You can download LuckPerms for Bukkit/Spigot/Paper, BungeeCord, Sponge, Fabric, Nukkit and Velocity.
Additional downloads
1 messages · Page 88 of 1
You can download LuckPerms for Bukkit/Spigot/Paper, BungeeCord, Sponge, Fabric, Nukkit and Velocity.
Como faço um banco de dados do luckperms
Does anyone know how to allow players to use "*" in reference to "all players" instead of it showing "player not found"
what's the context?
I'm looking to allow people do to "/p deny *" then that will deny everyone from their plot. When they try it now it just says Player not found. If an OP does it it successfully denies everyone.
!verbose Well I don't know what plugin that is but if it's perms based I'm sure verbose will help
LuckPerms provides a verbose command to help you find out what permissions a command/plugin is checking.
Is it possible to allow a staff group to promote users to groups underneath their own?
https://luckperms.net/wiki/Argument-based-command-permissions
I guess that's the page you should look at then
I don't speak Portuguese but hopefully this will help
https://mariadb.com/kb/en/getting-installing-and-upgrading-mariadb/
Yo, I finally was able to load it and port the pex groups to luckperms, but i ran into an issue, prefixes and suffixes dont show
How do i automatically assign a role?
/lp user [nick] parent set [role]
What do i replace [nick] with so that everyone gets the role?
Everyone that is on your server right now?
Everyone that ever was on your server up until that point?
Or everyone that ever was on your server plus all new players?
No, if they do a specific thing in the server, a command would automatically give them a role.
You need a plugin for that
Yeah i know that, i already have a plugin for that. What i want is when they do that specific thing what do i type instead of [nick] so that player gets the role?
Depends on that plugin
Placeholders are handled by the plugin executing the command, not the plugin the executed command belongs to
So you mean that the plugin that is executing the command should have %player% placeholder?
Okay, thanks for the response, figured it out.
👍
Relog @true snow
Hi Frukis , may i know what plugin is that ? I am finding the same features . Thanks 😊
they left lol
Sorry to bug you guys.
Updated to 1.17 and Deluxechat isn't playing nicely with Luckperms prefixes now.
I tried running the papi eclous download Luckperms command with a reload and restart.
Also tried manually installing the expansion.
When I parse, nothing happens.
And when I chat, it shows:
%luckperms_prefix% NAME > message
I assume I must be doing something incorrectly.
Using Deluxechat-1.17, LuckPerms-Bukkit-5.3.53, and PlaceholderAPI-2.10.10
"nothing happens" as in "nothing shows up" or what?
%luckperms_prefix% shows up in white text when I parse.
So when I run: /papi parse me %luckperms_prefix%
I get white text in the chat showing: %luckperms_prefix%
hm, does /papi list show the LP expansion?
Interesting, no it doesn't.
I have LuckPermsMVdWHook in my plugins folder and the Expansion-LuckPerms in the expansions folder.
hm uh screenshot /lp info I guess?
Also run /papi dump and share the link in here while you're at it
Hm do the following:
plugins/PlaceholderAPI/expansions/Expansion-LuckPerms.jar filealso you might as well delete the MVdW LP expansion since you don't have MVdWPlaceholderAPI installed anyway
/papi ecloud download LuckPerms/papi reload/papi list and/or /papi parse <player> %luckperms_prefix% or something idkcuz it works for me lol
Please use https://paste.lucko.me to send files in the future. I have automatically uploaded message.txt for you: https://paste.lucko.me/tCoY40I7JT
./papi list does not show luckperms still (I assume because of whatever is happening in the error)
oh I see what's going on
you have the EssentialsX expansion
but you don't have EssentialsX
so it just blows up
given that I see you use CMI you probably don't want the EssX expansion in the first place
yw
Guys how to get a group in luck perm?
for what purpose?
not sure how to answer lol
I need luck perm to solve the multiverese core problem
Some person told me i need a group by luck perm
!usage
Here's a guide to help users understand and use LuckPerms for the first time.
can I setup multiple permissions with 1 command
for example ^
No
Imagine waiting hours to get an answer, get pinged and it says "No" 🥲
Rude :/
At least say, "sadly you can not" or something, True I'm potato but I have emotions
lol
You can do multiple perms in the editor though can't you?
Just confirmed on the Demo, Luckperms on top of it again!
but not with different values (true/false) tho
Oooo I suppose that's true
Still, large perms list, splitting between true/false isn't the hardest thing to do.
Hey, duration permission for group it's possible?
%luckperms_expiry_time% (player check i want group check)
yea
there is an expiry time placeholder specifically for inherited groups
!placeholders uh somewhere in there
Display data such as user prefixes and groups from LuckPerms in other plugins.
not for permission group duration
why not use the placeholder designed specifically for checking temp parent groups?
I would like to retrieve the remaining time of a temporary permission assigned to the group default (placeholder) do you have an example?
oh I see what you mean
you have a temp permission on the default group
and you want to get the remaining duration?
%luckperms_inherited_expiry_time_<permission>% should work
yea
yea
yea
mood

Hi.
I hope I'm not doing wrong posting here my request for support.
I'm setting up a bungee server which has a queue system which relies on ajqueue; I tried using luckperms to remove permissions for ajqueue commands (by setting nodes such as ajqueue.command.ajqueue to false), but it just seems to not work, and after trying for two days (even with command-blocking plugins such as command blocker) I'm completely lost.
Thanks for your time 🙂
is the ajqueue plugin on the proxy or on a backend server?
It's on the proxy
do you also have LP on the proxy?
Yeah
screenshot /lpb info
or not
Sorry, I've had enough for today... I'll do my best to be back tomorrow as soon as I can
okay so little question. I did get the prefixes to work,
but, now it shows as [admin] [I] [guest] [starfruit] Bubbery
is there a way to make it so users that have a donator rank dont get the prefix for in game ranks
and staff members dont get all of the other prefixes?
or is that something that cant be done with luckperms?
What plugin are you using for chat configuration?
the only plugin we have for chat right now is essentials
in a perfect world id want chat to look like
[Admin] Bubbery
[I] [Starfruit] Bubbery
or
[I] [Guest] Bubbery
without having all 4 at once for everyone
along with the meta stacking and tracks?
So for your Admin group you would go into the essentials config and change the group format for Admin
sorry for being difficult im used to group manager.
no worries
sinner
okay, and make it so that essentials chat would override the formatting that luckperms is doing?
for the staff ranks only
I would recommend make it so that EssentialsXChat is doing the formatting, I don't believe LuckPerms handles that
luckperms is doing the multiple prefixes, is what imean
oh yeah yeah okay
So I would have a track for your voting I to X, then for your admin group format I would do the following:
admin: '%luckperms_prefix_highest% {playername}: {message}'
I think it's something like that (correct me if I'm wrong Emily)
i would do the admin group format in the essentials config?
Yes
should i not have a track for staff then?
You could do it that way too
thats how i have it now im just having a hard time figuring out how to not have staff members have all these other damn prefixes from the other 3 tracks
because theres the staff track, vote track, ingame track, and donor track
and its giving staff members the lowest prefix for all the other tracks as well as their staff rank
Yeah so for each staff group you would set that in essentialschat config
okay okay
You would just have it be it's own group formatting
got it
okay ill try it out
So I'm trying to set someones rank to admin when they are offline, they have joined the server before and are stored in lp_uuid collection. However, it doesn't update/add a document to the lp_users collection. Therefore, when I try and get their rank whether it being a primary or secondary rank, I can't as its not in the collection or stored locally as they are not online. Is there a way I can fix this?
if the uuid is in the lp_uuid collection then you should be able to run commands under the player's name while they are offline
what does it say when you run a cmd for the user?
I’m not running a command I’m first checking if they are in the apis cache but as they haven’t logged in the are not, then I check the database myself and there is no document in the lp_users collection. So pretty much I can’t get info on a player if they are offline until they login. I was wondering if this was meant and I’m missing something.
So I am making a command in my own plug-in that rolls back punishments, when it displays the message saying it’s complete, I want it to show the display name of the person you rolled back. This person has logged into the server before. Now they are offline I give them the admin group. It updates and sends the alert across redis messaging service. When I use the luckperms editor it shows them as admin. However, the collection on mongo doesn’t show their new rank. So when I try and load their rank using the LuckPermsAPI I can’t as the are not online/on the correct server. Then I need to lookup the database but the data is not there
well first off #luckperms-api
secondly, show some code, how are you looking up the UUID, how are you giving the player the group, etc etc
Well i think i found this issue, for some reason its storing some names with capitals and others with not :/ That would be the only question I have now of why that is
that really really shouldn't be the case, has anyone modified the database manually?
because not even with the API you can make that happen lol
first one
no one has access apart from me and i am 100% sure i haven't changed it
Although its all good now, I just need to make an insensitive mongo query
you shouldn't really fiddle with the db itself either
that's what the api is for......
??
did this work?
Missing a .
?
Hello my server and in 1.7.10 and I cannot install luckperms, I put them in the plugins folder of my then I restart them and the plugins do not appear in the list of plugins when I do / lp help or other it does not work the (the plugins is not installed) I install the legacy bukkit version
@daring stirrup
Hey Agronyth! Please don't tag helpful/staff members directly.
luckperms.*
what should i do with the link ??
read it
we need logs
we are not psychic
I asked for logs and you went to another channel
not that hard
Hey. So my friend accidentally set some permission that doesn't allow us to place blocks and we don't know which one is it
Check if you have essentials anti build xD
!verbose can help finding what perm is now missing :)
LuckPerms provides a verbose command to help you find out what permissions a command/plugin is checking.
@mighty yarrow https://paste.lucko.me/aGpbDXPvo8
Hey Exfue! Please don't tag helpful/staff members directly.
so it is at Essentials?
!thermos
Installing LuckPerms on a Cauldron, Thermos and any other Forge + Bukkit server software may require additional steps.
@formal leaf try that
If you have essentials anti build installed but you do not want to restrict building anywhere or the use of certain items, it would be safe to delete ONLY the EssentialsANTIBUILD.jar (pls dont delete the essentials.jar lol)
If you need some of it's restrictive features, then again you can use verbose to find out what perms you'd need
omg thanks, I see it now xd
Please make yourself aware of what the plugins you install actually do to avoid confusion in the future.
Sure thing. Thank you so much 😄
so if I deop myself I should still be able to /ban players now?
Try it and see
you saved and applied the edits?
/lp verbose command <yourname> ban?
@mighty yarrow where is it
Hey Exfue! Please don't tag helpful/staff members directly.
why is it linking to that 
hm
scroll down ig
I fall on her when I click on the line I understand nothing @mighty yarrow
Hey Exfue! Please don't tag helpful/staff members directly.
scroll down to this one
okay
Navigate to the libraries/net/md-5/SpecialSource/1.7-SNAPSHOT directory
Delete the SpecialSource-1.7-SNAPSHOT.jar file
where is it
@mighty yarrow
Hey Exfue! Please don't tag helpful/staff members directly.
in your server files
which?
look in your server root folder
there should be a libraries folder
might be called something else idk
but similar to that
what is the root folder of a server?
How do I allow other ppl to use commands from CoreProtect
Assign the permission that is required
Look, every plugin has it's own perms. We aren't a permission nodes provider group here, you need to look them up in the wiki of the plugin you want to give perms for
@prisma hinge Hello can you help me, my server is in cauldron version I cannot install luckperms, I am trying to understand your explanation (screen if attached) but I cannot find the directory of my server could you tell me where what it is (verygames host)
You already dmed me, stop being so pushy!
I do not use cauldron so I have no damn idea!
okay sorry
A good idea would be if you actually did what samosa already told you...
He didnt say those things to be an ass, he told you what to do
Your server root is just like, where your folders are. plugins folder, world folder etc
if you don't know where it is, ask your host
Pls help me ? [luckperms-scheduler-worker-1] WARN me.lucko.luckperms.lib.hikari.pool.PoolBase - luckperms-hikari - Failed to validate connection me.lucko.luckperms.lib.mysql.cj.jdbc.ConnectionImpl@5a044d57 (No operations allowed after connection closed.). Possibly consider using a shorter maxLifetime value.
@vestal crystal no reason to cross post, #support-1
those suggestions in the editor are just suggestions, they dont update to what is actually available. You can still type in that permission manually and it will work
np 😄
how do i stop a staff member accessing creative
you'll want to set the permission for gamemode creative to false for staff groups
how do i do that like with permission nodes
Are you familiar with LP whatsoever?
not really im pretty new to it after using permx for like the longest time ever
In that case if you're new I highly recommend reading the usage guide, it contains every bit of info you need to know to get going (+ a few examples)
Here's a guide to help users understand and use LuckPerms for the first time.
err im not sure where to find on how to disable a specific gamemode
I mean there isn't a specific example precisely for that
granting/denying permissions is a general concept
thats what im after because i have a server owner whos asked me (dev) to disable the usage of creative with the admins as one of the admins has been asked to stop doing it is continuing to use creative so im just looking on how to stop the entire group from doing it
well that also depends specifically in which plugin is overriding the gamemode command (and I say is overriding because it is not possible with the vanilla gamemode command, as it does not provide fine-tuned permissions)
Q: "I have EssentialsX/CMI/whatever, it has its own gamemode command, can I do that with it?"
A: Yes, see for their permissions list here #support-1 message
yeh ive looked at the whole essentials gm permission node but that disables the ability to change gamemodes entirely
hi im new to LP and was following the yt guide, but somehow i cant get it to work. Im wondering if there are any other plugins it conflicts with. I cant even get the prefix/suffix to work. Any tips?
Lp only conflicts with other permission plugins, such as permissionex (pex) and others
Powerranks for example are a problem too
oh, hmm i must have messed up somewhere then
!chat
LuckPerms only acts as the source for prefixes / suffixes, it doesn't actually apply them. You need an appropriately configured chat/tablist formatting plugin for them to be displayed. If the values appear correctly when you run /lp user <user> info, LuckPerms is doing its job!
i have essentials x, is that outdated now?
not at all
give the bubble a read
you'll also need vault
and the extra JAR EssentialsXChat
ohhh thats good to know thanks! i'll get it right away
https://essentialsx.net has the latest and greatest versions of all the jars
The essential plugin for Spigot servers.
im pretty sure i got the updated x/chat but was missing vault
oh woah, it was really jhust vault that i didnt have, thank you!
no worries
Hi everyone, I have the problem that messages are no longer displayed to me when I do something on the rights like assigning groups or something. Can you help me there. LG Julian
So all the messages are gone?
Ich kann auch deutsch schreiben
Ist mir gleich
Hast du op?
Hast du das vielleicht in der config verändert? Ich bin mir nicht mehr 100 prozentig sicher, aber ich glaube da gibts ne einstellung für
ne ich habe nichts an den einstellungen gemacht. Ich habe es raufgezogen und rollen erstellt
ich habe seit 1 jahr ca. Luckperms und andere perms systeme benutzt. Und seit dem ich luckperms benutze ist das noch nicht passiert
Hast du vielleicht eine rolle, worüf die 'see permission' auf false gestellt ist?
nein
Sicher? Auch nicht über inherit?
Komisch, wann hat das angefangen?
seit ca. heute um 19 uht
Dann wast hast du sonst so gemacht um die uhrzeit?
Irgendwas muss sich ja geändert haben
ich habe plugins auf deutsch geschrieben und plugins auf den neusten stand gesetzt
mehr rechte hab ich nicht eingestellt
und das bei jeder rolle
Was steht in deinem /lp info
5.3.53
ja ich habe die plugins seit 5 monaten ca auf meinem laptop drauf
Alte plugins zu benutzen ist ne scheiß idee. Übrigends ist deine version so weit veraltet, dass es sein kann, dass die verbuggt ist. Ich hab in letzter zeit gehört dass leute mit alten lp jars sowas wie 'gehackt' werden können. Was das genau war, weiß ich nicht
!download
You can download LuckPerms for Bukkit/Spigot/Paper, BungeeCord, Sponge, Fabric, Nukkit and Velocity.
Bitte updaten
Bin mal gespannt
Weil deine version steinalt war? xD
Ich hatte sogar die Version 5.3.42 auf meinem Laptop
Danke für die Hilfe und deine Zeit
hatte aber einfach noch die alte version von meinen anderen Server verwendet
Das erste, was du immer tun solltest, wenn was im arsch ist, egal ob du glaubst dass du die neueste version hast, egal was, guck ob's updates gibt. Das hätte dir jetzt zeit und nerven gespart
:P
Danke nochmal.
Denn Tipp werde ich mir hinter die Ohren schreiben

so ich mach mal meine Arbeit weiter
Viel spaß damit. Schreib mir ruhig ne pm, sollte nochmal was sein, ich find dich irgendwie sympatisch xD
wenn du annimmst kann ich dir schreiben
da ich das anschreiben von nicht befreundeten ausgemacht habe
Alles gut 👍
man schreibt
what permission is the permission to send messages in chat?
what do you mean by "send messages in chat" ?
is there a permission that allows players to send messages in game chat?
so if I wanted to mute a player I could remove that permission from them
There's literally no need for that lol
Just use a plugin for chat such as essentialsxchat and do /mute name time
(assuming that (s)he has some ban managment plugin installed)
Never assume^^ I made that mistake plenty of times
that doesn't answer my question
Ok, no there is no permission for chat.
alright, thanks
Look, the permissions vary from plugin to plugin. We have no idea if even you are using one or not. If you are, then you will have to look up the perms of the plugin you are using.
I was just wondering if there was a vanilla permission
speaking of which, is there a website where I can see a list of all the vanilla permissions?
thanks
Hello, I have luckperms on bungeecord and if I have permissions for, for example, kits, it does not work at all
Do you have luckperms on all the other servers as well. and connected them to the same remote database
no, I only have luckperms on the bungeecord
!bungee Read this.
If you run a BungeeCord network, learn how to correctly setup LuckPerms on all server instances (including Bungee).
Syncing data between servers
I don't understand how to do it
Install the normal version on all other servers. Then get a remote database like MySQL and set up luckperms on all servers to use the database.
Hello ! My issue is when i grant rank to a user through lpb and my all servers are connected to it so when i grant rank it is only granted in the server in which the user is not in the other servers any fix
hello! i am using essentialsX and luck perms and without operator i am not able to break any block or do anything how can i fix it?
Hey, is there a possibility via LuckPerms to extend all temporary ranks (+ permissions) via a command.
For example as compensation in the event of a server failure.
Temporary permissions would be less important, I'm mainly concerned with the temporary ranks.
Thanks in advance!
Hey thank for the quick reply.
I think, you misunderstood me.
I already know the "addtemp" function, but I am looking for a way to extend all temporary ranks by a certain time factor. Is such a thing possible?
hello, was wondering how i could make players have all permissions by default from the default group, and the A group as a sub group, not sure how to do this?
!inheritance
Learn about inheritance.
I recenetly got a new machine, and i just hooked up everything global bungee through proxy etc.
but it seems like all the groups / users are now gone?
how do I go about fixing this
i asked you a question in #support-1 ....
oh i didn't see it
um how do you add someone to a group?
!usage
Here's a guide to help users understand and use LuckPerms for the first time.
How do I let all players use a certain plugin. Because right now, they do not have permission to use the plugin.
You can use /lp editor which will create a link for you to copy into a browser and allow you to edit permissions from there or you can do /lp group [GROUP NAME] permission [PERMISSION NAME] which is mostly the complex way if you're looking for a easier way to do it I would recommend the ediotr.
I am using fabric minecraft and I want to add the minecraft vanilla commands to a group, but they do not show up in the luckperms web editor. Is there a mod or addon or something that I can use to make this possible? please @ mention me when you reply.
have you tried?
Please use https://paste.lucko.me to send files in the future. I have automatically uploaded console.txt for you: https://paste.lucko.me/6KJuD9PnNF
works fine for me
I can try and help in #general though, I make no guarantees as the mod isn't mine nor I know it well at all
does it have any dependencies?
so, the command /server hub command (to all) was working...
I just left it for a few hours, boot up waterfall(bungeecord) and now that command is not working. I'm using luckperms bungee and MySQL remote database.
I just copy-pasted the permission to the rest of the permission node (admin, mod, member)
also, ping me so that I can get back here while working to the rest of my network
Hello, is it possible to somehow return the deleted privileges?
Error messages? Permission denied errors? Did you try verbose?
@sleek hemlock
Nope... nada... just nothing happens
Oops, sorry for the ping
try verbose to see if it is a permission related error or if maybe something else affects it (if no permissions are being checked, the command does not exist or is being overwritten)
Alright, I'll check later, I'll just finish this...
It does recognize/report the commands/permission I have when I join the server... but still no action. It doesnt send me to the survival server
did you setup a database and if not are you setting the permission with lpb?
how do i make the prefixes show up in chat?
this is all i have rn, but i've watched several tutorials, and nothing helps
and eversince i have LPC installed, i can't use the LP commands anymore
LuckPermsChat is not an official plugin, it just uses the LP name
and what do you mean you can't use LP commands? can you not type them or any errors?
also you need vault for chat stuff too
!chat
LuckPerms only acts as the source for prefixes / suffixes, it doesn't actually apply them. You need an appropriately configured chat/tablist formatting plugin for them to be displayed. If the values appear correctly when you run /lp user <user> info, LuckPerms is doing its job!
Is there a way to check what LP sends to a player when they execute /lp editor?
server consoles does not show it other than "[Messaging] Sending log with id:"
How do I change the message that shows to players that do not have permission
Giving them permission is one way
In seriousness, it isn't easily configurable (to my knowledge)
alright
Its MySQL database, and its pinging all servers connected to it properly. Let me disable luckperms and see if its a bungeecord/waterfall issue. (I'm using waterfall but it doesn't make a difference actually)
But in the console, I can send myself to the survival server properly
Using /send commad though...
Update: I disabled luckperms and still same..
I think I'm gonna start from scratch again...
!usage
Here's a guide to help users understand and use LuckPerms for the first time.
can u just give the specific command :/
nvm i got it
how do i change the color and show it with chat
i have essential x
!formatting
LuckPerms only acts as the source for prefixes / suffixes, it doesn't actually apply them. You need an appropriately configured chat/tablist formatting plugin for them to be displayed. If the values appear correctly when you run /lp user <user> info, LuckPerms is doing its job!
btw
what is the command again
!commands
Find all of the available LuckPerms commands on the wiki.
LuckPerms only acts as the source for prefixes / suffixes, it doesn't actually apply them. You need an appropriately configured chat/tablist formatting plugin for them to be displayed. If the values appear correctly when you run /lp user <user> info, LuckPerms is doing its job!
btw how do i setup tablist in stylizer
Move to #general and i'll help since it's not related to Luckperms
k
Hello, im very new in configuration things on luckperms
i tried to configure an Rankup System and Donorranks following with Tracks for each but the placeholder in essentials doesnt work
i did it like that
where can i find a list of my groups
/lp listgroups
ty
how do i remove a group?
nvm found it
how do i give certain groups/ranks and certain command permissions?
!commands
Find all of the available LuckPerms commands on the wiki.
user/grup commands, or use the /lp editor :)
hello i need some help
how i can find meta time in placeholderapi
i only see permission temp
hi i need help on how to give some OWNER in front of there name
Hi
can I update from old version to the latest one in 1.16.5?
or it only avalabile for 1.17?
if I could will there any changes config and all?
It will work fine
I download quite a few plugins, but when some people join server they can type commands for those plugins, how can I hide their commands
As long as they don't have permissions to use the commands it's fine.
It's not hard for players to find out what plugins are installed.
But they still can see the plugin , i want hide because it unprofessional 😂
then that is no up to plugins, lp doesnt hide commands
There are plugins out there to help you hide them but i don't honestly see the point.
Nuu tell me pls:)
it's not really unprofessional lol
ever been on hypixel?
or like... any good, well cared server
nothing wrong with ppl knowning the plugins, unless its shadyy stuff
but i doubt you have those so
I play on servers for the content, not the plugins.
Never have I joined a server, ran /plugin, and went "What losers, they're running plugins I know the name of"
Honestly I've found better results with servers where I know the plugins, because I'm already familiar with the interfaces/commands should i need to use any.
It's more that people are afraid people will copy them or because they know the plugins, they know how to hack the server.
Yeah I understand people ill-conceived notions about seeing plugins, still dumb
I know a million people that use windows
Time to hack

Having an issue which I simply can't figure out;
I recently hooked up my LuckPerms for use with a Velocity network. My groups seem to be syncing up just fine, but my prefixes aren't carrying over to my new server.
feel free to ping when replying
Just as a sanity check: Is there a chat formatting plugin on the new server?
EssentialsX chat on both yeah, I can't help but feel like I'm missing something on that front but I can't find any obvious issues.
Only other thing... Vault?

Happens when your internet grows legs and walks out
I m in multiple groups but one of my group is for limited time and I want to use this %luckperms_group_expiry_time%
but its not working
any solution
%luckperms_group_expiry_time_<group name>% is the actual placeholder. You forgot to add the group name on the end
there is 4 group which will expire after 30 days, people bough memberships
there is groups
Iron
gold
diamond
netherite
how can I ?
%luckperms_group_expiry_time_iron_gold_diamond_netherite%
can I do like this ?
Only 1 group name per placeholder
%luckperms_group_expiry_time_iron% %luckperms_group_expiry_time_gold% %luckperms_group_expiry_time_diamond%
So I have to go like this . .. ?
Yeah
its showing like 2week 15h 25m 25s
this is to long can I remove this minute and secound
and can I add like if 24hrs left then it will show
is there an example for user who use kotlin to use the api
you need to specify an address
fixed thanks
When I enable the MySQL, all my permissions got wiped.
!switch
If you wish to change your storage type (e.g. to YAML or MySQL) you may need to follow these instructions to ensure your groups and permissions are migrated to the new storage type.
do a proper export, switch to mysql and import
I had to disable the mysql, go to browser history and copy the old link again in order to restore everything
Firstly, run /luckperms export <file>
what do I put in <file>?
You cant just expect your msql to know that there is lp data already as it has nothing to do with the flatfile
the file namy can be anything, it is for you, and only for you to know what this file is
If you feel funny, name it 'assholeexport' xD
can I use data
?
nothing, figured it out. Thanks
is there a way to make it where a player cant have 2 of a certaim rank? like if u get one the other one gets taken away?
'parent set' instead of 'parent add' sets the rank and yeets any others the player has if you mean that
By all of them do you mean all the ones in that track or all the ones in general?
I mean all.
Is there a way to remove just the ones in a certain track?
o its parent setrack fixed!
@prisma hinge After the migration my user data got wiped out. I used to have like 16 users
I used to have 16 users
anyone can help me with this ?
not possible
i have weird question
im running bungee and the coresponsing servers on same machine
i need to set permissions from elsewhere
bungee does not have rcon, how could i do this? there is no api either...
pls ping
I mean the servers do have rcon, you just gotta enable it
have you ever heard of ssh?
you should definitely prefer that over rcon even lol
i can't ssh, im running it into docker, adding SSH would make it way complex
well, for now my fix is to run it on bare metal
later i'll code up a plugin or smth
I mean you don't have to use the bungee LP instance to do anything really
If you want to rcon to use LP you can rcon to one of the backend servers for that but I've heard it's so damn insecure I wouldn't really suggest it lmao
That sounds more like a setup design issue in general, far from being LuckPerms specific
Can someone help me?
!ask
Please ask the question you have. Don't ask to ask, or ask to DM someone. There are people here to help you, but we need to know what to help you with, so please just ask the question you want to in as much detail as possible!
After the migration my user data got wiped out. I used to have like 16 users
I used to have 16 users
16 users that have permissions/groups that differ from the default group?
and what did you migrate from?
How did you "migrate" the data?
run the command, stop the server
start it again and run the second command
I've tried to MySQL'
so, you're going from a single server, to a multi-server setup?
I have only 1 server
so you are migrating from a different permission plugin...?
doesnt look like it tho
then why are you doing this?
to better secure the data
I've had some issues in the past when the db file would get corrupted and I had to redo the perms
Why not just use /lp export to make backups?
!switch
If you wish to change your storage type (e.g. to YAML or MySQL) you may need to follow these instructions to ensure your groups and permissions are migrated to the new storage type.
basically this, remove the need to change storage method
I did this
`Switching datastores is easy.
Firstly, run /luckperms export <file>
Then, stop your server completely.
Edit your config file and change the storage type.
Now, start your server again. Let the new datastore initialise.
Then, run /luckperms import <file>
All of your data should have been moved to the new datastore.
`
who?
You
This is completely irrelevant to what you did
my bad
i ment this
But anyway, do you have both editor links you took the screenshots of?
Any changes made in the editor have to be applied using the /lp applyedits command - impossible unless the person with the link is also connected to the server and with the required in-game permissions to use LuckPerms commands. It's effectively just as safe to share an editor link as it would be to share a screenshot of your permissions or a pastebin of a configuration file. The editor doesn't contain any sensitive data (except perhaps player names).
Please, don't be. We're here to help, not steal your permissions setup. Additionally, permissions can be tested by players simply joining your server and seeing what they can do.
LuckPerms is a permissions plugin for Minecraft servers. It allows server admins to control what features players can use by creating groups and assigning permissions.
Everything looks right though. those members don't show up because they don't have permissions that are different from the default group.
i see
So I just run
/luckperms export <file>
stop the server and update mysql info
/luckperms import <file>
Can I ask an unrelated question about mysql?
Yeah users that are purely default don't get exported because there is nothing special about them to export/save (they shouldn't have gotten saved in the first place but who knows)
that was my thought too. could they have possibly had perms/groups that weren't default before, and just weren't removed?
well you're the expert here. 😔
LMAO
Anyone know how to add permissions to players in a script
in a script?
what kind of script?
How to setup luckperms
Can it help me to give acccess to mvtp command for specific world
!usage
Here's a guide to help users understand and use LuckPerms for the first time.
Why a script, why not use luckperms?
only if you tell it to
I'm wanting to do something like this:
command /openclans:
trigger:
open virtual chest inventory with size 5 named "&1&lClans" to player
format gui slot 10 of player with diamond sword named "&5Purple" with lore "&3>> &2Join the purple clan" to run:
add "essentials.purple" to permission of player
(this is with a script addon btw)
unless skript has an integration with LuckPerms, i don't think that's possible. maybe something to run a console command, and put the LP command in it?
#general Not relating to luckperms
Well, i have to specify the player with that
and if someone executes the command (and i make the console add it to the player) I wont know what the player's username will be
How to add a user to a group
!usage read through this.
Here's a guide to help users understand and use LuckPerms for the first time.
I had but there's something about parent in it
parent = group
I just done created a group named private
Then
I used this
lp group private permission set multiverse.access.private true
By this can peoples join private world who have the private group
okay.
so, whats the problem?
OH, you said "can people" not "people can"
uhm. if that's the permission for it, and they have the group private, yes.
That's what I am asking how to add them to a group
!usage
Here's a guide to help users understand and use LuckPerms for the first time.
its in there. like i said before.
See I watched It that is this
lp user Luck parent add private
But where shall I add name of the userr to whom I want to give this group
For example, to add myself to the admin group, I would run
lp user Luck parent add admin.
This command adds the userLuckto theadmingroup.
This command adds the user
Luckto theadmingroup
Basic LP usage is very straightforward. you just have to read.
okay, LUCKPERMS IS KILLING ME
Do he have must join the server at that time
I SPENT 4 HOURS TRYING JUST TO MAKE ME GET THE RANK
they have to have been on the server at least 1 time. you can use the UUID if not (i believe?)
AND STILL CANT DO IT
Ari3s_, read this.
Yeah? what's the exact command you ran.
And so this
How to get uuid
/lp creategroup Founder
From consoel?
/lp user ari3s_ add parent founder
https://namemc.com and put their name in.
or.. y'know... join the server and use the username instead lol
and I didn't get the chat role
that is a completely different story
re-read. carefully.
I am from pocket edition
you did what
Nope. i don't do dm support. if you need help, this is the best place.
pass.
F**K
this channel is here to help you. if you need help, describe your problem, and what you're confused on.
fucking chill mate
no one's gonna want to help while stressed out
are you talking about a prefix?
Chat prefix is ENTIRELY UNRELATED to parent groups
^
how do i do that
you can assign prefixes to groups, but it's not automatic.
Yea I don't know what you mean
!prefixes
You can set prefixes, suffixes and other meta data in LuckPerms for players and groups. Note that LuckPerms does not manage chat. You need to use another plugin to show prefixes/suffixes in chat.
I have already seen that
and what have you done
unlikely. you've probably only created unneeded confusion for yourself. it's simple stuff if you were just a little bit more patient.
you'll have to describe exactly what is it you did if you want us to help, or what about the wiki you don't understand
that's what i said.
it is simple yes
you literally just need a handful of plugins and another handful of commands
fucking idiot you cant explain what simple is
lmao.
come back when you've fixed that attitude
Yikes
back to this please
I dont even know what I did
Okay then it's whatever, start with a new group instead see if it can be done that way, you'll want to do a mixture of things you'll find in the usage guide + in the "Prefixes, Suffixes & Meta" page too
More specifically:
The things from the usage guide (https://luckperms.net/wiki/Usage):
Things from the "Prefixes, suffixes and meta" page (https://luckperms.net/wiki/Prefixes,-Suffixes-&-Meta):
How's this related to LP
Hey, ok so, i want my manager role to be able to give spesific ranks, not all ranks but specific. Is there a permission that gives them for example to give and take mod rank, because i only found a permission that gives them the possibility to give all ranks
!argumentbased
Fine tune exactly what users with permission to use LuckPerms can do.
But i dont understand, what is the permission to give a spesific rank to a player, i can't find it????
haha
I'm rather the type to get console access and fix all errors in there and then deop myself. Nobody will know i was there
Hi is there a placeholder to show how many players are online with a specific group, F.E.
I have 2 groups
VIP
VIP+
And I want to show on my scoreboard how many VIPS there are online. Is there a placeholder to show the amount?
delete the user data of the player
thx
players are not getting default group
even though I had a bunch of players join the server, only i am added as a user
because i added myself
this is bungee luckperms btw
wdym? default is default for a reason.
but those people are not given default
they are not even registered onto luckperms
are you talking about on the editor?
yes
They're not going to show up.
because anyone who doesnt have permissions/groups that are different from the default group, won't show up.
screenshot your /lp info
did you just, decide to change the command to lpb info ?
If you run a BungeeCord network, learn how to correctly setup LuckPerms on all server instances (including Bungee).
Syncing data between servers
then screenshot /lp info on the backends like i asked pls
I have no issues on the spigot side
it's just bungee permissions that i needed to give my players
if you're running bungee, you should have all of those sync'd to the same database so the groups are the same across all servers (proxy and backend)
so, are you manually giving every player their lp groups on all of your backend servers, and the lpb group on the proxy?
also, what permissions aren't working on your proxy?
i only wanted to give /hub /lobby perms
and it was lobby.use
/lpb group default permission check lobby.use <- run that, and ss the output of it
If they are not synced with a database, giving Bukkit permissions using /lpb is the same as doing nothing
unless it's a proxy plugin?
Right, i understand that.
but how do you know it's a bukkit perm?
I remember using LPB on another server and it worked fine for giving players perms
without syncing
lpb gives bungeecord (proxy) permissions lp gives backend (bukkit) permissions.
yeah
LPB does not magically send data to the rest of the network
and lobby.use is a bungee permission
how do other servers do it then?
each server has its own groups
and yet also contains bungee perms
Contexts
you can have per-server groups with contexts.
You can set a permission or group on a per-world/per-server basis, through what we call "contexts".
does bungeecord's config give bungee perms without the need for luckperms?
idk how bungee config is, always used velocity
hm okay
Yes, it can but it's stupid to manage. you have to restart your proxy every time you apply a user to a group, so unless you plan on giving all permissions, or kicking people from your network i wouldn't use it.
okay well i mean since i only need it for a few perms here and there, ill just use that
one in this case
Is there any way I can transfer permissions from one server to another? I am moving my server host from minehut to aternos. The minehut server is unable to start, but I can still access server files.
If you you're using the same storage config ('h2', 'yaml' or whatever) just copy the the entire LuckPerms directory to the new server. That's what i did and it worked.
can u dumb it down a bit
Are you on paper?
and your new one?
I belive the new one is on paper as well
so in your /plugins directory there is a folder called LuckPerms, just copy that entire folder over to the /plugins folder in your new server
then put the luckperms .jar in your plugins directory and you'll be good
you can't copy/download entire folders on minehut
well that's how you do it. if your host doesn't allow that then there's nothing you can do besides download each individual file and reupload
I don't need to copy all plugin data. I just need the permissions.
Well the permission data is in a .db file if you're using h2 or similar or in a folder call [type]-storage depending on your storage type. What's your storage type in your config file
Hello. I need help to make that when setting tag on "factions" set on the rest of the server! Someone help me pfv some tutorial something like that.
My server and bungeecord!
Hello, can somebody help me, i want to sync ranks from LuckPerms to PrisonRankSX so i can rankup with in-game money?
Please DM me for help
hey do I operate on spigot luckperms and bungeecord luckperms differently or do I connect the bungeecord perms to the spigot luckperms database?
!bungee
If you run a BungeeCord network, learn how to correctly setup LuckPerms on all server instances (including Bungee).
Syncing data between servers
I couldn't find the answer for my question
could you tell me
just wanna know should the bungee luckperms be connected to the spigot servers database or shld it be ran differently?
Hi. How can I block the display of command suggestions after typing / for a regular player who is not authorized to the rest of the commands
Him?
hey people where do I search for the RGB colours inside the command lp user user addprefix? 🤔 I made a small mistake and I don't want again write them..
the issue is here, where my name is with RGB starting and the ":" is missing..
Lp provides raw data, you need to use the format that your chat/tab plugin uses. You can edit those easily in the web editor :)
got it but how do I edit them now? I only know how to change the permission but these things not 😳
/lp editor, find the prefix and click it
yes, thanks and what can I do here with this issue? I would like to remove the : before nickname and the <> when I use essentialsx chat then it shows [owner]....
Hey so I've been noticing there is a huge gap when I do prefix stacking here is the config:
meta-formatting:
prefix:
format:
- "highest_on_track_staff"
- "highest_on_track_mvp"
- "highest_on_track_donor"
- "highest_on_track_course1"
- "highest_on_track_course2"
duplicates: first-only
start-spacer: ""
middle-spacer: " "
end-spacer: ""
I use chat manager and the config looks like this:
Default_Format: "%luckperms_prefix% &7%essentials_nickname%&9: &7{message}"
Image:
As you can see there is a sizeable space between Owner and MVP+
(The prefix after MVP is apart of the course2 track)
Double spaces usually happen when you added a space after the prefix in luckperms as well as using the middle spacer setting under meta-formatting.
I removed the space from the lp editor
:)
prefix.100.&d&l[&dOwner&d&l]
Should work
o.O
So I'm not quite sure why it's not working
Why?
Oh for other plugin configs that don't have a /reload command
ah. Well, is the giant gap normal now?
nope
It's still there and looks really odd
Maybe I should remove and add the prefix back
If you have edited/renamed the owner rank recently, it is possible you have the 'old' uncorrect owner rank on you. You can also check /lp user <yourname> info to see if the space is really gone. Since it's only between owner and mvp, either of those must be including a space
Ooo I'll have a look
But the old rank used to look like this (Owner) but I updated it to [Owner] So idk
Hmm it looks fine when the only rank I have is owner
But as soon as I add the other ranks it starts messing up
WAIT
my MVP rank had a space before it because it used to be a suffix lmao
I'm so stupid
:D
What command would I type if I want to allow all members to access multiverse portals?
Hello, Is it possible someone can help me setup MySQL on my server. (My server is running Windows Server 2019)
what about it? have you tried anything yet?
MariaDB is generally preferred over MySQL (it's based off of MySQL but better), you should probably start here with the download & install sections https://mariadb.com/kb/en/getting-installing-and-upgrading-mariadb/
but how do i host that on my widows server?
You... download it, and install it, as per the instructions in the sections linked above
First you need to get it installed
ok
@prisma hinge
Hey EnvoGod! Please don't tag helpful/staff members directly.
!Error
Here's a page with some common storage system errors.
Access denied as it says
Im having a problem of one prefix is multiplying 3 times. For an example its like
[Mod] mod [Mod] (playername)
How do I go about fixing this?
Hi, goodnight. I was wondering if there is a way o sync data from various servers in a single local H2 or SQLITE db?
Does the prefix appear correctly in /lp user <name> info
This is what it shows
Then the issue is with your chat plugin.
What chat plugin would you reccomend? Im currently using essentialschat. Could townychat cause problems maybe?
!moss ask here. They can help fix it
Make sure you are using EssentialsX and Vault for prefixes. For any other issues with Essentials, you should seek support in either #general or the official EssentialsX support Discord.
Ok thank you so much I aprreciate it
!lp info
!advanced
!api
!argumentbased
!ask
!bulkupdate
!bungee
!bungeecheck
!cauldron
!colours
!commandequivalents
!commands
!config
!context
!cookbook
!default
!downloads
!editor
!editorsafety
!errors
!essentials
!extensions
!extracontexts
!faq
!formatting
!helpchat
!inheritance
!install
!libsdir
!locale
!meta
!migration
!notworking
!nowildcard
!pasteit
!permissions
!placeholders
!selfhosting
!stacking
!storage
!suggestions
!switchstorage
!sync
!testingperms
!tracks
!translationprogress
!translations
!upgrade
!usage
!userinfo
!verbose
!version
!weight
!whyluckperms
!wiki
!notworking
We really would absolutely love to help you out! However, telling us that it isn't working wastes everyone's time. Please, just describe the issue you're having clearly and with as much detail as possible, and send any relevant screenshots of whatever problems you're having.
I messed up big time, accidentally deleted volumes that belong to database (with no backups) and I have now lost a year of work.
I still have lp editor open though, with my data...
Is there a way to export from web browser to, anything else?
Yikes. I've once tried to apply an editor session to a brand new server and it got f'ed up big time. Was curious if that works, and nop, it doesnt <.<
You'd need an export/import link or the file
Oefff
Well, you could still copy paste stuff if you have the editor open
sure sucks but better than missing things <.<
Jep... I guess so
I have like 56 ranks I'd have to copy
And a lot of players that'll be angry with me lol
Oh well, thanks a bunch anyways I just wanted to know if there was something I could do..
Welp, thats shit. If you have a store, perhaps you could relaunch purchase commands so that at least donors won't behead you lul
I lost that data too
No I don't use Tebex I made my own plugin
All the data for purchases is in the same docker volume that I deleted
So dumb xD
I'm actually not sure if i should laugh or be sad
I’m sure you can import from a live editor session
I tried that ANutley, with 500 users and 25 ranks into an empty server
only half of that was applied for whatever the hell reason
Ah, I will try that
So you say the code would equal that?
DUDE
I may be wrong but I assume that’s what it means
Will do haha
then ill commit self delete
Hehe
Next time I'm gonna make more backups for sure though
This is pretty savage to lose all your stuff with 1 command xD
Store them separate from the rest of your data if possible
Yeah I can't see how that could go wrong xD
Do you know for how long the link in editor will exist for?
Because I need time to setup a new mysql server and stuff
2 weeks from creation I believe
A week actually
Ye 1 week
i installed luckperms alongside nucleus, i did the 'getting started' guide giving me full access to luckperms, and i can't use any nucleus commands (no permission). is this a nucleus issue or a luckperms issue?
As soon as you install luckperms, nobody has any permissions, it is blank, so you now have to add perms using luckperms
thanks i think i got it set up
If ever you can't figure out what permission is missing, you can use verbose ^_^
!verbose
LuckPerms provides a verbose command to help you find out what permissions a command/plugin is checking.
!chat
LuckPerms only acts as the source for prefixes / suffixes, it doesn't actually apply them. You need an appropriately configured chat/tablist formatting plugin for them to be displayed. If the values appear correctly when you run /lp user <user> info, LuckPerms is doing its job!
how are you checking for permissions
My main command uses this
And for all the subcommands a player.haspermission check
But for settings I use a switch after the player.haspermission("dswap.settings")
Like this
hey guys, is there a way to sudo someone in to running a command they dont have permissions for.
im trying to make an item that makes a person run /jump, without having access to /jump
wave Emily.
Hiya
Well not exactly, or at least not with LP alone, I think there are some item plugins out there that let you do that (make a player run a command as op), I remember using one years ago but I don't recall which one it was (mmoitems?)
Because if everything is correct, these ^ will only show when checked
You can also try the verbose logger! It will show a stack trace when hovering over the permission check
!verbose
LuckPerms provides a verbose command to help you find out what permissions a command/plugin is checking.
VentureChat has /forceall, I think that's what your'e looking for
found it 
hi. anyone know how to remove the brackets without essentials? I only can use LP because ess does not remove me it... 1.17.1
What brackets, where?
<Przywódka Sebastian_Z_GTA:> d here
anyone can help me with this please ?
Luckperms has nothing to do with your chat. You need a chat plugin and in that said chat plugin, you will have to find the format (usually config.yml) and change it to your liking.
i need help since when ever i try to join my own server i keep saying this
(/127.0.0.1:64192) lost connection: [LP] A database error occurred whilst loading permissions data. Please try again later. If you are a server admin, please check the console for any errors
Ik
And ?????
grab your latest server log (found in logs/latest.log) and put it on https://paste.lucko.me/
Make sure to send the link to the logs to this channel.
Hm I'm not exactly sure what that's about, not much of a SQL person, but uh probably this will help?
https://luckperms.net/wiki/Storage-system-errors#mysql-ssl-errors
Also I see no reason why that would be caused particularly by just upgrading the JRE version, are you sure nothing else was changed? And by nothing else I literally mean nothing else
Could be your mysql bind address as well or timeout setting in it