dusty trellis
6 charged manually loaded QF gun (change your config to make cartridges 6 charged), and is controlled using 2 linked controllers, one for the driver one for the gunner. A recommended crew of 3, driver gunner loader, but if you have an extra guy he can act as the commander. There's also enough space in the turret to fit an autoloader if you want to try. It runs off a 16K SU steam engine coupled to a redstone transmission which allows for smooth running.
To start up the tank, assemble it with a eureka helm, and then glue up the turret as well as the inset turret parts, and assemble the turret. Then get inside the engine by crawling into the cast iron hatches on the engine deck, place some fuel in the right hopper, and place water where the pump, and engine block is, as well as the 2 adjacent blocks, be careful to not accidentally spill the water. Once that's done, flick the lever so that the clutch into the "ON" state, and get out. Go into the hull compartment and turn the hand crank, the engine should start. Go back into the engine and flick off the lever, the transmission is now coupled and fuel should pour into the engine to give it full power. Your transmission keys may be incorrectly binded due to schem shit, namely the "W" and "S" keys, flipping them should fix it. Your transmission speed should be 128 RPM, and your gun traverse speeds should be around 5-6 RPM (These speeds are indicated by the two rotational speed controllers). Replace the cannon, assemble it, place a conductor in the gunner's sight area, and take the gunner's linked controller. Make sure the 2energy transmitters in the tank are binded to the same frequency, thats the vertical drive for the gun. Your Leopard is now set, if you have any issues take a screenshot and ping me here. DO NOT SPAWN MORE THAN ONE IN YOUR WORLD WITHOUT CHANGING REDSTONE AND ENERGY TRANSMITTER BINDINGS.
fair verge
fading trench
median jacinth
winter steeple
teal prawn
crimson saffron
