 I need feedback!
I mean, the sprite managers will just have to make them alts then
do i need to make a new thread to get a fusionbot analysis for a finalized sprite? #1107898398457212948
(i know it wont get posted til my other two are done, i just want to check it before i close the file)
just update your thread
Any feedback for #1108082010217517086
@brazen ferry I think you got the names mixed up: that looks more like a Regigigas/Beldum fusion.
Ah made a typo, thanks for telling me
#1107780275192213645 changed up the metapod version.
Any more improvements that might need to be made?
Did some more work on #1108058922612424764. How are they looking?
Any final thoughts before this goes out? https://discord.com/channels/302153478556352513/1107968810054582354
what do you think ?
Shuppet X Honedge
#1107336644522156118 Final call, is it ready for the gallery?
#1108038701650559036 Is he ready to go? (also included is a leg day alt)
#1107411345466470581 any further feedback or should i consider this one done
?tag upscaler
Put your 96x96 sprite into this website and set the resize to 300% for a 288x288 sprite https://lospec.com/pixel-art-scaler/
thank you ❤️
https://discord.com/channels/302153478556352513/1108013407149490207
I think it just needs mod approval now? 👀
My first art, absol and flareon
please also post a link to your #1050404143807873157 thread ( #threadname ) so people can make comments~
@kindred oar pretty sure your fusion is supposed to be 22.31
Yeah I edited the post. Do I need to resend it?
Can't say for sure, but It might be safer 
Sure I'll do that now
Thoughts? If "not yet" PLEASE explain in the thread! #1108098237887426630
#1108099386178818068 lookin for notes, this is first draft!
(i know to remove the palette, its just there for ref)
Ready to post? If not feedback is more than welcomed https://discord.com/channels/302153478556352513/1106807202997600337
#1103366888907608114 ok i want to add the cradily legs, tips pleas
What are some super early route pokemon that don't have fusions yet ?
(it looks like the feedback request ping is role limited so if anyone wants to ping that for me i would be much obliged ;-;)
Ready to post? #1108034547179855892
Can't find anything glaring, pretty solid
You selected not yet, can you please explain in the thread?
#1108064814527434762 Good to go ?
#1107759212769054872 #1107330806344589474 Are these two done?
Any other changes? #1108105439880675379
#1107322809388109904 Any final thoughts?
@toxic coyote Delete your messages in the gallery and make a new proper post
https://discord.com/channels/302153478556352513/1108114872484515880 Any improvements?
https://discord.com/channels/302153478556352513/1107989236000510013 1 or 2? Also, any thoughts?
#1108126127148519424
thoughts?
#1108127673496109156 heres my fantasy fella for the day
Feedback about it? #1108127585407348837
#1108130000760229919 Feedback?
#1108132052601147434
Could I have feedback
Try the /feedbackpls command in your thread
#1108124720622215290 which one is the best? or if you have a better idea/fix, tell me
#1108135274606776411 Anyone else having trouble with the feedback command today? doesn't seem to be working for any of my posts
nope not really
It didn’t work for me either
Hmm, ok, maybe discord is just having a day
#1107916261272334406 good to go? if not pls let me know what to fix thx
Ready to post? Pls react I need to know if theres smth wrong with it😭 #1108034547179855892
would the left ribs be visible from this angle? Or am I good? #1107446783795286016
They would be visible
But not too much
Also the gild around the right shoulder should be more curved to match the other one
Feedback goes on thread please
Better? #1108127585407348837
quick question for when i get back: if i have a bunch of fusions off the same base, can i combine the threads into one? or shhould i post them all individually
Good to go? Any feedback is appreciated! #1107444797792325662
#1108152016355725322 please give me feedback for this little darling
I tried the feedback please command and it didn't work. Is there a certain amount of time a post needs to be up before that command can be set?
Or is there perhaps some other reason that it didn't work?
Spikes or no spikes for Machooper? I'm not sure how to make him look more wooper-y otherwise. (Leg day woop is an alt) 🚫 for no spikes,
for spikes.#1108038701650559036
#1108152016355725322 please give me feedback or let me know if you think it's ready to be posted 
Not really, that's strange
Yes, they changed it. If I remember correctly you need to wait 1 hour before doing the command
Okey doke! Thank you so much!
Who's that pokemon
... I don't think this is the right channel for that.
?? Oh shi
thats blue eyes white dragon
👍
or colossal dreadmaw
#1108166802074255421 feedback?
Okay, a bunch of changes (and one power outage) later, and this is what I have for #1108058922612424764. Any more feedback or are they good to go?
tried having the spoon part up top be more cardboardy and added some motion lines to the die since it seemed a little weird floating there
#1108127673496109156
https://discord.com/channels/302153478556352513/1107961508878618735 Hows this guy lookin?
The feedbackpls command keeps failing and nobody has commented for five days, so I'll ask for feedback here. https://discord.com/channels/302153478556352513/1106386907744706652
looks amazing but it looks like lava or magma so idk if parasect fits
Hm, is there something wrong with the 'feedbackplz' command?
#1107874764795682876 anyone got any ideas for this?
that thing looks sick already
It failed for me.
I actually tried to do the command on your thread, but it also failed.
im also debating on the fin and people say its just a recolor
I think that maybe you could just do what you did to the arm scythes
its basically a dnd monster so thats why it doesn't look the part 😅
... I actually tried to do the 'feedbackpls' command on another thread, and it also failed. I think there's something wrong.
what monster i love dnd
kalaraq quori!
ok if your basing off that why not make one thats been infected by a mushroom parasite and then add the legs
Take it to the threads, pls.
ok
So how long do we have to wait now between posting a thread and using /feedbackpls? I was told an hour, but my thread's been up for over 3 now and I still can't use the command.
The command doesn't seem to be working right now.
Yea, Lewa's thread's been up for a few days now, and the feedbackpls command isn't working. I tried.
Ah, well, in the meantime, I have two owl-bugs languishing in obscurity: #1108130332026351706 #1108171259830878208
hopefully last pass at this; I think the hat brim was the biggest issue with readability #1105078899303522305 message
This is my first sprite and I need both feedback, and someone to help me figure out why the fusion bot cant understand it. https://discord.com/channels/302153478556352513/1108181974541144124
Anybody got any good reference images for a 2 ball flail? Specifically being swung. Im trying to make a nidqueen/doublade sprite.
so sick!!!
#1106762791198674984 no rush just done for the evening and Feedback error'd. Will work on this more with feedback tomorrow 
#1107743795040231515 no rush just done for the evening and Feedback error'd. Will work on this more with feedback tomorrow 
if it's being swung, the apex of the swing of the arc is going to be the point at which the flail has the highest tension, so I'm pretty sure it would just be a straight line of ovals attached to a ball attached to a stick. Two balls function the same as one because it's following the same angular momentum. Regardless I found this https://www.youtube.com/watch?v=l47Idc7anG4
This is a tough, well made 2.2-2.5 mm (13-14 gauge) thick bascinet with 1.6 mm (16 gauge) visor. It's quite heavy and impervious to swords. The single-handed axe can dent it but it's basically just cosmetic damage. Even the hammer spike can't penetrate it.
The weapons used:
Knightly riding sword by Arms & Armor
https://www.kultofathena.com/pro...
#1108195204927856710 Any comments on how this line is looking?
Shedinja/Lugia (289.249) 1, 2, or 3? https://discord.com/channels/302153478556352513/1108140553624899725
#1108197525493665792 I feel like something is off ,but I don’t know what it is.
I am in need of assistance, I can't figure out how to gen 5 ify this ;^;
If i do @ here in my thread, will it ping the people inside of it or everyone in the server
#1108176620545659000 these two lads ready?
What fusion would this be ?
Darkrai Gardevoir or something like that
it just won't work
neither
wym
why not ?
because it is turned off in the server
otherwise people would be able to ping here and ping thousands of people
yeah that makes sense
(also at the start there i thought u were talking abt the sprite idea xd)
any comments on these two? (going to bed will look tomorrow) #1108204125436530800
https://discord.com/channels/302153478556352513/1108169348788531220 which one version of the chains?
#1108211191857295442 feedback apreciated
Any thoughts on this little guy? https://discord.com/channels/302153478556352513/1108010848577913035
https://discord.com/channels/302153478556352513/1108062898095407234 Any more feedback or even suggestions to change the sprite? I still feel the overall design to be kinda boring.
#1107842931013976085 I'm getting started but i need someone who knows more about making sprites to give feedback
Anymore feedback? #1108127585407348837
#1108220214102999110 thoughts?
#1108221795800199198 I completely redid my failure from yesterday (need some feedback)
@lavish jasper You might want to specify your Electrode/Banette as a joke alt in the gallery.
Heading to bed, can I get some feedback on https://discord.com/channels/302153478556352513/1107484539363790898 so I’ll know what to finish up tomorrow morning?
You need to change the filename too, so you need to delete and resubmit
what should i change it to just (101.357)joke
101.357a.png
ok thanks for the help
doesnt it need to have the name is sprite gallery or is that just to make it easier to search
Could use some more feedback for these two:
https://discord.com/channels/302153478556352513/1108130148420694017
https://discord.com/channels/302153478556352513/1108172860947714058
Think they're close to done if not so already, I'm trying to make a tiny alcremie for their alts but not having the best luck with that. Rhydon is already done, I'll be submitting them all together
#1106011968109805658 Thoughts?
#1108178427602796625 What do you guys think?
I know it's not the best rn but it's more of a concept than anything
Better? #1108127585407348837
#1108127673496109156 removed the thing by the head, how's it looking?
#1108216016342892567 looking for feedback pls
#1108236228538662982 looking for feedback on this one as well pls
@idle tiger Sorry to ping you, but you'll want to post each sprite independently in sprite-gallery, and follow the name/number convention you see on the other posts so that the bot can read it (and so they can be searched later).
https://discord.com/channels/302153478556352513/1108062898095407234 Quick poll, after which will delete in a short while
Is the right an improvement over the left? Also any more suggestions to make this less boring would be appreciated
@lavish jasper You need to have the Pokémon names in your gallery post
@idle tiger You need to delete your gallery post and make them properly
Dex Snorlax/Banette
Snorlax/Banette's IF Pokédex number is 150083! Its sprite would be named 143.357.png!
Where shall I paste the triple fusion sprite
#1108248084665880586 message looking for feed back! 😄
Dex Vigoroth/Slaking
Vigoroth/Slaking's IF Pokédex number is 130166! Its sprite would be named 386.309.png!
#1108201508945801340 any opinions on these Fellows?
#1108258930754342963 Feedback ?
#1108091971974725702 ( 75.1) done ?
#1108092413878227085 ( 194.360) post it ?
#1108092188065288222 ( 295.191)
#1108264207004205107 what to fix?
Last call for any feedback on #1107446783795286016
Ready to be posted? #1108152016355725322
#1108268318432972871 first draft, how does it look so far?
Which pose do you want Duskraid to have?
https://discord.com/channels/302153478556352513/1108265750273200148 Which eyebrows? Any feedback on colors or anything else?
#1108272146804912168 mooooooooo
#1108275896026152971 so u guys know the grootslang the mythical half elephant half snake from sudafrica well this really isnt based on it
is just the best my brain could come up with
#1108269934078869514 funny kirby reference and is there anything I should do to improve this or is it good enough.
hey is feedbackpls broke?
#1108287551636254821 also how do i fix the palette issues
#1107721340133322822 I removed the left eye and ear, moved the remaining eye and ear closer to the left to make it align more with how Fearow's face is angle. Added an additional tooth. Recolored the crest to match Venusaur's leaves and added lines to make the crest to look more like leaves
I'm not sure if I should make the nose less rounded, and how to make the face more recognisable as venusaur as fearow's head is so small in comparison.
Unsure if there are any resizing/half pixel issues as I used the original generated fused sprite from the game files and scaled down to 96x96
@lavish jasper please put the pokemon's names in your post please 
#1108272146804912168 fuck it, im asking again
Ready to post? #1107917084492566548
#1108228834836357202 any thoughts on this boy
Feedback? #1108293179389771846
https://discord.com/channels/302153478556352513/1108298934755000380
My "calling for help" command doesn't seem to work, so I'll ask for feedback here, if you don't mind :^
#1108056108301565992 Ok i think this is done in my books any advice
#1108317662934749236 please give me feedback for this one - is this Porygon-Z enough?
Good to go? #1107037310383554611
#1108318505926934528 bit of a fun request to get done
#1108317662934749236 which one did I sprite? (or rather: which one does it look like more?)
vote 1️⃣ for porygon2 and 2️⃣ for porygonz
#1108141089103294554 Check check, anything need changing on these before uploading?
#1107721340133322822 added the tail, changed some colouring on the wings, altered the nose a bit
#1108317662934749236 please give me some feedback
or is it ready to be posted?
OH thats what the emotes are for
one is for posting it, and the other is for "it needs work"
god i am dense
Make a thread about it
it says i need a tag
Then put a tag on it.
#1108151241286103072 message
What do you think? Do they need anything at all or are they good to go?
#1108064814527434762 Good to go ?
how do i link to my spritework post? im discord illiterate
You make #the name of your salon
Fixed
Soo I'm pretty new to sprinting and all that and the colour count of one my fusions is way too high. Does anyone have an idea on what I could do now because I feel a bit helpless zooming in and guessing where I could have used different or extra colours rn 
I hope this is the right channel for questions like these
Sure thing! Should I dm you?
youre all good to send it here
Will do
should have a colour count of around 50 due to being pretty busy and me not knowing there was a cap on colours at first
I could make the yellow stunspore-gas and particels the same colour as the skull on the body but other than that idk what to change to get to around 30 or whatever the max on colours is

yeah, the yellow, and maybe change the green to either the blue or yellow as well
and theres a few too many shades in the purple of the body
how can i make the fusionbot analize my sprit?
you name it correctly and then ping it as a reply to the image
thx! didn´t know the part with the reply!
#1108336167809716306 post or rework ?
#1108166802074255421 which tail?
Last call, ready to post? #1108127585407348837
should i do it #1108056108301565992
Is there a way to quickly check whether a fusion has a custom sprite already?
Search in the #1050404143807873157
#1108350110217289778
Feedbacks please
Hey, out of curiosity, would any of y'all say that 18 colors is too much on a sprite?
i think you can get up to 68 different shades so not really
on my last sprite at one point i had 193 colors due to an error in the shading so nope
I believe 30 max is the recommended amount? correct me if im mistaken
just looked it up, its 64
It depends on what you're making, like if it's anything with Smeargle it'll have a lot. For the most part keep it around 30 but if you go over it'll probably be okay
What do you think about my #1108330822139920444 fusion?
i think this is done #1108056108301565992
@storm raptor What sprite did you use for the base of Charmeleon/Mr. Mime?
I found it, Gengar/Mr. Mime by @round sedge. Did you get permission to use his sprite as a base?
https://cdn.discordapp.com/attachments/543958354377179176/727224589305774121/94.122.png
looks like it from the thread 🙏 #1107921004187090944 message
Ready for gallery?
#1108350110217289778
@storm raptor Then credit him in the gallery post
Okay, good. I'm something of an original palette purist, so I try to stay as close to 15 or 16 as possible.
Also @storm raptor your mr mime fusions should be the other way around, ie. Charmander/mr mime
Oh ofc
ah thanks
You need to delete and reupload them to correct it
Also mention specifically it was Gengar/Mr. Mime by Xoto you used as the base for that one
deal deal
When do i unlock the safari
what do you think? (also which one is better?) #1108371173454131321
Mmm, do Aegislash fusion sprites and what not need to have both stances or is that just a beneficial thing?
#1107989684489027594 Good to go to the gallery?
@median wyvern Delete that random smaller sprite you posted to the gallery
#1108130332026351706 Last call for feedback before I post.
#1108389575186989156 What do you think ?
#1108393463071916113 feedback is appreciated
@sullen pendant May I use your Dragonite/Dragonite sprite as a base for Dunsparce/Dragonite?
Go for it 
#1108382104410140692
which version is the best?
Should I now post my 3 creations ?
#1108393463071916113 more feedback is appreciated
#1108239938404745307 #1108171259830878208 last call for feedback on these two before they go to the gallery
#1108201508945801340 opinions on these little superheroes?
#1108412124725784596 Any feedback?
#1108416419416264844
Any feedback? This things is supposed to be 10 colors but ima need some help finding the dude colors 
#1108413138719739965 Is it ready or is it missing something?
#1108393463071916113 im in need of feedback
#1107721340133322822 Feedback pls?
Ready to go? #1108412124725784596
Any final thoughts? https://discord.com/channels/302153478556352513/1108226339116437506
ready to go? #1108393463071916113
#1108430076082651219 I need a vote on this. Please visit the thread for more context.
Like the logs?
Goood to go? #1104170298506485780
@tender hawk I can't help but feel that your Sylveon/Lati's colors are mixed up. Don't know if that's intentional or not.
its intentional
what you think of this chonky fighter? #1108439732163186738
ready to post? #1108293179389771846
#1108442757573382155 Ready to go?
need a opinion on my little baby #1108450411192528936
#1107288622266318969 Tried to make the bubbles a more visible on lighter backgrounds.
Any feedback to further improve is appreciated
Mantine/Meowth (226.052)
ready?
https://discord.com/channels/302153478556352513/1108451618694905938
@round vessel these really should be separated #sprite-gallery message
If one of the sprites I submitted a few months ago isn't credited to me in the game, repo, etc. how do I get that fixed? (not credited to anyone)
#1108127673496109156 any thoughts on this one?
what is the difference between the normal, the a or the b option in the spritework map?
#1107710937462481047 is it good to go or no?
@round vessel You need to repost your Porygon-Z/Flaaffy alt. Editing the post will not do any good there.
Thanks
@candid coral these should be separated #sprite-gallery message
#1108281373132865556 which leg connection to the pelvis looks better? accidentally sent the 96x96 file for the second whoops
@median wyvern edit your title#sprite-gallery message
Why is it bad ?
Warowak
Right
#1108382104410140692 what looks better?
2
#1108459423648723084 Are they ready or is anything missing?
#1108419738205429800 ready to go?
how do you tread
https://discord.com/channels/302153478556352513/1108404717857546341 After a few iterations I guess its time to run the gauntlet, is it ready?
up
#1108459423648723084 I'm asking again for feedback to make sure if anything is missing
@oak parcel Remove the 0 from your Mantine/Meowth file name.
ok
finally got back to this one #1107422930008293396 unda da sea?
#1108379328758169620
Are they done?
#1108166802074255421 finished?
@fleet thistle The bot thinks that your Volcarona/Poliwag is a Ferrothorn/Poliwag.
how to properly call fusion bot (sprite analyst) to check your sprite?
omg why
Probably because you gave the fusion the wrong dex numbers.
found it thanks
I also have weird problem with poliwhirl, half pixels came out from nowhere
In your thread reply to a msg with a sprite and tag @ fusionbot
The file needs to be properly named
I deleted the ferrothorn one from gallery, will try to solve other issues
#1108476910868123680 and #1108470897540608152 please give me feedback or let me know if you think they are ready to be posted!
any feedback for Blaziqueen #1108234197698617364 ?
which one should be the main, and which one should be the alt? #1107422930008293396
2nd main 1st alt
#1108483262545924176 ready to be posted?
When a sprite is updated in a spritework thread due to feedback, should the image in the first post be replaced?
how do you link your spritework?
no its not its always your first version to my knowledge
Channelname minus the space
That wasn't a technical question, but a question of whether it would be a good idea to edit the post to change it.
#1108166802074255421 finished?
looks good to me
no, you dont need to edit the original image
just post it in the thread
tbh, i dont think you can add a new image to the 1st post
Yeah if there's a way to do that, I haven't found it yet. lol
Oh, I guess not.
I can't link my spritework
type # threadname
Dumbass question, but does anyone know if there's a tool in photoshop that works like the pencil but selects instead of draws?
#1108470881040216106 Any issues you notice, or suggestion you have to improve this? Please let me know, any feedback that can help me improve is extremely appreciated!
#Snorlax/Yamask (562.143)
According to this you haven't made a thread
ok and how do I make it
Oh I lied I apparently don't know how discord works
no it is made, but it is closed
you need to open it
Yes that
it closed after being innactive
thx
#1102760409771020359 @cold stirrup a single message in it opened it up
or you fixed ti at the same time
i did nothing so ye typing something worked
anything else i should add to this #1107459116294750209
#1102760409771020359 is it ready? (also found out I wrote wrong numbers)
https://discord.com/channels/302153478556352513/1108265750273200148 Last call for more feedback on my cat dog Kung Fu man!!
anyone see this?
#1108484694703616000 Design feed back is wanted. Struggling a bit on this one.
#1108488685764227092 ready to be posted?
#1107459116294750209 Ready or not?
#1108492435035783168 Any feedbacks?
... I think I should not give feedback anymore...
why?
any reason?
Because I literally cannot give any critique whatsoever in regards to making them 'fit' the Pokémon style.
Nevermind that I'm not sure what constitute a sprite as Pokémon style...
you can help with concept tho which is important
No I can't...
Does someone has the berserk reference sprite of Lucario and aggron? (Lucario first, Aggron second)
you helped me with concept the other day
A lot of good that did... (sarcasm)
You've posted this 3 times in the last 30 minutes. Post it once, give 24 hours time, THEN try another method of gaining feedback if you're still not satisfied. If I don't get any feedback from multiple sources, over the time of a day or few, I take it as it's ready and post it.
#1108127673496109156 any other thoughts on this or is it ready?
#1102760409771020359 you guys think it is ready?
#1108496188212269177 ready to be posted?
ok Ive just posted it right beofre a few other people and assumed it may not have been seen
#1108481290128338964 message Looking finished? Anything that could be added or adjusted?
#1108503447508107445 ready to be posted?
Any more suggestions or ready? #1108439732163186738
#sprite-gallery for individuals or #downloads for spritepacks
#1108166802074255421 should i post this as an alt?
Last Poll Shedinja/Lugia (289.249) 1 or 2
Hey, I want to make a few sprites, what program should I use and where are the sprites stored in the game files?
Just make sure ur drawing in 96x96
Have been working on #1103869491349303356 for a while and was thinking for a while to post it, think it is good?
Female symbol? ♀️
Haha no supposed to be more of a cross shape I guess
ready for posting?https://discord.com/channels/302153478556352513/1108511304311914550
Okay, I uploaded a sprite to the Sprite Gallery and then noticed a mistake I had made that I (nor anybody else) did not notice. Should I simply delete the original post in the gallery and upload the fixed version? or is there something else I should do?
#1108513132386713643 please give me feedback or let me know if you think it's ready to be posted 
Ready to post? #1108204542706851860
working on my first fusion (riolu/teddiursa) sprite out of three to become a spriter here. how did i do?
oh whoops the right foot isnt outline properly
?tag spriter
To apply for the spriter role, you need to make 3 Pokémon fusion sprites and apply for the role in #1073793514229485638
You need the spriter role to post your fusions in sprite-gallery and for some contests.
No tag Spritework found.
?tag spritework
Make sure to follow the #rules!
Rule 9: Sprite Feedback. Sprites must be posted in #1050404143807873157 and receive feedback in threads before going into sprite-gallery. Nobody is exempt from this rule, no matter how perfect you perceive your sprites to be. Design suggestions do not need to be acted on, this is more to catch low quality sprites or errors that the spriter may have missed.
ah whoops
Can i add shiny versions of my fusion to the gallery?
Yes
As an alt?
@deft nova Perhaps specify that your Psyduck/Kirlia is a joke alt?
write shiny and add an a like if It was an alt
Im leaving up to sprite managers cause it'd be funny if it was main 
Like… Name/Name (12.12a) shiny ?
Yep
#1108514365235265626 please give me feedback or let me know if it's ready to be posted 