#hardware
1 messages · Page 26 of 1
they are pretty much a collection of outlet stores, which arent as price gouging as the rest because they deal in bulk and direct selling
most of their prices are even better than amazon with prime
figured out my mouse's erratic movement issue
for some reason extremely high dpi settings were added into the dynamic DPI change scale, prly some stupid Logitech GHub update lol. I was accidentally changing it and then changing it back without realizing when trying to sort it out
I read that as "mums erratic movement issue" 😭
Nothing can fix that one sadly
alzheimer's effects us in bad ways
dynamic dpi/mouse acceleration is one of mankinds' worst inventions and no you cannot change my mind
What about mouse smoothing 😛
What it's so good though look at what it's done for competitive gaming.
So I ran into a little wall w my build and miscalculated the case w my gpu and it’s cooler 😢 but assuming it’s not the end of the world I’m just gonna finish building as is and not close the lid turn it on and transfer to a bigger case at another date because I need it for some big renders. Not a big deal right ?
There are some adapters to fit the gpu vertically, they fit in 5 or 6 slots in the back, maybe worth a try
@frank glade I think the problem w space is my cpu cooler is jamming everything up 😫
Or do think these adapters you speak of may be compatible? Itd help so much if it was 🙏
Your cpu cooler is sticking out, and those gpu cables can prly not be bent enough safely, you prly need a new case
I wouldn’t wait too long, having no lid on means you can’t attain proper positive pressure so you’ll have a bit of an airflow issue ironically, and also there’ll be lots of dust coming in
Idk look up "vertical gpu brackets"
Bigger cases are meh
This is the way. I used a mITX case with a NH D15 for a while, but now it's a 280mm rad squeezed in there
I've seen HVAC systems that are smaller than the NH-D15 :P
Noctua will release NH-D15 Gen 2 soon 🤩
you use AIO?
then what?
its half of NH-D15 basically
is there flexible "heat tubes"? something like that picture but I want to be able to "route" them to specific location
I know I can use water cooling loop with soft tubes but it will cost too much
So with my current setup of a nh-d15 and the msi suprim x liquid and the case it’s in could I make it work w a vertical bracket or would I need a smaller cpu cooler like the nh-u12s? I need to figure this out I don’t want a bigger case those things are ridiculous more so than the size of my nh-d15 me thinks 😬
Could I go like 1 month till I swap to either new case or different arrangement with it open and be ok you think? I need to get it on and rolling for some bigger renders than my small setup can handle for a client
https://www.nox-xtreme.com/en/chassis/hummer-zx this is the current case plus I’ve got a z790 msi tomahawk mb and msi suprim liquid x and that nh-d15 and 2 48 gb ram sticks in the space need to Tetris stuff around if possible w out ordering a new case and all ur executable solutions are valued tremendously 🙏🙏🙏
Hummer ZX is in mid tower chassis format with multiple storage options and a full ventilation system.
I’ll stock up on air duster for now I guess
What dimensions width wise would be adequate ? I see this msi mag case that advertises it fits the gpu i have but it’s crazy taxed for what it is looking for something half or quarter the price
Careful with that too. When cleaning fans, hold them with your finger, don’t let the air spin them
Will it break the fan if I don’t hold it w a finger to clean ?
It’s good to know
You can mess up the bearings. Pretty sure I did that to one of my fans before I learned that
Got it thanks for letting me know
not only bearings, if the fan will spin very fast it will generate electricity and it can damage the board
some details about RTX 50 series "leaked"
it will probably be so huge that we will install MB in it instead of installing it on the MB
Hi, If yo uare working with Alembic cahes and Grooms (characters) what does unreal need to handle that ? GPU power ? Vram ?
both
groom is rendered on GPU but you'll still need CPU power for the physics (collision)
and alembic cache... no idea probably mostly CPU 🤷
I'd personally also swap the PSU
with which one
something non asus thats 850w is fine?
Nighthawk XR1000 WiFi 6 Gaming Router improves your internet connection by stabilizing ping, reducing lag spikes, and keeping you in the game with reliable wired and wireless connectivity for fast-paced gaming. WiFi 6 allows more devices to connect and stream simultaneously by efficiently packing ...
You guys see that insane deal?
Just thought I might mention it for anyone needing a upgrade
Or you know, plug Ethernet cable in and get the actual advertised speed
Wifi6 is old news already, and it’s not as great as they make it out to be
It's 46% off
just buy a microwave at this point
you have i9 13900/14900?
maybe you have this: https://www.radgametools.com/oodleintel.htm but before you try something wait for someone else to reply I dont know much...
RAD Game Tools' web page. RAD makes Bink
Video, the Telemetry Performance Visualization System, and Oodle Data Compression - all popular video game middleware.
i did notice my computer with a wifi6 card did get 2x the speed of my wifi 5 card laptop
on the same wifi, with the same distance
my computer with a wifi6 card
Desktop?
yeah
i did load a wifi6 card into an ancient gen 6 i5 laptop and got the same speeds as the desktop
The Wifi 6 card just has better hardware. I'm assuming it's using more spatial streams
what is the point of 14900KS? to bankrupt the owner?
"In one ... the i9-14900KS consumed 31 percent more power than the i9-14900K for a less than 1 percent performance gain" lmao
Soo you might need a separate 1000W PSU only for your Intel cpu
my next pc is going to have a real functional diesel exhaust stack attached to it. roooooolling cooooal
Hello everyone in this video I play video games on my gas powered gaming PC and it's a little hard to hear haha. Enter the giveaway for the Starfield one of a kind EPIC gaming PC here https://bit.ly/HomelessStarfield
CHAPTERS:
00:00 Can I win before I run out of gas?
01:00 Problem with previous vid
02:26 IS IT PRETTY LOUD?
04:00 Why tho?
...
that little toyan engine is wicked
but wait, its not that simple lol, because this CPU gets really hot fast, coolers cant handle 400W heat so it starts throttling and performance go down to the level of 14900K or less 🤦♂️
I spent like 2 hours thinking about who will buy this CPU, maybe only rich people who want more letters in CPU name...
can someone type wmic path win32_computersystemproduct get uuid in cmd for me
and show me what you get
and tell me what motherboard u have
And also just need your social security and your cc number
don't forget the location of your house key and approximate location of all family members
what's in it for me, asking for a friend
i just need the format tho
you cant even do anything with that number
im pretty sure
Are NVidia super cards good? I've been thinking about GPU upgrade for quite a while and can't decide between 4070 ti super, 4080 super and 7900 xtx.
I'm also considering buying cheaper card like 7800 xt for half a price of above cards and wait for rumored AMD cards that promise to be really cheap and efficient.
Depends on the card and your needs prly
rumored AMD cards will probably be "scalped", out of stock and overpriced...
Hi there, I'm planning to change my computer really soon, I'm currently doubtful about what CPU brand choose for UE & software development in a whole, same for the RAM, I don't know whether 32 or 64GB would be sufficient. (I have no budget limit btw, just want the fastest thing for development.)
i'd say amd ryzen and 64gb ram, gpu based on your primary focus (graphics = high spec, coding = med spec)
intel smart hybrid heaters are kinda joke rn when trying to 100% load them
which is the best between 64gb ram quad channels (4x 16GB) and dual channels (2x 32GB)
2x32, because you can bump it later to 4x32
you dont need best
5900 compiles engine in 25 minutes, 5950 about 20
i guess newer would be better
i'm satisfied with 5900
The website where I build the computer only sell ryzen 7000 and 8000 series :/
then 7900 or 7950 if you want that extra $ to burn
Alright, thanks
the dual channel is better because it gives you room to upgrade to 128 :>
You mean other cpus can’t handle quad ?
Ah right it’s pairs of 2
I doubt this person knows little about UE
I’ve seen such blasphemous posts before but as they say on Twitter, that was not “my truth”
i5 1250h and ryzen 5 7640hs, which best for unreal engine 5
Intel
I searching for ue5
second one has only 512gb drive, kinda small
do they support getting one more ram stick to get 32 ?
If you’re purposely buying a laptop for game dev, it’s already an uphill battle
i personally do want to get own powerful laptop for temporary workstation, since i'd have to travel quite a lot and carrying pc is not an option in postapocalyptic country
rent colocation space, put your workstation there, buy chromebook and work remote
to get access to proper internet speed i need to travel to russia
travel to dl unreal, travel back home, repeat
are you in germany, too?
in 20km from frontline
oh
i hope you got cloudbackup at least
considering that the situation sounds like you got to leave any time 😦
i dont have anything to backup, our office is gone (marauded), luckily all things were on encrypted veracrypt drive so at least wont get out
Is Starlink shut off there now?
afaik it does not connect, but in general marked as illegal
Cause politics?
Ig Elon said some stupid shit and Zelenskyy got mad at him?
why bother spending money on starlink when you could get 1gbps unlimited traffic wired connection for 10$/mo
Cause… it’s Russia?
It’s not dangerous to travel back and forth?
no
What about the voting at gunpoint stuff
fake, i'm laughing from the news
“In war, the first casualty is truth” - Call of Duty from an actual quote I can’t rmbr
I thought Starlink was given to Ukraine not Russia 🤔
In war, truth is the first casualty. It's a military maxim attributed to Aeschylus, the father of Greek tragedy.
It was, but he’s saying he’s in Ukraine. Didn’t say whether occupied side or not tho
probably in the occupied because I dont think it would be possible to just travel from UA to RU and then back
is he works at GSC game world? 🤔
@coarse hollow how u doing with the 3060 so far?
I have not really had any issues, but i also have not made huge populated cities or anything., sometimes I drop slightly below 30FPS in Editor, but that was running the Nvidia RTX branch with everything on @thick matrix
well im already happy when i can do large landscapes without crashing xD
you can alwys turn on DLSS if it gets slow
my gpu doesnt really support it xD
That shouldn't be much of an issue with the 12GB model 3060
im on a GTX 1650 S currently
Yeah, that will crap out on the basics in UE5, the 1650
so im looking to upgrade to a 3060
but on the bright side, i learned a lot about optimization xD
I was running a 1050 before the 3060, so night and day difference for me
but, i would say, if it comes down to speed vs VRAM in your card choices, go for the more VRAM
i paid more for my 1650 during covid than the 3060 costs now 🤡
Ouch!
yeah but usually SSD speed is the bottleneck these days xD
granted, without the rest of the machine keeping up, the video card is a moot point
I use my 1050 to run local Whisper or small LLMs now
really expensive to make a perfect systems these days
i will need at least 3000€
so i rather pay 300 for a patchwork upgrade xD
mine is not bad, i got it for about $1400 after everything was said and done. i9-9900K at 4.7GHZ, 64GB RAM, 12GB 3060, 800W PSU, case, 1TB NVME primary, 2TB NVME secondary drives
the speed of these drives is insane in some cases. 1.8TB per second. Of course, as usual, a bunch of small random files will bog them down
my system isnt too bad in general, just the GPU is crap xD
you are running nvme ssd, or ata ssd?
just ignore the pagefile using more than available lol
not sure actually
guess its nvme?
I don't think so, i am pretty sure that is SATA
ok, to be specific, i am not sure what the Core is, but i think that is sata Bus, not the hyper fast onboard bus that the m2 uses (forgive my terminology, i have not been a tech in a couple decades, and i do not talk computers that often
but, that drive is plenty fast. the new video card should be used to full capacity
I am not going to even try to explain it 🙂 best to just do a search instead of getting my broken info
ohh so its that new ones that go directly on the mobo?
indeed, you can get a 1TB for under $100, everyday now
i suppose the real question is, does you MB support it, and does that CPU/BUS have the capacity to run it, and your new video card at full speed
yeah thats the thing, i probably need a new mobo for that
well, you have basically the fastest SATA available, so i would not worry at this point, the new video card will make it feel like a new machine
yeah im quite happy with my SATA SSD for now, just the GPU needs an upgrade
but SATA can become a bottleneck in more modern systems
mine is ancient
yeah i know many people who still use HDD lol
but thats kinda an unacceptable thing in 2024 imo
except maybe for backup and long term storage
but yeah, i guess it also needs to be tested with
Hi guys. Laura sent me over here. I'm gona try to establish as much as I can. Firstly this photo is my only info known on my pc before I bought it. Since then I have removed the 2 ram sticks and replaced them with 4 8 gig ddr4 sticks. I also introduced a wd black 2tb ssd. I have my os on a nearly empty hdd that came with the pc. And everything else all my games and files are on the ssd. Other than that I havnt done much to the pc. Following this post I will add 2 photos of items I think may benefit my experience in ue5. Please feel free to confirm or deny or criticize my choices. I'm noob af no hard feelings here just absorbing the environment.
I've picked these parts after viewing the ue5 minimum requirements. I have found the cheapest I could find but I am willing to stretch my budget
I'm not even shure if all those parts work with my mb
I have seen the i5
Well given my current pc shit pile. What would you guys reccomend given the info known on my pos
Ok I'll go check them. I'd say I'm willing to blow about 1000$
I'm fine with used.
The gpu is a 1650 lol I need atleast a 2080 super for ue5
Oh
Hi there following your advices days ago I built this config, is there anything you would change ? (there's no GPU as I will buy it on another website.)
that's also what I was thinking about the cooler, do you have one to recommend me please ?
They are kinda the same price, there's like 30€ of difference between the NH and the cooler master I choose 🤔
Yeah true. :/
Those are the only one available on the website
So I guess I'll go for a NH U12A
Nah... that's just the prices in France 😐
like the NH U12A is the same price on amazon etc, it's just how it is here 😄
Oh really ?
Right, I'll see then
Talking about the power supply, is 850W good ?
forgot to precise, the gpu will be a 4080 Super, so I don't know if it consume a lot
yeah sounds good for me, i'll buy all of this now, thanks for the help!
because of inflated GPU prices, NVIDIA RTX A5000 now cost almost the same as RTX 4090, will A5000 be better choice for UE5 development?
Rtx a5000 is last gen, maybe rtx 5000 ada instead?
almost same price was for PNY RTX A5000 24G VCNRTXA5000-PB
is there preferred pc building/parts selecting web site? such as pcpartpicker.com
i think a 3090 is better than a A5000 for UE
hey yall
i was thinking about jumping my ryzen 5 3600 to a ryzen 9 5900x
and going from 16 to 32gb ram
any drawbacks to this?
running meta humans for some portfolio work before GDC and its running me up the wall 😀
Case:
Antec NX291 ATX Mid-Tower Gaming Case 4 Fan 3 120M ARGB 1 120M Normal
Power Supply:
Antec Atom B650 650W 80 Plus Bonze Certified Power Supply
Motherboard:
MSI B550M PRO-VDH WiFi ProSeries Motherboard (AMD AM4, DDR4, PCIe 4.0, SATA 6Gb/s, M.2, USB 3.2 Gen 1, Wi-Fi, D-SUB/HDMI/DP, Micro-ATX)
Processor:
AMD Ryzen 5 5600 6-Core, 12-Thread Unlocked Desktop Processor with Wraith Stealth Cooler
Graphics card:
MSI Gaming GeForce RTX 3060 12GB 15 Gbps GDRR6 192-Bit HDMI/DP PCIe 4 Torx Twin Fan Ampere OC Graphics Card
Storage:
Crucial P3 Plus 1TB PCIe Gen4 3D NAND NVMe M.2 SSD, up to 5000MB/s - CT1000P3PSSD8
Ram:
Silicon Power Value Gaming DDR4 RAM 32GB (2x16GB) 3200MHz (PC4 25600) 288-pin CL16 1.35V UDIMM Desktop Memory Module with Heatsink Grey SP032GXLZU320BDAJ7
Monitor:
ViewSonic Omni VX2428 24 Inch Gaming Monitor 180hz 0.5ms 1080p IPS with FreeSync Premium, Frameless, HDMI, and DisplayPort, Black
Keyboard:
Havit KB489L TKL Mechanical Keyboard With 87 Keys Led Rainbow Backlit Black Red Switch
Mouse:
Xigmatek G1 Lighting Wired RGB Gaming Mouse 6400Dpi
Headphones:
Havti H2022U Gaming Headphones USB 7.1
Mouse Pad:
Havit HV-MP861 Gaming Mousepad 7003003mm
This is my Pc. Is it good for making survival game (SmartPoly course) on Unreal Engine 5.4?
the course yes, a full game 🤷
you will probably need better Mousepad...
yea, its pretty thick with 7.003km
thoughts?
Yes, you already want 64GB RAM for a 3600 ideally.
It's pretty much necessary for the 5900x, especially in cpp land.
Other than that you may run into bios issues. They're easily fixable though (as long as you have a stable power source)
okay, so 64gb and the 5900x then?
😐
😐
what is the point of telling us what mouse pad you have? or monitor etc?
it's very important
it's like asking for the gas mileage of a RED Volkswagen Golf 1.9TDI
~5200$ before tax 🥲 😰 I dont have that much money lol (and never will)
Better buy 5950x.
Prices dropping
Be unstoppable with the unprecedented speed of the world’s best desktop processors. AMD Ryzen™ 5000 Series processors deliver the ultimate in high performance, whether you’re playing the latest games, designing the next skyscraper or crunching scientific data. With AMD Ryzen™, you’re always in th...
For this price it's a steal
Just suggesting if he isn't in most people group
It is a message with all the pieces and I sent it without editing 🙂
https://www.extremetech.com/computing/intel-core-i9-14900ks-is-already-breaking-records-overclocked-to-91ghz 🤯 for all the folks worried about cpus over heating can always opt for liquid helium at 50$ a liter 😬🥶
As expected, Intel's highest-clocked chip ever is already setting world records even though it's just one day old.
I dont think you can buy liquid helium as private customer 🥲
He identifies as business customer.
do cpu and ram affect file transfering speed? will it be slower while I play a videogame?
Having said that, games also need to use the drive to read and write, so that could very well slow it down
Unless ofc it’s on a diff drive
technically getting biz status is like $300-600 usd in most states dunno about foreign costs but LLC's are pretty cheap
My build has found a new home in a Corsair 4000d ❤️🏡
All it needed was about 30 mm width to fit the tubes
glad you picked a case over a riser card
Yea I was a little torn but I don’t think the same case woulda fit the vertical gpu mount
riser cards suck
there's a reason that the best populated PCIex slot is close to the CPU on the mainboard... (and it's not only because it's easier to route on the PCB :D)
Gonna download beta 5.4 and mess w project avalanche beta
I almost did some contract work for the avalanche team im curious to see what all the hype is about
Question does anyone use rdp or other remote clients to remote into there machine ? I am considering doing so and running some tests so I can have my main rig in the living room and can remote in via my old 2015 mbp with 2 other screens attached. I’m now just trying to figure out how to set it up for out of network remoting
This way I can plug it into Ethernet direct. Frame rate kinda sux for anything game related but most everything else is gravy.
gotta love that weird cabble management thing in the 4000d
there are faster alternatives than RDP
Splashtop or parsec ?? Any others ? I have an issue with setting up parsec currently
The one thing I like about rdp is it recognizes all my screens but likely I just need to dial in a different one
riser card has noticeable performance decrease?
if you are lucky they don't affect it, but the chances are high
also interference from other components can happen
I wanted to use Lian Li card bracket that they sell for o11 (if I could afford new PC)
Lian Li is the GOAT
🥰
$100 in my country. $50 if you do it yourself
nice
how much is the required minimum to be paid to maintain LLC if there's zero income?
idk your country but in the us its just file the taxes with the fact you made no income
I’m Ganna make a really powerful build soon pretty excited fr
I am using Parsec for that. My work PC is in a separate building and I connect to it via Parsec when I am working in our house. Working really well, although for multi monitor setup paid version is necessary as far as I know (I dont have it).
PC is connected to gigabit lan.
went with the 5900x
that's not bad
My dude. Amazing build, your tubes have a lot of climb though. Do whatever you can to make it so it is not taller than the entry point to the radiator.
Am I more better like this ?
yes
Thank you @cinder tiger !!!
Already performing better lol
Was wondering why my gpu temp was high for no reason just starting up
Which fans ?
Ahh yes that one should be pointed toward the other exhaust fans
?
I think they’re blowing out no?
They’re blowing out
Just double checked
It’s true hmm
Guess I’ll have to keep this in mind
I wonder if I can get a dust filter to go over the triangle hole intake fan in the back to cut down on the dust
hey yall
i just won a msi 2080ti, i currently have a 2070 super...is this a solid upgrade for UE5 work?
the vram in the super is 8gb, while the vram in the 2080ti is 11gb..this is good right?
The Nvidia 30'S series could support DLSS 3 if Nvidia wanted?
🤷♂️ even if it could, they want to sell new cards
You definitely want a dust filter on your intake fans
and a slightly positive internal air pressure on your case overall (so air blows out the cracks and not in)
Ideally you want it to blow out the exhaust fans not the cracks hence the slightly part
I suppose only a sata ssd would be feasible in that machine
would a ssd to pci not work?
There are pci-e m2 adapters, but I dont know if there is pci adapters at all
and even if there are, i think pci performance is worse than sata
Although there are pci-e 1x there
It could be possible to find an adapter there with some cable, dunno
which is, on this board, probably pciex 2.0? so we are down to sata speed again
get an SATA one, it's not like it would get useless if you ever buy a new PC
I would go with sata ssd
okay ty
and compared to an HDD it's still a huge difference and worth to upgrade
yeah im having issues with loading times and texture loading so ig its my hard drive but idk bc my hole pc is bad
what cpu is that even?
i5-2400 but was thinking of upgrading that soon to
Oh
cpu - i5-2400 gpu - gtx 970 ram - 16gb ddr3
You use unreal on that?
i use unreal on something with a faster cpu much slower gpu
Fair I was going to say how well does it run on the 2400
6 core cpu with igpu
dual a6000
they whisper compared to my 4090 workstation
4090 needs 50% more wattage and has triple the fans
Our RTX 6000 Ada cards use like 300-350W compared to my 4090 using 420 ish and at the same time faster than the 6000 card at the same professional workload, only thing really going for it is the memory
and sync ofc
heads up Nvidia 551.86 appears to be utter trash, causing massive perf issues with games like Horizon, Pacific Drive, Helldivers 2, etc.
hm I'm on that one, upgraded a couple of days ago
Haven't noticed anything

I installed, and had 11fps on Helldivers after a reboot
damn wtf
Rolled back to 551.76 and it’s fine again
wonder if it's specific gpus
Maybe, I’m on an old 2060 but I found a thread on their forums where many with newer cards too are having issues with it
weird, yeah I haven't noticed anything myself
Just what HD2 needs
Yay more hd2 issues 😦
The long awaited "We can't hotfix our live service so wait for patch" patch is here lol
Woo!
Is that a rackmounted case?
it's a custom silverdraft case
channel Moore's Law is Dead suggests a new flagship GeForce RTX 5090 could be up to 70 percent faster than the current RTX 4090.
with a likely end of 2024 launch
GPU that will consume more than 1000W probably, they will have to start making dual PSU cases...
stepping into age of double psu cases? one dedicated for cpu one for gpu
with massive radiator to disperse the heat
winters wont be as cold as before
What do you think of this PC build? The numbers are the serial no.
Hey guys, I have a gtx 1650 and I'm sure I cannot run ue5 lumen in it. But.... I can and would want to get a Virtual Machine to run UE5. I know some companies who offers VMs like Vagon, Azure, Google, Virtual Box etc. I want to know which one would be cost effective and would run ue5 without complains? I have a lot of questions regarding this so if someone can DM me and help me out, i'd really appreciate it..
dont waste your time helping people if they dont respect you enough to at least rotate the picture or retake it...
Oh man that's actually a good idea to get someone to download an infected image, to rotate on their side
better if you use a PDF, boomers will be stuck figuring it out for hours while your hacking is in progress
Thoughts on this build I have a budget of 2k so I have a bit extra I can spend lmk what I should improve (one thing I already have a really good power supply I’m using on my pc it’s a 850 watt Corsair psu that I’m going to transfer to This new one when it’s built) https://pcpartpicker.com/list/nrp2GP (note I might have screwed something up cuz I’m dumb)
Part List - AMD Ryzen 7 7800X3D, GeForce RTX 4070 Ti, NZXT H9 Flow ATX Mid Tower
but if 1 big ssd will fail all data will be lost
will my 12700k with 64gb ram fit all this? no clue what SLAT is
epic
Ok I should have enough in the budget for this
I’m not gonna go with them because I have had a bad experience with them in the past I hold nothing against them tho
Rip
I would have gone with 7900xtx but honestly I might it’s 50/50 (just not sure atm cuz there are trade offs between the two)
Mhm
Pretty good price too
Not the 4090
https://pcpartpicker.com/list/bnL9YN I changed ram and storage now I think it looks good I decided on having two instead of one big ssd
Part List - AMD Ryzen 7 7800X3D, GeForce RTX 4070 Ti, NZXT H9 Flow ATX Mid Tower
If there’s anything you think I should change lmk but I think this build would be really good
Alr
Not sure I don’t think it should I didn’t see anything abt it going slower I decided I was going to switch to 7900xtx and give amd another chance
If you see smth lmk but I pretty sure it can handle it
Yea I’ll think abt that too
You mean Nvidia ?
yes, Nvidia GeForce RTX 4090
but there are rumors that RTX 5000 series will be released by the end of the year, if the year will not end early...
I am pretty sure 5000 series was created at the same time when they made the 4000 series but kept it secret to sell us "4000 refresh"
Like…end of the world, or how would it end early ? 😀
That’s a lessons lots of us learned
Wow my dad has had a great experience with a laptop he bought from them for a schoool thingy
I have stuck with asrock for my motherboards because they are usually amazing and never let me down
I am currently using a build I got when I was 10 I paid like 1k for it 16 gigs of ram 1660 super intel i7 9400f or smth and the asrock motherboard shit haven’t let me down for four whole years it stills performs great
But it’s not good for unity
Oops
Wait
LOL
Dang
Yea I didn’t factory reset that pc for at least a year and I was constantly complaining about its bad performance but after the reset I have zero problems now
Holy
Anyways imma go play siege noice talk
Rainbow six siege?
I’m used to calling it siege around my friends cuz we all know what it means mb
Just wondering what are ur current specs
Ok that's really concerning
Makes me wonder if there really is some more widespread issue with ddr5
Yeah, (modern) asrock is my go to for MBs, never had issues with their stuff
Oof
Time to unsubscribe from that friend 😀
So what do you do if a BIOS update makes it unbootable, is the whole mobo bricked ?
Nothing is bricked if you have an angry enough soldering iron.
pretty much every modern board has dual bios
or flashback from usb support
which is basically using a smol mini firmware to flash the actual bios
their wifi sucks
x370 taicihi, wifi no bueno
also had major issues getting the ram up to speed, but i guess that's what you get for being an 'early adopter'
first gen ryzen
Part List - Intel Core i9-14900K, GeForce RTX 4090, NZXT H9 Flow ATX Mid Tower
anything over or undercooked here?
PSU headroom for doubling ram, adding drives, adding another 4090
another 4090?
I care alot more about 'note' C rather than 'warning' A though
For model training
i dont think a second gpu is going to do anything but vaporise your rig
wattage should be fine, mobos got a slot + 1, @x4 doesnt matter for the use case
like vaporize tensors to their ethereal form? thats the plan 😛
i mean turn the computer to a lump of silicon
oh like heat production?
that is a lot of watts
I'll do custom venting if it comes to that
not down with sticking water cooling in a rig worth this much lol
you would need a huge custom tower and MB to get enough space
tower is on the list
im talking FULL TOWER
unless I eyed the specs wrong here
physical space between mounts is big too since most cooling is done via radiation, and all radiation follows the inverse square law, the closer sources are, the hotter the air around them is
wait @iron zenith dont you have a 4090 in a mini case?
+1 was reference the gap on the PCI
why would I want a founder over a manufacture OC?
i cant find it for less from reputable buyer atm
I don't have time to min max the silicon lottery lol
that gigabyte might be too honky though, the fans almost look mounted to the shroud
you do have that fitting in a mini atx case though?
got dam
ill just get a PCI expansion chord
and then not even worry about the leverage and mount it wherever lol
lol, I think you might be hacking together boards at that point... and using a m variant gpu chip haha
alright so double check sizes?
everything else good to go
laura is there actually any bonus from dual 4090's? i thought there would be some issues with running them like that
well you can't run them for games unless the developers added/enabled it in dx12 and vulkan, I think its easier to turn on with vulkan
but by the time nvidia dropped SLI, the cuda drivers were supporting multigpu to my recollection
without the new SLI band, whatever its called
they have to use a shared memory buffer though
or partially shared, nvidia magic
I am not getting two 4090's for gaming to be clear lmao
I would'nt even get one
i thought only the quadros were designed to be connected
everything with tensor cores has em
even 3080s and 90s I believe, you just have to remove the shroud on most
i have a 3060 and im pretty sure there isnt a port for it. unless its better hidden than it should be
dont think the 3060 does
but at that point its not really cost effective to double up GPUs
really only makes sense with the 3090 and 4090 currently, and for one use case lol
NVLink**
that was derpin me out
still thinking that 1 4090 is going to be enough, pretty sure 48gb vram would be beyond overkill
for what 😛 ?
for anything really
the difference between 24 and 48 for me is the difference between running 5 and 10 siblings per genetic cycle
its more than double the effective cost per compute since I need mo smaples
I unironically
might get 3
lmao
my 3060 makes my office like 8C warmer than the rest of the house while playing RDR2... which is why im adding special ducting to cool it in the suite im building on my dads property
(one for a seperate rig)
bringing back childhood memories
my 3080ti (evga the short hardly cooled one) dumps out wayyy to much heat, im looking to get a 4070ti with way less wattage
I live in canada praries, basement right next to the window, I have a vent I can hook up if I want lol
my idles are 30c and 32c bb
it is legit very nice
once i get to a new place i might look into a specific vent too
had a swampy 'office' as a kid lol
XD
old house, not AC
XD
but yeah like, 1kw consistent draw, thats no joke of heat production lol
very expensive heater in the winter
oh no the heater broke! dont' worry, i have my pc!
😂
Well unfortunately I can't afford the squat rack jensen unveiled, so this'll ahve to do
boots up crysis
Don't get vram jealousy now Laura! 😛
hook it up, crank that sucker along with a bench mark, and toasty room
not set in stone yet**
Also to be clear @plush turret I am only paying partial out of pocket
like I said, if it was for gaming, I'm fine with my 1080ti lol
oh it fuckng cranks
but yeah my house im building has most of its cooling and return focused around my office space, with a 16 cubic foot per minute max flow
There is no reason any modern title shouldnt clear 60fps at 1080p on it
it is the king of 1080p
1080p on a 1080ti "It's in the name!"
PC's are good winter heaters, if it gets cold haha
I leave the window open when training all night in summer
its north texas it can and has recently gotten to -4F
and leave it still... partially open during the winters lol
yeah that always sketches me the fuck out
its really dry here so -30 doesnt really scare me
and its not like the PC is right by the window
but anything getting close to 0 at high humidity
lost a game boy to condensation when I was a kind ....
.... and then it came back to life the next day 😛
I don't think a desktop PC would though
its like perpetual 40% humidity here
thats making me get swampy just thinking about
Should be 4090 find out day tomorrow
is a 3060 12gb good enough of an upgrade over a 1070ti to be worth the price of upgrade?
It is still the cheapest 12GB card, and the 1070ti is old.
Approximately how many times performance difference 1060 3GB vs 4070 Super?
almost triple in passmark https://www.videocardbenchmark.net/compare/4973vs3566/GeForce-RTX-4070-SUPER-vs-GeForce-GTX-1060-3GB
Day and night
very helpful
I am just saying the difference is chaotic and it's worth the upgrade
I moved my project to base model Mac Mini M2 with 8 core CPU and 10 core GPU. And it packaged much faster than 1060 3GB
To which Nvidia GPU base 10 core M2 GPU is comparable?
Im currently stuck between choosing 4060 ti or 6800 GPU
and upgrading from current ryzen 7 3700x to either 5800x3d or 7000 series
red cpu and green gpu nowadays kinda meta, maybe eventually there will be something of blue team
One can hope i guess
Blue team slacked off on cpu's so im not holding my breath
More competition is usually a good thing tho . Nvidia CPU please?
Which ones? I went for 7950x , am i innfor a treat?
I always thought that was my motherboards, being crap
Less issues with ram this time around
So last week my dad's computer went into sleep mode, when he woke it up, I think he said it was slow to come back, and then one of his HDDs had disappeared. Since then, everytime he turns it on in the morning, it sits at that boot start screen with the "american megatrends" for a while. Once or twice it wanted to put him into the settings menu. I'm guessing that the HDD is dead, or nearly, but would that cause the system to take a long time to boot?
depends... i wouldn't start it at all if not necessary in that case
first result of google says a dead drive can block the computer from booting 😦
it could be close to dead
A friend of mine had a similar issues with an almost dead hdd and it took anywhere from 30min to hours to boot
could be a broken cable, mainboard or drive... but from the sound of it it's most likely the drive
sounds like it was trying to boot for over half hour just now
if there's any important data on it, you should only turn it on once more to make a copy, and by copy i mean a copy on "bitlevel" not on the filesystem
he's been using his computer for a few days since it happened, and he turns it off every night. And the drive hasnt appeared at all.
so it's not his main drive?
by bitlevel, like with a drive copy program?
no, its one of his extra drives, but its apparently got lots of photos and videos on it.
pretty likely dead by now
I think I ahve a drive copy program but I dont remember which one. any suggestions?
I hope we can salvage most of it 😦
acronis true image was good like 10 years ago, so if you find an old iso of it use that 😄
if you get a bitcopy of the drive, either you are lucky and can use it, or you can run stuff like photorec on it
which works kinda good for photos etc.
as long as it's a harddrive and not an SSD
From what you described it sounds like it's stuck in the pre-boot sequence, it can get stuck there if you have a faulty connected device
Can be anything from your pc mouse, kb and HDDs
yea but disappearing harddrive is kinda indicating that it's the HDD
yeah
and they usually always die when they try to startup
Yup, thats what I guessed too
its got me eyeing my own HDDs and worrying about backups
spinning things like to keep spinning, stopping and starting is the hard part
yea, i got hit by a hdd crash in my early days xD
I get hit every 5-10yrs 😦
my old laptop would always BSOD during the annual road trip
and you still dont make backups?
every year for 5 years
I do
but now i use a desktop
lot less things go wrong
and almost everything on the HDD's can be re-downloaded again
I've got incomplete backups of some stuff, but not everything. Been low on funds for affording lots of backup drives, especially since I have many large drives
yeah
i have an 8tb data center drive i back everything up to now
just barely fits a total backup of my whole computer
the local disk might be small but its one of those ultra stable high end SSD's that cost way more than the standard ones do. not a single issue in 5 computers and like 4 years
its mostly my UE projects that I'm worried about, most of the rest is either downloadable again, backed up, or not super important
back them up to cloud?
i think Laura always likes to mention how you get 50GB for free on Azure
which should cover the important bits on an UE project
never really trusted clouds....
you think MS is gonna release your game for you?
If I shuffle some data around, I should be able to back up most of the important stuff on to a drive thats not really doing much right now.
but crap... my dad wants to do a video chat so I can try and walk him thru disconnecting the dead drive so he can use his computer
lol, two HDDs in his system, one made in 2021, the other 2011 😬
yes if they know how awesome it is
bet the 2011 one goes strong
i have an old 32gb IDE drive, nothing will kill it
Time
its been dunked accidentally into a pool, survived a small battery fire, and now open housing around a long hair cat....
ah, a third drive was also an HDD, and was only a 1tb, also 2011
its write speed is in KBps
he said it was small so i thought it'd be an sdd
I also have this one DVD-RW that is absolutely scratch resistant (within reason)
for whatever reason it has survived a TODDLER
find me a more hazardous to tech environment than a highly autistic toddler
(within reason)
k so it was the third 2011 drive that was preventing it from booting
so now he can use his computer, now its just a matter of trying to recover the dead drive
all we can do till tomorrow. Thanks for the help tho
so two 4090s is the best option? What do you think Laura?
From my experience only benefit to rtx 6000 ada is the memory, in every other way it's slower than a single 4090
2 4090s will be on par or outperform 1 A100 80GB, but again less total memory
You can get that 80GB of VRAM for cheaper with 4090s but complicates training or whatever you are doing, you either need model sharding or some form of parallelism, which comes with its own issues
Isn’t Crossfire/SLI a thing of the past now?
It is, you don't need it for ML tho
You can run parts of the model on different devices without the gpus actually being directly connected (if they are in the same system) with SLI/nvlink (tho nvlink speeds up communication between gpus)
Ah nice
Which build is better for gamedev?
They're... The same specs?
You've changed a cooler PSU, case, and SSD brand
But your RAM is low in both of those. Double it to 64GB
are gigabyte video cards and psu's still explode?
I have ran a gigabyte windforce gpu for 4+ years no issues. idk about psus though
I have a gigabyte mobo and gfx card.
Highly recommend not getting the mobo. No issues with the card.
I heard newer gigabyte cards pcb is a bit iffy but could be user errors.
Many have asked this before but answers are always extremely biasd towards photorealistic high performance AAA games. So I'm asking. Anyone has real-world experience developing on Apple Silicon M3 Pro with unreal 5.3^ ?
I just can't stand constantly loud machines with bad battery performance. So I do not want to get a windows laptop with RTX at the moment.
I do have desktop workstations in addition (one with a 4090 and one with a 3080) but consider buying a macbook pro m3 pro as my portable dev device.
I have a project. Uses world partition on a 5x5km map. Stylized. runs with about 50 - 60 fps in the editor on my macbook air m1... Stylized 3D work without lumen and nanine is my main focus. Macbook Air throttels after a while because of heat + shader compiling is quite slow.
Any -realistic!- experiences?
One solution worth exploring is get a desktop pc keep it in a separate room and remote into it with your air if you have an Intel Mac you can use bootcamp and your battery on the Mac (if older) will likely perform better
I also want to get a new mac for native development. I already remote into my pc via moonlight and sunshine
So it is not a question of if I keep my macbook air - I just want to see my perspective on using a new m3 pro for unreal development and what peoples experiences are in a real world scenario
Wait til m5 if you can m3’s are still about half way there
You’ll run into limitations in the Mac directly w unreal
I mean - it runs pretty well already on my m1 macbook air without to much trouble like I said. It throttls. And I just want some realworld experience from people using a mac on real projects
It is also not a question of waiting - I do develop professionally on the devices and need them in my day job too (apple vision pro) - it is a question of what people with m3 macs have as an experience in combination with unreal.
I hear ya I tried in here also you won’t find experiences w Mac and unreal They’re gonna be a force in a few years but essentially you’ll have another air in a couple years
Just one question: did you ship a game that was developed on a mac?
Nope ! And I highly doubt you’ll find anyone in here that did and if you do I’d love to hear from em also
No offence: but my question was formed in a way that I try to get feedback from people who have real-world experience. I do get answers like "mac not good for unreal! get pc with 4090" all over the internet already 🙂 But there are people who ship games on ipads made with unreal engine and also people who develop for apple vision pro with 5.4 already
Macs are good but unreal and Mac is still a wip
Apple and epic have had some bad blood im hoping they iron it out
🙏
I really hoped my question would skip this kind of conversation 😅
Yea me too 😂
Just to make it clear again:
I do have the macbook air m1 - which runs unreal very well for what it is.
I try to find real-world experiences here to compare against my current experience. for example: how much performance will I gain upgrading from m1 to m3 in unreal engine. It is not a question of waiting. it is not a question of epic vs apple. It is a question of did anyone use unreal on m3 macs and how did it work out so far? so effectively I didn't even ask for an opinion of anybody who does not have experience... I really do not mean it as an offence! 😇
Your ask is a bit biased ! And no offense with that. I’m speaking from a Logical standpoint as a Mac user and speaking on the point that as long as os is updated fully it’s gonna be the same m1 air to m3 max spec’d out. Smell me? 😤
…Compatibility wise that is
My question is biased towards people who developed with Apple Silicon M3 and unreal engine, yes!
Like you can build out w the new Mac for better performance than the air and then open it on pc where stuff isn’t compatible
Im sure you prolly do this already .. sorry for giving frustrating answers you already came up w
Is what it is. Mac and unreal is limited still
Thanks for your opinions.
Looking forward for answers from people (if there is someone) who have real-world-project-experience with new Silicon M3 Pro Chips.
I don't care about nanite or lumen or photorealism.
I fully support you on your journey of finding an m3 user who’s shipped. My partner works for Apple so I do have an insider pov on somethings I’m unfortunately unable to elaborate on further. 😉
Someone anyone please chime in and defunct my opinion about Mac users w unreal are equivalent to a person going to the gym in sandals 🙏🙏🙏
As a cheaper alternative, consider buying a cheap laptop to use as a parsec slave, and remote into the big dev machine
Thanks @fresh fog I already do that with a very good moonlight + sunshine + vpn setup
my initial question was also not one of cheaper alternatives
I'm looking for experience with projects natively developed on mac (especially M3 macs).
In addition to a portable dev device, I want to be able to develop natively, I want to make builds for mac, I will have to deploy to the apple vision pro in the future and therefore get into development for it.
I really just would love to hear (if there are users) real-world experiences of mac users.
I nerver stated that the experience is better than or greater than or whatever.
Hey I’ll go to the gym in sandals sometimes and do some biceps and chest time to time. No shame. Just sayin ! 🩴🏋️♀️
😅
I know it is hard for many people to understand that not everyone is interested in the high performance features of unreal but is focusing on minimalist-stylized projects. I don't care about nanite, groom, lumen, metahumans, megascans.
Just for an example: I can run the crop out project on my m1 macbook air just fine. it is a pleasent experience beside the low frame rate of 40 fps (playing in editor) and at 60fps working in the editor. I work on another project with world partition on a 5x5km map - many PCG scattered objects, hlods, whatever... it runs at 60 fps
What my goal is with my question is to get a perspective on how the experience is or how much of a gain I can expect for the kind of work I do with the M3 macs. And that answer can not come from people who do not work on macs (natively) with unreal 🙏
Mac design aesthetics are top top
And I’m a motion designer so I do my 2d stuff it’s the gpu incompatibility that kills the shader compiling I am afraid
I have a question unrelated to my above tangent.
I want to update to windows 11 and I need to enable TPM 2.0 to do so in BIOS are there any dangers or things to watch out for w that ? And same w windows 11 update anything to lookout for in general? I did it on my laptop takes a minute to get used to ui but seems like some performance improvements overall
One thing is for some reason I didn’t need to enable tpm 2.0 on my laptop it just did it on its own somehow 🤷♀️
*just to correct my self @forest jay -> cropout is running always at 60fps with FXAA on a 2020 macbook air m1
no dangers whatsoever, I've updated to win 11 since day 1 I never had any issues
Does anyone have a contact at any of the RTX 6000 partners by chance?
why you gotta troll me on low slep
actually though why can't I find a 6000a listing anywhere
jeezuz
interesting points
Ok! What is the issue with keeping it enabled ? Just out of curiosity
What you’re saying is if I enable it then I can’t backup my files ?
Ahhh I get it all the encrypted data won’t be backed up or something geez it’s a bit complicated to understand. Thank you for guiding me to the answer ! I’m just gonna turn it on to install and then off 🙏
New q; if I set my cache for unreal to an external ssd rather than my native drive will I experience negative performance difference ?
External SSDs are always slower than regular SSD, I don’t get people’s fascination with them
just use usb3
this looks about right to me
Store and share your data with the elegant, all-metal casing SanDisk Ultra Luxe USB 3.2 Gen 1 Flash Drive. Spend less time waiting and more time doing with super-fast transfer speeds up to 400MB/s. This fast flash drive adds up to 512GB of storage for your content and holds it all within a beauti...
I think I might grab one or two lol
portable. 3.1/3.2 usb are quite good and have decent speeds
collegue used it to hold workspace when travelling (as laptop storage was too small plus cant encrypt)
Still slower than native yeah?
well, yea
but you dont need to disassemble laptop / pc when want to change location
ig, but there’s such things as repos
But I suppose if you’re a travelling salesman coder, you might need it
i have a PC case with external SATA dock just to use external drives (plus usb 3) - was super useful.
That’s neat
I found this news article about the mb I just installed saying there’s issues w it. How would I know if mine is effected ? Damn algorithms put this news article in my Google feed noiding me out a bit 😫
I think what I can take away from the article is if the mb is doa then it’s affected like it wouldn’t work at all right?
if your works then you fine, plus the video in that article explains symptoms
Thanks for confirming it’s all good
Im having downtime at working and running internet speed tests 🐰 🐢
It’s super weird I’m finding after running both single and multi test on my brand new build w new nic plugged into ethernet getting close to a gig per second down while my uploads are like 60-100 and ping is 15-19
Then I checked my 5g wifi speed and its 500 d 50 up
But what’s puzzling me is on my 2015 mbp on 5g wifi I ran a test for the heck of it and getting 9-13 ping and 500 d and 300-500 up which is way more balanced. I’m about to test ethernet on that one but I’m kinda puzzled as to why a 2015 mbp running bootcamp on wifi nic is crushing my new build nic on ethernet
^and 5g wifi
And after testing on mbp ethernet I’m getting 800 d and 350 up what the heck!! And 12 ping lol. Why my recent release z790 msi tomahawk being a rat w my bytes? Driver update needed maybe ?? 🤔
Can use parsec to access it, if you have a good system should be fine.
what is the realistic max speed of a wifi 6 connection?
have a 6E router and a wifi 6 chip in my desktop
There’s no way to give you an exact number, it depends on many factors. Distance to the adapter, number of floors, walls, what’s in the walls, how good the adapter is, etc.
The desktop should have connected to the router by cable. It would be the safest bet.
The PC is very decent, the laptop is below average
And planning to connect via wi-fi
I actually just finally set up port forwarding for outside of my network w rdp now trying to figure out parsec port forward, I think that’s gonna be the one challenge out of network is to set it up while not physically in the location and if it goes to sleep or freezes you might need a mate to manual reboot. Unless there’s a function that goes similar to wake on lan that’ll reboot when stuck I am unaware of 🤔
Another minor but important detail is if your ip happens to change may want static ip setup in addition
That and make sure to have a decent connect because depending where else in the world it’s located ping gets higher and higher further away it is
For instance i am in Europe and i connect to U.S. servers all the time w vpn and average ping is like 120 at best
WOL should also wake it from sleep
also i would use some kind of VPN to login at home, unless you really want to trust MS and their poop
ususally a bad idea to open any service on public ports
Hi! I'm looking into setting up a CI server (basically build project, run unit tests and package project), but I don't know what hardware to use. I thought about mini PCs/NUCs, because they are cheap, silent and have low power consumption, but I don't know if a NUC is going to be enough given the price range I'm moving in (400-500$). So, I also considered an old server rack, but I don't know how future-proof that is. Does anyone have something like this working? Any advices?
from all the things that haven't changed in the past 20 years... 19" server racks is one of them
they are meant to stay for probably another 20 years
That's true. I was also wary about compatibility with W11 and UE5, but I don't think that should be an issue either
Yeah, I'm not shooting for super fast builds given my budget
Would you say 32 GB is enough? I was planning 16, but from what you say I have the feeling that 32 should be the minimum
Thank you for the info, I was unaware of that rule of thumb. Probably 32 then, because I doubt I can go beyond 6 or 8 cores with my budget
Oh, that's true, I was thinking 1.5 gigs per core, not per thread. I'd love to go beyond 32, but I don't think I'll be able to do that without spending more money than I'm willing to
I'll look into 12-14th gen Intel processors, thanks a lot for the advice
Hello folks! I'm starting to plan my next pc and would really appreciate it some advice on it, I would like to put together a build that can last a good 4/5 years.
I'm currently working on my free times on a UE4 retro FPS (think mid 2000s visuals) which already pushes my laptops 16gb of ram to its limits when making a build (this is one of the reason I'm planning a new build), but I'm planning on working on UE5 for my following projects.
My current question at hand is about the CPU, as I couldn't find much benchmarks for UE except the puget systems ones (https://www.pugetsystems.com/labs/articles/unreal-engine-intel-core-14th-gen-vs-amd-ryzen-7000/), I'm thorn between the i9 14900K and the i7 14700K. Both seem like good options really, specifically I don't build UE often (but that could change in the future), only the project. Is there much difference between the i9 and the i7 in this case?
Thanks!
ryzen 7900/7950 (pref) or any of the two intels you have (not an intel fan anymore), some decent (4070 or 4080) gpu, 64gb (2x32 extendable 4x32) ddr5 ram and 2tb ssd will be enough for next 5+ years
IMO it a bit weird chart for engine compile (since my 5900x was building engine in about 25 minutes) to see topmost intel cpu building engine in 28 minutes while amd took 31 minutes or so. but that is like 3 minutes difference, don't think you will be building engine every time
interesting! and yes youre completely right that im not gonna be building engine often, actually this makes me wonder if its worth to go for the i9, as its more expensive and I believe it alls consumes more wattage (and gets hotter?)
I’m having trouble deciding between the 7800x3d and i7-13700k I will be using blender, unreal, and playing video games I think both cpus will do well I just don’t know if the productivity boost for the i7 will make that big of a difference I do have a budget of 2k so if their is something better I will consider it too
i'm now kinda fan for amd for now for heavy load / work (still able to cool things without going into liquid cooling) intel cpus are as good as electric stove rn
yep that seems to be the case, I was thinking on going for a liquid cooling AIO solution for that same reason...
https://pcpartpicker.com/list/Mh3Ht7 or this https://pcpartpicker.com/list/gsprBL (only difference is motherboard and cpu)
Part List - Intel Core i7-14700K, Radeon RX 7900 XTX, NZXT H9 Flow ATX Mid Tower
Part List - Intel Core i7-13700K, Radeon RX 7900 XTX, NZXT H9 Flow ATX Mid Tower
re: 3d printing, whats my best option for printing negatives for casting?
depends on the shape. I had success with PLA negative for simple shapes. For more intricate shapes majd a more flexible material is maybe better.
for doing polymers and metal casting, do I go PLA positive -> Silicon negative -> final positive?
that can be a totally decent workflow, yeah
What've you tinkered with?
I just printed some negatives and made some parts from silicone
I did not have vacuum chamber that time, so it was not great
Nice shower head parts
Hey guys!
After many years I want to start over again with UE development. Currently I am building a PC.
What are your experiences with AMD GPUs?
I thought about getting a RX7900XTX but I read in many forums that a Nvidia card is better for Unreal development.
I hope someone can help me 🙂
Thank you in advance 🙂
hey guys I do have a question right now I have a 1tb ssd which won't be enough to store all of the projects etc I'm gonna do. I'm using 2 external HDD for other files but for example on the city example pack, the wait times are REALLY REALLY long (like 25 min to starting the project to loading all the assets). I have a 13600K, 64 gig of ddr5 5600 ram and a 4070 super. The long load times are only due to the project sotred on the external HDD right? because in my case unreal is sotred on my NVME. So should I invest in another nvme and if yes should it be a 4.0 or 3.0 nvme or would an internal HDD be enough to avoid atrocious long load times like these?
AMD cards are great. Nvidia cards can actually have a ton of issues with unreal at times.
The cheap VRAM is also great, as unreal likes VRAM.
I'd definitely consider it if you don't need to pay the Nvidia tax for anything else you use.
You don't want unreal projects on a HDD, it will be slow. Only do that if they are seldom used.
An NVME also isn't necessary. A SATA SSD, either 2.5" or M.2, is more than quick enough, and you'll normally get much better $/GB. Well, at least for the 2.5" ones.
(Don't worry if you've run out of mounting slots either, they don't actually need to be mounted. My 2.5" SSD's are completely loose)
Yeah, can't say I've noticed many either tbh
ok thanks a lot
I won’t be starting unreal on the current build I have because it will not be usable at all but I’m excited to make this new build I’m waiting for a buyer for my pc
question, when i play a program in full screen all of the sudden it now shifts every other screens windowed program over a bit
playing fallout 4, and when im playing, VLC refuses to stay centered on screen 3
an hour ago it didnt do this
the only thing different is i bought a key for allstartback
anything better?
than vlc
but also free and simple
what might cause one screen to freeze, the other to flicker from signal to no signal, while the 3rd is normal.
frozen one is connected to MB not GPU
flicker is a weird duck screen but plugged in to GPU HDMI
main screen that wasnt affected is DP to HDMI
happened when i tabbed out of Fo4 while in borderless full screen
weird part is this ONLY happened when i was playing with borderless fullscreen
I have also noticed random squares that are crosshatched black on the DP monitor. they dont show up on the others even when connected to the same GPU, would that be cable, screen or what?
idk if i have adaptive, im running pretty much factory settings windows 11 and my 3060
no voltage changes or anything
where is this?
checking
which of these is it in? cant find that option:
i guess?
tbh all my screens are pretty much "hey what was someone getting rid of"
the most expensive screen i have is the 42 inch tv
and its 9 years old
no the pc is nice
the only potential fault was the PSU i initially installed blew a capacitor early on
replaced with differnt PSU and things fine
the screens are all weird and pretty random conglomerations
does your cpu have a built-in gpu? maybe hybrid mode is enabled which causing issues
its a 12700k
i know my 42 inch tv is plugged into the MB since i havent gotten around to buying another DP-HDMI converter and its max res is 1080 at 60hz anyways
actually it may not even be 1080p... that screen is ancient
its a 5 inch thick LED screen from 2015
well, it does have onboard gpu.
so there could be an issue when gpu screens work fine and embedded gpu connected via mb port lacking intel gpu drivers
could also explain why it is in minimal resolution
oh the tv itself is minimal res.
and its not having any issues
its the DP to HDMI port dedicated monitor that is
does DP/HDMI support touch screen or is that going to need another plug in of some sort?
ok usb is fine, didnt know if i needed something special. ive always liked using touch screens because they arent as affected by my muscular issues. mice tend to fidget, expensive high quality or cheap walmart branded ones
Hello, my beloved mechanical keyboard of some 12 or more years has some dead keys 😦 i figure i can simply replace it, but what with as all the recent corsair stuff doesn't seem as good as it used to be, any suggestions? (i like the keyboards without a numpad)
Greetings!
Quick question
I'm going for an GPU upgrade
For the use of unreal engine should I go for Nvidia or AMD
I may go for 3070 or Rx 6700xt
whats your current?
well, both will be a decent upgrade. usually more vram the better for UE. rest is up to preferrences/experiences.
you can check discussions above (they're quite often)
i have a 6900xt in an all amd rig, not sure if i would go amd for my next rig
i have never used AMD gpu
in my experience amd drivers used to be very problematic, it got better in recent years
never had issues (other than sometimes rolling back driver to skip buggy version) with nvidia
Thanks!
I think I will go with the XTX Card 🙂 as I want to start with game development and Ray Tracing is not important for me, I think its the better go.
Thanks so much!
You can still ray trace on the xtx btw :P
Yes I know 😅 but I would take cheaper VRAM instead of more ray tracing performance 😅
And everything in 1440p 😅
I've been running team red for 5 years and had to piss about with drivers exactly 0 times.
I have another machine with an nvidia card for 9 months and had to upgrade drivers 4 months in due to artifacting.
My previous gpu was amd and Nvidia right now and I had about 0 issues with both
im pretty sure that unless your really trying to tweak the settings, either company works just fine
just need to see where intel GPU's grow
idk i havent really encountered anything
has anyone tried to run a builtin raid mirror with m2 drives on an asus motherboards? setting up a workstation, atm i have Asus ROG STRIX B650-A with 7900X, sata 256gb ssd with OS
goal is to have a workspace storage with relatively high "resilience?" for quite heavy dev work load
with what i can go for:
option 1: 2x 1tb samsung 970 evo (tlc) drives that i want to use as workspace (raid1 for safety / read speed) for mb m2 slots
option 2: previous but try find a pcie m2 raid controller (can only get GLOTRENDS PA20)
option 3: dont bother with raid get a 2tb samsung 980 pro (mlc) for workspace and a 2tb sata hard drive for cold backups in manual mode
Raid0 isn’t going to give resilience, not sure if you aware of that. It’s purely for speed and combining drives
i know, mirror
as long as it will prevent total death of drive and keep second one safe.
oh, whoops. raid1
Yeah raid0 you would lose the stack if a drive dies haha
Most do raid 1 or raid 5 but raid 5 you need at least 3 drives
Not sure your use case but what I’ve done personally is use source control/backup to cloud/on prem servers
My methodology is if the drive fails, swap the drive and download from server again
heavy unreal development, programming / large projects.
So if it were me I’d lean towards option 3
my old workspace used to have sata sdd / sata hdd cold storage with monthly scheduled backup runs at night
And if you really wanna cover your basis backup your backup drive to a cloud solution 😂
There ya go yeah
well, source control is obv, but i can't keep entirety of 2tb workspace in cloud. network is super limited atm / large storage is problematic to buy too
Certainly yeah. I ended up (still upgrading) building a server and upgrading my network to handle that kind of traffic. Little cheaper than paying for 30TB in the cloud 😂
my raid setup is actually still pending additional drives
with pcie raid controller or a nas? or software
It’s a pretty basic solution right now. I’m using parts from a previous desktop build and then just using intel raid controller in the bios
I was experimenting with software raid controllers on two of the bigger drives until I get enough for raid 5. Software is fine but it is slower than bios or a raid controller
I’m running a heavier render in c4d that’s utilizing cpu. W overclocking on I’m getting a minute less render time but my temps are touching 85-100 and 100 sustained on a couple cores is this something I should avoid or cool to roll for like 6 hrs ?
you need a better cooling, temps over 70-80C are pretty bad for that long time. most likely go liquid cooling
Gotcha ! yea if I wanna use overclocking I guess that’s the case otherwise without it’s sustainable. Thanks
even 7900x has 95C limit
Hello guys,
I need a whole PC system for 100% Unreal Engine usage (mainly VR Applications).
The computer will be used for industrial VR sessions.
Intel and NVidia are set as brand from company IT.
What components or prebuild would you recommend? I thought about, but I have no clue about which brand for gpu, about cooling system, powerdevice etc..
CPU: i9-14000k GPU: RTX 4090 Ram: min. 128GB
Budget? 5-6k €?
If there are prebuild it should be a german seller.
I need to get on this underclocking tip like set to overclock but give a limit of 85 somehow like ur doing
That’s hella easy I’m gonna do that
setting mine to 185 instead so i can fry my eggs in the morning i think
With some exceptions, brand really doesn’t matter. It comes down usually to aesthetic and features you want. With a GPU, some brands preclock the cards higher. So if clock speed is what your after you might consider one brand over another but you can also manually clock the cards higher yourself 😂
I think I would cry if my CPU ran that hot 😂🤣
What about 95°C?
I would cry if my CPU ran that cool
I’m not even sure I wanna ask what you’re running at 😂
nah it only gets to like 85 max
Highest I think I hit was 92 at that was doing a cine bench stress test
most of my demanding applications won’t see temps higher than 50
went to a 2070 super to a 4070 
Is this the way to do it ? @iron zenith
Ok ! Yea that makes sense I also noticed this was set weird I don’t have a water cooler I have the noctua dh15 🤔
yall, a friend seems to be having a a GPU or MB issue.
their problem states that the screens go no signal when doing graphically heavy things, and a crash reboot error logged to a GPU driver.
is there a way to tell if its the GPU or MB?
also how do i get into the base settings to throttle my stuff, the amount of heat produced playing freaking fallout 4 is insane
Ok, i need help setting the best power settings for my computer. Factory default just runs too hot
most of the stuff in my computer is MSI or corsair
with 12700k cpu
and Noctua NH-U12S Redux for cpu fan
i think my gpu is much better now. on to the CPU
Do your homework. Otherwise youll buy a $1000 motherboard that does nothing for you. I just finished my new rig this week. Havent upgraded for about 10 years ( was a 6700k with a 1060 6 gigs) but could still run Unreal. New rig has every part handpicked and ... it worked. A rocket ship. I'm so happy. Montech Sky 2 case , 14900k with Vengance pro 64 gig ( 2 sticks ) running at 6400 . WD850x 1tb and 990pro 2tb. Gigabyte Elite AX with a matching cooler. the sweetest thing Ive owned and my first computer was in 1982. Top end MBs have maybe direct access to run cpu to a high end drawing tablet , and of course DDR5 m.2 ... dont waste your cash because to match up that system up you will need more than 6k. ( cdn) . The only reason I bought a 14900k instead of the 14700k which would have been just fine was because it was so long since I waited between builds ... it smashes!
Stay away from AMD. You will be so unhappy. Hit Youtube...
Completely baseless comment
I mean there can be issues, but a blanket statement like "stay away, you will be unhappy" is baseless imo. It's not like they have the reputation of being always the worst option, unless we travel back to the dark days of the FX range
There are definitely reasons to consider going intel, because it's an extremely solid lineup, and ryzens have been getting seemingly complacent (see: them cheaping out on the coolers and such).
However the initial question was about GPU's so if you're running an Arc, I'll pray for you :P. For me, it's one of those, that if you don't need the Nvidia tax, an AMD GPU is much better value for money and you don't need to play driver roulette :P
Can I ask what problems you had CPU side? I've been considering a new system so it's useful to know
I was considering intel anyway because often ATM it's cheaper and still let's me use ddr4 ram for the time being
Heard about the cooling, scheduling and popping. USB is a new one
I'm really not sure if it's greed or laziness because they've been the first choice for quite a while
Oh wow. That's odd.
must be one of those windows exclusive features
ok, but they usually work in my experience
maybe it's a vulkan thing which is less tricky 🤷
and I bought and AIO! It rocks up, the pipes are kinked but Id already started stripping my PC so I had to put it back together again 😬
In summary: 1) Norton, McAfee, AVG and really any of these antivirus suites, 2) VPNs, 3) PC “Performance boosters” 4) Browser extensions 5) Bloatware on prebuilt systems 6) Pirated software where you don’t completely trust the source
We have talked about what software every PC should have... but today we are going to talk about what software you should NEVER install... EVER!
Get an iFixit kit for yourself or someone you love at - https://amzn.to/3IDDkj9
Get your JayzTwoCents Merch Here! - https://www.jayztwocents.com
○○○○○○ Items featured in this video available at Amazon...
I haven't had any of those things installed in decades.
Other than a few browser extensions.
(not shopping related)
you'd better write more detailed for vpns and extensions
free and untrusted vpn services are not secure in any way and many are just trash. But in general you would use VPNs for corporate needs / remote work / region locks and others.
bloatware and tracking extensions are bad indeed but that is just how internet works, everyone likes easy prey
I hope you aren't using free and untrusted vpns for corporate needs 😂
I dont trust any network
good companies do provide corpo vpn servers to connect to (otherwise internal domains will be inaccessible)
I know. I'm on one right now! I was just poking some fun 😛
🙂
Watch that part of the video, he explains why
I don’t trust any of them anymore since I had an Adblock Plus or something extension that compromised my passwords
I might be using that shrug
Google marked it for removal due to it being compromised, that’s how I found out the culprit
I took Laura’s advice and use Vivaldi if I wanna skip ads
Is that a browser?
Yeah a Chromium
I’m sure we’ll eventually find out it was tracking us all along but 🤷♂️ 😀
I use Adguard, it's been my favorite for a while
Ublock was the only one to block youtube ads for me
Adguard is still working for me on YT
I also use SponsorBlock, it can skip all kinds of useless stuff in YT video
your here blocking videos? im just watching raw
very Brave
Fellow devs, I'm upgrading to 1440p cant decide between 4060ti or RX 7700xt? any advice?
Is it dev usage or gaming? If for UE, the one with the biggest vram
main use would be coding and Unreal Engine but other than that gaming ofc 😄
then it does not matter, just pick your favorite color or based on gaming charts
using extension that was resold to suspicious people multiple times? asking for trouble, lol. using uBlock Origin and Privacy Badger + customized handmade extensions (as it is quite easy to develop extensions for FF and share it between own devices)
8840hs opinion for ue5?
I have a 7745hx on my UE laptop, honestly okay, not that much slower than my desktop 13600k. But I dont compile
With the igpu?
Yeah, and a 4060
The gpu
The 4060 is not external, the laptop has the 7745hx + 4060 dedicated
What the hell is an iGPU, is this a new Apple product ? 😀
I am talking about the 8840hs
yes I know
is that good?
it seems like next generation of PC components will require installing fire suppression system into the case...
Also your gpu will need an m.2 ssd
https://www.guru3d.com/review/asus-dual-geforce-rtx-4060-ti-ssd-oc-edition-with-m2-slot-review/ asus got you covered
We review the Asus Dual GeForce RTX 4060 Ti SSD OC Edition, a graphics card, a unique offering that incorporates an M.2 SSD slot. Designed with small form factor systems in mind, this card enables system builders to access a full-bandwidth M.2 slot for additional storage without the need for a second PCIe slot.
all i can imagine is glowing drive
Efficiency!
but wouldnt that risk heat damage to the ssd?
The M.2 2280 slot's position on the back of the card ensures user accessibility and is paired with a thermal pad to ensure the SSD remains cool during intensive tasks. Asus has engineered the card’s PCB to enable the GPU's cooling system to also encompass the SSD, mitigating potential heat issues and, in initial tests, reducing SSD temperatures by 10°C.
key term there initial
I think it'll be fine so long as the dust is kept off of it and the thermals can function optimally. The card itself draws less power - 160W TDP - and the SSD will receive cooling from both its own thermal pad AND the GPU's cooler. I think it'll be okay. IF it isn't cleaned with a blower regularly, that might cause problems. 🤷
I'd love to see a performance comparison between THIS 4060 TI 16GB and the regular one.
Yeah, they benchmarked it.
It seems to be efficient, if the writer is to be believed.
I'd still prefer a 4070ti, but yeah, the thing works fine.
Just checked. It's very slightly less expensive than the standard 16GB 4060ti and this one has only 8GB. Might not be attractive if you'd like that extra 8GB on your card.
The 4070ti 12GB is about 50-60% more expensive than this where I live. I reckon I'd go for that instead, given the performance difference.
🤔 Maybe one day we'll have an all-in-one CPU-GPU-RAM chip.
We do. Apples M series chips 😂
🤣
Though all in one really makes me raise an eyebrow feels like Jack of all trades. Good at everything great at nothing 😂
I did mean a lazy-dev-functional one, but lmao. 😄
Yes that’s fair haha
AMD did create a CPU-GPU combination for 1080p.
I am not sure if it is on the market atm. I only saw that article in January.
Huh 🤔
Ah, AMD Ryzen 8000G.
I’m an intel fanboy but man the ryzens are starting to tempt me
Supposedly awesome at 1080p and sucky upwards. 😄
That’s still impressive
Yep. It got me excited for sure.
For a cpu/GPU combo
Ah, it's in the market since Jan 31st.
Benchmarked. 🙂
Oh nice I think I saw one of those maybe it was a different one but someone was playing warzone on medium with no GPU
and honestly that’s not bad
That's probably it, yes.
Is there a general downside to having the gpu running all the time besides general wear on components
Not really. Arguments go both ways for keeping your computer on vs turning it off at night
Im talking under load
Assuming your machine's clean, thermal paste is in good condition, cooler isn't broken, etc. etc., in good conditions, no, there's no problem.
The only issue a friend of mine faced was that his PSU blew out, but that was because it was a generic one and not a top-of-the-line, efficient component.
I think those Titanium/Platinum rated PSUs will do just fine overnight for ages.
Let's. It forget the power bill and saving the planet etc
Why you’d need to keep your cpu under load for days on end is another story
Yeah, that's why I didn't mention the electric bill and stuff.
Unless you have some week-long rendering to finish, you wouldn't need to keep your machine running.
Has anyone here updated their mobo BIOS more than once, or maybe a couple of times?
If so, have you ever had to update the BIOS of a new mobo that you purchased? Is it easy to do without bricking the hardware?
ye its easy
Just don't turn it off while flashing.
Yeah, this was one thing I was concerned about on desktops.
With my laptop, I don't have to worry about that. The backup inverter handles the load change when there's a blackout.
With a desktop with modern hardware, I wonder if I'll need to invest in a bigger inverter to handle the change, so I don't brick it especially while flashing.
You aren't going to brick it.
You can just flash it again?
It's just going to work.
Don't flash it during a thunderstorm or blizzard or hurricane or tornado
or get a UPS
Just bought a Gigabyte Z790 for my 14 series. The board actually came with the latest Bios for the 14th Gen. That was unexpected but awesome. As for updating the Bios... it couldnt be easier! You don't even have to have any components plugged into the board, just power and your USB stick with the new bios. The board had 3 different options for bios updating. Nice and EASY!
Cool. Didn't you need to execute any file from the USB? Does it automatically run?
I had to pay the shop to do it when buying my mb since I had no 12th gen intel to temporarily use (and no usb bios)
Ah, there is that option too. 🤔
Unless it’s a server not sure why you would. Server grade parts are more designed for that
Fyi house is net positive solar powered. Generates 20% more than it uses, energy bill is negligible
Self hosted game server for friends.
what solar panels you use? what company?
not sure, just know we paid extra to have them over generate
house uses ~1MW a year, we paid for a system that makes 1.2MW
only cost about $40,000
oooof, you could get a couple cars with that amout!
Hey guys! I'm starting to build my pc and I want to know which CPU do you recommend for UE5. Also, I want to use houdini and embergen. Thanks!
Hey guys! https://pcpartpicker.com/list/8PVFL9 Is this a Good PC build to run Unreal Engine 5 at full compacity no issues for someone who wants to do programming game dev work? C++ (No Blueprints)
Part List - AMD Ryzen 7 7800X3D, GeForce RTX 4070, NZXT H6 Flow RGB ATX Mid Tower
not sure about the quality of some parts tho... (never heard of silicon power storage, no good experience with G.Skill)
Only
Silicon Power is a Taiwanese company. They produce 'affordable' storage solutions - both SSDs and NVMEs; affordable being defined as using no DRAM cache in their drives. That makes their SSDs and NVMEs much cheaper than any mainstream solutions.
The downside is that if you are compiling, installing Windows on it, writing a lot of data repeatedly, etc., the drive will slow down to HDD speeds eventually, as the 'front' NAND chips get filled up. So, SP drives are great for games, where you don't have to write repeatedly, and for storing videos and movies.
Part List - AMD Ryzen 9 7950X, GeForce RTX 4070, Lian Li PC-O11 Dynamic ATX Full Tower
wat about this build i found from reddit?
When you eventually decide on the build you want, make sure that the power supply unit (PSU) can support the CPU + GPU primarily, at full load. If you have power blackouts in your area, you will want to invest in a UPS that supports the max wattage of your PSU + 50%, so that when the power drops, the UPS is able to handle the transition and keep your machine running without causing a reboot. The +50% is required only at full load, but it's better to be safe. The UPS will cost you too, especially the good ones.
Disclaimer: I read this on the internet. So trust it at your own risk and ask some experts around you.
yea, even i would pick 850W for that system
even tho 750W should be sufficient, but if you get a new one better be safe than sorry
With the extra watts can also help future proof psu a bit while you can upgrade other parts down the road.
I also read on the internet - which you can totally trust - that the higher watt and better rated PSUs are longer-lasting and won't just wonk out on you. HOWEVER, platinum/titanium rated ones are EXPENSIVE.
I mean generally should take things with a grain of salt, however buying a 850w hoping to upgrade much later isn't really a thing either.
don't trust reddit. always check QVL lists on motherboard manufacturer support page with stuff you going to use
building based on QVL guarantees no issues with parts since vendor tested the compatibility for you
you dont need to go plat, gold is enough and nowadays cheap
An 80 Plus Gold power supply is 87 percent efficient at 100 per cent load, while an 80 Plus Platinum model is 89 percent efficient at 100 per cent load.
This means that a 700-watt 80 Plus Gold power supply will draw 791 watts of power from the wall socket to deliver 700 watts to PC components.
just 2 percent difference at max load
At least Titanium has some extra requirements for efficiency at low load. Platinum is delusional.
