Output maximum too high

[spiral ledge]

I was trying to do eye physics and the output maximum keeps updating itself to random numbers that are way too high I didnt have this issue with a chibi model that I rigged, am I doing something wrong?

[vague fog]

You just need to hit the "decrease output" button next to the maximum output and it'll auto adjust for you! It also might help to reduce the shaking a little bit in the pendulum

[spiral ledge]

that does work

but the output maximum for this is higher than another model i worked on, is there a reason for that?

this is the other model, scale is at 3 and output max is 80-85

but this model, scale is at 1 and the output max goes to 140-150 (it keeps updating to go higher than the picture shown)

[spiral ledge]

i changed the pendulum settings to be the same and the highest it goes for this one is 120-140

did i do something wrong

why is the scale different for both models?

[vague fog]

I mean physics react to the rigging so if the rigging is different, so will the physics outputs. You'll usually have to mess with presets a bit per rig~