In WIn

[ornate parcel]

Which case is that?

Specifically

[frozen gulch]

EK InWin 303 collab… I would not recommend it I ran into a lot of issues but it’s flowing now

[ornate parcel]

oh

[frozen gulch]

Actually it’s fine if you don’t need a bottom radiator… that was 100% of the issues

[modern hearth]

Nice nice

[novel fox]

Specs?

[narrow jetty]

Are those top fans sitting against glass?

[frozen gulch]

10850k / 3080ti / 32 GB ram / 1TB Samsung m.2 / 16TB HeHDDs / XFX platinum 1000w PSU

[frozen gulch]

If you look at the front picture, they have about 1/8” clearance from those top holes… so no, they have over a full inch clearance from the glass

[novel fox]

Damm, nice specs and a cool loop

[frozen gulch]

Thank you 😊

[novel fox]

One more question, how hard is it to do a custom loop?

[narrow jetty]

Pretty sure that was a prebuilt custom loop. He said it was an ek inwin 303 which seems to be a kit which makes it more and more like legos

[frozen gulch]

Lol… na… The case comes with a distro plate but that’s it… had to plan the loop, order fittings, reorder more fittings cause the first set didn’t have enough, and bend/cut the hard tube from stock… took about two weeks, there was no kit about it 🙃

As for how hard it is? Once you get over the fear of bending tube wrong it’s not that bad… I would suggest ordering whatever case/mobo/GPU/res/radiators first and plan the loop using coat hangers as mock tubes… from there you can see exactly what fittings you need… make sure you take into account a way to fill/drain it

[narrow jetty]

Was it $400 still? Thats kinda a scam for $400

Id have expected atleast fittings and tubing to come with it

[frozen gulch]

There’s a very large integrated distro plate… I mean that alone is ~$200 🤷‍♂️