#Just finished my pc. This is my first pc
1 messages · Page 1 of 1 (latest)
Yes. Other wise it would block the ram
You mean the rgb on the ram?
That too
If you don't care about the rgb, then you can just move the fan slightly up
Those clips are designed to allow a little wiggle room
The fan works perfectly fine.
That's not the problem
I don't see a point
Then what is?
Right now your CPU cooler fans are sucking up hot air exhausted from your GPU
They aren't drawing in fresh air from the front of your case
It isn't. The gpu coolers are looking down. Aswell I checked bios and its 27C⁰

The fans on the GPU suck air in, they don't blow it out
You won't notice a difference until the GPU is underload
yeah theres nothing necessarily wrong with it but ideally youd flip it around
id recommend it flipped
just move the fan clip up a bit to make room for ram
Or move one of the fans on the back to have pull + pull
Worse than push + pull, but small difference and you still get to see your rgb ram
Aight
it isnt
it is in fact sucking the backplate
and getting 0 air
?
it will give you a better understanding of how internal exhaust coolers work on a gpu
this is also true, to an extent, but any/most of the air passing through that heatsink will be preheated air from the GPU (when its underload)
yea
the little bit of air it does manage to get
also exhaust
any negative pressure in that little gap will just be filled with hot air
just do this
It still doesn't have room. That's where the usbs of the motherboard are
Why don't I just flip it upside down
Just move the fan up?
not good for cooling
move fan up