#support-2
1 messages · Page 103 of 1
then why did it work for me with the same purpur version that gave you errors?
at least is fixed. so ill just ask the next person to do the same if i see this again which i believe will happen as it did a few times already
Alright, thanks a lot for the help
i use luckperms with redis and mariadb. for the most part it works great but every so often the server gets stuck on shutdown while closing the connections. is there a way i could fix this? its annoying to have the addental time with load balancing
Try updating to the latest version. Recently, luck added a shutdown delay and error fix that was triggered by applying changes from the editor right before shutdown. Maybe it does the trick for you too
It still gets stuck on closing storage
With the latest version off of the luck perms site
Hmm not sure then
Hello
is there any way to disable /lp editor in one server?
like a "skywars server"
you can have a player interact with a cartel and assign them a group and vice versa?
what is a cartel
sign to add to a group or remove it from it
hello, can anyone know what is a reason of this. MySQL connection is set to max 151 and I am only using around 100. This throws on server shutdown. The install is running with redis for synchronization
ok i drop redis and it works smoothly again
I also have a similar error with redis and mysql
It seems that MariaDB does not close on shutdown sometimes. And other times it works perfectly. I can send logs from all the bungeecord and spigot servers if it would be helpful. I have changed the timeout timmings for now
Hi ^^ It's possible to create Placeholder like this ? %luckperms_numberofplayeringroup_mygroup% ?
I want to count player in placeholder to use it in menu ^^
do this please
No, send it here.
That's not what i asked for 
!Chat LuckPerms is working fine. you need a chat manager
LuckPerms only acts as the source for prefixes / suffixes, it doesn't actually apply them. You need an appropriately configured chat/tablist formatting plugin for them to be displayed. If the values appear correctly when you run /lp user <user> info, LuckPerms is doing its job!
Mhh the servers are on two diffrent versions, might that be it?
look at the link at the bottom.
is there a way i can bring my config file up to date and add new options that have been added in newer versions? or is there a default config somewhere that i can use vimdiff on?
anyone know how to add all permissions from a certain plugin to a group
I tried this
with the .*
I tried:
./lp group builder permission set fawe
./lp group builder permission set fawe.all
./lp group builder permission set fawe.*
the builders are still complaining it didnt give them permission
you could try the permission check command, or even verbose mode to see what is happening
https://luckperms.net/wiki/Permission-Commands#lp-usergroup-usergroup-permission-check-node
👍
any answer for this?
you can always look at the source code. not sure which platform you are using, they all have different configs
here is the default config for bukkit
https://github.com/LuckPerms/LuckPerms/blob/master/bukkit/src/main/resources/config.yml
thanks
do what i told you to do
besides, luckperms chat isnt made or affiliated with luckperms at all despite the name
then it is an issue with your chat plugin
i don't have one
open the config and see if you are even using the placeholder for color
you said u have lpc
make up your mind
lpc doesn't work
but dont say you dont have a chat plugin if clearly you have lpc installed
ask their support if it doesnt work
LPC= LuckPermsChat
we dont make luckpermschat
read at the bottom
ok what can i do with the colors
Ok i make without color only like this "'HeadAdmin''
but the chat like that
<NMAE> <CHAT>
!!1
does the prefix show correctly in /lp user <your user> info?
if it shows correctly in that command, then its not the fault of luckperms
please contact your chat plugin's support
i delete the chat plugin
well then the prefix wont show, however this is not an issue with luckperms
ok can you recommend me chat color plugin??
!chat
LuckPerms only acts as the source for prefixes / suffixes, it doesn't actually apply them. You need an appropriately configured chat/tablist formatting plugin for them to be displayed. If the values appear correctly when you run /lp user <user> info, LuckPerms is doing its job!
second link
Fortunately for us this is fixed in 5.4.15
so in my server ive created all of the groups for my staff but it doesnt show them what commands they have on the server im also not getting tab to show whos and admin or owner
help prefix dont work
one of my servers in my velocity network is giving an error and delaying shutdown: https://pastes.dev/WgVJPwkmYK
how do i fix that? (notice the 1 minute delay from 06:20:40 to 06:21:41)
this delay seems to only happen if i join the server; if i just start the server and shut it down with console (and never join with a player) then it shuts down instantly
ok
is there a specific permission type to completely deny a user group access to LP at all? Like for new visitors and regular builders?
the LP editor has a permission of simply "luckperms" in the list, is that for everything? Theres nothing about that permission on the permissions page.
unless given op on bukkit servers or specifically luckperms.*, nobody should have access to your luckperms. no need to set anything to false
or i just dont get your question xD
the LP editor has a permission of simply "luckperms" in the list
jkust 'luckperms' is not a permission by itself though.
is there a permission i would have to unset to stop the default "noob" group of being able to build or do anything, other than look around?
that sounds like you would need to set either world guard permissions or something like essentials anti build
it really depends if you have a plugin that has permissions for this stuff
I have a worldguard, but dont know how that could be set up so only certain groups can build. Can WG even understand the permissions groups that LP has?
i believe world guard has bypass permissions. so basically you could set the flags for building in __global__ to false in wg, then give certain groups of your choice the bypass permission for this flag
thats just a guess from old memories though
check their docs if a bypass perm for this flag or generally flags exist
tried the docs but really dont understand them at all
I think theres a command for "adding trusted members" but not sure how to understand it as no examples are given.
and if you cant understand the worldguard help wiki, you get banned from their discord server 😂
what xD
I was having trouble finding the information, what i guess was a mod told me to "go read the wiki" which are expansive and extremely complicated for a new person. I tried to explain that i was trying to find out what the "Default" world guard region is, but "default" was a very common thing to search for and returned thousands of results.
Someone else even at one point posted what I think was the answer, but the mod quickly deleted their message and wrote "no need to spoonfeed". I thought I found the answer from a google search, and asked if that was the right thing, because it was an 8 years old result, then suddenly that discord server dissapeared from the left hand list of servers. Guess that means I'm banned?
Guess now i'll have to try find something like WG but much simpler to understand.
Oh darn it wasnt even the right answer anyway XD
i mean i do agree that spoonfeeding is not the solution. but if someone clearly just has trouble regardless of having searched the wiki, why kick or ban
on the other hand i do spoonfeed users i feel like dont even know the simplest things such as that config settings need quotations around them because battling their iq is worse than just slapping them a command
i guess it depends
I agree, but moving on from such things, this leaves me in a predicament, is there anything like WG, but much simpler to understand, or some other way I can protect brand new "default" usergroup from doing anything but looking around?
essentials anti build
it blocks every single darn interaction
so you can hand out use or build perms to groups
can you use that with regions? I have some freinds that would want to play with no monsters in large area. And another bunch that would want to go out and beat up enemies.
i dont think it has flags like monster stuff
it does what the name says. it restricts users from interacting or building with everything
iirc its global
i could be wrong tho. never used it.
i just know when users come here and show us pics of 100 "you dont have permission to..." messages, its likely anti build and deleting it is most often the best solution cuz they install the entire essx package without knowing what it entails
How to add a member to the group? /lp user <user> group add <group> doesnt work and I cant find an option in the editor
did you apply edits from your editor more than once with applyedits
i dont know
thats the only reason i see possible
I just created a group called "builder" in the editor, but then when i do the command in game, it says the group doesnt exist
did you apply the edits of having added the group

Is it possible to set a weight in the editor?
someone help please luckperms doesn´t working
!paste logs/latest.log
Seeing a paste of the problem makes everything so much easier! Use https://pastes.dev/ for easy pasting!
Pastebin any relevant segments of the console log. If it's a startup error, this includes the entire startup log!
Pastebin the entire LuckPerms config file (passwords removed) as well as any other relevant files!
@magic lagoon Let's move here
Are you trying to set a prefix/suffix or?
prefix
And you set a prefix right? Display name and prefix are seperate
Just do /lp group default meta setprefix "&e[MEMBER] &e"
./lp editor and save doesn´t saved
./lp editor doesn´t working
shoudn´t it be by some plugins??
need way more info
im czech and my english is bad
😦
my lp editor instead of save there I have to apply
@mighty yarrow
Hey Red_RedBeast! Please don't tag helpful/staff members directly.
no need to ping him, just provide more informations
please help me 😦
I will give you the approach you can see for yourself
hey its me again so i cant figure out how to instantly give every player deafault group it makes them not apart of any group and it ruins the servers plugins
deges miesto vykrikovania zapni rozum a posli latest.log
!paste
Seeing a paste of the problem makes everything so much easier! Use https://pastes.dev/ for easy pasting!
Pastebin any relevant segments of the console log. If it's a startup error, this includes the entire startup log!
Pastebin the entire LuckPerms config file (passwords removed) as well as any other relevant files!
help
Plugins (10): Backpack*, ChestActions*, LuckPerms, PowerBoard, SetHome-Config, StaffPlus, TPA*, Vault, ViaVersion, xraydetector
What makes you think users dont get added to the default group though? Just curious
Hiya; quick question here
I need to update from 5.2.67 to 5.3.98
Is there anything I should be concerned about in the process/anything that needs to be regenerated etc?
the fact that all of them are saying they dont have the commands that i set
That more so indicates that the permissions are incorrect
Mind sharing one example? Maybe i see a typo that you overlooked
sethome and tpa
You just added 'sethome' and 'tpa'?
Just letting you know that only because the command is sethome or tpa doesnt mean the permission is just that. Usually permissions are <pluginname>.<something similar to the command> such as essentials.tpa, worldedit.brush and so on. Did you actually check the wiki of the plugins you use for a list of their permissions? Also if you dont believe me about the default group, use /lp user <their name> info on a player you believe did not get it. Youll see it show up in their groups
thank you for your support this past two hours and few days i might need you again later but luckperms has officially done its job over and over its perfect for what i need thank you
I’m trying to get rid of a permission, but I don’t know how it’s being set. The user is default group, and neither the user nor group have the permission set or inherited
When I do /lp user name permissions check perm, it says permission check is true though, processor:bukkit.DefaultPermissionMapProcessor, cause:none
Sometimes, plugins or even server software (paper, spigot) add permissions to 'everyone ' outside of luckperms. Do you know where it originates from in your case? Whats the command associated with it?
Just false it
Lp group x permission set y false
That would be the next step ye^
If u don't know where its from
There is a command that scan all your moves and commands
And tell you where each is from
But before doing so disable your anti cheat or your server will crash
Crash big time

verbose?
How about we let him answer my question first and go from there instead of bombing info
Yeeee
Ok, what’s the command? Falsing the group worked, but I still don’t know how they got it
I’m using paper
Sometime its given by default
Again, which command is it?
The command is /back, the permission is huskhomes.back and huskhomes.back.death.
Ah
Yea maybe see in their wiki if this is added by default
Only their docs will know
Back to that i once turned on verbose to find a perm
Vulcan was on
Thousands of
Vulcan.bypass perm was spammed per sec
Server died 💀
Had to kill it for a restart
Do you perhaps have a wildcard set such as huskhomes.*? That would explain how they got it
Ok the plugin is open sourced, I opened the plugin.yml and the permission default is set to true
That’s what’s causing it right?
Thanks for the help guys!

does anyone know if theres a command through lp that disables bed respawns?
Players unable to respawn in their beds
Hey, just wondering how do I allow certain grouops to use certain commands?
!usage
Here's a guide to help users understand and use LuckPerms for the first time.
Hello I have a problem and the "default" group can access all corrections. with which permission do I block all plugins for the default group?
How are we suppose to know what permissions you have on your server
Then look at those plugins documentation and assign the proper permissions
Would i deny this permission, to completely stop anyone of the given group from being able to use luckperms?
no that doesnt work
oh it is lp.* i see
I still need help though, how do you make it so only ONE group type can build in a worldguard region?
I tried adding "/rg addmember spawn_ g:builder" but no one can build.
hahe you tried https://i.imgur.com/YTZz1Vl.png
like i said, instead of adding member (wg doesnt go by groups), deny building and give bypass to those who are allowed to?
only downfall i see here is this bypass also applying to all regions in specified world, including spawn
maybe
idk
yeah i did the build-deny flag
to be honest, if that permission does work then that will solve all my problems
i literally got up a few minutes ago so blame my tired brain if it doesnt lmao
also, lets take this to #general :3
oh wait XD
hi
i need help with luckperms
to be specific
FML has found a non-mod file LuckPerms-Sponge-5.4.15.jar in your mods directory. It will now be injected into your classpath.
Im using spongeforge 1.12.2
no other mods/plugins
sponge loads normally
but luckperms does not
i searched internet
and found that i need same version for sponge and luckperms
as my minecraft (1.12.2)
(who would expected that)
so
i need idk
link
or something
to download 1.12.2 luckperms
or
if you know that its because of something else
please let me know

Any solution?
did you check the server console
It tells you what to do :3
I have tried with Spigot, instead of Bukkit, and it could be solved

Hello there 👋
I've setup my MySQL database but Luckperms cannot connect to it somehow.
I have double and triple checked the LP DB settings: password, user, db name and address but I can't seem to figure out where is the problem.
Here's the error:
java.sql.SQLTransientConnectionException: luckperms-hikari - Connection is not available, request timed out after 5010ms.
I'm a newbie in sysadmin so i might have missed a step on the db setup 🤷♂️
If you need more info to try to solve my problem please ask!
Thanks a lot
Here's the config too:
Are you by chance using the pterodactyl panel?
nope, this is just a small server on my rpi
Maybe remove the password from there ;)
this is not my password lol
where are my glasses
😅
Hm so the database s196_plugins actually does exist, yes?
yes
Fair. Had to ask, sorry if that made you feel like i think youre dumb. Its just sometimes ppl think 'database' is mysql, not database as in 'hey you need to create a ""folder"" to write into'
Tables etc yk
No it's alright ^^
One thing, i've imported this database from an old server so it has already the luckperms tables. Might this be an issue?
Do you have any type of security/connection restriction in place? I managed to block localhost connections with iptables in the past
Dont think so
Youd get an error about corrupt/already existing tables
I never did localhost to be honest. I tried this by pinging my db but from an external ip <.<
Localhost goes brrr
x) I'm gonna check if there's some sort of restriction on Mysql
hm interesting
systemctl start mariadb
oh my it wasnt started indeed 🤦♂️

well there is some errors on startup but i will manage that on my own ^^
thanks ;D
how to remove parent groups with context from users at the same time
also dont forget systemctl enable mariadb
my luckperms doesnt link with the other server in survival and lobby its works but in kitpvp not can someone help me?
Do you have an another chat plugin on the kitpvp server?
ok
"Ok"
@sour gorge
i installed vaukt
vault alone does not format chat
oh nvm
you need a chat plugin + vault on bukkit based srv
what chat plugin you use is up to you
oh ok
?
oh
it was not made by luck
perms
nope
correct https://i.imgur.com/gV7FoFq.png

i can finally setup my lp
If I give myself mod rank in lobby it comes in the kitpvp console only I don't get the rank in kitpvp
someone who know something baout it?
so i assume youre using a remote database to sync those two servers?
!weight
LuckPerms allows you to set weights in order to determine the priority of certain nodes, like permissions and even prefixes. A higher weight number is a higher priority.
yes by adding weight
or the lowest?
higher number = higher group
oh
ok
ty
IT worked
tysm
another question
how can i put all luckperms permission to like luckperms.*
so i won't click eath of them
since they are so many
sorry, what?
ok
yea you can use luckperms.*
oh
you can actually do that with almost any plugin
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
Yes, I tried it there does not help at all, I put both 20 and 15 and 10 minutes, the result is the same, the host has everything by default 8 hours, this is a problem in the plugin
if that were the case then i think we would get hundreds of users here complaining about it all at once
have you checked the ping to your database? maybe you just have a slow connection

I get this error every 5-10 minutes other plugins connected to the same database do not write anything about it and work well
would be good to see your entire latest.log ngl
😦
shouldnt be a problem, or is it?
Or maybe this is due to the fact that my user in the MySQL database does not have root?
no. if the permissions to the database were not sufficient, then how do you explain that it connects on restart just fine
my user has access to reading the database to writing the database and creating structures
mariadb is a fork of mysql just like spigot is a fork of cb
mariadb = mysql basically. few differences but same base
im still waiting for that latest.log file
Please use https://pastes.dev to send files in the future. I have automatically uploaded latest.log for you: https://pastes.dev/B8QZotlQBm
java.sql.SQLTransientConnectionException: luckperms-hikari - Connection is not available, request timed out after 8000ms.
java.sql.SQLTransientConnectionException: luckperms-hikari - Connection is not available, request timed out after 8000ms.
it looks like a timeout caused by your database really.
just also curious why you reloaded the lp config 5 times
I have the maximum-lifetime value
the error itself asks to lower this value
Sorry, the translator translated that sentence incorrectly "I have the maximum-lifetime value"
I have a question for you, when I write/reboot the lp, it definitely changes everything or only partially, I set the settings, but the old settings are in error
Hello! I'm having somekind of a weird issue with LuckPerms lagging out. And lagging out other plugin such as TAB. https://pastes.dev/MEx0gsTW9M Here is a paste. I did /lp info and it said connection between my db and lp is 2ms
so can anyone help me why does my shop doesnt work?
Few weeks ago I found a ton of these differences. Having cross support between mysql8 and mariadb is a nightmare
Dont remind me. I got this coming up one day too lol
Where could I find a list of all of thosr vanilla commands?
Was that just an example or does that permission exist
the command exists, the permission most likely does, it simply adds the command name to minecraft.command. when registering them (the commands)
Zero hits for datapack on the wiki, hence why i was asking
yeah the bukkit wiki is ded
Any up to date ones you have up your sleeve?
the minecraft wiki and add the command name to minecraft.command. 
but then you get into stuff like aliased commands like /xp (which is an alias for /experience) (okay it's the other way around but still) and those use the "real" command permission instead
f u n

samesies
mood
Ya maybe want to see my progress from switching from mariadb syntax to all around SQL syntax?
so is there an easy way to transfer all permissions from a certain group instead of going one by one?
like lets say i want to move all the permissions from "traveler" to "default" group whats the easiest way to do that
honestly it's as easy as a couple of clicks within the web editor, you can select every node with the checkboxes on the left from traveler and copy them to default
help me https://pastes.dev/EWGgXmwjNO
Hi who can help me with putting a plugin so it works without op ? I will rlly apriciate
If the plugin supports permissions, then just give the needed permissions to target user/group ..no op needed :)
Hi guys, i have a similar question. Running LP on bungee and paper. A group has the permission "*" but still cannot do anything on the subservers.... isnt "*" the placeholder for everything anymore? Other sync and stuff works...
Hi, how do I disable the "/team" command for all survival players? (specifically "/team leave")
Hello why im getting this error?
The paste link you sent in is invalid or expired, please check the link or paste a new one.
send a screenshot of /plugins
!bungeecheck may be worth checking this then
Please double check that:
1. BungeeCord config.yml has ip_forward and online_mode set to true
2. All backend servers' spigot.yml has bungeecord set to true
3. All backend servers' server.properties have online-mode set to false
Moved one of my servers to a new domain, I can still connect but 80% of the time it shows up as "Can't connect to server", I don't have it through cloudflare, just through namecheap. Any suggestions for any fixes?
Even when it's listed as "Can't connect to server", I'm still able to join.
[03:11:53 WARN] [LuckPerms]: A permission check was made for player pzvi - e04b6be2-20dc-420a-8f1b-4e029bdc78ec, but LuckPerms does not have any permissions data loaded for them. Perhaps their UUID has been altered since login?
java.lang.Exception: null
help
!bungeecheck
Please double check that:
1. BungeeCord config.yml has ip_forward and online_mode set to true
2. All backend servers' spigot.yml has bungeecord set to true
3. All backend servers' server.properties have online-mode set to false
if you're not using bungeecord I apologize however it does look that way because of that message
i am but now i cant do / server
Hey in certain situations like these the prefix is attached even thought it makes no sense to. This is either Essentials or LP so I thought i'd ask here. What did I do wrong
LP doesn't format your chat so it will be essentials. There is an option in the config "add-prefix-suffix" you may want to consider disabling it.
Just wanted to butt in again, that config option fixed it. Thank you and goodbye.
!offline
Running a Minecraft server in offline mode can cause a lot of issues, particularly with UUIDs and security vulnerabilities. Some people also view it as unethical (piracy). We understand that some people need to run their servers in offline mode. However, due to the reasons mentioned, some users will choose to not support those running a server in offline mode (this does not apply to those running in a Bungeecord network). Please respect their decision, you may continue to seek help for your issue but in most cases, it can be resolved by setting online-mode=true in server.properties.
Offline mode causes a lot of problems with uuids. One of the things is that you have a security plugin on your servers installed. After players login they receive a new uuid and LuckPerms will break
i dont tho
@tidal blade sorry for thr ping could you help though?
if you do not have a plugin altering uuids such as jpremium or nlogin, then one of your bungee, spigot or properties settings is incorrect.
besides that, you will get this anyway at some point if you use offline mode; as soon as a cracked user changes the name they use. your game will see that as a completely different player and treat them like they're new.
im not using cracked players though...
its not configured wrong either because it worked perfectly fine before
its some wierd configuration that minehut does
it worked before when i did local storage
but now that i changed it, it wont work
is your bungee set to online mode true or false?
the network or my backend
the proxy
let me check
backends need it to false to connect
nable-status=true
online-mode=false
oh no
its because minehut is a proxy
and then you create a proxy in a proxy
so minehut is online
but mine is offline
minehut is wierd
what
ok
so im hosting on mh right
mh is a proxy itself which you can join sub servers
other players servers
i created a bungee so its a bungee on a bungee.
im talking about the config option in your bungeecord config file, not what minecrap is displaying anywhere. config man.
my bungee needs to be offline to connect trhough minehut but the mh proxy is online
o.O
yes
ik that
im saying my config is offline mode because mh is online
@sour gorge i didnt realize you were talking about config.yml
online_mode: true
myb
what do i do?!?!
check the other points from the bot embed
it happened to me before bc i thought i saved spigot yml and didnt hit the button right
!bungeecheck
Please double check that:
1. BungeeCord config.yml has ip_forward and online_mode set to true
2. All backend servers' spigot.yml has bungeecord set to true
3. All backend servers' server.properties have online-mode set to false
shiz happens so better double triple check every single server fr
let me check.
they are all fine
they dont have a lp tho
prosím pomoc luckperms mi nefungujou když chci uložit role prefix nebo permise tak to nejde
bohuzial nikto nevidi nikomu do hlavy a z informacii ktore si poskytol nevieme vycucat absolutne nic co by zapricinalo dany problem
chcete screen? co mame za plugins
!nw
We really would absolutely love to help you out! However, telling us that it isn't working wastes everyone's time. Please, just describe the issue you're having clearly and with as much detail as possible, and send any relevant screenshots of whatever problems you're having.
bruh
nevím co po mě za informace chcete je to těžké když nevím co s tím je když prostě se snažím /lp editor uložit můj progress tak to nefuguje
odpočinout si. řekni nám, co jsi udělal. nebo lépe, ukaž nám. pak nám řekněte, co jste očekávali, že se stane.
lol, translator was doing its best :dd
Trying^^
vytvořil jsem v lp editoru rank owner a permise * ale nedalo to ani prefix ani práva
máš plugin pro chat a trezor? luckperms nepřidává předpony do chatu
vytvorit v editore a priradit groupku je rozdiel, luckperms prefixy, suffixy a ine hovadiny nepridava, teda sluzi iba ako 'zdroj'
ako spomenul Zeromaniac, potrebujes Vault a chat plugin (napr essentialschat, deluxechat atd...)
!chat
LuckPerms only acts as the source for prefixes / suffixes, it doesn't actually apply them. You need an appropriately configured chat/tablist formatting plugin for them to be displayed. If the values appear correctly when you run /lp user <user> info, LuckPerms is doing its job!
is it weird that i know very little slovenian and can still understand tiny parts here
this aint slo xD weird?
essentialsx != essentialsxchat
essentialsx + essentialsxchat + vault + luckperms = prefix in chat
A jakto že se mi nepřidali permise
vytvoril si groupku a do nej pridal permisie, ano?
Ano pak jsem si jí dal na svůj Nick
./lp user nick info
Mi to ukazovalo že mám owner rank ale ty permise ne
./lp group owner info
Okay děkuji jestli je možné dořešíme to zítra u nás už je půlnoc
A mám ještě otázku, co za plugin mužů přidat abych měl prefix i v tabu a aby mi to nerozbilo luckperms
Ok děkuji ráno to vyzkouším
correct!
no worries, we can make it work with hands and feet if all fails xD
xD
i understand a tiny bit 🤏
🤣
7
1.pad kdo co
2.pad bez koho čeho
3. Komu čemu
4 koho co
5 oslovujeme voláme
6 o Kom o čem
7 s kým čím
😖
vim ;)
I'm german :d
Nice moje škola učí německy jazyk. Ale jediné co mi pamatuji je rot Schwarz grunn And die schule
🤣
yea probably
No nic goodnight And thx
Hey so i want to put ranks on my server, with the name of the rank being next to the ingame name in chat
I tried doing it and got it working BUT the rank is being displayed 2 times
I use LuckyPerms and the only other chat based plugin might be EssentialsChat
check the pins ;)
oh nice thanks
Sorry to ask in here, but this is the most closely related project I could find to commodore. Is there something like a commodore support server as I am getting an error that I don't quite understand with it.
when i set the default group to have tpa commands perms and save it, my friends still dont have permissions to use those commands even though they are added to the group
Do /lp verbose command <the players name> /tpa and screenshot what it says and show me
Is it possible to change the LuckPerms prefix ([LP]) in the source code?
Im currently out of my house and i will most likely be back in 4 hours
!locale
Learn how to change all the message from LuckPerms.
i cant change it in the translations.
lp bulkupdate users delete "permission !~ group.%"
There is no message about this.
Yes there is
where
can you show me
??
where????
Is it possible to change the LuckPerms prefix ([LP]) in the source code?
How is temporary group time calculated? server time? Player online time? Can it be changed?
server time
can that change?
yes
you’ll have to search yourself
I have and I find NOTHING
where did you look
where in the source code
in all files.
clearly not lol
i deleted the server because someone started greifing and then people left because of that and ye since only like 2 people were still playing i had to delete it
can you tell me
I don't understand why you can't just say it.
Hey 1Angelus! Please don't tag helpful/staff members directly.
Cas probably doesn’t know
Your IDE should be able to search for the “lp” phrase
Or look in the Messages class
I did all that but found nothing.
That is terrible!
Are you sure it’s not at the top of the messages class?
I’m pretty sure it’s around the top
Yes I am sure.
Well then I’m not sure
Odd. 
??
It uses adventure components
And it’s called “prefix_component”
So maybe look for that
Triple check the messages class cause it is 100% there
🙂
Curious on what best practice when setting up one off perks that will only be available to someone when they make a purchase.
For example in my case, I am setting up backpacks, they come in tiers, from 1 to 6. Would it be best to give the player the specific permission to said tier or would it be best to set a track with different groups for each tier.
hope that makes sense..
Tracks just for that sounds more tedious than it has to be
if all purchases are based on permissions, and are individual, then just apply the permissions to the user directly.
no point in over complicating it
Perfect, that's kinda what I was thinking, but was hoping for a second opinion. Thank you both!
ahem
ARE THERE ANY AUTORANK MODS FOR FABRIC THAT WORK WITH LP!?!?!?!?!
Just add group.<rank> to the default group
greetings and thank you for your reply; i already have all the groups set. we are using a modpack that incorporates player levels 0-400. we want to make it so when they reach level, 40, they will be auto promoted
ok, so not that when they join a rank gets added. Well if you were gonna do that it would probably need a external plugin/mod to interact with luckperms and the modpack, idk if there is one. But there is no way i know of that luckperms could do that unless the modpack has some sort of context. https://luckperms.net/wiki/Context
Thank you good sir
why cant everyone use /playsound and why can helpers use /lp if they dont have access to it on the editor
/lp will only print to them the lp version
That is normal. They cant actually do anything with it
ok so i fixed the second problem but they still cant use /playsound
i didnt mean to switch truthfully
Idc what channel we talk in lol
Its just i told you how to debug permissions. So i cant help til i see the list after you did the command
at java.lang.Thread.run(Thread.java:833) [?:?]
[13:54:25 WARN] [LuckPerms]: A permission check was made for player _ClangMc - 00000000-0000-0000-0009-01fcdc57e4e8, but LuckPerms does not have any permissions data loaded for them. Perhaps their UUID has been altered since login?
java.lang.Exception: null
at me.lucko.luckperms.bungee.listeners.BungeePermissionCheckListener.onPlayerPermissionCheck(BungeePermissionCheckListener.java:67) ~[?:?]
at jdk.internal.reflect.GeneratedMethodAccessor27.invoke(Unknown Source) ~[?:?]
at jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) ~[?:?]
at java.lang.reflect.Method.invoke(Method.java:568) ~[?:?]
at net.md_5.bungee.event.EventHandlerMethod.invoke(EventHandlerMethod.java:19) ~[waterfall.jar:git:Waterfall-Bootstrap:1.18-R0.1-SNAPSHOT:ba3bbcc:483]
at net.md_5.bungee.event.EventBus.post(EventBus.java:50) ~[waterfall.jar:git:Waterfall-Bootstrap:1.18-R0.1-SNAPSHOT:ba3bbcc:483]
how can i fix this eror?
pretty sure it’s a java thing
what version do you use?
Uh that should not be physically possible. Either your server software or a plugin has modified their UUID. That will cause major issues, not just with LP.
Please send the output of /lpb info and your plugin list
oh derp failed at reading the stacktrace
edited
[14:12:07 ERROR]: [LuckPerms] Exception occurred whilst enabling SQL messaging service
java.lang.RuntimeException: java.sql.SQLTransientConnectionException: luckperms-hikari - Connection is not available, request timed out after 5000ms.
at me.lucko.luckperms.common.messaging.sql.SqlMessenger.init(SqlMessenger.java:57) ~[luckperms-jarinjar6753861937468469319.jar.tmp:?]
at me.lucko.luckperms.common.messaging.MessagingFactory$SqlMessengerProvider.obtain(MessagingFactory.java:195) ~[luckperms-jarinjar6753861937468469319.jar.tmp:?]
at me.lucko.luckperms.common.messaging.LuckPermsMessagingService.<init>(LuckPermsMessagingService.java:71) ~[luckperms-jarinjar6753861937468469319.jar.tmp:?]
at me.lucko.luckperms.common.messaging.MessagingFactory.getServiceFor(MessagingFactory.java:121) [luckperms-jarinjar6753861937468469319.jar.tmp:?]
at me.lucko.luckperms.bukkit.messaging.BukkitMessagingFactory.getServiceFor(BukkitMessagingFactory.java:64) [luckperms-jarinjar6753861937468469319.jar.tmp:?]
at me.lucko.luckperms.common.messaging.MessagingFactory.getInstance(MessagingFactory.java:89) [luckperms-jarinjar6753861937468469319.jar.tmp:?]
at me.lucko.luckperms.common.plugin.AbstractLuckPermsPlugin.enable(AbstractLuckPermsPlugin.java:170) [luckperms-jarinjar6753861937468469319.jar.tmp:?]
at me.lucko.luckperms.bukkit.LPBukkitBootstrap.onEnable(LPBukkitBootstrap.java:177) [luckperms-jarinjar6753861937468469319.jar.tmp:?]
at me.lucko.luckperms.bukkit.loader.BukkitLoaderPlugin.onEnable(BukkitLoaderPlugin.java:51) [LuckPerms-Bukkit-5.4.9%20(2).jar:?]
at org.bukkit.plugin.java.JavaPlugin.setEnabled(JavaPlugin.java:321) [spigot-1.8.8.jar:git-Spigot-21fe707-741a1bd]
at org.bukkit.plugin.java.JavaPluginLoader.enablePlugin(JavaPluginLoader.java:340) [spigot-1.8.8.jar:git-Spigot-21fe707-741a1bd]
at org.bukkit.plugin.SimplePluginManager.enablePlugin(SimplePluginManager.java:405) [spigot-1.8.8.jar:git-Spigot-21fe707-741a1bd]
at org.bukkit.craftbukkit.v1_8_R3.CraftServer.loadPlugin(CraftServer.java:357) [spigot-1.8.8.jar:git-Spigot-21fe707-741a1bd]
at org.bukkit.craftbukkit.v1_8_R3.CraftServer.enablePlugins(CraftServer.java:317) [spigot-1.8.8.jar:git-Spigot-21fe707-741a1bd]
at net.minecraft.server.v1_8_R3.DedicatedServer.init(DedicatedServer.java:199) [spigot-1.8.8.jar:git-Spigot-21fe707-741a1bd]
at net.minecraft.server.v1_8_R3.MinecraftServer.run(MinecraftServer.java:525) [spigot-1.8.8.jar:git-Spigot-21fe707-741a1bd]
at java.lang.Thread.run(Thread.java:748) [?:1.8.0_312]
Caused by: java.sql.SQLTransientConnectionException: luckperms-hikari - Connection is not available, request timed out after 5000ms.
at me.lucko.luckperms.lib.hikari.pool.HikariPool.createTimeoutException(HikariPool.java:696) ~[?:?]
at me.lucko.luckperms.lib.hikari.pool.HikariPool.getConnection(HikariPool.java:197) ~[?:?]
at me.lucko.luckperms.lib.hikari.pool.HikariPool.getConnection(HikariPool.java:162) ~[?:?]
at me.lucko.luckperms.lib.hikari.HikariDataSource.getConnection(HikariDataSource.java:100) ~[?:?]
at me.lucko.luckperms.common.storage.implementation.sql.connection.hikari.HikariConnectionFactory.getConnection(HikariConnectionFactory.java:174) ~[?:?]
at me.lucko.luckperms.common.messaging.sql.SqlMessenger.getConnection(SqlMessenger.java:85) ~[?:?]
at me.lucko.luckperms.common.messaging.sql.AbstractSqlMessenger.init(AbstractSqlMessenger.java:61) ~[?:?]
at me.lucko.luckperms.common.messaging.sql.SqlMessenger.init(SqlMessenger.java:55) ~[?:?]
... 16 more
what is that PLEASE ?
Ey its me, probably one of too many persons asking for argument based permission nodes. The wiki entry is confusing as fuck. It did not work for me and at some point I tried shovelling more and more nodes into my group to see if something stick eventually. All I want is them only be able to add 2 parents.
Is there some sort of tool/cmd that lets me execute a commadn and see verbose what nodes are being checked for that and a which point there is a (mis)match?
Verbose will definitely help with that, /lp verbose on <username> & luckperms.parent.add, then when the player for that username runs any lp parent add command it will show what is being evaluated and the result
Oh lol, verbose does literally that? I did not know. Thats neat thank you I will try it out later :)
I think i am doing ti wrong./lp verbose on lerokko & luckperms.parent.add will not show anything in console when I do /lp user lerokko parent add player. In chat it just says the expected "You do not have permission..."
hi
this is my survival chat in discord it shows the lp group the users in like here is Jrstaff
I would like not to show the group the users in
thats related to DISCORD SRV (or whatever discord plugin your using), not luckperms so you'd use #general for that
ok thx
What to do if it says that the command is unknown
Sounds like whatever plugin that command is from hasn't loaded properly?
or you mistyped the command
Hello, I recently updated luckperms on my network and since then some permissions fail, the permissions are set correctly but for some reason it doesn't detect them.
don’t cross post
Excuse me, can you help me?
My server crashes with this error, please look at the administration https://pastebin.com/WACrhqzG
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
don’t cross post
Cross post
I just figured out the solution with someone else. Try letting luckperms regenerate a new config file. This may or may not help you too, but worth a shot. Id appreciate if you could let me know if that works for you.
Is it ok to add LuckPerms to an existing paperMC server?
yes !
Do I need to setup storage options for LP, or is default storage fine for an in house server I run for me and about 20 friends.
are you only running a single server?
Only one.
then H2 (default) should be fine
Do not cross post
hello zero, i have narrowed down the issue and it's not an issue with luckperms it was caused by pl hide pro, another plugin i had updated, nonetheless thank you very much for your fast support and I wish you a great day. :)
Ah ye that explains it. Glad you figured it out :)
so i downloaded the plugin and uploaded it to my server, i used the 1.7.10 legacy version it is a 1.7.10 cauldron server but the plugin does not work (i have vault installed)
Im trying to set up ranks on my waterfall/bungee cord server with luckperms. Everything works fine but when I try to add a prefix it doesn’t show in the tab list or chat. How can I do this?
afaik lp doesn't deal with tab settings. You'll need to upload a separate plugin. Either Essentials, CMI or TAB.
!chat
LuckPerms only acts as the source for prefixes / suffixes, it doesn't actually apply them. You need an appropriately configured chat/tablist formatting plugin for them to be displayed. If the values appear correctly when you run /lp user <user> info, LuckPerms is doing its job!
need help
https://gyazo.com/6208ffdf99dadc719cdf63a55ee925ee
Gyazo
Gyazo
Gyazo
how to have space between rank and name?
dont cross post
You have basically have"&8[RANK]" what you need is "&8[RANK] &8"
The space is important
Hello, I would like to organize my tablist by weight.
Example:
Admin (Weight 10) > Default (Weight 0)
=>
Admin Player1
Default Player2
Default Player3
Do you have a plugin to advise me?
TAB by neznamy can do that.
Yes, but you have to rearrange it in the TAB configuration too, right?
When I run the command /lp editor, nothing happens. Nothing pops up on the console and it doesn't generate me the link. I don't have this issue when logged in on another computer though so it's got to be something on my end but I'm not sure what. Anyone have any ideas?
Perhaps forge on client?
if so, update your LP
Yup that was it! Thank you!

I want to use command blocks, however I can't op myself because the vanilla op system is not enabled. How can I allow myself to use command blocks?
Should i use TAB or NametagEdit. currently i have nametagedit and u need create the ranks every time on lp as well as nametagedit, is tab the same?
TAB has placeholder api support so nope ;)
what if the prefixes are too long? i am on 1.8
also does lp require vault?
no, but other plugins may need vault to get info from lp.
ill keep vault on all my servers then just in case
generally a good rule of thumb to have it. a ton of plugins use vault
Vault is only an API so might as well
nametagedit have place holder api support too
worth the ping tho ¯\_(ツ)_/¯
TAB still does it better.
TAB always felt like bloatware to me
Can anyone help me?
Luckperms doesn’t allow the essentials plugins to work unless your op
Thats the whole point of having a permission plugin. Youll have to add permissions to groups/users
Hey my luckperms isn’t work on my a shop plug-in it used to but now it won’t
/wild
Kit wdym?
What permission did you add to allow the command?
I used just /wild
Me or noble
Tysm
Hey my luckperms isn’t work on my a shop plug-in it used to but now it won’t
Probably a problem on their end
what should i do??? i tried reinstalling
its guishop
Send a picture of /plugins before you take up every single channel here
with or without op?
Doesn't matter to me, i want to check if you have a plugin installed that is incompatible with luckperms
its the guishop one and it used to work
You do have one of them
mcmmo was installed after the problem
yep
So why do you install powerranks, which is trying to literally do the same thing? It chokes lp and makes it not work. No matter what you have in lp now, powerranks also checks permissions in its own files and you didn't set shop perms in poweranks
You have a double layer for permissions
Just don't blindly install plugins again <.<
alr tysm
Hey, i have a problem. I have prefixes for both "Valor" and "Owner" group but only the owner group shows up
So you try to do meta stacking?
I guess, is that the only way to do multiple group prefixes?
Yes it is. Otherwise, lp will only apply the highest prefix from all over and apply it to you
So did you change that in the lp config?
I'm wondering why you added track donor while there is no donor track in your lp
Unlikely. But I wouldn't say impossible
is /reload enough or should i restart
Never use '/reload'
It breaks lp and other plugins
I see the problem @wooden vigil
Much better
you think that was it?
Yes 100%
it worked thanks!
I just rename a new rank
same issue.
from partner to headadmin and I remove headadmin rank
Last time I'll repeat myself: Luckperms does NOT add prefixes/groupnames or suffixes to tablist!
You
need
a
tablist
plugin
and
configure it!
OKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK
THANNNNNNNNNNNNNNNNNNNNNNNNKS
@sour gorge
What?
i want help for api
If you can't interpret a simple if statement or respect when someone asks to not get pinged, maybe you shouldn't.
i don`t know english
LOL
Quit pinging me.
Hello, Good evening! What is the permission to set a % chance that a group drops a spawners?
I have a problem I put a prefix and the prefix does not appear in the chat I put this command/lp group Owner meta addprefix 100 "&4[Owener] "
I think you need skript to do that
Do setprefix.
I'm having issues with luckperms bungee, and idk how to set it up properly. Do I need to change something in the config for it to work? Or is it just glitched?
Also I was wondering, if you use luckperms bungee, do you still need luckperms spigot in all spigot servers for it to work?
Hmmm, okay! Thanks so much for the fast response :)
But
There's always a but
I think I have the spigot versions in all my spigot servers. And it still won't work :(
Yea just checked, they're all in there
I'm assuming that you first set up permissions on the bungee in /lpb and that ypur servers arent connected via mysql so they do not know what each other have for data
Yea they're not set up to mysql
So I first need to link all the spigot ones to the same database?
Bc then I'm screwed. Bc our host doesn't let me make a database xD
Yea so atm, they operate independently.
You do not have to use a remote database for all of them but if you want to change perms on one server and the others to auto-get the change, or people to have the same ranks on all servers also auto on change on one of the connected servers, you'll need that. Otherwise you'll have to propagate changes manually to all servers
You can also just operate each lp instance separately ngl but it sounds tedious to me.
Yea so it does sound like I need a database then, because we want the all linked up
I filed a new ticket to my host (3rd one) about the issue that I can't create one. I hope they respond this time and that I can make a database asap :)
Thanks for the help atleast! Now I know a bit more
No problem. Merging multiple different so-far-independent setups can get tedious. So if you get there, make sure you don't jump into in headlessly. You need to keep in mind the following things:
- Just as with any lp instance, there can only be one default group. It is to be expected that default will be merged into one group when you do this, and if your default group on each server have different permissions and you want to restrict them, you would do yourself a huge favor if you added context to nodes on each server you do not want to propagate to be global on all servers later
- The same thing goes for users and your other groups, users who have lets say admin on your survival server may have just mod on another server in context 'global' , merging it just like this will cause the user to get admin everywhere and mod everywhere
Adding context beforehand is not actually a bad idea and lets you use the time you wait for the response. Remember that server context refers to the name of the server inside the lp config. So you can actually do this already if you want as long as you match up contexts. You don't need to, obviously, I just wanna prepare you for what's going to happen
Yea, otherwise people might have creative mode access in both the creative and survival server, and you won't want that
It's a good bit of advice, so I will take this into mind when switching over to the databases :)
Do you also know like which server it takes the permissions from when you link them together? My guess is that it's first one you link up to it?
See this is the error that pops up when making one. Or am I missing something very obvious here?
Exactly that :)
You can force all data to be written like this https://luckperms.net/wiki/General-Commands#lp-networksync
But you can also do this before you have a database to begin with. Remember that lp has /lp export. Technically speaking, you could make a test server rn and take an export from all of your servers, move that zip file from all of them into your test server, import them all there and you'll have bundled in one server what you'd have in mysql.
Pterodactyl I see
Hmmm, okay
Yes
Do you have access to the admin panel there?
I think so?
The gear icon at the top right
My mate gave me all permissions on the panel, so I should be able to
Yea I do, it was bottom left though 😅
Gives you the SFTP details and such?
Ah. I'm usaing a theme so might not be 100% accurate
Let me show you
So this is my test server that I blow up on a regular basis https://i.imgur.com/oz7RJrY.png
At the top right you see i have an icon with 3 gears
Y e s
That's how i get to this part: https://i.imgur.com/N3d7nFs.png
That's bottom left for me! I clicked it
Okay, go to 'Servers' there
Nope, I don't get this at all
I just get the SFTP details
Sounds like your user is not admin on this panel then
Servers -> Click any server and then in the tab 'Build configuration' you get to set a database limit
For me it's 0 gah haha
Ahhhh, I see
It could also be that your server simply doesn't have mysql installed to begin with?
Not sure, never tried that tbh, always did mysql as soon as i could get my hands on the server
I'll ask the actual owner of the server to see if he can do it
I have a written tutorial for installing mysql on a vps using ptero if you need. I haven't done that too often yet either so I decided to write down what I did, including the rage in between. Might be of help, might not.
Yea well iirc, I blocked my msql connection via iptables and i just wanted to die lol
Lmao, sounds fun

The color of my name is the same color as the rank
Add &r or another color code at the end of your rank prefix
So like &6&lHelper&r
ok
Aye double prefix.
Love to see it, lel
its not working
Hmmmm
its anther problem
This is the format that I use for my helper rank
As you can see, the &r at the end of it to make the playername white
What's the 45?
Weight
It's because prefix and name is the same placeholder
And should not be at first "
So how do you fix it?
So basically the 45 is called "weight" and it's there for player that have multiple ranks.
If say I put a helper rank and an owner rank on my player, and the weight of my owner rank is 50 (higher then 45) it will give me the prefix of owner :)
I hope this is explained well? xD
I realised
and the weight of my owner rank....
careful when you say 'weight', better differenciate between 'prefix weight' and 'group weight'
Nice!
ive seen ppl think group weight determines prefixes <.<
Y e s
i think meta its prefixes
I think, I recall, THINK, the double prefix has to do with your chat plugin. Which plugin do you use to define your chat format?
EssentialsXChat-2.19.4.jar
Bc I had the issue aswell when I started with my server, but it's been so long ago I don't even remember xD
Ah yes I used that aswell
If what are you using now?
LuckPermsChat I think
😄
Bruh honestly, now that I look at it again, I don't even know xD
We do have EssentialsChat installed, but our format is just not adding up to what we have on the server
so you now How to solve
Well you can atleast try this (one sec)
Again, it is explained in the pinned message
There are 3 posts attached
@wind widget It is, yea
thx
No worries, I hope it works :)
Go to your console right
ok
Then plugins -> Essentials -> config.yml -> Then go to line 60 ish like it says in the screenshot
And then follow those steps
ok
Changing the chat format is at like line 900 in config.yml
But pretty sure you don't have to change anything there
ok
Did it work? :D
no
the double
What was recorded in what you sent
Okay, and you got all that changed in the config.yml now?
Did you first of all save the file? And second of all did you type /essentials reload ingame?
Mind if I smart-poop in here?
yes
Go ahead 💀
Weird
The prefix [STAFF] is rather unspecific to essentials
Check their /plugins
essx isnt the only one having formats that can cause doubles
I see what you mean, yea
so ehat more?
Do you also use Multiverse by any chance? I think you can also do chat formats there
yes
Yea then you also gotta check in there
what check there
I'm not all to familiair with it, but I do have it installed on my creative server. So I could take a look for you
Iirc it would use world names in [] by default
What the chat format is in the config.yml of Multiverse :)
yes pls
My guess is that it's this, and then put the prefixchat: to false, like it is in my screenshot
Yea that might be a good idea at this point 💀
||pr?||
its my plugins
stylizer?
shhhh let kevo figure it out
I don't see anything other then Essentials that could cause it, but I never heard of MuteChat and Stylizer before, so maybe those, idk?
xD
stylizer is a chat and tablist formatter
💀
made by omega whom you can see as mod on the right ->
Then it's most likely that xD
I don't know if you still wanna use it for your tab?
Because if so you shouldn't delete it
ok
Open the config if it has one and try to search for something that has to do with chat formatting
ok
Any idea how to get "HelpFul" role?
I guess it's given to you at some point, idk
Offered, not just given
But seeing that "Zero" doesn't have one yet, idk xD
I used to
Ah, so you must've declined
Yo kevo u got an smp?
Ehmmm, I guess so? Isn't smp just a survival server?
Alr Alr
I'm not used to using the term smp, hahaha
But yes, we do have a survival server
That's for a future project, not rn

