#is-my-sprite-ready
1 messages · Page 7 of 1
#1045011728620068975 can need some luv ❤️
#1045026155998220318 thoughts?
Good to go? #1044133621704949793
Share your thoughts!
sticky
Looking for info on the Aura Sphere in #1045053327202861066
#1045011728620068975 Updated
how to post something to sprite gallery
#1045097192425279528 seems fine for me 🙂
Anyone know who made this?
@latent cedar You have to post all sprites in #spriting-discussion for feedback and make threads
oh sorry, just got the role
and you have to receive feedback first
sorry again
no prob, just be sure to receive positive feedback and/or no technical feedback first. it's all listed in the #spriting-guidelines
#1045079407657746462 #1045072180104417312 #1044898287360163881 any feedback is appreciated!
I'd recommend you to go through the technical part of it to be sure that you know the rules 
How do you post a sprite request? I'm sorry, I could not find the answer after looking in a few channels
Hey @distant nimbus! Do you want to request a sprite? You can do so in #sprite-requests with the following command (don't include the [ ]; write "none" if you don't have anything specific in mind):
?request head/body [requested user] [additional notes]
For example:
?request Bellsprout/Stunfisk @Kiwi#4199 Make it super derpy
?request Ditto/Muk none none
Please read the pinned message in #sprite-requests before requesting anything!
@hexed moth your Lugia/Lapras has sooo many half pixels right now 
looks like the resizing failed somewhere
did you resize it to 288x288 right from 600x600 that you had?
yea, you should resize it to the original scale, which is 1x1 pixel per dot (your 600x600 version is 8x8 pixels per dot so you have to make it 8x smaller, which is 75x75), then make the canvas 96x96 pixels size, and then resize the whole pic to 288x288, which will result 3x3 pixels per dot
thanks for the reactions Deino
lol
I'll take both sprites out from the gallery for now, just re-post them again once you have 3x3 pixels scale on 288x288 canvas 
@sleek skiff i think i got it?
not quite 

still has half pixels
you can probably fix it by hand from there
do you have a 1x1 pixels per dot version or just 8x8 pixels on 600x600 canvas?
i have a 1x1
nah, they have a half-pixels-less version
then
- put it on 96x96 canvas
- resize the whole pic to 288x288
most programs let you resize the layer to image size maybe that would help
#1044687814559805550 any more feedback?
can you show me your 1x1 pixels per dot version?
here u go
tbh idk either 
but the 1x1 version seems alright and I just did what I said before, turned it from 96x96 into 288x288
wrong interpolation maybe?
might be the problem in the program you use
just to be sure, the version i just downloaded from you is correct right?
yep!
@rotund juniper You closed your thread very quickly so i couldnt tell you, but the magcargo ones arm looks like its in front of the body
Oh balls you're right...
I'll fix and then resubmit the new versions after work tomorrow
also do you planon submitting tho one with the horn?
Misdreavus/Lopunny (200.354) any fixes/comments? The legs felt too big so i made them smaller #1045111380048609320
Wasn't planning on it, but for sure can do if wanted to. Will need to mess around with flame colours a little more
ah understandable
#1045074330826047589 Is this resembling aggron enough? Is it wonky? Could use some feedback
anyone know how to fix this shading wise, idk what i did wrong but i just
it looks nothing like how i wanted the shading to look
basically, i've seen some slight confusion in #spriter-general
... the ear ont he right isn't wavy its just fucked up shading
this ear right here isn't meant to look like that at all and idk how to go about fixing it
that is what i need help with
do you guys know how to make the pointy part of aggron's helpmet looking thing adapted to sudowoodo looking good?
Is this #1044950694240714752 dude good to go?
As well as this #1044950513680130078 dude?
Hey I was working on a reuniclus/aggron and I wanted to know what do you guys think (I took the original stories and I'm doing it some changes, starting from the head)
Next i think it will be the arms or idi what you guys think
reuniclus absol ready?
First arm prototype
Hey guys, I’m trying to make my own custom sprites. Can someone suggest a free app/software and the size pixel brush you use for making sprites and maybe some techniques please?
guys im boutta just draw my own third atennae thats like aggron's sharp bit on their head
i have failed to get the size right
#1045026155998220318 i have given the plant thingy a realistic hand.
Reuniclus/aggro (work in progress)
🧵
What's that?
generally, you're supposed to post to #spriting-discussion then turn it into a thread, then post here to draw attention to it if its been a while since people have commented on it, or if you have a small poll you want to.
while also linking back to that thread
in what sense
does using a custom base sprite by someone count as a collab? (I know you need to ask them, but idk)
Like when voting happens there's usually a theme
you mean polls concerning sprites?
Yes
Oh...
it's more like "should this hand go here" or "is this design better than that one"
So I can just upload any Pokémon fusion?
to the #spriting-discussion channel, yeah, as long as it's makeable in game and fits the criteria in #spriting-guidelines
#sprite-gallery is the stuff that actually gets in game through the spritepacks
essentially yeah
or you could just not
like
i've just been making stuff for me, mostly
getting input for it for improvements
if you want to get your sprites in the official game, though, you gotta go through the process
Ok
The process is pretty simple tho, at first I just wanted to make sprites for my team members but ended up getting enough for the role
Oh i see, thx
Make sure to turn it into a thread tho
I like it
Anything else or are we good to go? #1043299514645237892
Don't forget to post the thread
I like the sound of this but can you elaborate (and take it to the thread 😅)
Give me a sec
Anything else you guys think I need to do? #1045189009141415986
remember to add a link to your thread
He literally the dollar store version of 
WHOOPS MY BAD DIDNT READ YOUR NAME
HAHAHAHA
ITS FINE
I LOVE THAT ANYWAYS
Thoughts? #1041209518010400838
Still looking for advice in #1045186122906615828
looking for some tips on how to redraw in #1045163392714936430
So i made a sprite that already exists, is that an issue?
i didnt look before i started, i shouldve
So I've been trying to get this to a place I like for awhile but I keep feeling like it looks dumb, #1045249149093826630 , which do you think is better, the attempt to look normal or playing into the silliness?
#1045259003824975942 , think it's about done, look ready to post to everyone else?
#1045148216401874945 Any feedback on these? My first go at fusion in a while, found out about the game recently and wanted to try my hand at it. Used to mash up pokemon sprites as a hobby years ago
#1045318147852484628 these two ready?
@fickle nymph Have you been posting threads for your sprites? If so, can I have the link to the Azumarill / Feraligatr one please? 🙂
If not, you should post threads for every single sprite that you make, they have to go through the feedback process. 😄
yaaa
#1045337416325660684 he good? also have a varient with a sun
does Flygon fused with Flygon not have a unique model?
dont think so?
Nope.
There are fanmade examples of Mega Flygon that could be leaned into, but obviously we don't want to wholesale copy from the designs of someone else.
Could I get a bit more feed back on this boy? I feel like it's not quite right and need some more eyes to look at it #1045168238729900102
#1045361969160540250 pls check what the post says first
#1045378798788558869 Thoughts?
what are some good deino ones
#1045074330826047589 I have my own leaning and these are WIP but could use a poll on which of these is a better approach for aggron gengar.
#1045378798788558869 Postable?
@shut prawn Are you sure this deviantart level design is appropriate?
It a green spikey machoke with beer belly
all the machoke/machamp ones are gonna be a bit ... uhh ... "manly"
if lopunny can have thighs, machoke/champ can have MASCLES
Come on, you know it’s not just a normal fusion
it looks pretty normal to me, maybe you have been spending to much time at the wrong side of the internet :v
I can see where you're coming from... But at the same time
If these can make it into the actual games, i think Quillchoke is fine in a fanmade game
(sorry for image spam)
I don't think this is finished, but I desperately need help from the experienced spriters #1043280918959374396
Clearly you don’t see the issue
We've had worse imo, even excluding sjoba's stuff
But i aint a mod so im just giving my two cents
I suppose
Quilfish is a puffer fish, theyve puffed out machoke, theres no nsfw parts at all. Like i said i can see where you're coming from, but at the same time you're right i dont see the issue o 3o
I just realized I haven't added any of my sprites to the charts or anything, is that something we need to do?
They get updated each sprite pack
ok i wanted to test putting a sprite in game. i got the size and type of the pic right. labeled it B and ordinal one A. for some reason its only shows up in sprite select. every where else is blank
so i need to save it in other place too?
Don’t put any letter in the name
if you want it to default. keep the name 69.420.png
rename the one its replacing with "number"."number""letter".png and put it into the alt folder so its not lost
i wanted to test to see how it works
That is not Pidgey/Zubat, that’s Zubat/Pidgey
Did you have the game open while making the copy cause that migth be it
ok i got it to work
wayy
it was keeping the ordinal one as is and only putting a letter at the end of the alt
i tried putting it in the alt folder but that didnt work for some reason
but i will steam out the small stuff later
ty for the help
#1045427556997926932 Still WIP. Kinda needing lots of Help/Feedback. Thanks you all!
#1045361969160540250 check the first post
These guys good to post? #1044100987352256513 #1044103689557770320 #1044418025253777509
last call probably for #1045416835719368725 fixes
Last call for #1044687814559805550
I don't personally see an issue with it, it's a fun fusion. 😅
Done a few updates the sprites in #1045148216401874945 I think they're pretty much done, but let me know if there are any more things that need tweaking
looking for advice after these major edits in #1045448801852342313
#1045427556997926932 looking for feedback after some updates, thanks you all!
Howzit? #1045443142658293810
Yo could some people suggest a free program I can use to make sprites?
Try looking here ➡️ #spriting-guidelines message
Thank you
Paint.net and Krita were my go-tos before I paid for Aseprite
i'm a filthy gimp addict
used gimp for modding in the past, used gimp for editing after that, use gimp now for pixel art
Well now I have 3 apps to try. Thanks guys hopefully I can find the one that works best for me
Evening everyone, was wondering if this looked ready to go #1045139082814181456 ?
Quick question, who does most of the honedge/doublade/ageislash fusion sprites?
There is no answer for that
I guess there is an answer but finding it would be kinda hard
youd have to count who made every honedge/doublade/ageislash fusion sprite and see who did it the most
but I dont see the reason for that
Advice in #1045522932585222174 ?
Any advice on how to draw the legs would be appreciated #1045443142658293810
wut do u guys think
#gengar gengar
You need to actually made a thread in Spritework
(don't forget to see how other people are doing it)
how do I do that?
sorry I'm new here
@atomic aurora can you explain him, i'm on phone
yee
make a post in #spriting-discussion with the image attached titled something like haunter/haunter, then in the top right corner when you hover over it, click the # symbol to make a new thread
you'll have to put a message in the thread to start it, but generally people just start the thread with random nonsense
the pins in spritework should explain everything else
Is this a bit too big
For a sprite contender for Aegislash Magikarp
image size is correct, so it'll work in game, but it might look a bit weird
generally there's about a 10-15px gap on each side of the canvas for pokemon sprites
if you want to get more feedback you can always post in #spriting-discussion
uh, am i crazy or is the lighting coming from the wrong side
Yeah it is
Its fucking everywhere lmao
Lets say theres lights on both sides
uh I think I did it correctly?
need to right click it and make thread
How does it look now
A guy called out Aegikarp's awkward tail position
So it looks 10x better now
put it in spritework and give it a thread
Ok
don't choke questions with a bunch of feedback and looking for tips
Gotcha
Sorry if this is the wrong channel. But after looking at some of the sprites, to get this right before I mess up: For volcarona/magnezone, it should be the body of magnezone with a volcarona head and most of the sprite should be volcarona colors?
yes
#1045478775355363409 #1045498815978938478 #1045485930053640262 Any other feedback on these? Can't implement right now, but will take a look after work 🙂
is it alright to use colors from the body pokemon's palette as well or is that frowned upon
depends on how i guess
#1045667353175793684 anyone can help me out with the wings ?
Is this #1045659434392752148 dude looking ok?
#1045690093987430401 Any work needed, or postable?
#1045427556997926932 needing a bit of help with shading and feedback in general. Thank you!
#1042997842383470603 Last call before I send it to a sprite manager
ready? #1045712142889930853
Ready to post or is there something that needs fixed? #1045522932585222174
#1045026155998220318 now with arms! thoughts?
ik I made a thread for this already but any advice to male this look better. #1045600760156659713
@unique bone post the #threadname with it for easy acces for help
there u go
Last call for any feedback on my Litwick/Lampent/Chandelure + Cranidos Fusions #1045148216401874945
Howzit? #1045443142658293810
#1045749022599692299 Which one?
Maybe the second one as an alt
Howzit? #1045443142658293810
Any feedback on #1045478775355363409 ? Got a few Not Yet reacts in Spritework, but no comments. Any feedback would helpful to fix 🙂
Ready to post or does it need work? #1045723775884337213
Does anybody have some custom breloom sprites? (idk if this goes here)
Can I get a few opinions on #1045860397984526347 ?
I am torn between two difference faces XD
You can check the latest mass sprite pack in Other folder
Seems like Breloom doesn't have any, it goes from 354(Lopunny) to 360(whimsicott)
😥
Which crystal, red or yellow?
there's the one or two poll
Thanks for the vote! Ready to post or does it need any further adjustments? #1045723775884337213
Any more adjustments needed for #1045485930053640262 or ready to post?
Ready to post? #1045555872358735974
I need to find a mouse for the Porygon Z/Ratatta fusion I'm bout to do (also the Raticate as well)
How advanced can a mouse get
This is the first Google image for "most technology advanced mouse"
(yes that's what I typed)
The guntroller
@dull orbit @alpine lake you have to make threads for your sprites in #spriting-discussion
Looking for advice on this goblin in #1045881761432870912
Which one doesn’t have one?
What?
Which sprite doesn’t have a thread
It has a thread now
Any advice in #1045918275512578119
#1045909239232725012 taking a vote on if these are ready to post. one's an alt
Critiques so far? #1045938660182347788
First time (at least is better than nothing)
How many bits are there in the Gen 4 sprites
I love how spherical it is
they are 80x80 if thats what you mean
Ok thanks
I made a 250 X 250 will I have to scale it down I feel dumb because it is mt first time and I am almost done with the sprite I am working on lol
288x288 is the size the final product should be but 96x96 is the easiest to work with and can just be sized up by 3x
What all your recommended apps on doing custom sprites?
I just use piskel but at the top of #spriting-guidelines there are a couple recommended ones
I used to be a Paint only, until I spent some time with piskel
Quick question, is there a way to change the animations of certain moves, I'd like to change sacred sword from its current animation to an anime esc black and white slash cus that sounds cool as hell and it would work really well with my mawile/ageislash fusion
Find the image file for that move in the game folders
Cool now I just have to find someone to make the sprite lmao
Dewgong and Wobbuffet forward and backward
While simple, is it ok?
love the wobbufet/dewgong face, although the blue tail fin lines seems a bit too light for some reason?
Also please post them in #spriting-discussion and then make a thread to receive feedback
#1045989685329137674 feedback?
any input ? #1046047996216868864
Not bad. I see you got some webbing going on in the legs, which is interesting.
Yeah, meant to kinda mimic the raised part on Quagsire's tail while still being identifiably zubat tails
hi im back again with another fusion
#1046069595301232671 any suggests or smth
wheres the thread
This one good to post? #1045498815978938478
hi how do i navigate the #sprite-gallery i wanna search for a specific combination
https://aegide.github.io/ Is your best bet to show you everything already in the game. If you're looking for something new that hasn't been added yet searching the name of both pokemon in the discord search seems to work for me
oof there's not a proper sprite for what im looking for thanks for the help though
you canrequest in #sprite-requests if you want, read the pin to know how
#1046091683160399933 last pass, how we doing?
#1044004040100548680 anymore input for the line?
#1045991659353145424 any feedback is appreciated
looking for more feed back on #1045918275512578119
Looking for feedback in
#1045891521905430609
#1045940097364795464
#1045952230001479731
Can i post it? #1046082696746639491
Guys How does it work to male your spritework into the game?
If you just want it for yourself, add it to the CustomBattler folder under graphics. If you want others to use it, you need a spriter role
Ok thanks
Last call for feedback- #1045881761432870912
Reposted cause i forgot to spoiltag. Needing some help on doing a leaf skirt/ dress #1045427556997926932
You linked the scarlet and violet main channel btw
Right
Changed it
Can I do garchomp and deoxys fusion?
Seems theres no sprite for it. Go for it
Alright
Howzit? #1045837447055028224
Any suggestions? #1046157346910523525
Progresss. Any suggestions?
You're gonna need to read #spriting-guidelines
But there are already problems that should be addressed, like the jpeg artifacting
The left image shows what jpeg artifacts are
You need to use pngs
Ok
y not both eyes?
the other eye just.. looks wrong. :T
🧵

Good to go? #1046157346910523525
?tag halfpixels
Half-pixels are wrongly-sized pixels, usually created when working with sprites that are resized to a 3x scale.
Since all sprites used in IF are sized up from 96x96, every pixel is technically a block of 3x3 pixels. If you now work in 288x288 or any other size that isn't 96, it is possible to create pixels that are not 3x3 blocks. Having these in a sprite will make them look extremely janky and distorted. Those are half pixels. Avoid these at all costs.
If you resize the body part of a Pokémon to make it fit the base, even if working at 96x96, you will get double-sized pixels or larger. Those also count as half-pixels and should be avoided by polishing/redrawing the lines.
Resizing to a scale that isn't a multiple of the original image's size will also result in half-pixel, e.g., if you start with a 80x80 canvas and resize to 288x288. This can be avoided by making sure you're on a 96x96 canvas, or failing that, always resizing to a number that's exactly 3x your canvas size.
https://media.discordapp.net/attachments/700790080175996938/909896436202745926/half_pixels.png
ty, where do you see those?
Everywhere, you won't have any if you do what it says to avoid it
Anything I need to do for #1046163325924421742 or #1045881761432870912
Oh you're right I see some of them now. I started from a 96x96 and resized to 288x288 though so I'm confused on how I made that happen tbh
You either didn't do that, or you edited it more after resizing
I posted another version did that fix it?
Seems like it
thanks for the help mate, appreciate it
#1046178387036745768 :hell:
Guys I'm working on a reuniclus/aggron fusion and I'm kind of stuck, can anyone pass by and give me some tips and advices? #1045178811739816007
This is the base design
Which? #1046177306827296820
Any suggestions? #1046189643319742624
looking for advice in #1046182650920042516
Can someone tell me if the legs look okay? #1046197060816347179
Where can I find a collection of custom bases for pokemon? EX. #spriting-discussion message
search "in: sprite-gallery custom"
Thanks!
Good to go? #1046189643319742624 #1046201584394174515
Check the sprite pack alt base sprite folder
Last call on #1045498815978938478 and #1045639493052542977
Can i get some feedback? #1046184226590044250
Which one is better? #1046214192622993418
Polls are overwhelmingly 2! It shall be done
Ready to go or does it need work? #1046182650920042516
Good to go? #1046189643319742624 #1046201584394174515
Good to go yet? #1045918275512578119
@molten yacht Your Pyukumuku/Teddiursa has half pixels due to uncorrect resizing
if you don't have any feedback, please post a reminder in this channel, sometimes waiting a few hours isn't enough because people live in different timezones and can miss your sprite
Oh shoot, thank you i didnt realize that
for example, when you just posted it, it was 2 am for me 
Is there any way to take it out?
yea, just delete your post from the gallery and post it in #spriting-discussion with a new thread and fixed size (you probably downloaded a 80x80 teddiursa sprite and didn't change the canvas to 96x96)
if you don't have any feedback, I recommend waiting at least 24 hours and posting it here a few times while you're waiting
it prevents technical issues, like resizing issues that we have here, that people might miss in inactive hours 
Thoughts so far? #1045938660182347788
I took your sprite from the gallery just for now since it has half pixels, which is a major technical issue, but don't be afraid and feel free to make a new post in #spriting-discussion with a fixed sprite. If you lost your sprite and want me to give you the half-pixely version, feel free to DM me, I saved it just in case
Thank you its appreciated! Sorry for the inconvienience and delay, i was makin dinner
Working on doing a larger beedrill drill (rest of the sprite pending, so no thread). Which version? Leftmost is standard, just bigger
well that's pretty decisive. Does version 3️⃣ look solid on like a detailed level or are there bits of the spiral to adjust?
spiral looks fine imo, none of them seem to have shaping issues
sick
Good to go? #1046260236442411078
im not a spriter, but I'm just curious. are the sprites made, then reviewed before putting them in the game?
Last call for suggestions #1046201584394174515
unless ur a spriter god, then yeah, all of them r reviewed prior to being posted
Is this good to go? #1045878274246586409
we make them, get them reviewed, and then if it passes quality control it goes into #sprite-gallery
where they might be added into the game
no problem ^^
Good to go? #1046218864268152912
It really depends on what the fusion is to decide which of these to use
I suppose that third one would work since it’s like a drill for drilling into the ground
96x96 is the working size, then resize to 288x288, view #spriting-guidelines for more help
tyy
Any needed changes? #1045938660182347788
I wouldn’t make any
Any thoughts? Second try on something I have never done before
It looks bad, but any suggestions
You need to post in #spriting-discussion and make a thread in that channel
K, did a few smol edits, anymore before i post? #1045938660182347788
Any changes or good to go? #1046219832598741093
Will the steelix sprites be changed at some point? I don’t know what the creative process is but they seem to be a little off when steelix is the body.
unless if a spriter chooses to use a custom base, the gen 5 sprite is usually used
K, are we finally good to go? #1045938660182347788
After getting my previous version basically ripped to shreds, because it really was not nearly as good as i thought, I tried again with some help. This one better? #1046197060816347179
HEy guys ineed critique on both of these before i post em to sprite gallery ! #1046313640967549009 #1046313367373094972
i need som comments any suggestions to implement thx #1046324707340865596
Which tail? Also open to any suggestions :) #1046343544601837598
1st tail looks better
Any feedback on #1046097677538041887 and #1046109329473945631? Or good to post?
my question .. what is this?
A lileep honedge
ready? #1046456705933922426
#1046097677538041887 Which is best, with or without pattern?
Are these guys ready to go? #1045886407262085120
#1046341572192645201
Would appreciate some suggestions/constructive criticism for this sprite!
Ready to go yet? #1045918275512578119
good to go? #1045930191811264523 @ripe summit
Hi, I'm making a ptu (Pokemon tabletop united) campaign, and I'm making some fusion encounters. I was wondering if it's ok if I use the sprites
you will have to ask each of the spriters whose sprites you want to use, theres nobody here who holds authority over all of them
Ok
#1046244127001559180 Any more feedback on this guy?
Cute
Is this good to post? #1045473709957328979
looking for help in #1046489583715627008
Feedback for #1046497669838819429
Once again asking for Feedback on #1046197060816347179 before I send it off
Any feedback on this one or problems that stick out? #1046498541381628075
third is sonic 😱
Good to go? #1046488889382158386
Anything else needed? #1046500860152254535
is there any unown king fusion?
Needing a lil bit of feedback on this,thanks you all
Ready to go or needing work? #1046489583715627008
Need some help on the shading (or other issues you notice) #1046343544601837598
#1045427556997926932 Wich one should I pick? Flower colored or Black Ribbon and Gloves
Good to go? #1046510260791296121
maybe flower ribbon and black gloves?
gotta see how that looks
Vote 3 on original poll for this one
Finished the Yanma/Shinx Line. Feed Back Appreciated #1046497669838819429
@gusty vigil I had this WIP idea for Moltres/Swampert. If you like where it's going I'll make a proper thread, otherwise I'll let someone else take it on. What do you think? (thumbs up or down will do, or DM me)
||I did donphan+donphan to become grand tusk, if I also want to do iron treads with who can i fuse it?||
Klinklang
Opinion on diglet wiglet fusion? The name for it is ||dwiglet||
Do you guys mind helping me resize it?
make a spritework thread if you're looking for feedback :>
any suggestions? curl or no curl? claws or no claws?
hitmonlee/jigglypuff if it wasnt obvious
I like it better with the curl, but if you want more feedback you should make a spritework thread
ok thanks
I prefer the with curls no claws
How do i create sprites for pokemon who dont already have customs
Could someone help me with resizing
This is my first fusion sprite, opinions?
you may want to read through spriting guidelines when you have a moment, but if you're looking for more specific feedback you should make a spritework thread
How do I make a thread?
post your sprite in #spriting-discussion and then press the little "create thread button" when you hover over your message
this one
Thank you! Discord on mobile is confusing
Anything wrong with my sprite? Any half pixels?
Good to go? #1046343544601837598
Howzit? #1046177306827296820
Just made two sprite requests, in #1046587360957169804 and #1046577059905937468 , looking for feedback on both
Last call on feedback for #1046243445087404032
Good to go? #1046499944447619194
I am once again asking for feedback in #1045918275512578119 or #1046497669838819429
Good to Go? #1046501314688987166
Good to Go? #TorterraVoltorb First Sprite BTW
Yeah, you’re not going to be able to sprite on your phone, it saves everything as jpegs and ruins the image quality
Phones are annoying
Is there anything i could do?
don't forget to create a thread in #spriting-discussion for the sprite, easier way to obtain feedback
Does a sprite have to be 100% spritework?
Wym? Like 100% custom or 100% pixel art?
Sprites don’t have to be 100% made from scratch, you can use other sprites as a base and change features from there
several sprites are just, take some parts of sprite X, place them on sprite Y and fix the coloring
No. So I was discussing with gladios and he's working on a palkia fusion. I suggested layering in actual star systems into certain areas and he said that doesn't work
Like a living universe
As long as it’s pixel art and it fits the style
I mean like this
You can’t just put a PNG on it
If you remade it into a pixel art style it would be fine but you can’t just copy paste an image from google
Kinda sucks. I get why but it would have looked great
Example
Yeah you get the idea of a solar system but it’s not an image from google
It looks worse than you’d think lmao
That image you shared is giant and detailed, if you shrunk it down, or even just took a tiny 96x96 sampling it would look awful xD
i tried it just out of curiousity and yeah it was not good
6
#1046755718767837184 Any more feedback?
Does the pixelart people post actually get used in the game
Yes
Cool
i think its great, if u wanted to put more into it tho, i think id be cool to make its thorax longer like salamences tail or show a semblence of his limbs, and mix the head up between volc and salamence a little, but its great as is
i hope that doesnt sound disrespectful 
I think the design couldve been cooler
feedback in the thread please xD
oh sorry
And no it isn't disrespectful
i didnt know there was a thread
Should i post this? #1046749970709106698
Any more feedback for #1046497669838819429
Can I get some feedback for #1046853962046898286
Is Krita good for spritemaking and what dimensions should I start off with when I begin making sprites
No
Here are some program suggestions
#spriting-guidelines message
I used to use Krita, but Paint.net imo is better for a free option
Aseprite still top
aseprite so good
It was a little weird to get used to but when you do it feels amazing
Literally one of my favorite drawing apps now
I've finaly cound a candidate for the Porygon Z/ Rattat sprite
You can shrink things down if you try hard enough, I sprited the Mona Lisa. 😂
How's this looking? I feel like it needs something more, but I can't tell what. 😅 #1046873466965598309
Yeah but you drew on-top of that xD it still requires pixel art and I'll argue that just doing spritework for stars is a lot easier than shrinking down a photo and drawing on-top xDD
Also very good smeargle gengar xD
Not sure if I ask this here or not how would I put in custom sprites for my game, version 5
Hey @kindred vessel! Are you trying to add more custom sprites to your game? You can find the most up to date sprite pack containing all custom sprites in #downloads! To add them to your game, simply copy all the files into your game's CustomBattlers folder. The pack also contains alts and things such as joke sprites and regional variants, which you can also add to your game if you wish.
You can swap between alts of a given fusion in-game, using the Pokédex!
Last call for #1046434169057726464
you make 3 sprites, posting them for feedback and everything, same process you see all of us doin, and then you send them to a sprite manager (just DM it and they'll get back to you)
and then you'll get the spriter role and can put them in #sprite-gallery
It’s explained in #spriting-guidelines
Could I get some feedback on this? #1046884591283208364
Anymore feedback on #1046551381487661056 and #1046613022841512006 or are they good to go?
Just a quick question: What are the advantages of using aesprite. I’ve been using piskel so far, so I’m just interested to know the differences between them.
I've never used piskel so i don't know about a comparison, but i've been using aseprite for awhile and some of the features i really like are layers, you can set a grid at any size you want, i find it works really well for resizing and rotating pieces (it still gets deformed but it's not as messy)
By rotation, you mean that a selected area can be rotated at any angle? (As opposed to being restricted to flipping and 90-degree rotations)
I use a free program called Krita, it takes a bit of setup to get it ready for pixel art, but I quite like it, it does get a bit messy when you rotate to a non 90 degree angle, but its pretty fixable
Any thoughts on Slaking X Rampardos so far?
#1045961594183626822 mb forgot to tag
correct. Aseprite has a few different rotation algorithms for how it does it at odd angles and which pixel it uses (blending colors vs picking specific pixels or whatever), and you can also set a pivot point
The layers are super useful, its animation tools are fantastic, its just really well optimized for working at a single pixel scale
That actually sounds pretty neat! There have definitely been times when I wanted to rotate a certain area at a non-90-degree angle, but alas, piskel
Might try experimenting with aesprite during the next school break 👍
Also just realized that I’ve been spelling it wrong this whole time haha 😅
it's got a weird name xD i always mispell it
any advice should i make it in motion back movement or front movement or non at all... #1044004040100548680
It's BBQ time! Any thoughts/suggestions? #1046573939259871273
Putting it up to vote, what do we think of the final version of Lugimence, and is there any feedback necessary or are they ready to go? #1046969959978385598
Its mostly done, i just cant quite get the right claws, well, right, any help would be appreciated 
#1045938660182347788
anyone knows how to do curves
What do you guys think about my Cofagrigus(Head)/Charmeleon(body) fusion?
Make a post in #spriting-discussion
the easiest solution is to use the circle tool to make an outline 👍
i'm using Photoshop what tool would that be
pretty sure it would be somewhere in the shapes category
for the sprite gallery, are you allowed to post retouched versions of older gen sprites (ofc with proper credit and following the guidelines)? (ex. a recolored version of the official gen 3 sprite of bulbasaur)
This fella ready? #1046970230699741205 👁️ 🟢 👁️
this cool to post or no #1047076773730471947
Which one? SV spoilers, so be careful. 😄 #1046873466965598309
last call suggestions bef i post this? #1046324707340865596
im looking for more feedback on my little nidoranm riolu fusion, the link is to the thread. what can i do better? (go easy on me, its my first sprite)
im almost there but i need some asistance #1047186021693005926
you need to go to #fusions for that,
i was told to come here
ah
Hydreigon/Hydreigon, Garchomp/Nidoking?, Nidoking/Talonflame
yep, thats what they are based on the file names
i used this and didnt get the same result
the hydreigon is correct
some fusions have alts
yea those are alts
Aegide doesn't always reflect what the game uses either
then in game, i would get these alts instead of the one shown by aegide?
it depends on what sprite is in your custom battlers folder
#1047144008595542060 ready to post ?
How do you submit something to the sprite gallery
you need the spriters roll
to get the spriters roll you will need to have three sprites
Ok il make some more sprites
and send them to a member with the sprite manager roll
Ok
You need to always run them through #spriting-discussion first
you can't just post them
You need at least some criticism prior to posting
I got some sprites on there il just work on them more
Does someone wanne give some criticism
post them separately in #spriting-discussion and create a thread
I Already did
do you have the thread link?
how do I find the sprite number for fusions that don't have a sprite ready?
Put em in the calculator and grab the number
^
That's what I do
thx
or use the Dex command
Where can I find a Sprite manager?
look at the first couple of people that are in the server
I know Milchik#6233 is a sprite manager so you might wanna dm 'em your three sprites
or someone else
I browsed through the #staff-presentations to find them because I was too afraid to ask lol
ah, I forgot that was a thing
#1046755718767837184 Any last feedback?
No, this is better in #fusions. 🙂
Can someone look over my #1041913855196012546 one last time?
Show a picture of it too
Here you go #1041913855196012546
#1043197141176291378 ayo guys, i know its only a small color change but which do you guys prefer?
#1047014056617320501 fixes pls :>
Sorry folks I got quite a few I think are ready to go, lmk if they can go 🙂 #1046536273172631604 #1046724978206326844 #1046967980262686750 #1047082261381660692
#1044784532085284864 any feedback for this one?
Is this ready? SV spoilers, so be careful. 🙂 #1047242352332378214
Same fusion, which back plate design? 😄 #1047242352332378214
Choose #1047229771198775346
Howzit? #1047280888075010099
cute
how do i use this
What do you mean?
how would i get the individual parts? do i just zoom in and screenshot?
Just open in your application and copy paste the parts you need
presumably magic wand or the like rather than screenshot
okay, ty
@lethal timber Yes, these exist for other generations. 🙂
Specifically ones with official sprites, so I-V. 😄
fixes last call prob #1047014056617320501
Is there like any custom sprite poses bases folder for basic Pokémon, free use?
Check the sprite pack, make sure to search #sprite-gallery to find out who made it so you can credit them
Recently updated Jolteon/Crobat with no front wings, looks better? #1046587360957169804
do you think it could be good? #1047277973121806406
Any suggests? #1046192698861826108
Any feedback Or good to go? #1047270705873551421
@blazing crypt You have to post to #spriting-discussion
????
Any more tweaking that needs to be done, or is this one ready to go? #1046573939259871273
If I have a WIP sprite and I want to ask questions, should I post here or make a thread in #spriting-discussion , even if its mostly incomplete?
A very incomplete Kyogre/Zekrom, #1047317522241835090
HGSS Colors <> B&W Colors #1047229771198775346
Also you should use a darker outline color for the tan parts
which design do you perfer?
You need to read the parts in #spriting-guidelines about outlines and shading
Specifically about making things look round
Man who made this??
Anything else I should do before I post? #1047271387829633044
NOOOOOOOO
Updated my Kyogre/Zekrom #1047317522241835090
@hot shoal please don't chat in #spriting-discussion, you can use threads under each spritework post to leave your feedback 
Anything missing? #1046192698861826108
Which version of the right claws is better?
Hey folks can I get some feed back on? #1047365665734008842
Think im gonna stick with the updated claws, feels less blurry, anything else before post repost? #1045938660182347788
any final feedback for #1046497669838819429 ?
are these ready? what is your guys thoughts, any more input? #1044004040100548680 ||sorry repost thought it be easier to puts them like this instead of grid.||
#1047386035023261787 Warmer joke alt. Is it ready to be submitted yet?
Feed back for this guy? #1047391812538613861
@broken spade I can't post my sprites to the gallery and spoiler them since it changes the file name
I'm not sure what I can do here
Does anyone have any cool custom Sprites to change in game trainers/gym leaders i could use thanks!
How does one export their sprite in a 288 x 288 image?
Mine just becomes like this... really small
What software do you use?
Paint tool Sai
It's bad for resizing afaik
At least the version I use will make the pic blurry either way
What software do you guys use?
You can resize your pics in MC Paint
But you can check #spriting-guidelines for more pixel art focused softwares
Oh I use photoshop
But I sprite with Sai because of the binary brush
Photoshop has binary brush too
Maybe I can resize with Flash since it's vector based...
If you're comfortable with photoshop, I can DM you how to find a binary brush and eraser and how to resize your sprites
#1047144008595542060 anything to add ?
#1046755718767837184 anything left?
#1047488722586845215 (semi SV spoiler) ||Maushold-like||
Is it good?
Think it looks decent? Criticism needed! #1047476756443041852
Which looks better?
ready? #1046456705933922426
These ready to go? #1046497669838819429
Aright its looking a bit better but it might still need work. #1047186021693005926
ready? #1047512732045422803
Also still looking for feed back for this guy #1047391812538613861
https://discord.com/channels/302153478556352513/1047461915477151794
I feel like this needs more sunflora but I'm not sure where to add it?
What do yall think?
make sure to post the image in this chat and use the # instead of the link
@dusty sorrel you just spoiled a new mon to looots of people here
I deleted the post for now, please re-post the sprite and hide it behind a spoiler
The game isn't even a month old and some people are still getting their games, this is why everyone uses spoilers to hide their ScVi related sprites
I see them hidden
In the gallery
this is #is-my-sprite-ready, I was talking about #sprite-gallery, it wasn't hidden there
ok, sorry...i thought i hid everything
no worries, just repost the sprite and hide it
done...good now? even if the bot gives me an error?
Looks like you named the file differently to spoiler it
so is it actually right?
You should be able to spoiler images without having to change their file name
Discord automatically renamed files for some reason to have spoiler in front of the name
Oh what
|
#1047461915477151794
Does this look done or does it need more? 
Made this on request but have heard nothing from the person requesting it. So not letting it go to waste. Any thoughts? Ive made a few alts in #1046125604900175952 if theres any preferences else. Shall I just upload this one?
This lil guy seem good to go, or needs more work? #1047522370803470397
Ready to go or is there more i can do?
How do you guys size up the sprite?
varies based on program
I use pixilart. Theres a setting during the export process that lets you size it up
most programs have an image size or sprite size option. 300% larger.
There’s a website that can also do it for you
in gimp it's just image/scaleimage and then set it to have no cubic interpolation with the resolution you want
Also why did i post my sprite like i can put it into the gallery. Its my first and i dont have privileges yey
Is it good to go or does it need more work?
#1046749522098913330
necessary process for all sprites, you can later take 3 of those and dm them to a manager for the role
i know lol, im just questioning my own stupidity
Doing from phone
Getting out of school rn
And gotta drive in a bit
Someone voted bothe for posting and keep working, should i wait more votes?
a lot of people post to spritework without the spriter tag, it's a pretty good place for advice even if you don't plan on having your stuff go into the game
that was the bot adding the reactions to the post, i guess so people know that those reactions are there or something?
#1047286926996156486
advice
random question, is it allowed to ask spriters for help/commissions in this server?
#spriting-discussion is where you post a sprite for feedback
Y'all think this is ready? #1047186021693005926
May I get some feedback on the updated #1047365665734008842 ?
Howzit? #1047280888075010099
Any feedback on #1047321098091516005 and #1047265209452085348 ? Probably going to take a break from the Woopers for a few fusions after these guys, got more ideas, but need a different colour palette
Can it be better or is this fine? #1046749522098913330
Are these ready? #1046497669838819429 and #1047391812538613861
Is there a doc octopus fusion of Ferro?
maybe you should check with the "showsprite" command in #ask-a-bot
No
?tag calc
Here's Aegide's fusion calculator, which will help you see the type, stats and sprite of any given fusion in IF https://aegide.github.io/
Use this
You need 3 sprites to apply for spriter correct?
Good to go? #1047270705873551421
yes
double check #spriting-guidelines for more information :)
@cyan sierra @plucky egret don’t talk in #spriting-discussion
🫡.
Spriters, what is your preferred program? I'm considering getting into it but don't want to shell out for photoshop
i use aseprite
#spriting-guidelines has some programs listed
Paint.net is the one I use, and it works fine
i use krita. The only app I don't suggest is ibis paint x. When you save pixel art it comes blurry and resizing is bad
I'm a gimp user, which is like, super unfriendly to beginners, but insanely versatile if you understand it
oh
i used the funny word
what do you guys think? Is it done yet? SV spoiler #1047322126471938111
gimp users unite 
reposting this with updated sprites, Who prefers the Orange feet or the Black feet? (Deciding on which for the entire Charizard-line/Houndoom-line main sprite would have, the looser would be the Alt. )
if you want to go to the thread here it is #1044004040100548680.
marowak slaking #1047520072555560970
Is it good to go or does it need more work #1047673778236309575
Uhhh i just submitted but it looks like Fusion bot is wrong or Im wrong I submitted a Yanma Luxray but the image was Yanma Aron in fusion bot
Yeah, that means you got the numbers wrong
?tag calc
Here's Aegide's fusion calculator, which will help you see the type, stats and sprite of any given fusion in IF https://aegide.github.io/
Find the correct numbers here
Oh its not sequential oops
#1047754932062789682 hows it lookin?
It's looking like Lugia
i had the orange parts in the wings in hopes it would look less like lugia 😂
maybe talons would help
A little goofy but tbh swampert is slightly goofy
roserade and milotic?
That would mean they want you to link your sprite's thread
No problem. You can link it here much like how you link a channel, by typing #threadname
Very good, you got it
So is this good to go #1047673778236309575
corrected some mistakes and changed body colors to original palkia pallette, is now #1046749522098913330 ready to go?
we posted at the same time lol
Guys, If the bot says my sprite is accepted, does it mean it will be in the game?
it means you didnt make a numbering mistake
Oh, ok
but if people didnt spot any sprite mistakes and you posted it in the gallery odds are it'll be in the sprite pack
So, if I had received feedback and applied it, it should
...why is this in spritework questions?
ah, ok
#1047583678991175710 Good to post?
Green or Purple?
Green gives it more roserade vibes, purple gives it more mismagius vibes, that are already heavily present. I say green
Both
Maybe the green one can be an Alt?
do you have a thread?
I'll just post the Purple one and post the green one on the thread
but this discussion makes more sense in a thread
agreed
also you need a thread to post the sprite regardless
one of the rules (i think it was nine? I don't know)
👍
i need that juicy juicy feedback on this one #1047878516194164877
DANG
How'd a Cyndaquil do this?
If say roserade and infernape or vigoroth
Nope
roserade darmanitan
Nope
Mamoswine
YEAH \o/

Ran out of ideas at #1046192698861826108
#1047892490872692838
https://cdn.discordapp.com/attachments/307020509856530434/1047892490910445578/143.623.png
Any major flaws before I call this done?
The head doesn’t blend all that well with the body. Maybe if it was moved up a bit, or perhaps if the teeth lookin things were removed
Also, there might’ve been a slight mistake with the right eye, is that L thing there intentionally?
(Aside from that it looks amazing btw)
It's meant to be a nod to Golurk's asymmetrical eyes.
Ohhh that makes sense
Although, as a suggestion. Maybe you could try making the right eye a little bit longer horizontally by a pixel or two?
Make sure you're commenting into the thread
Does anyone think it's ready or needs something?
It seems a tad blurry. I think it needs a tad bit more definition but aside from that it looks ready
#1047864166582591560 , this fella seem good to go or need more work?
What do y’all be making your sprites in? (Asking for any iPad Pro users, if there are any)
I do mine in Gimp
Paint Tool Sai
And resizing it in Adobe Flash
fair warning, gimp is super versatile but super unfriendly to beginners
Hm, well I’ll give it a shot
If you want to use PTS
Use the Binary brush for Pixel art
Ooo, alright
@sleek skiff I was told to submit my sprites to Sprite Managers if they are able to be in the game
So do I just DM you the sprites?
PhotoShop? Or something else
Paint tool Sai
how do y'all like these Festive Starters for the Christmas season. #1047875987389554810
How'd I do for my first day of spriting? XD
You're a natural
If this was your first time, im excited to see what you'll be capable of in a couple months
Not really, more like I'm returning after a long hiatus of spriting
Haven't made Pokemon Fusions after graduating Grade school
That makes a bit more sense
ready ? #1047512732045422803
Any ideas on what pokemon I could mix Delibird with to make a Poke-Krampus?
Stantler
grimsnarl but aint in this
Hypno
Nidoking
darkai?
joe
Giratina