#art-discussion
cunning kettle
What should I do to add a radio to this thing?
stoic blade
The antennae could be enough, or maybe a slightly darker colored rectangle along with it
eternal pasture
Oh guys it's great !
Are those linked to my "Scout tank" feed-back message ?
I guess we could just use the same style radio, with a higher antenna
cunning kettle
Are those linked to my "Scout tank" feed-back message ?
yes
cunning kettle
he would have pinged you XD
you were wrong
After I'm done with the Colonial version I'm going to make a warden one, what should I call that one?
It would be Devitt somthing something
Devitt Lookout Mk. II?
Devitt Outrider Mk. II?
or maybe just straight up Devitt Scout Mk. II?
bright jay
RIP
final forge
Devitt Pathfinder Mk. II maybe?
halcyon lantern
Oh so the driver is... wait, where?
Cause unless it has no turret basket or a halfbasket, the driver would be really squeezed
cunning kettle
Its based of a pz. ii
blissful heath
the Panzer II has the turret back a bit
cunning kettle
true
I think its a better vison port than this
also its a periscope in my eyes
the tank only supports a driver and a gunner/commander
bright jay
cool
halcyon lantern
Though it's not impossible tbh, stuarts had a really crampy hull but a shrunk basket helped.
keep in mind nobody sat in the exact middle of the tank so there was absolutely room for someone to sit in, just... not that much.
cunning kettle
progress report
cunning kettle
Would it be like, a 20mm auto cannon?
I think the devs wanted to add a 30mm cannon so idk
It's So CUTE❤️
sinful shuttle
It is
sinful shuttle
The warden scout looks like it has a spool of telephone or telegraph wire behind it, which I think is a neat feature, so it can lay down wire
rocky tiger
make Warden scout tonk smaller
cunning kettle
make Warden scout tonk smaller
as smol as it can go
cunning kettle
The warden scout looks like it has a spool of telephone or telegraph wire behind...
that's the fuel tank/engine the Devitt has it as well
desert forum
analog pike
They still look too similiar for me tbh.
cunning kettle
I still have to make the turret
stuck burrow
Concept that im trying to figure out.
warm furnace
so are there any other rules for posting art? (apart from given things like nsfw, inappropriate imagery, drugs ect) like having a clan name visible? cause i commissioned art and was considering sharing it here (for better or worse)
carmine jolt
so are there any other rules for posting art? (apart from given things like nsfw...
yeah go ahead
warm furnace
oh its got a clan name in it nvm
carmine jolt
hm? im not sure if there are rules against promotional art
warm furnace
well its not meant to be it was a more or less a thank you art for letting me be in it for so long
drowsy garnet
ehh
willow remnant
Looks very good
willow remnant
They're so cute...
cunning kettle
They are aren't they
night bronze
where can I adopt them?
cunning kettle
upvote them in creative highlight and hopefully they are added to the game
willow remnant
They're gonna crush ennemies under their tracks and dismember people with their guns but awwwww
eternal pasture
Oh my god man yours works are awesome !!!
cunning kettle
cunning kettle
Oh my god man yours works are awesome !!!
Thanks man
cunning kettle
Devitt Pathfinder Mk. II
eternal pasture
Oh that sounds nice, have you compared to other names ? Warden-like
cunning kettle
H3 "Sagaris"
eternal pasture
Can we propose some Warden names alike too ?
Sagaris seems very nice for the colonial one !
cunning kettle
Oh that sounds nice, have you compared to other names ? Warden-like
@final forge suggested it
willow remnant
Horchiss Mk.II
eternal pasture
The thing is that in the warden faction, it's their creator name included
Mulloy APC, Collins cannon, Balfour mortar...
Flood, Devit
cunning kettle
so what's a warden like name?
eternal pasture
Northern-Western European
cunning kettle
well the scout tank is a Devitt
willow remnant
The problem is that technically is not the same chassis
eternal pasture
It's not the same base isn't it ?
Kraneska & Pelekys has different name for example, while having the same base
willow remnant
rancid carbon
dont think so
rancid carbon
the devitt seems to be an improvement of the storm tank, which was 2 man turret
willow remnant
- Horchiss Mk. II
- Edvrad Mk.II
- Saoirse Mk. II
- Lynch Mk. II
eternal pasture
For me it shouldn't have the "Devitt" name as it's not the same size and therefore not the same chassis
I gave the feed-back speaking of a size between the AFT and the LT
daring ferry
this picture of the scout tank weirdly looks like a scaled down devitt
FT17-style tracks would have looked great on it
eternal pasture
It is, but it's for scale purpose anyway, the size it's not the same, therefore it's not the same name
Yes it would
untold jasper
Recommendations on tablets for drawing?
buoyant crest
@untold jasper first initial question: have you already used a drawing tablet before?
untold jasper
Nope
buoyant crest
Second: do you mean a device to assist your computer, or an actual tablet device to draw on itself
untold jasper
To assist with my computer. I'm looking for something that's not too costly but still good enough for amateur drawing
buoyant crest
I'll advice trying to use on of those small ones to get used to the concept of my hand motion matches the mouse
It is quite getting used to at first, as it is kinda learning to type without looking
usually, you can find one <50 euros
untold jasper
I'm used to drawing on paper, I guess that's a start
buoyant crest
I'm used to drawing on paper, I guess that's a start
Nice, being used to some drawing is a help 🙂
untold jasper
Also, what about the software? What are drawing tablets compatible with? I installed FireAlpaca some time ago
Also I know a bit about MS Paint from Windows XP
buoyant crest
In theory everything; you can draw in word if needed
untold jasper
Oh, so it will work with MS Paint from Windows XP?
buoyant crest
Yes, assuming you run it on a modern computer
untold jasper
Yeah, my computer's new
buoyant crest
cool
drawing tablets 'work' just like a mouse, except it can also register pressure (and depending on the model, angle, and height and all that fancy stuff)
you can also just use them as mouse
more ergonomic
FireAlpaca looks like a good program to start from
I'll advise to keep using what you are used to 🙂
untold jasper
Well, tablets have a pen thing to draw with, no? That's why I want one - drawing with a mouse is a pain... Hmm, so hooking one up to my computer would be as easy as with a mouse?
buoyant crest
Maybe I was not clear in my mouse reference 😅 I'll explain the mechanics:
drowsy garnet
graphic tablets can register much more than mouse :)
buoyant crest
A mouse is bascially a block with a sensor and a few buttons. By moving the mouse, the IR sensor will detect that you change its position. With a drawing tablet, it tracks the position of the pen relative to the tablet (although other options are possible), and instead of pressing a button, you press the pen
but it is functionally, from a computers view, the same type of device
a pen has all the functionallities of a mouse or trackpad, but also more 🙂
untold jasper
Oh, that's real interesting!
buoyant crest
In fact, it is so similar, I have played some foxhole using a drawing tablet
untold jasper
Amazing
buoyant crest
((Not advisable, btw))
buoyant crest
Now, for buying one, here is some advise: There are basically 3 general types of tablets: beginners, amateur and professional. The beginners are very simple in use and I really advice starting there. They usually look like [Picture] or similar. They go for prices below 60. They are not great quality, but usually by the time they break, you will have a god view of whether you want to size up or not. It is quite possible to get a cheap deal by getting them second hand (many people quit quite early on, so go to your local second-hand site). To be fair, there are not specific things you should be looking for except maybe having 2 buttons on the pen as well.
((the picture is not the specific model you should get, but gives a visual impression))
near folio
IS that a drawing mat? @buoyant crest
buoyant crest
Oh, btw, any brands you'd recommend?
The industry standard brands are Wacom, Intuos and Cintiq. But they also boost their prices a bit because of brand reckongition, so don't fall too deep in that ;). Usually doing a quick search on a brand gives a good feel if they are legit
buoyant crest
IS that a drawing mat? <@!284376339614531584>
Ye
Another kind of model that will work
I cannot recommend a device specifically, but if you want to check whether you are buying anything legit, you can DM me a model @untold jasper
untold jasper
Righty-o! Thank you!
cunning kettle
Time to vote for the name of the warden scout tank
- Horchiss Mk. II
- Edvrad Mk.II
warm furnace
so are there any other rules for posting art? (apart from given things like nsfw...
so i looked over the pins and i think i checked the rules my commission should go in creative - highlights - submissions
idle osprey
Edvard sounds too British. Horchiss sounds like Hochkis
brave heart
I like aelys
rancid carbon
@buoyant crest intuos is a wacom lol
rancid carbon
Recommendations on tablets for drawing?
I use one of the older intuos comic tablets, comes with 3 years of Clip studio paint. I would rather have something bigger, but for the cost and usability you cant beat it. Pen feels really nice aswell
buoyant crest
U fuck, I got confused 😂 😂 😂
bright jay
@rancid carbon do you know how to check that?
like how long you've got Clipstudio?
cuz I have no idea if mine will expire
rancid carbon
no clue lol, mine expired last christmas. The intuos gives you a 30% discount on it tho so I just bought it afterwards
rancid carbon
yea, its a great program
rancid carbon
@ adobe
This was all done with an intuos. The tablets size might feel limiting, but I found that I was the problem and not the tablet lol. The tablet can certainly preforms really well, and I'm not even close to being good enough to justify buying a new one
bright jay
my old stuff = fursonas
rancid carbon
holy shit
idle osprey
Devitt Bronzeye MKII is my suggestion @cunning kettle
rancid carbon
yeah
Im not sure what type of anatomy i believed in back then but I think it was something along the lines of free-form, as all art should be
bright jay
huehueheu
rancid carbon
2 years...
faint egret
tree art best art lol
rancid carbon
Last year, when I finally learned that using references is the correct way to learn art
never got around to drawing that hand
rancid carbon
yeah, im starting to get the hang of it but gloves help a ton
or maybe they dont because Im not actually practicing hands lmao
need to do some hand studies
ive always been too lazy to do studies, to a certain degree
prob why I havent improved much lmao
daring ferry
Well you normally have two of them at all times to study
daring ferry
It would get quite complicated to draw like that, wouldn't it?
eternal pasture
Warden Scout tank name (the colonial one as already been chosen) :
A - Aelys Mk. II
B - Saoirse Mk. II
C - Horchiss Mk. II
D - Lynch Mk. II
E - Edvrad Mk. II
cyan parrot
It would get quite complicated to draw like that, wouldn't it?
Just use your nose
eternal pasture
They are awesome, you did a great job! I'm happy to see that the feed-back proposition was appreciated that much :)
Can wait to see them rolling away everywhere
brave heart
carmine jolt
deserved
halcyon lantern
Smh imagine not using the circle selection tool and then the border selection tool.
...to make a circle.
hasty widget
I was going to try and learn gimp but it seems like a more complex version of illustrator lol
jolly fulcrum
Slightly better tool
Its Called Krita
and she is a great tool
same use as photoshop
but its also good for editing and drawing
untold jasper
I was going to try and learn gimp but it seems like a more complex version of il...
gimp is kinda annoying for me ngl
like even writing text in this thing is frustrating at times
rocky tiger
inspiration for my work in #foxhole-creative
carmine jolt
"let me see what you have"
"a knife!"
"NO!"
chrome badger
what kind of ?
like an icon
if you want a 3rd person photo I can only give you normal HT
glad wharf
rocky tiger
Look nice
chrome badger
well in that case i cant help you
bright jay
🤷♀️
cunning kettle
the scout tanks were me experimenting with a new track design so I'm going to remake my other tanks using this new method
Stay tuned
New
Old
stoic blade
WIP commission of a Veasi Legionary
cunning kettle
working on my projects is like a mad science experiment gone wrong
severe carbon
Foxhole in the Congo
cunning kettle
Light tank track compared to scout tank
cunning kettle
cunning kettle
dire plinth
@high ledge you do lots of sketches and I do enjoy seeing them. But don't try just to explore concepts theme-wise, well, ideas. Try also to explore new poses (by that, I mean full, half, quarter figures, like you did, but in much more postures). Like the riflemen you did, they aren't all that different from what I have seen so far, pose-wise. Try something, like a rifleman pointing towards a target. Try a croched, leaned, proned, try to do fantasy, where you have so many sword, halberd, spear, etc. poses.
It is really awesome and I am really not gonna say what you did so far isn't good. Yet, you are so close to improve and, to me, it looks like you are scared to go wild, to go to the next step. This is, of course, if you want to go beyond your current level, and y no means it's intended to undervalue or destructively critique your art.
Keep up the good work!
There is so much you can do with your current level. Try new mediums, too, I see you like sketching on paper, add some watercolours, or make some lineart to it (with a pen and ink or a liner).
There is also things that aren't poses, but are very helpful, like, studying hands; that is the only thing I can say it is something you have to improve on. I am in the same boat, with this, I do work a lot on hands. Other than that, you can do heads, explore different ways of drawing a head and etc. Really, it is in your habbit already, drawing a lot. Why not use that to go up? :D
In the end, you do you, but you have a talent that would be a shame to go to waste with just stuff you are comfortable with.
By the way, what paper size do you use? You can go to the next level, try doing them on A4, A3, 50 x 70cm, etc.
I can't stress enough that this is just my critique and I'd just love to see more finished drawings from you. It is a style that is anime but also not enough anime to make it your own and I do have a similar conceot in my style, too.
I am saying this to everyone. Go wild with your imagination and improve on what doesn't work. Don't just draw what you are comfortable with. Every drawing has to be a lesson, be it commissioned by someone or just your fancy little project.
dire plinth
@rancid carbon ah, for that, there is only one simple fix.
GO FUCKING DRAW TILL YOUR HANDS FALL OFF AND STICK THEM BACK INTO THE BONE SOCKETS AND DRAW SOME MORE. Love 🤍
@rancid carbon don't ghost ping me, you adorable piece of cookie.
rancid carbon
dyno got mad at meeeeeee
dire plinth
Or imma eat you.
rancid carbon
o
bright jay
draws mor dk
rancid carbon
Eehhhh
brittle haven
lmao
bright jay
uuuuuuuh
hasty widget
Bubbad replace your hands with auto quills like a true follower of the emperor
the more nibistew posts the more im surprised he hasnt lost his right to post pictures lol. top tier garbage everytime.
carmine jolt
a dedicated shitposter. ya gotta hand it to the king
hasty widget
@carmine jolt Idk man its like not even good shitpost material, like yeah it butchers a dead meme, yes its kicking a dead horse, yes hes using his 2 braincells but like it just hurts. in the same way history memes arent funny
brazen grove
oi lads
sand mango
eternal pasture
the scout tanks were me experimenting with a new track design so I'm going to re...
Yes this new size seems perfect for the scout tank ! 😄
high ledge
halcyon lantern
oh cool, scythe
severe carbon
More foxhole(ish) designs, a warden dispatch rider and a colonial commando. Both of these are set in the current game time
halcyon lantern
An advice from me is to make more wrinkles on the point of the trousers that meet the shoes. Less in the top of them.
Unless you're trying to go for the effect of padded winter trousers.
Else they'll look like winter pants
While more looser clothes generally tend to bunch around their bottom ends.
While the upper part might have wrinkles, these are generally longer and more vertical.
@severe carbon
severe carbon
Thanks, I’ll use that for my next few soldiers!
halcyon lantern
Here's also a reference for trousers with shorter shoes. they are also loose enough to bunch around at the bottom.
But other than that, good work and creativity!
severe carbon
I tried using the long creases on the soldier to the far right, and I think he came out decent
hasty widget
one comment, the pants are abit buffy, hthe reason the pants IRL are baggy is cause there bloused and a string is used to keep them just above the boot with a inner fabric of the pants tucked in the boot. this keeps dust out of the boots and pants well also give the soldier flexability
halcyon lantern
But you've also noticed well, loose, stiffer-material clothes (not like winter sweaters and such) have angular wrinkling
and not round one as you were doing on the left-centre guys
Same goes for sleeves.
But they usually don't have to rest on anything, so wrinkles don't come out that much if the arms are straight.
severe carbon
one comment, the pants are abit buffy, hthe reason the pants IRL are baggy is ca...
In addition to becoming a uniform detail enforced to look snappy and build discipline, though the practice is falling out of favor with modern militaries.
hasty widget
@severe carbon I mean its still a very useful feature that we have in modern combat uniforms. Personally I dont see it disappearing
severe carbon
Plenty of American army units have already ditched it in favor of Non-bloused boots, giving a more tactical/High speed look to soldiers
hasty widget
From personal experience the blousing is nice for bashing threw bushes
also if you have a link/pic of this unbloused unifrom style Ide be curious
What armies should ditch is the leg side pockets that will never be comfortable to put anything in
severe carbon
I’m trying to find a good picture, but I was on a guard base a little while ago, and none of them had their boots bloused. It could just be a guard thing, though
hoary geode
mystic robin
viscid haven
@high ledge We can all be friends here man, no need to throw shade on the Blueberries
Wow man, you've got to be about as Edgy as a Pizza Cutter
All edge and no point
bright jay
@hoary geode that line art is very nice 👌
viscid haven
@hoary geode Indeed it is! I'll be excited to see it finished
untold jasper
@high ledge where can I find the whole collection of this captivating story
spare pendant
🤔
cunning kettle
leaden carbon
dire plinth
@peak rover damn, that looks quite awesome, uhh, can you please make the hammer in the hand just for the sake of my OCD?
peak rover
@dire plinth
buoyant crest
Just place the handhammer vertical
drowsy garnet
what about rotating the hand as well smh
buoyant crest
Yeah, basically what I said lol
drowsy garnet
no couse like
peak rover
Trust me it doesn’t fit well
buoyant crest
that's the original version
That is vertical? And I mean the hand and hammer as a group; the original the two have different orientations
bright jay
smoller
drowsy garnet
yeah that's what i'm saying Morri
:O
but it's not gonna look good either way
so i wont put my effort into it
halcyon lantern
I believe the circle around the hand being centred to the middle of the escutcheon would be chill
Just as I used the square behind the emblem as a centre point on my warden flag redo.
tidal yarrow
its a tank that goes boom boom
cobalt tinsel
you just want a colonial version of the priest motorized howitzer
drowsy garnet
i wanted it to be cursed
daring ferry
a grenade proof TD
peak rover
We suggested this 2 days before they announced the current TD
bleak elk
I just realised how ugly Hatchet is.
drowsy garnet
Hatchet is beautifull
left wind
Could be worse tbf
halcyon lantern
phat
also only after texturising did I notice that the thing next to the barrels is a headlamp, and not the sight.
NOOOO
jolly fulcrum
wide
halcyon lantern
drowsy garnet
Amination?
halcyon lantern
nah just stupid posing
round moth
bright jay
nightmare colonial
pulsar whale
he's seen some shit
daring ferry
That's the foxhole materials in blender for you there
You can get some pretty cursed shit
ashen drum
halcyon lantern
So I've tried fixing the staff car a bit
Less rust, straight bumpers
straight headlight.
Straight luggage thingo, rear bumper too, and the exhaust pipe being in line
Also fixed the door handles and the side strip of metal.
and the blinkers
Though it will be hard editing its maps to make it fully smooth
wind night
the lightmap is making it look weird I think
halcyon lantern
I tried my best though
let me try comparing
Here's the two next to each other.
runic linden
Am I the only one who thinks it looks like it came out of 1960s East Germany rather than some country in the 40s?
restive solar
can't say, I'm not into cars
runic linden
Me neither, it just gives off that feel
daring ferry
reminds me of an old 2CV, these were made from 1948 to the 90's
runic linden
German car?
daring ferry
french car
restive solar
ew, french
daring ferry
with a bit of a traction avant mix (also citroen)
runic linden
The staff car also looks a bit like a computer mouse to me
daring ferry
i can't unsee it now, thanks 
runic linden
With pleasure 
carmine jolt
mouse car. what will it do
jolly fulcrum
french car
Renault 4CV
it reminds me to this car with a slightly different grill
daring ferry
Oh shit this is way closer
daring ferry
beware of strong forward facing wind if you don't wanna backflip
halcyon lantern
Good.
cunning kettle
remote lynx
halcyon lantern
Yes.
cunning kettle
jolly fulcrum
@halcyon lantern heres a project idea:
I hope you like the concept
rancid carbon
What
jolly fulcrum
you like it?
rancid carbon
Comboy sounds like an insult lmao
cyan parrot
Nah it's a good thing
dusk pulsar
Balls
carmine jolt
far left, fken dumbass holding the rifle wrong
final berry
art look good
sharp viper
Seiko
near folio
use foxhole hentai
ssssssssh
bright jay
WE WAT
carmine jolt
disregard
sharp viper
Uhhhh what?
viral lion
runic linden
So I've been fiddling around with some Foxhole-related skins for IL2. Issue is for some reason the texture for the P-47 cockpit seems to be mapped to the wing underside so I had to leave it like that unless i want to have a weird spotch of green on the underside
runic linden
Camo with country banners on the tail denoting different country air forces serving under the Colonial Flag, in this case, Veli. Also new roundel courtesy of @blissful heath
blissful heath
damn that's a nice roundel, you should thank whoever made it
with money
lots of money
rancid carbon
"There he is Claude. The CEO of racism."
"B-but that's Callahan..."
Thanks Kal 💛
remote lynx
That's not the only thing that's obvious to see
bright jay
hermmmmmmmm
dire plinth
@rancid carbon that guy is you? :o
Hey, I wanna have a drawing together with you, I wish fo see Morri in everybody's style, but heh... XD
halcyon lantern
I've drawn the helmet twice before, should be somewhere around here.
rancid carbon
<@284467413259517952> that guy is you? :o
Ye its my boyo back when he had 2 eyes
Ooo ye im down to draw morri
Although you would have to be ok with me butchering your character 😅
dire plinth
@rancid carbon if you don't butcher her too much, sure 😛
Really, if you want, you can, haha, but I wanna see her talking to your character. Think about me and how I am and draw a typical conversation between us, can't be that hard, or that bad, right?
rancid carbon
Oh i meant butcher as in poor drawing lol
Nah I doubt my character could best yours in combat
native dune
You could give it any discription and it would fit in that drawing
dire plinth
@rancid carbon do you know me as a war person? I am an extremely pacifist person, really.
hmm, how about you character being bribed to give me a SH? Or your character bribing me for a tank destroyer. How about your character asking me out? 😮
Yeah. That's it.
dire plinth
give her boots and make her more angry or smth,it looks like a theatre drama or smth
or you character either scared or make him not smile
looks cool, tho
damn, your character is pretty excited, lol 😐
hihi. Lewd.
rancid carbon
what
carmine jolt
:[
dire plinth
what
rancid carbon
what are you seeing aaaa
what do you mean lewd whatwhatwhat
now im paranoid lmao
dire plinth
@rancid carbon I just gave you a hint of my personality 😐
with a mix of impossibly stupid craziness.
dire plinth
these are cute!
flint leaf
yee, I forgot how much I enjoyed just doodling these little derp balls
runic linden
Basically if the Collies had a country somewhere out in the desert
flint leaf
so kraunia?
carmine jolt
no. devs would never make a flag similar to a real life counterpart
flint leaf
also that
runic linden
high ledge
nice Republic P-47
desert star
carmine jolt
sargeant, i can assure you with utmost confidence, there is absolutely nothing under that desk
high ledge
is that warden
feral prairie
high ledge
Best Collie Propaganda :
Tomboy Warden are Femboy Warden.
severe carbon
Tomboy warden best warden
high ledge
speaking of girls
ship girls
needs a lot of editing before any colour can be added
a
bright jay
👀
bright jay
storm tank
left wind
shitpost status
buoyant crest
is this the accession people keep talking about?
cunning kettle
yes
drowsy garnet
is this the accession people keep talking about?
xD
high pagoda
A little rushed, but I just wanted to share some ideas on alternative colonial capes, since I don't really love the one in the game.
halcyon lantern
hellyeah.
Yeah the current one serve practically no purpose since they just serve as a tall collar and covering one's shoulder.
carmine jolt
i think its just a cape, but in the model the cape was offset to the other side of the shoulder, idfk just a hunch
halcyon lantern
Nah it really is small. Goes to the back as much as it does to the front.
Still, I really like the one with the white stripe, second from the left. Far right one might be a good dress uniform with those golden buttons.
high pagoda
Unfortunately, I only thought of this after I finished drawing but the cape archers wear in the Banner Saga would be interesting as well
olive cove
I personally like the current ones, but your designs look pretty cool as well, though it would be neat to have some design on the default one in game though
remote lynx
uniforms when clapfoot
runic linden
Finished, now with cockpit and prop
bright jay
noice
runic linden
It's
F-cking
Done
rocky tiger
That's really great
near folio
**It's**
**F-cking**
**Done**
Absolutely stunning.
runic linden
https://youtu.be/EzC6hS1kEUM
There, on YT now
drowsy garnet
10/10
maybe exept for the camera moving in the last scene, which feels pretty werid to me
buoyant crest
@runic linden really nice job on that video, I can remember you working on it a while ago
drowsy garnet
oh yeah
making a chair let's go
found a really nice tutorial and i'm following it right now
if somebody wants to
daring ferry
oh, blender guru
did you do his donut tutorial?
its still mostly up to date, you might be able to pull it off after the chair
drowsy garnet
wait he said to do this one after the donut one
also no i didn't do the donut one
couse i'm already a blender pro anyway
daring ferry
couse i'm already a blender pro anyway
You gotta check cgmatter then
You'll also become a node pro
Or just lost because of the level of big brain
drowsy garnet
🤔
daring ferry
halcyon lantern
wowza
daring ferry
@glad portal isn't there a part of the text missing in the second one? 🤔
Great work tho
analog pike
Cute little panzer
bright jay
@high ledge ohohoho thats looking very nice
daring ferry
Cute little panzer
adorable, like a puppy!
willow remnant
Kill it !
pseudo fossil
Reminds me of the Metal Slug style, I love it
native dune
Reminds me of the Metal Slug style, *I love it*
yes.
pseudo fossil
Metal Slug version of Foxhole when pls??
carmine jolt
rawket lawnchair
pseudo fossil
macheen gun
native dune
Metal Slug version of Foxhole when pls??
when I can carry a pistol and 237 clips of ammo, without weight
for true experiece
buoyant crest
@high ledge Are these Iron Harvest figurines?
marsh pecan
runic linden
Not quite art but sorta just working on a Foxhole-based Campaign for IL2 just so I dont get bored on the holidays. This is one of the briefings for the first mission
and yeah because of the way the game works, theres also a lack of in-game cutscenes or story-based dialogue outside of the standart radio calls
rancid carbon
@dire plinth for uuuuu 💛
I hope I got morri at least kinda right 😅
rancid carbon
yay!
my thought was being that both our characters hail from native Caoivish clans, Morri would be mad at Koedem for fighting for the wardens haha
high ledge
<@456226577798135808> Are these Iron Harvest figurines?
No but yes
Their from scythe which is a boardgame based off the same paintings as iron harvest
high ledge
Yeah
remote lynx
Y'all got OCs and all I got was this lousy t-shirt 
bright jay
does dk count as oc? 🤔
remote lynx
Do you have a DK character that's involved with Foxhole, if so, yes
bright jay
wu
hollow badger
My first attempt at art, hope you like it.
bright jay
@hollow badger noice
buoyant crest
@hollow badger nice work! Share it in #foxhole-creative as well for the rest of the community
high pagoda
My first attempt at art, hope you like it.
I like the goggles
cunning kettle
My first attempt at art, hope you like it.
way better than I can draw, that's for sure
high ledge
art
dire plinth
@rancid carbon I wanna see it coloured and in community highlights now :3
@bright jay dk does not, though your regiment by itself does. In the end, you modified the 40k regiment to fit into Foxhole, just like I modified a witch to fit in it. I don't see why dk wouldn't have it's own place in the lore, as long as we stick with this world's rules.
Since Foxhole does have fantasy, legends, paganism, occult, etc. which means a witch can fit in this universe, might as well let anything in.
remote lynx
I actually like those
buoyant crest
I really like the art style of the latter
reminds me of something I have long forgotten
rancid carbon
<@284467413259517952> I wanna see it coloured and in community highlights now :3
But coloring is scarryyyy
buoyant crest
Want to learn how to quickly get base colours going?
you create a layer above your line art, then select whites spaces in your drawing you want a certain colour, go the selection tab and use "expand" to expand the selection by a few pixels (the tool might be in a different place in some programs), and then you just use paint bucket and voila, you have base colour.
When you have all your base colours done, you can create cliping masks on top of that for shadows and highlights
I do it when digicolouring my drawings
takes me less time than the drawing itself (if I don't account for the adjustments)
rancid carbon
Ye I think I have the basics down, I just suck at choosing colors and doing anything other than a base hahaaaaa
lilac scarab
rancid carbon
Ship*
cosmic bough
Im going to put that one into my inspiration folder if you dont mind
buoyant crest
Ye I think I have the basics down, I just suck at choosing colors and doing anyt...
For shadows, set some transparency and select a colour that is opposite on the colour wheel. If you have coloured lighting, (for example yellow), you correct for it slightly
high ledge
sure
I am trying to distinguish a sound from either a gas leak or a mosquito
so if you’ll excuse me.
high ledge
near folio
@bright jay I could get you them, what do you need?
daring ferry
Check sketchfab, the devs have uploaded it there it you want good angles
bright jay
@near folio I kinda need one from the rear
i checked sketchfab
musta missed it lmao
drowsy garnet
it's pretty simple and once you do it, you've got them all
altough some models will be in pieces
(and you gotta put textures manually)
daring ferry
you gotta put the textures and maps back together in a 3d software tho
you can do it if you learn the basics of stuff like blender
drowsy garnet
blender is cool
faint egret
yoinking that vid for my archive 😛
drowsy garnet
ah yes chose the texture for motorboat
wait oh god
i have to select just the right...
oh noo
bright jay
@drowsy garnet are u still alive?
drowsy garnet
nah i died
bright jay
can i keep ur skull?
drowsy garnet
well i personally dont need texture on those models so it's meh for me
drowsy garnet
can i keep ur skull?
you sick fuck
daring ferry
@drowsy garnet in case you want to texture it, here is the node setup https://cdn.discordapp.com/attachments/449284108527468578/784838471482736680/unknown.png
A is for color, N for normal and M for roughness, metalness and color tweaking
The "multiply" node is a mixRGB node iirc
Screenshot by Kalmoire
Don't forget to set your material to displacement and bump in the material settings in the texture menu on the right side
Aight hope this helps
drowsy forge
You also should change N and M texture to Non-Color interpolation so Blender will treat them as data images and not just RGB. And also since foxhole textures are made for UE4 (Which uses DirectX API) and Blender renders using OpenGL API you gotta invert the Y green channel of the normal map. This node setup is more correct way of doing it 🙂
high ledge
Twitchy morning coffee sketch. Combat engineering vehicle, tows howis and emplacements, and drags back disabled vehicles
bleak elk
It's long
eternal copper
necessarily
daring ferry
You also should change N and M texture to Non-Color interpolation so Blender wil...
Thanks a lot, I'll write that down
carmine jolt
oh GOD
near folio
Good luck brother.
drowsy garnet
the armature that comes with the models is pretty weird
some things dont seem to do anything
carmine jolt
you're venturing through dangerous lands, dude. god help you
drowsy garnet
like for an example this one
wtf
well i guess i'm gonna be making a new one, just for simplicty's sake
daring ferry
Aren't they dots usually? Mine are like two dots at the ends of a line
It's kinda weird on this one
drowsy garnet
drowsy garnet
Aren't they dots usually? Mine are like two dots at the ends of a line
dont ask me, i dont know shit about this :D
daring ferry
You will one day hopefully x)
drowsy garnet
hmm
this may be just simply to hard for me for now
but i have new plan
chop chop
i'm gonna have so many difrent objects, that's gonna be hell
onyx ore
what does your bone layout look like?
drowsy garnet
i gave up on doing bones
they told me to parent the bones with mesh
so i did
and it didnt work
probably doing something wrong..
so yeah, now i'm just gonna divide the main mesh into a couple objects and try to have some fun with that
it'll definetly be more work, but less thinking
onyx ore
fair nough
remote lynx
tbh I'd love low poly versions of the tanks
hatchet would be the most straight-forward
like these: https://static.wixstatic.com/media/dbafb3_d24023039cdd451a8258969bafb7a86e~mv2_d_3000_1800_s_2.jpg
drowsy garnet
hold on
daring ferry
Alright, let's go
daring ferry
Bruh
Parent it with empty weights
And then assign the vertex groups to the right bones
It'll be easier to work with and you will even be able to export it
I recommend the rigify addon since it has pretty much a human shape
Rigify will make a rig or you, and that rig can be turned into a simulation on or animation rig
drowsy garnet
no look
my problem is
i do the thing
i parrent it
with our without the weights
and it just aint working
after parrenting it
and it just doesnt react ;_;
maybe something about the model hold on lemme try on something simpler
ok yes it's something wrong with me
but i dont think i have much more time to waste for today
thanks for help :-) had tons of fun
OH RIGHT
this is the error that pops up when i try to do it
this probably should make sense to you
daring ferry
clear all parents, the order you select the armature and the model matters
try one way, if it doesn't work clear parent and try the other way
its mesh and then armature iirc
drowsy garnet
clear all parents, the order you select the armature and the model matters
BRUH
none of the tutorials said anything about what
daring ferry
yeah, rigging is complicated
its the reason i stopped working on the lowpoly colonial
:/
daring ferry
mechanical rigging is way easier than human rigging tho
drowsy garnet
welp gotta go study thanks for help again :)
daring ferry
np, ill try to figure out what causes your problems
daring ferry
Here is the texture setup template so people don't have to do it again each time. In your project, you can go into file ->Append, go to the nodetree folder of this file, select the node tree and click append. You will then be able to do add-> group anf add the node group in the shader tab.
cyan parrot
like these: https://static.wixstatic.com/media/dbafb3_d24023039cdd451a8258969baf...
That makes me think we need a tabletop type foxhole game xd
daring ferry
@remote lynx thoughts?
drowsy garnet
👀
daring ferry
ambient occlusion doing all of the work tbh
drowsy garnet
did you make it specificaly for it?
daring ferry
i did a simple node setup of the game MHT model
drowsy garnet
looks like a completly diffrent model :0
daring ferry
remote lynx
<@!154635167980322816> thoughts?
Looking good, but tbh if I tried to use that in my unity project it might kill performance when I spawn 200 of the buggers
daring ferry
yeah, the normal and material maps really sell it
i can always decimate the vertices of make a more low poly one
remote lynx
I was hoping to find a way to get a really simplistic model as in the foxhole art I posted. You can see in the picture the Hatchet is pretty much a carved block of wood with no detail work
daring ferry
bruh model is 27k faces total
remote lynx
considering I'm trying to find models with 500 or less...
daring ferry
aight, time for lowpoly modeling
wind night
remote lynx
the tank model I've started using as a stand in has... 1.5k vertices and 2.7k triangles
which is probably the best I can find
remote lynx
<:killjoyserr:456472345071321089>
:(
daring ferry
it can be improved, but it won't look as good
remote lynx
toy soldiers are a bitch to find free to use models for
@daring ferry the mortar carrier you made looks great tho
daring ferry
yeah
daring ferry
its just a texture replacement, it will be hella laggy in a game x)
remote lynx
ye
daring ferry
oh btw i got this lying around
remote lynx
this thing has a few more details than I'd need, but it works, mostly. Haven't tried spamming it yet.
Then again, you know how Clapfoot is against tank spam so even on a world map you'd probably never have more than 25 on the board at the same time. 
wind night
Unturned uses pretty generic low poly art
remote lynx
the ones with even less detail just straight up look like the tanks from that flash tank game
drowsy garnet
Then again, you know how Clapfoot is against tank spam so even on a world map yo...
is this a joke?
altough 25 even for 5 fronts isn't common, it is definetly a thing that happens
i guess you could group them up tho
since they usualy work together anyway(or at least they're supposed to)
and just change size of model depending on how many tanks there are
maybe in groups of 1-3
bright jay
how to draw folds in clothes
drowsy garnet
step 1: cover yourself in oil
daring ferry
Use the awesome blender cloth brush in the sculpting tab!
Great for getting quick and good looking folds in a mesh!
Reee use blender !
drowsy garnet
Great for getting quick and good looking folds in a mesh!
you sound like they pay you to say that :DDD
daring ferry
Nah, I'm just part of the blender cult now
runs away, angrily screaming at people not using the cloth brush to make 3d model clothing
daring ferry
Please use an HDRI for lighting ;-;
drowsy garnet
hdri?
drowsy garnet
well i checked some other tutorials, and one said to connect each bone to separate object
and it works perfectly
so i guess i could use that
daring ferry
Yeah, you can do that
It's the same as attaching them to vertex groups technically, except that you can have only one object as the mesh (in object mode, not edit mode) or multiple at the time
drowsy garnet
I'll check the vertex groups today..
brazen grove
blopck man
rocky tiger
AHHHH
now i have time for this
rare folio
She looks like she has killed 2 tanks already and is getting ready to kill a 3rd
Please keep her away from me
bright jay
@rocky tiger wheres your gasmask kriegsman 😆
rocky tiger
rocky tiger
this is no kriegsman
this is warden waifu, be prepare collie scum
daring ferry
she's either taking a sharp turn while running and using binos, or defying the laws of gravity
both are scary
bright jay
kicking something
daring ferry
oh wait
bright jay
O.O
daring ferry
foxhole hentai confirmed O.O
bright jay
already exists
daring ferry
oh no
rocky tiger
seem you want bigger picture of it
rocky tiger
bright jay
lmao
severe carbon
It’s already been done here
bright jay
im having fun time tonight
severe carbon
brazen grove
oh no
high ledge
oh yes
round moth
cunning kettle
How did you do in PE today?
round moth
oh yknow
cerulean anvil
First time drawing vehicles and guns.
Need input on perspective and relative size.
bright jay
noice
drowsy garnet
1 thing is that you probably dont want those tiny leg - skis things on the bottom of ATRs
hold on, can i just
near folio
First time drawing vehicles and guns.
Slap a 75mm on it so every time it fires it damn near flips itself.
cerulean anvil
Lmao
drowsy garnet
nooo
there's no luv in the game files that i downloaded
where is it
reee
i wanted to ruin Terrento's life by just making a 3d model before he finishes his drawing
drowsy garnet
yeah but i could take all the credit
bright jay
no krieg models e.e
willow remnant
75mm LUV when ?
stone pine
300mm then we’ll have a deal
drowsy garnet
@daring ferry initiating tommorow in T-15 minutes
cerulean anvil
Here's a better sketch.
carmine jolt
first thing i saw was mummy ahegao and my morning was ruined
rigid plaza
my day be so fine
then boom
native dune
first thing i saw was mummy ahegao and my morning was ruined
This Drawing makes my day better
dire plinth
@rancid carbon it does look well enough like morri.
rancid carbon
<@!284467413259517952> it does look well enough like morri.
Aaaa I should color
Finally done with finals
dire plinth
@rancid carbon show me the final work before colouring
drowsy garnet
first thing i saw was mummy ahegao and my morning was ruined
fuck i didn't see it untill seeing this messege and scrolling up
my day...
buoyant crest
first thing i saw was mummy ahegao and my morning was ruined
Same
rocky tiger
be happy
runic linden
Some colour pencils my sister bought for me because she thinks I draw too much in graylid
I doubt I’d ever use it though but I guess I can try
rocky tiger
restive solar
seem you want bigger picture of it
mark me down as scared and horny
bleak elk
I refuse, I shall be a grumpy old man scaring kids away from his porch
I already like that idea.
thorny pawn
simple edit but appropriate
bright jay
why.....
daring ferry
Aight, enough internet for today
buoyant crest
the way her hair doesnt interact with the body gives me the feel the head is in the far back and she has a really long neck which is positioned perpendicular to the horizontal and vertical axis
eternal copper
with such a surreal view of form you can kickstart a new form of cubism
buoyant crest
bold of you to assume I am capable to make any two coherent pieces
gloomy dove
if you take the neck away the head looks like its just floating on the shoulders
drowsy garnet
if you take the neck away the head looks like its just floating on the shoulders
no way!
gloomy dove
yes way!
potent ibex
Both way
cunning kettle
oh yes
daring ferry
you using a skin mod?
cunning kettle
yes
brazen grove
pow
drowsy garnet
The sholwave was so strong it blew their heads out
brazen grove
hahaha this is what i get for drawing small heads
drowsy garnet
They dont even have heads yet
brazen grove
like dots :P
buoyant crest
if you take the neck away the head looks like its just floating on the shoulders
if you take the neck away, the hair becomes the neck
restive solar
like dots :P
heads in DLC?
daring ferry
Goddamit, didn't do anything productive or art related today again :/
brazen grove
don't like drawing heads or faces in soldiers, when in thought. simple and brutal fighting comes to mind.
severe carbon
Felix from RvB
bright jay
Ahhh such an old show
cunning kettle
old but so great
cerulean anvil
I'm bored.
cerulean anvil
@rocky tiger Sorry in advance.
severe carbon
Highschool tomboy warden when
cyan parrot
first thing i saw was mummy ahegao and my morning was ruined
It should be a happy moment tho
olive cove
I have a dnd character that is actually kinda similar to Mummy's character in terms of look with the short hair and all, this is a commission I got of her recently (then turned into a token for roll20)
Just realized that
buoyant crest
Goddamit, didn't do anything productive or art related today again :/
You dont have to draw everyday. You will just exhaust yourself; sometimes you need a break, that goes for everything. So don't beat yerself about it
daring ferry
Oh I had no intent to draw x) It's just that lowpoly tank that I'm trying to do for tabletop gaming that I keep forgetting about
bleak elk
Drew this, is it "crispy" enough to be considered a meme?
buoyant crest
I dont even understand what this is supposed to be about
drowsy garnet
he destroys the shit out of arasaka in the virtual world, made by arasaka
(i assume)
carmine jolt
wait a fucking minute this is spoilers
drowsy garnet
idk what is this ticket thing
left wind
His brain, perhaps?