#pokémon emerald stuck on white screen after battery change

1 messages · Page 1 of 1 (latest)

deft cosmos
#

hello! after successfully replacing the batteries in my ruby and sapphire carts, i don't know what went wrong with my emerald cart. after doing some research, it sounds like this problem has something to do with the ram, but i've checked it, cleaned it with isopropyl alcohol idk how many times, and brushed between pins with a soft toothbrush. does anything look wrong with it?
original sized photos here: https://imgur.com/a/nEOr0Ck

oblique cypressBOT
# deft cosmos hello! after successfully replacing the batteries in my ruby and sapphire carts,...

Please remember to provide as much information as possible including all troubleshooting steps you have already taken. If this is a hardware issue, please provide clear in-focus images of the issue, PCB (circuit board), installation, and any soldering you have done. Help us help you, posts with insufficient information will be deleted

Because this post has the "Game Cartridge" tag, we recommend checking out this wiki page https://gbwiki.org/en/other/commonissues#game-cartridge-problems

deft cosmos
sharp maple
#

Heyo @deft cosmos 👋
I feel like you are using portrait mode for your photos, as the focus is very short, rendering most of the depth blurry

deft cosmos
#

hi, sorry! i tried taking them focusing on different angles but the blur made things weird. hopefully these are better

sharp maple
#

Thanks
Did you confirm that the cart was functional before the battery swap ?

deft cosmos
#

yes, it was working before

#

this has been mine since childhood and i haven't done anything with it until a few days ago

sharp maple
#

Can you take a picture of that area ?
Zooming in preferably 🤗

deft cosmos
sharp maple
#

That's oxidized
How did you remove the battery ?

deft cosmos
#

oh no, i soldered it off and used desoldering braid... i don't think i did anything special

#

is there any way it could be saved?

sharp maple
#

I was wondering if you used a hotplate or something that could have oxidized some area with traces of humidity...

The handling and heat probably gave the last hit to the trace

Nothing is lost but I need to know more about your soldering skills and tools

deft cosmos
#

well i'm certainly not advanced, but if the game is messed up and i don't know anyone willing to fix it.... i can probably get the tools to attempt to fix it. also no i don't own a hotplate

#

forgot to mention i applied flux

unborn wind
#

do you have a gbxcart or know someone who does?

sharp maple
#

Where are you based ?

deft cosmos
sharp maple
#

If you would like to fix it yourself, I can give you some guidelines, but I'd be a worried about chances of success if you lack the tools and/or experience

@unborn wind is in Germany and might be willing to fix it for you

I am in France and I can also do it, but with the additional benefit of croissant smell on your cartridge (optional)

deft cosmos
#

will my cartridge be buttery when it comes back to me?

#

i don't mind anything if anyone could fix it. that's much better than me breaking my poor cartridge. whoever fixes it for me.... do you have paypal?

sharp maple
#

I hear butter brings good luck and protection to the pokemons

deft cosmos
#

out of curiosity, what would the guidelines be and tools i would need?

#

i'm so flabbergasted right now, those points aren't even near where i touched lol

sharp maple
#

Training boards
Trace repair training
Gear check (iron solder flux uv mask, visual enhancement, probably either hotplate or hot air... Stuff)

deft cosmos
#

sounds cool and interesting and would like to practice but probably not on my cart

sharp maple
#

That's the issue here, this is an expensive cart

deft cosmos
#

i don't want to sell it, i just want to play my game man🥲

#

but yeah if anyone could help, whoever, i can pay for postage there and back and labor. idk how much is a good amount though

#

should i close this thread and dm or something?

sharp maple
#

I meant the cartridge would be expensive to replace, + sentimental value, so let's not waste this cart

I will give @unborn wind the initiative here as he is in Germany and that would be cheaper

sharp maple
unborn wind
#

Dein Postkasten is geschlossen. Meine Vermutung ist ein korruptes Savegame, aus welchem Grund auch immer. Speicher löschen hat bisher geholfen. Sollte es eine kalte Lötstelle sein, finde ich die auch.

deft cosmos
#

das wäre ok, ich will nur ein funktionierendes cartridge. darf ich dir eine Freundesanfrage schicken?

#

ich gehe jetzt schlafen. wenn du mir helfen könntest, können wir morgen über die details reden :-) gute nacht

sharp maple
#

Before anything, I forgot to ask
Do you own a multimeter ?

deft cosmos
#

no... but i'm pretty sure i know someone who has one

sharp maple
#

If you have the opportunity you can confirm that the oxidation is an issue or not, with a continuity test
Note that if it's not yet, it will be at some point, most likely

deft cosmos
#

that sounds so sad

unborn wind
sharp maple
#

Doing everything in reverse here, but I also forgot to ask if you had a Nintendo logo

deft cosmos
#

yes, nintendo logo shows up

sharp maple
#

Ah, then yeah, a save data issue possible
Did you try the button combo to reset the save ?
I think you need to get to the title screen tho

deft cosmos
#

i unfortunately can't get that far, after the gameboy nintendo logo disappears i just get a white screen

#

the board also seems a bit loose in the cartridge. i tried putting something to hold it in place but that didn't work

#

anyways i'm going to sleep, i can talk more later. good night and thank you for the info 🥐

unborn wind
#

weiterhin viel Spass damit.

valid vault
#

Habe kein touch

deft cosmos