GBA TP9 help

[plush pollen]

Hey I totally fucked up the solder connection on tp9 for the left trigger on a laminated screen. Can i solder the wire anywhere else?

[onyx glen]

Please remember to provide as much information as possible including all troubleshooting steps you have already taken. If this is a hardware issue, please provide clear in-focus images of the issue, PCB (circuit board), installation, and any soldering you have done. Help us help you, posts with insufficient information will be deleted

Because this post has the "Game Boy Advance" tag, we recommend checking out this wiki page https://gbwiki.org/en/consoles/advance

Once your issue has been resolved, please click the "Solved" button

[solid sand]

from one of the guides I found, TP points and their directly related inputs are color-coded with each other.

you should be able to use the one just below the shoulder button, directly up from the up pad. look for the little light green dot

[plush pollen]

So the one to the left of CSCP will do?

[solid sand]

that should be the one. do note that that is where the pin from the should button trigger is soldered. try not to damage that one as well.

you got this.

[plush pollen]

Oh my god THANK YOU

[solid sand]

I think this picture is from the server guide. if you really need a quick reference, check it out. it has soe useful bits in it

solder it on, and test it. if it works, you're good to go.

[plush pollen]

Lol well I WAS able to make a successful connection to the left bumper but my select button wouldn't trigger the osd. SO I re-soldered the points on the ribbon cable and on the select button. BUT IT STILL WOULDN'T WORK. so i tried the start button and that STILL WOULDN'T WORK.

I yeild to technology. It won this round.

I appreciate your help but unfortunately I overestimated my ability for this project.