Hey there! I recently aquired a new nintendo 3ds ll that had a bad left stick, i disassambled the console, restored the missing stick but now it just wont turn on anymore. It does charge, i feel the battery warming up, but i cant get the console to boot at all. Any tips?
#New 3DS LL Charging, but wont turn on?
166 messages · Page 1 of 1 (latest)
oh, also no popping when i try to turn it on. already reseated the screen cables, but theres no difference
@tropic scaffoldmake a pic of the mainboard and cables
Ill take another one when im back home, still at work
I reseated all of the cables yesterday, no success so far
ok now it will sound stupid but unplug the analog stick cable
if your 3ds is modded dont put the sd card in. it boots fast in a bootchain loader
why would the analog stick cable do anything
you never know
@tropic scaffold which ribbon you reseated? maybe you miss placed the screen ribbon cable on the back
I didnt do much honestly, i powered it on and it just worked
I still need to figure out, how i need to "fold" the cable correctly, so that the mobo can fit
mobo?
motherboard* xD
Now im getting a slight blue light, and it turns of immediately
inserted the sd card --> popping sound
Imma check the ribbons again
Sigj
ow then maybe clean the sd card ribbon slot and reseat it
I think the issue is the ribbon cables, some of the cables can click into place even when misaligned
aye
So they click in but won't work
aight, still a popping sound, bottom screen is flashing
i guess time to reseat it all aganeeee
Red one pins must head down
Blue pins must be up side
I miss placed the red one once sooo yea
got it, ye
reinstalled the cables again
no pop, but just a flashing light and it turns off
Still something wrong with top or bottom LCD cables
i guess imma buy a replacement cable thenß
are there replacement ribbon cables for both of em?
Yes
thank fk
imma just do a whole reshell and replace it
thanks alot for the help lads! 
my guess is the top screen, since the bottom one is flashing when turning on
Wait didn’t you said before when you don’t insert the sad card reader then it works?
nono, it started to boot after inserting the sd card
but, thats just a luma thing
Ah kk
i got it to boot earlier with the bottom screen working
but even after i reseated the cable, wont boot
Check if the slot is fully down
Cause sometimes the top part is to far up for conection
It counts for every ribbon that have this mechanic secure
I agree, sounds like the bottom screens backlight is turning on (as it should) right before the boot check fails, which turns off the 3ds
I know I know it’s probably the screen ribbon cable I just wanted to say
Well on my new 3ds it looked worser but still works but you could have bad luck
And right now I see it
When doing the ribbon cables open the 3ds
Gives a bit more cable length
Ohhhh.
😅
Im cooked
Yep probably
But also relieved, since its only the cable
Is this the bottom half of the console?
I think that ribbon cable is the top LCD data
Oh?
Back side ribbon is for the lcd (folded one)
If it is then it would be part of the issue (why you were able to turn on the 3ds with the top screen not working) but it wouldn't explain why it's not turning on now
Yeah but which one
There is only one folded ^^
I mean which LCD ribbon cable is the folded one
That's what I'm trying to figure out
*VIDEO ANTIGO TRAZIDO PARA O CANAL PRINCIPAL
I hope this video helps you!
So folded is the screen one that on bottom motherboard the upper laying cable
I mean what is the function of the LCD cable? I think it's the data cable but I'm not sure
You sure that wasn't just the right way?
Do you mean black screen but the console stayed on?
Yessir
Shes putting it in like that
And before i fixed it, i had the contacts showing up
and thats how i fucked up, i suppose
Cable got a bit bent, seems like i bricked the cable doing that
See what i mean?
The longer cable should be bent with both cables facing towards the motherboard
exactly
Uhm that’s the wrong bent you foldet it wrongly
If you've put them in correctly then I would say replace the top LCD, the cables are likely damaged
i know, just for reference how bad the cable lookw
thats what it looked like before fixing kt
Kk
Can you unplug it and make the cable straight and make a pic maybe you can see a damaged tray
I can do that! Sure
If its on a good spot you can solder a thin cable before the broken tray and after the broken part
But easier way is a replacement screen
That long cable is the data one, meaning it's not actually the reason the 3ds isn't turning on. But it is the reason the top screen was black when it did turn on. That means that cable isn't the only one with a problem
oooh boi
Okay, after looking for a bit i can tell you that the cause for the 3ds not turning on is either that ribbon cable next to the data one we were just talking about
The motherboard connector (wide one next to abxy)
Power board connector
Or bottom LCD backlight
Lemme disassemble the console again
and imma take a pic of the LCD connectors on the back of the mobo
Hold on tight
Sure
I'd guess that the issue is the cable next to the one we were talking about
I think red is causing the 3ds to not turn on and yellow is causing the top screen to not work when it did turn on
Better?
You should not be able to see the robin cable pins when the lock is closed
Left side is slightly more out
Sure good luck
works now?
nice ^^ good job now back to a happy live
i had same issues 2 days ago when i motherboard swaped 2 new 3ds xls cause i wanted ips pannels so badly
I feel ya, my top screen is ips
Finally, I'm proud
well it shorted again this time probably when he opened the 3ds fully cause the data cable was not fully in but now it works
Thanks alot again, friends!