#how do i make my screen smaller?its too big to the point that i cant see the options for the y,x,z
1 messages · Page 1 of 1 (latest)
decrease display percent
ok
i got another question @earnest garden
im hunting arcues
and i redid the eye snip
don’t use snipping tool
use the raw screenshot button and crop it down
also you might have issues monitoring on the platform
if you can’t find a seed then monitor in the cave instead
oh cuz i was watching papa jefe and he was doing it on the platform
should i do it in the cave instead?
if you can’t find a seed on the platform yes
if you’re confident the blinks are being tracked properly then just 1
ok
cuz this time im using a hdmi capture card
last time i was using my iphone and it wasnt getting the blinks
spent 5 hours
@earnest garden does the hdmi capture card make a huge difference?
it means you have a cleaner feed of the screen
i see
so if that’s where your issues were then yes
ok
@earnest garden also how do i get a clean screenshot of the eye?
the blue box keeps lagging everywhere so i cant take a screenshot
move the box off of the eye
oh
right
i cant crop in photos what
nvm
@earnest garden i failed to deduce blinks
it looked extremely accurate
should i recrop my eye?
or move into the cave
cave
looks fine
so set threshold to 0.75?
@earnest garden my game suddenly froze
i did remonitor again
is that normal lol
bruh it keeps freezing?
the game is freezing or the program is freezing
don’t click reidentify if that’s what you’re doing
gonna do try #2 now
@earnest garden i got the seed
what should the delay be for arceus?
and where do i reidentity?
@earnest garden yo i got to the timeline place
and the advances stopped
and suddenly skipped a bunch of advances after the cutscene
the advances briefly stop when the timeline starts yes
that’s because you’re suppose to be leaving the cave when it starts
and when it fades to black there aren’t any advances
you wouldn’t reidentify after leaving the cave
you would just get through the cutscene while the timeline goes on
and press A on your target
wait i leave the cave at the start timeline advance?
or when i play the azure flute and get to the test box
start the timeline in the cave on the start timeline advance
it will do a countdown from 10
when it hits 0 you leave the cave
use azure flute if you have to
get through the whole arceus cutscene
ok
then wait until you get to the final A press advance
no wonder
and trigger the encounter there
84 is fine
ok
you’re not going to get it first try so you have to catch what you get
and find what advance you hit
from there you can adjust the delay
i pressed timeline at the azure flute
no wonder i got like
it was supposed to be at 4429
but i got 4580
cuz i pressed timeline at the azure flute
@earnest garden so press the timeline in the cave kk
and exit when at 0
yes
if you do not have enough time to get through the entire arceus cutscene you would want to increase the timeline buffer
by however many extra seconds you need
you don’t want to give yourself too much extra time though because that will make what you ultimately hit more inconsistent
oh i see
it wasnt that far off
it was at 4429
and i got it at 4580
so ill do it again and see
@earnest garden i saw on the sheet the timeline buffer should be 220
i guess im going to do 220
@earnest garden what was ur final a press delay for arceus
cuz like did you do it in the cave?
also does it matter that its in a cave
that won’t affect the final A press delay
ok
all being in the cave changes is that you might need a higher buffer
and you’re just going to have to calibrate
if you hit 49 later than what you aimed for
ok
then yes 133
kk
@earnest garden does accidentally clicking on monitor blinks reset the seed?
i clicked it once and immediately clicked out
also does exiting the game change the seed
if you already had a seed found yes that will mess it up
you can reidentify though
and yes every time you open the game it starts at a random seed
@earnest garden so if i dont click out of the game but click monitor blinks on accident
i can just reidentify to get the advances back right?
yes
as long as you still have your seeds in the S[0-3] box
havent gotten this far since 1 hour ago
i succeeded in getting to arcues but he wasnt shiny @earnest garden
check what advance you got
k
lemme catch him
it was at 8073
the one i was going to catch was at 8058
@earnest garden
so what do i change?
i did pause a bit on the stairway cuz the timeline buffer was way too much but same time was close
you would increase the A press delay by 15
but thats a lot to be off by
so i would try with a closer timeline buffer first
hmmm
so what number should my timeline buffer be?
like decrease the number?
by how much?
no
oh what
timeline buffer is how may advances before your target that you start the timeline
oh
you dont adjust it based on what you hit
i see
you adjust it based on how much time you need to get through the cutscene
you adjust the A press delay based on what you hit
i see
which is why if you hit 15 late you would increase it by 15
so i just change my A delay?
if you had extra time to get through the cutscene you decrease the timeline buffer
cuz i did pause on the stairway for like 5 seconds
ok
decrease by 10 increments?
a timeline buffer thats too high will make things a lot more inconsistent
yeah
so you want to get that nailed down before calibrating your A press delay
imma do one more and head off to sleep
@earnest garden can i change the timeline buffer AND the a press delay at the same time?
or calibrate timeline buffer firs
you can
ok
so i increase 133 to 148 by 15
and i changed timeline buffer from 220 to 210
@earnest garden wait i just noticed theres a tid and sid in pokefinder
do i need to input mine into there for it to work
no
ok
@earnest garden turns out 210 is too slow
i guess 220 was the play
its just i needed to change my a press delay
cuz my target was at 10109
but couldnt make it
@earnest garden thanks for the help bro
im going to sleep
i think a few more runs and ill get the time line buffer calibrated